keyboard/hhkb_rn42/rn42/rn42.c

   1 #include <avr/io.h>
   2 #include "host.h"
   3 #include "host_driver.h"
   4 #include "serial.h"
   5 #include "rn42.h"
   6 #include "print.h"
   7 #include "wait.h"
   8
   9
  10 /* Host driver */
  11 static uint8_t keyboard_leds(void);
  12 static void send_keyboard(report_keyboard_t *report);
  13 static void send_mouse(report_mouse_t *report);
  14 static void send_system(uint16_t data);
  15 static void send_consumer(uint16_t data);
  16
  17 host_driver_t rn42_driver = {
  18     keyboard_leds,
  19     send_keyboard,
  20     send_mouse,
  21     send_system,
  22     send_consumer
  23 };
  24
  25
  26 void rn42_init(void)
  27 {
  28     // JTAG disable for PORT F. write JTD bit twice within four cycles.
  29     MCUCR |= (1<<JTD);
  30     MCUCR |= (1<<JTD);
  31
  32     // PF7: BT connection control(high: connect, low: disconnect)
  33     rn42_autoconnect();
  34
  35     // PF6: linked(input without pull-up)
  36     DDRF  &= ~(1<<6);
  37     PORTF |=  (1<<6);
  38
  39     // PF1: RTS(low: allowed to send, high: not allowed)
  40     DDRF &= ~(1<<1);
  41     PORTF &= ~(1<<1);
  42
  43     // PD5: CTS(low: allow to send, high:not allow)
  44     DDRD |= (1<<5);
  45     PORTD &= ~(1<<5);
  46
  47     serial_init();
  48 }
  49
  50 void rn42_putc(uint8_t c)
  51 {
  52     serial_send(c);
  53 }
  54
  55 bool rn42_autoconnecting(void)
  56 {
  57     // GPIO6 for control connection(high: auto connect, low: disconnect)
  58     // Note that this needs config: SM,4(Auto-Connect DTR Mode)
  59     return (PORTF & (1<<7) ? true : false);
  60 }
  61
  62 void rn42_autoconnect(void)
  63 {
  64     // hi to auto connect
  65     DDRF |= (1<<7);
  66     PORTF |= (1<<7);
  67 }
  68
  69 void rn42_disconnect(void)
  70 {
  71     // low to disconnect
  72     DDRF |= (1<<7);
  73     PORTF &= ~(1<<7);
  74 }
  75
  76 bool rn42_rts(void)
  77 {
  78     // low when RN-42 is powered and ready to receive
  79     return PINF&(1<<1);
  80 }
  81
  82 void rn42_cts_hi(void)
  83 {
  84     // not allow to send
  85     PORTD |= (1<<5);
  86 }
  87
  88 void rn42_cts_lo(void)
  89 {
  90     // allow to send
  91     PORTD &= ~(1<<5);
  92 }
  93
  94 bool rn42_linked(void)
  95 {
  96     // RN-42 GPIO2
  97     //   Hi-Z:  Not powered
  98     //   High:  Linked
  99     //   Low:   Connecting
 100     return !rn42_rts() && PINF&(1<<6);
 101 }
 102
 103
 104 static uint8_t keyboard_leds(void) { return 0; }
 105
 106 static void send_keyboard(report_keyboard_t *report)
 107 {
 108     // wake from deep sleep
 109 /*
 110     PORTD |= (1<<5);    // high
 111     wait_ms(5);
 112     PORTD &= ~(1<<5);   // low
 113 */
 114
 115     serial_send(0xFD);  // Raw report mode
 116     serial_send(9);     // length
 117     serial_send(1);     // descriptor type
 118     serial_send(report->mods);
 119     serial_send(0x00);
 120     serial_send(report->keys[0]);
 121     serial_send(report->keys[1]);
 122     serial_send(report->keys[2]);
 123     serial_send(report->keys[3]);
 124     serial_send(report->keys[4]);
 125     serial_send(report->keys[5]);
 126 }
 127
 128 static void send_mouse(report_mouse_t *report)
 129 {
 130     // wake from deep sleep
 131 /*
 132     PORTD |= (1<<5);    // high
 133     wait_ms(5);
 134     PORTD &= ~(1<<5);   // low
 135 */
 136
 137     serial_send(0xFD);  // Raw report mode
 138     serial_send(5);     // length
 139     serial_send(2);     // descriptor type
 140     serial_send(report->buttons);
 141     serial_send(report->x);
 142     serial_send(report->y);
 143     serial_send(report->v);
 144 }
 145
 146 static void send_system(uint16_t data)
 147 {
 148     // Table 5-6 of RN-BT-DATA-UB
 149     // 81,82,83 scan codes can be used?
 150 }
 151
 152
 153 static uint16_t usage2bits(uint16_t usage)
 154 {
 155     switch (usage) {
 156         case AC_HOME:               return 0x01;
 157         case AL_EMAIL:              return 0x02;
 158         case AC_SEARCH:             return 0x04;
 159         //case AL_KBD_LAYOUT:         return 0x08;  // Apple virtual keybaord toggle
 160         case AUDIO_VOL_UP:          return 0x10;
 161         case AUDIO_VOL_DOWN:        return 0x20;
 162         case AUDIO_MUTE:            return 0x40;
 163         case TRANSPORT_PLAY_PAUSE:  return 0x80;
 164         case TRANSPORT_NEXT_TRACK:  return 0x100;
 165         case TRANSPORT_PREV_TRACK:  return 0x200;
 166         case TRANSPORT_STOP:        return 0x400;
 167         case TRANSPORT_STOP_EJECT:  return 0x800;
 168         //case return 0x1000;   // Fast forward
 169         //case return 0x2000;   // Rewind
 170         //case return 0x4000;   // Stop/eject
 171         //case return 0x8000;   // Internet browser
 172     };
 173     return 0;
 174 }
 175
 176 static void send_consumer(uint16_t data)
 177 {
 178     uint16_t bits = usage2bits(data);
 179     serial_send(0xFD);  // Raw report mode
 180     serial_send(3);     // length
 181     serial_send(3);     // descriptor type
 182     serial_send(bits&0xFF);
 183     serial_send((bits>>8)&0xFF);
 184 }
 185
 186
 187 /* Null driver for config_mode */
 188 static uint8_t config_keyboard_leds(void);
 189 static void config_send_keyboard(report_keyboard_t *report);
 190 static void config_send_mouse(report_mouse_t *report);
 191 static void config_send_system(uint16_t data);
 192 static void config_send_consumer(uint16_t data);
 193
 194 host_driver_t rn42_config_driver = {
 195     config_keyboard_leds,
 196     config_send_keyboard,
 197     config_send_mouse,
 198     config_send_system,
 199     config_send_consumer
 200 };
 201
 202 static uint8_t config_keyboard_leds(void) { return 0; }
 203 static void config_send_keyboard(report_keyboard_t *report) {}
 204 static void config_send_mouse(report_mouse_t *report) {}
 205 static void config_send_system(uint16_t data) {}
 206 static void config_send_consumer(uint16_t data) {}