1 @c -*- coding: utf-8; mode: texinfo; documentlanguage: ja -*-
3 Translation of GIT committish: fabcd22c8f88ea9a87241597f1e48c0a9adbfc6e
5 When revising a translation, copy the HEAD committish of the
6 version that you are working on. For details, see the Contributors'
7 Guide, node Updating translation committishes..
12 @c Translators: Yoshiki Sawada
13 @c Translation status: post-GDP
17 @section キーボードと他の複数譜の楽器
18 @translationof Keyboard and other multi-staff instruments
20 @lilypondfile[quote]{keyboard-headword.ly}
22 このセクションでは、キーボード楽器と複数の譜を用いる他の楽器
25 キーボードを含む複数の譜を用いる楽器のグループ全体をまとめて
36 @subsection キーボードで共通の記譜法
37 @translationof Common notation for keyboards
39 このセクションでは多くのキーボードで生じる記譜の問題について説明します。
50 @unnumberedsubsubsec キーボードのためのリファレンス
51 @translationof References for keyboards
53 @cindex piano staves (ピアノ譜)
54 @cindex staves, piano (ピアノ譜)
55 @cindex staves, keyboard instruments (キーボード譜)
56 @cindex staves, keyed instruments (キーを持つ楽器の譜)
57 @cindex keyboard instrument staves (キーボード譜)
58 @cindex keyed instrument staves (キーを持つ楽器の譜)
59 @cindex keyboard music, centering dynamics (キーボード譜で強弱記号を中央に配置する)
60 @cindex dynamics, centered in keyboard music (キーボード譜で強弱記号を中央に配置する)
61 @cindex piano music, centering dynamics (ピアノ譜で強弱記号を中央に配置する)
62 @cindex centered dynamics in piano music (ピアノ譜で強弱記号を中央に配置する)
66 通常、キーボードはピアノ譜で記譜します。@c
67 これらは波括弧で括られた 2 つ以上の普通の譜です。@c
68 他のキーを持つ楽器も同じ記譜法を用います。@c
69 オルガン譜は通常、@code{PianoStaff} グループ内部にある 2 つの譜と、@c
72 キーボードの譜はそれぞれの独立性が高いですが、@c
73 ボイスが 2 つの譜を跨ぐこともあります。@c
74 このセクションではキーボードに特有の記譜テクニックについて説明します。
76 キーボードに共通する問題のいくつかは他の場所でカバーします:
80 @item 通常、キーボードは複数のボイスを持ち、@c
82 このことは @ref{衝突の解決} で説明しています。
84 @item @ref{音楽を並列に記述する} で説明しているように、@c
87 @item 強弱指示を 2 つの @code{Staff} コンテキストの間にある
88 @code{Dynamics} コンテキストの中に配置して、@c
89 強弱記号を 2 つの譜の間に配置することができます。@c
92 @item 運指は @ref{運指の指示} で説明しています。
94 @item オルガン ペダルの指示はアーティキュレーションとして挿入します。@c
95 @ref{List of articulations} を参照してください。
97 @item @ref{グリッド ライン} で垂直のグリッド ラインを表示させることができます。
99 @item キーボードはしばしばアルペジオでのタイや、@c
100 @notation{レセ ヴィブレ} タイを持ちます。@c
103 @item 複数のボイスや譜を跨ぐアルペジオの配置は、@c
104 @ref{アルペジオ} でカバーしています。
106 @item トレモロ記号は @ref{トレモロの繰り返し} で説明しています。
108 @item キーボードで必要となる可能性がある調整のいくつかを
109 @rlearning{実際の音楽からの例} で示しています。
111 @item ボイスを跨ぐタイを作り出すために隠れた音符を使うことがあります。@c
112 @rlearning{調整のその他の使用方法} で示しています。
117 @c @lilypondfile[verbatim,quote,texidoc,doctitle]
118 @c {forcing-visibility-of-systems-with-multi-bar-rests-when-using-\RemoveEmptyStaffContext.ly}
119 @c http://lsr.di.unimi.it/LSR/Item?u=1&id=312
123 @rlearning{Real music example},
124 @rlearning{Other uses for tweaks}
127 @ref{Grouping staves},
128 @ref{Instrument names},
129 @ref{Collision resolution},
130 @ref{Writing music in parallel},
131 @ref{Fingering instructions},
132 @ref{List of articulations},
136 @ref{Tremolo repeats}
139 @rinternals{PianoStaff}
146 @unnumberedsubsubsec 譜を手動で変更する
147 @translationof Changing staff manually
149 @cindex changing staff manually (譜を手動で変更する)
150 @cindex manual staff changes (手動の譜の変更)
151 @cindex staff changes, manual (手動の譜の変更)
152 @cindex cross-staff notes (譜を跨ぐ音符)
153 @cindex notes, cross-staff (譜を跨ぐ音符)
154 @cindex cross-staff beams (譜を跨ぐ連桁)
155 @cindex beams, cross-staff (譜を跨ぐ連桁)
159 以下のコマンドを用いて、ボイスの譜を手動で切り換えることができます:
162 \change Staff = @var{staffname}
166 文字列 @var{staffname} は譜の名前です。@c
167 このコマンドはボイスをカレント譜から @var{staffname} という譜に切り換えます。@c
168 @var{staffname} の一般的な値は @code{"up"} と @code{"down"}、@c
169 あるいは @code{"RH"} と @code{"LH"} です。
171 ボイスの切り換え先となる譜は、切り換え時点で存在している必要があります。@c
172 必要があれば、譜を @qq{残しておく} べきです。@c
173 @ref{Keeping contexts alive} を参照してください。
175 譜を跨ぐ音符には自動的に連桁が付けられます:
178 @lilypond[verbatim,quote]
182 \change Staff = "down"
186 \change Staff = "down"
190 \new Staff = "down" {
198 連桁を調整する必要がある場合、符幹の向きの変更を最初に行ってください。@c
199 連桁の位置は最も近い譜の中央から算出します。@c
200 連桁の調整の簡単な例が @rlearning{表記の重なりを修正する} にあります。
202 @cindex cross-staff collisions (譜を跨ぐボイスによる衝突)
203 @cindex collisions, cross-staff voices (譜を跨ぐボイスによる衝突)
205 ボイスが譜を跨ぐ時に、記譜要素の重なりが発生することがあります:
208 @lilypond[verbatim,quote]
212 % 譜を跨ぐボイスの中にある運指記号のためのスペースを作ります
213 \once\override DynamicLineSpanner.staff-padding = #3.4
217 \new Staff = "down" <<
220 s4. e,8\rest g,2\rest
232 符幹とスラーは譜の間にある強弱記号と重なります。@c
233 なぜなら、異なる譜にある音符を結ぶ連桁、スラー、他のスパナに対して、@c
236 譜を跨ぐスパナによって配置に影響を受ける@c
237 符幹やアーティキュレーションに対しても、@c
239 そのような場合、必要に応じて、手動で衝突を解決する必要があります
240 -- 解決手段は @rlearning{表記の重なりを修正する} を参照してください。
244 @rlearning{Fixing overlapping notation}
248 @ref{Automatic beams},
249 @ref{Keeping contexts alive}
256 @rinternals{ContextChange}
259 譜の変更の直前に終了する自動連桁に対して、@c
261 衝突回避を行うには、手動連桁を使用してください。
265 @unnumberedsubsubsec 譜を自動で変更する
266 @translationof Changing staff automatically
268 @cindex changing staff automatically (譜を自動で変更する)
269 @cindex automatic staff changes (譜の自動変更)
270 @cindex staff changes, automatic (譜の自動変更)
272 @funindex \autochange
275 譜の上端と下端の間で、ボイスを自動的に切り換えることができます。@c
279 \autochange @dots{}@var{music}@dots{}
283 これはカレントの譜グループ (普通は、@code{PianoStaff}) 内部に
284 @code{"up"} と @code{"down"} という 2 つの譜を作成します。@c
285 デフォルトで下の譜は低音部となります。@c
286 自動変更は基準ピッチ (ミドル C が切り換えポイントです) で譜を切り換え、@c
287 次の切り換えまで休符でスキップしていきます。
289 @lilypond[quote,verbatim]
298 @cindex relative music and autochange (相対モードと自動変更)
299 @cindex autochange and relative music (自動変更と相対モード)
303 @code{\autochange} の外側にある @code{\relative} セクションは、@c
304 @code{\autochange} の内部にある音符のピッチに影響を与えません。@c
305 そのため、必要に応じて @code{\autochange} の内部に @code{\relative} を@c
308 個々の譜に個別の制御を行う必要がある場合、@c
309 手動で @code{"up"} と @code{"down"} という名前の譜を作成して、@c
311 @code{\autochange} コマンドは、作成された譜間で、@c
314 @warning{譜を手動で作成する場合、譜の名前を @code{"up"} と @code{"down"}
317 例えば、下の譜に調号を配置するには、譜を手動で作成する必要があります:
319 @lilypond[quote,verbatim]
322 \new Voice = "melOne" {
324 \autochange \relative {
330 \new Staff = "down" {
339 @ref{Changing staff manually}
345 @rinternals{AutoChangeMusic}
349 @cindex chords, splitting across staves with \autochange
351 譜の切り換えが最適な場所で行われない場合もあります。@c
352 高品位の出力を得るには、譜の切り換えを手動で指定する必要があります。
355 和音構造の中にある最初の音符に基づく譜に割り当てられます。
359 @unnumberedsubsubsec 譜変更線
360 @translationof Staff-change lines
362 @cindex staff-change line (譜変更線)
363 @cindex staff change line (譜変更線)
364 @cindex cross-staff line (譜跨ぎ線)
365 @cindex cross staff line (譜跨ぎ線)
366 @cindex line, staff-change follower (譜変更フォロー線)
367 @cindex line, cross-staff (譜跨ぎ線)
368 @cindex line, staff-change (譜変更線)
369 @cindex follow voice (フォロー ボイス)
370 @cindex voice, following (フォロー ボイス)
371 @cindex staff switching (譜の切り換え)
372 @cindex cross-staff (譜跨ぎ)
374 @funindex followVoice
375 @funindex \showStaffSwitch
376 @funindex \hideStaffSwitch
378 ボイスが他の譜に切り替わる時に、音符を繋げる線を自動的に譜刻することができます:
380 @lilypond[quote,verbatim]
385 \change Staff = "two"
397 @code{\showStaffSwitch},
398 @code{\hideStaffSwitch}
406 @rinternals{Note_head_line_engraver},
407 @rinternals{VoiceFollower}
411 @unnumberedsubsubsec 譜を跨ぐ符幹
412 @translationof Cross-staff stems
414 @cindex cross-staff notes (譜を跨ぐ音符)
415 @cindex cross staff notes (譜を跨ぐ音符)
416 @cindex notes, cross-staff (譜を跨ぐ音符)
417 @cindex cross-staff stems (譜を跨ぐ符幹)
418 @cindex cross staff stems (譜を跨ぐ符幹)
419 @cindex stems, cross-staff (譜を跨ぐ符幹)
420 @cindex chords, cross-staff (譜を跨ぐ和音)
421 @cindex cross-staff chords (譜を跨ぐ和音)
422 @cindex cross staff chords (譜を跨ぐ和音)
424 @funindex \crossStaff
425 @funindex \autoBeamOff
426 @funindex Span_stem_engraver
428 @code{Span_stem_engraver} を用いて譜を跨ぐ和音を作ることができます。@c
429 片方の譜の音符に自動連桁機能が連桁を付けないことを間違いなく確認する@c
432 @lilypondfile[verbatim,quote]
433 {cross-staff-stems.ly}
435 このエングラーバは、名前をダブル クォートで囲っても指定することが@c
436 できませんが、名前の前にハッシュ記号 @code{#} を置くことで指定できます。
439 @lilypondfile[verbatim,quote,texidoc,doctitle]
440 {indicating-cross-staff-chords-with-arpeggio-bracket.ly}
454 このセクションでは、ピアノに関係する記譜法を説明します。
461 @unnumberedsubsubsec ピアノ ペダル
462 @translationof Piano pedals
464 @cindex piano pedals (ピアノ ペダル)
465 @cindex pedals, piano (ピアノ ペダル)
466 @cindex sustain pedal (サステイン ペダル)
467 @cindex pedal, sustain (サステイン ペダル)
468 @cindex sostenuto pedal (ソステヌート ペダル)
469 @cindex pedal, sostenuto (ソステヌート ペダル)
470 @cindex una corda (ウナ コルダ)
471 @cindex tre corde (トレ コルデ)
476 @funindex \sustainOff
477 @funindex \sostenutoOn
478 @funindex \sostenutoOff
482 一般的に、ピアノは音を変化させるために 3 本のペダルを持ちます:
483 @notation{サステイン}, @notation{ソステヌート} (@notation{sos.}),
484 それに @notation{ウナ コルダ} (@notation{una corda}, @notation{U.C.}) です。@c
485 サステイン ペダルは、ビブラフォンやチェレスタにもあります。
487 @lilypond[quote,verbatim]
491 c4\sostenutoOn e g c,
492 <bes d f>1\sostenutoOff
498 @cindex pedal indication styles (ペダル指示スタイル)
499 @cindex pedal indication, text (ペダル指示テキスト)
500 @cindex pedal indication, bracket (ペダル指示の囲み)
501 @cindex pedal indication, mixed (混合ペダル指示)
502 @cindex pedal sustain style (ペダル サステイン スタイル)
503 @cindex sustain pedal style (サステイン ペダル スタイル)
505 @funindex pedalSustainStyle
510 ペダル指示には 3 つのスタイルがあります:
511 テキスト、囲み、それにテキストと囲みの混合です。@c
513 サステイン ペダルとウナ コルダ ペダルの指示はテキスト スタイルですが、@c
514 ソステヌート ペダル指示は混合スタイルです。
516 @lilypond[quote,verbatim]
518 c''4\sustainOn g c2\sustainOff
519 \set Staff.pedalSustainStyle = #'mixed
521 d\sustainOff\sustainOn g, c2\sustainOff
522 \set Staff.pedalSustainStyle = #'bracket
524 d\sustainOff\sustainOn g, c2
530 ピアノ演奏中の物理的なサステイン ペダルの動きに一致します。@c
532 最後のペダル オフ コマンドを省略することで挿入されます。
534 ペダル指示を @code{Dynamics} コンテキストに配置させることができます。
544 @rinternals{SustainPedal},
545 @rinternals{SustainPedalLineSpanner},
546 @rinternals{SustainEvent},
547 @rinternals{SostenutoPedal},
548 @rinternals{SostenutoPedalLineSpanner},
549 @rinternals{SostenutoEvent},
550 @rinternals{UnaCordaPedal},
551 @rinternals{UnaCordaPedalLineSpanner},
552 @rinternals{UnaCordaEvent},
553 @rinternals{PianoPedalBracket},
554 @rinternals{Piano_pedal_engraver}
559 @translationof Accordion
561 @cindex accordion (アコーディオン)
563 このセクションでは、アコーディオンに特有の記譜法について説明します。
570 @unnumberedsubsubsec ディスカント記号
571 @translationof Discant symbols
573 @cindex accordion discant symbols (アコーディオンのディスカント記号)
574 @cindex discant symbols, accordion (アコーディオンのディスカント記号)
575 @cindex accordion shifts (アコーディオン シフト)
576 @cindex accordion shift symbols (アコーディオンのシフト記号)
579 指定されたピッチよりも 1 オクターブ上または下のピッチとユニゾンになる@c
582 さまざまなリードの組み合わせを選択する @notation{シフト} に@c
584 @notation{oboe}, @notation{musette}, あるいは @notation{bandonium} などです。@c
585 そのため、演奏指示を単純にするための記号システムを用います。
589 @lilypondfile[verbatim,quote,texidoc,doctitle]
590 {accordion-discant-symbols.ly}
601 このセクションでは、ハープに特有の記譜法について説明します。
609 @unnumberedsubsubsec ハープのためのリファレンス
610 @translationof References for harps
613 @cindex bisbiglando (ビズビッリャンド)
615 ハープ音楽に共通する特性のいくつかが、他の場所でカバーされています:
619 @item グリッサンドは最も特徴的なハープのテクニックです
622 @item @notation{ビズビッリャンド} (@notation{bisbigliando}) は@c
626 @item ナチュラル ハーモニクスは @ref{ハーモニクス} でカバーされています。
628 @item アルペジオの向きと非アルペジオについては、@c
629 @ref{アルペジオ} を参照してください。
635 @ref{Tremolo repeats},
642 @unnumberedsubsubsec ハープ ペダル
643 @translationof Harp pedals
645 @cindex harp pedals (ハープ ペダル)
646 @cindex harp pedal diagrams (ハープ ペダル ダイアグラム)
647 @cindex pedals, harp (ハープ ペダル)
648 @cindex pedal diagrams, harp (ハープ ペダル ダイアグラム)
650 ハープはオクターブ毎に 7 本の弦を持ち、@c
651 それらはナチュラル ピッチ、フラット ピッチ、あるいはシャープ ピッチの@c
653 レバー ハープは各弦を個別に調整することができますが、@c
654 ペダル ハープは 1 つのペダルで同じピッチ名を持つすべての弦を制御します。@c
655 演奏者の左から右に向かって、左のペダル D, C, それに B、@c
656 右のペダルは E, F, G, それに A です。@c
657 ペダルのポジションをテキスト記号で指示することがあります:
659 @lilypond[quote,verbatim,fragment]
661 cis''1_\markup \concat \vcenter {
662 [D \flat C \sharp B|E \sharp F \sharp G A \flat] }
663 c''!1_\markup \concat \vcenter {
667 あるいはペダル ダイアグラムで指示することもあります:
669 @lilypond[quote,verbatim,fragment]
671 cis''1_\markup { \harp-pedal #"^v-|vv-^" }
672 c''!1_\markup { \harp-pedal #"^o--|vv-^" }
675 @code{\harp-pedal} コマンドは文字列を受け取ります。@c
676 @code{^} はペダル ポジションを上 (フラット ピッチ)、@c
677 @code{-} はペダル ポジションを真ん中 (ナチュラル ピッチ)、@c
678 @code{v} はペダル ポジションを下 (シャープ ピッチ)、@c
680 接頭辞 @code{o} は、その後のペダル記号を丸で囲みます。
685 @ref{Instrument Specific Markup}