--- /dev/null
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6060
+#define DEVICE_VER 0x0003
+#define MANUFACTURER Handwired
+#define PRODUCT Tritium Numpad
+#define DESCRIPTION QMK keyboard firmware for handwired numpad
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 4
+
+// ROWS: Top to bottom, COLS: Left to right
+
+#define MATRIX_ROW_PINS { D1, D0, D4, C6, D7, E6 }
+#define MATRIX_COL_PINS { F4, F6, B1, B2 }
+#define UNUSED_PINS
+
+#define BACKLIGHT_PIN B6
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* Backlight configuration
+ */
+#define BACKLIGHT_LEVELS 4
+
+/* Underlight configuration
+ */
+
+#define RGB_DI_PIN D2
+#define RGBLED_NUM 4 // Number of LEDs
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
--- /dev/null
+{
+ "keyboard_name": "Tritium_numpad",
+ "url": "https://www.thingiverse.com/thing:2855938",
+ "maintainer": "qmk",
+ "width": 4,
+ "height": 6,
+ "layouts": {
+ "LAYOUT_numpad_6x4": {
+ "key_count": 21,
+ "layout": [{"label":"k00", "x":0, "y":0}, {"label":"k01", "x":1, "y":0}, {"label":"k02", "x":2, "y":0}, {"label":"k03", "x":3, "y":0}, {"label":"k10", "x":0, "y":1}, {"label":"k11", "x":1, "y":1}, {"label":"k12", "x":2, "y":1}, {"label":"k13", "x":3, "y":1}, {"label":"k20", "x":0, "y":2}, {"label":"k21", "x":1, "y":2}, {"label":"k22", "x":2, "y":2}, {"label":"k30", "x":0, "y":3}, {"label":"k31", "x":1, "y":3}, {"label":"k32", "x":2, "y":3}, {"label":"k23", "x":3, "y":2, "h":2}, {"label":"k40", "x":0, "y":4}, {"label":"k41", "x":1, "y":4}, {"label":"k42", "x":2, "y":4}, {"label":"k50", "x":0, "y":5, "w":2}, {"label":"k52", "x":2, "y":5}, {"label":"k43", "x":3, "y":4, "h":2}]
+ },
+ "LAYOUT_nontra_6x4": {
+ "key_count": 22,
+ "layout": [{"label":"k00", "x":0, "y":0}, {"label":"k01", "x":1, "y":0}, {"label":"k02", "x":2, "y":0}, {"label":"k03", "x":3, "y":0}, {"label":"k10", "x":0, "y":1}, {"label":"k11", "x":1, "y":1}, {"label":"k12", "x":2, "y":1}, {"label":"k13", "x":3, "y":1}, {"label":"k20", "x":0, "y":2}, {"label":"k21", "x":1, "y":2}, {"label":"k22", "x":2, "y":2}, {"label":"k23", "x":3, "y":2, "h":2}, {"label":"k30", "x":0, "y":3}, {"label":"k31", "x":1, "y":3}, {"label":"k32", "x":2, "y":3}, {"label":"k40", "x":0, "y":4}, {"label":"k41", "x":1, "y":4}, {"label":"k42", "x":2, "y":4}, {"label":"k43", "x":3, "y":4, "h":2}, {"label":"k50", "x":0, "y":5}, {"label":"k51", "x":1, "y":5}, {"label":"k52", "x":2, "y":5}]
+ },
+ "LAYOUT_ortho_6x4": {
+ "key_count": 24,
+ "layout": [{"label":"k00", "x":0, "y":0}, {"label":"k01", "x":1, "y":0}, {"label":"k02", "x":2, "y":0}, {"label":"k03", "x":3, "y":0}, {"label":"k10", "x":0, "y":1}, {"label":"k11", "x":1, "y":1}, {"label":"k12", "x":2, "y":1}, {"label":"k13", "x":3, "y":1}, {"label":"k20", "x":0, "y":2}, {"label":"k21", "x":1, "y":2}, {"label":"k22", "x":2, "y":2}, {"label":"k23", "x":3, "y":2}, {"label":"k30", "x":0, "y":3}, {"label":"k31", "x":1, "y":3}, {"label":"k32", "x":2, "y":3}, {"label":"k33", "x":3, "y":3}, {"label":"k40", "x":0, "y":4}, {"label":"k41", "x":1, "y":4}, {"label":"k42", "x":2, "y":4}, {"label":"k43", "x":3, "y":4}, {"label":"k50", "x":0, "y":5}, {"label":"k51", "x":1, "y":5}, {"label":"k52", "x":2, "y":5}, {"label":"k53", "x":3, "y":5}]
+ }
+ }
+}
--- /dev/null
+#include QMK_KEYBOARD_H
+
+void keyboard_pre_init_user(void)
+{
+ // Set layer LED as an output
+ setPinOutput(B0);
+}
+
+uint32_t layer_state_set_user(uint32_t state)
+{
+ // Switch layer LED accordingly
+ switch (biton32(state)) {
+ case 0:
+ writePinHigh(B0);
+ break;
+ case 1:
+ writePinLow(B0);
+ break;
+ }
+ return state;
+}
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [0] = LAYOUT_ortho_6x4(
+ KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+ KC_P7, KC_P8, KC_P9, KC_PPLS,
+ KC_P4, KC_P5, KC_P6, KC_BSPC,
+ KC_P1, KC_P2, KC_P3, KC_PENT,
+ KC_P0, KC_UP, KC_PDOT, TT(1),
+ KC_LEFT, KC_DOWN, KC_RGHT, BL_STEP
+ ),
+ [1] = LAYOUT_ortho_6x4(
+ KC_NO, KC_NO, KC_NO, KC_NO,
+ KC_NO, KC_K, KC_NO, KC_NO,
+ KC_H, KC_NO, KC_L, KC_NO,
+ KC_NO, KC_J, KC_NO, KC_NO,
+ KC_LSFT, KC_Z, KC_X, KC_TRNS,
+ KC_NO, KC_NO, KC_NO, KC_NO
+ )
+};
--- /dev/null
+[["KC_NLCK", "KC_PSLS", "KC_PAST", "KC_PMNS", "KC_P7", "KC_P8", "KC_P9", "KC_PPLS", "KC_P4", "KC_P5", "KC_P6", "KC_BSPC", "KC_P1", "KC_P2", "KC_P3", "KC_PENT", "KC_P0", "KC_UP", "KC_PDOT", "TT(1)", "KC_LEFT", "KC_DOWN", "KC_RGHT", "BL_STEP"], ["KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_K", "KC_NO", "KC_NO", "KC_H", "KC_NO", "KC_L", "KC_NO", "KC_NO", "KC_J", "KC_NO", "KC_NO", "KC_LSFT", "KC_Z", "KC_X", "KC_TRNS", "KC_NO", "KC_NO", "KC_NO", "KC_NO"]]
\ No newline at end of file
--- /dev/null
+# Generated Keymap Layout
+
+This layout was generated by the QMK API. You can find the JSON data used to
+generate this keymap in the file layers.json.
+
+To make use of this file you will need follow the following steps:
+
+* Download or Clone QMK Firmware: <https://github.com/qmk/qmk_firmware/>
+* Extract QMK Firmware to a location on your hard drive
+* Copy this folder into %s
+* You are now ready to compile or use your keymap with the source
+
+More information can be found in the QMK docs: <https://docs.qmk.fm>
\ No newline at end of file
--- /dev/null
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BL 0
+#define _FL 1
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Keymap _BL: (Base Layer) Default Layer
+ * ,-------------------.
+ * |Esc |TAB |BS | = |
+ * |----|----|----|----|
+ * | NL | / | * | - |
+ * |----|----|----|----|
+ * | 7 | 8 | 9 | |
+ * |----|----|----| + |
+ * | 4 | 5 | 6 | |
+ * |----|----|----|----|
+ * | 1 | 2 | 3 | |
+ * |----|----|----| En |
+ * | 0 |./FN| |
+ * `-------------------'
+ */
+
+ [_BL] = LAYOUT_numpad_6x4(
+ KC_ESC, KC_TAB, KC_BSPC, KC_PEQL,
+ KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+ KC_P7, KC_P8, KC_P9,
+ KC_P4, KC_P5, KC_P6, KC_PPLS,
+ KC_P1, KC_P2, KC_P3,
+ KC_P0, LT(_FL,KC_PDOT), KC_PENT
+ ),
+
+ /* Keymap _FL: Function Layer
+ * ,-------------------.
+ * |Esc |TAB |BS | = |
+ * |----|----|----|----|
+ * | NL | / | * | - |
+ * |----|----|----|----|
+ * | 7 | 8 | 9 | |
+ * |----|----|----|RST |
+ * | 4 | 5 | 6 | |
+ * |----|----|----|----|
+ * | 1 | 2 | 3 | |
+ * |----|----|----| En |
+ * | 0 |./FN| |
+ * `-------------------'
+ */
+ [_FL] = LAYOUT_numpad_6x4(
+ KC_ESC, KC_TAB, KC_BSPC, KC_PEQL,
+ KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+ KC_P7, KC_P8, KC_P9,
+ KC_P4, KC_P5, KC_P6, RESET,
+ KC_P1, KC_P2, KC_P3,
+ KC_P0, LT(_FL,KC_PDOT), KC_PENT
+ ),
+};
--- /dev/null
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BL 0
+#define _FL 1
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Keymap _BL: (Base Layer) Default Layer
+ * ,-------------------.
+ * |Esc |Setp| - | = |
+ * |----|----|----|----|
+ * | F1 | F2 | F3 | F4 |
+ * |----|----|----|----|
+ * | 7 | 8 | 9 | - |
+ * |----|----|----|----|
+ * | 4 | 5 | 6 | LF |
+ * |----|----|----|----|
+ * | 1 | 2 | 3 | \ |
+ * |----|----|----|----|
+ * |Left|Down| Up |Rght|
+ * `-------------------'
+ */
+
+ [_BL] = LAYOUT_ortho_6x4(
+ KC_ESC, KC_TAB, KC_MINS,KC_EQL,
+ KC_F1, KC_F2, KC_F3, KC_F4,
+ KC_P7, KC_P8, KC_P9, KC_PMNS,
+ KC_P4, KC_P5, KC_P6, KC_PENT,
+ KC_P1, KC_P2, KC_P3, KC_BSLS,
+ KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT
+ ),
+
+ /* Keymap _FL: Function Layer
+ * ,-------------------.
+ * |Esc |TAB |BS | = |
+ * |----|----|----|----|
+ * | NL | / | * | - |
+ * |----|----|----|----|
+ * | 7 | 8 | 9 | |
+ * |----|----|----|RST |
+ * | 4 | 5 | 6 | |
+ * |----|----|----|----|
+ * | 1 | 2 | 3 | |
+ * |----|----|----| En |
+ * | 0 |./FN| |
+ * `-------------------'
+ */
+ [_FL] = LAYOUT_ortho_6x4(
+ KC_ESC, KC_TAB, KC_BSPC, KC_PEQL,
+ KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+ KC_P7, KC_P8, KC_P9, RESET,
+ KC_P4, KC_P5, KC_P6, KC_PENT,
+ KC_P1, KC_P2, KC_P3, KC_PENT,
+ KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT
+ ),
+};
--- /dev/null
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BL 0
+#define _FL 1
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Keymap _BL: (Base Layer) Default Layer
+ * ,-------------------.
+ * | T | G | B |Spac|
+ * |----|----|----|----|
+ * | R | F | V | Fn |
+ * |----|----|----|----|
+ * | E | D | C | OS |
+ * |----|----|----|----|
+ * | W | S | X | Alt|
+ * |----|----|----|----|
+ * | Q | A | Z | Ctl|
+ * |----|----|----|----|
+ * | Esc| Tab|Shft| Fn2|
+ * `-------------------'
+ */
+
+ [_BL] = LAYOUT_ortho_6x4(
+ KC_T, KC_G, KC_B, KC_SPACE,
+ KC_R, KC_F, KC_V, MO(1),
+ KC_E, KC_D, KC_C, KC_LGUI,
+ KC_W, KC_S, KC_X, KC_LALT,
+ KC_Q, KC_A, KC_Z, KC_LCTL,
+ KC_TAB, KC_ESC, KC_LSHIFT, MO(1)
+ ),
+
+ /* Keymap _FL: Function Layer
+ * ,-------------------.
+ * | 5 | F5 | F11|Spac|
+ * |----|----|----|----|
+ * | 4 | F4 | F10| |
+ * |----|----|----|----|
+ * | 3 | F3 | F9 | OS |
+ * |----|----|----|----|
+ * | 2 | F2 | F8 | Alt|
+ * |----|----|----|----|
+ * | 1 | F1 | F7 | Ctl|
+ * |----|----|----|----|
+ * | ` | Del|Shft| |
+ * `-------------------'
+ */
+ [_FL] = LAYOUT_ortho_6x4(
+ KC_5, KC_F5, KC_F11, _______,
+ KC_4, KC_F4, KC_F10, _______,
+ KC_3, KC_F3, KC_F9, _______,
+ KC_2, KC_F2, KC_F8, _______,
+ KC_1, KC_F1, KC_F7, _______,
+ KC_GRV,KC_DEL, _______, _______
+ ),
+};
--- /dev/null
+#include QMK_KEYBOARD_H
+
+#ifdef RGBLIGHT_ENABLE
+#endif
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BL 0
+#define _FL 1
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Keymap _BL: (Base Layer) Default Layer
+ * ,-------------------.
+ * |Spac| N | H | Y |
+ * |----|----|----|----|
+ * | Fn | M | J | U |
+ * |----|----|----|----|
+ * |Left| , | K | I |
+ * |----|----|----|----|
+ * |Down| . | L | O |
+ * |----|----|----|----|
+ * | Up | / | ; | P |
+ * |----|----|----|----|
+ * |Rght| Ret| " |Bspc|
+ * `-------------------'
+ */
+ [_BL] = LAYOUT_ortho_6x4(
+ KC_SPACE, KC_N, KC_H, KC_Y,
+ MO(1), KC_M, KC_J, KC_U,
+ KC_LEFT, KC_COMM, KC_K, KC_I,
+ KC_DOWN, KC_DOT, KC_L, KC_O,
+ KC_UP, KC_SLASH, KC_SCLN, KC_P,
+ KC_RIGHT, KC_ENT, KC_QUOT, KC_BSPC
+ ),
+
+ /* Keymap _FL: Function Layer
+ * ,-------------------.
+ * |Esc | F12| F6 | 6 |
+ * |----|----|----|----|
+ * | NL | M | - | 7 |
+ * |----|----|----|----|
+ * |Left| , | = | 8 |
+ * |----|----|----|----|
+ * |Down| . | [ | 9 |
+ * |----|----|----|----|
+ * | Up | / | ] | 0 |
+ * |----|----|----|----|
+ * |Rght| Ret| \ | Del|
+ * `-------------------'
+ */
+ [_FL] = LAYOUT_ortho_6x4(
+ _______, KC_F12, KC_F6, KC_6,
+ _______, _______, KC_MINS, KC_7,
+ _______, _______, KC_EQL, KC_8,
+ _______, _______, KC_LBRC, KC_9,
+ _______, _______, KC_RBRC, KC_0,
+ _______, _______, KC_BSLS, KC_DEL
+ ),
+};
--- /dev/null
+Tritium Numpad
+===
+
+Keyboard Maintainer: QMK Community
+Hardware Supported: Handwired 6x4 numpads using promicro controller
+Hardware Availability: https://www.thingiverse.com/thing:2855938
+
+Wiring is accomplished on the Pro Micro board using the following pins as rows:
+* D2 : Row 1
+* D3 : Row 2
+* D4 : Row 3
+* D5 : Row 4
+* D6 : Row 5
+* D7 : Row 6
+
+and the following pins as columns:
+* A3 : Col 1
+* A1 : Col 2
+* D15 : Col 3
+* D16 : Col 4
+
+Make example for this keyboard (after setting up your build environment):
+
+ make tritium_numpad:default
+
+Bootmagic is enabled. Press the key at 0,0 (usually escape or numlock in the top left corner) while plugging the keyboard in to jump to bootloader.
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
--- /dev/null
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Bootloader
+# This definition is optional, and if your keyboard supports multiple bootloaders of
+# different sizes, comment this out, and the correct address will be loaded
+# automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = lite # Key at 0,0 makes the keyboard go into bootloader(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality (+1150)
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+
+LAYOUTS = numpad_6x4 ortho_6x4 nontra_6x4
--- /dev/null
+#include "tritium_numpad.h"
+#include "led.h"
+
+void keyboard_pre_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+ keyboard_pre_init_user();
+ led_init_ports();
+};
+
+void matrix_scan_kb(void) {
+ // put your looping keyboard code here
+ // runs every cycle (a lot)
+ matrix_scan_user();
+};
+
+void led_init_ports(void) {
+ // * Set our LED pins as output
+ // Numlock LED
+ setPinOutput(D5);
+}
+
+void led_set_kb(uint8_t usb_led) {
+ if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {
+ writePinLow(D5);
+ } else {
+ writePinHigh(D5);
+ }
+}
--- /dev/null
+#pragma once
+
+#include "quantum.h"
+
+// readability
+#define XXX KC_NO
+
+/* matrix layout
+ * ,-------------------.
+ * | 00 | 01 | 02 | 03 |
+ * |----|----|----|----|
+ * | 10 | 11 | 12 | 13 |
+ * |----|----|----|----|
+ * | 20 | 21 | 22 | |
+ * |----|----|----| 23 |
+ * | 30 | 31 | 32 | |
+ * |----|----|----|----|
+ * | 40 | 41 | 42 | |
+ * |----|----|----| 43 |
+ * | 50 | 52 | |
+ * `-------------------'
+ */
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+#define LAYOUT_numpad_6x4( \
+ k00, k01, k02, k03, \
+ k10, k11, k12, k13, \
+ k20, k21, k22, \
+ k30, k31, k32, k23, \
+ k40, k41, k42, \
+ k50, k52, k43 \
+) \
+{ \
+ {k00, k01, k02, k03}, \
+ {k10, k11, k12, k13}, \
+ {k20, k21, k22, k23}, \
+ {k30, k31, k32, XXX}, \
+ {k40, k41, k42, k43}, \
+ {k50, XXX, k52, XXX} \
+}
+
+/* matrix layout
+ * ,-------------------.
+ * | 00 | 01 | 02 | 03 |
+ * |----|----|----|----|
+ * | 10 | 11 | 12 | 13 |
+ * |----|----|----|----|
+ * | 20 | 21 | 22 | |
+ * |----|----|----| 23 |
+ * | 30 | 31 | 32 | |
+ * |----|----|----|----|
+ * | 40 | 41 | 42 | |
+ * |----|----|----| 43 |
+ * | 50 | 51 | 52 | |
+ * `-------------------'
+ */
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+#define LAYOUT_nontra_6x4( \
+ k00, k01, k02, k03, \
+ k10, k11, k12, k13, \
+ k20, k21, k22, \
+ k30, k31, k32, k23, \
+ k40, k41, k42, \
+ k50, k51, k52, k43 \
+) \
+{ \
+ {k00, k01, k02, k03}, \
+ {k10, k11, k12, k13}, \
+ {k20, k21, k22, k23}, \
+ {k30, k31, k32, xxx}, \
+ {k40, k41, k42, k43}, \
+ {k50, k51, k52, xxx} \
+}
+
+#define LAYOUT_ortho_6x4( \
+ k00, k01, k02, k03, \
+ k10, k11, k12, k13, \
+ k20, k21, k22, k23, \
+ k30, k31, k32, k33, \
+ k40, k41, k42, k43, \
+ k50, k51, k52, k53 \
+) \
+{ \
+ {k00, k01, k02, k03}, \
+ {k10, k11, k12, k13}, \
+ {k20, k21, k22, k23}, \
+ {k30, k31, k32, k33}, \
+ {k40, k41, k42, k43}, \
+ {k50, k51, k52, k53} \
+}
+
+void keyboard_pre_init_user(void);
+void matrix_scan_user(void);
+
projects / qmk_firmware.git / commitdiff