Guide, node Updating translation committishes..
@end ignore
-@c \version "2.19.22"
+@c \version "2.19.40"
@node Rhythms
@section Rhythms
@cindex note lengths
@funindex \longa
-@funindex longa
@funindex \breve
-@funindex breve
@funindex \maxima
-@funindex maxima
Durations are designated by numbers and dots. Durations are entered
as their reciprocal values. For example, a quarter note is entered
specified. Shorter values are possible, but only as beamed notes.
@c Two 64th notes are needed to obtain beams
-@lilypond[quote,verbatim,relative=2]
-\time 8/1
-c\longa c\breve c1 c2
-c4 c8 c16 c32 c64 c128 c128
+@lilypond[quote,verbatim]
+\relative {
+ \time 8/1
+ c''\longa c\breve c1 c2
+ c4 c8 c16 c32 c64 c128 c128
+}
@end lilypond
Here are the same durations with automatic beaming turned off.
@c not strictly "writing rhythms"; more of a "displaying" thing,
@c but it's ok here. -gp
-@lilypond[quote,verbatim,relative=2]
-\time 8/1
-\autoBeamOff
-c\longa c\breve c1 c2
-c4 c8 c16 c32 c64 c128 c128
+@lilypond[quote,verbatim]
+\relative {
+ \time 8/1
+ \autoBeamOff
+ c''\longa c\breve c1 c2
+ c4 c8 c16 c32 c64 c128 c128
+}
@end lilypond
A note with the duration of a quadruple breve may be entered with
entered duration. The default for the first note is a quarter
note.
-@lilypond[quote,verbatim,relative=2]
-a a a2 a a4 a a1 a
+@lilypond[quote,verbatim]
+\relative { a' a a2 a a4 a a1 a }
@end lilypond
Durations occuring on their own within a music sequence will take
their pitches from the preceding note or chord.
-@lilypond[quote,verbatim,relative=2]
-\time 8/1
-c \longa \breve 1 2
-4 8 16 32 64 128 128
+@lilypond[quote,verbatim]
+\relative {
+ \time 8/1
+ c'' \longa \breve 1 2
+ 4 8 16 32 64 128 128
+}
@end lilypond
@cindex notes, dotted
duration. Double-dotted notes are specified by appending two
dots, and so on.
-@lilypond[quote,verbatim,relative=2]
-a4 b c4. b8 a4. b4.. c8.
+@lilypond[quote,verbatim]
+\relative { a'4 b c4. b8 a4. b4.. c8. }
@end lilypond
Some durations cannot be represented with just binary durations
proportional notation, see @ref{Proportional notation}.
@funindex \dotsUp
-@funindex dotsUp
@funindex \dotsDown
-@funindex dotsDown
@funindex \dotsNeutral
-@funindex dotsNeutral
Dots are normally moved up to avoid staff lines, except in
polyphonic situations. Dots may be manually placed above or below
@c Deliberately duplicated in Durations and Rests. -gp
There is no fundamental limit to rest durations (both in terms of
longest and shortest), but the number of glyphs is limited:
-rests from 128th to maxima (8 x whole) may be printed.
+rests from 128th to maxima (8× whole) may be printed.
@node Tuplets
@cindex triplets
@funindex \tuplet
-@funindex tuplet
Tuplets are made from a music expression with the @code{\tuplet}
command, multiplying the speed of the music expression by a fraction:
optionally with a bracket. The most common tuplets are triplets
(3@tie{}notes sound within the duration normally allowed for@tie{}2).
-@lilypond[quote,verbatim,relative=2]
-a2 \tuplet 3/2 { b4 4 4 }
-c4 c \tuplet 3/2 { b4 a g }
+@lilypond[quote,verbatim]
+\relative {
+ a'2 \tuplet 3/2 { b4 4 4 }
+ c4 c \tuplet 3/2 { b4 a g }
+}
@end lilypond
@cindex tuplet grouping
to specify the duration of one tuplet group directly before the music
in order to have the tuplets grouped automatically:
-@lilypond[quote,verbatim,relative=2]
-g2 r8 \tuplet 3/2 8 { cis16 d e e f g g f e }
+@lilypond[quote,verbatim]
+\relative {
+ g'2 r8 \tuplet 3/2 8 { cis16 d e e f g g f e }
+}
@end lilypond
@cindex tuplet bracket placement
@funindex \tupletUp
-@funindex tupletUp
@funindex \tupletDown
-@funindex tupletDown
@funindex \tupletNeutral
-@funindex tupletNeutral
Tuplet brackets may be manually placed above or below the staff:
-@lilypond[quote,verbatim,relative=2]
-\tupletUp \tuplet 3/2 { c8 d e }
-\tupletNeutral \tuplet 3/2 { c8 d e }
-\tupletDown \tuplet 3/2 { f,8 g a }
-\tupletNeutral \tuplet 3/2 { f8 g a }
+@lilypond[quote,verbatim]
+\relative {
+ \tupletUp \tuplet 3/2 { c''8 d e }
+ \tupletNeutral \tuplet 3/2 { c8 d e }
+ \tupletDown \tuplet 3/2 { f,8 g a }
+ \tupletNeutral \tuplet 3/2 { f8 g a }
+}
@end lilypond
Tuplets may be nested:
-@lilypond[quote,verbatim,relative=2]
-\autoBeamOff
-c4 \tuplet 5/4 { f8 e f \tuplet 3/2 { e[ f g] } } f4
+@lilypond[quote,verbatim]
+\relative {
+ \autoBeamOff
+ c''4 \tuplet 5/4 { f8 e f \tuplet 3/2 { e[ f g] } } f4
+}
@end lilypond
Modifying nested tuplets which begin at the same musical moment must be
In the following example, the first three notes take up exactly
two beats, but no triplet bracket is printed.
-@lilypond[quote,relative=2,verbatim]
-\time 2/4
-% Alter durations to triplets
-a4*2/3 gis a
-% Normal durations
-a4 a
-% Double the duration of chord
-<a d>4*2
-% Duration of quarter, appears like sixteenth
-b16*4 c4
+@lilypond[quote,verbatim]
+\relative {
+ \time 2/4
+ % Alter durations to triplets
+ a'4*2/3 gis a
+ % Normal durations
+ a4 a
+ % Double the duration of chord
+ <a d>4*2
+ % Duration of quarter, appears like sixteenth
+ b16*4 c4
+}
@end lilypond
The duration of spacer rests may also be modified by
@cindex expanding music
@funindex \scaleDurations
-@funindex scaleDurations
Longer stretches of music may be compressed by a fraction in the
same way, as if every note, chord or rest had the fraction as a
fraction @emph{num}/@emph{den}. Here is an example showing how music
can be compressed and expanded:
-@lilypond[quote,relative=2,verbatim]
-\time 2/4
-% Normal durations
-<c a>4 c8 a
-% Scale music by *2/3
-\scaleDurations 2/3 {
- <c a f>4. c8 a f
-}
-% Scale music by *2
-\scaleDurations 2/1 {
- <c' a>4 c8 b
+@lilypond[quote,verbatim]
+\relative {
+ \time 2/4
+ % Normal durations
+ <c'' a>4 c8 a
+ % Scale music by *2/3
+ \scaleDurations 2/3 {
+ <c a f>4. c8 a f
+ }
+ % Scale music by *2
+ \scaleDurations 2/1 {
+ <c' a>4 c8 b
+ }
}
@end lilypond
of each pair of notes being tied. This indicates that the note
should be tied to the following note, which must be at the same pitch.
-@lilypond[quote,verbatim,relative=2]
-a2~ 4~ 16 r r8
+@lilypond[quote,verbatim]
+{ a'2~ 4~ 16 r r8 }
@end lilypond
Ties can make use of the @q{last explicit pitch} interpretation of
isolated durations:
-@lilypond[quote,verbatim,relative=2]
-a2~ 4~ 16 r r8
+@lilypond[quote,verbatim]
+{ a'2~ 4~ 16 r r8 }
@end lilypond
Ties are used either when the note crosses a bar line, or when
@lilypond[verbatim,quote]
\relative {
- r8 c'~ 2 r4 |
+ r8 c'4.~ 4 r4 |
r8^"not" c2~ 8 r4
}
@end lilypond
created. Chords may be partially tied by placing the ties inside
the chord.
-@lilypond[quote,verbatim,relative=1]
-<c e g>2 ~ 2
-<c e g>4~ <c e g c>
-<c~ e g~ b> <c e g b>
+@lilypond[quote,verbatim]
+\relative c' {
+ <c e g>2~ 2 |
+ <c e g>4~ <c e g c>
+ <c~ e g~ b> <c e g b> |
+}
@end lilypond
@cindex repeating ties
@cindex ties and volta brackets
@funindex \repeatTie
-@funindex repeatTie
When a second alternative of a repeat starts with a tied note, you
have to specify the repeated tie as follows:
-@lilypond[quote,relative=2,verbatim]
-\repeat volta 2 { c g <c e>2~ }
-\alternative {
- % First alternative: following note is tied normally
- { <c e>2. r4 }
- % Second alternative: following note has a repeated tie
- { <c e>2\repeatTie d4 c } }
+@lilypond[quote,verbatim]
+\relative {
+ \repeat volta 2 { c'' g <c e>2~ }
+ \alternative {
+ % First alternative: following note is tied normally
+ { <c e>2. r4 }
+ % Second alternative: following note has a repeated tie
+ { <c e>2\repeatTie d4 c }
+ }
+}
@end lilypond
@cindex laissez vibrer
@cindex ties, laissez vibrer
@funindex \laissezVibrer
-@funindex laissezVibrer
@notation{L.v.}@: ties (@notation{laissez vibrer}) indicate that
notes must not be damped at the end. It is used in notation for
piano, harp and other string and percussion instruments. They can
be entered as follows:
-@lilypond[quote,verbatim,relative=1]
-<c f g>1\laissezVibrer
+@lilypond[quote,verbatim,fragment]
+<c' f' g'>1\laissezVibrer
@end lilypond
@cindex ties, placement
@funindex \tieUp
-@funindex tieUp
@funindex \tieDown
-@funindex tieDown
@funindex \tieNeutral
-@funindex tieNeutral
Ties may be made to curve up or down manually; see
@ref{Direction and placement}.
@cindex dotted ties
@funindex \tieDotted
-@funindex tieDotted
@funindex \tieDashed
-@funindex tieDashed
@funindex \tieSolid
-@funindex tieSolid
Ties may be made dashed, dotted, or a combination of solid and
dashed.
-@lilypond[quote, verbatim, relative=1]
-\tieDotted
-c2~ 2
-\tieDashed
-c2~ 2
-\tieHalfDashed
-c2~ 2
-\tieHalfSolid
-c2~ 2
-\tieSolid
-c2~ 2
+@lilypond[quote, verbatim]
+\relative c' {
+ \tieDotted
+ c2~ 2
+ \tieDashed
+ c2~ 2
+ \tieHalfDashed
+ c2~ 2
+ \tieHalfSolid
+ c2~ 2
+ \tieSolid
+ c2~ 2
+}
@end lilypond
Custom dash patterns can be specified:
-@lilypond[quote, verbatim, relative=1]
-\tieDashPattern #0.3 #0.75
-c2~ 2
-\tieDashPattern #0.7 #1.5
-c2~ 2
-\tieSolid
-c2~ 2
+@lilypond[quote, verbatim]
+\relative c' {
+ \tieDashPattern #0.3 #0.75
+ c2~ 2
+ \tieDashPattern #0.7 #1.5
+ c2~ 2
+ \tieSolid
+ c2~ 2
+}
@end lilypond
Dash pattern definitions for ties have the same structure as dash
pattern definitions for slurs. For more information about complex dash
patterns, see @ref{Slurs}.
-Override @var{whiteout} and @var{layer} layout properties for ties that
-collide with other objects in a staff.
+Override @var{whiteout} and @var{layer} layout properties of objects
+that should cause a gap in ties.
-@lilypond[verbatim,quote,ragged-right,relative=2]
-\override Tie.layer = #-2
-\override Staff.TimeSignature.layer = #-1
-\override Staff.KeySignature.layer = #-1
-\override Staff.TimeSignature.whiteout-box = ##t
-\override Staff.KeySignature.whiteout-box = ##t
-b2 b~
-\time 3/4
-\key a \major
-b r4
+@lilypond[verbatim,quote,ragged-right]
+\relative {
+ \override Tie.layer = #-2
+ \override Staff.TimeSignature.layer = #-1
+ \override Staff.KeySignature.layer = #-1
+ \override Staff.TimeSignature.whiteout = ##t
+ \override Staff.KeySignature.whiteout = ##t
+ b'2 b~
+ \time 3/4
+ \key a \major
+ b r4
+}
@end lilypond
@predefined
@cindex breve rest
@funindex \rest
-@funindex rest
@funindex r
@funindex \maxima
-@funindex maxima
@funindex \longa
-@funindex longa
@funindex \breve
-@funindex breve
Rests are entered like notes with the note name @code{r}.
Durations longer than a whole rest use the following predefined
@c \time 16/1 is used to avoid spurious bar lines
@c and long tracts of empty measures
-@lilypond[quote,verbatim,relative=2]
+@lilypond[quote,verbatim]
\new Staff {
% These two lines are just to prettify this example
\time 16/1
allows for precise manual formatting of polyphonic music, since the
automatic rest collision formatter will not move these rests.
-@lilypond[quote,verbatim,relative=2]
-a4\rest d4\rest
+@lilypond[quote,verbatim]
+\relative { a'4\rest d4\rest }
@end lilypond
@snippets
@c Deliberately duplicated in Durations and Rests. -gp
There is no fundamental limit to rest durations (both in terms of
longest and shortest), but the number of glyphs is limited: there
-are rests from 128th to maxima (8 x whole).
+are rests from 128th to maxima (8× whole).
@node Invisible rests
@funindex s
@funindex \skip
-@funindex skip
An invisible rest (also called a @q{spacer rest}) can be entered
like a note with the note name@tie{}@code{s}:
-@lilypond[verbatim,quote,relative=2]
-c4 c s c
-s2 c
+@lilypond[verbatim,quote]
+\relative c'' {
+ c4 c s c |
+ s2 c |
+}
@end lilypond
@cindex lyrics, skip
the lyrics derive their durations from the notes in an associated
melody through @code{\addlyrics} or @code{\lyricsto}.
-@lilypond[quote,verbatim,relative=2]
+@lilypond[quote,verbatim]
<<
{
- a2 \skip2 a2 a2
+ a'2 \skip2 a'2 a'2
}
\new Lyrics {
\lyricmode {
Because @code{\skip} is a command, it does not affect the default
durations of following notes, unlike@tie{}@code{s}.
-@lilypond[quote,verbatim,relative=2]
+@lilypond[quote,verbatim]
<<
{
- \repeat unfold 8 { a4 }
+ \repeat unfold 8 { a'4 }
}
{
- a4 \skip 2 a |
- s2 a
+ a'4 \skip 2 a' |
+ s2 a'
}
>>
@end lilypond
contexts to be created if none exist, just like notes and rests
do:
-@lilypond[quote,verbatim,relative=2]
-s1 s s
+@lilypond[quote,verbatim]
+{ s1 s s }
@end lilypond
@code{\skip} simply skips musical time; it creates no output of
any kind.
-@lilypond[quote,verbatim,relative=2]
+@lilypond[quote,verbatim]
% This is valid input, but does nothing
-\skip 1 \skip1 \skip 1
+{ \skip 1 \skip1 \skip 1 }
@end lilypond
@seealso
@cindex whole rest for a full measure
@cindex rest, whole for a full measure
-@funindex compressMMRests
@funindex \compressMMRests
@funindex R
Rests for one or more full measures are entered like notes with
the note name uppercase @code{R}:
-@lilypond[quote,verbatim,relative=2]
+@lilypond[quote,verbatim]
% Rest measures contracted to single measure
\compressMMRests {
R1*4
R1*24
R1*4
- b2^"Tutti" b4 a4
+ b'2^"Tutti" b'4 a'4
}
@end lilypond
always be an integral number of measure-lengths, so augmentation dots
or fractions must often be used:
-@lilypond[quote,verbatim,relative=2]
+@lilypond[quote,verbatim]
\compressMMRests {
\time 2/4
R1 | R2 |
A full-measure rest is printed as either a whole or breve rest,
centered in the measure, depending on the time signature.
-@lilypond[quote,verbatim,relative=2]
+@lilypond[quote,verbatim,fragment]
\time 4/4
R1 |
\time 6/4
rest can be shown as a single measure containing a multi-measure rest
symbol, with the number of measures of rest printed above the measure:
-@lilypond[quote,verbatim,relative=2]
+@lilypond[quote,verbatim,fragment]
% Default behavior
\time 3/4 r2. | R2.*2 |
\time 2/4 R2 |
@cindex multi-measure rest with markup
@funindex \fermataMarkup
-@funindex fermataMarkup
@funindex MultiMeasureRestText
Markups can be added to multi-measure rests.
The predefined command @code{\fermataMarkup}
is provided for adding fermatas.
-@lilypond[quote,verbatim,relative=2]
+@lilypond[quote,verbatim]
\compressMMRests {
\time 3/4
R2.*10^\markup { \italic "ad lib." }
be directed to the correct object, or they will be ignored. See the
following example:}
-@lilypond[quote,verbatim,relative=2]
+@lilypond[quote,verbatim,fragment]
% This fails, as the wrong object name is specified
\override TextScript.padding = #5
R1^"wrong"
@funindex \textLengthOn
-@funindex textLengthOn
@funindex \textLengthOff
-@funindex textLengthOff
@funindex \fermataMarkup
-@funindex fermataMarkup
@funindex \compressMMRests
-@funindex compressMMRests
@predefined
@code{\textLengthOn},
@cindex multi-measure rests and fingerings
@knownissues
-Fingerings over multi-measure rests (e.g. @code{R1*10-4}) may result
+Fingerings over multi-measure rests (e.g., @code{R1*10-4}) may result
in the fingering numeral colliding with the bar counter
numeral.
@cindex meter
@funindex \time
-@funindex time
The time signature is set as follows:
-@lilypond[quote,verbatim,relative=2]
-\time 2/4 c2
-\time 3/4 c2.
+@lilypond[quote,verbatim,fragment]
+\time 2/4 c''2
+\time 3/4 c''2.
@end lilypond
Mid-measure time signature changes are covered in @ref{Upbeats}.
there. This default behavior may be changed, see
@ref{Visibility of objects}.
-@lilypond[quote,verbatim,relative=2]
-\time 2/4
-c2 c
-\break
-c c
-\break
-\time 4/4
-c c c c
+@lilypond[quote,verbatim]
+\relative c'' {
+ \time 2/4
+ c2 c
+ \break
+ c c
+ \break
+ \time 4/4
+ c c c c
+}
@end lilypond
@cindex time signature style
@cindex meter style
@funindex \numericTimeSignature
-@funindex numericTimeSignature
@funindex \defaultTimeSignature
-@funindex defaultTimeSignature
The time signature symbol that is used in 2/2 and 4/4 time can be
changed to a numeric style:
-@lilypond[quote,verbatim,relative=2]
-% Default style
-\time 4/4 c1
-\time 2/2 c1
-% Change to numeric style
-\numericTimeSignature
-\time 4/4 c1
-\time 2/2 c1
-% Revert to default style
-\defaultTimeSignature
-\time 4/4 c1
-\time 2/2 c1
+@lilypond[quote,verbatim]
+\relative c'' {
+ % Default style
+ \time 4/4 c1
+ \time 2/2 c1
+ % Change to numeric style
+ \numericTimeSignature
+ \time 4/4 c1
+ \time 2/2 c1
+ % Revert to default style
+ \defaultTimeSignature
+ \time 4/4 c1
+ \time 2/2 c1
+}
@end lilypond
\score {
\new Staff {
\relative {
- \time #'(2 2 3) 7/8
+ \time 2,2,3 7/8
\repeat unfold 7 { c'8 } |
- \time #'(3 2 2) 7/8
+ \time 3,2,2 7/8
\repeat unfold 7 { c8 } |
}
}
\overrideTimeSignatureSettings
4/4 % timeSignatureFraction
1/4 % baseMomentFraction
- #'(3 1) % beatStructure
+ 3,1 % beatStructure
#'() % beamExceptions
\time 4/4
\repeat unfold 8 { c8 } |
\overrideTimeSignatureSettings
4/4 % timeSignatureFraction
1/4 % baseMomentFraction
- #'(3 1) % beatStructure
+ 3,1 % beatStructure
#'() % beamExceptions
\time 4/4
\repeat unfold 8 { c8 } |
\overrideTimeSignatureSettings
4/4 % timeSignatureFraction
1/4 % baseMomentFraction
- #'(3 1) % beatStructure
+ 3,1 % beatStructure
#'() % beamExceptions
\time 4/4
\repeat unfold 8 {c''8}
\overrideTimeSignatureSettings
4/4 % timeSignatureFraction
1/4 % baseMomentFraction
- #'(1 3) % beatStructure
+ 1,3 % beatStructure
#'() % beamExceptions
\time 4/4
\repeat unfold 8 {c''8}
@cindex metronome marking with text
@funindex \tempo
-@funindex tempo
A basic metronome mark is simple to write:
-@lilypond[verbatim,quote,relative=1]
-\tempo 4 = 120
-c2 d
-e4. d8 c2
+@lilypond[verbatim,quote]
+\relative {
+ \tempo 4 = 120
+ c'2 d
+ e4. d8 c2
+}
@end lilypond
Metronome marks may also be printed as a range of two numbers:
-@lilypond[verbatim,quote,relative=1]
-\tempo 4 = 40 - 46
-c4. e8 a4 g
-b,2 d4 r
+@lilypond[verbatim,quote]
+\relative {
+ \tempo 4 = 40 - 46
+ c'4. e8 a4 g
+ b,2 d4 r
+}
@end lilypond
Tempo indications with text can be used instead:
-@lilypond[verbatim,quote,relative=2]
-\tempo "Allegretto"
-c4 e d c
-b4. a16 b c4 r4
+@lilypond[verbatim,quote]
+\relative {
+ \tempo "Allegretto"
+ c''4 e d c
+ b4. a16 b c4 r4
+}
@end lilypond
Combining a metronome mark and text will automatically place the
metronome mark within parentheses:
-@lilypond[verbatim,quote,relative=2]
-\tempo "Allegro" 4 = 160
-g4 c d e
-d4 b g2
+@lilypond[verbatim,quote]
+\relative {
+ \tempo "Allegro" 4 = 160
+ g'4 c d e
+ d4 b g2
+}
@end lilypond
In general, the text can be any markup object:
-@lilypond[verbatim,quote,relative=2]
-\tempo \markup { \italic Faster } 4 = 132
-a8-. r8 b-. r gis-. r a-. r
+@lilypond[verbatim,quote]
+\relative {
+ \tempo \markup { \italic Faster } 4 = 132
+ a'8-. r8 b-. r gis-. r a-. r
+}
@end lilypond
A parenthesized metronome mark with no textual indication may be
written by including an empty string in the input:
-@lilypond[verbatim,quote,relative=2]
-\tempo "" 8 = 96
-d4 g e c
+@lilypond[verbatim,quote]
+\relative {
+ \tempo "" 8 = 96
+ d''4 g e c
+}
@end lilypond
@funindex \markLengthOn
-@funindex markLengthOn
@funindex \markLengthOff
-@funindex markLengthOff
In a part for an instrument with long periods of rests,
tempo indications sometimes follow each other closely.
restores the default behavior of ignoring tempo marks
for horizontal spacing.
-@lilypond[verbatim,quote,relative=0]
+@lilypond[verbatim,quote]
\compressMMRests {
\markLengthOn
\tempo "Molto vivace"
@funindex measurePosition
@funindex \partial
-@funindex partial
Partial or pick-up measures, such as an @emph{anacrusis} or an
@emph{upbeat}, are entered using the @code{\partial} command:
@code{@var{duration}} is the length of the music preceding the
first bar.
-@lilypond[quote,verbatim,relative=1]
-\time 3/4
-\partial 4.
-r4 e8 | a4 c8 b c4 |
+@lilypond[quote,verbatim]
+\relative {
+ \time 3/4
+ \partial 4.
+ r4 e'8 | a4 c8 b c4 |
+}
@end lilypond
When @code{\partial} is used after the beginning of a score,
@code{@var{duration}} is the @emph{remaining} length of the
current measure. It does not create a new numbered bar.
-@lilypond[quote,verbatim,relative=1]
-\set Score.barNumberVisibility = #all-bar-numbers-visible
-\override Score.BarNumber.break-visibility =
- #end-of-line-invisible
-\time 9/8
-d'4.~ 4 d8 d( c) b | c4.~ 4. \bar "||"
-\time 12/8
-\partial 4.
-c8( d) e | f2.~ 4 f8 a,( c) f |
+@lilypond[quote,verbatim]
+\relative {
+ \set Score.barNumberVisibility = #all-bar-numbers-visible
+ \override Score.BarNumber.break-visibility =
+ #end-of-line-invisible
+ \time 9/8
+ d''4.~ 4 d8 d( c) b | c4.~ 4. \bar "||"
+ \time 12/8
+ \partial 4.
+ c8( d) e | f2.~ 4 f8 a,( c) f |
+}
@end lilypond
The @code{\partial} command is @emph{required} when the time
signature changes in mid measure, but it may also be used alone.
-@lilypond[quote,verbatim,relative=1]
-\set Score.barNumberVisibility = #all-bar-numbers-visible
-\override Score.BarNumber.break-visibility =
- #end-of-line-invisible
-\time 6/8
-\partial 8
-e8 | a4 c8 b[ c b] |
-\partial 4
-r8 e,8 | a4 \bar "||"
-\partial 4
-r8 e8 | a4
-c8 b[ c b] |
+@lilypond[quote,verbatim]
+\relative {
+ \set Score.barNumberVisibility = #all-bar-numbers-visible
+ \override Score.BarNumber.break-visibility =
+ #end-of-line-invisible
+ \time 6/8
+ \partial 8
+ e'8 | a4 c8 b[ c b] |
+ \partial 4
+ r8 e,8 | a4 \bar "||"
+ \partial 4
+ r8 e8 | a4
+ c8 b[ c b] |
+}
@end lilypond
The @code{\partial} command sets the @code{Timing.measurePosition}
@cindex beams, unmetered music
@funindex \cadenzaOn
-@funindex cadenzaOn
@funindex \cadenzaOff
-@funindex cadenzaOff
In metered music bar lines are inserted and bar numbers are calculated
-automatically. In unmetered music (i.e. cadenzas), this is not
+automatically. In unmetered music (i.e., cadenzas), this is not
desirable and can be @q{switched off} using the command
@code{\cadenzaOn}, then @q{switched back on} at the appropriate place
using @code{\cadenzaOff}.
-@lilypond[verbatim,relative=2,quote]
-c4 d e d
-\cadenzaOn
-c4 c d8[ d d] f4 g4.
-\cadenzaOff
-\bar "|"
-d4 e d c
+@lilypond[verbatim,quote]
+\relative c'' {
+ c4 d e d
+ \cadenzaOn
+ c4 c d8[ d d] f4 g4.
+ \cadenzaOff
+ \bar "|"
+ d4 e d c
+}
@end lilypond
Bar numbering is resumed at the end of the cadenza.
-@lilypond[verbatim,relative=2,quote]
-% Show all bar numbers
-\override Score.BarNumber.break-visibility = #all-visible
-c4 d e d
-\cadenzaOn
-c4 c d8[ d d] f4 g4.
-\cadenzaOff
-\bar "|"
-d4 e d c
+@lilypond[verbatim,quote]
+\relative c'' {
+ % Show all bar numbers
+ \override Score.BarNumber.break-visibility = #all-visible
+ c4 d e d
+ \cadenzaOn
+ c4 c d8[ d d] f4 g4.
+ \cadenzaOff
+ \bar "|"
+ d4 e d c
+}
@end lilypond
Inserting a @code{\bar} command within a cadenza does not start a new
reminder accidentals need to be inserted manually, see
@ref{Accidentals}.
-@lilypond[verbatim,relative=2,quote]
-c4 d e d
-\cadenzaOn
-cis4 d cis d
-\bar "|"
-% First cis is printed without alteration even if it's after a \bar
-cis4 d cis! d
-\cadenzaOff
-\bar "|"
+@lilypond[verbatim,quote]
+\relative c'' {
+ c4 d e d
+ \cadenzaOn
+ cis4 d cis d
+ \bar "|"
+ % First cis is printed without alteration even if it's after a \bar
+ cis4 d cis! d
+ \cadenzaOff
+ \bar "|"
+}
@end lilypond
Automatic beaming is disabled by @code{\cadenzaOn}. Therefore, all
beaming in cadenzas must be entered manually. See @ref{Manual beams}.
-@lilypond[verbatim,relative=2,quote]
-\repeat unfold 8 { c8 }
-\cadenzaOn
-cis8 c c c c
-\bar"|"
-c8 c c
-\cadenzaOff
-\repeat unfold 8 { c8 }
+@lilypond[verbatim,quote]
+\relative {
+ \repeat unfold 8 { c''8 }
+ \cadenzaOn
+ cis8 c c c c
+ \bar"|"
+ c8 c c
+ \cadenzaOff
+ \repeat unfold 8 { c8 }
+}
@end lilypond
These predefined commands affect all staves in the score, even when
@funindex timeSignatureFraction
@funindex \scaleDurations
-@funindex scaleDurations
@funindex \tuplet
-@funindex tuplet
Polymetric notation is supported explicitly or by manually modifying the
visible time signature symbol and/or scaling note durations.
for this is:
@example
-\compoundMeter #'@code{(list of lists)}
+\compoundMeter #'(list of lists)
@end example
The simplest construction is a single list, where the @emph{last} number
following example, notes and rests crossing the bar lines are split,
notes are also tied.
-@lilypond[quote,verbatim,relative=1]
+@lilypond[quote,verbatim]
\new Voice \with {
\remove "Note_heads_engraver"
\consists "Completion_heads_engraver"
\remove "Rest_engraver"
\consists "Completion_rest_engraver"
}
-
-{ c2. c8 d4 e f g a b c8 c2 b4 a g16 f4 e d c8. c2 r1*2 }
+\relative {
+ c'2. c8 d4 e f g a b c8 c2 b4 a g16 f4 e d c8. c2 r1*2
+}
@end lilypond
These engravers split all running notes and rests at the bar line, and
The property @code{completionUnit} sets a preferred duration for
the split notes.
-@lilypond[quote,verbatim,relative=2]
+@lilypond[quote,verbatim]
\new Voice \with {
\remove "Note_heads_engraver"
\consists "Completion_heads_engraver"
-} {
- \time 9/8 g\breve. d4. \bar "||"
+} \relative {
+ \time 9/8 g\breve. d''4. \bar "||"
\set completionUnit = #(ly:make-moment 3 8)
g\breve. d4.
}
These engravers split notes with scaled duration, such as those in tuplets,
into notes with the same scale-factor as in the input note.
-@lilypond[quote,verbatim,relative=2]
+@lilypond[quote,verbatim]
\new Voice \with {
\remove "Note_heads_engraver"
\consists "Completion_heads_engraver"
-} {
+} \relative {
\time 2/4 r4
- \tuplet 3/2 {g4 a b}
+ \tuplet 3/2 {g'4 a b}
\scaleDurations 2/3 {g a b}
g4*2/3 a b
\tuplet 3/2 {g4 a b}
duration longer than a measure, such as @code{c1*2}, are split into
notes without any scale factor, @code{@{ c1 c1 @}}. The property
@code{completionFactor} controls this behavior, and setting it to
-@code{#f} cause split notes and rest to have the scale factor
+@code{#f} cause split notes and rests to have the scale factor
of the input durations.
can be done with the rhythmic staff. All pitches of notes on such a
staff are squashed, and the staff itself has a single line
-@lilypond[quote,relative=1,verbatim]
+@lilypond[quote,verbatim]
<<
\new RhythmicStaff {
- \new Voice = "myRhythm" {
+ \new Voice = "myRhythm" \relative {
\time 4/4
- c4 e8 f g2
+ c'4 e8 f g2
r4 g g f
g1
}
@funindex Pitch_squash_engraver
@funindex \improvisationOn
-@funindex improvisationOn
@funindex \improvisationOff
-@funindex improvisationOff
Guitar chord charts often show the strumming rhythms. This can
be done with the @code{Pitch_squash_engraver} and
>>
@end lilypond
+Music containing chords can also be used as input to @code{RhythmicStaff}
+and for use with the @code{Pitch_squash_engraver} if the chords are first
+reduced to single notes with the @code{\reduceChords} music function:
+
+@lilypond[quote,verbatim]
+\new RhythmicStaff {
+ \time 4/4
+ \reduceChords {
+ <c>2
+ <e>2
+ <c e g>2
+ <c e g>4
+ <c e g>4
+ }
+}
+@end lilypond
@predefined
@code{\improvisationOn},
@cindex beams, customizing rules
@funindex \autoBeamOn
-@funindex autoBeamOn
@funindex \autoBeamOff
-@funindex autoBeamOff
-@lilypond[quote,verbatim,relative=2]
-\time 2/4 c8 c c c
-\time 6/8 c8 c c c8. c16 c8
+@lilypond[quote,verbatim]
+\relative c'' {
+ \time 2/4 c8 c c c
+ \time 6/8 c8 c c c8. c16 c8
+}
@end lilypond
If these automatic decisions are not satisfactory, beaming can be
If automatic beaming is not required, it may be turned off with
@code{\autoBeamOff} and on with @code{\autoBeamOn}:
-@lilypond[quote,relative=1,verbatim]
-c4 c8 c8. c16 c8. c16 c8
-\autoBeamOff
-c4 c8 c8. c16 c8.
-\autoBeamOn
-c16 c8
+@lilypond[quote,verbatim]
+\relative c' {
+ c4 c8 c8. c16 c8. c16 c8
+ \autoBeamOff
+ c4 c8 c8. c16 c8.
+ \autoBeamOn
+ c16 c8
+}
@end lilypond
@cindex melismata, with beams
@funindex autoBeaming
@funindex baseMoment
-@funindex beamExceptions
@funindex \beamExceptions
@funindex beatStructure
@funindex measureLength
@funindex \time
-@funindex time
@funindex \set
-@funindex set
When automatic beaming is enabled, the placement of automatic beams
is determined by three context properties:
time signature are retained and reinstated whenever that time signature
is re-established.
-@lilypond[quote,relative=2,verbatim]
-\time 5/16
-c16^"default" c c c c |
-% beamExceptions are unlikely to be defined for 5/16 time,
-% but let's disable them anyway to be sure
-\set Timing.beamExceptions = #'()
-\set Timing.beatStructure = #'(2 3)
-c16^"(2+3)" c c c c |
-\set Timing.beatStructure = #'(3 2)
-c16^"(3+2)" c c c c |
+@lilypond[quote,verbatim]
+\relative c'' {
+ \time 5/16
+ c16^"default" c c c c |
+ % beamExceptions are unlikely to be defined for 5/16 time,
+ % but let's disable them anyway to be sure
+ \set Timing.beamExceptions = #'()
+ \set Timing.beatStructure = 2,3
+ c16^"(2+3)" c c c c |
+ \set Timing.beatStructure = 3,2
+ c16^"(3+2)" c c c c |
+}
@end lilypond
-@lilypond[quote,relative=2,verbatim]
-\time 4/4
-a8^"default" a a a a a a a
-% Disable beamExceptions because they are definitely
-% defined for 4/4 time
-\set Timing.beamExceptions = #'()
-\set Timing.baseMoment = #(ly:make-moment 1/4)
-\set Timing.beatStructure = #'(1 1 1 1)
-a8^"changed" a a a a a a a
+@lilypond[quote,verbatim]
+\relative {
+ \time 4/4
+ a'8^"default" a a a a a a a
+ % Disable beamExceptions because they are definitely
+ % defined for 4/4 time
+ \set Timing.beamExceptions = #'()
+ \set Timing.baseMoment = #(ly:make-moment 1/4)
+ \set Timing.beatStructure = 1,1,1,1
+ a8^"changed" a a a a a a a
+}
@end lilypond
Beam setting changes can be limited to specific contexts. If no
setting is included in a lower-level context, the setting of the
enclosing context will apply.
-@lilypond[quote, verbatim,relative=1]
+@lilypond[quote, verbatim]
\new Staff {
\time 7/8
% No need to disable beamExceptions
% as they are not defined for 7/8 time
- \set Staff.beatStructure = #'(2 3 2)
+ \set Staff.beatStructure = 2,3,2
<<
\new Voice = one {
\relative {
\new Voice = two {
\relative {
\voiceTwo
- \set Voice.beatStructure = #'(1 3 3)
+ \set Voice.beatStructure = 1,3,3
f'8 f f f f f f
}
}
specified if the beaming is to be applied to all voices in the
staff:
-@lilypond[quote,verbatim,relative=2]
+@lilypond[quote,verbatim,fragment]
\time 7/8
% rhythm 3-1-1-2
% Change applied to Voice by default -- does not work correctly
% Because of autogenerated voices, all beating will
% be at baseMoment (1 . 8)
-\set beatStructure = #'(3 1 1 2)
-<< {a8 a a a16 a a a a8 a} \\ {f4. f8 f f f} >>
+\set beatStructure = 3,1,1,2
+<< \relative {a'8 a a a16 a a a a8 a} \\ \relative {f'4. f8 f f f} >>
% Works correctly with context Staff specified
-\set Staff.beatStructure = #'(3 1 1 2)
-<< {a8 a a a16 a a a a8 a} \\ {f4. f8 f f f} >>
+\set Staff.beatStructure = 3,1,1,2
+<< \relative {a'8 a a a16 a a a a8 a} \\ \relative {f'4. f8 f f f} >>
@end lilypond
The value of @code{baseMoment} can be adjusted to change
the value of @code{beatStructure} must be set to be
compatible with the new value of @code{baseMoment}.
-@lilypond[quote,verbatim,relative=2]
+@lilypond[quote,verbatim,fragment]
\time 5/8
% No need to disable beamExceptions
% as they are not defined for 5/8 time
\set Timing.baseMoment = #(ly:make-moment 1/16)
-\set Timing.beatStructure = #'(7 3)
-\repeat unfold 10 { a16 }
+\set Timing.beatStructure = 7,3
+\repeat unfold 10 { a'16 }
@end lilypond
@code{baseMoment} is a @i{moment}; a unit of musical duration. A
function has no other way to discern the measure length). Here is
a simple example:
-@lilypond[quote,relative=2,verbatim]
-\time 3/16
-\set Timing.beatStructure = #'(2 1)
-\set Timing.beamExceptions =
- \beamExceptions { 32[ 32] 32[ 32] 32[ 32] }
-c16 c c |
-\repeat unfold 6 { c32 } |
+@lilypond[quote,verbatim]
+\relative c'' {
+ \time 3/16
+ \set Timing.beatStructure = 2,1
+ \set Timing.beamExceptions =
+ \beamExceptions { 32[ 32] 32[ 32] 32[ 32] }
+ c16 c c |
+ \repeat unfold 6 { c32 } |
+}
@end lilypond
@warning{A @code{beamExceptions} value must be @emph{complete}
will reset the automatic beaming settings for the @code{Timing}
context to the default behavior.
-@lilypond[quote,verbatim,relative=2]
-\time 6/8
-\repeat unfold 6 { a8 }
-% group (4 + 2)
-\set Timing.beatStructure = #'(4 2)
-\repeat unfold 6 { a8 }
-% go back to default behavior
-\time 6/8
-\repeat unfold 6 { a8 }
+@lilypond[quote,verbatim]
+\relative a' {
+ \time 6/8
+ \repeat unfold 6 { a8 }
+ % group (4 + 2)
+ \set Timing.beatStructure = 4,2
+ \repeat unfold 6 { a8 }
+ % go back to default behavior
+ \time 6/8
+ \repeat unfold 6 { a8 }
+}
@end lilypond
The default automatic beaming settings for a time signature
@code{beamExceptions} rule can override the @code{beatStructure} setting
if @code{beamExceptions} is not reset.
-@lilypond[quote,verbatim,relative=2]
+@lilypond[quote,verbatim,fragment]
\time 4/4
\set Timing.baseMoment = #(ly:make-moment 1/8)
-\set Timing.beatStructure = #'(3 3 2)
+\set Timing.beatStructure = 3,3,2
% This won't beam (3 3 2) because of beamExceptions
-\repeat unfold 8 {c8} |
+\repeat unfold 8 {c''8} |
% This will beam (3 3 2) because we clear beamExceptions
\set Timing.beamExceptions = #'()
-\repeat unfold 8 {c8}
+\repeat unfold 8 {c''8}
@end lilypond
In a similar fashion, eighth notes in 3/4 time are beamed as a full
measure by default. To beam eighth notes in 3/4 time on the beat,
reset @code{beamExceptions}.
-@lilypond[quote,verbatim,relative=2]
+@lilypond[quote,verbatim,fragment]
\time 3/4
% by default we beam in (6) due to beamExceptions
-\repeat unfold 6 {a8} |
+\repeat unfold 6 {a'8} |
% This will beam (1 1 1) due to default baseMoment and beatStructure
\set Timing.beamExceptions = #'()
-\repeat unfold 6 {a8}
+\repeat unfold 6 {a'8}
@end lilypond
In engraving from the Romantic and Classical periods,
This behavior is controlled by the context property @code{beamHalfMeasure},
which has effect only in time signatures with 3 in the numerator:
-@lilypond[quote,verbatim,relative=2]
-\time 3/4
-r4. a8 a a |
-\set Timing.beamHalfMeasure = ##f
-r4. a8 a a |
+@lilypond[quote,verbatim]
+\relative a' {
+ \time 3/4
+ r4. a8 a a |
+ \set Timing.beamHalfMeasure = ##f
+ r4. a8 a a |
+}
@end lilypond
@subsubsubheading How automatic beaming works
One way to avoid this problem is to set the time signature
in only one staff.
-@lilypond[quote,verbatim,relative=2]
+@lilypond[quote,verbatim]
<<
\new Staff {
\time 3/4
\set Timing.baseMoment = #(ly:make-moment 1/8)
- \set Timing.beatStructure = #'(1 5)
+ \set Timing.beatStructure = 1,5
\set Timing.beamExceptions = #'()
- \repeat unfold 6 { a8 }
+ \repeat unfold 6 { a'8 }
}
\new Staff {
- \repeat unfold 6 { a8 }
+ \repeat unfold 6 { a'8 }
}
>>
@end lilypond
beaming settings for a time signature are described in
@ref{Time signature}.
-@lilypond[quote,verbatim,relative=2]
+@lilypond[quote,verbatim]
<<
\new Staff {
\overrideTimeSignatureSettings
3/4 % timeSignatureFraction
1/8 % baseMomentFraction
- #'(1 5) % beatStructure
+ 1,5 % beatStructure
#'() % beamExceptions
\time 3/4
- \repeat unfold 6 { a8 }
+ \repeat unfold 6 { a'8 }
}
\new Staff {
\time 3/4
- \repeat unfold 6 { a8 }
+ \repeat unfold 6 { a'8 }
}
>>
@end lilypond
notes. Such beams can be specified manually by
marking the begin and end point with @code{[} and @code{]}.
-@lilypond[quote,relative=1,verbatim]
-r4 r8[ g' a r] r g[ | a] r
+@lilypond[quote,verbatim]
+\relative { r4 r8[ g' a r] r g[ | a] r }
@end lilypond
@cindex manual beams, direction shorthand for
Beaming direction can be set manually using direction indicators:
-@lilypond[quote,relative=2,verbatim]
-c8^[ d e] c,_[ d e f g]
+@lilypond[quote,verbatim]
+\relative { c''8^[ d e] c,_[ d e f g] }
@end lilypond
@funindex \noBeam
-@funindex noBeam
Individual notes may be marked with @code{\noBeam} to prevent them
from being beamed:
-@lilypond[quote,verbatim,relative=2]
-\time 2/4
-c8 c\noBeam c c
+@lilypond[quote,verbatim]
+\relative {
+ \time 2/4
+ c''8 c\noBeam c c
+}
@end lilypond
Grace note beams and normal note beams can occur simultaneously.
Unbeamed grace notes are not put into normal note beams.
-@lilypond[quote,verbatim,relative=2]
-c4 d8[
-\grace { e32 d c d }
-e8] e[ e
-\grace { f16 }
-e8 e]
+@lilypond[quote,verbatim]
+\relative {
+ c''4 d8[
+ \grace { e32 d c d }
+ e8] e[ e
+ \grace { f16 }
+ e8 e]
+}
@end lilypond
@funindex stemLeftBeamCount
with only one beam on the left side, i.e., the eighth-note beam of
the group as a whole.
-@lilypond[quote,relative=2,verbatim]
-a8[ r16 f g a]
-a8[ r16
-\set stemLeftBeamCount = #2
-\set stemRightBeamCount = #1
-f16
-\set stemLeftBeamCount = #1
-g16 a]
+@lilypond[quote,verbatim]
+\relative a' {
+ a8[ r16 f g a]
+ a8[ r16
+ \set stemLeftBeamCount = #2
+ \set stemRightBeamCount = #1
+ f16
+ \set stemLeftBeamCount = #1
+ g16 a]
+}
@end lilypond
@cindex feathered beams
@funindex \featherDurations
-@funindex featherDurations
@funindex grow-direction
Feathered beams are used to indicate that a small group of notes
lengthening. The first four 32nd notes gradually speed up, while
the last four 32nd notes are at a constant tempo.
-@lilypond[relative=1,verbatim,quote]
-\override Beam.grow-direction = #LEFT
-\featherDurations #(ly:make-moment 2/1)
-{ c16[ c c c c c c c] }
-\override Beam.grow-direction = #RIGHT
-\featherDurations #(ly:make-moment 2/3)
-{ c32[ d e f] }
-% revert to non-feathered beams
-\override Beam.grow-direction = #'()
-{ g32[ a b c] }
+@lilypond[verbatim,quote]
+\relative c' {
+ \override Beam.grow-direction = #LEFT
+ \featherDurations #(ly:make-moment 2/1)
+ { c16[ c c c c c c c] }
+ \override Beam.grow-direction = #RIGHT
+ \featherDurations #(ly:make-moment 2/3)
+ { c32[ d e f] }
+ % revert to non-feathered beams
+ \override Beam.grow-direction = #'()
+ { g32[ a b c] }
+}
@end lilypond
@noindent
@cindex repeat bars
@funindex \bar
-@funindex bar
Bar lines delimit measures, and are also used to indicate
repeats. Normally, simple bar lines are automatically inserted
other types with the @code{\bar} command. For example, a closing
double bar line is usually placed at the end of a piece:
-@lilypond[quote,relative=1,verbatim]
-e4 d c2 \bar "|."
+@lilypond[quote,verbatim]
+\relative { e'4 d c2 \bar "|." }
@end lilypond
It is not invalid if the final note in a measure does not
@warning{An incorrect duration can cause line breaks to be
inhibited, leading to a line of highly compressed music or
-music which flows off the page.}
+music that flows off the page.}
@cindex line breaks
@cindex bar lines, invisible
Two types of simple bar lines and five types of double bar lines are
available for manual insertion:
-@lilypond[quote,relative=1,verbatim]
-f1 \bar "|"
-f1 \bar "."
-g1 \bar "||"
-a1 \bar ".|"
-b1 \bar ".."
-c1 \bar "|.|"
-d1 \bar "|."
-e1
+@lilypond[quote,verbatim]
+\relative {
+ f'1 \bar "|"
+ f1 \bar "."
+ g1 \bar "||"
+ a1 \bar ".|"
+ b1 \bar ".."
+ c1 \bar "|.|"
+ d1 \bar "|."
+ e1
+}
@end lilypond
@noindent
together with dotted and dashed bar lines:
-@lilypond[quote,relative=1,verbatim]
-f1 \bar ";"
-g1 \bar "!"
-a1
+@lilypond[quote,verbatim]
+\relative {
+ f'1 \bar ";"
+ g1 \bar "!"
+ a1
+}
@end lilypond
@noindent
and nine types of repeat bar lines:
-@lilypond[quote,relative=1,verbatim]
-f1 \bar ".|:"
-g1 \bar ":..:"
-a1 \bar ":|.|:"
-b1 \bar ":|.:"
-c1 \bar ":.|.:"
-d1 \bar "[|:"
-e1 \bar ":|][|:"
-f1 \bar ":|]"
-g1 \bar ":|."
-a1
+@lilypond[quote,verbatim]
+\relative {
+ f'1 \bar ".|:"
+ g1 \bar ":..:"
+ a1 \bar ":|.|:"
+ b1 \bar ":|.:"
+ c1 \bar ":.|.:"
+ d1 \bar "[|:"
+ e1 \bar ":|][|:"
+ f1 \bar ":|]"
+ g1 \bar ":|."
+ a1
+}
@end lilypond
Additionally, a bar line can be printed as a simple tick:
-@lilypond[quote,relative=1,verbatim]
-f1 \bar "'" g1
+@lilypond[quote,fragment,verbatim]
+f'1 \bar "'" g'1
@end lilypond
However, as such ticks are typically used in Gregorian chant, it is
preferable to use @code{\divisioMinima} there instead, described in
the section @ref{Divisiones} in Gregorian chant.
-Lilypond supports kievan notation and provides a special kievan
+LilyPond supports kievan notation and provides a special kievan
bar line:
-@lilypond[quote,relative=1,verbatim]
-f1 \bar "k"
+@lilypond[quote,fragment,verbatim]
+f'1 \bar "k"
@end lilypond
Further details of this notation are explained in
@ref{Typesetting Kievan square notation}.
For in-line segno signs, there are three types of bar lines which
differ in their behavior at line breaks:
-@lilypond[quote,relative=2,verbatim]
-c4 c c c
-\bar "S"
-c4 c c c \break
-\bar "S"
-c4 c c c
-\bar "S-|"
-c4 c c c \break
-\bar "S-|"
-c4 c c c
-\bar "S-S"
-c4 c c c \break
-\bar "S-S"
-c1
+@lilypond[quote,verbatim]
+\relative c'' {
+ c4 c c c
+ \bar "S"
+ c4 c c c \break
+ \bar "S"
+ c4 c c c
+ \bar "S-|"
+ c4 c c c \break
+ \bar "S-|"
+ c4 c c c
+ \bar "S-S"
+ c4 c c c \break
+ \bar "S-S"
+ c1
+}
@end lilypond
@cindex repeats
line at the end of the line and a start repeat at the beginning of
the next line.
-@lilypond[quote,relative=2,verbatim]
-c4 c c c
-\bar ".|:-||"
-c4 c c c \break
-\bar ".|:-||"
-c4 c c c
+@lilypond[quote,verbatim]
+\relative c'' {
+ c4 c c c
+ \bar ".|:-||"
+ c4 c c c \break
+ \bar ".|:-||"
+ c4 c c c
+}
@end lilypond
For combinations of repeats with the segno sign, there are six different
variations:
-@lilypond[quote,relative=2,verbatim]
-c4 c c c
-\bar ":|.S"
-c4 c c c \break
-\bar ":|.S"
-c4 c c c
-\bar ":|.S-S"
-c4 c c c \break
-\bar ":|.S-S"
-c4 c c c
-\bar "S.|:-S"
-c4 c c c \break
-\bar "S.|:-S"
-c4 c c c
-\bar "S.|:"
-c4 c c c \break
-\bar "S.|:"
-c4 c c c
-\bar ":|.S.|:"
-c4 c c c \break
-\bar ":|.S.|:"
-c4 c c c
-\bar ":|.S.|:-S"
-c4 c c c \break
-\bar ":|.S.|:-S"
-c1
+@lilypond[quote,verbatim]
+\relative c'' {
+ c4 c c c
+ \bar ":|.S"
+ c4 c c c \break
+ \bar ":|.S"
+ c4 c c c
+ \bar ":|.S-S"
+ c4 c c c \break
+ \bar ":|.S-S"
+ c4 c c c
+ \bar "S.|:-S"
+ c4 c c c \break
+ \bar "S.|:-S"
+ c4 c c c
+ \bar "S.|:"
+ c4 c c c \break
+ \bar "S.|:"
+ c4 c c c
+ \bar ":|.S.|:"
+ c4 c c c \break
+ \bar ":|.S.|:"
+ c4 c c c
+ \bar ":|.S.|:-S"
+ c4 c c c \break
+ \bar ":|.S.|:-S"
+ c1
+}
@end lilypond
Additionally there is an @code{\inStaffSegno} command which creates
@ref{Normal repeats}.
@funindex \defineBarLine
-@funindex defineBarLine
@cindex bar lines, defining
@cindex defining bar lines
The part following the @code{"-"} sign is not used for building up
the bar line.
-@lilypond[quote,relative=2,verbatim]
+@lilypond[quote,verbatim]
\defineBarLine "||-dashedSpan" #'("||" "" "!!")
\new StaffGroup <<
- \new Staff {
+ \new Staff \relative c'' {
c1 \bar "||"
c1 \bar "||-dashedSpan"
c1
}
- \new Staff {
+ \new Staff \relative c'' {
c1
c1
c1
Furthermore, the space character @code{" "} serves as a placeholder
for defining span bars correctly aligned to the main bar lines:
-@lilypond[quote,relative=2,verbatim]
+@lilypond[quote,verbatim]
\defineBarLine ":|.-wrong" #'(":|." "" "|.")
\defineBarLine ":|.-right" #'(":|." "" " |.")
\new StaffGroup <<
- \new Staff {
+ \new Staff \relative c'' {
c1 \bar ":|.-wrong"
c1 \bar ":|.-right"
c1
}
- \new Staff {
+ \new Staff \relative c'' {
c1
c1
c1
@end lilypond
If additional elements are needed, LilyPond provides a simple
-way to define them. For more informations on modifying or adding
+way to define them. For more information on modifying or adding
bar lines, see file @file{scm/bar-line.scm}.
In scores with many staves, a @code{\bar} command in one staff is
connected between different staves of a @code{StaffGroup},
@code{PianoStaff}, or @code{GrandStaff}.
-@lilypond[quote,relative=1,verbatim]
+@lilypond[quote,verbatim]
<<
\new StaffGroup <<
- \new Staff {
- e4 d
+ \new Staff \relative {
+ e'4 d
\bar "||"
f4 e
}
- \new Staff { \clef bass c4 g e g }
+ \new Staff \relative { \clef bass c'4 g e g }
>>
- \new Staff { \clef bass c2 c2 }
+ \new Staff \relative { \clef bass c'2 c2 }
>>
@end lilypond
@funindex whichBar
@funindex defaultBarType
@funindex \bar
-@funindex bar
@funindex bartype
The command @samp{\bar @var{bartype}} is a shortcut for
@code{currentBarNumber} property, which is normally updated
automatically for every measure. It may also be set manually:
-@lilypond[verbatim,quote,relative=1]
-c1 c c c
-\break
-\set Score.currentBarNumber = #50
-c1 c c c
+@lilypond[verbatim,quote]
+\relative c' {
+ c1 c c c
+ \break
+ \set Score.currentBarNumber = #50
+ c1 c c c
+}
@end lilypond
@cindex bar numbers, regular spacing
@funindex barNumberVisibility
@funindex BarNumber
-Bar numbers can be typeset at regular intervals instead of just at
-the beginning of every line. To do this the default behavior
-must be overridden to permit bar numbers to be printed at places
-other than the start of a line. This is controlled by the
-@code{break-visibility} property of @code{BarNumber}. This takes
-three values which may be set to @code{#t} or @code{#f} to specify
-whether the corresponding bar number is visible or not. The order
-of the three values is @code{end of line visible}, @code{middle of
-line visible}, @code{beginning of line visible}. In the following
-example bar numbers are printed at all possible places:
-
-@lilypond[verbatim,quote,relative=1]
-\override Score.BarNumber.break-visibility = ##(#t #t #t)
-\set Score.currentBarNumber = #11
-% Permit first bar number to be printed
-\bar ""
-c1 | c | c | c
-\break
-c1 | c | c | c
+Bar numbers can be typeset at regular intervals instead of just at the
+beginning of every line. To do this the default behavior must be
+overridden to permit bar numbers to be printed at places other than the
+start of a line. This is controlled by the @code{break-visibility}
+property of @code{BarNumber}. This takes three values which may be set
+to @code{#t} or @code{#f} to specify whether the corresponding bar
+number is visible or not. The order of the three values is
+@code{end of line visible}, @code{middle of line visible},
+@code{beginning of line visible}. In the following example bar numbers
+are printed at all possible places:
+
+@lilypond[verbatim,quote]
+\relative c' {
+ \override Score.BarNumber.break-visibility = ##(#t #t #t)
+ \set Score.currentBarNumber = #11
+ % Permit first bar number to be printed
+ \bar ""
+ c1 | c | c | c |
+ \break
+ c1 | c | c | c |
+}
@end lilypond
@snippets
@lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
{printing-bar-numbers-at-regular-intervals.ly}
+@lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
+{printing-bar-numbers-with-changing-regular-intervals.ly}
+
@cindex measure number, format
@cindex bar number, format
@end lilypond
@funindex \barNumberCheck
-@funindex barNumberCheck
When copying large pieces of music, it can be helpful to check that
the LilyPond bar number corresponds to the original that you are
@cindex mark, rehearsal
@funindex \mark
-@funindex mark
To print a rehearsal mark, use the @code{\mark} command.
-@lilypond[quote,verbatim,relative=2]
-c1 \mark \default
-c1 \mark \default
-c1 \mark \default
-c1 \mark \default
+@lilypond[quote,verbatim]
+\relative c'' {
+ c1 \mark \default
+ c1 \mark \default
+ c1 \mark \default
+ c1 \mark \default
+}
@end lilypond
@noindent
mark manually. The value to use is stored in the property
@code{rehearsalMark}.
-@lilypond[quote,verbatim,relative=2]
-c1 \mark \default
-c1 \mark \default
-c1 \mark #8
-c1 \mark \default
-c1 \mark \default
+@lilypond[quote,verbatim]
+\relative c'' {
+ c1 \mark \default
+ c1 \mark \default
+ c1 \mark #8
+ c1 \mark \default
+ c1 \mark \default
+}
@end lilypond
@noindent
\set Score.markFormatter = #format-mark-circle-alphabet
@end example
-@lilypond[quote,verbatim,relative=2]
-\set Score.markFormatter = #format-mark-box-alphabet
-c1 \mark \default
-c1 \mark \default
-c1 \mark #8
-c1 \mark \default
-c1 \mark \default
+@lilypond[quote,verbatim]
+\relative c'' {
+ \set Score.markFormatter = #format-mark-box-alphabet
+ c1 \mark \default
+ c1 \mark \default
+ c1 \mark #8
+ c1 \mark \default
+ c1 \mark \default
+}
@end lilypond
@cindex rehearsal mark format
procedure. After a few measures, it is set to a procedure that
produces a boxed number.
-@lilypond[quote,verbatim,relative=2]
-\set Score.markFormatter = #format-mark-numbers
-c1 \mark \default
-c1 \mark \default
-\set Score.markFormatter = #format-mark-box-numbers
-c1 \mark \default
-\set Score.markFormatter = #format-mark-circle-numbers
-c1 \mark \default
-\set Score.markFormatter = #format-mark-circle-letters
-c1
+@lilypond[quote,verbatim]
+\relative c'' {
+ \set Score.markFormatter = #format-mark-numbers
+ c1 \mark \default
+ c1 \mark \default
+ \set Score.markFormatter = #format-mark-box-numbers
+ c1 \mark \default
+ \set Score.markFormatter = #format-mark-circle-numbers
+ c1 \mark \default
+ \set Score.markFormatter = #format-mark-circle-letters
+ c1
+}
@end lilypond
The file @file{scm/translation-functions.scm} contains the
-definitions of @code{format-mark-numbers} (the default format),
-@code{format-mark-box-numbers}, @code{format-mark-letters} and
-@code{format-mark-box-letters}. These can be used as inspiration
+definitions of @code{format-mark-letters} (the default format),
+@code{format-mark-box-letters}, @code{format-mark-numbers} and
+@code{format-mark-box-numbers}. These can be used as inspiration
for other formatting functions.
You may use @code{format-mark-barnumbers},
@cindex glyphs, music
@funindex \musicglyph
-@funindex musicglyph
Music glyphs (such as the segno sign) may be printed inside a
@code{\mark}
-@lilypond[quote,verbatim,relative=1]
-c1 \mark \markup { \musicglyph #"scripts.segno" }
-c1 \mark \markup { \musicglyph #"scripts.coda" }
-c1 \mark \markup { \musicglyph #"scripts.ufermata" }
-c1
+@lilypond[quote,verbatim]
+\relative c' {
+ c1 \mark \markup { \musicglyph #"scripts.segno" }
+ c1 \mark \markup { \musicglyph #"scripts.coda" }
+ c1 \mark \markup { \musicglyph #"scripts.ufermata" }
+ c1
+}
@end lilypond
@noindent
-See @ref{The Feta font}, for a list of symbols which may be
+See @ref{The Emmentaler font}, for a list of symbols which may be
printed with @code{\musicglyph}.
For common tweaks to the positioning of rehearsal marks, see
@seealso
Notation Reference:
-@ref{The Feta font},
+@ref{The Emmentaler font},
@ref{Formatting text},
@ref{Aligning objects}.
Grace notes are musical ornaments, printed in a smaller font, that take
up no additional logical time in a measure.
-@lilypond[quote,relative=2,verbatim]
-c4 \grace b16 a4(
-\grace { b16 c16 } a2)
+@lilypond[quote,verbatim]
+\relative {
+ c''4 \grace b16 a4(
+ \grace { b16 c16 } a2)
+}
@end lilypond
There are three other types of grace notes possible; the
between notes that are slurred themselves, using the
@code{\slashedGrace} function.
-@lilypond[quote,relative=2,verbatim]
-\acciaccatura d8 c4
-\appoggiatura e8 d4
-\acciaccatura { g16 f } e2
-\slashedGrace a,8 g4
-\slashedGrace b16 a4(
-\slashedGrace b8 a2)
+@lilypond[quote,verbatim]
+\relative {
+ \acciaccatura d''8 c4
+ \appoggiatura e8 d4
+ \acciaccatura { g16 f } e2
+ \slashedGrace a,8 g4
+ \slashedGrace b16 a4(
+ \slashedGrace b8 a2)
+}
@end lilypond
The placement of grace notes is synchronized between different staves.
In the following example, there are two sixteenth grace notes for every
eighth grace note
-@lilypond[quote,relative=2,verbatim]
+@lilypond[quote,verbatim]
<<
- \new Staff { e2 \grace { c16 d e f } e2 }
- \new Staff { c2 \grace { g8 b } c2 }
+ \new Staff \relative { e''2 \grace { c16 d e f } e2 }
+ \new Staff \relative { c''2 \grace { g8 b } c2 }
>>
@end lilypond
@cindex grace notes, following
@funindex \afterGrace
-@funindex afterGrace
If you want to end a note with a grace, use the @code{\afterGrace}
command. It takes two arguments: the main note, and the grace
notes following the main note.
-@lilypond[quote,verbatim,relative=2]
-c1 \afterGrace d1 { c16[ d] } c1
+@lilypond[quote,verbatim]
+\relative { c''1 \afterGrace d1 { c16[ d] } c1 }
@end lilypond
-This will put the grace notes after a space lasting 3/4 of the
-length of the main note. The default fraction 3/4 can be changed by
-setting @code{afterGraceFraction}. The following example shows
-the results from setting the space at the default, at 15/16, and
-finally at 1/2 of the main note.
+This will place the grace notes @emph{after} the start of the main
+note. The point of time where the grace notes are placed is a
+given fraction of the main note's duration. The default setting
+of
+
+@example
+afterGraceFraction = 3/4
+@end example
-@lilypond[quote,verbatim,relative=2]
+@noindent
+may be redefined at top level. Individual @code{\afterGrace}
+commands may have the fraction specified right after the command
+itself instead.
+
+The following example shows the results from setting with the
+default space, setting it at @code{15/16}, and finally at
+@code{1/2} of the main note.
+
+@lilypond[quote,verbatim]
<<
- \new Staff {
- c1 \afterGrace d1 { c16[ d] } c1
+ \new Staff \relative {
+ c''1 \afterGrace d1 { c16[ d] } c1
}
- \new Staff {
- #(define afterGraceFraction (cons 15 16))
- c1 \afterGrace d1 { c16[ d] } c1
+ \new Staff \relative {
+ c''1 \afterGrace 15/16 d1 { c16[ d] } c1
}
- \new Staff {
- #(define afterGraceFraction (cons 1 2))
- c1 \afterGrace d1 { c16[ d] } c1
+ \new Staff \relative {
+ c''1 \afterGrace 1/2 d1 { c16[ d] } c1
}
>>
@end lilypond
-The space between the main note and the grace note may also be
-specified using spacers. The following example places the grace
-note after a space lasting 7/8 of the main note.
+The effect of @code{\afterGrace} can also be achieved using
+spacers. The following example places the grace note after a
+space lasting 7/8 of the main note.
-@lilypond[quote,verbatim,relative=2]
-\new Voice {
+@lilypond[quote,verbatim]
+\new Voice \relative {
<<
- { d1^\trill_( }
+ { d''1^\trill_( }
{ s2 s4. \grace { c16 d } }
>>
c1)
inside the grace expression. Here, the grace note's default stem
direction is overridden and then reverted.
-@lilypond[quote,verbatim,relative=2]
-\new Voice {
+@lilypond[quote,verbatim]
+\new Voice \relative {
\acciaccatura {
\stemDown
- f16->
+ f''16->
\stemNeutral
}
g4 e c2
synchronized. Take care when you mix staves with grace notes and
staves without, for example,
-@lilypond[quote,relative=2,verbatim]
+@lilypond[quote,verbatim]
<<
- \new Staff { e4 \bar ".|:" \grace c16 d2. }
- \new Staff { c4 \bar ".|:" d2. }
+ \new Staff \relative { e''4 \bar ".|:" \grace c16 d2. }
+ \new Staff \relative { c''4 \bar ".|:" d2. }
>>
@end lilypond
This can be remedied by inserting grace skips of the corresponding
durations in the other staves. For the above example
-@lilypond[quote,relative=2,verbatim]
+@lilypond[quote,verbatim]
<<
- \new Staff { e4 \bar ".|:" \grace c16 d2. }
- \new Staff { c4 \bar ".|:" \grace s16 d2. }
+ \new Staff \relative { e''4 \bar ".|:" \grace c16 d2. }
+ \new Staff \relative { c''4 \bar ".|:" \grace s16 d2. }
>>
@end lilypond
@end lilypond
@noindent
-As the example illustrates, @code{ly:make-moment n m} constructs a
+As the example illustrates, @code{ly:make-moment n/m} constructs a
duration of n/m of a whole note. For example,
-@code{ly:make-moment 1 8} is an eighth note duration and
-@code{ly:make-moment 7 16} is the duration of seven sixteenths
+@code{ly:make-moment 1/8} is an eighth note duration and
+@code{ly:make-moment 7/16} is the duration of seven sixteenths
notes.
@seealso
projects / lilypond.git / blobdiff