1 @c -*- coding: utf-8; mode: texinfo; -*-
3 Translation of GIT committish: FILL-IN-HEAD-COMMITTISH
5 When revising a translation, copy the HEAD committish of the
6 version that you are working on. For details, see the Contributors'
7 Guide, node Updating translation committishes..
15 @lilypondfile[quote]{rhythms-headword.ly}
17 This section discusses rhythms, rests, durations, beaming and bars.
22 * Displaying rhythms::
25 * Special rhythmic concerns::
30 @subsection Writing rhythms
40 @unnumberedsubsubsec Durations
42 @cindex durations, of notes
43 @cindex note durations
44 @cindex length of notes
54 Durations are designated by numbers and dots. Durations are entered
55 as their reciprocal values. For example, a quarter note is entered
56 using a @code{4} (since it is a 1/4 note), and a half note is entered
57 using a @code{2} (since it is a 1/2 note). For notes longer than a
58 whole you must use the @code{\longa} (a double breve) and
59 @code{\breve} commands. Durations as short as 128th notes may be
60 specified. Shorter values are possible, but only as beamed notes.
62 @c Two 64th notes are needed to obtain beams
63 @lilypond[quote,verbatim,relative=2]
66 c4 c8 c16 c32 c64 c128 c128
69 Here are the same durations with automatic beaming turned off.
71 @c not strictly "writing rhythms"; more of a "displaying" thing,
72 @c but it's ok here. -gp
73 @lilypond[quote,verbatim,relative=2]
77 c4 c8 c16 c32 c64 c128 c128
80 A note with the duration of a quadruple breve may be entered with
81 @code{\maxima}, but this is supported only within ancient music
82 notation. For details, see @ref{Ancient notation}.
84 @cindex duration, default
85 @cindex default note duration
86 @cindex note duration, default
88 If the duration is omitted, it is set to the previously
89 entered duration. The default for the first note is a quarter
92 @lilypond[quote,verbatim,relative=2]
98 @cindex notes, double-dotted
99 @cindex double-dotted notes
103 To obtain dotted note lengths, place a dot (@code{.}) after the
104 duration. Double-dotted notes are specified by appending two
107 @lilypond[quote,verbatim,relative=2]
108 a4 b c4. b8 a4. b4.. c8.
111 Some durations cannot be represented with just binary durations
112 and dots; they can be represented only by tying two or more
113 notes together. For details, see @ref{Ties}.
115 For ways of specifying durations for the syllables of lyrics and
116 ways of aligning lyrics to notes, see @ref{Vocal music}.
118 Optionally, notes can be spaced strictly proportionately to their
119 duration. For details of this and other settings which control
120 proportional notation, see @ref{Proportional notation}.
126 @funindex \dotsNeutral
127 @funindex dotsNeutral
129 Dots are normally moved up to avoid staff lines, except in
130 polyphonic situations. Dots may be manually placed above or below
131 the staff; see @ref{Direction and placement}.
145 @lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
146 {alternative-breve-note.ly}
148 @lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
149 {changing-the-number-of-augmentation-dots-per-note.ly}
158 @rglos{Duration names notes and rests}.
161 @ref{Automatic beams},
164 @ref{Writing rhythms},
167 @ref{Ancient notation},
168 @ref{Proportional notation}.
175 @rinternals{DotColumn}.
180 @c Deliberately duplicated in Durations and Rests. -gp
181 There is no fundamental limit to rest durations (both in terms of
182 longest and shortest), but the number of glyphs is limited:
183 rests from 128th to maxima (8 x whole) may be printed.
187 @unnumberedsubsubsec Tuplets
195 Tuplets are made from a music expression by multiplying all the
196 durations with a fraction:
199 \times @var{fraction} @{ @var{music} @}
203 The duration of @code{@var{music}} will be multiplied by the
204 fraction. The fraction's denominator will be printed over or
205 under the notes, optionally with a bracket. The most common
206 tuplet is the triplet in which 3 notes have the duration of 2, so
207 the notes are 2/3 of their written length.
209 @lilypond[quote,verbatim,relative=2]
210 a2 \times 2/3 { b4 b b }
211 c4 c \times 2/3 { b4 a g }
214 @cindex tuplet bracket placement
218 @funindex \tupletDown
220 @funindex \tupletNeutral
221 @funindex tupletNeutral
223 Tuplet brackets may be manually placed above or below the staff;
224 see @ref{Direction and placement}.
226 Tuplets may be nested:
228 @lilypond[quote,verbatim,relative=2]
230 c4 \times 4/5 { f8 e f \times 2/3 { e[ f g] } } f4
233 Modifying nested tuplets which begin at the same musical moment
234 must be done with @code{\tweak}.
236 To modify the duration of notes without printing a tuplet bracket,
237 see @ref{Scaling durations}.
243 @code{\tupletNeutral}.
249 @cindex tuplet formatting
250 @cindex triplet formatting
252 @funindex tupletNumberFormatFunction
253 @funindex tupletSpannerDuration
255 @lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
256 {entering-several-tuplets-using-only-one--times-command.ly}
258 @cindex Tuplet number changes
260 @funindex TupletNumber
262 @lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
263 {changing-the-tuplet-number.ly}
265 @lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
266 {non-default-tuplet-numbers.ly}
268 @lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
269 {controlling-tuplet-bracket-visibility.ly}
271 @lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
272 {permitting-line-breaks-within-beamed-tuplets.ly}
282 @rlearning{Tweaking methods}.
285 @ref{Time administration},
286 @ref{Scaling durations},
287 @ref{The tweak command},
288 @ref{Polymetric notation}.
294 @rinternals{TupletBracket},
295 @rinternals{TupletNumber},
296 @rinternals{TimeScaledMusic}.
299 @cindex grace notes within tuplet brackets
302 Grace notes may be placed within tuplet brackets, @emph{except}
303 when a staff begins with a grace note followed by a tuplet. In this
304 particular case, the grace note must be placed before the @code{\times}
305 command to avoid errors.
307 @cindex tempo marks within tuplet brackets
309 When using a tuplet at the beginning of a piece with a @code{\tempo}
310 mark, the music must be explicitly entered in a @code{\new Voice}
311 block, as discussed in @rlearning{Voices contain music}.
314 @node Scaling durations
315 @unnumberedsubsubsec Scaling durations
317 @cindex scaling durations
318 @cindex durations, scaling
320 You can alter the duration of single notes, rests or chords by a
321 fraction @code{N/M} by appending @code{*N/M} (or @code{*N} if @code{M}
322 is 1) to the duration. This will not affect the appearance of the
323 notes or rests produced, but the altered duration will be used in
324 calculating the position within the measure and setting the duration
325 in the MIDI output. Multiplying factors may be combined such as
328 In the following example, the first three notes take up exactly
329 two beats, but no triplet bracket is printed.
331 @lilypond[quote,relative=2,verbatim]
333 % Alter durations to triplets
334 a4*2/3 gis4*2/3 a4*2/3
337 % Double the duration of chord
339 % Duration of quarter, appears like sixteenth
343 The duration of spacing notes may also be modified by
344 a multiplier. This is useful for skipping many measures, e.g.,
347 @cindex compressing music
348 @cindex expanding music
350 @funindex \scaleDurations
351 @funindex scaleDurations
353 Longer stretches of music may be compressed by a fraction in the
354 same way, as if every note, chord or rest had the fraction as a
355 multiplier. This leaves the appearance of the music unchanged but
356 the internal duration of the notes will be multiplied by the
357 fraction @emph{num}/@emph{den}. The spaces around the dot are
358 required. Here is an example showing how music can be compressed
361 @lilypond[quote,relative=2,verbatim]
365 % Scale music by *2/3
366 \scaleDurations #'(2 . 3) {
370 \scaleDurations #'(2 . 1) {
375 One application of this command is in polymetric
376 notation, see @ref{Polymetric notation}.
382 @ref{Invisible rests},
383 @ref{Polymetric notation}.
390 @unnumberedsubsubsec Ties
396 A tie connects two adjacent note heads of the same pitch. The tie
397 in effect extends the duration of a note.
399 @warning{Ties should not be confused with @emph{slurs}, which
400 indicate articulation, or @emph{phrasing slurs}, which indicate
401 musical phrasing. A tie is just a way of extending a note
402 duration, similar to the augmentation dot.}
404 A tie is entered using the tilde symbol (@code{~}).
406 @lilypond[quote,verbatim,relative=2]
410 Ties are used either when the note crosses a bar line, or when
411 dots cannot be used to denote the rhythm. Ties should also be
412 used when note values cross larger subdivisions of the measure:
414 @lilypond[verbatim,quote]
421 If you need to tie many notes across bar lines, it may be
422 easier to use automatic note splitting, see @ref{Automatic note
423 splitting}. This mechanism automatically splits long notes, and
424 ties them across bar lines.
426 @cindex ties and chords
427 @cindex chords and ties
429 When a tie is applied to a chord, all note heads whose pitches
430 match are connected. When no note heads match, no ties will be
431 created. Chords may be partially tied by placing the tie inside
434 @lilypond[quote,verbatim,relative=1]
436 <c~ e g~ b> <c e g b>
439 @cindex repeating ties
440 @cindex ties, repeating
441 @cindex volta brackets and ties
442 @cindex ties and volta brackets
447 When a second alternative of a repeat starts with a tied note, you
448 have to specify the repeated tie as follows:
450 @lilypond[quote,relative=2,verbatim]
451 \repeat volta 2 { c g <c e>2 ~ }
453 % First alternative: following note is tied normally
455 % Second alternative: following note has a repeated tie
456 { <c e>2\repeatTie d4 c } }
459 @cindex laissez vibrer
460 @cindex ties, laissez vibrer
462 @funindex \laissezVibrer
463 @funindex laissezVibrer
465 @notation{L.v.}@: ties (@notation{laissez vibrer}) indicate that
466 notes must not be damped at the end. It is used in notation for
467 piano, harp and other string and percussion instruments. They can
468 be entered as follows:
470 @lilypond[quote,verbatim,relative=1]
471 <c f g>1\laissezVibrer
474 @cindex ties, placement
480 @funindex \tieNeutral
483 Ties may be manually placed above or below the staff; see
484 @ref{Direction and placement}.
486 @cindex ties, appearance
499 Ties may be made dashed, dotted, or a combination of solid and
502 @lilypond[quote, verbatim, relative=1]
515 Custom dash patterns can be specified:
517 @lilypond[quote, verbatim, relative=1]
518 \tieDashPattern #0.3 #0.75
520 \tieDashPattern #0.7 #1.5
526 Dash pattern definitions for ties have the same structure as dash
527 pattern definitions for slurs. For more information about complex dash
528 patterns, see @ref{Slurs}.
530 Override @var{whiteout} and @var{layer} layout properties for ties that
531 collide with other objects in a staff.
533 @lilypond[verbatim,quote,ragged-right,relative=2]
534 \override Tie #'layer = #-2
535 \override Staff.TimeSignature #'layer = #-1
536 \override Staff.KeySignature #'layer = #-1
537 \override Staff.TimeSignature #'whiteout = ##t
538 \override Staff.KeySignature #'whiteout = ##t
551 @code{\tieDashPattern},
552 @code{\tieHalfDashed},
553 @code{\tieHalfSolid},
559 @lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
560 {using-ties-with-arpeggios.ly}
562 @lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
563 {engraving-ties-manually.ly}
568 @rglos{laissez vibrer}.
572 @ref{Automatic note splitting}.
575 @rlsr{Expressive marks},
579 @rinternals{LaissezVibrerTie},
580 @rinternals{LaissezVibrerTieColumn},
581 @rinternals{TieColumn},
585 Switching staves when a tie is active will not produce a slanted tie.
587 Changing clefs or ottavations during a tie is not really well-defined.
588 In these cases, a slur may be preferable.
592 @subsection Writing rests
594 Rests are entered as part of the music in music expressions.
599 * Full measure rests::
603 @unnumberedsubsubsec Rests
606 @cindex rest, entering durations
621 Rests are entered like notes with the note name @code{r}.
622 Durations longer than a whole rest use the following predefined
625 @c \time 16/1 is used to avoid spurious bar lines
626 @c and long tracts of empty measures
627 @lilypond[quote,verbatim,relative=2]
629 % These two lines are just to prettify this example
631 \override Staff.TimeSignature #'stencil = ##f
632 % Print a maxima rest, equal to four breves
634 % Print a longa rest, equal to two breves
638 r1 r2 r4 r8 r16 r32 r64 r128
642 @cindex rest, multi-measure
643 @cindex rest, whole-measure
645 Whole measure rests, centered in the middle of the measure, must be
646 entered as multi-measure rests. They can be used for a single
647 measure as well as many measures and are discussed in
648 @ref{Full measure rests}.
650 @cindex rest, specifying vertical position
652 To explicitly specify a rest's vertical position, write a note
653 followed by @code{\rest}. A rest of the duration of the note will
654 be placed at the staff position where the note would appear. This
655 allows for precise manual formatting of polyphonic music, since the
656 automatic rest collision formatter will not move these rests.
658 @lilypond[quote,verbatim,relative=2]
664 @lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
675 @ref{Full measure rests}.
686 @c Deliberately duplicated in Durations and Rests. -gp
687 There is no fundamental limit to rest durations (both in terms of
688 longest and shortest), but the number of glyphs is limited: there
689 are rests from 128th to maxima (8 x whole).
692 @node Invisible rests
693 @unnumberedsubsubsec Invisible rests
696 @cindex invisible rest
697 @cindex rest, invisible
705 An invisible rest (also called a @q{spacer rest}) can be entered
706 like a note with the note name@tie{}@code{s}:
708 @lilypond[verbatim,quote,relative=2]
715 Spacer rests are available only in note mode and chord mode. In
716 other situations, for example, when entering lyrics, the
717 command @code{\skip} is used to skip a musical moment.
718 @code{\skip} requires an explicit duration, but this is ignored if
719 the lyrics derive their durations from the notes in an associated
720 melody through @code{\addlyrics} or @code{\lyricsto}.
722 @lilypond[quote,verbatim,relative=2]
735 Because @code{\skip} is a command, it does not affect the default
736 durations of following notes, unlike@tie{}@code{s}.
738 @lilypond[quote,verbatim,relative=2]
741 \repeat unfold 8 { a4 }
751 A spacer rest implicitly causes @code{Staff} and @code{Voice}
752 contexts to be created if none exist, just like notes and rests
755 @lilypond[quote,verbatim,relative=2]
759 @code{\skip} simply skips musical time; it creates no output of
762 @lilypond[quote,verbatim,relative=2]
763 % This is valid input, but does nothing
764 \skip 1 \skip1 \skip 1
770 @rlearning{Visibility and color of objects}.
774 @ref{Visibility of objects}.
780 @rinternals{SkipMusic}.
783 @node Full measure rests
784 @unnumberedsubsubsec Full measure rests
786 @cindex multi-measure rests
787 @cindex full-measure rests
788 @cindex rest, multi-measure
789 @cindex rest, full-measure
790 @cindex whole rest for a full measure
791 @cindex rest, whole for a full measure
795 Rests for one or more full measures are entered like notes with
796 the note name uppercase @code{R}:
798 @lilypond[quote,verbatim,relative=2]
799 % Rest measures contracted to single measure
800 \compressFullBarRests
807 The duration of full-measure rests is identical to the duration
808 notation used for notes. The duration in a multi-measure rest must
809 always be an integral number of measure-lengths, so augmentation dots
810 or fractions must often be used:
812 @lilypond[quote,verbatim,relative=2]
813 \compressFullBarRests
819 R1*13/8 | R1*13/8*12 |
824 A full-measure rest is printed as either a whole or breve rest,
825 centered in the measure, depending on the time signature.
827 @lilypond[quote,verbatim,relative=2]
836 @cindex multi-measure rest, expanding
837 @cindex multi-measure rest, contracting
839 @funindex \expandFullBarRests
840 @funindex expandFullBarRests
841 @funindex \compressFullBarRests
842 @funindex compressFullBarRests
844 By default a multi-measure rest is expanded in the printed score to
845 show all the rest measures explicitly. Alternatively, a multi-measure
846 rest can be shown as a single measure containing a multi-measure rest
847 symbol, with the number of measures of rest printed above the measure:
849 @lilypond[quote,verbatim,relative=2]
851 \time 3/4 r2. | R2.*2 |
854 % Rest measures contracted to single measure
855 \compressFullBarRests
857 % Rest measures expanded
864 @cindex text on multi-measure rest
865 @cindex multi-measure rest, attaching text
866 @cindex script on multi-measure rest
867 @cindex multi-measure rest, script
868 @cindex fermata on multi-measure rest
869 @cindex multi-measure rest, attaching fermata
870 @cindex markup on multi-measure rest
871 @cindex multi-measure rest with markup
873 @funindex \fermataMarkup
874 @funindex fermataMarkup
875 @funindex MultiMeasureRestText
877 Markups can be added to multi-measure rests.
878 The predefined command @code{\fermataMarkup}
879 is provided for adding fermatas.
881 @lilypond[quote,verbatim,relative=2]
882 \compressFullBarRests
884 R2.*10^\markup { \italic "ad lib." }
888 @warning{Markups attached to a multi-measure rest are objects of type
889 @code{MultiMeasureRestText}, not @code{TextScript}. Overrides must
890 be directed to the correct object, or they will be ignored. See the
893 @lilypond[quote,verbatim,relative=2]
894 % This fails, as the wrong object name is specified
895 \override TextScript #'padding = #5
897 % This is the correct object name to be specified
898 \override MultiMeasureRestText #'padding = #5
902 When a multi-measure rest immediately follows a @code{\partial}
903 setting, resulting bar-check warnings may not be displayed.
906 @funindex \textLengthOn
907 @funindex textLengthOn
908 @funindex \textLengthOff
909 @funindex textLengthOff
910 @funindex \fermataMarkup
911 @funindex fermataMarkup
912 @funindex \compressFullBarRests
913 @funindex compressFullBarRests
914 @funindex \expandFullBarRests
915 @funindex expandFullBarRests
918 @code{\textLengthOn},
919 @code{\textLengthOff},
920 @code{\fermataMarkup},
921 @code{\compressFullBarRests},
922 @code{\expandFullBarRests}.
930 @cindex kirchenpausen
932 @lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
933 {changing-form-of-multi-measure-rests.ly}
935 @cindex multi-measure rests, positioning
936 @cindex positioning multi-measure rests
938 @lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
939 {positioning-multi-measure-rests.ly}
941 @lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
942 {multi-measure-rest-markup.ly}
947 @rglos{multi-measure rest}.
952 @ref{Formatting text},
959 @rinternals{MultiMeasureRest},
960 @rinternals{MultiMeasureRestNumber},
961 @rinternals{MultiMeasureRestText}.
964 @cindex fingerings and multi-measure rests
965 @cindex multi-measure rests and fingerings
968 Fingerings over multi-measure rests (e.g. @code{R1*10-4}) may result
969 in the fingering numeral colliding with the bar counter
972 @cindex condensing rests
973 @cindex rest, condensing ordinary
975 There is no way to automatically condense multiple ordinary rests
976 into a single multi-measure rest.
978 @cindex rest, collisions of
980 Multi-measure rests do not take part in rest collisions.
982 @node Displaying rhythms
983 @subsection Displaying rhythms
990 * Polymetric notation::
991 * Automatic note splitting::
992 * Showing melody rhythms::
996 @unnumberedsubsubsec Time signature
998 @cindex time signature
1004 The time signature is set as follows:
1006 @lilypond[quote,verbatim,relative=2]
1011 @cindex time signature, visibility of
1013 Time signatures are printed at the beginning of a piece
1014 and whenever the time signature changes. If a change takes place
1015 at the end of a line a warning time signature sign is printed
1016 there. This default behavior may be changed, see
1017 @ref{Visibility of objects}.
1019 @lilypond[quote,verbatim,relative=2]
1029 @cindex time signature style
1032 @funindex \numericTimeSignature
1033 @funindex numericTimeSignature
1034 @funindex \defaultTimeSignature
1035 @funindex defaultTimeSignature
1037 The time signature symbol that is used in 2/2 and 4/4 time can be
1038 changed to a numeric style:
1040 @lilypond[quote,verbatim,relative=2]
1044 % Change to numeric style
1045 \numericTimeSignature
1048 % Revert to default style
1049 \defaultTimeSignature
1055 Mensural time signatures are covered in
1056 @ref{Mensural time signatures}.
1058 @cindex time signature default settings
1059 @cindex autobeaming properties for time signatures
1060 @cindex beaming, time signature default properties
1061 @funindex \overrideTimeSignatureSettings
1063 In addition to setting the printed time signature, the @code{\time}
1064 command also sets time-signature-based default values for the properties
1065 @code{baseMoment}, @code{beatStructure}, and @code{beamExceptions}. The
1066 predefined default values for these properties can be found in
1067 @file{scm/time-signature-settings.scm}. The existing default values can
1068 be changed, or new default values can be added:
1070 @lilypond[quote,verbatim]
1074 \overrideTimeSignatureSettings
1075 #'(4 . 4) % timeSignatureFraction
1076 #'(1 . 4) % baseMomentFraction
1077 #'(3 1) % beatStructure
1078 #'() % beamExceptions
1080 \repeat unfold 8 { c8 } |
1086 @code{\overrideTimeSignatureSettings} takes four arguments:
1091 @code{@var{timeSignatureFraction}}, a Scheme pair describing the
1095 @code{@var{baseMomentFraction}}, a Scheme pair containing the numerator
1096 and denominator of the basic timing unit for the time signature.
1099 @code{@var{beatStructure}}, a Scheme list indicating the structure
1100 of the beats in the measure, in units of the base moment.
1103 @code{@var{beamExceptions}}, an alist containing any beaming rules
1104 for the time signature that go beyond ending at every beat, as
1105 described in @ref{Setting automatic beam behavior}.
1108 The context containing @code{\overrideTimeSignatureSettings} must
1109 be instantiated before the @code{\overrideTimeSignatureSettings}
1110 call is executed. That means it must either be explicitly
1111 instantiated or there must be music in the context before the
1112 @code{\overrideTimeSignatureSettings} call:
1114 @lilypond[quote,verbatim]
1117 % This call will fail because the context isn't yet instantiated
1118 \overrideTimeSignatureSettings
1119 #'(4 . 4) % timeSignatureFraction
1120 #'(1 . 4) % baseMomentFraction
1121 #'(3 1) % beatStructure
1122 #'() % beamExceptions
1124 c8^\markup {"Beamed (2 2)"}
1125 \repeat unfold 7 { c8 } |
1126 % This call will succeed
1127 \overrideTimeSignatureSettings
1128 #'(4 . 4) % timeSignatureFraction
1129 #'(1 . 4) % baseMomentFraction
1130 #'(3 1) % beatStructure
1131 #'() % beamExceptions
1133 c8^\markup {"Beamed (3 1)"}
1134 \repeat unfold 7 { c8 } |
1140 @cindex time signature properties, restoring default values
1141 @cindex restoring default properties for time signatures
1142 @funindex \revertTimeSignatureSettings
1144 Changed values of default time signature properties can be restored
1145 to the original values:
1147 @lilypond[quote,verbatim]
1150 \repeat unfold 8 { c8 } |
1151 \overrideTimeSignatureSettings
1152 #'(4 . 4) % timeSignatureFraction
1153 #'(1 . 4) % baseMomentFraction
1154 #'(3 1) % beatStructure
1155 #'() % beamExceptions
1157 \repeat unfold 8 { c8 } |
1158 \revertTimeSignatureSettings #'(4 . 4)
1160 \repeat unfold 8 { c8 } |
1165 Different values of default time signature properties can be established
1166 for different staves by moving the @code{Timing_translator} and the
1167 @code{Default_bar_line_engraver} from the @code{Score} context to the
1168 @code{Staff} context.
1170 @lilypond[quote, verbatim]
1174 \overrideTimeSignatureSettings
1175 #'(4 . 4) % timeSignatureFraction
1176 #'(1 . 4) % baseMomentFraction
1177 #'(3 1) % beatStructure
1178 #'() % beamExceptions
1180 \repeat unfold 8 {c''8}
1183 \overrideTimeSignatureSettings
1184 #'(4 . 4) % timeSignatureFraction
1185 #'(1 . 4) % baseMomentFraction
1186 #'(1 3) % beatStructure
1187 #'() % beamExceptions
1189 \repeat unfold 8 {c''8}
1195 \remove "Timing_translator"
1196 \remove "Default_bar_line_engraver"
1200 \consists "Timing_translator"
1201 \consists "Default_bar_line_engraver"
1208 @code{\numericTimeSignature},
1209 @code{\defaultTimeSignature}.
1214 @lilypondfile[verbatim,quote,texidoc,doctitle]
1215 {time-signature-printing-only-the-numerator-as-a-number-instead-of-the-fraction.ly}
1220 @rglos{time signature}
1223 @ref{Mensural time signatures},
1224 @ref{Time administration}.
1229 Internals Reference:
1230 @rinternals{TimeSignature},
1231 @rinternals{Timing_translator}.
1233 @node Metronome marks
1234 @unnumberedsubsubsec Metronome marks
1237 @cindex beats per minute
1238 @cindex metronome mark
1239 @cindex metronome marking with text
1244 A basic metronome mark is simple to write:
1246 @lilypond[verbatim,quote,relative=1]
1252 Metronome marks may also be printed as a range of two numbers:
1254 @lilypond[verbatim,quote,relative=1]
1260 Tempo indications with text can be used instead:
1262 @lilypond[verbatim,quote,relative=2]
1268 Combining a metronome mark and text will automatically place the
1269 metronome mark within parentheses:
1271 @lilypond[verbatim,quote,relative=2]
1272 \tempo "Allegro" 4 = 160
1277 In general, the text can be any markup object:
1279 @lilypond[verbatim,quote,relative=2]
1280 \tempo \markup { \italic Faster } 4 = 132
1281 a8-. r8 b-. r gis-. r a-. r
1284 A parenthesized metronome mark with no textual indication may be
1285 written by including an empty string in the input:
1287 @lilypond[verbatim,quote,relative=2]
1295 @lilypondfile[verbatim,quote,texidoc,doctitle]
1296 {printing-metronome-and-rehearsal-marks-below-the-staff.ly}
1298 @c perhaps also an example of how to move it horizontally?
1300 @lilypondfile[verbatim,quote,texidoc,doctitle]
1301 {changing-the-tempo-without-a-metronome-mark.ly}
1303 @lilypondfile[verbatim,quote,texidoc,doctitle]
1304 {creating-metronome-marks-in-markup-mode.ly}
1306 For more details, see @ref{Formatting text}.
1312 @rglos{metronomic indication},
1313 @rglos{tempo indication},
1314 @rglos{metronome mark}.
1317 @ref{Formatting text},
1321 @rlsr{Staff notation}.
1323 Internals Reference:
1324 @rinternals{MetronomeMark}.
1328 @unnumberedsubsubsec Upbeats
1332 @cindex partial measure
1333 @cindex measure, partial
1334 @cindex pickup measure
1335 @cindex measure, change length
1337 @funindex measurePosition
1341 Partial or pick-up measures, such as an anacrusis or upbeat, are
1342 entered using the @code{\partial} command, with the syntax
1345 \partial @var{duration}
1349 where @code{@var{duration}} is the rhythmic length of the
1350 remaining interval of the current measure before the start of the
1353 @lilypond[quote,verbatim,relative=2]
1358 The partial measure can be any duration less than the full measure:
1360 @lilypond[quote,verbatim,relative=2]
1361 \partial 8*3 c8 d e |
1365 Internally, @code{\partial @var{duration}} is translated into:
1368 \set Timing.measurePosition -@var{duration}
1371 For example, @code{\partial 8*3} becomes:
1374 \set Timing.measurePosition = #(ly:make-moment -3 8)
1377 The property @code{measurePosition} contains a rational number
1378 indicating how much of the measure has passed at this point. Note
1379 that this is set to a negative number by the @code{\partial} command:
1380 i.e., @code{\partial 4} is internally translated to @w{@code{-4}}, meaning
1381 @qq{there is a quarter note left in the measure.}
1394 @rinternals{Timing_translator}.
1398 The @code{\partial} command is intended to be used only at the
1399 beginning of a piece. If you use it after the beginning, some
1400 odd warnings or effects may occur, in this case use
1401 @code{\set Timing.measurePosition} instead.
1403 @node Unmetered music
1404 @unnumberedsubsubsec Unmetered music
1406 @cindex bar lines, turning off
1407 @cindex bar numbering, turning off
1409 @cindex unmetered music
1411 @funindex \cadenzaOn
1413 @funindex \cadenzaOff
1414 @funindex cadenzaOff
1416 Bar lines and bar numbers are calculated automatically. For
1417 unmetered music (some cadenzas, for example), this is not desirable.
1418 To turn off automatic calculation of bar lines and bar numbers,
1419 use the command @code{\cadenzaOn}, and use @code{\cadenzaOff}
1420 to turn them on again.
1422 @lilypond[verbatim,relative=2,quote]
1425 c4 c d8[ d d] f4 g4.
1431 Bar numbering is resumed at the end of the cadenza as if the
1432 cadenza were not there:
1434 @lilypond[verbatim,relative=2,quote]
1435 % Show all bar numbers
1436 \override Score.BarNumber #'break-visibility = #all-visible
1439 c4 c d8[ d d] f4 g4.
1445 @cindex beams, in cadenzas
1446 @cindex beams, in unmetered music
1447 @cindex cadenza, with beams
1448 @cindex unmetered music, with beams
1450 Automatic beaming is disabled by @code{\cadenzaOn} and enabled
1451 by @code{\cadenzaOff}. Therefore, all beaming in cadenzas
1452 must be entered manually (@ref{Manual beams}).
1454 @lilypond[verbatim,relative=2,quote]
1455 \repeat unfold 8 { c8 }
1457 \repeat unfold 5 { c8 }
1460 \repeat unfold 8 { c8 }
1463 Note that these predefined commands affect all staves in the
1464 score, even when they are placed in just one @code{Voice}
1465 context. To change this, move the @code{Timing_translator}
1466 from the @code{Score} context to the @code{Staff} context, as
1467 shown in @ref{Polymetric notation}.
1480 @ref{Visibility of objects},
1481 @ref{Polymetric notation},
1488 @cindex cadenza line breaks
1489 @cindex cadenza page breaks
1490 @cindex unmetered music, line breaks
1491 @cindex unmetered music, page breaks
1492 @cindex breaks in unmetered music
1493 @cindex line breaks in cadenzas
1494 @cindex page breaks in cadenzas
1495 @cindex line breaks in unmetered music
1496 @cindex page breaks in unmetered music
1500 LilyPond will insert line breaks and page breaks only at a
1501 bar line. Unless the unmetered music ends before the end of the
1502 staff line, you will need to insert invisible bar lines with
1509 to indicate where breaks can occur.
1511 You should explicitly create a @code{Voice} context when starting a
1512 piece with @code{\cadenzaOn}, otherwise strange errors may occur.
1518 c16[^"Solo Free Time" d e f] g2.
1526 @node Polymetric notation
1527 @unnumberedsubsubsec Polymetric notation
1529 @c This section necessarily uses \set
1530 @c This is acceptable -td
1532 @cindex double time signatures
1533 @cindex signatures, polymetric
1534 @cindex time signatures, polymetric
1535 @cindex time signatures, double
1536 @cindex polymetric signatures
1537 @cindex meter, polymetric
1539 @funindex timeSignatureFraction
1540 @funindex \scaleDurations
1541 @funindex scaleDurations
1545 Polymetric notation is supported explicitly or by manually modifying the
1546 visible time signature symbol and/or scaling note durations.
1548 @subsubheading Different time signatures with equal-length measures
1550 Set a common time signature for each staff, and set the
1551 @code{timeSignatureFraction} to the desired fraction. Then use the
1552 @code{\scaleDurations} function to scale the durations of the notes in
1553 each staff to the common time signature.
1555 @cindex beams, with polymetric meters
1556 @cindex polymetric meters, with beams
1558 In the following example, music with the time signatures of 3/4, 9/8 and
1559 10/8 are used in parallel. In the second staff, shown durations are
1560 multiplied by 2/3 (because 2/3 * 9/8 = 3/4) and in the third staff, the
1561 shown durations are multiplied by 3/5 (because 3/5 * 10/8 = 3/4). It
1562 may be necessary to insert beams manually, as the duration scaling will
1563 affect the autobeaming rules.
1565 @lilypond[quote,verbatim]
1574 \set Staff.timeSignatureFraction = #'(9 . 8)
1575 \scaleDurations #'(2 . 3)
1576 \repeat unfold 6 { c8[ c c] }
1580 \set Staff.timeSignatureFraction = #'(10 . 8)
1581 \scaleDurations #'(3 . 5) {
1582 \repeat unfold 2 { c8[ c c] }
1583 \repeat unfold 2 { c8[ c] } |
1584 c4. c \times 2/3 { c8[ c c] } c4
1590 @subsubheading Different time signatures with unequal-length measures
1592 Each staff can be given its own independent time signature by
1593 moving the @code{Timing_translator} and the
1594 @code{Default_bar_line_engraver} to the @code{Staff} context.
1596 @lilypond[quote,verbatim]
1600 \remove "Timing_translator"
1601 \remove "Default_bar_line_engraver"
1605 \consists "Timing_translator"
1606 \consists "Default_bar_line_engraver"
1610 % Now each staff has its own time signature.
1634 @funindex \compoundMeter
1635 @cindex compound time signatures
1636 @cindex time signature, compound
1638 @subsubheading Compound time signatures
1640 These are created using the @code{\compoundMeter} function. The syntax
1644 \compoundMeter #'@code{(list of lists)}
1647 The simplest construction is a single list, where the @emph{last} number
1648 indicates the bottom number of the time signature and those that come
1649 before it, the top numbers.
1651 @lilypond[quote,verbatim]
1653 \compoundMeter #'((2 2 2 8))
1654 \repeat unfold 6 c8 \repeat unfold 12 c16
1658 More complex meters can be constructed using additional lists. Also,
1659 automatic beaming settings will be adjusted depending on the values.
1661 @lilypond[quote,verbatim]
1663 \compoundMeter #'((1 4) (3 8))
1664 \repeat unfold 5 c8 \repeat unfold 10 c16
1668 \compoundMeter #'((1 2 3 8) (3 4))
1669 \repeat unfold 12 c8
1676 @rglos{polymetric time signature},
1680 @ref{Automatic beams},
1682 @ref{Time signature},
1683 @ref{Scaling durations}.
1688 Internals Reference:
1689 @rinternals{TimeSignature},
1690 @rinternals{Timing_translator},
1691 @rinternals{Default_bar_line_engraver},
1696 When using different time signatures in parallel, notes at the same
1697 moment will be placed at the same horizontal location. However, the bar
1698 lines in the different staves will cause the note spacing to be less
1699 regular in each of the individual staves than would be normal without
1700 the different time signatures.
1702 @node Automatic note splitting
1703 @unnumberedsubsubsec Automatic note splitting
1705 @cindex notes, splitting
1706 @cindex splitting notes
1707 @cindex rests, splitting
1708 @cindex splitting rests
1710 @funindex Note_heads_engraver
1711 @funindex Completion_heads_engraver
1712 @funindex Completion_rest_engraver
1714 Long notes which overrun bar lines can be converted automatically to
1715 tied notes. This is done by replacing the @code{Note_heads_engraver}
1716 with the @code{Completion_heads_engraver}. Similarly, long rests which
1717 overrun bar lines are split automatically by replacing the
1718 @code{Rest_engraver} with the @code{Completion_rest_engraver}. In the
1719 following example, notes and rests crossing the bar lines are split,
1720 notes are also tied.
1722 @lilypond[quote,verbatim,relative=1]
1724 \remove "Note_heads_engraver"
1725 \consists "Completion_heads_engraver"
1726 \remove "Rest_engraver"
1727 \consists "Completion_rest_engraver"
1730 { c2. c8 d4 e f g a b c8 c2 b4 a g16 f4 e d c8. c2 r1*2 }
1733 These engravers split all running notes and rests at the bar line, and
1734 inserts ties for notes. One of its uses is to debug complex scores: if
1735 the measures are not entirely filled, then the ties show exactly how
1736 much each measure is off.
1744 @rlearning{Engravers explained},
1745 @rlearning{Adding and removing engravers}.
1750 Internals Reference:
1751 @rinternals{Note_heads_engraver},
1752 @rinternals{Completion_heads_engraver},
1753 @rinternals{Rest_engraver},
1754 @rinternals{Completion_rest_engraver},
1755 @rinternals{Forbid_line_break_engraver}.
1760 Not all durations (especially those containing tuplets) can be
1761 represented exactly with normal notes and dots, but the
1762 @code{Completion_heads_engraver} will not insert tuplets.
1764 The @code{Completion_heads_engraver} only affects notes; it does not
1768 @node Showing melody rhythms
1769 @unnumberedsubsubsec Showing melody rhythms
1771 @cindex melody rhythms, showing
1772 @cindex rhythms, showing melody
1774 Sometimes you might want to show only the rhythm of a melody. This
1775 can be done with the rhythmic staff. All pitches of notes on such a
1776 staff are squashed, and the staff itself has a single line
1778 @lilypond[quote,relative=1,verbatim]
1780 \new RhythmicStaff {
1781 \new Voice = "myRhythm" {
1789 \lyricsto "myRhythm" {
1797 @cindex guitar chord charts
1798 @cindex strumming rhythms, showing
1799 @cindex guitar strumming rhythms, showing
1801 @funindex Pitch_squash_engraver
1802 @funindex \improvisationOn
1803 @funindex improvisationOn
1804 @funindex \improvisationOff
1805 @funindex improvisationOff
1807 Guitar chord charts often show the strumming rhythms. This can
1808 be done with the @code{Pitch_squash_engraver} and
1809 @code{\improvisationOn}.
1812 @lilypond[quote,verbatim]
1820 \consists Pitch_squash_engraver
1833 @code{\improvisationOn},
1834 @code{\improvisationOff}.
1840 @lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
1841 {guitar-strum-rhythms.ly}
1848 Internals Reference:
1849 @rinternals{RhythmicStaff},
1850 @rinternals{Pitch_squash_engraver}.
1858 * Setting automatic beam behavior::
1863 @node Automatic beams
1864 @unnumberedsubsubsec Automatic beams
1866 By default, beams are inserted automatically:
1868 @cindex beams, manual
1869 @cindex manual beams
1870 @cindex beams, customizing rules
1872 @funindex \autoBeamOn
1873 @funindex autoBeamOn
1874 @funindex \autoBeamOff
1875 @funindex autoBeamOff
1877 @lilypond[quote,verbatim,relative=2]
1879 \time 6/8 c8 c c c8. c16 c8
1882 If these automatic decisions are not satisfactory, beaming can be
1883 entered explicitly; see @ref{Manual beams}. Beams @emph{must} be
1884 entered manually if beams are to be extended over rests.
1886 If automatic beaming is not required, it may be turned off with
1887 @code{\autoBeamOff} and on with @code{\autoBeamOn}:
1889 @lilypond[quote,relative=1,verbatim]
1890 c4 c8 c8. c16 c8. c16 c8
1897 @cindex melismata, with beams
1898 @cindex beams, with melismata
1900 @warning{If beams are used to indicate melismata in songs, then
1901 automatic beaming should be switched off with @code{\autoBeamOff}
1902 and the beams indicated manually.}
1904 @warning{Using @code{@bs{}partcombine} with @code{@bs{}autoBeamOff} can
1905 produce unintended results. See the snippet below for more information.}
1907 Beaming patterns that differ from the automatic defaults can be
1908 created; see @ref{Setting automatic beam behavior}.
1911 @code{\autoBeamOff},
1915 @cindex beams, line breaks
1916 @cindex line breaks, beams
1917 @cindex beams, with knee gap
1918 @cindex knee gap, with beams
1922 @lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
1923 {beams-across-line-breaks.ly}
1925 @lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
1926 {changing-beam-knee-gap.ly}
1928 @cindex beams, \partcombine with \autoBeamOff
1929 @cindex voices, \partcombine with \autoBeamOff
1931 @lilypondfile [verbatim, quote, ragged-right, texidoc, doctitle]
1932 {partcombine-and-autobeamoff.ly}
1937 @ref{Setting automatic beam behavior}.
1940 @file{scm/auto-beam.scm}.
1945 Internals Reference:
1946 @rinternals{Auto_beam_engraver},
1947 @rinternals{Beam_engraver},
1949 @rinternals{BeamEvent},
1950 @rinternals{BeamForbidEvent},
1951 @rinternals{beam-interface},
1952 @rinternals{unbreakable-spanner-interface}.
1954 @node Setting automatic beam behavior
1955 @unnumberedsubsubsec Setting automatic beam behavior
1957 @cindex beams, with lyrics
1958 @cindex lyrics, with beams
1960 @funindex autoBeaming
1961 @funindex baseMoment
1962 @funindex beamExceptions
1963 @funindex beatStructure
1964 @funindex measureLength
1970 In most instances, automatic beams will end at the end of a beat.
1971 The ending points for beats are determined by the context properties
1972 @code{baseMoment} and @code{beatStructure}. @code{beatStructure}
1973 is a scheme list that defines the length of each beat in the measure
1974 in units of @code{baseMoment}. By default, @code{baseMoment} is
1975 the one over numerator of the time signature. By default,
1976 each unit of length @code{baseMoment} is a single beat.
1978 @lilypond[quote,relative=2,verbatim]
1980 c16^"default" c c c c |
1981 \set Timing.beatStructure = #'(2 3)
1982 c16^"(2+3)" c c c c |
1983 \set Timing.beatStructure = #'(3 2)
1984 c16^"(3+2)" c c c c |
1987 Beam setting changes can be limited to specific contexts. If no
1988 setting is included in a lower-level context, the setting of the
1989 enclosing context will apply.
1991 @lilypond[quote, verbatim,relative=1]
1994 \set Staff.beatStructure = #'(2 3 2)
2004 \set Voice.beatStructure = #'(1 3 3)
2012 When multiple voices are used the @code{Staff} context must be
2013 specified if the beaming is to be applied to all voices in the
2016 @lilypond[quote,verbatim,relative=2]
2019 % Change applied to Voice by default -- does not work correctly
2020 % Because of autogenerated voices, all beating will
2021 % be at baseMoment (1 . 8)
2022 \set beatStructure = #'(3 1 1 2)
2023 << {a8 a a a16 a a a a8 a} \\ {f4. f8 f f f} >>
2025 % Works correctly with context Staff specified
2026 \set Staff.beatStructure = #'(3 1 1 2)
2027 << {a8 a a a16 a a a a8 a} \\ {f4. f8 f f f} >>
2030 The value of @code{baseMoment} can be adjusted to change
2031 the beaming behavior, if desired. When this is done,
2032 the value of @code{beatStructure} must be set to be
2033 compatible with the new value of @code{baseMoment}.
2035 @lilypond[quote,verbatim,relative=2]
2037 \set Timing.baseMoment = #(ly:make-moment 1 16)
2038 \set Timing.beatStructure = #'(7 3)
2039 \repeat unfold 10 { a16 }
2042 @code{baseMoment} is a @i{moment}; a unit of musical duration. A
2043 quantity of type @i{moment} is created by the scheme function
2044 @code{ly:make-moment}. For more information about this function,
2045 see @ref{Time administration}.
2047 By default @code{baseMoment} is set to one over the denominator of
2048 the time signature. Any exceptions to this default can be found in
2049 @file{scm/time-signature-settings.scm}.
2051 Special autobeaming rules (other than ending a beam on a beat)
2052 are defined in the @code{beamExceptions} property.
2054 @lilypond[quote,relative=2,verbatim]
2056 \set Timing.beatStructure = #'(2 1)
2057 \set Timing.beamExceptions =
2059 (end . ;entry for end of beams
2060 ( ;start of alist of end points
2061 ((1 . 32) . (2 2 2)) ;rule for 1/32 beams -- end each 1/16
2062 ))) %close all entries
2064 \repeat unfold 6 { c32 } |
2067 @code{beamExceptions} is an alist with a key of rule-type and a value
2070 At this time the only available value of rule-type is
2071 @code{'end} for beam ending.
2073 Beaming-rules is a scheme alist (or list of pairs) that indicates the
2074 beam type and the grouping to be applied to beams containing notes with
2075 a shortest duration of that beam type.
2078 #'((beam-type1 . grouping-1)
2079 (beam-type2 . grouping-2)
2080 (beam-type3 . grouping-3))
2083 Beam type is a scheme pair indicating the duration of the beam,
2084 e.g., @code{(1 . 16)}.
2086 Grouping is a scheme list indicating the grouping to be applied to
2087 the beam. The grouping is in units of the beam type.
2089 @warning{ A @code{beamExceptions} value must be @emph{complete}
2090 exceptions list. That is, every exception that should be applied
2091 must be included in the setting. It is not possible to add, remove,
2092 or change only one of the exceptions. While this may seem cumbersome,
2093 it means that the current beaming settings need not be known in order
2094 to specify a new beaming pattern.}
2096 When the time signature is changed, default values of
2097 @code{Timing.baseMoment}, @code{Timing.beatStructure},
2098 and @code{Timing.beamExceptions} are set. Setting the time signature
2099 will reset the automatic beaming settings for the @code{Timing}
2100 context to the default behavior.
2102 @lilypond[quote,verbatim,relative=2]
2104 \repeat unfold 6 { a8 }
2106 \set Timing.beatStructure = #'(4 2)
2107 \repeat unfold 6 { a8 }
2108 % go back to default behavior
2110 \repeat unfold 6 { a8 }
2113 The default automatic beaming settings for a time signature
2114 are determined in @file{scm/time-signature-settings.scm}.
2115 Changing the default automatic beaming settings
2116 for a time signature is described in @ref{Time signature}.
2118 Many automatic beaming settings for a time signature contain an
2119 entry for @code{beamExceptions}. For example, 4/4 time tries to
2120 beam the measure in two if there are only eighth notes. The
2121 @code{beamExceptions} rule can override the @code{beatStructure} setting
2122 if @code{beamExceptions} is not reset.
2124 @lilypond[quote,verbatim,relative=2]
2126 \set Timing.baseMoment = #(ly:make-moment 1 8)
2127 \set Timing.beatStructure = #'(3 3 2)
2128 % This won't beam (3 3 2) because of beamExceptions
2129 \repeat unfold 8 {c8} |
2130 % This will beam (3 3 2) because we clear beamExceptions
2131 \set Timing.beamExceptions = #'()
2132 \repeat unfold 8 {c8}
2135 In a similar fashion, eighth notes in 3/4 time are beamed as a full
2136 measure by default. To beam eighth notes in 3/4 time on the beat,
2137 reset @code{beamExceptions}.
2139 @lilypond[quote,verbatim,relative=2]
2141 % by default we beam in (3) due to beamExceptions
2142 \repeat unfold 6 {a8} |
2143 % This will beam (1 1 1) due to beatLength
2144 \set Timing.beamExceptions = #'()
2145 \repeat unfold 6 {a8}
2148 @i{@strong{How automatic beaming works}}
2150 When automatic beaming is enabled, the placement of automatic beams
2151 is determined by the context properties
2152 @code{baseMoment}, @code{beatStructure}, and @code{beamExceptions}.
2154 The following rules, in order of priority, apply when determining
2155 the appearance of beams:
2159 If a manual beam is specified with @code{[..]} set the beam
2160 as specified, otherwise
2163 if a beam-ending rule is defined in @code{beamExceptions}
2164 for the beam-type, use it to determine the valid places where
2165 beams may end, otherwise
2168 if a beam-ending rule is defined in @code{beamExceptions}
2169 for a longer beam-type, use it to determined the valid places
2170 where beams may end, otherwise
2173 use the values of @code{baseMoment} and @code{beatStructure} to
2174 determine the ends of the beats in the measure, and
2175 end beams at the end of beats.
2179 In the rules above, the @emph{beam-type} is the duration of the
2180 shortest note in the beamed group.
2182 The default beaming rules can be found in
2183 @file{scm/time-signature-settings.scm}.
2187 @cindex beams, subdividing
2189 @lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
2190 {subdividing-beams.ly}
2192 @cindex beamlets, orienting
2194 @lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
2195 {strict-beat-beaming.ly}
2197 @cindex measure groupings
2198 @cindex beats, grouping
2199 @cindex grouping beats
2200 @cindex measure sub-grouping
2202 @lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
2203 {conducting-signs,-measure-grouping-signs.ly}
2205 @cindex beam, endings in a score
2206 @cindex beam, endings with multiple voices
2208 @lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
2209 {beam-endings-in-score-context.ly}
2214 @file{scm/beam-settings.scm}.
2219 Internals Reference:
2220 @rinternals{Auto_beam_engraver},
2222 @rinternals{BeamForbidEvent},
2223 @rinternals{beam-interface}.
2227 If a score ends while an automatic beam has not been ended and is
2228 still accepting notes, this last beam will not be typeset at all.
2229 The same holds for polyphonic voices, entered with
2230 @code{<< @dots{} \\ @dots{} >>}. If a polyphonic voice ends while an
2231 automatic beam is still accepting notes, it is not typeset.
2232 The workaround for these problems is to manually beam the last
2233 beam in the voice or score.
2235 By default, the @code{Timing} translator is aliased to the
2236 @code{Score} context. This means that setting the time signature
2237 in one staff will affect the beaming of the other staves as well.
2238 Thus, a time signature setting in a later staff will reset custom
2239 beaming that was set in an earlier staff.
2240 One way to avoid this problem is to set the time signature
2243 @lilypond[quote,verbatim,relative=2]
2247 \set Timing.baseMoment = #(ly:make-moment 1 8)
2248 \set Timing.beatStructure = #'(1 5)
2249 \repeat unfold 6 { a8 }
2252 \repeat unfold 6 { a8 }
2257 The default beam settings for the time signature can also be changed, so
2258 that the desired beaming will always be used. Changes in automatic
2259 beaming settings for a time signature are described in
2260 @ref{Time signature}.
2262 @lilypond[quote,verbatim,relative=2]
2265 \overrideTimeSignatureSettings
2266 #'(3 . 4) % timeSignatureFraction
2267 #'(1 . 8) % baseMomentFraction
2268 #'(1 5) % beatStructure
2269 #'() % beamExceptions
2271 \repeat unfold 6 { a8 }
2275 \repeat unfold 6 { a8 }
2281 @unnumberedsubsubsec Manual beams
2283 @cindex beams, manual
2284 @cindex manual beams
2289 In some cases it may be necessary to override the automatic
2290 beaming algorithm. For example, the autobeamer will not put beams
2291 over rests or bar lines, and in choral scores the beaming is
2292 often set to follow the meter of the lyrics rather than the
2293 notes. Such beams can be specified manually by
2294 marking the begin and end point with @code{[} and @code{]}.
2296 @lilypond[quote,relative=1,verbatim]
2297 r4 r8[ g' a r] r g[ | a] r
2300 @cindex manual beams, direction shorthand for
2301 @cindex manual beams, grace notes
2303 Beaming direction can be set manually using direction indicators:
2305 @lilypond[quote,relative=2,verbatim]
2306 c8^[ d e] c,_[ d e f g]
2312 Individual notes may be marked with @code{\noBeam} to prevent them
2315 @lilypond[quote,verbatim,relative=2]
2320 Grace note beams and normal note beams can occur simultaneously.
2321 Unbeamed grace notes are not put into normal note beams.
2323 @lilypond[quote,verbatim,relative=2]
2325 \grace { e32[ d c d] }
2331 @funindex stemLeftBeamCount
2332 @funindex stemRightBeamCount
2334 Even more strict manual control with the beams can be achieved by
2335 setting the properties @code{stemLeftBeamCount} and
2336 @code{stemRightBeamCount}. They specify the number of beams to
2337 draw on the left and right side, respectively, of the next note.
2338 If either property is set, its value will be used only once, and
2339 then it is erased. In this example, the last @code{f} is printed
2340 with only one beam on the left side, i.e., the eighth-note beam of
2341 the group as a whole.
2343 @lilypond[quote,relative=2,verbatim]
2346 \set stemLeftBeamCount = #2
2347 \set stemRightBeamCount = #1
2349 \set stemLeftBeamCount = #1
2361 @lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
2362 {flat-flags-and-beam-nibs.ly}
2367 @ref{Direction and placement},
2373 Internals Reference:
2375 @rinternals{BeamEvent},
2376 @rinternals{Beam_engraver},
2377 @rinternals{beam-interface},
2378 @rinternals{Stem_engraver}.
2381 @node Feathered beams
2382 @unnumberedsubsubsec Feathered beams
2384 @cindex beams, feathered
2385 @cindex feathered beams
2387 @funindex \featherDurations
2388 @funindex featherDurations
2389 @funindex grow-direction
2391 Feathered beams are used to indicate that a small group of notes
2392 should be played at an increasing (or decreasing) tempo, without
2393 changing the overall tempo of the piece. The extent of the
2394 feathered beam must be indicated manually using @code{[} and
2395 @code{]}, and the beam feathering is turned on by specifying a
2396 direction to the @code{Beam} property @code{grow-direction}.
2398 If the placement of the notes and the sound in the MIDI output is to
2399 reflect the @emph{ritardando} or @emph{accelerando} indicated by the
2400 feathered beam the notes must be grouped as a music expression delimited
2401 by braces and preceded by a @code{featherDurations} command which specifies
2402 the ratio between the durations of the first and last notes in the
2405 The square brackets show the extent of the beam and the braces show
2406 which notes are to have their durations modified. Normally these
2407 would delimit the same group of notes, but this is not required: the
2408 two commands are independent.
2410 In the following example the eight 16th notes occupy exactly the
2411 same time as a half note, but the first note is one half as long
2412 as the last one, with the intermediate notes gradually
2413 lengthening. The first four 32nd notes gradually speed up, while
2414 the last four 32nd notes are at a constant tempo.
2416 @lilypond[relative=1,verbatim,quote]
2417 \override Beam #'grow-direction = #LEFT
2418 \featherDurations #(ly:make-moment 2 1)
2419 { c16[ c c c c c c c] }
2420 \override Beam #'grow-direction = #RIGHT
2421 \featherDurations #(ly:make-moment 2 3)
2423 % revert to non-feathered beams
2424 \override Beam #'grow-direction = #'()
2429 The spacing in the printed output represents the
2430 note durations only approximately, but the MIDI output is exact.
2434 @code{\featherDurations}.
2444 The @code{\featherDurations} command only works with very short
2445 music snippets, and when numbers in the fraction are small.
2455 * Bar and bar number checks::
2460 @unnumberedsubsubsec Bar lines
2463 @cindex measure lines
2464 @cindex closing bar lines
2465 @cindex bar lines, closing
2466 @cindex double bar lines
2467 @cindex bar lines, double
2473 Bar lines delimit measures, and are also used to indicate
2474 repeats. Normally, simple bar lines are automatically inserted
2475 into the printed output at places based on the current time
2478 The simple bar lines inserted automatically can be changed to
2479 other types with the @code{\bar} command. For example, a closing
2480 double bar line is usually placed at the end of a piece:
2482 @lilypond[quote,relative=1,verbatim]
2486 It is not invalid if the final note in a measure does not
2487 end on the automatically entered bar line: the note is assumed
2488 to carry over into the next measure. But if a long sequence
2489 of such carry-over measures appears the music can appear compressed
2490 or even flowing off the page. This is because automatic line
2491 breaks happen only at the end of complete measures, i.e., where
2492 all notes end before the end of a measure.
2494 @warning{An incorrect duration can cause line breaks to be
2495 inhibited, leading to a line of highly compressed music or
2496 music which flows off the page.}
2499 @cindex bar lines, invisible
2500 @cindex measure lines, invisible
2502 Line breaks are also permitted at manually inserted bar lines
2503 even within incomplete measures. To allow a line break without
2504 printing a bar line, use the following:
2511 This will insert an invisible bar line and allow (but not
2512 force) a line break to occur at this point. The bar number
2513 counter is not increased. To force a line break see
2514 @ref{Line breaking}.
2516 @cindex manual bar lines
2517 @cindex manual measure lines
2518 @cindex bar lines, manual
2519 @cindex measure lines, manual
2521 This and other special bar lines may be inserted manually at any
2522 point. When they coincide with the end of a measure they replace
2523 the simple bar line which would have been inserted there
2524 automatically. When they do not coincide with the end of a measure
2525 the specified bar line is inserted at that point in the printed
2528 Note that manual bar lines are purely visual. They do not affect
2529 any of the properties that a normal bar line would affect, such as
2530 measure numbers, accidentals, line breaks, etc. They do not affect
2531 the calculation and placement of subsequent automatic bar lines.
2532 When a manual bar line is placed where a normal bar line already
2533 exists, the effects of the original bar line are not altered.
2535 Two types of simple bar lines and five types of double bar lines are
2536 available for manual insertion:
2538 @lilypond[quote,relative=1,verbatim]
2550 together with dotted and dashed bar lines:
2552 @lilypond[quote,relative=1,verbatim]
2559 and five types of repeat bar line:
2561 @lilypond[quote,relative=1,verbatim]
2570 Additionally, a bar line can be printed as a simple tick:
2571 @lilypond[quote,relative=1,verbatim]
2574 However, as such ticks are typically used in Gregorian chant, it is
2575 preferable to use @code{\divisioMinima} there instead, described in
2576 the section @ref{Divisiones} in Gregorian chant.
2580 For in-line segno signs, there are three types of bar lines which
2581 differ in their behavior at line breaks:
2583 @lilypond[quote,relative=2,verbatim]
2601 Although the bar line types signifying repeats may be inserted
2602 manually they do not in themselves cause LilyPond to recognize
2603 a repeated section. Such repeated sections are better entered
2604 using the various repeat commands (see @ref{Repeats}), which
2605 automatically print the appropriate bar lines.
2607 In addition, you can specify @code{"||:"}, which is equivalent to
2608 @code{"|:"} except at line breaks, where it gives a double bar
2609 line at the end of the line and a start repeat at the beginning of
2612 @lilypond[quote,relative=2,verbatim]
2620 For combinations of repeats with the segno sign, there are six different
2623 @lilypond[quote,relative=2,verbatim]
2652 In scores with many staves, a @code{\bar} command in one staff is
2653 automatically applied to all staves. The resulting bar lines are
2654 connected between different staves of a @code{StaffGroup},
2655 @code{PianoStaff}, or @code{GrandStaff}.
2657 @lilypond[quote,relative=1,verbatim]
2665 \new Staff { \clef bass c4 g e g }
2667 \new Staff { \clef bass c2 c2 }
2672 @cindex default bar lines, changing
2673 @cindex bar lines, default, changing
2678 @funindex defaultBarType
2683 The command @samp{\bar @var{bartype}} is a shortcut for
2684 @samp{\set Timing.whichBar = @var{bartype}}. A bar line is
2685 created whenever the @code{whichBar} property is set.
2687 The default bar type used for automatically inserted bar lines is
2688 @code{"|"}. This may be changed at any time with
2689 @samp{\set Timing.defaultBarType = @var{bartype}}.
2694 @ref{Line breaking},
2696 @ref{Grouping staves}.
2701 Internals Reference:
2702 @rinternals{BarLine} (created at @code{Staff} level),
2703 @rinternals{SpanBar} (across staves),
2704 @rinternals{Timing_translator} (for Timing properties).
2708 @unnumberedsubsubsec Bar numbers
2711 @cindex measure numbers
2712 @cindex numbers, bar
2713 @cindex numbers, measure
2715 @funindex currentBarNumber
2717 Bar numbers are typeset by default at the start of every line except
2718 the first line. The number itself is stored in the
2719 @code{currentBarNumber} property, which is normally updated
2720 automatically for every measure. It may also be set manually:
2722 @lilypond[verbatim,quote,relative=1]
2725 \set Score.currentBarNumber = #50
2729 @cindex bar numbers, regular spacing
2731 @funindex barNumberVisibility
2734 Bar numbers can be typeset at regular intervals instead of just at
2735 the beginning of every line. To do this the default behavior
2736 must be overridden to permit bar numbers to be printed at places
2737 other than the start of a line. This is controlled by the
2738 @code{break-visibility} property of @code{BarNumber}. This takes
2739 three values which may be set to @code{#t} or @code{#f} to specify
2740 whether the corresponding bar number is visible or not. The order
2741 of the three values is @code{end of line visible}, @code{middle of
2742 line visible}, @code{beginning of line visible}. In the following
2743 example bar numbers are printed at all possible places:
2745 @lilypond[verbatim,quote,relative=1]
2746 \override Score.BarNumber #'break-visibility = #'#(#t #t #t)
2747 \set Score.currentBarNumber = #11
2748 % Permit first bar number to be printed
2756 @lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
2757 {printing-the-bar-number-for-the-first-measure.ly}
2759 @lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
2760 {printing-bar-numbers-at-regular-intervals.ly}
2762 @cindex measure number, format
2763 @cindex bar number, format
2765 @lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
2766 {printing-bar-numbers-inside-boxes-or-circles.ly}
2768 @cindex bar numbers, with letters
2769 @cindex bar numbers, with repeats
2771 @lilypondfile[verbatim,quote,texidoc,doctitle]
2772 {alternative-bar-numbering.ly}
2774 @cindex bar number alignment
2776 @lilypondfile[verbatim,quote,texidoc,doctitle]
2777 {aligning-bar-numbers.ly}
2779 @lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
2780 {removing-bar-numbers-from-a-score.ly}
2786 Internals Reference:
2787 @rinternals{BarNumber},
2788 @rinternals{Bar_number_engraver}.
2790 @cindex bar number collision
2791 @cindex collision, bar number
2794 Bar numbers may collide with the top of the @code{StaffGroup} bracket,
2795 if there is one. To solve this, the @code{padding} property of
2796 @code{BarNumber} can be used to position the number correctly. See
2797 @rinternals{StaffGroup} and @rinternals{BarNumber} for more.
2800 @node Bar and bar number checks
2801 @unnumberedsubsubsec Bar and bar number checks
2804 @cindex bar number check
2805 @cindex measure check
2806 @cindex measure number check
2808 @funindex barCheckSynchronize
2811 Bar checks help detect errors in the entered durations. A bar check
2812 may be entered using the bar symbol, @code{|}, at any place where a
2813 bar line is expected to fall. If bar check lines are encountered at
2814 other places, a list of warnings is printed in the log file, showing
2815 the line numbers and lines in which the bar checks failed. In the
2816 next example, the second bar check will signal an error.
2819 \time 3/4 c2 e4 | g2 |
2822 Bar checks can also be used in lyrics:
2827 Twin -- kle | Twin -- kle |
2831 An incorrect duration can result in a completely garbled score,
2832 especially if the score is polyphonic, so a good place to start
2833 correcting input is by scanning for failed bar checks and
2834 incorrect durations.
2836 If successive bar checks are off by the same musical interval,
2837 only the first warning message is displayed. This allows the
2838 warning to focus on the source of the timing error.
2842 @funindex pipeSymbol
2844 It is also possible to redefine the action taken when a bar check
2845 or pipe symbol, @code{|}, is encountered in the input, so that
2846 it does something other than a bar check. This is done by
2847 assigning a music expression to @code{pipeSymbol}.
2848 In the following example @code{|} is set to insert a double bar
2849 line wherever it appears in the input, rather than checking
2852 @lilypond[quote,verbatim]
2853 pipeSymbol = \bar "||"
2862 @funindex \barNumberCheck
2863 @funindex barNumberCheck
2865 When copying large pieces of music, it can be helpful to check that
2866 the LilyPond bar number corresponds to the original that you are
2867 entering from. This can be checked with @code{\barNumberCheck}, for
2871 \barNumberCheck #123
2875 will print a warning if the @code{currentBarNumber} is not 123
2876 when it is processed.
2884 @node Rehearsal marks
2885 @unnumberedsubsubsec Rehearsal marks
2887 @cindex rehearsal marks
2888 @cindex mark, rehearsal
2893 To print a rehearsal mark, use the @code{\mark} command.
2895 @lilypond[quote,verbatim,relative=2]
2903 The mark is incremented automatically if you use @code{\mark
2904 \default}, but you can also use an integer argument to set the
2905 mark manually. The value to use is stored in the property
2906 @code{rehearsalMark}.
2908 @lilypond[quote,verbatim,relative=2]
2917 The letter@tie{}@q{I} is skipped in accordance with engraving
2918 traditions. If you wish to include the letter @q{I}, then use one
2919 of the following commands, depending on which style of rehearsal mark
2920 you want (letters only, letters in a hollow box, or letters in a
2924 \set Score.markFormatter = #format-mark-alphabet
2925 \set Score.markFormatter = #format-mark-box-alphabet
2926 \set Score.markFormatter = #format-mark-circle-alphabet
2929 @lilypond[quote,verbatim,relative=2]
2930 \set Score.markFormatter = #format-mark-box-alphabet
2938 @cindex rehearsal mark format
2939 @cindex rehearsal mark style
2940 @cindex style, rehearsal mark
2941 @cindex format, rehearsal mark
2942 @cindex mark, rehearsal, style
2943 @cindex mark, rehearsal, format
2944 @cindex rehearsal mark, manual
2945 @cindex mark, rehearsal, manual
2946 @cindex custom rehearsal mark
2947 @cindex manual rehearsal mark
2949 The style is defined by the property @code{markFormatter}. It is
2950 a function taking the current mark (an integer) and the current
2951 context as argument. It should return a markup object. In the
2952 following example, @code{markFormatter} is set to a pre-defined
2953 procedure. After a few measures, it is set to a procedure that
2954 produces a boxed number.
2956 @lilypond[quote,verbatim,relative=2]
2957 \set Score.markFormatter = #format-mark-numbers
2960 \set Score.markFormatter = #format-mark-box-numbers
2962 \set Score.markFormatter = #format-mark-circle-numbers
2964 \set Score.markFormatter = #format-mark-circle-letters
2968 The file @file{scm/translation-functions.scm} contains the
2969 definitions of @code{format-mark-numbers} (the default format),
2970 @code{format-mark-box-numbers}, @code{format-mark-letters} and
2971 @code{format-mark-box-letters}. These can be used as inspiration
2972 for other formatting functions.
2974 You may use @code{format-mark-barnumbers},
2975 @code{format-mark-box-barnumbers}, and
2976 @code{format-mark-circle-barnumbers} to get bar numbers instead of
2977 incremented numbers or letters.
2979 Other styles of rehearsal mark can be specified manually:
2986 Note that @code{Score.markFormatter} does not affect marks specified
2987 in this manner. However, it is possible to apply a @code{\markup} to the
2991 \mark \markup@{ \box A1 @}
2996 @cindex D.S. al Fine
2998 @cindex music glyphs
2999 @cindex glyphs, music
3001 @funindex \musicglyph
3002 @funindex musicglyph
3004 Music glyphs (such as the segno sign) may be printed inside a
3007 @lilypond[quote,verbatim,relative=1]
3008 c1 \mark \markup { \musicglyph #"scripts.segno" }
3009 c1 \mark \markup { \musicglyph #"scripts.coda" }
3010 c1 \mark \markup { \musicglyph #"scripts.ufermata" }
3015 See @ref{The Feta font}, for a list of symbols which may be
3016 printed with @code{\musicglyph}.
3018 For common tweaks to the positioning of rehearsal marks, see
3019 @ref{Formatting text}. For more precise control, see
3020 @code{break-alignable-interface} in @ref{Aligning objects}.
3025 @ref{The Feta font},
3026 @ref{Formatting text},
3027 @ref{Aligning objects}.
3030 @file{scm/translation-functions.scm} contains
3031 the definitions of @code{format-mark-numbers} and
3032 @code{format-mark-letters}. They can be used as inspiration for
3033 other formatting functions.
3038 Internals Reference:
3039 @rinternals{MarkEvent},
3040 @rinternals{Mark_engraver},
3041 @rinternals{RehearsalMark}.
3044 @node Special rhythmic concerns
3045 @subsection Special rhythmic concerns
3050 * Aligning to cadenzas::
3051 * Time administration::
3055 @unnumberedsubsubsec Grace notes
3059 @cindex appoggiatura
3060 @cindex acciaccatura
3063 @funindex \slashedGrace
3064 @funindex \acciaccatura
3065 @funindex \appoggiatura
3067 Grace notes are musical ornaments, printed in a smaller font, that take
3068 up no additional logical time in a measure.
3070 @lilypond[quote,relative=2,verbatim]
3072 \grace { b16[ c16] } a2)
3075 There are three other types of grace notes possible; the
3076 @emph{acciaccatura} -- an unmeasured grace note indicated by a slurred
3077 note with a slashed stem -- and the @emph{appoggiatura}, which takes a
3078 fixed fraction of the main note it is attached to and prints without the
3079 slash. It is also possible to write a grace note with a slashed stem,
3080 like the @emph{acciaccatura} but without the slur, so as to place it
3081 between notes that are slurred themselves, using the
3082 @code{\slashedGrace} function.
3084 @lilypond[quote,relative=2,verbatim]
3087 \acciaccatura { g16[ f] } e2
3088 \slashedGrace a,8 g4
3089 \slashedGrace b16 a4(
3090 \slashedGrace b8 a2)
3093 The placement of grace notes is synchronized between different staves.
3094 In the following example, there are two sixteenth grace notes for every
3097 @lilypond[quote,relative=2,verbatim]
3099 \new Staff { e2 \grace { c16[ d e f] } e2 }
3100 \new Staff { c2 \grace { g8[ b] } c2 }
3104 @cindex grace notes, following
3106 @funindex \afterGrace
3107 @funindex afterGrace
3109 If you want to end a note with a grace, use the @code{\afterGrace}
3110 command. It takes two arguments: the main note, and the grace
3111 notes following the main note.
3113 @lilypond[quote,verbatim,relative=2]
3114 c1 \afterGrace d1 { c16[ d] } c1
3117 This will put the grace notes after a space lasting 3/4 of the
3118 length of the main note. The default fraction 3/4 can be changed by
3119 setting @code{afterGraceFraction}. The following example shows
3120 the results from setting the space at the default, at 15/16, and
3121 finally at 1/2 of the main note.
3123 @lilypond[quote,verbatim,relative=2]
3126 c1 \afterGrace d1 { c16[ d] } c1
3129 #(define afterGraceFraction (cons 15 16))
3130 c1 \afterGrace d1 { c16[ d] } c1
3133 #(define afterGraceFraction (cons 1 2))
3134 c1 \afterGrace d1 { c16[ d] } c1
3139 The space between the main note and the grace note may also be
3140 specified using spacers. The following example places the grace
3141 note after a space lasting 7/8 of the main note.
3143 @lilypond[quote,verbatim,relative=2]
3147 { s2 s4. \grace { c16[ d] } }
3153 @cindex tweaking grace notes
3154 @cindex grace notes, tweaking
3155 @cindex grace notes, changing layout settings
3157 A @code{\grace} music expression will introduce special
3158 typesetting settings, for example, to produce smaller type, and
3159 set directions. Hence, when introducing layout tweaks to
3160 override the special settings, they should be placed inside
3161 the grace expression. The overrides should also be reverted
3162 inside the grace expression. Here, the grace note's default stem
3163 direction is overridden and then reverted.
3165 @lilypond[quote,verbatim,relative=2]
3177 @cindex stem, with slash
3182 @lilypondfile[verbatim,quote,texidoc,doctitle]
3183 {using-grace-note-slashes-with-normal-heads.ly}
3185 @lilypondfile[verbatim,quote,texidoc,doctitle]
3186 {tweaking-grace-layout-within-music.ly}
3188 @lilypondfile[verbatim,quote,texidoc,doctitle]
3189 {redefining-grace-note-global-defaults.ly}
3191 @lilypondfile[verbatim,quote,texidoc,doctitle]
3192 {positioning-grace-notes-with-floating-space.ly}
3197 @rglos{grace notes},
3198 @rglos{acciaccatura},
3199 @rglos{appoggiatura}.
3205 @file{ly/grace-init.ly}.
3210 Internals Reference:
3211 @rinternals{GraceMusic},
3212 @rinternals{Grace_beam_engraver},
3213 @rinternals{Grace_engraver},
3214 @rinternals{Grace_spacing_engraver}.
3219 @cindex acciaccatura, multi-note
3220 @cindex multi-note acciaccatura
3221 @cindex grace-note synchronization
3223 A multi-note beamed @i{acciaccatura} is printed without a slash,
3224 and looks exactly the same as a multi-note beamed
3227 @c TODO Add link to LSR snippet to add slash when available
3229 Grace note synchronization can also lead to surprises. Staff
3230 notation, such as key signatures, bar lines, etc., are also
3231 synchronized. Take care when you mix staves with grace notes and
3232 staves without, for example,
3234 @lilypond[quote,relative=2,verbatim]
3236 \new Staff { e4 \bar "|:" \grace c16 d2. }
3237 \new Staff { c4 \bar "|:" d2. }
3242 This can be remedied by inserting grace skips of the corresponding
3243 durations in the other staves. For the above example
3245 @lilypond[quote,relative=2,verbatim]
3247 \new Staff { e4 \bar "|:" \grace c16 d2. }
3248 \new Staff { c4 \bar "|:" \grace s16 d2. }
3252 The use of grace notes within voice contexts confuses the way the voice
3253 is typeset. This can be overcome by inserting a rest or note between the
3254 voice command and the grace note.
3256 @lilypond[quote,verbatim]
3258 \acciaccatura { f8 } e8 r8 \acciaccatura { f8 } e8 r4
3265 r8 r8 \voiceOne \accMusic \oneVoice r8 |
3266 r8 \voiceOne r8 \accMusic \oneVoice r8 |
3271 s8 s8 \voiceTwo \accMusic \oneVoice s8 |
3272 s8 \voiceTwo r8 \accMusic \oneVoice s8 |
3279 Grace sections should only be used within sequential music expressions.
3280 Nesting or juxtaposing grace sections is not supported, and might
3281 produce crashes or other errors.
3283 Each grace note in MIDI output has a length of 1/4 of its actual
3284 duration. If the combined length of the grace notes is greater than the
3285 length of the preceding note a @qq{@code{Going back in MIDI time}}
3286 error will be generated. Either make the grace notes shorter in
3287 duration, for example:
3290 \acciaccatura @{ c'8[ d' e' f' g'] @}
3296 \acciaccatura @{ c'16[ d' e' f' g'] @}
3299 Or explicitly change the musical duration:
3302 \acciaccatura @{ \scaleDurations #' (1 . 2) @{ c'8[ d' e' f' g'] @} @}
3305 See @ref{Scaling durations}.
3308 @node Aligning to cadenzas
3309 @unnumberedsubsubsec Aligning to cadenzas
3312 @cindex cadenza, aligning to
3313 @cindex aligning to cadenza
3315 In an orchestral context, cadenzas present a special problem: when
3316 constructing a score that includes a measured cadenza or other solo
3317 passage, all other instruments should skip just as many notes as the
3318 length of the cadenza, otherwise they will start too soon or too late.
3320 One solution to this problem is to use the functions
3321 @code{mmrest-of-length} and @code{skip-of-length}. These Scheme
3322 functions take a defined piece of music as an argument and generate a
3323 multi-measure rest or @code{\skip} exactly as long as the piece.
3325 @lilypond[verbatim,quote]
3326 MyCadenza = \relative c' {
3337 $(mmrest-of-length MyCadenza)
3339 $(skip-of-length MyCadenza)
3354 @node Time administration
3355 @unnumberedsubsubsec Time administration
3357 @cindex time administration
3358 @cindex timing (within the score)
3359 @cindex music, unmetered
3360 @cindex unmetered music
3362 @funindex currentBarNumber
3363 @funindex measurePosition
3364 @funindex measureLength
3366 Time is administered by the @code{Timing_translator}, which by
3367 default is to be found in the @code{Score} context. An alias,
3368 @code{Timing}, is added to the context in which the
3369 @code{Timing_translator} is placed. To ensure that the
3370 @code{Timing} alias is available, you may need to explicitly
3371 instantiate the containing context (such as @code{Voice} or
3374 The following properties of @code{Timing} are used
3375 to keep track of timing within the score.
3378 @cindex measure number
3381 @item currentBarNumber
3382 The current measure number. For an example showing the
3383 use of this property see @ref{Bar numbers}.
3386 The length of the measures in the current time signature. For a
3387 4/4 time this is@tie{}1, and for 6/8 it is 3/4. Its value
3388 determines when bar lines are inserted and how automatic beams
3389 should be generated.
3391 @item measurePosition
3392 The point within the measure where we currently are. This
3393 quantity is reset by subtracting @code{measureLength} whenever
3394 @code{measureLength} is reached or exceeded. When that happens,
3395 @code{currentBarNumber} is incremented.
3398 If set to true, the above variables are updated for every time
3399 step. When set to false, the engraver stays in the current
3400 measure indefinitely.
3404 Timing can be changed by setting any of these variables
3405 explicitly. In the next example, the default 4/4 time
3406 signature is printed, but @code{measureLength} is set to 5/4.
3407 At 4/8 through the third measure, the @code{measurePosition} is
3408 advanced by 1/8 to 5/8, shortening that bar by 1/8.
3409 The next bar line then falls at 9/8 rather than 5/4.
3411 @lilypond[quote,verbatim]
3412 \new Voice \relative c' {
3413 \set Timing.measureLength = #(ly:make-moment 5 4)
3417 \set Timing.measurePosition = #(ly:make-moment 5 8)
3424 As the example illustrates, @code{ly:make-moment n m} constructs a
3425 duration of n/m of a whole note. For example,
3426 @code{ly:make-moment 1 8} is an eighth note duration and
3427 @code{ly:make-moment 7 16} is the duration of seven sixteenths
3434 @ref{Unmetered music}.
3439 Internals Reference:
3440 @rinternals{Timing_translator},