-
-
INSTALL - compiling and installing GNU LilyPond
***********************************************
-Obtaining
-=========
- You can get the latest version of LilyPond at
-ftp://ftp.cs.uu.nl/pub/GNU/LilyPond/
-(ftp://ftp.cs.uu.nl/pub/GNU/LilyPond/).
+1 Compilation
+ 1.1 Overview of compiling
+ 1.2 Requirements
+ 1.2.1 Requirements for running LilyPond
+ 1.2.2 Requirements for compiling LilyPond
+ Fedora
+ Linux Mint
+ OpenSUSE
+ Ubuntu
+ Other
+ 1.2.3 Requirements for building documentation
+ 1.3 Getting the source code
+ 1.4 Configuring ‘make’
+ 1.4.1 Running ‘./autogen.sh’
+ 1.4.2 Running ‘../configure’
+ Configuration options
+ Checking build dependencies
+ Configuring target directories
+ 1.5 Compiling LilyPond
+ 1.5.1 Using ‘make’
+ 1.5.2 Saving time with the ‘-j’ option
+ 1.5.3 Compiling for multiple platforms
+ 1.5.4 Useful ‘make’ variables
+ 1.6 Post-compilation options
+ 1.6.1 Installing LilyPond from a local build
+ 1.6.2 Generating documentation
+ Documentation editor’s edit/compile cycle
+ Building documentation
+ Building a single document
+ Saving time with ‘CPU_COUNT’
+ AJAX search
+ Installing documentation
+ Building documentation without compiling
+ 1.6.3 Testing LilyPond binary
+ 1.7 Problems
+ Compiling on MacOS X
+ Solaris
+ FreeBSD
+ International fonts
+ Using lilypond python libraries
+ 1.8 Concurrent stable and development versions
+ 1.9 Build system
+1 Compilation
+*************
+
+1.1 Overview of compiling
+=========================
+
+Compiling LilyPond from source is an involved process, and is only
+recommended for developers and packagers. Typical program users are
+instead encouraged to obtain the program from a package manager (on
+Unix) or by downloading a precompiled binary configured for a specific
+operating system. Pre-compiled binaries are available on the *note
+(lilypond-web)Download:: page.
- _If you upgrade by patching do remember to rerun autoconf after
-applying the patch_.
+ Compiling LilyPond from source is necessary if you want to build,
+install, or test your own version of the program.
- If you do not want to download the entire archive for each version,
-the safest method for upgrading is to use `xdelta', see
-`ftp://ftp.xcf.berkeley.edu/pub/xdelta/'.
+ A successful compile can also be used to generate and install the
+documentation, incorporating any changes you may have made. However, a
+successful compile is not a requirement for generating the
+documentation. The documentation can be built using a Git repository in
+conjunction with a locally installed copy of the program. For more
+information, see *note Building documentation without compiling::.
- The following command produces `lilypond-1.3.122.tar.gz' from
-`lilypond-1.3.121' identical (up to compression dates) to the .122 on
-the FTP site.
- xdelta patch lilypond-1.3.121-1.3.122.xd lilypond-1.3.121.tar.gz
+ Attempts to compile LilyPond natively on Windows have been
+unsuccessful, though a workaround is available (see *note
+(lilypond-contributor)LilyDev::).
-Prerequisites
-=============
+1.2 Requirements
+================
- For compilation you need:
+1.2.1 Requirements for running LilyPond
+---------------------------------------
- * A GNU system: GNU LilyPond is known to run on these GNU systems:
- Linux (PPC, intel), FreeBSD, AIX, NeXTStep, IRIX, Digital Unix
- and Solaris.
+This section contains the list of separate software packages that are
+required to run LilyPond.
- * Lots of disk space: LilyPond takes between 30 and 100 mb to
- compile if you use debugging information. If you are short on
- disk-space run configure with `--disable-debugging'.
+ • DejaVu fonts (http://www.dejavu-fonts.org/) These are normally
+ installed by default.
- * Although we recommend to use Unix, LilyPond is known to run on
- Windows NT/95/98 as well. See Section Windows NT/95,es.
+ • FontConfig (http://www.fontconfig.org/) Use version 2.4.0 or newer.
- * A reasonable C++ compiler: EGCS 1.1, GCC 2.95.2 or newer. Check
- out `ftp://ftp.gnu.org/gnu/gcc/'.
+ • Freetype (http://www.freetype.org/) Use version 2.1.10 or newer.
- * Python 1.5, Check out `ftp://ftp.python.org' or
- `ftp://ftp.cwi.nl/pub/python'.
+ • Ghostscript (http://www.ghostscript.com) Use version 8.60 or newer.
- * GUILE 1.3.4 or newer, check out
- http://www.gnu.org/software/guile/guile.html
- (http://www.gnu.org/software/guile/guile.html). Version 1.4 is
- recommended for better performance.
+ • Guile (http://www.gnu.org/software/guile/guile.html) Use version
+ 1.8.8. Version 2.x of Guile is not currently supported.
- * GNU Make. Check out ftp://ftp.gnu.org/gnu/make/
- (ftp://ftp.gnu.org/gnu/make/).
+ • Pango (http://www.pango.org/) User version 1.12 or newer.
- * Flex (version 2.5.4a or newer). Check out
- ftp://ftp.gnu.org/pub/gnu/non-gnu/flex/
- (ftp://ftp.gnu.org/pub/gnu/non-gnu/flex/).
+ • Python (http://www.python.org) Use version 2.4 or newer.
- * Bison (version 1.25 or newer). Check out
- ftp://ftp.gnu.org/gnu/bison/ (ftp://ftp.gnu.org/gnu/bison/).
+ • International fonts. For example:
- * TeX. If you want LilyPond to use kpathsea support (recommended),
- make sure you have tetex 1.0 or newer (1.0.6 is known to work).
- You may need to install a tetex-devel or tetex-dev package too.
+ Fedora:
- * Texinfo (version 4.0 or newer). Check out
- ftp://ftp.gnu.org/gnu/texinfo/ (ftp://ftp.gnu.org/gnu/texinfo/).
- Most documentation is in texinfo.
+ fonts-arabic
+ fonts-hebrew
+ fonts-ja
+ fonts-xorg-truetype
+ taipeifonts
+ ttfonts-ja
+ ttfonts-zh_CN
- * The geometry package for LaTeX is needed to use ly2dvi. Available
- at
- ftp://ftp.ctan.org/tex-archive/macros/latex/contrib/supported/geometry
- (ftp://ftp.ctan.org/tex-archive/macros/latex/contrib/supported/geometry)
- or at mirror site ftp://ftp.dante.de (ftp://ftp.dante.de)
+ Debian based distributions:
- * MetaPost, needed for generating PostScript fonts. Please note that
- tetex-0.4pl8 (included with Red Hat 5.x) does not include
- `mfplain.mp', which is needed for producing the scalable font
- files.
+ emacs-intl-fonts
+ fonts-ipafont-gothic
+ fonts-ipafont-mincho
+ xfonts-bolkhov-75dpi
+ xfonts-cronyx-75dpi
+ xfonts-cronyx-100dpi
+ xfonts-intl-.*
- If you do not want to use PostScript output, edit `mf/GNUmakefile',
- removing the line saying `PFA_FILES='
+ These are normally installed by default and are required only to
+ create music with international text or lyrics.
- * kpathsea, a library for searching (TeX) files. `kpathsea' is
- usually included with your installation of TeX.
+1.2.2 Requirements for compiling LilyPond
+-----------------------------------------
+This section contains instructions on how to quickly and easily get all
+the software packages required to build LilyPond.
-Running
-=======
+ Most of the more popular Linux distributions only require a few
+simple commands to download all the software needed. For others, there
+is an explicit list of all the individual packages (as well as where to
+get them from) for those that are not already included in your
+distributions’ own repositories.
- GNU LilyPond does use a lot of resources. For operation you need the
-following software
+Fedora
+......
- * TeX.
+The following instructions were tested on ‘Fedora’ versions 22 & 23 and
+will download all the software required to both compile LilyPond and
+build the documentation.
- * A PostScript printer and/or viewer (such as Ghostscript) is
- strongly recommended. Xdvi will show all embedded PostScript
- too if you have Ghostscript installed.
+ • Download and install all the LilyPond build-dependencies
+ (approximately 700MB);
- * GUILE 1.3.4, or newer. Check out
- http://www.gnu.org/software/guile/
- (http://www.gnu.org/programs/guile.html)
+ sudo dnf builddep lilypond --nogpgcheck
- For running LilyPond successfully you have to help TeX and MetaFont
-find various files. The recommended way of doing so is adjusting the
-environment variables in the start-up scripts of your shell. Appropriate
-Csh and sh scripts are left in `buildscripts/out/lilypond-profile' and
-`buildscripts/out/lilypond-login' after compilation.
+ • Download and install additional ‘build’ tools required for
+ compiling;
- The empty path component represents TeX and MetaFont's default search
-paths. Scripts with the proper paths for the bourne and C-shell
-respectively are generated in `buildscripts/out/lilypond-profile' and
-`buildscripts/out/lilypond-login' during compilation.
+ sudo dnf install autoconf gcc-c++
- LilyPond is a big and slow program. A fast CPU and plenty of RAM is
-recommended for comfortable use.
+ • Download ‘texi2html 1.82’ directly from:
+ <http://download.savannah.gnu.org/releases/texi2html/texi2html-1.82.tar.gz>;
-Website
-=======
+ ‘texi2html’ is only required if you intend to compile LilyPond’s
+ own documentation (e.g. to help with any document writing). The
+ version available in the Fedora repositories is too new and will
+ not work. Extract the files into an appropriate location and then
+ run the commands;
- The website is the most convenient form to use for reading the
-documentation on-line documentation. It is made by entering
+ ./configure
+ make
+ sudo make install
- make htmldoc
- This does require a functioning LilyPond. The binary doesn't have to
-be installed.
+ This should install ‘texi2html 1.82’ into ‘/usr/local/bin’, which
+ will normally take priority over ‘/usr/bin’ where the later,
+ pre-installed versions gets put. Now verify that your operating
+ system is able to see the correct version of ‘texi2html’.
- If you want to auto-generate Lily's website, you'll need some
-additional conversion tools.
+ texi2html --version
- * xpmtoppm (from the netpbm package: the Portable Bitmap Utilities)
- (For Red Hat Linux users: it is included within the
- package libgr-progs). The original is at
- ftp://ftp.x.org/contrib/utilities/netpbm-1mar1994.p1.tar.gz
- (ftp://ftp.x.org/contrib/utilities/netpbm-1mar1994.p1.tar.gz)
+ • Although not ‘required’ to compile LilyPond, if you intend to
+ contribute to LilyPond (codebase or help improve the documentation)
+ then it is recommended that you also need to install ‘git’.
- * pnmtopng (also in libgr-progs for Red Hat). The original is at
- ftp://swrinde.nde.swri.edu/pub/png/applications/pnmtopng-2.37.2.tar.gz
- (ftp://swrinde.nde.swri.edu/pub/png/applications/pnmtopng-2.37.2.tar.gz).i
+ sudo dnf install git
- The version of `pnmtopng' that is distributed with Red Hat 5.1 and
- 5.2 contains a bug: pnmtopng is dynamically linked to the wrong
- version of libpng.
+ Also see *note (lilypond-contributor)Starting with Git::.
- * Bibtex2html (http://www.lri.fr/~filliatr/ftp/bibtex2html/), or
- Bib2html (http://www.uni-koblenz.de/ag-ki/ftp/bib2html/).
- Bibtex2html is available in debian, while bib2html is in some rpm
- based distributions. Bib2html, in turn depends on man2html for
- proper installation. man2html can be had from
- http://askdonald.ask.uni-karlsruhe.de/hppd/hpux/Networking/WWW/Man2html-1.05
- (http://askdonald.ask.uni-karlsruhe.de/hppd/hpux/Networking/WWW/Man2html-1.05).
+ • To use the ‘lily-git.tcl’ GUI;
- The website will build without bib converter utility, but you will
- not see our hypertextified bibliography.
+ sudo dnf install tk
+ See *note (lilypond-contributor)lily-git::.
-Configuring and compiling
-=========================
+ Note: By default, when building LilyPond’s documentation,
+ ‘pdfTeX’ is be used. However ligatures (fi, fl, ff etc.) may
+ not be printed in the PDF output. In this case XeTeX can be
+ used instead. Download and install the ‘texlive-xetex’
+ package.
- to install GNU LilyPond, simply type:
- gunzip -c lilypond-x.y.z | tar xf -
- cd lilypond-x.y.z
- ./configure # fill in your standard prefix with --prefix
- make
- make install
+ sudo dnf install texlive-xetex
- This will install a number of files, something close to:
+ The scripts used to build the LilyPond documentation will use
+ ‘XeTex’ instead of ‘pdfTex’ to generate the PDF documents if
+ it is available. No additional configuration is required.
- /usr/local/man/man1/midi2ly.1
- /usr/local/man/man1/abc2ly.1
- /usr/local/man/man1/etf2ly.1
- /usr/local/man/man1/convert-ly.1
- /usr/local/man/man1/lilypond-book.1
- /usr/local/man/man1/lilypond.1
- /usr/local/bin/lilypond
- /usr/local/bin/midi2ly
- /usr/local/bin/convert-ly
- /usr/local/bin/lilypond-book
- /usr/local/bin/abc2ly
- /usr/local/bin/pmx2ly
- /usr/local/bin/musedata2ly
- /usr/local/bin/etf2ly
- /usr/local/share/lilypond/*
- /usr/local/share/locale/{....}/LC_MESSAGES/lilypond.mo
+Linux Mint
+..........
- The above assumes that you are root and have the GNU development
-tools, and your make is GNU make. If this is not the case, you can
-adjust your environment variables to your taste:
+The following instructions were tested on ‘Linux Mint 17.1’ and ‘LMDE -
+Betsy’ and will download all the software required to both compile
+LilyPond and build the documentation..
+ • Enable the _sources_ repository;
- export CPPFLAGS="-I /home/me/my_include -DWEIRD_FOOBAR"
- ./configure
+ 1. Using the _Software Sources_ GUI (located under
+ _Administration_).
- `CPPFLAGS' are the preprocessor flags.
+ 2. Select _Official Repositories_.
- The configure script is Cygnus configure, and it will accept
-`--help'. If you are not root, you will probably have to make it with a
-different `--prefix' option. Our favourite location is
+ 3. Check the _Enable source code repositories_ box under the
+ _Source Code_ section.
+ 4. Click the _Update the cache_ button and when it has completed,
+ close the _Software Sources_ GUI.
- ./configure --prefix=$HOME/usr
+ • Download and install all the LilyPond build-dependencies
+ (approximately 200MB);
- In this case, you will have to set up MFINPUTS, and TEXINPUTS
-accordingly.
+ sudo apt-get build-dep lilypond
- Since GNU LilyPond currently is beta, you are advised to also use
+ • Download and install additional ‘build’ tools required for
+ compiling;
+ sudo apt-get install autoconf fonts-texgyre texlive-lang-cyrillic
- --enable-debugging
- --enable-checking
+ • Although not ‘required’ to compile LilyPond, if you intend to
+ contribute to LilyPond (codebase or help improve the documentation)
+ then it is recommended that you also need to install ‘git’.
- Options to configure include:
+ sudo apt-get install git
-``--enable-printing''
- Enable debugging print routines (lilypond `-D' option)
+ Also see *note (lilypond-contributor)Starting with Git::.
-``--enable-optimise''
- Set maximum optimisation: compile with `-O2'. This can be
- unreliable on some compiler/platform combinations (eg, DEC Alpha
- and PPC)
+ • To use the ‘lily-git.tcl’ GUI;
-``--enable-profiling''
- Compile with support for profiling.
+ sudo apt-get install tk
-``--enable-config''
- Output to a different configuration file. Needed for
- multi-platform builds
+ Also see *note (lilypond-contributor)lily-git::.
- All options are documented in the `configure' help The option
-`--enable-optimise' is recommended for Real Life usage.
+ Note: By default, when building LilyPond’s documentation,
+ ‘pdfTeX’ is be used. However ligatures (fi, fl, ff etc.) may
+ not be printed in the PDF output. In this case XeTeX can be
+ used instead. Download and install the ‘texlive-xetex’
+ package.
- If you do
+ sudo apt-get install texlive-xetex
+ The scripts used to build the LilyPond documentation will use
+ ‘XeTex’ instead of ‘pdfTex’ to generate the PDF documents if
+ it is available. No additional configuration is required.
- make all
+OpenSUSE
+........
- everything will be compiled, but nothing will be installed. The
-resulting binaries can be found in the subdirectories `out/' (which
-contain all files generated during compilation).
+The following instructions were tested on ‘OpenSUSE 13.2’ and will
+download all the software required to both compile LilyPond and build
+the documentation.
-Configuring for multiple platforms
-==================================
+ • Add the _sources_ repository;
- If you want to compile LilyPond with different configuration
-settings, then, you can use the `--enable-config' option. Example:
-suppose I want to build with and without profiling. Then I'd use the
-following for the normal build,
+ sudo zypper addrepo -f \
+ "http://download.opensuse.org/source/distribution/13.2/repo/oss/" sources
+ • Download and install all the LilyPond build-dependencies
+ (approximately 680MB);
- ./configure --prefix=~ --disable-optimise --enable-checking
- make
- make install
+ sudo zypper source-install lilypond
- and for the profiling version, I specify a different configuration.
+ • Download and install additional ‘build’ tools required for
+ compiling;
+ sudo zypper install make
- ./configure --prefix=~ --enable-profiling --enable-config=prof --enable-optimise --disable-checking
- make config=prof
- make config=prof install
+ • Although not ‘required’ to compile LilyPond, if you intend to
+ contribute to LilyPond (codebase or help improve the documentation)
+ then it is recommended that you also need to install ‘git’.
-Installing
-==========
+ sudo zypper install git
- if you have done a successful `make', then a simple
+ Also see *note (lilypond-contributor)Starting with Git::.
+ • To use the ‘lily-git.tcl’ GUI;
- make install
+ sudo zypper install tk
- should do the trick.
+ Also see *note (lilypond-contributor)lily-git::.
- If you are doing an upgrade, please remember to remove obsolete
-`.pk' and `.tfm' files of the fonts. A script has been provided to do
-the work for you, see `bin/clean-fonts.sh'.
+ Note: By default, when building LilyPond’s documentation,
+ ‘pdfTeX’ is be used. However ligatures (fi, fl, ff etc.) may
+ not be printed in the PDF output. In this case XeTeX can be
+ used instead. Download and install the ‘texlive-xetex’
+ package.
-Red Hat Linux
-=============
+ sudo zypper install texlive-xetex
- Red Hat Linux users can compile an RPM. A spec file is in
-`make/out/lilypond.spec'; it is distributed along with the sources.
+ The scripts used to build the LilyPond documentation will use
+ ‘XeTex’ instead of ‘pdfTex’ to generate the PDF documents if
+ it is available. No additional configuration is required.
- You can make the rpm by issuing
+Ubuntu
+......
- rpm -tb lilypond-x.y.z.tar.gz
- rpm -i /usr/src/redhat/RPMS/i386/lilypond-x.y.z
+The following commands were tested on Ubuntu versions ‘14.04 LTS’,
+‘14.10’ and ‘15.04’ and will download all the software required to both
+compile LilyPond and build the documentation.
- Precompiled Red Hat 7.0 i386 RPMS are available from
-`ftp://ftp.cs.uu.nl/pub/GNU/LilyPond/RedHat/'.
+ • Download and install all the LilyPond build-dependencies
+ (approximately 200MB);
- For compilation on a Red Hat system you need these packages, in
-addition to the those needed for running:
- * glibc-devel
+ sudo apt-get build-dep lilypond
- * libstdc++-devel
+ • Download and install additional ‘build’ tools required for
+ compiling;
- * guile-devel
+ sudo apt-get install autoconf fonts-texgyre texlive-lang-cyrillic
- * flex
+ • Although not ‘required’ to compile LilyPond, if you intend to
+ contribute to LilyPond (codebase or help improve the documentation)
+ then it is recommended that you also need to install ‘git’.
- * bison
+ sudo apt-get install git
- * texinfo
+ Also see *note (lilypond-contributor)Starting with Git::.
- * tetex-devel
+ • To use the ‘lily-git.tcl’ GUI;
-Debian GNU/Linux
-================
+ sudo apt-get install tk
+
+ Also see *note (lilypond-contributor)lily-git::.
+
+ Note: By default, when building LilyPond’s documentation,
+ ‘pdfTeX’ is be used. However ligatures (fi, fl, ff etc.) may
+ not be printed in the PDF output. In this case XeTeX can be
+ used instead. Download and install the ‘texlive-xetex’
+ package.
+
+ sudo apt-get install texlive-xetex
+
+ The scripts used to build the LilyPond documentation will use
+ ‘XeTex’ instead of ‘pdfTex’ to generate the PDF documents if
+ it is available. No additional configuration is required.
+
+Other
+.....
+
+The following individual software packages are required just to compile
+LilyPond.
+
+ • GNU Autoconf (http://www.gnu.org/software/autoconf)
+
+ • GNU Bison (http://www.gnu.org/software/bison/)
+
+ Use version ‘2.0’ or newer.
+
+ • GNU Compiler Collection (http://gcc.gnu.org/)
+
+ Use version ‘3.4’ or newer (‘4.x’ recommended).
+
+ • Flex (http://flex.sourceforge.net/)
+
+ • FontForge (http://fontforge.sf.net/)
+
+ Use version ‘20060125’ or newer (we recommend using at least
+ ‘20100501’); it must also be compiled with the ‘--enable-double’
+ switch, else this can lead to inaccurate intersection calculations
+ which end up with poorly-rendered glyphs in the output.
+
+ • GNU gettext (http://www.gnu.org/software/gettext/gettext.html)
+
+ Use version ‘0.17’ or newer.
+
+ • GNU Make (http://www.gnu.org/software/make/)
+
+ Use version ‘3.78’ or newer.
+
+ • MetaFont (http://metafont.tutorial.free.fr/)
+
+ The ‘mf-nowin’, ‘mf’, ‘mfw’ or ‘mfont’ binaries are usually
+ packaged along with TeX (http://www.latex-project.org/ftp.html).
+
+ • MetaPost (http://cm.bell-labs.com/who/hobby/MetaPost.html)
+
+ The ‘mpost’ binary is also usually packaged with TeX
+ (http://www.latex-project.org/ftp.html).
+
+ • Perl (http://www.perl.org/)
+
+ • Texinfo (http://www.gnu.org/software/texinfo/)
+
+ Use version ‘4.11’ or newer.
+
+ • Type 1 utilities (http://www.lcdf.org/~eddietwo/type/#t1utils)
+
+ Use version ‘1.33’ or newer.
+
+ • Cyrillic fonts (https://www.ctan.org/pkg/cyrillic?lang=en)
+
+ Often packaged in repositories as ‘texlive-lang-cyrillic’.
+
+ • TeX Gyre ‘OTF’ font packages. As of LilyPond version ‘2.19.26’,
+ the previous default serif, san serif and monospace fonts now use
+ Tex Gyre’s _Schola_, _Heros_ and _Cursor_ fonts respectively. Also
+ See *note (lilypond-notation)Fonts::.
+
+ Some distributions do not always provide ‘OTF’ font files in the
+ Tex Gyre packages from their repositories. Use the command
+ ‘fc-list | grep texgyre’ to list the fonts available to your system
+ and check that the appropriate ‘*.otf’ files are reported. If they
+ are not then download and manually extract the ‘OTF’ files to
+ either your local ‘~/.fonts/’ directory or use the ‘configure’
+ command and the ‘--with-texgyre-dir=/path_to_otf_files/’ option.
+
+ The following font families are required:
+
+ Schola (http://www.gust.org.pl/projects/e-foundry/tex-gyre/schola),
+ Heros (http://www.gust.org.pl/projects/e-foundry/tex-gyre/heros)
+ and Cursor
+ (http://www.gust.org.pl/projects/e-foundry/tex-gyre/cursor).
+
+1.2.3 Requirements for building documentation
+---------------------------------------------
+
+The entire set of documentation for the most current build of LilyPond
+is available online at
+<http://lilypond.org/doc/v2.19/Documentation/web/development>, but you
+can also build them locally from the source code. This process requires
+some additional tools and packages.
+
+ Note: If the instructions for one of the previously listed
+ Linux in the previous section (*note
+ (lilypond-contributor)Requirements for compiling LilyPond::)
+ have been used, then the following can be ignored as the
+ software should already be installed.
+
+ • Everything listed in *note Requirements for compiling LilyPond::
+
+ • ImageMagick (http://www.imagemagick.org/)
+
+ • Netpbm (http://netpbm.sourceforge.net/)
+
+ • gzip (http://gzip.org/)
+
+ • rsync (http://rsync.samba.org/)
+
+ • Texi2HTML (http://www.nongnu.org/texi2html/)
+
+ Use version ‘1.82’. Later versions will not work.
+
+ Download ‘texi2html 1.82’ directly from:
+ <http://download.savannah.gnu.org/releases/texi2html/texi2html-1.82.tar.gz>;
+
+ Extract the files into an appropriate location and then run the
+ commands;
+
+ ./configure
+ make
+ sudo make install
+
+ Now verify that your operating system is able to see the correct
+ version of ‘texi2html’.
+
+ texi2html --version
+
+ • Fonts required to build the documentation in addition to those
+ required to run LilyPond:
+
+ gsfonts
+ fonts-linuxlibertine
+ fonts-liberation
+ fonts-dejavu
+ fonts-freefont-otf
+ ttf-bitstream-vera
+ texlive-fonts-recommended
+ ttf-xfree86-nonfree
+
+ Note: By default, when building LilyPond’s documentation,
+ ‘pdfTeX’ is be used. However ligatures (fi, fl, ff etc.) may
+ not be printed in the PDF output. In this case XeTeX can be
+ used instead. Download and install the ‘texlive-xetex’
+ package. The scripts used to build the LilyPond documentation
+ will use ‘XeTex’ instead of ‘pdfTex’ to generate the PDF
+ documents if it is available. No additional configuration is
+ required.
+
+1.3 Getting the source code
+===========================
+
+Downloading the Git repository
+------------------------------
+
+In general, developers compile LilyPond from within a local Git
+repository. Setting up a local Git repository is explained in *note
+(lilypond-contributor)Starting with Git::.
+
+Downloading a source tarball
+----------------------------
+
+Packagers are encouraged to use source tarballs for compiling.
+
+ The tarball for the latest stable release is available on the *note
+(lilypond-web)Source:: page.
+
+The latest source code snapshot
+(http://git.savannah.gnu.org/gitweb/?p=lilypond.git;a=snapshot) is also
+available as a tarball from the GNU Savannah Git server.
+
+All tagged releases (including legacy stable versions and the most
+recent development release) are available here:
+
+ <http://download.linuxaudio.org/lilypond/source/>
+
+ Download the tarball to your ‘~/src/’ directory, or some other
+appropriate place.
+
+ Note: Be careful where you unpack the tarball! Any
+ subdirectories of the current folder named ‘lilypond/’ or
+ ‘lilypond-X.Y.Z/’ (where X.Y.Z is the release number) will be
+ overwritten if there is a name clash with the tarball.
+
+ Unpack the tarball with this command:
+
+ tar -xzf lilypond-X.Y.Z.tar.gz
+
+ This creates a subdirectory within the current directory called
+‘lilypond-X.Y.Z/’. Once unpacked, the source files occupy about 40 MB
+of disk space.
+
+ Windows users wanting to look at the source code may have to download
+and install the free-software 7zip archiver (http://www.7-zip.org) to
+extract the tarball.
+
+1.4 Configuring ‘make’
+======================
+
+1.4.1 Running ‘./autogen.sh’
+----------------------------
+
+After you unpack the tarball (or download the Git repository), the
+contents of your top source directory should be similar to the current
+source tree listed at
+<http://git.sv.gnu.org/gitweb/?p=lilypond.git;a=tree>.
+
+ Next, you need to create the generated files; enter the following
+command from your top source directory:
+
+ ./autogen.sh --noconfigure
+
+ This will generate a number of files and directories to aid
+configuration, such as ‘configure’, ‘README.txt’, etc.
+
+ Next, create the build directory with:
+
+ mkdir build/
+ cd build/
+
+ We heavily recommend building lilypond inside a separate directory
+with this method.
+
+1.4.2 Running ‘../configure’
+----------------------------
+
+Configuration options
+.....................
+
+ Note: make sure that you are in the ‘build/’ subdirectory of
+ your source tree.
+
+ The ‘../configure’ command (generated by ‘./autogen.sh’) provides
+many options for configuring ‘make’. To see them all, run:
+
+ ../configure --help
+
+Checking build dependencies
+...........................
+
+ Note: make sure that you are in the ‘build/’ subdirectory of
+ your source tree.
+
+ When ‘../configure’ is run without any arguments, it will check to
+make sure your system has everything required for compilation:
+
+ ../configure
+
+ If any build dependency is missing, ‘../configure’ will return with:
+
+ ERROR: Please install required programs: FOO
+
+ The following message is issued if you are missing programs that are
+only needed for building the documentation:
+
+ WARNING: Please consider installing optional programs: BAR
+
+ If you intend to build the documentation locally, you will need to
+install or update these programs accordingly.
+
+ Note: ‘../configure’ may fail to issue warnings for certain
+ documentation build requirements that are not met. If you
+ experience problems when building the documentation, you may
+ need to do a manual check of *note Requirements for building
+ documentation::.
+
+Configuring target directories
+..............................
+
+ Note: make sure that you are in the ‘build/’ subdirectory of
+ your source tree.
+
+ If you intend to use your local build to install a local copy of the
+program, you will probably want to configure the installation directory.
+Here are the relevant lines taken from the output of
+‘../configure --help’:
+
+ By default, ‘‘make install’’ will install all the files in
+ ‘/usr/local/bin’, ‘/usr/local/lib’ etc. You can specify an
+ installation prefix other than ‘/usr/local’ using ‘‘--prefix’’, for
+ instance ‘‘--prefix=$HOME’’.
+
+ A typical installation prefix is ‘$HOME/usr’:
+
+ ../configure --prefix=$HOME/usr
+
+ Note that if you plan to install a local build on a system where you
+do not have root privileges, you will need to do something like this
+anyway—‘make install’ will only succeed if the installation prefix
+points to a directory where you have write permission (such as your home
+directory). The installation directory will be automatically created if
+necessary.
+
+ The location of the ‘lilypond’ command installed by this process will
+be ‘PREFIX/bin/lilypond’; you may want to add ‘PREFIX/bin/’ to your
+‘$PATH’ if it is not already included.
+
+ It is also possible to specify separate installation directories for
+different types of program files. See the full output of
+‘../configure --help’ for more information.
+
+ If you encounter any problems, please see *note Problems::.
+
+1.5 Compiling LilyPond
+======================
+
+1.5.1 Using ‘make’
+------------------
+
+ Note: make sure that you are in the ‘build/’ subdirectory of
+ your source tree.
+
+ LilyPond is compiled with the ‘make’ command. Assuming ‘make’ is
+configured properly, you can simply run:
+
+ make
- A Debian package is also available. You may install it easily by
-using apt-get as root:
+ ‘make’ is short for ‘make all’. To view a list of ‘make’ targets,
+run:
- apt-get install lilypond1.3
+ make help
- Alternatively, visit
+ TODO: Describe what ‘make’ actually does.
- * http://packages.debian.org/lilypond
- (http://packages.debian.org/lilypond)
- * http://ftp.debian.org/debian/pool/main/l/lilypond1.3/
- (http://ftp.debian.org/debian/pool/main/l/lilypond1.3/) for latest
- package uploaded to Debian unstable;
+See also
+........
- * http://people.debian.org/~foka/lilypond/
- (http://people.debian.org/~foka/lilypond/) for latest
- semi-unofficial build of LilyPond 1.3.121 for Debian 2.2r2
- (potato) users. The official stable Debian 2.2r2 is stuck with
- the old LilyPond-1.3.24.
+ *note Generating documentation:: provides more info on the ‘make’
+targets used to build the LilyPond documentation.
- You may contact Anthony Fok <foka@debian.org> for more information.
+1.5.2 Saving time with the ‘-j’ option
+--------------------------------------
- The build scripts are in the subdirectory `debian/'; you can make
-the .deb by doing, for example:
+If your system has multiple CPUs, you can speed up compilation by adding
+‘-jX’ to the ‘make’ command, where ‘X’ is one more than the number of
+cores you have. For example, a typical Core2Duo machine would use:
- $ su - root
- # dpkg --purge lilypond lilypond1.3
- # exit
- $ tar xzf lilypond-1.3.122.tar.gz
- $ cd lilypond-1.3.122
- $ dch -p -v 1.3.122-0.local.1 "Local build."
- $ debuild
- $ su - root
- # dpkg -i ../lilypond1.3_1.3.122*.deb
- # exit
- $
+ make -j3
- For compilation on a Debian GNU/Linux system you need these packages,
-in addition to the those needed for running:
+ If you get errors using the ‘-j’ option, and ‘make’ succeeds without
+it, try lowering the ‘X’ value.
- * g++, cpp, libc6-dev, libstdc++<your-libstdc++-version-here>-dev
+ Because multiple jobs run in parallel when ‘-j’ is used, it can be
+difficult to determine the source of an error when one occurs. In that
+case, running ‘make’ without the ‘-j’ is advised.
- * libguile<your-libguile-version-here>-dev
+1.5.3 Compiling for multiple platforms
+--------------------------------------
- * make, m4, flex, bison
+If you want to build multiple versions of LilyPond with different
+configuration settings, you can use the ‘--enable-config=CONF’ option of
+‘configure’. You should use ‘make conf=CONF’ to generate the output in
+‘out-CONF’. For example, suppose you want to build with and without
+profiling, then use the following for the normal build
- * gettext
+ ./configure --prefix=$HOME/usr/ --enable-checking
+ make
- * groff, texinfo, bibtex2html (not in 2.2r2)
+ and for the profiling version, specify a different configuration
- * tetex-base, tetex-bin, tetex-extra, libkpathsea-dev or tetex-dev
+ ./configure --prefix=$HOME/usr/ --enable-profiling \
+ --enable-config=prof --disable-checking
+ make conf=prof
- * dpkg-dev, debhelper, fakeroot
+ If you wish to install a copy of the build with profiling, don’t
+forget to use ‘conf=CONF’ when issuing ‘make install’:
- * gs, netpbm, pnmtopng
+ make conf=prof install
- Most of these are listed on the Build-Depends line in the
-debian/control file. To ensure the creation of the lilypond deb is
-trouble-free, we recommend that you first install the following packages
-before starting dpkg-buildpackage by running apt-get as root.
- For Debian 2.2 (or 2.2r2, 2.2r3):
+See also
+........
- apt-get install task-debian-devel task-c++-dev \
- python-base libguile6-dev tetex-bin tetex-dev \
- tetex-extra flex bison texinfo groff gs \
- netpbm pnmtopng m4 gettext
+ *note Installing LilyPond from a local build::
- For Debian in development ("unstable", the future 2.3 or 3.0):
+1.5.4 Useful ‘make’ variables
+-----------------------------
- apt-get install task-debian-devel task-c++-dev \
- python-base libguile9-dev tetex-bin libkpathsea-dev \
- tetex-extra flex bison texinfo bibtex2html groff gs \
- netpbm pnmtopng m4 gettext
+If a less verbose build output if desired, the variable ‘QUIET_BUILD’
+may be set to ‘1’ on ‘make’ command line, or in ‘local.make’ at top of
+the build tree.
- And, just so that old fonts from previous versions of LilyPond won't
-interfere with your build, you may want to do this before the build too:
+1.6 Post-compilation options
+============================
- dpkg --purge lilypond lilypond1.3
+1.6.1 Installing LilyPond from a local build
+--------------------------------------------
-Windows NT/95
-=============
+If you configured ‘make’ to install your local build in a directory
+where you normally have write permission (such as your home directory),
+and you have compiled LilyPond by running ‘make’, you can install the
+program in your target directory by running:
- Separate instructions on building for W32 are available; See the
-files in `Documentation/ntweb/', included with the sources.
+ make install
-Problems
-========
+ If instead, your installation directory is not one that you can
+normally write to (such as the default ‘/usr/local/’, which typically is
+only writeable by the superuser), you will need to temporarily become
+the superuser when running ‘make install’:
- For help and questions use <help-gnu-music@gnu.org> and
-<gnu-music-discuss@gnu.org>. Please consult the faq before mailing
-your problems.
+ sudo make install
- If you find bugs, please send bug reports to <bug-gnu-music@gnu.org>.
+or...
- Bugs that are LilyPond's fault are listed in our TODO list on the
-web, or demonstrated in `input/bugs/'.
+ su -c 'make install'
- Bugs that are not LilyPond's fault are documented here.
+ If you don’t have superuser privileges, then you need to configure
+the installation directory to one that you can write to, and then
+re-install. See *note Configuring target directories::.
-LinuxPPC Bugs:
-**************
+1.6.2 Generating documentation
+------------------------------
- * egcs-1.1.2-12c (stock LinuxPPC R5) has a serious bug, upgrade to
- fixed in egcs-1.1.2-12f or gcc-2.95-0a,
- `ftp://dev.linuxppc.org/users/fsirl/R5/RPMS/ppc/'
+Documentation editor’s edit/compile cycle
+.........................................
- * egcs-1.0.2 (LinuxPPC R4): all compiling with `-O2' is suspect, in
- particular guile-1.3, and Lily herself will break.
+ • Initial documentation build:
-Linux-i386
-**********
+ make [-jX]
+ make [-jX CPU_COUNT=X] doc _## can take an hour or more_
+ make [-jX CPU_COUNT=X] doc-stage-1 _## to build only PDF documentation_
- * SuSE6.2 and similar platforms (glibc 2.1, libstdc++ 2.9.0)
+ • Edit/compile cycle:
- Lily will crash during parsing (which suggests a C++ library
- incompatibility). Precise cause, precise platform description or
- solution are not known.
+ _## edit source files, then..._
- Note that this only happens on some computers with the said
- platform.
+ make [-jX] _## needed if editing outside_
+ _## Documentation/, but useful anyway_
+ _## for finding Texinfo errors._
+ make [-jX CPU_COUNT=X] doc _## usually faster than initial build._
- * libg++ 2.7
+ • Reset:
- LilyPond occasionally crashes while parsing the initialisation
- files. This is a very obscure bug, and usually entering the
- commandline differently "fixes" it.
+ It is generally possible to remove the compiled documentation from
+ your system with ‘make doc-clean’, but this method is not 100%
+ guaranteed. Instead, if you want to be sure you have a clean
+ system, we recommend that you delete your ‘build/’ directory, and
+ begin compiling from scratch. Since the documentation compile
+ takes much longer than the non-documentation compile, this does not
+ increase the overall time by a great deal.
- lilypond input.ly
+Building documentation
+......................
- and
- lilypond -I. ./input.ly
- makes a difference
+After a successful compile (using ‘make’), the documentation can be
+built by issuing:
- Typical stacktrace:
- SIGSEGV
- __libc_malloc (bytes=16384)
- ?? ()
- yyFlexLexer::yy_create_buffer ()
- Includable_lexer::new_input (this=0x8209a00, s={strh_ = {
+ make doc
- This behaviour has been observed with machines that have old libg++
- versions (LinuxPPC feb '98, Red Hat 4.x).
+ or, to build only the PDF documentation and not the HTML,
-Solaris:
-********
+ make doc-stage-1
- * Sparc64/Solaris 2.6, GNU make-3.77
+ Note: The first time you run ‘make doc’, the process can
+ easily take an hour or more with not much output on the
+ command line.
- GNU make-3.77 is buggy on this platform, upgrade to 3.78.1 or
- newer.
+ After this initial build, ‘make doc’ only makes changes to the
+documentation where needed, so it may only take a minute or two to test
+changes if the documentation is already built.
- * Sparc64/Solaris 2.6, ld
+ If ‘make doc’ succeeds, the HTML documentation tree is available in
+‘out-www/offline-root/’, and can be browsed locally. Various portions
+of the documentation can be found by looking in ‘out/’ and ‘out-www’
+subdirectories in other places in the source tree, but these are only
+_portions_ of the docs. Please do not complain about anything which is
+broken in those places; the only complete set of documentation is in
+‘out-www/offline-root/’ from the top of the source tree.
- Not yet resolved.
+ ‘make doc’ sends the output from most of the compilation to logfiles.
+If the build fails for any reason, it should prompt you with the name of
+a logfile which will provide information to help you work out why the
+build failed. These logfiles are not deleted with ‘make doc-clean’. To
+remove all the logfiles generated by the compilation process, use:
+
+ make log-clean
+
+ ‘make doc’ compiles the documents for all languages. To save some
+compile time, the English language documents can be compiled on their
+own with:
+
+ make LANGS='' doc
+
+Similarly, it is possible to compile a subset of the translated
+documentation by specifying their language codes on the command line.
+For example, the French and German translations are compiled with:
+
+ make LANGS='de fr' doc
+
+Note that this will also compile the English version.
+
+ Compilation of documentation in Info format with images can be done
+separately by issuing:
+
+ make info
+
+An issue when switching branches between master and translation is the
+appearance/disappearance of translated versions of some manuals. If you
+see such a warning from make:
+
+ No rule to make target `X', needed by `Y'
+
+Your best bet is to delete the file Y.dep and to try again.
+
+Building a single document
+..........................
+
+It’s possible to build a single document. For example, to rebuild only
+‘contributor.pdf’, do the following:
+
+ cd build/
+ cd Documentation/
+ touch ../../Documentation/contributor.texi
+ make out=www out-www/contributor.pdf
+
+ If you are only working on a single document, test-building it in
+this way can give substantial time savings - recreating
+‘contributor.pdf’, for example, takes a matter of seconds.
+
+Saving time with ‘CPU_COUNT’
+............................
+
+The most time consuming task for building the documentation is running
+LilyPond to build images of music, and there cannot be several
+simultaneously running ‘lilypond-book’ instances, so the ‘-j’ ‘make’
+option does not significantly speed up the build process. To help speed
+it up, the makefile variable ‘CPU_COUNT’ may be set in ‘local.make’ or
+on the command line to the number of ‘.ly’ files that LilyPond should
+process simultaneously, e.g. on a bi-processor or dual core machine:
+
+ make -j3 CPU_COUNT=3 doc
+
+The recommended value of ‘CPU_COUNT’ is one plus the number of cores or
+processors, but it is advisable to set it to a smaller value unless your
+system has enough RAM to run that many simultaneous LilyPond instances.
+Also, values for the ‘-j’ option that pose problems with ‘make’ are less
+likely to pose problems with ‘make doc’ (this applies to both ‘-j’ and
+‘CPU_COUNT’). For example, with a quad-core processor, it is possible
+for ‘make -j5 CPU_COUNT=5 doc’ to work consistently even if ‘make -j5’
+rarely succeeds.
+
+AJAX search
+...........
+
+To build the documentation with interactive searching, use:
+
+ make doc AJAX_SEARCH=1
+
+ This requires PHP, and you must view the docs via a http connection
+(you cannot view them on your local filesystem).
+
+ Note: Due to potential security or load issues, this option is
+ not enabled in the official documentation builds. Enable at
+ your own risk.
+
+Installing documentation
+........................
+
+The HTML, PDF and if available Info files can be installed into the
+standard documentation path by issuing
+
+ make install-doc
+
+This also installs Info documentation with images if the installation
+prefix is properly set; otherwise, instructions to complete proper
+installation of Info documentation are printed on standard output.
+
+ To install the Info documentation separately, run:
+
+ make install-info
+
+Note that to get the images in Info documentation, ‘install-doc’ target
+creates symbolic links to HTML and PDF installed documentation tree in
+‘PREFIX/share/info’, in order to save disk space, whereas ‘install-info’
+copies images in ‘PREFIX/share/info’ subdirectories.
+
+ It is possible to build a documentation tree in
+‘out-www/online-root/’, with special processing, so it can be used on a
+website with content negotiation for automatic language selection; this
+can be achieved by issuing
+
+ make WEB_TARGETS=online doc
+
+and both ‘offline’ and ‘online’ targets can be generated by issuing
+
+ make WEB_TARGETS="offline online" doc
+
+ Several targets are available to clean the documentation build and
+help with maintaining documentation; an overview of these targets is
+available with
+
+ make help
+
+from every directory in the build tree. Most targets for documentation
+maintenance are available from ‘Documentation/’; for more information,
+see *note (lilypond-contributor)Documentation work::.
+
+ The makefile variable ‘QUIET_BUILD’ may be set to ‘1’ for a less
+verbose build output, just like for building the programs.
+
+Building documentation without compiling
+........................................
+
+The documentation can be built locally without compiling LilyPond
+binary, if LilyPond is already installed on your system.
+
+ From a fresh Git checkout, do
+
+ ./autogen.sh # ignore any warning messages
+ cp GNUmakefile.in GNUmakefile
+ make -C scripts && make -C python
+ nice make LILYPOND_EXTERNAL_BINARY=/path/to/bin/lilypond doc
+
+ Please note that this may break sometimes – for example, if a new
+feature is added with a test file in input/regression, even the latest
+development release of LilyPond will fail to build the docs.
+
+ You may build the manual without building all the ‘input/*’ stuff
+(i.e. mostly regression tests): change directory, for example to
+‘Documentation/’, issue ‘make doc’, which will build documentation in a
+subdirectory ‘out-www’ from the source files in current directory. In
+this case, if you also want to browse the documentation in its
+post-processed form, change back to top directory and issue
+
+ make out=www WWW-post
+
+
+Known issues and warnings
+.........................
+
+You may also need to create a script for ‘pngtopnm’ and ‘pnmtopng’. On
+GNU/Linux, I use this:
+
+export LD_LIBRARY_PATH=/usr/lib
+exec /usr/bin/pngtopnm "$@"
+
+ On MacOS X with fink, I use this:
+
+export DYLD_LIBRARY_PATH=/sw/lib
+exec /sw/bin/pngtopnm "$@"
+
+ On MacOS X with macports, you should use this:
+
+export DYLD_FALLBACK_LIBRARY_PATH=/opt/local/lib
+exec /opt/local/bin/pngtopnm "$@"
+
+1.6.3 Testing LilyPond binary
+-----------------------------
+
+LilyPond comes with an extensive suite that exercises the entire
+program. This suite can be used to test that the binary has been built
+correctly.
+
+ The test suite can be executed with:
+
+make test
+
+ If the test suite completes successfully, the LilyPond binary has
+been verified.
+
+ More information on the regression test suite is found at *note
+(lilypond-contributor)Regression tests::.
+
+1.7 Problems
+============
+
+For help and questions use <lilypond-user@gnu.org>. Send bug reports to
+<bug-lilypond@gnu.org>.
+
+ Bugs that are not fault of LilyPond are documented here.
+
+Compiling on MacOS X
+--------------------
+
+Here are special instructions for compiling under MacOS X. These
+instructions assume that dependencies are installed using MacPorts.
+(http://www.macports.org/) The instructions have been tested using OS X
+10.5 (Leopard).
+
+ First, install the relevant dependencies using MacPorts.
+
+ Next, add the following to your relevant shell initialization files.
+This is ‘~/.profile’ by default. You should create this file if it does
+not exist.
+
+ export PATH=/opt/local/bin:/opt/local/sbin:$PATH
+ export DYLD_FALLBACK_LIBRARY_PATH=/opt/local/lib:$DYLD_FALLBACK_LIBRARY_PATH
+
+ Now you must edit the generated ‘config.make’ file. Change
+
+ FLEXLEXER_FILE = /usr/include/FlexLexer.h
+
+to:
+
+ FLEXLEXER_FILE = /opt/local/include/FlexLexer.h
+
+ At this point, you should verify that you have the appropriate fonts
+installed with your ghostscript installation. Check ‘ls
+/opt/local/share/ghostscript/fonts’ for: ’c0590*’ files (.pfb, .pfb and
+.afm). If you don’t have them, run the following commands to grab them
+from the ghostscript SVN server and install them in the appropriate
+location:
+
+ svn export http://svn.ghostscript.com/ghostscript/tags/urw-fonts-1.0.7pre44/
+ sudo mv urw-fonts-1.0.7pre44/* /opt/local/share/ghostscript/fonts/
+ rm -rf urw-fonts-1.07pre44
+
+ Now run the ‘./configure’ script. To avoid complications with
+automatic font detection, add
+
+ --with-fonts-dir=/opt/local/share/ghostscript/fonts
+
+Solaris
+-------
+
+Solaris7, ./configure
+
+ ‘./configure’ needs a POSIX compliant shell. On Solaris7, ‘/bin/sh’
+is not yet POSIX compliant, but ‘/bin/ksh’ or bash is. Run configure
+like
+
+ CONFIG_SHELL=/bin/ksh ksh -c ./configure
+
+or
+
+ CONFIG_SHELL=/bin/bash bash -c ./configure
+
+FreeBSD
+-------
+
+To use system fonts, dejaview must be installed. With the default port,
+the fonts are installed in ‘usr/X11R6/lib/X11/fonts/dejavu’.
+
+ Open the file ‘$LILYPONDBASE/usr/etc/fonts/local.conf’ and add the
+following line just after the ‘<fontconfig>’ line. (Adjust as necessary
+for your hierarchy.)
+
+ <dir>/usr/X11R6/lib/X11/fonts</dir>
+
+International fonts
+-------------------
+
+On Mac OS X, all fonts are installed by default. However, finding all
+system fonts requires a bit of configuration; see this post
+(http://lists.gnu.org/archive/html/lilypond-user/2007-03/msg00472.html)
+on the ‘lilypond-user’ mailing list.
+
+ On Linux, international fonts are installed by different means on
+every distribution. We cannot list the exact commands or packages that
+are necessary, as each distribution is different, and the exact package
+names within each distribution changes. Here are some hints, though:
+
+Red Hat Fedora
+
+ taipeifonts fonts-xorg-truetype ttfonts-ja fonts-arabic \
+ ttfonts-zh_CN fonts-ja fonts-hebrew
+
+Debian GNU/Linux
+
+ apt-get install emacs-intl-fonts xfonts-intl-.* \
+ fonts-ipafont-gothic fonts-ipafont-mincho \
+ xfonts-bolkhov-75dpi xfonts-cronyx-100dpi xfonts-cronyx-75dpi
+
+Using lilypond python libraries
+-------------------------------
+
+If you want to use lilypond’s python libraries (either running certain
+build scripts manually, or using them in other programs), set
+‘PYTHONPATH’ to ‘python/out’ in your build directory, or
+‘.../usr/lib/lilypond/current/python’ in the installation directory
+structure.
+
+1.8 Concurrent stable and development versions
+==============================================
+
+It can be useful to have both the stable and the development versions of
+LilyPond available at once. One way to do this on GNU/Linux is to
+install the stable version using the precompiled binary, and run the
+development version from the source tree. After running ‘make all’ from
+the top directory of the LilyPond source files, there will be a binary
+called ‘lilypond’ in the ‘out’ directory:
+
+ <PATH TO>/lilypond/out/bin/lilypond
+
+ This binary can be run without actually doing the ‘make install’
+command. The advantage to this is that you can have all of the latest
+changes available after pulling from git and running ‘make all’, without
+having to uninstall the old version and reinstall the new.
+
+ So, to use the stable version, install it as usual and use the normal
+commands:
+
+ lilypond foobar.ly
+
+ To use the development version, create a link to the binary in the
+source tree by saving the following line in a file somewhere in your
+‘$PATH’:
+
+ exec <PATH TO>/lilypond/out/bin/lilypond "$@"
+
+ Save it as ‘Lilypond’ (with a capital L to distinguish it from the
+stable ‘lilypond’), and make it executable:
+
+ chmod +x Lilypond
+
+ Then you can invoke the development version this way:
+
+ Lilypond foobar.ly
+
+ TODO: ADD
+
+ - other compilation tricks for developers
+
+1.9 Build system
+================
-AIX
-***
+We currently use make and stepmake, which is complicated and only used
+by us. Hopefully this will change in the future.
- * AIX 4.3 ld
+Version-specific texinfo macros
+-------------------------------
- The following is from the gcc install/SPECIFIC file.
- Some versions of the AIX binder (linker) can fail with a
- relocation overflow severe error when the -bbigtoc option
- is used to link GCC-produced object files into an
- executable that overflows the TOC. A fix for APAR IX75823
- (OVERFLOW DURING LINK WHEN USING GCC AND -BBIGTOC) is
- available from IBM Customer Support and from its
- 27service.boulder.ibm.com website as PTF U455193.
+ • made with ‘scripts/build/create-version-itexi.py’ and
+ ‘scripts/build/create-weblinks-itexi.py’
- Binutils does not support AIX 4.3 (at least through release
- 2.9). GNU as and GNU ld will not work properly and one
- should not configure GCC to use those GNU utilities. Use
- the native AIX tools which do interoperate with GCC.
+ • used extensively in the ‘WEBSITE_ONLY_BUILD’ version of the website
+ (made with ‘website.make’, used on lilypond.org)
- add -Wl,-bbigtoc to USER_LDFLAGS, ie:
- LDFLAGS='-Wl,-bbigtoc' ./configure
+ • not (?) used in the main docs?
+ • the numbers in VERSION file: MINOR_VERSION should be 1 more than
+ the last release, VERSION_DEVEL should be the last *online*
+ release. Yes, VERSION_DEVEL is less than VERSION.