--- /dev/null
+% Feta (not the Font-En-Tja) music font -- bold Orator numerals
+% This file is part of LilyPond, the GNU music typesetter.
+%
+% Copyright (C) 1997--2011 Jan Nieuwenhuizen <janneke@gnu.org>
+%
+% LilyPond is free software: you can redistribute it and/or modify
+% it under the terms of the GNU General Public License as published by
+% the Free Software Foundation, either version 3 of the License, or
+% (at your option) any later version.
+%
+% LilyPond is distributed in the hope that it will be useful,
+% but WITHOUT ANY WARRANTY; without even the implied warranty of
+% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+% GNU General Public License for more details.
+%
+% You should have received a copy of the GNU General Public License
+% along with LilyPond. If not, see <http://www.gnu.org/licenses/>.
+
+
+height# := number_design_size;
+space# := number_design_size / 2;
+
+font_x_height height#;
+font_normal_space space#;
+
+
+%
+% DOCME!
+%
+% ugh. b and h are reused.
+%
+
+save b, h;
+4 h + b = 1.15;
+10 h + b = 1;
+fatten := number_design_size * h + b;
+
+save b, h;
+4 h + b = 1.05;
+10 h + b = 1;
+widen := number_design_size * h + b;
+
+tense = 0.85;
+thick# := 7/30 height# * fatten;
+thin# := thick# / 4 * fatten + max (.1 (height# / 10 - 1), 0);
+
+%% sqrt (.8 * blot_diameter# * thin#);
+hair# := thin# * .8;
+
+flare# := 9/8 thick# + .75 (height# / 10 - 1);
+
+save b, h;
+4h + b = 1/8;
+10h + b = 1/6;
+kuulleke# := thick# * number_design_size * h + b;
+foot_top# := thick#;
+foot_width# := 9/4 thick#;
+
+
+%
+% These numbers were taken from a part that the EJE violas played in
+% 1997 -- Probably Mendelssohn's ouverture `Heimkehr aus der Fremde'.
+%
+
+
+%
+% TODO all the invocation of flare_path are weird --
+% the horizontal tangents should be more at the center of the
+% glyph.
+%
+
+define_pixels (height, thick, thick, thin, hair, flare);
+define_pixels (foot_top, foot_width);
+define_pixels (kuulleke);
+
+
+%
+% Yet Another Bulb Routine with smooth inside curve.
+%
+% alpha = start direction.
+% beta = which side to turn to
+% flare = diameter of the bulb
+% line = diameter of line attachment
+% direction = is ink on left or right side (1 or -1)
+%
+%
+% move_away_to = amount left (for 2)
+% turn_to = amount down (for 2)
+%
+
+def number_flare_path (expr pos, alpha, beta, line, flare,
+ move_away_to, turn_to, taille, taille_ratio,
+ direction) =
+begingroup;
+ save res;
+ path res;
+
+ clearxy;
+
+% z5 = z2 + 0.43 * flare * dir (alpha - 1.5 beta);
+
+ z4 = (0.75 - taille) [z2r, z2l] + whatever * dir (alpha - beta);
+ z4 = (taille_ratio * taille) [z3l, z3r] + whatever * dir (alpha);
+
+ z1r = pos;
+ z2r = z1r + move_away_to * dir (alpha)
+ + (line + turn_to) * dir (alpha + beta);
+ z3r = 0.5 [z2l, z2r] + 0.5 * flare * dir (alpha + beta);
+
+ penpos1 (line, 180 + beta + alpha);
+ penpos2 (flare, alpha);
+ penpos3 (flare, alpha + beta);
+
+ penlabels (1, 2, 3, 4, 5);
+
+ res := z1r{dir (alpha)}
+ .. z2r{dir (180 + alpha - beta)}
+ .. z3r{dir (alpha + 180)}
+ .. z2l{dir (alpha - beta)}
+
+%%% Two versions of the curve: one with z4, the other with z5.
+% .. z5{dir (alpha - beta / 2)}
+
+ .. z4{dir (180 + alpha + beta)}
+ .. z1l{dir (alpha + 180)};
+
+% pickup pencircle;
+% draw res;
+
+ if direction <> 1:
+ res := reverse res;
+ fi;
+
+res
+endgroup
+enddef;
+
+
+def calc_kuulleke (expr w, alpha) =
+begingroup;
+ save beta, gamma;
+
+ beta = (alpha - 90) / 2;
+ gamma = (90 + alpha) / 2;
+
+ penpos1 (w / cosd (alpha), alpha);
+ penpos2 (hair, 90 + beta);
+ penpos3 (hair, gamma - 90);
+
+ z2 = z1l + (1/2 hair / tand ((alpha + 90) / 2)) * dir (beta);
+ z3 = z1r - (1/2 hair / tand ((90 - alpha) / 2)) * dir (gamma);
+ z4 = z1 + kuulleke * dir (alpha - 90);
+endgroup;
+enddef;
+
+
+% should make generic macro?
+%
+def draw_foot (expr xpos) =
+begingroup;
+ clearxy;
+
+ penpos1 (thick, 0);
+ penpos2 (foot_width, 0);
+ penpos3 (hair, -90);
+ penpos4 (hair, 90);
+
+ z1= (xpos, foot_top);
+ z2= (x1, 0);
+ z3r = z2r;
+ z4l = z2l;
+ z5 = (x1, kuulleke);
+
+ penlabels (1, 2, 3, 4);
+
+ fill z1
+ .. {right}z1r{down}
+ .. {right}z3l
+ .. z3r{left}
+ .. z5
+ .. {left}z4l
+ .. z4r{right}
+ .. {up}z1l{right}
+ .. z1
+ .. cycle;
+endgroup;
+enddef;
+
+
+def draw_six =
+ save outer_t, t;
+ save before, after, u, v;
+ path before, after;
+
+ set_char_box (0, .68 height# * widen, 0, height#);
+
+ message "w:" & decimal w;
+ message "h:" & decimal h;
+
+ penpos2 (hair, 90);
+ z2 = (w / 2, h / 2 + thin - hair / 2);
+
+ penpos3 (15/16 thick, 0);
+ x3r = w;
+ y3r = .5 [y4r, y2r];
+
+ penpos4 (hair, -90);
+ z4r = (x2, 0);
+
+ penpos6 (hair, 90);
+ x6r = .56 w;
+ y6r = h;
+
+ penpos7 (thick, 180);
+ x7r = 0;
+ y7r = .50 h;
+
+ penpos10 (thick, 180);
+ z10r = (0, y3);
+
+ penlabels (range 1 thru 10);
+
+ outer_t = 0.88;
+ t := tense;
+
+ before := z7{right}
+ .. z2r{right};
+ after := z7r{up}
+ .. number_flare_path (z6r, 0, -90, hair, flare,
+ w - x6r - hair / 2, .16 h,
+ 0.05, 2.5, 1)
+ .. z7l{down};
+ (u, v) = before intersectiontimes after;
+
+% draw
+ fill subpath (u, infinity) of before
+ ..tension outer_t.. z3r{down}
+ ..tension outer_t.. z4r{left}
+ .. subpath (0, v) of after
+ .. cycle;
+
+ unfill z2l{right}
+ ..tension t.. z3l{down}
+ ..tension t.. z4l{left}
+ ..tension t.. z10l{up}
+ ..tension t.. cycle;
+enddef;
+
+
+save dot_diam;
+dot_diam# = 7/8 flare#;
+define_pixels (dot_diam);
+
+
+code := 42; % , 43
+
+fet_beginchar ("Plus", "plus");
+ set_char_box (0, .5 height#, -0.25 height#, 0.75 height#);
+
+ save hthick, vthick, size, outer_hsize, outer_vsize;
+
+ hthick# = vthick# = 2 linethickness#;
+ size# = 1.1 staff_space#;
+ define_whole_blacker_pixels (vthick);
+ define_whole_vertical_blacker_pixels (hthick);
+
+ outer_hsize = hround ((b + w - vthick) / 2);
+ outer_vsize = vround ((h + d - hthick) / 2);
+
+ centerx := hround (w / 2);
+ centery := vround ((h - d) / 2);
+
+ z1 = (centerx - hthick / 2, -d);
+ z2 = (centerx + hthick / 2, h);
+
+ labels (1, 2);
+
+ draw_rounded_block (z1, z2, hthick);
+ draw_rounded_block ((0, centery - vthick / 2),
+ (w, (centery + vthick / 2)),
+ vthick);
+fet_endchar;
+
+
+code := 43; % , = 44
+
+fet_beginchar ("Numeral comma", "comma");
+ save pat, pos;
+ path pat;
+
+ set_char_box (0, dot_diam#, 3/2 dot_diam#, dot_diam#);
+
+ pat := (dot_diam / 2, 0)
+ .. (dot_diam, dot_diam / 2)
+ .. (dot_diam / 2, dot_diam)
+ .. (0, dot_diam / 2)
+ .. cycle;
+
+ pos = ypart (((w / 3, 0) -- (w / 3, dot_diam / 2))
+ intersectiontimes pat);
+ z0 = point pos of pat;
+
+ alpha = 65;
+ penpos1 (thin, alpha + 90);
+
+ z1l = (w / 2, -1.5 h + hair);
+ z2 = (w, h / 2);
+
+ pickup feta_fillpen;
+
+ % include z0 to assist removal of overlaps
+ fill subpath (0,3) of pat
+ .. z0
+ .. cycle;
+ filldraw z1l{dir (alpha)}
+ .. {up}z2
+ -- z0{direction pos of pat}
+ ..tension 0.95.. {dir (180 + alpha)}z1r
+ .. cycle;
+
+ labels (0, 2);
+ penlabels (1);
+fet_endchar;
+
+
+fet_beginchar ("Numeral dash", "hyphen");
+ set_char_box (0, height# / 3, 0, height#);
+
+ draw_rounded_block ((-b, h / 3 - thin / 2),
+ (w, h / 3 + thin / 2), thin);
+fet_endchar;
+
+
+fet_beginchar ("Numeral dot", "period");
+ set_char_box (0, dot_diam#, 0, dot_diam#);
+
+ pickup pencircle scaled dot_diam;
+
+ drawdot (dot_diam / 2, dot_diam / 2);
+fet_endchar;
+
+
+% skip slash
+
+code := 47; % 0 = 48
+
+fet_beginchar ("Numeral 0", "zero");
+ set_char_box (0, 11/15 height# * widen, 0, height#);
+
+ message "w:" & decimal w;
+ message "h:" & decimal h;
+
+ penpos1 (thin, 90);
+ penpos2 (thick, 180);
+ penpos3 (thin,- 90);
+ penpos4 (thick, 0);
+
+ z1r = (w / 2, h);
+ z2r = (0, h / 2);
+ z3r = (w / 2, 0);
+ z4r = (w, h / 2);
+
+ fill z1r
+ .. z2r
+ .. z3r
+ .. z4r
+ .. cycle;
+
+ save t;
+ t = 1 / tense;
+
+ penlabels (1, 2, 3, 4);
+
+ unfill z1l
+ ..tension t.. z2l
+ ..tension t.. z3l
+ ..tension t.. z4l
+ ..tension t.. cycle;
+fet_endchar;
+
+
+fet_beginchar ("Numeral 1", "one");
+ save alpha, beta, gamma;
+
+% set_char_box (0, 19/30 height# * widen, 0, height#);
+ set_char_box (0, 1/2 foot_width# + 3/2 thick# + 1/2 hair#,
+ 0, height#);
+
+ message "w:" & decimal w;
+ message "h:" & decimal h;
+
+ alpha = 0;
+ calc_kuulleke (thick, alpha);
+ z1 = (3/2 thick, height);
+
+ penpos5 (thick, 0);
+ z5 = (x1, foot_top);
+
+ z6 = (0, h / 2);
+ beta = angle (z1l - z6);
+
+ penpos7 (thin, beta - 90);
+ z7l = z6;
+
+ penpos8 (thin / cosd (beta), -90);
+ z8l = z1l;
+
+ penpos9 (thin, beta - 90);
+ z9r = z8r + (thin / cosd (beta)) * down;
+
+ penlabels (range 1 thru 9);
+
+ gamma = angle (length (z1r - z1), 2 kuulleke);
+
+ fill z2r{dir (alpha - gamma)}
+ .. z4
+ .. {dir (alpha + gamma)}z3l
+ .. z3r{down}
+ -- z5r
+ -- z5l
+ -- z2l{up}
+ .. cycle;
+
+ fill z7l
+ -- z1l{dir (beta)}
+ .. {dir (alpha - gamma)}z2r
+ -- z9r{up}
+ .. {dir (180 + beta)}z9l
+ -- z7r{dir (180 + beta)}
+ .. {dir (beta)}cycle;
+
+ draw_foot (x1);
+fet_endchar;
+
+
+fet_beginchar ("Numeral 2", "two");
+ save tolerance;
+ save alpha, beta, gamma, theta;
+ save flare_start_distance;
+ save t, pat, bow;
+ path pat, bow;
+
+ set_char_box (0, 22/30 height# * widen, 0, height#);
+
+ message "w:" & decimal w;
+ message "h:" & decimal h;
+
+ alpha = -45 * widen;
+ beta = 85;
+ gamma = beta - 10;
+ theta = 20 / widen;
+
+ flare_start = 0.25;
+
+ penpos1 (hair, 90 + beta);
+ z1 = (0, 0) + (1/2 sqrt (2) * hair) * dir (45);
+
+ penpos3 (hair,90 + gamma);
+ z3 = (w, thick) + (1/2 sqrt (2) * hair) * dir (-135);
+
+ penpos2 (thick, 90 + alpha - 15);
+ x2 - x1 = x3 - x2;
+ y2 = 10/16 thick / widen;
+
+ tolerance := epsilon;
+
+ % Find proper tension to exactly touch the x axis.
+ % Later on we directly use `bow'.
+ vardef f (expr t) =
+ bow := z3l{dir (180 + gamma)}
+ ..tension t.. {dir (180 + alpha -5)}z2l;
+ ypart (directionpoint left of bow) < 0
+ enddef;
+
+ % the return value of `solve' is stored in a dummy variable
+ t = solve f (0.8, 1.2);
+
+ fill z1r{dir (beta)}
+ ..tension 0.9.. {dir (alpha + 10)}z2r
+ .. {dir (gamma)}z3r
+ .. bow
+ .. {dir (180 + beta)}z1l
+ .. cycle;
+
+ penpos4 (thick, 0);
+ z4r = (w - thin / 2, .71 h);
+
+ penpos5 (hair, 90);
+ y5r = h;
+ x5r = 9/20 w;
+
+ penlabels (range 1 thru 6);
+
+ t := tense;
+
+ pat := z1l{dir (beta)}
+ ..tension t.. z4r{up}
+ .. number_flare_path (z5r, 180, 90, hair, 1.05 flare,
+ x5r - 1/2 hair, .21 h, 0.006, 0.4, 1)
+ .. z4l{down}
+ ..tension t.. {dir (180 + beta)}z1r
+ -- cycle;
+
+% pickup pencircle scaled 1;
+% draw pat;
+
+ fill pat;
+fet_endchar;
+
+
+%%
+% TODO: should widen a bit. The right edge of the 3 bumps into next glyph in
+% combinations
+%
+fet_beginchar ("Numeral 3", "three");
+ set_char_box (0, 2/3 height# * widen, 0, height#);
+
+ message "w:" & decimal w;
+ message "h:" & decimal h;
+
+ penpos1 (hair, -90);
+
+% flare_start = 0.25;
+
+ x1l = 36/80 w;
+ y1l = h;
+
+% z1l = (17/16 thick, h);
+
+ penpos2 (7/8 thick, 180);
+ x2l = w - thick / 8;
+ y2l = 3/4 h + thick * 3/32;
+
+ penpos3 (thin, 90);
+ z3 = (w / 2, h / 2 + 1/8 thick);
+
+ penpos4 (thin, 90);
+ z4 = (5/8 thick + 1/2 thin, y3);
+
+ penpos5 (thick, 0);
+ x5r = w;
+ y5r = 17/64 h + thick / 16;
+
+ penpos6 (hair, -90);
+ x6r = 37/80 w;
+ y6r = 0;
+
+ penpos7 (3/2 thin, 90);
+ x7 = .83 w;
+ y7 = y3;
+
+ penlabels (range 1 thru 7);
+
+ save alpha, t, outer_t;
+ alpha = 25;
+ t = tense;
+ outer_t := 0.93;
+
+% pickup pencircle scaled 1;
+% draw
+ fill number_flare_path (z1l, 180, 90, hair, 7/8 flare, x1l - .5 hair,
+ .16 h, 0.06, 1.5, -1)
+ ..tension outer_t.. z2l{down}
+ ..tension outer_t.. z7r{dir (180 + alpha)}
+ .. z7l{dir (-alpha)}
+ ..tension outer_t.. z5r{down}
+ ..tension outer_t.. number_flare_path (z6r, 180, -90, hair,
+ flare, x6l, .18 h, 0.06,
+ 1.5, 1)
+ .. z5l{up}
+ ..tension t.. z3l{left}
+ .. z4l{left}
+ .. z4r{right}
+ .. z3r{right}
+ ..tension t.. z2r{up}
+ ..tension t.. cycle;
+fet_endchar;
+
+
+fet_beginchar ("Numeral 4", "four");
+ save alpha, beta, gamma;
+
+ set_char_box (0, 4/5 height# * widen, 0, height#);
+
+ message "w:" & decimal w;
+ message "h:" & decimal h;
+
+ alpha = 0;
+ calc_kuulleke (3/2 thick, alpha);
+
+ z1r = (w - 3/4 thick, height);
+ z5 = (thin, 1/4 height + thin);
+
+ beta = angle (z3r - z5);
+
+ penpos6 (thin, -90);
+ z6l = z5;
+
+ penpos7 (thin, -90);
+ y7 = y6;
+ x7 = w - 1/2 thin;
+
+ penpos8 (thin, -alpha);
+ z8r = z5;
+
+ penlabels (range 1 thru 8);
+
+ gamma = angle (length (z1r - z1), 2 kuulleke);
+
+ fill z2r{dir (alpha - gamma)}
+ .. z4
+ .. {dir (alpha + gamma)}z3l
+ .. {dir (180 + beta)}z3r
+ -- z8r
+ -- z7l{right}
+ .. {left}z7r
+ -- z6r{left}
+ ..tension 0.8 and 2.. z8l{dir (beta)}
+ .. {up}z2l
+ .. cycle;
+
+ clearxy;
+
+ alpha := beta;
+ calc_kuulleke (thick, alpha);
+
+ z1r = (w - 3/4 thick, height - (3/2 thin) / cosd (alpha));
+
+ penpos5 (thick, 0);
+ z5 = (x1, foot_top);
+
+ gamma := angle (length (z1r - z1), 2 kuulleke);
+
+ fill z2r{dir (alpha - gamma)}
+ .. z4
+ .. {dir (alpha + gamma)}z3l
+ .. {down}z3r
+ -- z5r
+ -- z5l
+ -- z2l{up}
+ .. cycle;
+
+ penlabels (1, 2, 3, 4, 5);
+
+ draw_foot (x5);
+fet_endchar;
+
+
+fet_beginchar ("Numeral 5", "five");
+ save alpha, beta, gamma, delta;
+ save inner_t, outer_t;
+ save pat;
+ path pat;
+
+ set_char_box (0, 27/40 height# * widen, 0, height#);
+
+ message "w:" & decimal w;
+ message "h:" & decimal h;
+
+ alpha = 0;
+ calc_kuulleke (w - thin, alpha);
+
+ z1 = (w / 2 + 1/8 thick, h);
+
+ penpos5 (thin, 0);
+ z5l = (x1l, h - 15/16 thick);
+
+ penpos6 (hair, 90 - 45);
+ z6 = z5r + 1/2 hair * dir (-45);
+
+ penpos7 (thin, 0);
+ z7l = (x1l, h / 2 + thin - hair);
+
+ penlabels (range 1 thru 7);
+
+ gamma = angle (length (z1r - z1), 2 kuulleke);
+
+ pat := z2r{dir (alpha - gamma)}
+ .. z4
+ .. {dir (alpha + gamma)}z3l
+ .. z3r{dir (-135)}
+ .. {left}z6r
+ .. {down}z6l
+ -- z7r{down}
+ .. {up}z7l
+ -- z2l{up}
+ .. cycle;
+
+ beta = 45;
+ delta = 180 + beta + 10;
+ z8r = (x7r, y7r - 1/16 thick + thin);
+ z8l = directionpoint dir (delta) of
+ subpath (6, 7) of pat;
+
+ % include intersection point to improve overlap removal
+ fill subpath (0, 6) of pat
+ .. z8l
+ .. subpath (7, length (pat)) of pat
+ .. cycle;
+
+ penpos9 (thin, 90);
+ y9 = 10/16 [y5, y7];
+ x9 = .36 [x8r, x10r];
+
+ penpos10 (thick, 0);
+ x10r = w + hair / 2;
+ y10r = 1/2 [y9r, y11r];
+
+ penpos11 (hair, -90);
+ y11r = 0;
+ x11r = .7 [0, x10l];
+
+ penlabels (range 8 thru 12);
+
+ inner_t = 1.0;
+ outer_t = .85;
+
+ fill z8r {dir (beta)}
+ .. z9r{right}
+ ..tension outer_t.. z10r{down}
+ .. number_flare_path (z11r, 180, -90, hair, flare, x11l,
+ .18 h, 0.06, 1.5, 1)
+ .. z11l{right}
+ ..tension inner_t.. z10l{up}
+ ..tension inner_t.. z9l{left}
+ .. z8l{dir (delta)}
+ -- cycle;
+fet_endchar;
+
+
+fet_beginchar ("Numeral 6", "six");
+ draw_six;
+fet_endchar;
+
+
+fet_beginchar ("Numeral 7", "seven");
+ save tolerance;
+ save alpha, beta, gamma, delta;
+ save bow;
+ save x_overshoot;
+
+ path bow;
+
+ set_char_box (0, 11/15 height# * widen - thin#, 0, height#);
+ overshoot_x = .75 thin;
+
+ message "w:" & decimal w;
+ message "h:" & decimal h;
+
+ alpha = -180;
+
+ penpos1 (3/2 thick, 180 + alpha);
+ penpos2 (hair, 180 + alpha - 45);
+ penpos3 (hair, 180 + alpha + 45);
+
+ z2 = z1l + (1/4 sqrt (2) * hair) * dir (alpha - 135);
+ z3 = z1r + (1/4 sqrt (2) * hair) * dir (alpha - 45);
+ z4 = z1 + kuulleke * dir (alpha - 90);
+
+ z1l = (thin, 0);
+
+ beta = 55;
+ penpos5 (thin, 90 + beta);
+ z5 = (w, h) + (1/2 sqrt (2) * thin) * dir (-135) + (overshoot_x, 0);
+
+ gamma = angle (length (z1r - z1), 2 kuulleke);
+ delta = 12;
+
+ pickup pencircle;
+
+ fill z3l{dir (alpha - gamma)}
+ .. z4
+ .. {dir (alpha + gamma)}z2r
+ .. z2l{dir (beta + delta)}
+ .. {dir (beta)}z5r
+ .. z5l{dir (180 + beta)}
+ .. {dir (delta - 90)}z3r
+ .. cycle;
+
+ penlabels (1, 2, 3, 4, 5);
+
+ alpha := -45 * widen;
+
+ penpos11 (1/2 thick, 90);
+ z11 = (3/2 thin, h - (thick + thin) / 2);
+
+ penpos13 (thin, 90 + beta);
+ z13 = z5;
+
+ penpos12 (thick, 90 + alpha);
+ x12 = 1/2 [x11, x13] - 1/4 thick;
+ y12 = h - 15/16 thick + thin * widen;
+
+ penpos14 (thin, 0);
+ z14l = (0, h - thin / 2);
+
+ penpos15 (thin, 0);
+ z15l = (0, h / 2 + thin / 2);
+
+ penpos16 (9/8 thick, 90);
+ z16r = (thin, y11r + 2/16 thick);
+
+ tolerance := epsilon;
+
+ % Find proper tension to exactly touch the x axis.
+ % Later on we directly use `bow'.
+ vardef f (expr t) =
+ bow := z11r{dir (beta)}
+ ..tension t.. {dir (alpha)}z12r;
+ ypart (directionpoint right of bow) > h
+ enddef;
+
+ % the return value of `solve' is stored in a dummy variable
+ t = solve f (0.8, 1.2);
+
+ fill bow
+ .. {dir (beta)}z13r
+ -- z13l{dir (180 + beta)}
+ .. {dir (180 + alpha)}z12l
+ .. {dir (180 + beta)}z11l
+ .. {down}z16l
+ -- z15r{down}
+ .. {up}z15l
+ -- z14l{up}
+ .. {down}z14r
+ -- z16r{down}
+ ..tension 1.5.. {dir (beta)}cycle;
+
+ penlabels (range 11 thru 16);
+fet_endchar;
+
+
+fet_beginchar ("Numeral 8", "eight");
+ save alpha, beta;
+
+ set_char_box (0, 11/15 height# * widen, 0, height#);
+
+ message "w:" & decimal w;
+ message "h:" & decimal h;
+
+ alpha = 60;
+ beta = alpha - 15;
+
+ z1 = (w / 2, h / 2 + thick / 8);
+
+ penpos2 (14/8 thin, 0);
+ z2 = (w / 3, h / 2 + thin);
+
+ penpos3 (3/2 thin, 0);
+ z3l = (0, h / 4 + thin / 2);
+
+ penpos4 (hair, 90);
+ z4l = (x1, 0);
+
+ penpos5 (thick, 90 + 90 + alpha);
+ z5 = z1 + w / 4 * dir (alpha - 90);
+
+ penpos6 (thick, 90 + 90 + alpha);
+ z6 = z1 + (w / 4 - thin / 2) * dir (90 + alpha);
+
+ penpos7 (hair, 90);
+ z7r = (x1 + .02 w, h);
+
+ penpos8 (3/2 thin, 0);
+ z8r = (w - thin / 2, 3/4 h + thin / 2);
+
+ penpos9 (13/8 thin, 0);
+ z9 = (2/3 w, h / 2);
+
+ penlabels (range 1 thru 9);
+
+ save t;
+ t = tense;
+
+ fill z2r{dir (180 + beta)}
+ .. z3r{down}
+ .. z4r{right}
+ .. z5r{dir (90 + alpha)}
+ -- z6r{dir (90 + alpha)}
+ ..tension t.. z7r{right}
+ .. z8r{down}
+ .. {dir (180 + beta)}z9r
+ -- z9l{dir (beta)}
+ .. z8l{up}
+ .. z7l{left}
+ .. {dir (alpha - 90)}z6l
+ -- z5l{dir (alpha - 90)}
+ ..tension t.. z4l{left}
+ .. z3l{up}
+ .. {dir (beta)}z2l
+ -- cycle;
+fet_endchar;
+
+
+fet_beginchar ("Numeral 9", "nine");
+ draw_six;
+% xy_mirror_char;
+
+ currentpicture := currentpicture scaled -1;
+ currentpicture := currentpicture shifted (w, h);
+fet_endchar;
+
+
+ligtable "3":
+ "3" kern 0.1 space#,
+ "0" kern 0.1 space#;
+
+ligtable "2":
+ "7" kern 0.15 space#;
projects / lilypond.git / blobdiff