--- /dev/null
+% Feta (not the Font-En-Tja) music font -- implement Clefs -*-Fundamental-*-
+% This file is part of LilyPond, the GNU music typesetter.
+%
+% Copyright (C) 1997--2011 Han-Wen Nienhuys <hanwen@xs4all.nl>,
+% Jan Nieuwenhuizen <janneke@gnu.org>,
+% Juergen Reuter <reuter@ipd.uka.de>
+%
+% LilyPond is free software: you can redistribute it and/or modify
+% it under the terms of the GNU General Public License as published by
+% the Free Software Foundation, either version 3 of the License, or
+% (at your option) any later version.
+%
+% LilyPond is distributed in the hope that it will be useful,
+% but WITHOUT ANY WARRANTY; without even the implied warranty of
+% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+% GNU General Public License for more details.
+%
+% You should have received a copy of the GNU General Public License
+% along with LilyPond. If not, see <http://www.gnu.org/licenses/>.
+
+
+fet_begingroup ("clefs");
+
+%
+% [Wanske] says the bulbs should be positioned about 1/4 right of the
+% `arrow'.
+%
+% TODO: The hair-curve at z6r looks a little awkward.
+%
+
+def draw_c_clef (expr reduction) =
+ save hair, norm, reduced_ss, right_edge;
+ save xoff;
+
+ reduced_ss# = staff_space# * reduction;
+ norm# := 2/3 reduced_ss#;
+ hair# := 0.06 reduced_ss# + 0.5 linethickness#;
+ right_edge# = 15/4 norm# + 2 hair#;
+ define_pixels (norm, reduced_ss, right_edge);
+ define_whole_vertical_blacker_pixels (hair);
+
+ set_char_box (0, right_edge#, 2 reduced_ss#, 2 reduced_ss#);
+
+ % make unreduced glyph fit exactly into five staff lines
+ if reduction = 1:
+ h := d := 2 staff_space_rounded;
+ fi;
+
+ % assure that the gap between the left and right stem
+ % has the same number of pixels as the thickness of the right
+ % stem
+ draw_block ((0, -d + feta_shift),
+ (3/4 norm + 1/2 hair, h));
+ draw_block ((3/4 norm + 1/2 hair + hround (3/2 hair), -d + feta_shift),
+ (3/4 norm + 1/2 hair + 2 hround (3/2 hair), h));
+
+ % assure symmetry
+ h := h - feta_shift;
+
+ pickup feta_fillpen;
+
+ xoff = 3/4 norm + 1/2 hair + 2 hround (3/2 hair);
+ z5l = (xoff - 3/4 hair, 0);
+ z5r = (x4, 0);
+
+ penpos1 (hair - pen_top - pen_bot, -90);
+ top z1l = (xoff + norm + hair, h);
+
+ penpos2 (hround (norm - 3/2 hair) - pen_lft - pen_rt, 180);
+ rt z2l = (w, h / 2);
+
+ penpos3 (hair - pen_top - pen_bot, 90);
+ bot z3l = ((right_edge - xoff) / 2 + xoff,
+ vround (.5 norm - 1.5 hair));
+
+ penpos4 (hair - pen_lft - pen_rt, 0);
+ top z4 = (xoff + 1/2 norm + 1/2 hair,
+ vfloor (reduced_ss - linethickness - .2 hair));
+
+ bot z6 = (xoff + 3/4 norm, vround (.5 norm - .5 hair));
+
+ save t;
+ t = 0.833;
+
+ save pat;
+ path pat;
+
+ pat = z5l{curl 1}
+ .. z4l{up}
+ .. z4r{down}
+ .. z3r{right}
+ ..tension t.. z2r{up}
+ ..tension t.. flare_path (top z1l, 180, 90,
+ hair, hfloor (norm - 1/2 hair), -1)
+ ..tension t.. z2l{down}
+ .. z3l{left}
+ .. z6
+ .. z5r{down};
+
+ filldraw pat shifted (0, feta_shift)
+ -- reverse pat yscaled -1 shifted (0, -feta_eps)
+ -- cycle;
+
+ penlabels (1, 2, 3, 4, 5, 6);
+
+ % ugh, should be bulb, not flare?
+
+ draw_staff (-2, 2, 0);
+enddef;
+
+
+fet_beginchar ("C clef", "C");
+ draw_c_clef (1.0);
+fet_endchar;
+
+
+fet_beginchar ("C clef", "C_change");
+ draw_c_clef (.8);
+fet_endchar;
+
+
+%
+% New bulb routine:
+%
+% Insert a brushed piece of the path, and draw the rest of the bulb
+% separately.
+%
+% The bulb has circular form. Neat merging of the bulb and brushed path
+% is done by playing with tension.
+%
+
+def new_bulb (expr start_point, start_angle,
+ outer_tangent_point,
+ end_point, end_angle,
+ big_radius, bulb_radius, flare,
+ direction, turning_dir) =
+begingroup;
+ save pat, before, after;
+ save center;
+ save u, v;
+ path pat, before, after;
+ pair center;
+
+ clearxy;
+
+ center = outer_tangent_point
+ + big_radius * dir (0);
+% + (big_radius - bulb_radius) * dir (-turning_dir * 90)
+
+ z1' = center + bulb_radius * dir (turning_dir * 180);
+ z2' = outer_tangent_point + flare * dir (0);
+ z3' = center + bulb_radius * dir (0);
+ z4' = center + bulb_radius * dir (turning_dir * 90);
+ z5' = center - 0.5 [big_radius, bulb_radius] * dir (turning_dir * 90);
+
+ labels (1', 2', 3', 4', 5');
+
+ before := z3'{dir (turning_dir * 90)}
+ .. z4'{-dir (0)}
+ ..tension 1.1.. z1'{-dir (turning_dir* 90)};
+ after := z2'{dir (turning_dir * 90)}
+ .. end_point{dir (end_angle)};
+ (u, v) = before intersectiontimes after;
+
+ pat := start_point{dir (start_angle)}
+ .. outer_tangent_point{dir (-turning_dir * 90)}
+ ..tension 1.02.. z5'{dir (0)}
+ .. subpath (0, u) of before
+ .. subpath (v, infinity) of after;
+
+ if direction = 0:
+ pat := reverse pat;
+ fi
+
+pat
+endgroup
+enddef;
+
+
+%
+% There is some variation in the shape of bass clefs.
+%
+% * In some clefs the size of the swoosh tip almost reaches the
+% bottom staff line; in some it crosses the 2nd line from the bottom
+% with a small overshoot.
+%
+% The most popular design is where the X part of the tip is aligned
+% with the left bulb boundary, and the Y part ends on the 2nd
+% staffline exactly. This is what we do.
+%
+% * The diameter of the bulb is the width of the open space.
+%
+% * The vertical center of the bulb can be on or slightly above the
+% staff line.
+%
+% * The vertical position of the dots can be symmetrical around the
+% staffline, centered in the staff space. The Baerenreiter SCS has
+% the bottom dot raised by approximately 0.1 staff space.
+%
+% * Uncarefully set music may have overshoots at the top. We have none.
+%
+% * It is not exactly clear where the vertical tangent at the right
+% of the swoosh should be.
+%
+
+def draw_bass_clef (expr exact_center, reduction) =
+ save reduced_ss, swoosh_width;
+ save right_thickness, right_offset, tip_protrude;
+ save dot_diam, bulb_y_offset, bulb_flare;
+ pair tip_protrude;
+
+ reduced_ss# = staff_space# * reduction;
+ 2.2 dot_diam# = reduction * (staff_space# - stafflinethickness#);
+ right_thickness# = 0.37 staff_space# + 1.2 linethickness#;
+ swoosh_width# = 2.1 reduced_ss#;
+ define_pixels (swoosh_width);
+ define_whole_pixels (reduced_ss);
+ define_whole_blacker_pixels (dot_diam, right_thickness);
+
+ right_offset = 0.05 staff_space;
+ bulb_y_offset := 0.075 staff_space;
+ bulb_flare := 2.5 linethickness;
+% tip_protrude := (-linethickness, -.2 staff_space);
+ tip_protrude := (0, 0);
+
+ set_char_box (-xpart exact_center,
+ xpart exact_center + swoosh_width# + 7/12 reduced_ss#,
+ -ypart exact_center + 2.5 reduced_ss#,
+ ypart exact_center + reduced_ss#);
+
+ y1 = bulb_y_offset;
+ x1 = 0;
+
+ x2 = .5 [x1, x3];
+ x2l = x2r = x2;
+
+ y2l := vround_pixels (reduced_ss# + 0.5 linethickness#);
+ y2l - y2r = linethickness;
+
+ x3l - x1 = swoosh_width;
+ x3l - x3r = right_thickness;
+
+ % optical correction: the top dot seems farther away if y3l = 0.
+ y3l = right_offset;
+
+ z4 = -(0, 2.0 reduced_ss) + tip_protrude;
+
+ penpos3 (whatever, 185);
+ penpos4 (linethickness, 135);
+
+ fill new_bulb (z2l, 180, z1, z2r, 0,
+ 0.45 reduced_ss, 0.4 reduced_ss,
+ bulb_flare, 1, 1)
+ .. z3r{down}
+ .. {curl 0}simple_serif (z4r, z4l, 90){curl 0}
+ .. z3l{up}
+ ..tension 0.9.. cycle;
+
+ pickup pencircle scaled dot_diam;
+
+ lft x5 = hround (x3l + 1/3 reduced_ss - dot_diam / 2);
+ bot y5 = vfloor (.5 reduced_ss - dot_diam / 2);
+ z6 = z5 yscaled -1;
+
+ % for symmetry
+ y5 := y5 + feta_shift;
+
+ drawdot z5;
+ drawdot z6;
+
+ penlabels (1, 2, 3, 4, 5, 6);
+
+ draw_staff (-3, 1, 0);
+enddef;
+
+
+fet_beginchar ("F clef ", "F");
+ draw_bass_clef ((0, 0), 1.0);
+fet_endchar;
+
+
+fet_beginchar ("F clef (reduced)", "F_change");
+ draw_bass_clef ((0, 0), 0.8);
+fet_endchar;
+
+
+
+%
+% Inspired by Baerenreiter
+%
+%
+% Beste lezers, kijk,
+%
+% Een bolletje hebben we bij toeval allemaal wel eens getekend, maar begint u
+% toch eenvoudig. Eerst een eenvoudig kruis of herstellingsteken
+% en via de dubbelslag naar een voorzichtig vlaggetje, en heb geduld!
+% Ikzelf heb bijvoorbeeld over mijn eerste gave G-sleutel
+% 35 kilobyte metafont, 12 patchlevels, 0 vriendinnen en 45 dagen gedaan
+%
+% -- vrij naar Van Kooten & De Bie
+%
+
+def debugfill = fill enddef;
+
+def draw_gclef (expr reduction) =
+ save reduced_ss, downstroke_dir, downstroke_angle, center;
+ save breapth_factor, inner_thick_end, thinness, thickness, thinnib;
+ save start_angle, inner_start_angle;
+ save upward_swoosh_angle, bot_angle;
+ save pat;
+ save corr_angle, corr, left_, right_, up_, down_, bot_angle_;
+ path pat;
+ pair downstroke_dir, center;
+ transform corr;
+ pair left_, right_, up_, down_;
+
+ reduced_ss# = staff_space# * reduction;
+ define_pixels (reduced_ss);
+
+ thinness = 0.095 staff_space + 0.75 linethickness;
+ downstroke_dir = unitvector (14, -75);
+ downstroke_angle = angle downstroke_dir;
+ bot_angle = -180; % downstroke_angle - 87
+
+ upward_swoosh_angle = 132;
+ start_angle = -97;
+
+ breapth_factor = 21/14;
+ inner_thick_end = 45;
+ inner_start_angle = downstroke_angle - 43;
+ thickness = .32 reduced_ss + 1.1 linethickness;
+
+ thinnib = thinness;
+
+ set_char_box (0, 1.71 * breapth_factor * reduced_ss#,
+ 2.6 * reduced_ss#, 5 * reduced_ss#);
+
+ center := (breapth_factor * reduced_ss, 0);
+
+ z1 = center + whatever * dir (inner_start_angle);
+ x1 = xpart center - .28 reduced_ss;
+ penpos1 (thinnib, inner_start_angle);
+
+ x2r = xpart center;
+ y2r = vround_pixels (reduced_ss# + .5 stafflinethickness#);
+ penpos2 (thickness, 90);
+
+ z3 = (z4 - center) rotated inner_thick_end + center;
+ penpos3 (thinnib, -90 + inner_thick_end);
+
+ x4 = xpart center - .1 reduced_ss;
+ y4r = -y2r + feta_shift;
+ penpos4 (thinnib, -90);
+
+ x5r = -breapth_factor * reduced_ss + xpart center;
+ y5r = .37 reduced_ss + ypart center;
+ penpos5 (thickness, upward_swoosh_angle);
+
+ z6 = center + whatever * downstroke_dir;
+ y6 = ypart center + 2 reduced_ss;
+ % penpos6 is computed later
+
+ z7l - z6 = whatever * (z5 - z6) ;
+ y7l = 3.5 reduced_ss;
+ penpos7 (thickness, upward_swoosh_angle);
+
+ x9 = .7 [x10, x7r];
+ top y9l = 5 reduced_ss;
+ penpos9 (1.45 thickness, -70);
+
+ x11 - x13r = 1.5 reduced_ss + 0.5 thinnib;
+ y11 = ypart center - 47/28 reduced_ss;
+ y12 = ypart center - 71/28 reduced_ss;
+ y13 = .48 [y12, y4r];
+ x12r = xpart (.45 [z13r, z11] + .75 reduced_ss * downstroke_dir);
+
+% z10 = center + whatever * dir (downstroke_angle - 1.5);
+ x10 = x6 - 2 thinnib;
+ y10 = ypart center + 3.5 reduced_ss;
+ y10l - y10r = 1.0 thickness;
+ z10r - z10l = .7 thinnib * dir (downstroke_angle + 90)
+ + whatever * downstroke_dir;
+ z10 = .5 [z10l, z10r];
+ z11 = center + whatever * downstroke_dir + (-0.05 reduced_ss, 0);
+
+ penpos11 (thinnib, start_angle + 90);
+ penpos12 (thinnib, bot_angle + 90);
+ penpos13 (thinnib + 0.14 staff_space, 180);
+
+ % this auxiliary point ensures good contour overlapping
+ z8 = .5 [z9l, z9r] + .25 ((z9r - z9l) rotated -90);
+
+ z20 = z9l - (0, .25 blot_diameter);
+ penpos20 (blot_diameter, 0);
+
+ pat := z10{down}
+ .. z6
+ ..tension 1.1.. z11{dir (start_angle)};
+
+ penpos6 (thinnib, angle (direction 1 of pat) + 90);
+
+ % two auxiliary points to simulate `draw' with `penstroke'
+ z10' = point 0.3 of pat;
+ penpos10' (1.3 thinnib, angle (direction 0.3 of pat) + 50);
+
+ z11' = point 1.5 of pat;
+ penpos11' (thinnib, angle (direction 1.5 of pat) + 90);
+
+ z21l = z20l;
+ z21r = z9r;
+
+ % after computing all points, we want to rotate the clef
+ % rotating the whole picture won't work due to the complexity
+ % of the path and metafont's memory limitations, so we transform
+ % each point and draw the clef thereafter
+ corr_angle := 1.5;
+ corr := identity rotatedabout (center, -corr_angle);
+
+ bot_angle_ := bot_angle + corr_angle;
+
+ left_ := left rotated corr_angle;
+ right_ := right rotated corr_angle;
+ up_ := up rotated corr_angle;
+ down_ := down rotated corr_angle;
+
+ % transform points; we transform every point and save it
+ % to a shifted index range: z1 -> z101, z2 -> z102, etc.
+ for n := 1 upto 21:
+ forsuffixes e := l,,r:
+ z[n+100]e = z[n]e transformed corr;
+ endfor
+ endfor
+
+ % transform helper points
+ for n := 10, 11:
+ forsuffixes e := l,,r:
+ z[n+100]'e = z[n]'e transformed corr;
+ endfor
+ endfor
+
+ pat := z121l
+ .. z110l{down}
+ .. z110'l;
+
+ fill z102l{right}
+ .. z103l
+ .. z104l{left_}
+ ..tension 1.07.. z105l{up_}% inside curve
+ .. z107l{up_}
+ ..tension 1.2.. z120r{curl 1}
+ .. {direction 0 of pat}z120l
+ -- z108
+ -- z109r % {dir (downstroke_angle + 0)}
+ ..tension 0.8.. z107r{down_}
+ .. z105r{down_}
+ .. z104r{right_}
+ .. z103r
+ .. z102r{left_}
+ ..tension .95.. z101r
+ -- simple_serif (z101r, z101l, 80)
+ -- z101l
+ ..tension 0.85.. cycle;
+
+ penstroke z121e
+ .. z110e{down_}
+ .. z110'e
+ .. z106e
+ .. z111'e
+ .. z111e{dir (-95 + corr_angle)}
+ .. z112e{dir (bot_angle_)};
+
+ fill new_bulb (z112r, bot_angle_, z113r, z112l, bot_angle_ + 180,
+ 0.45 reduced_ss, 0.38 reduced_ss,
+ thinnib + .05 staff_space, 1, -1)
+ -- cycle;
+
+ penlabels (range 101 thru 121);
+ penlabels (110', 111');
+
+ draw_staff (-1, 3, 0);
+enddef;
+
+
+fet_beginchar ("G clef", "G");
+ draw_gclef (1.0);
+fet_endchar;
+
+
+fet_beginchar ("G clef", "G_change");
+ draw_gclef (0.8);
+fet_endchar;
+
+
+%%%%
+%
+% PERCUSSION
+%
+
+%
+% The percussion clef extent is not coincident with its bbox, since
+% the percussion clef needs more space in front than a normal clef.
+%
+
+def draw_percussion_clef (expr reduction) =
+ save reduced_ss, razt;
+
+ reduced_ss# = staff_space# * reduction;
+ define_pixels (reduced_ss);
+
+ set_char_box (-.67 reduced_ss#, 2.0 reduced_ss#,
+ reduced_ss#, reduced_ss#);
+
+ razt := hround (0.45 reduced_ss);
+
+ d := d - feta_shift;
+
+ draw_block ((-b, -d), (-b + razt, h));
+ draw_block ((w - razt, -d), (w, h));
+
+ draw_staff (-3, 1, 1);
+enddef;
+
+
+fet_beginchar ("percussion clef", "percussion");
+ draw_percussion_clef (1.0);
+fet_endchar;
+
+
+fet_beginchar ("percussion clef (reduced)", "percussion_change");
+ draw_percussion_clef (.8);
+fet_endchar;
+
+
+def draw_tab_T (expr pos, siz, slant) =
+begingroup;
+ save vx, vy;
+ pair vx, vy;
+
+ clearxy;
+
+ vx = (xpart siz) * dir 0;
+ vy = (ypart siz) * dir 90;
+
+ penpos1 (.75 penh, 100);
+ z1 = z2 + (1/6 * vx - .15 * vy);
+ penpos2 (hround (.9 penw), 0);
+ x2l = hround xpart (pos + .75 vy);
+ y2l = ypart (pos + .75 vy);
+ penpos3 (penh, -100);
+ z3l = pos + .4 vx + vy;
+ penpos4 (penh, -90);
+ z4 = -.1 vy + .5 [z3, z5];
+ penpos5 (.8 penh, -30);
+ x5r = xpart (pos + siz);
+ y5l = ypart (pos + siz);
+
+ penpos10 (penw, 170);
+ z10 = pos + .55 vx + .9 vy;
+ penpos11 (.75 [penh, penw], 170);
+ z11 = z10 - .5 vy + .025 vx;
+ penpos12 (penh, 100);
+ z12l = (xpart .5 [z13, z11], ypart (pos - .025 * siz));
+ penpos13 (.75 penh, 60);
+ z13 = pos + .2 vx + .15 vy;
+
+ % penlabels (range 1 thru 13);
+
+ soft_penstroke (z1e
+ ..tension 1.1.. z2e
+ .. z3e{right}
+ ..tension 1.5.. z4e
+ ..z5e)
+ slanted slant shifted (slant * -ypart pos, 0);
+
+ soft_end_penstroke (z10e
+ ..tension 1.5.. z11e
+ .. z12e
+ ..tension 1.1.. z13e{(z13r - z13l) rotated 90})
+ slanted slant shifted (slant * -ypart pos, 0);
+endgroup;
+enddef;
+
+
+def draw_tab_A (expr pos, siz, slant) =
+begingroup;
+ save vx, vy, pat;
+ pair vx, vy;
+ path pat;
+
+ clearxy;
+
+ vx = (xpart siz) * dir 0;
+ vy = (ypart siz) * dir 90;
+
+ penpos1 (.75 penh, -110);
+ z1r = pos + .07 vy;
+ penpos2 (penh, -75);
+ z2r = (.5 [x1, x3], ypart pos);
+ penpos3 (.25 [penh, penw], -30);
+ z3 = (.45 [x2, x4], .15 [y2, y4]);
+ penpos4 (1 [penh, penw], 0);
+ z4 = pos + .5 vx + .975 vy;
+
+ penpos5 (1 [penh, penw], -180);
+ z5 = z4;
+ penpos6 (.2 [penh, penw], -150);
+ z6l = (.8 [x5l, x7l], .9 [y5l, y7l]);
+ penpos7 (penh,-90);
+ z7r = (.5 [x6, x8], ypart pos);
+ penpos8 (.75 penh, -70);
+ z8r = (xpart (pos + siz), y7r + .075 ypart (siz));
+
+ pat := z2
+ .. z3
+ .. z4;
+
+ penpos10 (penh, angle (direction 1.2 of pat) - 180);
+ z10 = point 1.2 of pat;
+ penpos11 (.9 penh, -90);
+ z11 = .4 [z10, z6] - 0.05 vy;
+ penpos12 (.75 penh, -75);
+ z12 = .3 [z11, z6] + 0.02 vy;
+
+ % penlabels (range 1 thru 12);
+
+ soft_penstroke (z1e{(z1r - z1l) rotated 90}
+ .. z2e
+ .. z3e
+ .. z4e)
+ slanted slant shifted (slant * -ypart pos, 0);
+
+ soft_end_penstroke (z5e
+ .. z6e
+ .. z7e
+ .. z8e{(z8r - z8l) rotated 90})
+ slanted slant shifted (slant * -ypart pos, 0);
+
+ soft_end_penstroke (z10e
+ .. z11e
+ .. z12e)
+ slanted slant shifted (slant * -ypart pos, 0);
+endgroup;
+enddef;
+
+
+def draw_tab_B (expr pos, siz, slant) =
+begingroup;
+ save vx, vy;
+ pair vx, vy;
+
+ clearxy;
+
+ vx = (xpart siz) * dir 0;
+ vy = (ypart siz) * dir 90;
+
+ penpos1 (.75 penh, 100);
+ z1 = z2 + (.15 * vx - .1 * vy);
+ penpos2 (hround (.9 penw), 0);
+ x2l = hround xpart (pos + .75 vy);
+ y2l = ypart (pos + .75 vy);
+ penpos3 (penh, -100);
+ z3l = pos + .4 vx + 1.05 vy;
+ penpos4 (.8 [penh, penw], -180);
+ z4 = (xpart (pos + .75 siz), .5 [y3, y5]);
+ penpos5 (.8 penh, 90);
+ z5 = (.5 [x10, x4], ypart (pos + .55 siz));
+
+ penpos6 (.8 penh, 270);
+ z6 = z5;
+ penpos7 (penw, 180);
+ z7l = (xpart (pos + siz), .5 [y6, y8]);
+ penpos8 (.8 penh, 45);
+ z8 = .5 [z12l, z11l] + .15 vx - .05 vy;
+
+ penpos10 (.75 [penh, penw], 170);
+ z10 = pos + .375 vx + vy;
+ penpos11 (.8 [penh, penw], 150);
+ z11 = z10 - .5 vy + .04 vx;
+ penpos12 (penh, 100);
+ z12l = (xpart .5 [z13, z11], ypart pos);
+ penpos13 (.75 penh, 60);
+ z13 = pos + .1 vx + .15 vy;
+
+ % penlabels (range 1 thru 13);
+
+ soft_penstroke (z1e
+ ..tension 1.1.. z2e
+ .. z3e
+ .. z4e
+ ..z5e {left})
+ slanted slant shifted (slant * -ypart pos, 0);
+
+ soft_end_penstroke (z6e{right}
+ .. z7e
+ .. z8e{(z8r - z8l) rotated 90})
+ slanted slant shifted (slant * -ypart pos, 0);
+
+ soft_end_penstroke (z10e
+ ..tension 1.5.. z11e
+ .. z12e
+ ..tension 1.1.. z13e{(z13r - z13l) rotated 90})
+ slanted slant shifted (slant * -ypart pos, 0);
+endgroup;
+enddef;
+
+
+def draw_tab_clef (expr reduction) =
+ save reduced_ss, letterheight, penw, penh;
+
+ reduced_ss# = staff_space# * reduction;
+ letterheight# = 1.8 reduced_ss#;
+ define_pixels (reduced_ss, letterheight);
+
+ set_char_box (-.2 reduced_ss#, 2.8 reduced_ss#,
+ 1.6 letterheight#, 1.6 letterheight#);
+
+ penw = .45 reduced_ss;
+ penh = .2 reduced_ss;
+
+ draw_tab_T ((-b + .15 reduced_ss, h - letterheight),
+ (2.1 reduced_ss, letterheight), 0.2);
+ draw_tab_A ((-b - .05 reduced_ss, -.5 letterheight +.15 reduced_ss),
+ (2.2 reduced_ss, letterheight), 0.4);
+ draw_tab_B ((-b + .025 reduced_ss, -d),
+ (2.1 reduced_ss, letterheight), 0.25);
+
+ draw_staff (-3, 2, 0.5);
+enddef;
+
+
+fet_beginchar ("tab clef", "tab");
+ draw_tab_clef (1.0);
+fet_endchar;
+
+
+fet_beginchar ("tab clef (reduced)", "tab_change");
+ draw_tab_clef (.8);
+fet_endchar;
+
+fet_endgroup ("clefs");
projects / lilypond.git / blobdiff