--- /dev/null
+% Feta (not the Font-En-Tja) music font -- Accidentals
+% This file is part of LilyPond, the GNU music typesetter.
+%
+% Copyright (C) 1997--2011 Han-Wen Nienhuys <hanwen@xs4all.nl>
+%
+%
+% LilyPond is free software: you can redistribute it and/or modify
+% it under the terms of the GNU General Public License as published by
+% the Free Software Foundation, either version 3 of the License, or
+% (at your option) any later version.
+%
+% LilyPond is distributed in the hope that it will be useful,
+% but WITHOUT ANY WARRANTY; without even the implied warranty of
+% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+% GNU General Public License for more details.
+%
+% You should have received a copy of the GNU General Public License
+% along with LilyPond. If not, see <http://www.gnu.org/licenses/>.
+
+
+%
+% also show in other configuration wrt staff lines.
+%
+def draw_shifted_too =
+if test > 0:
+ fet_beginchar ("shifted too", "");
+ set_char_box (0, 0, 0, 0);
+ currentpicture := remember_pic;
+
+ draw_staff (-2, 2, 0.5);
+ fet_endchar;
+fi;
+enddef;
+
+
+%
+% Accidentals from various sources, notably
+%
+% Baerenreiter edition of Schuberts `Auf dem Strom' (sharp, natural)
+% F Hofmeister edition of Muellers `Etueden fuer Horn' (double sharp, flat)
+%
+
+
+%
+% Naming for accidentals (including microtonal variants):
+%
+% SHARPBASE[.SLASHES.STEMS]
+% FLATBASE[.MODIFIER]
+%
+% Examples:
+%
+% sharp.slashslash.stem
+% mirroredflat.flat
+%
+%
+
+
+fet_begingroup ("accidentals");
+
+%
+% Draw an arrow
+%
+% * `stemslant' gives the direction of the stem's left boundary
+% (needed for brushed stems, equals "up" for straight stems)
+% * `extend' is used to make the stem longer or shorter (if negative);
+% different kinds of accidentals need different values here
+%
+def draw_arrow (expr attach, stemwidth, stemslant, extend, pointingdown) =
+begingroup;
+ save htip; % tip height
+ save wwing; % wing `radius'
+ save angle_wing_bot, angle_wing_top, angle_tip;
+ save upshift;
+ clearxy;
+
+ wwing := 0.26 stemwidth;
+ htip := staff_space * 0.85 + stafflinethickness - wwing;
+
+ % `flip' is used to reflect the arrow vertically
+ % if arrow points downward
+ transform flip;
+ if pointingdown:
+ flip = identity reflectedabout (origin, right);
+ else:
+ flip = identity;
+ fi;
+
+ z1 = attach shifted (-stemwidth / 2, 0);
+ upshift := max (0, wwing + 0.1 staff_space + extend);
+ z2 = z1 shifted (((unitvector stemslant)
+ scaled upshift) transformed flip);
+
+ z7 = attach shifted ((stemwidth/2),0);
+ z6 = z7 shifted (((unitvector (-xpart stemslant, ypart stemslant))
+ scaled upshift) transformed flip);
+ z2 - z3 = ( 0.38 staff_space, 0.05 htip) transformed flip;
+ z6 - z5 = (-0.38 staff_space, 0.05 htip) transformed flip;
+
+ z4 = attach shifted ((-0.2 stemwidth, upshift + htip)
+ transformed flip);
+ z4'= attach shifted (( 0.2 stemwidth, upshift + htip)
+ transformed flip);
+
+ % `angle_wing_bot' is the angle at which the arc
+ % from z2 to z3a enters z3a
+ % `angle_wing_top' is the angle at which the arc
+ % from z3b to z4 leaves z3b
+ % `angle_tip' is the angle at which the arc
+ % from z4 to z4' leaves z4
+ angle_wing_bot = 30;
+ angle_wing_top = 55;
+ angle_tip = 68;
+
+ z3a = z3 shifted ((((dir angle_wing_bot) rotated -90)
+ scaled wwing) transformed flip);
+ z3b = z3 shifted ((((dir angle_wing_top) rotated 90)
+ scaled wwing) transformed flip);
+
+ z5a = z5 shifted ((((dir (180 - angle_wing_bot)) rotated 90)
+ scaled wwing) transformed flip);
+ z5b = z5 shifted ((((dir (180 - angle_wing_top)) rotated -90)
+ scaled wwing) transformed flip);
+
+ % Draw the arrow
+ pickup pencircle scaled 1;
+ fill z1
+ -- z2{stemslant transformed flip}
+ .. {(-dir angle_wing_bot) transformed flip}z3a
+ .. z3b{(dir angle_wing_top) transformed flip}
+ .. z4{(dir angle_tip) transformed flip}
+ .. z4'{(dir (-angle_tip)) transformed flip}
+ .. {(dir (-angle_wing_top)) transformed flip}z5b
+ .. z5a{(-dir (-angle_wing_bot)) transformed flip}
+ .. z6{((-stemslant) reflectedabout (origin, up)) transformed flip}
+ -- z7
+ -- cycle;
+
+ labels (range 0 thru 7, 4', 3a, 3b, 5a, 5b);
+endgroup;
+enddef;
+
+save remember_pic;
+picture remember_pic;
+
+save sharp_beamheight;
+sharp_beamheight# := 0.3 staff_space# + stafflinethickness#;
+
+%
+% The beams of most sharps have horizontal endings (as if drawn with
+% a square pen). [Wanske] does not mention this, so we'll just ignore
+% this fact.
+%
+
+def draw_meta_sharp (expr width, offset) =
+ save beamwidth, beamslope;
+ save ne, nw_dist;
+ pair ne, nw_dist;
+
+ beamwidth := width;
+
+ define_whole_vertical_blacker_pixels (sharp_beamheight);
+
+ clearxy;
+
+ beamslope = sharp_beamheight / beamwidth;
+
+ pickup pencircle scaled 2 blot_diameter;
+
+ rt x2 - lft x1 = beamwidth;
+ z2 = z1 + whatever * (beamwidth, sharp_beamheight);
+ .5 [z1, z3] = (.5 w, offset);
+ x3 = x2;
+ top y2 - bot y3 = sharp_beamheight;
+ x4 = x1;
+ top y1 - bot y4 = sharp_beamheight;
+
+ ne = unitvector (z2 - z1);
+ nw_dist = (ne rotated 90) * blot_diameter;
+
+ fill lft z1{up}
+ ... (z1 + nw_dist){ne}
+ -- (z2 + nw_dist){ne}
+ ... rt z2{down}
+ -- rt z3{down}
+ ... (z3 - nw_dist){-ne}
+ -- (z4 - nw_dist){-ne}
+ ... lft z4{up}
+ -- cycle;
+
+ labels (1, 2, 3, 4);
+enddef;
+
+
+def draw_sharp(expr arrowup, arrowdown) =
+ save stem, stemx, stemwidth;
+ save outer_space, interbeam;
+ save stemlength, extendleft, extendright, height, depth;
+
+ stemwidth# := stafflinethickness# + .05 staff_space#;
+ define_whole_blacker_pixels (stemwidth);
+
+ interbeam := 1.05 staff_space_rounded;
+
+ stemlength# := 1.5 staff_space#;
+ define_pixels (stemlength);
+
+ height# = stemlength#;
+ depth# = stemlength#;
+ extendright# = 0;
+ extendleft# = 0;
+ if arrowup:
+ height# := height# + 1.2 staff_space#;
+ extendright# := extendright# + 1.5 stafflinethickness#;
+ fi;
+ if arrowdown:
+ depth# := depth# + 1.2 staff_space#;
+ extendleft# := extendleft# + 1.5 stafflinethickness#;
+ fi;
+ define_pixels (extendleft, extendright);
+ set_char_box (extendleft#, 1.1 staff_space#, depth#, height#);
+
+ stem := 7 / 16 * w;
+ stemx := hround stem;
+ outer_space := hround ((w - stemx - stemwidth) / 2);
+
+ w := 2 outer_space + stemx + stemwidth;
+ d := d - feta_space_shift;
+
+ draw_meta_sharp (w, -.5 interbeam);
+ draw_meta_sharp (w, -.5 interbeam + vround interbeam);
+
+ % expand the charbox so that it encloses the whole arrow;
+ % this must not happen earlier because some commands above
+ % still rely on the old width
+ w := w + extendright;
+
+ pickup pencircle scaled stemwidth;
+
+ lft x5 = lft x6 = outer_space;
+ lft x7 = lft x8 = outer_space + stemx;
+ bot y5 = -stemlength;
+ top y6 = vround (1.5 staff_space - stem * beamslope);
+ bot y7 = -top y6 + feta_space_shift;
+ top y8 = stemlength;
+
+ labels (5, 6, 7, 8);
+
+ draw_gridline (z5, z6, stemwidth);
+ draw_gridline (z7, z8, stemwidth);
+
+ if arrowup:
+ draw_arrow (z8, stemwidth, up,
+ stafflinethickness / 2 + stemwidth / 2, false);
+ fi;
+ if arrowdown:
+ draw_arrow (z5, stemwidth, up,
+ stafflinethickness / 2 + stemwidth / 2, true);
+ fi;
+
+ remember_pic := currentpicture;
+
+ draw_staff (-2, 2, 0);
+enddef;
+
+
+fet_beginchar ("Sharp", "sharp");
+ draw_sharp (false, false);
+fet_endchar;
+
+
+draw_shifted_too;
+
+
+fet_beginchar ("Arrowed Sharp (arrow up)", "sharp.arrowup");
+ draw_sharp (true, false);
+fet_endchar;
+
+
+draw_shifted_too;
+
+
+fet_beginchar ("Arrowed Sharp (arrow down)", "sharp.arrowdown");
+ draw_sharp (false, true);
+fet_endchar;
+
+
+draw_shifted_too;
+
+
+fet_beginchar ("Arrowed Sharp (arrows up and down)", "sharp.arrowboth");
+ draw_sharp (true, true);
+fet_endchar;
+
+
+draw_shifted_too;
+
+
+fet_beginchar ("1/2 Sharp", "sharp.slashslash.stem");
+ save stem, stemwidth;
+ save outer_space, interbeam;
+
+ stemwidth# := stafflinethickness# + .05 staff_space#;
+ define_whole_blacker_pixels (stemwidth);
+
+ interbeam := 1.05 staff_space_rounded;
+
+ set_char_box (0, 0.7 staff_space#,
+ 1.5 staff_space#, 1.5 staff_space#);
+
+ stem := 7 / 16 * w;
+ outer_space := hround ((w - stemwidth) / 2);
+
+ w := 2 outer_space + stemwidth;
+ d := d - feta_space_shift;
+
+ draw_meta_sharp (w, -.5 interbeam);
+ draw_meta_sharp (w, -.5 interbeam + vround interbeam);
+
+ pickup pencircle scaled stemwidth;
+
+ lft x5 = lft x6 = outer_space;
+ top y6 = vround (1.5 staff_space - .5 stem);
+ bot y5 = -top y6 + feta_space_shift;
+
+ labels (5, 6);
+
+ draw_gridline (z5, z6, stemwidth);
+
+ remember_pic := currentpicture;
+
+ draw_staff (-2, 2, 0);
+fet_endchar;
+
+
+draw_shifted_too;
+
+
+fet_beginchar ("Sharp (3 beams)", "sharp.slashslashslash.stemstem");
+ save stem, stemx, stemwidth;
+ save outer_space, interbeam;
+ save sharp_beamheight;
+
+ sharp_beamheight# := 0.22 staff_space# + stafflinethickness#;
+
+ stemwidth# := stafflinethickness# + .05 staff_space#;
+ define_whole_blacker_pixels (stemwidth);
+
+ interbeam := 1.2 staff_space_rounded;
+
+ set_char_box (0, 1.1 staff_space#,
+ 1.5 staff_space#, 1.5 staff_space#);
+
+ stem := 7 / 16 * w;
+ stemx := hround stem;
+ outer_space := hround ((w - stemx - stemwidth) / 2);
+
+ w := 2 outer_space + stemx + stemwidth;
+ d := d - feta_space_shift;
+
+ draw_meta_sharp (.88 w, -.5 interbeam);
+ draw_meta_sharp (.88 w, -.5 interbeam + vround interbeam);
+ sharp_beamheight# := 1/.88 sharp_beamheight#;
+ draw_meta_sharp (w, 0);
+
+ pickup pencircle scaled stemwidth;
+
+ lft x5 = lft x6 = outer_space;
+ lft x7 = lft x8 = outer_space + stemx;
+ bot y5 = -d;
+ top y6 = vround (1.5 staff_space - stem * beamslope);
+ bot y7 = -top y6 + feta_space_shift;
+ top y8 = h;
+
+ labels (5, 6, 7, 8);
+
+ draw_gridline (z5, z6, stemwidth);
+ draw_gridline (z7, z8, stemwidth);
+
+ remember_pic := currentpicture;
+
+ draw_staff (-2, 2, 0);
+fet_endchar;
+
+
+draw_shifted_too;
+
+
+fet_beginchar ("1/2 Sharp (3 beams)", "sharp.slashslashslash.stem");
+ save stem, stemx, stemwidth;
+ save outer_space, interbeam;
+ save sharp_beamheight;
+
+ sharp_beamheight# := 0.22 staff_space# + stafflinethickness#;
+
+ stemwidth# := stafflinethickness# + .05 staff_space#;
+ define_whole_blacker_pixels (stemwidth);
+
+ interbeam := 1.2 staff_space_rounded;
+
+ set_char_box (0, 0.95 staff_space#,
+ 1.3 staff_space#, 1.3 staff_space#);
+
+ stem := 7 / 16 * w;
+ outer_space := hround ((w - stemwidth) / 2);
+
+ w := 2 outer_space + stemwidth;
+ d := d - feta_space_shift;
+
+ draw_meta_sharp (.8 w, -.5 interbeam);
+ draw_meta_sharp (.8 w, -.5 interbeam + vround interbeam);
+ sharp_beamheight# := 1/.8 sharp_beamheight#;
+ draw_meta_sharp (w, 0);
+
+ pickup pencircle scaled stemwidth;
+
+ lft x5 = lft x6 = outer_space;
+ top y6 = vround (1.5 staff_space - .5 stem);
+ bot y5 = -top y6 + feta_space_shift;
+ labels (5, 6);
+
+ draw_gridline (z5, z6, stemwidth);
+
+ remember_pic := currentpicture;
+
+ draw_staff (-2, 2, 0);
+fet_endchar;
+
+
+draw_shifted_too;
+
+
+fet_beginchar ("3/4 Sharp", "sharp.slashslash.stemstemstem");
+ save stem, stemx, stemwidth;
+ save outer_space, interbeam;
+
+ stemwidth# := stafflinethickness# + .05 staff_space#;
+ define_whole_blacker_pixels (stemwidth);
+
+ interbeam := 1.05 staff_space_rounded;
+
+ set_char_box (0, 1.6 staff_space#,
+ 1.5 staff_space#, 1.5 staff_space#);
+
+ stem := 9 / 32 * w;
+ stemx := hround stem;
+ outer_space := hround ((w - 2 stemx - stemwidth) / 2);
+
+ w := 2 outer_space + 2 stemx + stemwidth;
+ d := d - feta_space_shift;
+
+ draw_meta_sharp (w, -.5 interbeam);
+ draw_meta_sharp (w, -.5 interbeam + vround interbeam);
+
+ pickup pencircle scaled stemwidth;
+
+ lft x5 = lft x6 = outer_space;
+ lft x7 = lft x8 = outer_space + stemx;
+ lft x9 = lft x10 = outer_space + 2 stemx;
+ bot y5 = -d;
+ top y6 = vround (1.5 staff_space - 2 stem * beamslope);
+ bot y9 = -top y6 + feta_space_shift;
+ top y10 = h;
+ y7 = .5 [y5, y9];
+ y8 = .5 [y6, y10];
+
+ labels (5, 6, 7, 8, 9, 10);
+
+ draw_gridline (z5, z6, stemwidth);
+ draw_gridline (z7, z8, stemwidth);
+ draw_gridline (z9, z10, stemwidth);
+
+ remember_pic := currentpicture;
+
+ draw_staff (-2, 2, 0);
+fet_endchar;
+
+
+draw_shifted_too;
+
+
+%
+% The stems of the natural are brushed (at least, in Barenreiter SCS)
+%
+
+def draw_natural (expr arrowup, arrowdown) =
+ save stemwidth, top_stem_thick;
+ save ne, pat_top, pat_bottom;
+ save depth, height, extendleft, extendright, stemlength;
+ save brush_scale_up, brush_scale_down;
+ pair ne;
+ path pat_top, pat_bottom;
+
+ top_stem_thick# = stafflinethickness# + .10 staff_space#;
+ stemwidth# = 0.09 staff_space# + .5 stafflinethickness#;
+ define_whole_blacker_pixels (top_stem_thick, stemwidth);
+
+ stemlength# = 1.5 staff_space#;
+ define_pixels (stemlength);
+
+ height# = stemlength#;
+ depth# = stemlength#;
+ extendleft# = 0;
+ extendright# = 0;
+ if arrowup:
+ extendleft# := 3 stafflinethickness#;
+ height# := height# + 1.2 staff_space#;
+ fi;
+ if arrowdown:
+ extendright# := 3.15 stafflinethickness#;
+ depth# := depth# + 1.2 staff_space#;
+ fi;
+ define_pixels (extendright);
+
+ set_char_box (extendleft#, 2/3 staff_space#, depth#, height#);
+
+ d := d - feta_space_shift;
+
+ pickup pencircle scaled stemwidth;
+
+ brush_scale_up := 1.0;
+ brush_scale_down := 1.0;
+ % to look nice, arrowed stems must be less brushed
+ if arrowup:
+ brush_scale_up := 0.85;
+ fi;
+ if arrowdown:
+ brush_scale_down := 0.85;
+ fi;
+
+ penpos1 (top_stem_thick, 0);
+ penpos3 (top_stem_thick, 0);
+ penpos2 (stemwidth, 0);
+ penpos4 (stemwidth, 0);
+ % z1' and z3' are needed for the arrowed accidentals
+ penpos1' (top_stem_thick * brush_scale_up, 0);
+ penpos3' (top_stem_thick * brush_scale_down, 0);
+
+ x2r = w;
+ x4l = 0;
+ x3 = x3' = x2;
+ x1 = x1' = x4;
+
+ y1 = y1' = stemlength;
+ y3 = y3' = -stemlength;
+ top y2 = vround (staff_space - 3/2 stafflinethickness);
+ y4 = -y2 + feta_space_shift;
+
+ pat_bottom := z4r{z4r - z1r}
+ .. bot z4
+ .. z4l{z1l - z4l};
+ fill simple_serif (z1'l, z1'r, -30)
+ -- pat_bottom
+ -- cycle;
+
+ pat_top := z2r{z2r - z3r}
+ .. top z2
+ .. z2l{z3l - z2l};
+ fill simple_serif (z3'l, z3'r, 30)
+ -- pat_top
+ -- cycle;
+
+ ne = (x2 - x4, stafflinethickness);
+
+ z11' = z3l + whatever * (z2l - z3l);
+ y11' = vround (.5 (staff_space - stafflinethickness));
+ z11 = z11' + whatever * ne;
+ x11 = x12;
+ z12 = directionpoint -ne of pat_top;
+ z13 = z12 + whatever * ne;
+ x13 = x1;
+ z14 = z11 + whatever * ne;
+ x14 = x1;
+
+ z21' = z4r + whatever * (z1r - z4r);
+ y21' = -y11' + feta_space_shift;
+ z21 = z21' + whatever * ne;
+ x21 = x22;
+ z22 = directionpoint -ne of pat_bottom;
+ z23 = z22 + whatever * ne;
+ x23 = x3;
+ z24 = z21 + whatever * ne;
+ x24 = x3;
+
+ fill z11
+ -- z12
+ -- z13
+ -- z14
+ -- cycle;
+ fill z21
+ -- z22
+ -- z23
+ -- z24
+ -- cycle;
+
+ penlabels (1, 1', 2, 3, 3', 4);
+ labels (11, 11', 12, 13, 14, 21, 21', 22, 23, 24);
+
+ if arrowup:
+ draw_arrow (z1, top_stem_thick * brush_scale_up,
+ z1'l - z4l, stafflinethickness / 2, false);
+ fi;
+ if arrowdown:
+ draw_arrow (z3, top_stem_thick * brush_scale_down,
+ z2r - z3'r, stafflinethickness / 2, true);
+ w := w + extendright;
+ fi;
+
+ remember_pic := currentpicture;
+
+ draw_staff (-2, 2, 0);
+enddef;
+
+
+fet_beginchar ("Natural", "natural");
+ draw_natural (false, false);
+fet_endchar;
+
+
+draw_shifted_too;
+
+
+fet_beginchar ("Arrowed Natural (arrow up)", "natural.arrowup");
+ draw_natural (true, false);
+fet_endchar;
+
+
+draw_shifted_too;
+
+
+fet_beginchar ("Arrowed Natural (arrow down)", "natural.arrowdown");
+ draw_natural (false, true);
+fet_endchar;
+
+
+draw_shifted_too;
+
+
+fet_beginchar ("Arrowed Natural (arrows up and down)", "natural.arrowboth");
+ draw_natural (true, true);
+fet_endchar;
+
+
+draw_shifted_too;
+
+
+%
+% Dedicated to my mom. (3/10/97)
+%
+% Mamma, ik hou van je; kom je alsjeblieft terug?
+% -- HW
+%
+%
+% TODO: remove crook_fatness
+% TODO: document, simplify!
+%
+
+def draw_meta_flat (expr xcenter, w, crook_fatness, arrowup, arrowdown) =
+ save crook_thinness;
+ save bottom_overshoot, bot_crook_dir;
+ save top_stem_thick, top_stem_thick_orig;
+ save bottom_stem_thick, hair, smaller_hole;
+ save top_crook_thinness;
+ save zwiep;
+ save center;
+ pair center, bot_crook_dir;
+ save clearing, clearing_orig;
+
+ clearxy;
+
+ % the stem shouldn't reach the top staff line.
+ %% TODO: should take from height.
+ %
+ % TODO: parameterize this
+ %
+ if w >= 0.75 staff_space:
+ smaller_hole = 0.35 stafflinethickness;
+ else:
+ smaller_hole = 0;
+ fi;
+ crook_thinness = .7 stafflinethickness + .06 staff_space;
+ top_crook_thinness = 1 stafflinethickness + .065 staff_space;
+ clearing = 1.7 stafflinethickness;
+ clearing_orig = clearing;
+ if arrowup:
+ clearing := 0.5 staff_space;
+ fi;
+ bottom_overshoot = stafflinethickness;
+
+ bottom_stem_thick# = 0.06 staff_space# + 0.6 stafflinethickness#;
+ top_stem_thick# = 0.1 staff_space# + 1.2 stafflinethickness#;
+ top_stem_thick_orig# = top_stem_thick#;
+ if arrowup:
+ % to look nice, arrowed stems should be less brushed
+ top_stem_thick# := top_stem_thick# * 0.8;
+ fi;
+ define_whole_blacker_pixels (bottom_stem_thick, top_stem_thick,
+ top_stem_thick_orig);
+
+ if odd (top_stem_thick - bottom_stem_thick):
+ top_stem_thick := top_stem_thick - 1;
+ fi;
+ if odd (top_stem_thick_orig - bottom_stem_thick):
+ top_stem_thick_orig := top_stem_thick_orig - 1;
+ fi;
+
+ center = (xcenter, 0);
+
+ x1l = hround (xcenter - .5 top_stem_thick);
+ y1 = vround (2 staff_space - clearing);
+ x2l = hround (xcenter - .5 bottom_stem_thick);
+ y2 = -.5 staff_space - .5 stafflinethickness;
+ % z16 and the `*_orig' variables are needed for arrowed accidentals
+ % because their inner part should be unchanged from plain ones but
+ % the points z3l, z3r, and z10 depend on values that are different
+ % for arrowed accidentals
+ x16l = hround (xcenter -.5 top_stem_thick_orig);
+ y16 = vround (2 staff_space - clearing_orig);
+
+ penpos1 (top_stem_thick, 0);
+ penpos16 (top_stem_thick_orig, 0);
+ penpos2 (bottom_stem_thick, 0);
+
+ y3l = vfloor ((staff_space - stafflinethickness) / 2);
+ z3l = whatever [z2r, z1r];
+ z3r = .3 [z2r,
+ (z16r shifted (0, clearing_orig - 1.7 stafflinethickness))]
+ + (smaller_hole, 0);
+ x3r := hceiling x3r;
+
+ % we insert z3l to get better conversion with mf2pt1
+ fill simple_serif (z1r, z1l, 30)
+ -- z2l
+ -- z2r
+ -- z3l
+ -- cycle;
+
+ z10 = whatever [z2r, z16r] + (smaller_hole, 0);
+ y10 = -1/10 staff_space;
+ x10 := hceiling x10;
+
+ x11 = xcenter + bottom_overshoot / 3;
+ y11 = -vround (.5 (staff_space + stafflinethickness)
+ + bottom_overshoot);
+
+ x2a = 0.2[x2r, x7];
+ y2a = 1.5[y2, y11];
+
+ penpos4 (whatever, 53);
+
+ y4l - y4r = top_crook_thinness;
+ y5r = .15 staff_space;
+ x5l = hround (w + xcenter);
+ y4 = staff_space / 2;
+ x4r = .45 [x5r, x3r];
+ y4l := vround y4l;
+
+ penpos5 (crook_fatness, -175);
+
+ bot_crook_dir = unitvector ((x5l, 0) - z11);
+ z8 = z11 + whatever * bot_crook_dir;
+ y8 = -staff_space / 2;
+
+ z7 = z8
+ + whatever * bot_crook_dir
+ + crook_thinness * (bot_crook_dir rotated 90);
+ x7 = .1 [x3r, x8];
+
+ unfill z3r{z3r - z10}
+ .. z4r{right}
+ .. z5r{down}
+ .. z7{-bot_crook_dir}
+ & z7
+ .. z10{z3r - z10}
+ -- cycle;
+
+ if arrowdown:
+ fill z2l{down}
+ .. z2a{up}
+ .. z8{bot_crook_dir}
+ .. z5l{up}
+ .. z4l{left}
+ .. z3l
+ -- cycle;
+ else:
+ fill z2l{down}
+ .. z11{right}
+ .. z8{bot_crook_dir}
+ .. z5l{up}
+ .. z4l{left}
+ .. z3l
+ -- cycle;
+ fi;
+
+ if arrowup:
+ draw_arrow (z1, top_stem_thick, z1l - z2l,
+ 0.5 stafflinethickness, false);
+ fi;
+ if arrowdown:
+ draw_arrow ((0.5 [x2l, x2a], y2), x2a - x2l, up,
+ staff_space / 2, true);
+ fi;
+enddef;
+
+
+def draw_arrowed_meta_flat (expr xcenter, width, crook_fatness,
+ arrowup, arrowdown) =
+ save depth, height, extendleft;
+
+ depth# = 0.6 staff_space#;
+ height# = 1.9 staff_space#;
+ extendleft# := 1.2 stafflinethickness#;
+ if arrowup:
+ extendleft# := 3.45 stafflinethickness#;
+ height# := height# + 0.8 staff_space#;
+ fi;
+ if arrowdown:
+ extendleft# := 3.45 stafflinethickness#;
+ depth# := depth# + 1.6 staff_space#;
+ fi;
+
+ set_char_box (extendleft#, width, depth#, height#);
+ draw_meta_flat(xcenter, w, crook_fatness, arrowup, arrowdown);
+enddef;
+
+%
+% unfortunately, 600dpi is not enough to show the brush of the stem.
+%
+
+fet_beginchar ("Flat", "flat");
+ draw_arrowed_meta_flat (0, 0.8 staff_space#, 0.31 staff_space,
+ false, false);
+ penlabels (range 0 thru 11);
+
+ remember_pic := currentpicture;
+
+ draw_staff (-2, 2, 0);
+fet_endchar;
+
+
+draw_shifted_too;
+
+
+fet_beginchar ("Arrowed Flat (arrow up)", "flat.arrowup");
+ draw_arrowed_meta_flat (0, 0.8 staff_space#, 0.31 staff_space,
+ true, false);
+ penlabels (range 0 thru 23);
+
+ remember_pic := currentpicture;
+
+ draw_staff (-2, 2, 0);
+fet_endchar;
+
+
+draw_shifted_too;
+
+
+fet_beginchar ("Arrowed Flat (arrow down)", "flat.arrowdown");
+ draw_arrowed_meta_flat (0, 0.8 staff_space#, 0.31 staff_space,
+ false, true);
+ penlabels (range 0 thru 23);
+
+ remember_pic := currentpicture;
+
+ draw_staff (-2, 2, 0);
+fet_endchar;
+
+
+draw_shifted_too;
+
+
+fet_beginchar ("Arrowed Flat (arrow up and down)", "flat.arrowboth");
+ draw_arrowed_meta_flat (0, 0.8 staff_space#, 0.31 staff_space,
+ true, true);
+ penlabels (range 0 thru 23);
+
+ remember_pic := currentpicture;
+
+ draw_staff (-2, 2, 0);
+fet_endchar;
+
+
+draw_shifted_too;
+
+
+fet_beginchar ("Flat (slashed)", "flat.slash");
+ set_char_box (.4 staff_space#, .8 staff_space#,
+ 0.6 staff_space#, 1.9 staff_space#);
+
+ draw_meta_flat (0, w, 0.31 staff_space, false, false);
+
+ clearxy;
+
+ save slope, slash_width;
+ slope = 0.5;
+ slash_width = w;
+
+ z11 = (0, h / 2);
+ z12 = z11 - (slash_width, slash_width * slope) / 2;
+ z13 = z11 + (slash_width, slash_width * slope) / 2;
+ penpos12 (1.5 stafflinethickness, angle (z13 - z12) - 90);
+ penpos13 (1.5 stafflinethickness, angle (z13 - z12) - 90);
+
+ z14 = z12 - .75 stafflinethickness * unitvector (z13 - z12);
+ z15 = z13 + .75 stafflinethickness * unitvector (z13 - z12);
+
+ fill z13r
+ .. z15
+ .. z13l
+ -- z12l
+ .. z14
+ .. z12r
+ -- z13r
+ .. cycle;
+
+ penlabels (12, 13);
+ labels (14, 15);
+
+ remember_pic := currentpicture;
+
+ draw_staff (-2, 2, 0);
+fet_endchar;
+
+
+fet_beginchar ("Flat (slashed twice)", "flat.slashslash");
+ set_char_box (.4 staff_space#, .8 staff_space#,
+ 0.6 staff_space#, 1.9 staff_space#);
+
+ draw_meta_flat (0, w, 0.31 staff_space, false, false);
+
+ clearxy;
+
+ save slope, slash_width;
+ slope = 0.5;
+ slash_width = w;
+
+ z11 = (0, 5/12 h);
+ z12 = z11 - (slash_width, slash_width * slope) / 2;
+ z13 = z11 + (slash_width, slash_width * slope) / 2;
+ penpos12 (1.5 stafflinethickness, angle (z13 - z12) - 90);
+ penpos13 (1.5 stafflinethickness, angle (z13 - z12) - 90);
+
+ z14 = z12 - .75 stafflinethickness * unitvector (z13 - z12);
+ z15 = z13 + .75 stafflinethickness * unitvector (z13 - z12);
+
+ fill z13r
+ .. z15
+ .. z13l
+ -- z12l
+ .. z14
+ .. z12r
+ -- z13r
+ .. cycle;
+
+ penlabels (12, 13);
+ labels (14, 15);
+
+ z21 = (0, 2/3 h);
+ z22 = z21 - (slash_width, slash_width * slope) / 2;
+ z23 = z21 + (slash_width, slash_width * slope) / 2;
+ penpos22 (1.5 stafflinethickness, angle (z23 - z22) - 90);
+ penpos23 (1.5 stafflinethickness, angle (z23 - z22) - 90);
+
+ z24 = z22 - .75 stafflinethickness * unitvector (z23 - z22);
+ z25 = z23 + .75 stafflinethickness * unitvector (z23 - z22);
+
+ fill z23r
+ .. z25
+ .. z23l
+ -- z22l
+ .. z24
+ .. z22r
+ -- z23r
+ .. cycle;
+
+ penlabels (22, 23);
+ labels (24, 25);
+
+ remember_pic := currentpicture;
+
+ draw_staff (-2, 2, 0);
+fet_endchar;
+
+
+fet_beginchar ("Flatflat (mirrored)", "mirroredflat.flat");
+ set_char_box (0, 1.6 staff_space#,
+ 0.6 staff_space#, 1.9 staff_space#);
+
+ % This is a modified version of `draw_meta_flat'.
+
+ save crook_thinness, crook_fatness;
+ save bottom_overshoot, bot_crook_dir;
+ save top_stem_thick, bottom_stem_thick, hair, smaller_hole;
+ save top_crook_thinness;
+ save zwiep;
+ save center;
+ pair center, bot_crook_dir;
+ save clearing, wid;
+ save pat;
+ path pat;
+
+ clearxy;
+
+ wid = w / 2;
+
+ % the stem shouldn't reach the top staff line.
+ %% TODO: should take from height.
+ %
+ % TODO: parameterize this
+ %
+ if wid >= 0.75 staff_space:
+ smaller_hole = 0.35 stafflinethickness;
+ else:
+ smaller_hole = 0;
+ fi;
+ clearing = 1.7 stafflinethickness;
+ crook_thinness = .7 stafflinethickness + .06 staff_space;
+ crook_fatness = 0.31 staff_space;
+ top_crook_thinness = 1 stafflinethickness + .065 staff_space;
+ bottom_overshoot = stafflinethickness;
+
+ bottom_stem_thick# = 0.06 staff_space# + 0.6 stafflinethickness#;
+ top_stem_thick# = 0.1 staff_space# + 1.2 stafflinethickness#;
+ define_whole_blacker_pixels (bottom_stem_thick, top_stem_thick);
+
+ if odd (top_stem_thick - bottom_stem_thick):
+ top_stem_thick := top_stem_thick - 1;
+ fi;
+
+ center = (0, 0);
+
+ x1l = hround (-.5 top_stem_thick);
+ y1 = vround (2 staff_space - clearing);
+ x2l = hround (-.5 bottom_stem_thick);
+ y2 = -.5 staff_space - .5 stafflinethickness;
+
+ penpos1 (top_stem_thick, 0);
+ penpos2 (bottom_stem_thick, 0);
+
+ y3l = vfloor ((staff_space - stafflinethickness) / 2);
+ z3l = whatever [z2r, z1r];
+ z3r = .3 [z2r, z1r] + (smaller_hole, 0);
+ x3r := hceiling x3r;
+
+ z10 = whatever [z2r, z1r] + (smaller_hole, 0);
+ y10 = -1/10 staff_space;
+ x10 := hceiling x10;
+
+ x11 = bottom_overshoot / 3;
+ y11 = -vround (.5 (staff_space + stafflinethickness)
+ + bottom_overshoot);
+
+ penpos4 (whatever, 53);
+
+ y4l - y4r = top_crook_thinness;
+ y5r = .15 staff_space;
+ x5l = hround (wid);
+ y4 = staff_space / 2;
+ x4r = .45 [x5r, x3r];
+ y4l := vround y4l;
+
+ penpos5 (crook_fatness, -175);
+
+ bot_crook_dir = unitvector ((x5l, 0) - z11);
+ z8 = z11 + whatever * bot_crook_dir;
+ y8 = -staff_space / 2;
+
+ z7 = z8
+ + whatever * bot_crook_dir
+ + crook_thinness * (bot_crook_dir rotated 90);
+ x7 = .1 [x3r, x8];
+
+ pat := z3r{z3r - z10}
+ .. z4r{right}
+ .. z5r{down}
+ .. z7{-bot_crook_dir}
+ & z7
+ .. z10{z3r - z10}
+ -- cycle;
+ unfill pat;
+ unfill pat xscaled -1;
+
+ pat := z11{right}
+ .. z8{bot_crook_dir}
+ .. z5l{up}
+ .. z4l{left}
+ .. z3l;
+ fill pat
+ -- simple_serif (z1r, z1l, 30)
+ -- reverse pat xscaled -1 shifted (-feta_eps, 0)
+ -- cycle;
+
+ currentpicture := currentpicture shifted (w/2, 0);
+
+ remember_pic := currentpicture;
+
+ draw_staff (-2, 2, 0);
+fet_endchar;
+
+
+draw_shifted_too;
+
+
+fet_beginchar ("Semi flat", "mirroredflat");
+ set_char_box (1.2 stafflinethickness#, .8 staff_space#,
+ 0.6 staff_space#, 1.9 staff_space#);
+
+ draw_meta_flat (0, w, 0.31 staff_space, false, false);
+ currentpicture := currentpicture xscaled -1 shifted (w - b, 0);
+fet_endchar;
+
+
+fet_beginchar ("Semi flat", "mirroredflat.backslash");
+ set_char_box (.4 staff_space#, .8 staff_space#,
+ 0.6 staff_space#, 1.9 staff_space#);
+
+ draw_meta_flat (0, w, 0.31 staff_space, false, false);
+
+ clearxy;
+
+ save slope, slash_width;
+ slope = 0.5;
+ slash_width = w;
+
+ z11 = (0, h / 2);
+ z12 = z11 - (slash_width, slash_width * slope) / 2;
+ z13 = z11 + (slash_width, slash_width * slope) / 2;
+ penpos12 (1.5 stafflinethickness, angle (z13 - z12) - 90);
+ penpos13 (1.5 stafflinethickness, angle (z13 - z12) - 90);
+
+ z14 = z12 - .75 stafflinethickness * unitvector (z13 - z12);
+ z15 = z13 + .75 stafflinethickness * unitvector (z13 - z12);
+
+ fill z13r
+ .. z15
+ .. z13l
+ -- z12l
+ .. z14
+ .. z12r
+ -- z13r
+ .. cycle;
+
+ currentpicture := currentpicture xscaled -1 shifted (w - b, 0);
+
+ labels (1, 2, 3);
+fet_endchar;
+
+
+fet_beginchar ("Double Flat", "flatflat");
+ save left_wid, overlap, right_wid;
+
+ left_wid = .7;
+ right_wid = .8;
+ overlap = .05;
+
+ set_char_box (1.2 stafflinethickness#,
+ (left_wid + right_wid - overlap) * staff_space#,
+ .6 staff_space#, 1.9 staff_space#);
+ draw_meta_flat (0, left_wid * staff_space, 1/3 staff_space,
+ false, false);
+ draw_meta_flat (hround ((left_wid - overlap) * staff_space),
+ right_wid * staff_space, 1/3 staff_space,
+ false, false);
+fet_endchar;
+
+
+fet_beginchar ("3/4 Flat", "flatflat.slash");
+ save left_wid, overlap, right_wid;
+
+ left_wid = .7;
+ right_wid = .8;
+ overlap = .05;
+
+ set_char_box (1.2 stafflinethickness#,
+ (left_wid + right_wid - overlap) * staff_space#,
+ .6 staff_space#, 1.9 staff_space#);
+ draw_meta_flat (0, left_wid * staff_space, 1/3 staff_space,
+ false, false);
+ draw_meta_flat (hround ((left_wid - overlap) * staff_space),
+ right_wid * staff_space, 1/3 staff_space,
+ false, false);
+
+ %% maybe we should clip part of the stems?
+ %% or make the 1st flat smaller?
+ %% or reverse it?
+ pickup pencircle scaled 2 stafflinethickness;
+
+ z12 = round (-.25 w - b, .55 staff_space) + feta_offset;
+ z13 = round (.75 w, 1.45 staff_space) + feta_offset;
+ penpos12 (2 stafflinethickness, angle (z13 - z12) - 90);
+ penpos13 (2 stafflinethickness, angle (z13 - z12) - 90);
+
+ z14 = z12 - stafflinethickness * unitvector (z13 - z12);
+ z15 = z13 + stafflinethickness * unitvector (z13 - z12);
+
+ fill z13r
+ .. z15
+ .. z13l
+ -- z12l
+ .. z14
+ .. z12r
+ -- z13r
+ .. cycle;
+
+ penlabels (12, 13);
+ labels (14, 15);
+
+ remember_pic := currentpicture;
+
+ draw_staff (-2, 2, 0);
+fet_endchar;
+
+
+draw_shifted_too;
+
+
+fet_beginchar ("Double Sharp", "doublesharp");
+ save klaverblad, klaversteel;
+ save pat;
+ path pat;
+
+ klaversteel = 1/15 staff_space;
+ klaverblad = .4 staff_space - .5 stafflinethickness;
+
+ set_char_box (0, staff_space#, .5 staff_space#, .5 staff_space#);
+
+ z1 = (klaversteel, 0);
+ z2 = (w / 2 - klaverblad / 10, h - klaverblad);
+ z3 = (w / 2, h);
+ z4 = z2 reflectedabout ((0, 0), (1, 1));
+ z5 = z1 reflectedabout ((0, 0), (1, 1));
+
+ labels (1, 2, 3, 4, 5);
+
+ pickup pencircle scaled blot_diameter;
+
+ x2 := hfloor (rt x2) - blot_diameter / 2;
+ x3 := hfloor (rt x3) - blot_diameter / 2;
+ y3 := vfloor (top y3) - blot_diameter / 2;
+ y4 := vfloor (top y4) - blot_diameter / 2;
+
+ pat = (rt z1){dir45}
+ .. {right}(bot z2)
+ .. rt z2
+ -- rt z3{z3 - z2}
+ .. top z3{z4 - z3}
+ -- top z4{z4 - z3}
+ .. (lft z4){down}
+ .. {dir 225}(top z5);
+ pat := pat
+ -- reverse pat xscaled -1 shifted (-feta_eps, 0);
+
+ % assure symmetry -- it's more important to center the glyph on the
+ % staff line than centering it between staff lines, so we use
+ % feta_shift, not feta_space_shift.
+ h := h + feta_shift;
+
+ fill pat shifted (0, feta_shift)
+ -- reverse pat yscaled -1 shifted (0, -feta_eps)
+ -- cycle;
+
+ % ugh
+ currentpicture := currentpicture shifted (hround (w / 2), 0);
+
+ remember_pic := currentpicture;
+
+ draw_staff (-2, 2, 0);
+fet_endchar;
+
+
+draw_shifted_too;
+
+
+def draw_paren =
+ save leftindent;
+
+ leftindent := .2 staff_space;
+
+ set_char_box (0, .5 staff_space# + stafflinethickness#,
+ staff_space#, staff_space#);
+
+ d := d - feta_shift;
+
+ z1 = (leftindent, h);
+ z2 = (w - stafflinethickness, .5 (h - d));
+ z3 = (leftindent, -d);
+
+ penpos1 (stafflinethickness, 35);
+ penpos2 (.1 staff_space + stafflinethickness, 0);
+ penpos3 (stafflinethickness, -35);
+
+ fill z2l{down}
+ .. simple_serif (z3l, z3r, 90)
+ .. z2r{up}
+ .. simple_serif (z1r, z1l, 90)
+ .. z2l{down}
+ -- cycle;
+enddef;
+
+
+fet_beginchar ("Right Parenthesis", "rightparen");
+ draw_paren;
+ penlabels (1, 2, 3);
+
+ remember_pic := currentpicture;
+
+ draw_staff (-2, 2, 0);
+fet_endchar;
+
+
+draw_shifted_too;
+
+
+fet_beginchar ("Left Parenthesis", "leftparen");
+ draw_paren;
+
+ currentpicture := currentpicture xscaled -1;
+
+ set_char_box (charwd, charbp, chardp, charht);
+fet_endchar;
+
+fet_endgroup ("accidentals");
projects / lilypond.git / blobdiff