-%% Do not edit this file; it is auto-generated from LSR http://lsr.dsi.unimi.it
+%% Do not edit this file; it is automatically
+%% generated from LSR http://lsr.dsi.unimi.it
%% This file is in the public domain.
-\version "2.13.1"
+\version "2.13.39"
\header {
lsrtags = "rhythms"
-%% Translation of GIT committish: 5c26e815f2ed54e6c4d022bac10dcc87a9916a29
+%% Translation of GIT committish: a874fda3641c9e02f61be5c41b215b8304b8ed00
texidoces = "
- Son posibles tanto los corchetes rectos sobre notas sueltas como
+Son posibles tanto los corchetes rectos sobre notas sueltas como
extremos de barra sueltos en figuras unidas, con una combinación de
@code{stemLeftBeamCount}, @code{stemRightBeamCount} e indicadores de
-barra @code{[ ]} emparejados.
+barra @code{[]} emparejados.
Para corchetes rectos que apunten a la derecha sobre notas sueltas,
-use indicadores de barra emparejados @code{[ ]} y establezca
+use indicadores de barra emparejados @code{[]} y establezca
@code{stemLeftBeamCount} a cero (véase el ejemplo 1).
Para corchetes rectos que apunten a la izquierda, establezca en su
(Observe que @code{\\set stemLeftBeamCount} siempre equivale a
@code{\\once \\set}. En otras palabras, los ajustes de la cantidad de
barras no se recuerdan, y por ello el par de corchetes planos
-aplicados a la nota Do semicorchea @code{c'16 [ ]} del último ejemplo
-no tiene nada que ver con el @code{\\set} de dos notas por detrás.)
+aplicados a la nota Do semicorchea @code{c'16[]} del último ejemplo no
+tiene nada que ver con el @code{\\set} de dos notas por detrás.)
"
doctitlees = "Corchetes rectos y extremos de barra sueltos"
-%% Translation of GIT committish: 0364058d18eb91836302a567c18289209d6e9706
+
+%% Translation of GIT committish: 0a868be38a775ecb1ef935b079000cebbc64de40
texidocde = "
Gerade Fähnchen an einzelnen Noten und überstehende Balkenenden bei
bebalkten Notengruppen sind möglich mit einer Kombination aus
(@code{\\set stemLeftBeamCount} entspricht immer dem Befehl
@code{\\once \\set}. Anders gesagt müssen die Einstellungen immer wieder
-wiederholt werden und die Fähnchen des letzten Sechszehntels im letzten
+wiederholt werden und die Fähnchen des letzten Sechzehntels im letzten
Beispiel haben nichts mit dem @code{\\set}-Befehl zwei Noten vorher zu tun.)
"
doctitlede = "Gerade Fähnchen und überstehende Balkenenden"
+
+
+%% Translation of GIT committish: 190a067275167c6dc9dd0afef683d14d392b7033
+ texidocfr = "
+En combinant @code{stemLeftBeamCount}, @code{stemRightBeamCount} et des
+paires de @code{[]}, vous pourrez obtenir des crochets rectilignes et
+des ligatures qui débordent à leurs extrémités.
+
+Pour des crochets rectilignes à droite sur des notes isolées, il suffit
+d'ajouter une paire d'indicateurs de ligature @code{[]} et de déterminer
+@code{stemLeftBeamCount} à zéro, comme dans l'exemple@tie{}1.
+
+Pour des crochets rectiligne à gauche, c'est @code{stemRightBeamCount}
+qu'il faudra déterminer (exemple@tie{}2).
+
+Pour que les barres de ligature débordent sur la droite,
+@code{stemRightBeamCount} doit avoir une valeur positive@tie{}; pour un
+débrodement à gauche, c'est sur @code{stemLeftBeamCount} qu'il faut
+jouer. Tout ceci est illustré par l'exemple@tie{}3.
+
+Il est parfois judicieux, lorsqu'une note est encadrée de silences, de
+l'affubler de crochets rectilignes de part et d'autre. L'exemple@tie{}4
+montre qu'il suffit d'adjoindre à cette note un @code{[]}.
+
+(Notez bien que @code{\\set@tie{}stemLeftBeamCount} sera toujours
+synonyme de @code{\\once@tie{}\\set}. Autrement dit, la détermination
+des ligatures n'est pas @qq{permanente}@tie{}; c'est la raison pour
+laquelle les crochets du @code{c'16[]} isolé du dernier exemple n'ont
+rien à voir avec le @code{\\set} indiqué deux notes auparavant.)
+
+"
+ doctitlefr = "Crochet rectiligne et débordement de ligature"
+
texidoc = "
Flat flags on lone notes and beam nibs at the ends of beamed figures
-are both possible with a combination of @code{stemLeftBeamCount},
+are both possible with a combination of @code{stemLeftBeamCount},
@code{stemRightBeamCount} and paired @code{[]} beam indicators.
Sometimes it may make sense for a lone note surrounded by rests to
carry both a left- and right-pointing flat flag. Do this with paired
-@code{[]} beam indicators alone (Example 4).
+@code{[]} beam indicators alone (Example 4).
-(Note that @code{\\set stemLeftBeamCount} is always equivalent to
-@code{\\once \\set}. In other words, the beam count settings are not
-\"sticky\", so the pair of flat flags attached to the lone
-@code{c'16[]} in the last example have nothing to do with the
+(Note that @code{\\set stemLeftBeamCount} is always equivalent to
+@code{\\once \\set}. In other words, the beam count settings are not
+@qq{sticky}, so the pair of flat flags attached to the lone
+@code{c'16[]} in the last example have nothing to do with the
@code{\\set} two notes prior.)
c16[]
r8.
}
-
% Example 2
\new RhythmicStaff {
r8.
\set stemRightBeamCount = #0
c16[]
}
-
% Example 3
\new RhythmicStaff {
c16 c
\set stemLeftBeamCount = #2
c16 c c
}
-
% Example 4
\new RhythmicStaff {
c16 c