OPT_DEFS += -DNKRO_ENABLE
endif
+ifdef MIDI_ENABLE
+ OPT_DEFS += -DMIDI_ENABLE
+endif
+
ifdef USB_6KRO_ENABLE
OPT_DEFS += -DUSB_6KRO_ENABLE
endif
-Planck keyboard firmware
+Atomic keyboard firmware
======================
-DIY/Assembled compact ortholinear 40% keyboard by [Ortholinear Keyboards](http://ortholinearkeyboards.com).
+DIY/Assembled ortholinear 60% keyboard by [Ortholinear Keyboards](http://ortholinearkeyboards.com).
## Extended Keymap
-If you include extended_keymap_common.h instead of keymap_common.h at the top of your file, you'll have access to a bunch of goodies:
+If you include extended_keymap_common.h instead of keymap_common.h at the top of your file, you'll have access to a bunch of goodies:t
- Use `LSFT()`, `LCTL()`, et. al. (listed in extended_keymap_common.h) as modifiers for keys (daisy-chain-able)
- Use `FUNC(1)` instead of `FN1` (etc.) to access the function layers beyond the 32 function layer limit
--- /dev/null
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+# Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+# (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+# have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+# have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+# (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+# (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+# with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+# bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = atomic_lufa
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# project specific files
+SRC = keymap_common.c \
+ matrix.c \
+ led.c
+
+ifdef KEYMAP
+ SRC := keymap_$(KEYMAP).c $(SRC)
+else
+ SRC := keymap_vlad.c $(SRC)
+endif
+
+CONFIG_H = config.h
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
+
+
+# Optimize size but this may cause error "relocation truncated to fit"
+#EXTRALDFLAGS = -Wl,--relax
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
+include $(TOP_DIR)/protocol/lufa.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
--- /dev/null
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+# Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+# (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+# have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+# have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+# (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+# (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+# with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+# bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = gh60_pjrc
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# project specific files
+SRC = keymap_common.c \
+ matrix.c \
+ led.c
+
+ifdef KEYMAP
+ SRC := keymap_$(KEYMAP).c $(SRC)
+else
+ SRC := keymap_poker.c $(SRC)
+endif
+
+CONFIG_H = config.h
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+MCU = atmega32u4
+#MCU = at90usb1286
+
+
+# Processor frequency.
+# Normally the first thing your program should do is set the clock prescaler,
+# so your program will run at the correct speed. You should also set this
+# variable to same clock speed. The _delay_ms() macro uses this, and many
+# examples use this variable to calculate timings. Do not add a "UL" here.
+F_CPU = 16000000
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+5000)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+600)
+CONSOLE_ENABLE = yes # Console for debug
+COMMAND_ENABLE = yes # Commands for debug and configuration
+SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes # USB Nkey Rollover(+500)
+#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
+include $(TOP_DIR)/protocol/pjrc.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
+
+plain: OPT_DEFS += -DKEYMAP_PLAIN
+plain: all
+
+poker: OPT_DEFS += -DKEYMAP_POKER
+poker: all
+
+poker_set: OPT_DEFS += -DKEYMAP_POKER_SET
+poker_set: all
+
+poker_bit: OPT_DEFS += -DKEYMAP_POKER_BIT
+poker_bit: all
--- /dev/null
+GH60 keyboard firmware
+======================
+DIY compact keyboard designed and run by komar007 and Geekhack community.
+
+- Both Rev.A and Rev.B PCB are supported by one firmware binary(issue #64)
+
+## GH60 Resources
+- [KOMAR's project page](http://blog.komar.be/projects/gh60-programmable-keyboard/)
+- [Prototyping](http://geekhack.org/index.php?topic=34959.0)
+- [Rev.A PCB test](http://geekhack.org/index.php?topic=37570.0)
+- [Rev.B PCB test](http://geekhack.org/index.php?topic=50685.0)
+- [Group buy](http://geekhack.org/index.php?topic=41464.0)
+
+
+## Build
+Move to this directory then just run `make` like:
+
+ $ make
+
+Use `make -f Makefile.pjrc` if you want to use PJRC stack but I find no reason to do so now.
+
+
+## Keymap
+Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `keymap_<name>.c` and see keymap document(you can find in top README.md) and existent keymap files.
+
+To build firmware binary hex file with a certain keymap just do `make` with `KEYMAP` option like:
+
+ $ make KEYMAP=[poker|poker_set|poker_bit|plain|hasu|spacefn|hhkb|<name>]
+
+
+### 1 Poker
+[keymap_poker.c](keymap_poker.c) emulates original Poker layers
+while both [keymap_poker_bit.c](keymap_poker_bit.c) and [keymap_poker_set.c](keymap_poker_set.c) implements same layout in different way and they fix a minor issue of original Poker and enhance arrow keys.
+
+ Fn + Esc = `
+ Fn + {left, down, up, right} = {home, pgdown, pgup, end}
+
+#### 1.0 Default layer
+ ,-----------------------------------------------------------.
+ | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp |
+ |-----------------------------------------------------------|
+ |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \|
+ |-----------------------------------------------------------|
+ |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return |
+ |-----------------------------------------------------------|
+ |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |
+ |-----------------------------------------------------------|
+ |Ctrl|Gui |Alt | Space |Fn |Gui |App |Ctrl|
+ `-----------------------------------------------------------'
+#### 1.1 Poker Fn layer
+ ,-----------------------------------------------------------.
+ |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| |
+ |-----------------------------------------------------------|
+ | |FnQ| Up| | | | | | |Cal| |Hom|Ins| |
+ |-----------------------------------------------------------|
+ | |Lef|Dow|Rig| | |Psc|Slk|Pau| |Tsk|End| |
+ |-----------------------------------------------------------|
+ | |Del| |Web|Mut|VoU|VoD| |PgU|PgD|Del| Up |
+ |-----------------------------------------------------------|
+ | | | | FnS |Fn |Left|Down|Righ|
+ `-----------------------------------------------------------'
+
+
+### 2. Plain
+Without any Fn layer this will be useful if you want to use key remapping tool like AHK on host.
+See [keymap_plain.c](keymap_plain.c) for detail.
+
+#### 1.0 Plain Default layer
+ ,-----------------------------------------------------------.
+ |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp |
+ |-----------------------------------------------------------|
+ |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \|
+ |-----------------------------------------------------------|
+ |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return |
+ |-----------------------------------------------------------|
+ |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |
+ |-----------------------------------------------------------|
+ |Ctrl|Gui |Alt | Space |Alt |Gui |App |Ctrl|
+ `-----------------------------------------------------------'
+
+
+### 3. Hasu
+This is my favorite keymap with HHKB Fn, Vi cursor and Mousekey layer. See [keymap_hasu.c](keymap_hasu.c) for detail.
+
+
+### 4. SpaceFN
+This layout proposed by spiceBar uses space bar to change layer with using Dual role key technique. See [keymap_spacefn.c](keymap_spacefn.c) and [SpaceFN discussion](http://geekhack.org/index.php?topic=51069.0).
+
+#### 4.0 Default layer
+ ,-----------------------------------------------------------.
+ |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp |
+ |-----------------------------------------------------------|
+ |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \|
+ |-----------------------------------------------------------|
+ |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return |
+ |-----------------------------------------------------------|
+ |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |
+ |-----------------------------------------------------------|
+ |Ctrl|Gui |Alt | Space/Fn |Alt |Gui |App |Ctrl|
+ `-----------------------------------------------------------'
+#### 4.1 SpaceFN layer
+ ,-----------------------------------------------------------.
+ |` | F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete |
+ |-----------------------------------------------------------|
+ | | | | | | | |Hom|Up |End|Psc|Slk|Pau|Ins |
+ |-----------------------------------------------------------|
+ | | | | | | |PgU|Lef|Dow|Rig| | | |
+ |-----------------------------------------------------------|
+ | | | | | |Spc|PgD|` |~ | | | |
+ |-----------------------------------------------------------|
+ | | | | Fn | | | | |
+ `-----------------------------------------------------------'
+
+
+### 5. HHKB
+[keymap_hhkb.c](keymap_hhkb.c) emulates original HHKB layers.
+#### 5.0: Default layer
+ ,-----------------------------------------------------------.
+ |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| `|
+ |-----------------------------------------------------------|
+ |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]|Bspc |
+ |-----------------------------------------------------------|
+ |Ctrl | A| S| D| F| G| H| J| K| L|Fn3| '|Return |
+ |-----------------------------------------------------------|
+ |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |Fn |
+ |-----------------------------------------------------------|
+ | |Gui |Alt | Space | |Alt |Gui | |
+ `-----------------------------------------------------------'
+#### 5.1: HHKB Fn layer
+ ,-----------------------------------------------------------.
+ |Pwr| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
+ |-----------------------------------------------------------|
+ |Caps | | | | | | | |Psc|Slk|Pus|Up | | |
+ |-----------------------------------------------------------|
+ | |VoD|VoU|Mut|Ejc| | *| /|Hom|PgU|Lef|Rig|Enter |
+ |-----------------------------------------------------------|
+ | | | | | | | +| -|End|PgD|Dow| | |
+ |-----------------------------------------------------------|
+ | | | | | | | | |
+ `-----------------------------------------------------------'
+
--- /dev/null
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6060
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Ortholinear Keyboards
+#define PRODUCT Atomic Keyboard
+#define DESCRIPTION t.m.k. keyboard firmware for Atomic
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
--- /dev/null
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "keymap_common.h"
+
+
+/* translates key to keycode */
+uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key)
+{
+ return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]);
+}
+
+/* translates Fn keycode to action */
+action_t keymap_fn_to_action(uint8_t keycode)
+{
+ return (action_t){ .code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]) };
+}
--- /dev/null
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+#ifndef KEYMAP_COMMON_H
+#define KEYMAP_COMMON_H
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/pgmspace.h>
+#include "keycode.h"
+#include "action.h"
+#include "action_macro.h"
+#include "report.h"
+#include "host.h"
+#include "print.h"
+#include "debug.h"
+#include "keymap.h"
+
+
+extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS];
+extern const uint16_t fn_actions[];
+
+// JCK: Semi-Standard layout
+#define KEYMAP_JCK( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0E, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, K2E, \
+ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3C, K3D, K3E, \
+ K40, K41, K43, K46, K4A, K4B, K4C, K4D, K4E \
+) { \
+ { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_NO, KC_##K0E }, \
+ { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E }, \
+ { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_NO, KC_##K2D, KC_##K2E }, \
+ { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_NO, KC_##K3C, KC_##K3D, KC_##K3E }, \
+ { KC_##K40, KC_##K41, KC_NO, KC_##K43, KC_NO, KC_NO, KC_##K46, KC_NO, KC_NO, KC_NO, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E } \
+}
+
+// ASK: Short Space layout
+#define KEYMAP_ASK_MESSY( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0E, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, K2E, \
+ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3C, K3D, K3E, \
+ K40, K41, K43, K44, K46, K48, K49, K4A, K4B, K4C, K4D, K4E \
+) { \
+ { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_NO, KC_##K0E }, \
+ { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E }, \
+ { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_NO, KC_##K2D, KC_##K2E }, \
+ { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_NO, KC_##K3C, KC_##K3D, KC_##K3E }, \
+ { KC_##K40, KC_##K41, KC_NO, KC_##K43, KC_##K44, KC_NO, KC_##K46, KC_NO, KC_##K48, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E } \
+}
+
+#define KEYMAP_ASK( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0E, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2E, \
+ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3E, \
+ K40, K41, K43, K44, K46, K47, K48, K4A, K4B, K4C, K4D, K4E \
+) { \
+ { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_NO, KC_##K0E }, \
+ { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E }, \
+ { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_NO, KC_##K2E }, \
+ { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_NO, KC_##K3D, KC_##K3E }, \
+ { KC_##K40, KC_##K41, KC_NO, KC_##K43, KC_##K44, KC_NO, KC_##K46, KC_##K47, KC_##K48, KC_NO, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E } \
+}
+
+
+// MLO: Semi-Grid layout
+
+// KLN: Grid layout
+
+// PKR: Standard layout
+
+#endif
--- /dev/null
+#include "keymap_common.h"
+
+// JCK: Semi-Standard layout
+
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* 0: qwerty */
+ [0] = KEYMAP_JCK(GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, BSPC, \
+ TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, BSLS, DEL, \
+ ESC, A, S, D, F, G, H, J, K, L, SCLN, QUOT, ENT, MPLY, \
+ LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT, VOLD, VOLU, \
+ LCTL, LALT, LGUI, SPC, FN1, LEFT, DOWN, UP, RGHT),
+ [1] = KEYMAP_JCK(GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, BSPC, \
+ TAB, Q, W, F, P, G, J, L, U, Y, SCLN, LBRC, RBRC, BSLS, DEL, \
+ ESC, A, R, S, T, D, H, N, E, I, O, QUOT, ENT, MPLY, \
+ LSFT, Z, X, C, V, B, K, M, COMM, DOT, SLSH, RSFT, VOLD, VOLU, \
+ LCTL, LALT, LGUI, SPC, FN1, LEFT, DOWN, UP, RGHT),
+ [2] = KEYMAP_JCK(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, BSPC, \
+ TAB, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, LBRC, RBRC, BSLS, DEL, \
+ ESC, FN3, FN4, TRNS, TRNS, TRNS, TRNS, MINS, EQL, LBRC, RBRC, BSLS, ENT, MPLY, \
+ LSFT, FN9, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT, VOLD, VOLU, \
+ LCTL, LALT, LGUI, SPC, TRNS, MNXT, VOLD, VOLU, MPLY),
+};
+const uint16_t PROGMEM fn_actions[] = {
+ [1] = ACTION_LAYER_MOMENTARY(2), // to Fn overlay
+ [3] = ACTION_DEFAULT_LAYER_SET(0),
+ [4] = ACTION_DEFAULT_LAYER_SET(1),
+
+ [9] = ACTION_MODS_KEY(MOD_LSFT | MOD_RSFT, KC_PAUSE),
+
+ [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1),
+ [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2),
+ [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3),
+ [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4),
+ [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5),
+ [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6),
+ [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7),
+ [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8),
+ [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9),
+ [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0),
+ [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS),
+ [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL),
+ [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV),
+ [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC),
+ [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC),
+ [28] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS),
+};
--- /dev/null
+#include "keymap_common.h"
+
+// JCK: Semi-Standard layout
+
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* 0: qwerty */
+ [0] = KEYMAP_JCK(GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, BSPC, \
+ TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, BSLS, PSCR, \
+ CAPS, A, S, D, F, G, H, J, K, L, SCLN, QUOT, ENT, INS, \
+ LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT, UP, DEL, \
+ LCTL, LGUI, LALT, SPC, RALT, RCTL, LEFT, DOWN, RGHT)
+};
+const uint16_t PROGMEM fn_actions[] = {
+};
+
--- /dev/null
+#include "keymap_common.h"
+
+// JCK: Semi-Standard layout
+
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* 0: qwerty */
+ [0] = KEYMAP_ASK(GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, BSPC, \
+ TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, BSLS, DEL, \
+ CAPS, A, S, D, F, G, H, J, K, L, SCLN, QUOT, ENT, VOLU, \
+ LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT, UP, VOLD, \
+ LCTL, LGUI, LALT, LGUI, SPC, RGUI, RALT, RGUI, RCTL, LEFT, DOWN, RGHT)
+};
+const uint16_t PROGMEM fn_actions[] = {
+};
\ No newline at end of file
--- /dev/null
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <avr/io.h>
+#include "stdint.h"
+#include "led.h"
+
+
+void led_set(uint8_t usb_led)
+{
+}
--- /dev/null
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * scan matrix
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "action_layer.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+
+
+#ifndef DEBOUNCE
+# define DEBOUNCE 10
+#endif
+static uint8_t debouncing = DEBOUNCE;
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+static matrix_row_t read_cols(void);
+static void init_cols(void);
+static void unselect_rows(void);
+static void select_row(uint8_t row);
+
+
+inline
+uint8_t matrix_rows(void)
+{
+ return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+ return MATRIX_COLS;
+}
+
+
+void matrix_init(void)
+{
+ // initialize row and col
+ unselect_rows();
+ init_cols();
+
+ // initialize matrix state: all keys off
+ for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+ matrix[i] = 0;
+ matrix_debouncing[i] = 0;
+ }
+}
+
+uint8_t matrix_scan(void)
+{
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ select_row(i);
+ _delay_us(30); // without this wait read unstable value.
+ matrix_row_t cols = read_cols();
+ if (matrix_debouncing[i] != cols) {
+ matrix_debouncing[i] = cols;
+ if (debouncing) {
+ debug("bounce!: "); debug_hex(debouncing); debug("\n");
+ }
+ debouncing = DEBOUNCE;
+ }
+ unselect_rows();
+ }
+
+ if (debouncing) {
+ if (--debouncing) {
+ _delay_ms(1);
+ } else {
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ matrix[i] = matrix_debouncing[i];
+ }
+ }
+ }
+
+
+ return 1;
+}
+
+bool matrix_is_modified(void)
+{
+ if (debouncing) return false;
+ return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+ return (matrix[row] & ((matrix_row_t)1<<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+ return matrix[row];
+}
+
+void matrix_print(void)
+{
+ print("\nr/c 0123456789ABCDEF\n");
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ phex(row); print(": ");
+ pbin_reverse16(matrix_get_row(row));
+ print("\n");
+ }
+}
+
+uint8_t matrix_key_count(void)
+{
+ uint8_t count = 0;
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ count += bitpop16(matrix[i]);
+ }
+ return count;
+}
+
+/* Column pin configuration
+ * col: 0 1 2 3 4 5 6 7 8 9 10 11
+ * pin: F0 F1 F4 F5 F6 F7 B6 B5 B4 D7 D5 D4
+ */
+
+static void init_cols(void)
+{
+ DDRC &= ~(1<<6 | 1<<7);
+ PORTC |= (1<<6 | 1<<7);
+ DDRD &= ~(1<<4 | 1<<5 | 1<<6 | 1<<7);
+ PORTD |= (1<<4 | 1<<5 | 1<<6 | 1<<7);
+ DDRB &= ~(1<<4 | 1<<5 | 1<<6);
+ PORTB |= (1<<4 | 1<<5 | 1<<6);
+ DDRF &= ~(1<<0 | 1<<1 | 1<<4 | 1<<5 | 1<<6 | 1<<7);
+ PORTF |= (1<<0 | 1<<1 | 1<<4 | 1<<5 | 1<<6 | 1<<7);
+}
+
+static matrix_row_t read_cols(void)
+{
+ return (PINC&(1<<6) ? 0 : (1<< 0)) |
+ (PINC&(1<<7) ? 0 : (1<< 1)) |
+ (PIND&(1<<5) ? 0 : (1<< 2)) |
+ (PIND&(1<<4) ? 0 : (1<< 3)) |
+ (PIND&(1<<6) ? 0 : (1<< 4)) |
+ (PIND&(1<<7) ? 0 : (1<< 5)) |
+ (PINB&(1<<4) ? 0 : (1<< 6)) |
+ (PINB&(1<<5) ? 0 : (1<< 7)) |
+ (PINB&(1<<6) ? 0 : (1<< 8)) |
+ (PINF&(1<<7) ? 0 : (1<< 9)) |
+ (PINF&(1<<6) ? 0 : (1<<10)) |
+ (PINF&(1<<5) ? 0 : (1<<11)) |
+ (PINF&(1<<4) ? 0 : (1<<12)) |
+ (PINF&(1<<1) ? 0 : (1<<13)) |
+ (PINF&(1<<0) ? 0 : (1<<14));
+}
+
+/* Row pin configuration
+ * row: 0 1 2 3
+ * pin: B0 B1 B2 B3
+ */
+static void unselect_rows(void)
+{
+ // Hi-Z(DDR:0, PORT:0) to unselect
+ DDRB &= ~(1<<0 | 1<<1 | 1<<2 | 1<<3 | 1<<7);
+ PORTB |= (1<<0 | 1<<1 | 1<<2 | 1<<3 | 1<<7);
+}
+
+static void select_row(uint8_t row)
+{
+ switch (row) {
+ case 0:
+ DDRB |= (1<<0);
+ PORTB &= ~(1<<0);
+ break;
+ case 1:
+ DDRB |= (1<<1);
+ PORTB &= ~(1<<1);
+ break;
+ case 2:
+ DDRB |= (1<<2);
+ PORTB &= ~(1<<2);
+ break;
+ case 3:
+ DDRB |= (1<<3);
+ PORTB &= ~(1<<3);
+ break;
+ case 4:
+ DDRB |= (1<<7);
+ PORTB &= ~(1<<7);
+ break;
+ }
+}
SRC = keymap_common.c \
$(MATRIX) \
led.c \
- backlight.c \
- beeps.c
+ backlight.c
ifdef KEYMAP
SRC := common_keymaps/keymap_$(KEYMAP).c $(SRC)
SRC = extended_keymap_common.c \
$(MATRIX) \
led.c \
- backlight.c \
- beeps.c
+ backlight.c
ifdef KEYMAP
SRC := extended_keymaps/extended_keymap_$(KEYMAP).c $(SRC)
#ifndef CONFIG_H
#define CONFIG_H
+#include "config_definitions.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define MATRIX_ROWS 4
#define MATRIX_COLS 12
+/* Planck PCB default pin-out */
+#define COLS (int []){ F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7 }
+#define ROWS (int []){ D0, D5, B5, B6 }
+
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
--- /dev/null
+#ifndef CONFIG_DEFINITIONS_H
+#define CONFIG_DEFINITIONS_H
+
+#define B0 0x20
+#define B1 0x21
+#define B2 0x22
+#define B3 0x23
+#define B4 0x24
+#define B5 0x25
+#define B6 0x26
+#define B7 0x27
+#define C0 0x30
+#define C1 0x31
+#define C2 0x32
+#define C3 0x33
+#define C4 0x34
+#define C5 0x35
+#define C6 0x36
+#define C7 0x37
+#define D0 0x40
+#define D1 0x41
+#define D2 0x42
+#define D3 0x43
+#define D4 0x44
+#define D5 0x45
+#define D6 0x46
+#define D7 0x47
+#define E0 0x50
+#define E1 0x51
+#define E2 0x52
+#define E3 0x53
+#define E4 0x54
+#define E5 0x55
+#define E6 0x56
+#define E7 0x57
+#define F0 0x60
+#define F1 0x61
+#define F2 0x62
+#define F3 0x63
+#define F4 0x64
+#define F5 0x65
+#define F6 0x66
+#define F7 0x67
+
+
+
+
+
+#endif
+
#include "extended_keymap_common.h"
#include "backlight.h"
#include "lufa.h"
+#include "debug.h"
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = { /* Qwerty */
switch(id) {
case 0:
if (record->event.pressed) {
- if (!&midi_device) {
- register_code(KC_RSFT);
- } else {
- midi_send_noteon(&midi_device, 1, 64, 127);
- }
+ register_code(KC_RSFT);
+ midi_send_noteon(&midi_device, 1, 64, 127);
backlight_step();
} else {
- if (!&midi_device) {
- unregister_code(KC_RSFT);
- } else {
- midi_send_noteoff(&midi_device, 1, 64, 127);
- }
+ unregister_code(KC_RSFT);
+ midi_send_noteoff(&midi_device, 1, 64, 127);
}
break;
}
--- /dev/null
+/*
+Copyright 2012 Jun Wako
+Generated by planckkeyboard.com (2014 Jack Humbert)
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * scan matrix
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "backlight.h" // TODO fix this dependency
+
+#ifndef DEBOUNCE
+# define DEBOUNCE 10
+#endif
+static uint8_t debouncing = DEBOUNCE;
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+static matrix_row_t read_cols(void);
+static void init_cols(void);
+static void unselect_rows(void);
+static void select_row(uint8_t row);
+
+inline
+uint8_t matrix_rows(void)
+{
+ return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+ return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+ // To use PORTF disable JTAG with writing JTD bit twice within four cycles.
+ MCUCR |= (1<<JTD);
+ MCUCR |= (1<<JTD);
+
+ backlight_init_ports();
+
+ // Turn status LED on
+ DDRE |= (1<<6);
+ PORTE |= (1<<6);
+
+ // initialize row and col
+ unselect_rows();
+ init_cols();
+
+ // initialize matrix state: all keys off
+ for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+ matrix[i] = 0;
+ matrix_debouncing[i] = 0;
+ }
+}
+
+
+uint8_t matrix_scan(void)
+{
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ select_row(i);
+ _delay_us(30); // without this wait read unstable value.
+ matrix_row_t cols = read_cols();
+ if (matrix_debouncing[i] != cols) {
+ matrix_debouncing[i] = cols;
+ if (debouncing) {
+ debug("bounce!: "); debug_hex(debouncing); debug("\n");
+ }
+ debouncing = DEBOUNCE;
+ }
+ unselect_rows();
+ }
+
+ if (debouncing) {
+ if (--debouncing) {
+ _delay_ms(1);
+ } else {
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ matrix[i] = matrix_debouncing[i];
+ }
+ }
+ }
+
+ return 1;
+}
+
+bool matrix_is_modified(void)
+{
+ if (debouncing) return false;
+ return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+ return (matrix[row] & ((matrix_row_t)1<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+ return matrix[row];
+}
+
+void matrix_print(void)
+{
+ print("\nr/c 0123456789ABCDEF\n");
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ phex(row); print(": ");
+ pbin_reverse16(matrix_get_row(row));
+ print("\n");
+ }
+}
+
+uint8_t matrix_key_count(void)
+{
+ uint8_t count = 0;
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ count += bitpop16(matrix[i]);
+ }
+ return count;
+}
+
+static void init_cols(void)
+{
+ int B = 0, C = 0, D = 0, E = 0, F = 0;
+ for(int x = 0; x < MATRIX_COLS; x++) {
+ int col = COLS[x];
+ if ((col & 0xF0) == 0x20) {
+ B |= (1<<(col & 0x0F));
+ } else if ((col & 0xF0) == 0x30) {
+ C |= (1<<(col & 0x0F));
+ } else if ((col & 0xF0) == 0x40) {
+ D |= (1<<(col & 0x0F));
+ } else if ((col & 0xF0) == 0x50) {
+ E |= (1<<(col & 0x0F));
+ } else if ((col & 0xF0) == 0x60) {
+ F |= (1<<(col & 0x0F));
+ }
+ }
+ DDRB &= ~(B); PORTB |= (B);
+ DDRC &= ~(C); PORTC |= (C);
+ DDRD &= ~(D); PORTD |= (D);
+ DDRE &= ~(E); PORTE |= (E);
+ DDRF &= ~(F); PORTF |= (F);
+}
+
+static matrix_row_t read_cols(void)
+{
+ matrix_row_t result = 0;
+ for(int x = 0; x < MATRIX_COLS; x++) {
+ int col = COLS[x];
+ if ((col & 0xF0) == 0x20) {
+ result |= (PINB&(1<<(col & 0x0F)) ? 0 : (1<<x));
+ } else if ((col & 0xF0) == 0x30) {
+ result |= (PINC&(1<<(col & 0x0F)) ? 0 : (1<<x));
+ } else if ((col & 0xF0) == 0x40) {
+ result |= (PIND&(1<<(col & 0x0F)) ? 0 : (1<<x));
+ } else if ((col & 0xF0) == 0x50) {
+ result |= (PINE&(1<<(col & 0x0F)) ? 0 : (1<<x));
+ } else if ((col & 0xF0) == 0x60) {
+ result |= (PINF&(1<<(col & 0x0F)) ? 0 : (1<<x));
+ }
+ }
+ return result;
+}
+
+static void unselect_rows(void)
+{
+ int B = 0, C = 0, D = 0, E = 0, F = 0;
+ for(int x = 0; x < MATRIX_ROWS; x++) {
+ int row = ROWS[x];
+ if ((row & 0xF0) == 0x20) {
+ B |= (1<<(row & 0x0F));
+ } else if ((row & 0xF0) == 0x30) {
+ C |= (1<<(row & 0x0F));
+ } else if ((row & 0xF0) == 0x40) {
+ D |= (1<<(row & 0x0F));
+ } else if ((row & 0xF0) == 0x50) {
+ E |= (1<<(row & 0x0F));
+ } else if ((row & 0xF0) == 0x60) {
+ F |= (1<<(row & 0x0F));
+ }
+ }
+ DDRB &= ~(B); PORTB |= (B);
+ DDRC &= ~(C); PORTC |= (C);
+ DDRD &= ~(D); PORTD |= (D);
+ DDRE &= ~(E); PORTE |= (E);
+ DDRF &= ~(F); PORTF |= (F);
+}
+
+static void select_row(uint8_t row)
+{
+ int row_pin = ROWS[row];
+ if ((row_pin & 0xF0) == 0x20) {
+ DDRB |= (1<<(row_pin & 0x0F));
+ PORTB &= ~(1<<(row_pin & 0x0F));
+ } else if ((row_pin & 0xF0) == 0x30) {
+ DDRC |= (1<<(row_pin & 0x0F));
+ PORTC &= ~(1<<(row_pin & 0x0F));
+ } else if ((row_pin & 0xF0) == 0x40) {
+ DDRD |= (1<<(row_pin & 0x0F));
+ PORTD &= ~(1<<(row_pin & 0x0F));
+ } else if ((row_pin & 0xF0) == 0x50) {
+ DDRE |= (1<<(row_pin & 0x0F));
+ PORTE &= ~(1<<(row_pin & 0x0F));
+ } else if ((row_pin & 0xF0) == 0x60) {
+ DDRF |= (1<<(row_pin & 0x0F));
+ PORTF &= ~(1<<(row_pin & 0x0F));
+ }
+}
\ No newline at end of file
--- /dev/null
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+# Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+# (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+# have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+# have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+# (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+# (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+# with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+# bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = preonic_lufa
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# # project specific files
+SRC = extended_keymap_common.c \
+ matrix.c \
+ led.c \
+ backlight.c
+
+ifdef KEYMAP
+ SRC := extended_keymaps/extended_keymap_$(KEYMAP).c $(SRC)
+else
+ SRC := extended_keymaps/extended_keymap_default.c $(SRC)
+endif
+
+CONFIG_H = config.h
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
+MIDI_ENABLE = yes # MIDI controls
+BACKLIGHT_ENABLE = yes
+
+# Optimize size but this may cause error "relocation truncated to fit"
+#EXTRALDFLAGS = -Wl,--relax
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
+include $(TOP_DIR)/protocol/lufa.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
--- /dev/null
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+# Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+# (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+# have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+# have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+# (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+# (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+# with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+# bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = gh60_pjrc
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# project specific files
+SRC = keymap_common.c \
+ matrix.c \
+ led.c
+
+ifdef KEYMAP
+ SRC := keymap_$(KEYMAP).c $(SRC)
+else
+ SRC := keymap_jack.c $(SRC)
+endif
+
+CONFIG_H = config.h
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+MCU = atmega32u4
+#MCU = at90usb1286
+
+
+# Processor frequency.
+# Normally the first thing your program should do is set the clock prescaler,
+# so your program will run at the correct speed. You should also set this
+# variable to same clock speed. The _delay_ms() macro uses this, and many
+# examples use this variable to calculate timings. Do not add a "UL" here.
+F_CPU = 16000000
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+5000)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+600)
+CONSOLE_ENABLE = yes # Console for debug
+COMMAND_ENABLE = yes # Commands for debug and configuration
+SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes # USB Nkey Rollover(+500)
+#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
+include $(TOP_DIR)/protocol/pjrc.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
+
+plain: OPT_DEFS += -DKEYMAP_PLAIN
+plain: all
+
+poker: OPT_DEFS += -DKEYMAP_POKER
+poker: all
+
+poker_set: OPT_DEFS += -DKEYMAP_POKER_SET
+poker_set: all
+
+poker_bit: OPT_DEFS += -DKEYMAP_POKER_BIT
+poker_bit: all
--- /dev/null
+# Planck Firmware Guide
+
+## Setting up the environment
+
+### Windows
+1. Install [WinAVR Tools](http://sourceforge.net/projects/winavr/) for AVR GCC compiler.
+2. Install [DFU-Programmer][dfu-prog] (the -win one).
+3. Start DFU bootloader on the chip first time you will see 'Found New Hardware Wizard' to install driver. If you install device driver properly you can find chip name like 'ATmega32U4' under 'LibUSB-Win32 Devices' tree on 'Device Manager'. If not you will need to update its driver on 'Device Manager' to the `dfu-programmer` driver.
+
+### Mac
+1. Install [CrossPack](http://www.obdev.at/products/crosspack/index.html) or install Xcode from the App Store and install the Command Line Tools from `Xcode->Preferences->Downloads`.
+2. Install [DFU-Programmer][dfu-prog].
+
+### Linux
+1. Install AVR GCC with your favorite package manager.
+2. Install [DFU-Programmer][dfu-prog].
+
+##Verify Your Installation
+1. Clone the following repository: https://github.com/jackhumbert/tmk_keyboard
+2. Open a Terminal and `cd` into `tmk_keyboard/keyboard/planck`
+3. Run `make`. This should output a lot of information about the build process.
+
+## Using the built-in functions
+
+Here is a list of some of the functions available from the command line:
+
+* `make clean`: clean the environment - may be required in-between builds
+* `make`: compile the code
+* `make COMMON=true`: compile with the common (non-extended) keymap
+* `make MATRIX=<matrix_file>`: compile with the referenced matrix file. Default if unspecified is `matrix_pcb.c`. For handwired boards, use `matrix_handwired.c`.
+* `make KEYMAP=<keymap>`: compile with the extended keymap file `extended_keymaps/extended_keymap_<keymap>.c`
+* `make COMMON=true KEYMAP=<keymap>`: compile with the common keymap file `common_keymaps/keymap_<keymap>.c`
+* `make dfu`: build and flash the layout to the PCB
+* `make dfu-force`: build and force-flash the layout to the PCB (may be require for first flash)
+
+Generally, the instructions to flash the PCB are as follows:
+
+1. Make changes to the appropriate keymap file
+2. Save the file
+3. `make clean`
+4. Press the reset button on the PCB/press the key with the `RESET` keycode
+5. `make <arguments> dfu` - use the necessary `KEYMAP=<keymap>` and/or `COMMON=true` arguments here.
+
+## Extended keymap
+
+### Keymap
+
+Unlike the common keymap, prefixing the keycodes with `KC_` is required. A full list of the keycodes is available [here](https://github.com/jackhumbert/tmk_keyboard/blob/master/doc/keycode.txt). For the keycodes available only in the extended keymap, see this [header file](https://github.com/jackhumbert/tmk_keyboard/blob/master/keyboard/planck/extended_keymap_common.h).
+
+You can use modifiers with keycodes like this:
+
+ LCTL(KC_C)
+
+Which will generate Ctrl+c. These are daisy-chainable, meaning you can do things like:
+
+ LCTL(LALT(KC_C))
+
+That will generate Ctrl+Alt+c. The entire list of these functions is here:
+
+* `LCTL()`: Left control
+* `LSFT()` / `S()`: Left shift
+* `LALT()`: Left alt/opt
+* `LGUI()`: Left win/cmd
+* `RCTL()`: Right control
+* `RSFT()`: Right shift
+* `RALT()`: Right alt/opt
+* `RGUI()`: Right win/cmd
+
+`S(KC_1)`-like entries are useful in writing keymaps for the Planck.
+
+### Other keycodes
+
+A number of other keycodes have been added that you may find useful:
+
+* `CM_<key>`: the Colemak equivalent of a key (in place of `KC_<key>`), when using Colemak in software (`CM_O` generates `KC_SCLN`)
+* `RESET`: jump to bootloader for flashing (same as press the reset button)
+* `BL_STEP`: step through the backlight brightnesses
+* `BL_<0-15>`: set backlight brightness to 0-15
+* `BL_DEC`: lower the backlight brightness
+* `BL_INC`: raise the backlight brightness
+* `BL_TOGG`: toggle the backlight on/off
+
+### Function layers
+
+The extended keymap extends the number of function layers from 32 to the near-infinite value of 256. Rather than using `FN<num>` notation (still available, but limited to `FN0`-`FN31`), you can use the `FUNC(<num>)` notation. `F(<num>)` is a shortcut for this.
+
+The function actions are unchanged, and you can see the full list of them [here](https://github.com/jackhumbert/tmk_keyboard/blob/master/common/action_code.h). They are explained in detail [here](https://github.com/jackhumbert/tmk_keyboard/blob/master/doc/keymap.md#2-action).
+
+### Macros
+
+Macros have been setup in the `extended_keymaps/extended_keymaps_default.c` file so that you can use `M(<num>)` to access a macro in the `action_get_macro` section on your keymap. The switch/case structure you see here is required, and is setup for `M(0)` - you'll need to copy and paste the code to look like this (e.g. to support `M(3)`):
+
+ switch(id) {
+ case 0:
+ return MACRODOWN(TYPE(KC_A), END);
+ break;
+ case 1:
+ return MACRODOWN(TYPE(KC_B), END);
+ break;
+ case 2:
+ return MACRODOWN(TYPE(KC_C), END);
+ break;
+ case 3:
+ return MACRODOWN(TYPE(KC_D), END);
+ break;
+ }
+ return MACRO_NONE;
+
+`MACRODOWN()` is a shortcut for `(record->event.pressed ? MACRO(__VA_ARGS__) : MACRO_NONE)` which tells the macro to execute when the key is pressed. Without this, the macro will be executed on both the down and up stroke.
+
+[cygwin]: https://www.cygwin.com/
+[mingw]: http://www.mingw.org/
+[mhv]: https://infernoembedded.com/products/avr-tools
+[winavr]: http://winavr.sourceforge.net/
+[crosspack]: http://www.obdev.at/products/crosspack/index.html
+[dfu-prog]: http://dfu-programmer.sourceforge.net/
--- /dev/null
+Planck keyboard firmware
+======================
+DIY/Assembled compact ortholinear 40% keyboard by [Ortholinear Keyboards](http://ortholinearkeyboards.com).
+
+## Extended Keymap
+If you include extended_keymap_common.h instead of keymap_common.h at the top of your file, you'll have access to a bunch of goodies:
+
+- Use `LSFT()`, `LCTL()`, et. al. (listed in extended_keymap_common.h) as modifiers for keys (daisy-chain-able)
+- Use `FUNC(1)` instead of `FN1` (etc.) to access the function layers beyond the 32 function layer limit
+- Use `CM_F` instead of `KC_F` to get the ColeMak equivilent for shortcuts (maps backwards)
+- Use `MACRODOWN()` instead of `MACRO()` to easily make a keydown macro (`CM_*` works here too)
+
+### Some notes on usage:
+
+- The `KEYMAP()` macro is unable to be used due to the bitwise modifications that take place - refer to extended_keymap_jack.c to see how to set things up with the `KC_` prefix
+- Keep an eye on the Makefile - this needs to include the correct files to work
+- Don't forget to use `const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {` instead of the 8bit equivilent
+
+## Build
+
+Follow [this guide](http://deskthority.net/workshop-f7/how-to-build-your-very-own-keyboard-firmware-t7177.html) to setup your development environment before anything else. Abbreviated instructions are provide at the [bottom of this document](https://github.com/rswiernik/tmk_keyboard/tree/rswiernik_dev/keyboard/planck#environment-setup)
+
+Download the whole firmware [here](https://github.com/jackhumbert/tmk_keyboard/archive/master.zip) and navigate to the keyboard/planck folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex that you can load with the Teensy app onto your Planck (once you've hit reset/shorted GND & RST).
+
+Depending on which keymap you would like to use, you will have to compile slightly differently.
+
+####Default
+To build with the default keymap, simply move to the tmk\_keyboard/keyboard/planck/ and run `make` as follows:
+```
+$ make
+```
+
+## Keymap
+Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `keymap_<name>.c` and see keymap document (you can find in top README.md) and existent keymap files.
+
+####**Extended Keymaps**
+
+To build the firmware binary hex file with an extended keymap just do `make` with `KEYMAP` option like:
+```
+$ make KEYMAP=[common|jack|<name>]
+```
+_The only applicable keymaps will work with this option._ Extended keymaps follow the format **__extended\_keymap\_\<name\>.c__**
+
+####**Common Keymaps**
+
+Building with a common keymap is as simple as adding the COMMON option. Note that only
+```
+$ make KEYMAP=[common|jack|<name>] COMMON=true
+```
+_The only applicable keymaps will work with this option._ Common keymaps follow the format **__keymap\_\<name\>.c__**
+
+## Notable TMK forks (which some of the keymap files are from)
+- [Shane's Fork](https://github.com/shanecelis/tmk_keyboard/tree/master/keyboard/planck)
+- [Pierre's Fork](https://github.com/pcarrier/tmk_keyboard/blob/pcarrier/planck/keyboard/gh60/keymap_planck.c)
+- [Nathan's Fork](https://github.com/nathanrosspowell/tmk_keyboard/tree/planck-jack/keyboard/planck)
+- [Matthew's Fork](https://github.com/pepers/tmk_keyboard/tree/master/keyboard/planck_grid)
--- /dev/null
+define reset
+SIGNAL SIGHUP
+end
+file planck_lufa.elf
+target remote localhost:4242
+break main
--- /dev/null
+// Simple analog to digitial conversion
+
+#include <avr/io.h>
+#include <avr/pgmspace.h>
+#include <stdint.h>
+#include "analog.h"
+
+
+static uint8_t aref = (1<<REFS0); // default to AREF = Vcc
+
+
+void analogReference(uint8_t mode)
+{
+ aref = mode & 0xC0;
+}
+
+
+// Arduino compatible pin input
+int16_t analogRead(uint8_t pin)
+{
+#if defined(__AVR_ATmega32U4__)
+ static const uint8_t PROGMEM pin_to_mux[] = {
+ 0x00, 0x01, 0x04, 0x05, 0x06, 0x07,
+ 0x25, 0x24, 0x23, 0x22, 0x21, 0x20};
+ if (pin >= 12) return 0;
+ return adc_read(pgm_read_byte(pin_to_mux + pin));
+#elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)
+ if (pin >= 8) return 0;
+ return adc_read(pin);
+#else
+ return 0;
+#endif
+}
+
+// Mux input
+int16_t adc_read(uint8_t mux)
+{
+#if defined(__AVR_AT90USB162__)
+ return 0;
+#else
+ uint8_t low;
+
+ ADCSRA = (1<<ADEN) | ADC_PRESCALER; // enable ADC
+ ADCSRB = (1<<ADHSM) | (mux & 0x20); // high speed mode
+ ADMUX = aref | (mux & 0x1F); // configure mux input
+ ADCSRA = (1<<ADEN) | ADC_PRESCALER | (1<<ADSC); // start the conversion
+ while (ADCSRA & (1<<ADSC)) ; // wait for result
+ low = ADCL; // must read LSB first
+ return (ADCH << 8) | low; // must read MSB only once!
+#endif
+}
+
+
--- /dev/null
+#ifndef _analog_h_included__
+#define _analog_h_included__
+
+#include <stdint.h>
+
+void analogReference(uint8_t mode);
+int16_t analogRead(uint8_t pin);
+int16_t adc_read(uint8_t mux);
+
+#define ADC_REF_POWER (1<<REFS0)
+#define ADC_REF_INTERNAL ((1<<REFS1) | (1<<REFS0))
+#define ADC_REF_EXTERNAL (0)
+
+// These prescaler values are for high speed mode, ADHSM = 1
+#if F_CPU == 16000000L
+#define ADC_PRESCALER ((1<<ADPS2) | (1<<ADPS1))
+#elif F_CPU == 8000000L
+#define ADC_PRESCALER ((1<<ADPS2) | (1<<ADPS0))
+#elif F_CPU == 4000000L
+#define ADC_PRESCALER ((1<<ADPS2))
+#elif F_CPU == 2000000L
+#define ADC_PRESCALER ((1<<ADPS1) | (1<<ADPS0))
+#elif F_CPU == 1000000L
+#define ADC_PRESCALER ((1<<ADPS1))
+#else
+#define ADC_PRESCALER ((1<<ADPS0))
+#endif
+
+// some avr-libc versions do not properly define ADHSM
+#if defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)
+#if !defined(ADHSM)
+#define ADHSM (7)
+#endif
+#endif
+
+#endif
--- /dev/null
+
+#include <avr/io.h>
+#include "backlight.h"
+
+#define CHANNEL OCR1C
+
+void backlight_init_ports()
+{
+
+ // Setup PB7 as output and output low.
+ DDRB |= (1<<7);
+ PORTB &= ~(1<<7);
+
+ // Use full 16-bit resolution.
+ ICR1 = 0xFFFF;
+
+ // I could write a wall of text here to explain... but TL;DW
+ // Go read the ATmega32u4 datasheet.
+ // And this: http://blog.saikoled.com/post/43165849837/secret-konami-cheat-code-to-high-resolution-pwm-on
+
+ // Pin PB7 = OCR1C (Timer 1, Channel C)
+ // Compare Output Mode = Clear on compare match, Channel C = COM1C1=1 COM1C0=0
+ // (i.e. start high, go low when counter matches.)
+ // WGM Mode 14 (Fast PWM) = WGM13=1 WGM12=1 WGM11=1 WGM10=0
+ // Clock Select = clk/1 (no prescaling) = CS12=0 CS11=0 CS10=1
+
+ TCCR1A = _BV(COM1C1) | _BV(WGM11); // = 0b00001010;
+ TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001;
+
+ backlight_init();
+}
+
+void backlight_set(uint8_t level)
+{
+ if ( level == 0 )
+ {
+ // Turn off PWM control on PB7, revert to output low.
+ TCCR1A &= ~(_BV(COM1C1));
+ CHANNEL = 0x0;
+ // Prevent backlight blink on lowest level
+ PORTB &= ~(_BV(PORTB7));
+ }
+ else if ( level == BACKLIGHT_LEVELS )
+ {
+ // Prevent backlight blink on lowest level
+ PORTB &= ~(_BV(PORTB7));
+ // Turn on PWM control of PB7
+ TCCR1A |= _BV(COM1C1);
+ // Set the brightness
+ CHANNEL = 0xFFFF;
+ }
+ else
+ {
+ // Prevent backlight blink on lowest level
+ PORTB &= ~(_BV(PORTB7));
+ // Turn on PWM control of PB7
+ TCCR1A |= _BV(COM1C1);
+ // Set the brightness
+ CHANNEL = 0xFFFF >> ((BACKLIGHT_LEVELS - level) * ((BACKLIGHT_LEVELS + 1) / 2));
+ }
+}
\ No newline at end of file
--- /dev/null
+#include "beeps.h"
+#include <math.h>
+#include <avr/pgmspace.h>
+#include <avr/interrupt.h>
+#include <avr/io.h>
+
+#define PI 3.14159265
+#define CHANNEL OCR1C
+
+volatile uint16_t sample;
+uint16_t lastSample;
+
+const int sounddata_length=200;
+
+const unsigned char sounddata_data[] PROGMEM = {128,
+128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128,
+128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128,
+128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128,
+128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128,
+128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128,
+128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128,
+128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128,
+128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128,
+128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128,
+128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 129, 127, 129, 128, 127, 133,
+117, 109, 125, 121, 116, 132, 140, 126, 114, 114, 116, 120, 114, 93, 73, 66, 76, 116, 142, 129,
+128, 129, 120, 119, 118, 104, 87, 123, 181, 194, 196, 198, 189, 176, 160, 162, 172, 164, 164, 183,
+197, 188, 168, 167, 170, 165, 185, 209, 206, 196, 196, 199, 185, 162, 156, 167, 176, 173, 170, 166,
+151, 142, 140, 134, 130, 127, 113, 86, 67, 66, 69, 75, 73, 75, 86, 90, 91, 84, 65, 48,
+41, 30, 26, 56, 91, 88, 72, 70, 73, 82, 89, 73, 57, 60, 74, 89, 92, 77, 63, 60,
+53, 47, 56, 64, 63, 61, 56, 54, 52, 36, 16, 22, 51, 66, 67, 70, 76, 88, 99, 92,
+77, 74, 85, 100, 106, 97, 83, 85, 96, 108, 133, 160, 164};
+
+void delay_us(int count) {
+ while(count--) {
+ _delay_us(1);
+ }
+}
+
+void beeps() {
+ // DDRB |= (1<<7);
+ // PORTB &= ~(1<<7);
+
+ // // Use full 16-bit resolution.
+ // ICR1 = 0xFFFF;
+
+ // // I could write a wall of text here to explain... but TL;DW
+ // // Go read the ATmega32u4 datasheet.
+ // // And this: http://blog.saikoled.com/post/43165849837/secret-konami-cheat-code-to-high-resolution-pwm-on
+
+ // // Pin PB7 = OCR1C (Timer 1, Channel C)
+ // // Compare Output Mode = Clear on compare match, Channel C = COM1C1=1 COM1C0=0
+ // // (i.e. start high, go low when counter matches.)
+ // // WGM Mode 14 (Fast PWM) = WGM13=1 WGM12=1 WGM11=1 WGM10=0
+ // // Clock Select = clk/1 (no prescaling) = CS12=0 CS11=0 CS10=1
+
+ // TCCR1A = _BV(COM1C1) | _BV(WGM11); // = 0b00001010;
+ // TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001;
+
+
+ // // Turn off PWM control on PB7, revert to output low.
+ // // TCCR1A &= ~(_BV(COM1C1));
+ // // CHANNEL = ((1 << level) - 1);
+
+ // // Turn on PWM control of PB7
+ // TCCR1A |= _BV(COM1C1);
+ // // CHANNEL = level << OFFSET | 0x0FFF;
+ // // CHANNEL = 0b1010101010101010;
+
+ // float x = 12;
+ // float y = 24;
+ // float length = 50;
+ // float scale = 1;
+
+ // // int f1 = 1000000/440;
+ // // int f2 = 1000000/880;
+ // // for (uint32_t i = 0; i < length * 1000; i++) {
+ // // // int frequency = 1/((sin(PI*2*i*scale*pow(2, x/12.0))*.5+1 + sin(PI*2*i*scale*pow(2, y/12.0))*.5+1) / 2);
+
+ // // ICR1 = f1; // Set max to the period
+ // // OCR1C = f1 >> 1; // Set compare to half the period
+ // // // _delay_us(10);
+ // // }
+ // int frequency = 1000000/440;
+ // ICR1 = frequency; // Set max to the period
+ // OCR1C = frequency >> 1; // Set compare to half the period
+ // _delay_us(500000);
+
+ // TCCR1A &= ~(_BV(COM1C1));
+ // CHANNEL = 0;
+play_notes();
+
+
+ // play_note(55*pow(2, 0/12.0), 1);
+ // play_note(55*pow(2, 12/12.0), 1);
+ // play_note(55*pow(2, 24/12.0), 1);
+ // play_note(55*pow(2, 0/12.0), 1);
+ // play_note(55*pow(2, 12/12.0), 1);
+ // play_note(55*pow(2, 24/12.0), 1);
+
+ // play_note(0, 4);
+
+ // play_note(55*pow(2, 0/12.0), 8);
+ // play_note(55*pow(2, 12/12.0), 4);
+ // play_note(55*pow(2, 10/12.0), 4);
+ // play_note(55*pow(2, 12/12.0), 8);
+ // play_note(55*pow(2, 10/12.0), 4);
+ // play_note(55*pow(2, 7/12.0), 2);
+ // play_note(55*pow(2, 8/12.0), 2);
+ // play_note(55*pow(2, 7/12.0), 16);
+ // play_note(0, 4);
+ // play_note(55*pow(2, 3/12.0), 8);
+ // play_note(55*pow(2, 5/12.0), 4);
+ // play_note(55*pow(2, 7/12.0), 4);
+ // play_note(55*pow(2, 7/12.0), 8);
+ // play_note(55*pow(2, 5/12.0), 4);
+ // play_note(55*pow(2, 3/12.0), 4);
+ // play_note(55*pow(2, 2/12.0), 16);
+
+
+}
+
+void play_note(float freq, int length) {
+ DDRB |= (1<<7);
+ PORTB &= ~(1<<7);
+
+ if (freq > 0) {
+ int frequency = 1000000/freq;
+ ICR1 = frequency; // Set max to the period
+ OCR1C = frequency >> 1; // Set compare to half the period
+
+ TCCR1A = _BV(COM1C1) | _BV(WGM11); // = 0b00001010;
+ TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001;
+ }
+
+ for (int i = 0; i < length; i++) {
+ _delay_us(50000);
+ }
+
+ TCCR1A &= ~(_BV(COM1C1));
+}
+
+// This is called at 8000 Hz to load the next sample.
+ISR(TIMER1_COMPA_vect) {
+ if (sample >= sounddata_length) {
+ if (sample == sounddata_length + lastSample) {
+ TIMSK1 &= ~_BV(OCIE1A);
+
+ // Disable the per-sample timer completely.
+ TCCR1B &= ~_BV(CS10);
+ }
+ else {
+ OCR1C = sounddata_length + lastSample - sample;
+ }
+ }
+ else {
+ OCR1C = pgm_read_byte(&sounddata_data[sample]);
+ }
+
+ ++sample;
+}
+
+void play_notes() {
+
+
+ // Set up Timer 2 to do pulse width modulation on the speaker
+ // pin.
+
+ DDRB |= (1<<7);
+ PORTB &= ~(1<<7);
+
+ // Use internal clock (datasheet p.160)
+ // ASSR &= ~(_BV(EXCLK) | _BV(AS2));
+
+ // Set fast PWM mode (p.157)
+ TCCR1A |= _BV(WGM21) | _BV(WGM20);
+ TCCR1B &= ~_BV(WGM22);
+
+ // Do non-inverting PWM on pin OC2A (p.155)
+ // On the Arduino this is pin 11.
+ TCCR1A = (TCCR2A | _BV(COM2A1)) & ~_BV(COM2A0);
+ TCCR1A &= ~(_BV(COM2B1) | _BV(COM2B0));
+ // No prescaler (p.158)
+ TCCR1B = (TCCR1B & ~(_BV(CS12) | _BV(CS11))) | _BV(CS10);
+
+ // Set initial pulse width to the first sample.
+ OCR1A = pgm_read_byte(&sounddata_data[0]);
+
+
+
+
+ cli();
+
+ // Set CTC mode (Clear Timer on Compare Match) (p.133)
+ // Have to set OCR1A *after*, otherwise it gets reset to 0!
+ TCCR2B = (TCCR2B & ~_BV(WGM13)) | _BV(WGM12);
+ TCCR2A = TCCR2A & ~(_BV(WGM11) | _BV(WGM10));
+
+ // No prescaler (p.134)
+ TCCR2B = (TCCR2B & ~(_BV(CS12) | _BV(CS11))) | _BV(CS10);
+
+ // Set the compare register (OCR1A).
+ // OCR1A is a 16-bit register, so we have to do this with
+ // interrupts disabled to be safe.
+ // OCR2A = F_CPU / SAMPLE_RATE; // 16e6 / 8000 = 2000
+ OCR2A = 2000;
+
+ // Enable interrupt when TCNT1 == OCR1A (p.136)
+ TIMSK1 |= _BV(OCIE2A);
+
+ sample = 0;
+ sei();
+}
+
+void note(int x, float length) {
+ DDRB |= (1<<1);
+ int t = (int)(440*pow(2,-x/12.0)); // starting note
+ for (int y = 0; y < length*1000/t; y++) { // note length
+ PORTB |= (1<<1);
+ delay_us(t);
+ PORTB &= ~(1<<1);
+ delay_us(t);
+ }
+ PORTB &= ~(1<<1);
+}
+
+void true_note(float x, float y, float length) {
+ for (uint32_t i = 0; i < length * 50; i++) {
+ uint32_t v = (uint32_t) (round(sin(PI*2*i*640000*pow(2, x/12.0))*.5+1 + sin(PI*2*i*640000*pow(2, y/12.0))*.5+1) / 2 * pow(2, 8));
+ for (int u = 0; u < 8; u++) {
+ if (v & (1 << u) && !(PORTB&(1<<1)))
+ PORTB |= (1<<1);
+ else if (PORTB&(1<<1))
+ PORTB &= ~(1<<1);
+ }
+ }
+ PORTB &= ~(1<<1);
+}
\ No newline at end of file
--- /dev/null
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+
+void note(int x, float length);
+void beeps();
+void true_note(float x, float y, float length);
+void play_note(float freq, int length);
\ No newline at end of file
--- /dev/null
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_definitions.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6060
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Ortholinear Keyboards
+#define PRODUCT The Preonic Keyboard
+#define DESCRIPTION A compact ortholinear keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 12
+
+/* Planck PCB default pin-out */
+#define COLS (int []){ F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7 }
+#define ROWS (int []){ D1, D0, D5, B5, B6 }
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+#define NO_DEBUG
+
+/* disable print */
+#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
--- /dev/null
+#ifndef CONFIG_DEFINITIONS_H
+#define CONFIG_DEFINITIONS_H
+
+#define B0 0x20
+#define B1 0x21
+#define B2 0x22
+#define B3 0x23
+#define B4 0x24
+#define B5 0x25
+#define B6 0x26
+#define B7 0x27
+#define C0 0x30
+#define C1 0x31
+#define C2 0x32
+#define C3 0x33
+#define C4 0x34
+#define C5 0x35
+#define C6 0x36
+#define C7 0x37
+#define D0 0x40
+#define D1 0x41
+#define D2 0x42
+#define D3 0x43
+#define D4 0x44
+#define D5 0x45
+#define D6 0x46
+#define D7 0x47
+#define E0 0x50
+#define E1 0x51
+#define E2 0x52
+#define E3 0x53
+#define E4 0x54
+#define E5 0x55
+#define E6 0x56
+#define E7 0x57
+#define F0 0x60
+#define F1 0x61
+#define F2 0x62
+#define F3 0x63
+#define F4 0x64
+#define F5 0x65
+#define F6 0x66
+#define F7 0x67
+
+
+
+
+
+#endif
+
--- /dev/null
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "extended_keymap_common.h"
+#include "report.h"
+#include "keycode.h"
+#include "action_layer.h"
+#include "action.h"
+#include "action_macro.h"
+#include "debug.h"
+#include "backlight.h"
+
+static action_t keycode_to_action(uint16_t keycode);
+
+
+/* converts key to action */
+action_t action_for_key(uint8_t layer, keypos_t key)
+{
+ // 16bit keycodes - important
+ uint16_t keycode = keymap_key_to_keycode(layer, key);
+
+ if (keycode >= 0x0100 && keycode < 0x2000) {
+ // Has a modifier
+ action_t action;
+ // Split it up
+ action.code = ACTION_MODS_KEY(keycode >> 8, keycode & 0xFF);
+ return action;
+ } else if (keycode >= 0x2000 && keycode < 0x3000) {
+ // Is a shortcut for function layer, pull last 12bits
+ return keymap_func_to_action(keycode & 0xFFF);
+ } else if (keycode >= 0x3000 && keycode < 0x4000) {
+ action_t action;
+ action.code = ACTION_MACRO(keycode & 0xFF);
+ return action;
+ } else if (keycode >= BL_0 & keycode <= BL_15) {
+ action_t action;
+ action.code = ACTION_BACKLIGHT_LEVEL(keycode & 0x000F);
+ return action;
+ } else if (keycode == BL_DEC) {
+ action_t action;
+ action.code = ACTION_BACKLIGHT_DECREASE();
+ return action;
+ } else if (keycode == BL_INC) {
+ action_t action;
+ action.code = ACTION_BACKLIGHT_INCREASE();
+ return action;
+ } else if (keycode == BL_TOGG) {
+ action_t action;
+ action.code = ACTION_BACKLIGHT_TOGGLE();
+ return action;
+ } else if (keycode == BL_STEP) {
+ action_t action;
+ action.code = ACTION_BACKLIGHT_STEP();
+ return action;
+ } else if (keycode == RESET) {
+ bootloader_jump();
+ return;
+ } else if (keycode > RESET) {
+ // MIDI
+ return;
+ }
+
+ switch (keycode) {
+ case KC_FN0 ... KC_FN31:
+ return keymap_fn_to_action(keycode);
+#ifdef BOOTMAGIC_ENABLE
+ case KC_CAPSLOCK:
+ case KC_LOCKING_CAPS:
+ if (keymap_config.swap_control_capslock || keymap_config.capslock_to_control) {
+ return keycode_to_action(KC_LCTL);
+ }
+ return keycode_to_action(keycode);
+ case KC_LCTL:
+ if (keymap_config.swap_control_capslock) {
+ return keycode_to_action(KC_CAPSLOCK);
+ }
+ return keycode_to_action(KC_LCTL);
+ case KC_LALT:
+ if (keymap_config.swap_lalt_lgui) {
+ if (keymap_config.no_gui) {
+ return keycode_to_action(ACTION_NO);
+ }
+ return keycode_to_action(KC_LGUI);
+ }
+ return keycode_to_action(KC_LALT);
+ case KC_LGUI:
+ if (keymap_config.swap_lalt_lgui) {
+ return keycode_to_action(KC_LALT);
+ }
+ if (keymap_config.no_gui) {
+ return keycode_to_action(ACTION_NO);
+ }
+ return keycode_to_action(KC_LGUI);
+ case KC_RALT:
+ if (keymap_config.swap_ralt_rgui) {
+ if (keymap_config.no_gui) {
+ return keycode_to_action(ACTION_NO);
+ }
+ return keycode_to_action(KC_RGUI);
+ }
+ return keycode_to_action(KC_RALT);
+ case KC_RGUI:
+ if (keymap_config.swap_ralt_rgui) {
+ return keycode_to_action(KC_RALT);
+ }
+ if (keymap_config.no_gui) {
+ return keycode_to_action(ACTION_NO);
+ }
+ return keycode_to_action(KC_RGUI);
+ case KC_GRAVE:
+ if (keymap_config.swap_grave_esc) {
+ return keycode_to_action(KC_ESC);
+ }
+ return keycode_to_action(KC_GRAVE);
+ case KC_ESC:
+ if (keymap_config.swap_grave_esc) {
+ return keycode_to_action(KC_GRAVE);
+ }
+ return keycode_to_action(KC_ESC);
+ case KC_BSLASH:
+ if (keymap_config.swap_backslash_backspace) {
+ return keycode_to_action(KC_BSPACE);
+ }
+ return keycode_to_action(KC_BSLASH);
+ case KC_BSPACE:
+ if (keymap_config.swap_backslash_backspace) {
+ return keycode_to_action(KC_BSLASH);
+ }
+ return keycode_to_action(KC_BSPACE);
+#endif
+ default:
+ return keycode_to_action(keycode);
+ }
+}
+
+
+/* Macro */
+__attribute__ ((weak))
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+ return MACRO_NONE;
+}
+
+/* Function */
+__attribute__ ((weak))
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+}
+
+/* translates keycode to action */
+static action_t keycode_to_action(uint16_t keycode)
+{
+ action_t action;
+ switch (keycode) {
+ case KC_A ... KC_EXSEL:
+ case KC_LCTRL ... KC_RGUI:
+ action.code = ACTION_KEY(keycode);
+ break;
+ case KC_SYSTEM_POWER ... KC_SYSTEM_WAKE:
+ action.code = ACTION_USAGE_SYSTEM(KEYCODE2SYSTEM(keycode));
+ break;
+ case KC_AUDIO_MUTE ... KC_WWW_FAVORITES:
+ action.code = ACTION_USAGE_CONSUMER(KEYCODE2CONSUMER(keycode));
+ break;
+ case KC_MS_UP ... KC_MS_ACCEL2:
+ action.code = ACTION_MOUSEKEY(keycode);
+ break;
+ case KC_TRNS:
+ action.code = ACTION_TRANSPARENT;
+ break;
+ default:
+ action.code = ACTION_NO;
+ break;
+ }
+ return action;
+}
+
+
+/* translates key to keycode */
+uint16_t keymap_key_to_keycode(uint8_t layer, keypos_t key)
+{
+ // Read entire word (16bits)
+ return pgm_read_word(&keymaps[(layer)][(key.row)][(key.col)]);
+}
+
+/* translates Fn keycode to action */
+action_t keymap_fn_to_action(uint16_t keycode)
+{
+ return (action_t){ .code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]) };
+}
+
+action_t keymap_func_to_action(uint16_t keycode)
+{
+ // For FUNC without 8bit limit
+ return (action_t){ .code = pgm_read_word(&fn_actions[(int)keycode]) };
+}
--- /dev/null
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef KEYMAP_H
+#define KEYMAP_H
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "action.h"
+#include <avr/pgmspace.h>
+#include "keycode.h"
+#include "keymap.h"
+#include "action_macro.h"
+#include "report.h"
+#include "host.h"
+// #include "print.h"
+#include "debug.h"
+
+#ifdef BOOTMAGIC_ENABLE
+/* NOTE: Not portable. Bit field order depends on implementation */
+typedef union {
+ uint16_t raw;
+ struct {
+ bool swap_control_capslock:1;
+ bool capslock_to_control:1;
+ bool swap_lalt_lgui:1;
+ bool swap_ralt_rgui:1;
+ bool no_gui:1;
+ bool swap_grave_esc:1;
+ bool swap_backslash_backspace:1;
+ bool nkro:1;
+ };
+} keymap_config_t;
+keymap_config_t keymap_config;
+#endif
+
+
+/* translates key to keycode */
+uint16_t keymap_key_to_keycode(uint8_t layer, keypos_t key);
+
+/* translates Fn keycode to action */
+action_t keymap_fn_to_action(uint16_t keycode);
+
+/* translates Fn keycode to action */
+action_t keymap_func_to_action(uint16_t keycode);
+
+extern const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS];
+extern const uint16_t fn_actions[];
+
+// Ability to use mods in layouts
+#define LCTL(kc) kc | 0x0100
+#define LSFT(kc) kc | 0x0200
+#define LALT(kc) kc | 0x0400
+#define LGUI(kc) kc | 0x0800
+#define RCTL(kc) kc | 0x1100
+#define RSFT(kc) kc | 0x1200
+#define RALT(kc) kc | 0x1400
+#define RGUI(kc) kc | 0x1800
+
+// Alias for function layers than expand past FN31
+#define FUNC(kc) kc | 0x2000
+
+// Aliases
+#define S(kc) LSFT(kc)
+#define F(kc) FUNC(kc)
+
+// For software implementation of colemak
+#define CM_Q KC_Q
+#define CM_W KC_W
+#define CM_F KC_E
+#define CM_P KC_R
+#define CM_G KC_T
+#define CM_J KC_Y
+#define CM_L KC_U
+#define CM_U KC_I
+#define CM_Y KC_O
+#define CM_SCLN KC_P
+
+#define CM_A KC_A
+#define CM_R KC_S
+#define CM_S KC_D
+#define CM_T KC_F
+#define CM_D KC_G
+#define CM_H KC_H
+#define CM_N KC_J
+#define CM_E KC_K
+#define CM_I KC_L
+#define CM_O KC_SCLN
+
+#define CM_Z KC_Z
+#define CM_X KC_X
+#define CM_C KC_C
+#define CM_V KC_V
+#define CM_B KC_B
+#define CM_K KC_N
+#define CM_M KC_M
+#define CM_COMM KC_COMM
+#define CM_DOT KC_DOT
+#define CM_SLSH KC_SLSH
+
+// Make it easy to support these in macros
+#define KC_CM_Q CM_Q
+#define KC_CM_W CM_W
+#define KC_CM_F CM_F
+#define KC_CM_P CM_P
+#define KC_CM_G CM_G
+#define KC_CM_J CM_J
+#define KC_CM_L CM_L
+#define KC_CM_U CM_U
+#define KC_CM_Y CM_Y
+#define KC_CM_SCLN CM_SCLN
+
+#define KC_CM_A CM_A
+#define KC_CM_R CM_R
+#define KC_CM_S CM_S
+#define KC_CM_T CM_T
+#define KC_CM_D CM_D
+#define KC_CM_H CM_H
+#define KC_CM_N CM_N
+#define KC_CM_E CM_E
+#define KC_CM_I CM_I
+#define KC_CM_O CM_O
+
+#define KC_CM_Z CM_Z
+#define KC_CM_X CM_X
+#define KC_CM_C CM_C
+#define KC_CM_V CM_V
+#define KC_CM_B CM_B
+#define KC_CM_K CM_K
+#define KC_CM_M CM_M
+#define KC_CM_COMM CM_COMM
+#define KC_CM_DOT CM_DOT
+#define KC_CM_SLSH CM_SLSH
+
+#define M(kc) kc | 0x3000
+
+#define MACRODOWN(...) (record->event.pressed ? MACRO(__VA_ARGS__) : MACRO_NONE)
+
+#define BL_ON 0x4009
+#define BL_OFF 0x4000
+#define BL_0 0x4000
+#define BL_1 0x4001
+#define BL_2 0x4002
+#define BL_3 0x4003
+#define BL_4 0x4004
+#define BL_5 0x4005
+#define BL_6 0x4006
+#define BL_7 0x4007
+#define BL_8 0x4008
+#define BL_9 0x4009
+#define BL_10 0x400A
+#define BL_11 0x400B
+#define BL_12 0x400C
+#define BL_13 0x400D
+#define BL_14 0x400E
+#define BL_15 0x400F
+#define BL_DEC 0x4010
+#define BL_INC 0x4011
+#define BL_TOGG 0x4012
+#define BL_STEP 0x4013
+
+#define RESET 0x5000
+
+#define MIDI(n) n | 0x6000
+
+#endif
--- /dev/null
+#include "extended_keymap_common.h"
+#include "backlight.h"
+#include "lufa.h"
+#include "debug.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = { /* Qwerty */
+ {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC},
+ {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT},
+ {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT},
+ {M(0), KC_LCTL, KC_LALT, KC_LGUI, FUNC(2), KC_SPC, KC_SPC, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
+ // Space is repeated to accommadate for both spacebar wiring positions
+},
+[1] = { /* Colemak */
+ {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC},
+ {KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT},
+ {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT},
+ {KC_FN3, KC_LCTL, KC_LALT, KC_LGUI, FUNC(2), KC_SPC, KC_SPC, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
+},
+[2] = { /* RAISE */
+ {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC},
+ {KC_TRNS, FUNC(3), FUNC(4), RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS},
+ {KC_TRNS, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
+ {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(1), KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
+},
+[3] = { /* LOWER */
+ {S(KC_GRV), S(KC_1), S(KC_2), S(KC_3), S(KC_4), S(KC_5), S(KC_6), S(KC_7), S(KC_8), S(KC_9), S(KC_0), KC_BSPC},
+ {KC_TRNS, FUNC(3), FUNC(4), RESET, KC_TRNS, KC_TRNS, KC_TRNS, S(KC_MINS), S(KC_EQL), S(KC_LBRC), S(KC_RBRC), S(KC_BSLS)},
+ {KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_TRNS},
+ {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
+},
+[4] = { /* TENKEY */
+ {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_KP_7, KC_KP_8, KC_KP_9, KC_P, KC_BSPC},
+ {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_KP_4, KC_KP_5, KC_KP_6, KC_SCLN, KC_QUOT},
+ {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_KP_1, KC_KP_2, KC_KP_3, KC_SLSH, KC_ENT},
+ {KC_TRNS, KC_LCTL, KC_LALT, KC_LGUI, KC_TRNS, KC_SPC, KC_SPC, KC_KP_0, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
+}
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+ [1] = ACTION_LAYER_MOMENTARY(2), // to RAISE
+ [2] = ACTION_LAYER_MOMENTARY(3), // to LOWER
+
+ [3] = ACTION_DEFAULT_LAYER_SET(0),
+ [4] = ACTION_DEFAULT_LAYER_SET(1),
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+ // MACRODOWN only works in this function
+ switch(id) {
+ case 0:
+ if (record->event.pressed) {
+ register_code(KC_RSFT);
+ midi_send_noteon(&midi_device, 1, 64, 127);
+ backlight_step();
+ } else {
+ unregister_code(KC_RSFT);
+ midi_send_noteoff(&midi_device, 1, 64, 127);
+ }
+ break;
+ }
+ return MACRO_NONE;
+};
--- /dev/null
+#include "extended_keymap_common.h"
+#include "backlight.h"
+#include "action_layer.h"
+#include "lufa.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = { /* Qwerty */
+ {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL},
+ {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC},
+ {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT},
+ {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT},
+ {M(0), KC_LCTL, KC_LALT, KC_LGUI, FUNC(2), KC_SPC, KC_SPC, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
+ // Space is repeated to accommadate for both spacebar wiring positions
+},
+[1] = { /* Colemak */
+ {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL},
+ {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC},
+ {KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT},
+ {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT},
+ {KC_FN3, KC_LCTL, KC_LALT, KC_LGUI, FUNC(2), KC_SPC, KC_SPC, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
+},
+[2] = { /* RAISE */
+ {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL},
+ {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC},
+ {KC_TRNS, FUNC(3), FUNC(4), RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS},
+ {KC_TRNS, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
+ {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(1), KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
+},
+[3] = { /* LOWER */
+ {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL},
+ {S(KC_GRV), S(KC_1), S(KC_2), S(KC_3), S(KC_4), S(KC_5), S(KC_6), S(KC_7), S(KC_8), S(KC_9), S(KC_0), KC_BSPC},
+ {KC_TRNS, FUNC(3), FUNC(4), RESET, KC_TRNS, KC_TRNS, KC_TRNS, S(KC_MINS), S(KC_EQL), S(KC_LBRC), S(KC_RBRC), S(KC_BSLS)},
+ {KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_TRNS},
+ {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
+},
+[4] = { /* TENKEY */
+ {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL},
+ {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_KP_7, KC_KP_8, KC_KP_9, KC_P, KC_BSPC},
+ {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_KP_4, KC_KP_5, KC_KP_6, KC_SCLN, KC_QUOT},
+ {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_KP_1, KC_KP_2, KC_KP_3, KC_SLSH, KC_ENT},
+ {KC_TRNS, KC_LCTL, KC_LALT, KC_LGUI, KC_TRNS, KC_SPC, KC_SPC, KC_KP_0, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
+}
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+ [1] = ACTION_LAYER_MOMENTARY(2), // to RAISE
+ [2] = ACTION_LAYER_MOMENTARY(3), // to LOWER
+
+ [3] = ACTION_DEFAULT_LAYER_SET(0),
+ [4] = ACTION_DEFAULT_LAYER_SET(1),
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+ // MACRODOWN only works in this function
+ switch(id) {
+ case 0:
+ if (record->event.pressed) {
+ // register_code(KC_RSFT);
+ backlight_set(BACKLIGHT_LEVELS);
+ midi_send_noteon(&midi_device, 1, 64, 127);
+ layer_on(4);
+ } else {
+ // unregister_code(KC_RSFT);
+ backlight_set(0);
+ midi_send_noteoff(&midi_device, 1, 64, 127);
+ layer_clear();
+ }
+ break;
+ }
+ return MACRO_NONE;
+};
--- /dev/null
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <avr/io.h>
+#include "stdint.h"
+#include "led.h"
+
+
+void led_set(uint8_t usb_led)
+{
+ // // Using PE6 Caps Lock LED
+ // if (usb_led & (1<<USB_LED_CAPS_LOCK))
+ // {
+ // // Output high.
+ // DDRE |= (1<<6);
+ // PORTE |= (1<<6);
+ // }
+ // else
+ // {
+ // // Output low.
+ // DDRE &= ~(1<<6);
+ // PORTE &= ~(1<<6);
+ // }
+}
--- /dev/null
+/*
+Copyright 2012 Jun Wako
+Generated by planckkeyboard.com (2014 Jack Humbert)
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * scan matrix
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+
+#ifndef DEBOUNCE
+# define DEBOUNCE 10
+#endif
+static uint8_t debouncing = DEBOUNCE;
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+static matrix_row_t read_cols(void);
+static void init_cols(void);
+static void unselect_rows(void);
+static void select_row(uint8_t row);
+
+inline
+uint8_t matrix_rows(void)
+{
+ return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+ return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+ // To use PORTF disable JTAG with writing JTD bit twice within four cycles.
+ MCUCR |= (1<<JTD);
+ MCUCR |= (1<<JTD);
+
+ backlight_init_ports();
+
+ // Turn status LED on
+ DDRE |= (1<<6);
+ PORTE |= (1<<6);
+
+ // initialize row and col
+ unselect_rows();
+ init_cols();
+
+ // initialize matrix state: all keys off
+ for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+ matrix[i] = 0;
+ matrix_debouncing[i] = 0;
+ }
+}
+
+
+uint8_t matrix_scan(void)
+{
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ select_row(i);
+ _delay_us(30); // without this wait read unstable value.
+ matrix_row_t cols = read_cols();
+ if (matrix_debouncing[i] != cols) {
+ matrix_debouncing[i] = cols;
+ if (debouncing) {
+ debug("bounce!: "); debug_hex(debouncing); debug("\n");
+ }
+ debouncing = DEBOUNCE;
+ }
+ unselect_rows();
+ }
+
+ if (debouncing) {
+ if (--debouncing) {
+ _delay_ms(1);
+ } else {
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ matrix[i] = matrix_debouncing[i];
+ }
+ }
+ }
+
+ return 1;
+}
+
+bool matrix_is_modified(void)
+{
+ if (debouncing) return false;
+ return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+ return (matrix[row] & ((matrix_row_t)1<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+ return matrix[row];
+}
+
+void matrix_print(void)
+{
+ print("\nr/c 0123456789ABCDEF\n");
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ phex(row); print(": ");
+ pbin_reverse16(matrix_get_row(row));
+ print("\n");
+ }
+}
+
+uint8_t matrix_key_count(void)
+{
+ uint8_t count = 0;
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ count += bitpop16(matrix[i]);
+ }
+ return count;
+}
+
+static void init_cols(void)
+{
+ int B = 0, C = 0, D = 0, E = 0, F = 0;
+ for(int x = 0; x < MATRIX_COLS; x++) {
+ int col = COLS[x];
+ if ((col & 0xF0) == 0x20) {
+ B |= (1<<(col & 0x0F));
+ } else if ((col & 0xF0) == 0x30) {
+ C |= (1<<(col & 0x0F));
+ } else if ((col & 0xF0) == 0x40) {
+ D |= (1<<(col & 0x0F));
+ } else if ((col & 0xF0) == 0x50) {
+ E |= (1<<(col & 0x0F));
+ } else if ((col & 0xF0) == 0x60) {
+ F |= (1<<(col & 0x0F));
+ }
+ }
+ DDRB &= ~(B); PORTB |= (B);
+ DDRC &= ~(C); PORTC |= (C);
+ DDRD &= ~(D); PORTD |= (D);
+ DDRE &= ~(E); PORTE |= (E);
+ DDRF &= ~(F); PORTF |= (F);
+}
+
+static matrix_row_t read_cols(void)
+{
+ matrix_row_t result = 0;
+ for(int x = 0; x < MATRIX_COLS; x++) {
+ int col = COLS[x];
+ if ((col & 0xF0) == 0x20) {
+ result |= (PINB&(1<<(col & 0x0F)) ? 0 : (1<<x));
+ } else if ((col & 0xF0) == 0x30) {
+ result |= (PINC&(1<<(col & 0x0F)) ? 0 : (1<<x));
+ } else if ((col & 0xF0) == 0x40) {
+ result |= (PIND&(1<<(col & 0x0F)) ? 0 : (1<<x));
+ } else if ((col & 0xF0) == 0x50) {
+ result |= (PINE&(1<<(col & 0x0F)) ? 0 : (1<<x));
+ } else if ((col & 0xF0) == 0x60) {
+ result |= (PINF&(1<<(col & 0x0F)) ? 0 : (1<<x));
+ }
+ }
+ return result;
+}
+
+static void unselect_rows(void)
+{
+ int B = 0, C = 0, D = 0, E = 0, F = 0;
+ for(int x = 0; x < MATRIX_ROWS; x++) {
+ int row = ROWS[x];
+ if ((row & 0xF0) == 0x20) {
+ B |= (1<<(row & 0x0F));
+ } else if ((row & 0xF0) == 0x30) {
+ C |= (1<<(row & 0x0F));
+ } else if ((row & 0xF0) == 0x40) {
+ D |= (1<<(row & 0x0F));
+ } else if ((row & 0xF0) == 0x50) {
+ E |= (1<<(row & 0x0F));
+ } else if ((row & 0xF0) == 0x60) {
+ F |= (1<<(row & 0x0F));
+ }
+ }
+ DDRB &= ~(B); PORTB |= (B);
+ DDRC &= ~(C); PORTC |= (C);
+ DDRD &= ~(D); PORTD |= (D);
+ DDRE &= ~(E); PORTE |= (E);
+ DDRF &= ~(F); PORTF |= (F);
+}
+
+static void select_row(uint8_t row)
+{
+ int row_pin = ROWS[row];
+ if ((row_pin & 0xF0) == 0x20) {
+ DDRB |= (1<<(row_pin & 0x0F));
+ PORTB &= ~(1<<(row_pin & 0x0F));
+ } else if ((row_pin & 0xF0) == 0x30) {
+ DDRC |= (1<<(row_pin & 0x0F));
+ PORTC &= ~(1<<(row_pin & 0x0F));
+ } else if ((row_pin & 0xF0) == 0x40) {
+ DDRD |= (1<<(row_pin & 0x0F));
+ PORTD &= ~(1<<(row_pin & 0x0F));
+ } else if ((row_pin & 0xF0) == 0x50) {
+ DDRE |= (1<<(row_pin & 0x0F));
+ PORTE &= ~(1<<(row_pin & 0x0F));
+ } else if ((row_pin & 0xF0) == 0x60) {
+ DDRF |= (1<<(row_pin & 0x0F));
+ PORTF &= ~(1<<(row_pin & 0x0F));
+ }
+}
\ No newline at end of file
},
#endif
+#ifdef MIDI_ENABLE
.Audio_ControlInterface =
{
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
.Header = {.Size = sizeof(USB_Audio_Descriptor_Interface_AC_t), .Type = DTYPE_CSInterface},
.Subtype = AUDIO_DSUBTYPE_CSInterface_Header,
- .ACSpecification = VERSION_BCD(1,1,1),
+ .ACSpecification = VERSION_BCD(1,0,0),
.TotalLength = sizeof(USB_Audio_Descriptor_Interface_AC_t),
.InCollection = 1,
.Header = {.Size = sizeof(USB_MIDI_Descriptor_AudioInterface_AS_t), .Type = DTYPE_CSInterface},
.Subtype = AUDIO_DSUBTYPE_CSInterface_General,
- .AudioSpecification = VERSION_BCD(1,1,1),
+ .AudioSpecification = VERSION_BCD(1,0,0),
.TotalLength = (sizeof(USB_Descriptor_Configuration_t) -
offsetof(USB_Descriptor_Configuration_t, Audio_StreamInterface_SPC))
.EndpointAddress = (ENDPOINT_DIR_IN | MIDI_STREAM_IN_EPNUM),
.Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = MIDI_STREAM_EPSIZE,
- .PollingIntervalMS = 0x01
+ .PollingIntervalMS = 0x05
},
.Refresh = 0,
.EndpointAddress = (ENDPOINT_DIR_OUT | MIDI_STREAM_OUT_EPNUM),
.Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = MIDI_STREAM_EPSIZE,
- .PollingIntervalMS = 0x01
+ .PollingIntervalMS = 0x05
},
.Refresh = 0,
.TotalEmbeddedJacks = 0x01,
.AssociatedJackID = {0x03}
}
-
+#endif
};
USB_Descriptor_Endpoint_t NKRO_INEndpoint;
#endif
+#ifdef MIDI_ENABLE
// MIDI Audio Control Interface
USB_Descriptor_Interface_t Audio_ControlInterface;
USB_Audio_Descriptor_Interface_AC_t Audio_ControlInterface_SPC;
USB_MIDI_Descriptor_Jack_Endpoint_t MIDI_In_Jack_Endpoint_SPC;
USB_Audio_Descriptor_StreamEndpoint_Std_t MIDI_Out_Jack_Endpoint;
USB_MIDI_Descriptor_Jack_Endpoint_t MIDI_Out_Jack_Endpoint_SPC;
+#endif
} USB_Descriptor_Configuration_t;
# define NKRO_INTERFACE CONSOLE_INTERFACE
#endif
+#ifdef MIDI_ENABLE
+# define MIDI_INTERFACE (NKRO_INTERFACE + 1)
+#else
+# define MIDI_INTERFACE NKRO_INTERFACE
+#endif
/* nubmer of interfaces */
-#define TOTAL_INTERFACES (NKRO_INTERFACE + 3)
+#define TOTAL_INTERFACES (MIDI_INTERFACE + 1)
// Endopoint number and size
# endif
#endif
-#define MIDI_STREAM_IN_EPNUM (NKRO_IN_EPNUM + 1)
-#define MIDI_STREAM_OUT_EPNUM (NKRO_IN_EPNUM + 1)
+#ifdef MIDI_ENABLE
+# define MIDI_STREAM_IN_EPNUM (NKRO_IN_EPNUM + 1)
+# define MIDI_STREAM_OUT_EPNUM (NKRO_IN_EPNUM + 1)
+#else
+# define MIDI_STREAM_IN_EPNUM NKRO_IN_EPNUM
+# define MIDI_STREAM_OUT_EPNUM NKRO_IN_EPNUM
+#endif
#define KEYBOARD_EPSIZE 8
static void send_mouse(report_mouse_t *report);
static void send_system(uint16_t data);
static void send_consumer(uint16_t data);
+
+#ifdef MIDI_ENABLE
void usb_send_func(MidiDevice * device, uint16_t cnt, uint8_t byte0, uint8_t byte1, uint8_t byte2);
void usb_get_midi(MidiDevice * device);
void midi_usb_init(MidiDevice * device);
+#endif
+
host_driver_t lufa_driver = {
keyboard_leds,
send_keyboard,
send_mouse,
send_system,
send_consumer,
+#ifdef MIDI_ENABLE
usb_send_func,
usb_get_midi,
- midi_usb_init
+ midi_usb_init,
+#endif
+
};
void SetupHardware(void);
+
USB_ClassInfo_MIDI_Device_t USB_MIDI_Interface =
{
.Config =
{
- .StreamingInterfaceNumber = 1,
+ .StreamingInterfaceNumber = (NKRO_INTERFACE + 2),
.DataINEndpoint =
{
.Address = (ENDPOINT_DIR_IN | MIDI_STREAM_IN_EPNUM),
#define SYS_COMMON_3 0x30
+
/*******************************************************************************
* Console
******************************************************************************/
NKRO_EPSIZE, ENDPOINT_BANK_SINGLE);
#endif
+#ifdef MIDI_ENABLE
+ // ConfigSuccess &= MIDI_Device_ConfigureEndpoints(&USB_MIDI_Interface);
+
+ ConfigSuccess &= ENDPOINT_CONFIG(MIDI_STREAM_IN_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_IN,
+ MIDI_STREAM_EPSIZE, ENDPOINT_BANK_SINGLE);
+ ConfigSuccess &= ENDPOINT_CONFIG(MIDI_STREAM_OUT_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_OUT,
+ MIDI_STREAM_EPSIZE, ENDPOINT_BANK_SINGLE);
+#endif
- ConfigSuccess &= MIDI_Device_ConfigureEndpoints(&USB_MIDI_Interface);
}
+#ifdef MIDI_ENABLE
void usb_send_func(MidiDevice * device, uint16_t cnt, uint8_t byte0, uint8_t byte1, uint8_t byte2) {
MIDI_EventPacket_t event;
event.Data1 = byte0;
event.Data2 = byte1;
event.Data3 = byte2;
+ uint8_t cable = 0;
+
+Endpoint_SelectEndpoint(MIDI_STREAM_IN_EPNUM);
+
//if the length is undefined we assume it is a SYSEX message
if (midi_packet_length(byte0) == UNDEFINED) {
switch(cnt) {
case 3:
if (byte2 == SYSEX_END)
- event.Event = MIDI_EVENT(0, SYSEX_ENDS_IN_3);
+ event.Event = MIDI_EVENT(cable, SYSEX_ENDS_IN_3);
else
- event.Event = MIDI_EVENT(0, SYSEX_START_OR_CONT);
+ event.Event = MIDI_EVENT(cable, SYSEX_START_OR_CONT);
break;
case 2:
if (byte1 == SYSEX_END)
- event.Event = MIDI_EVENT(0, SYSEX_ENDS_IN_2);
+ event.Event = MIDI_EVENT(cable, SYSEX_ENDS_IN_2);
else
- event.Event = MIDI_EVENT(0, SYSEX_START_OR_CONT);
+ event.Event = MIDI_EVENT(cable, SYSEX_START_OR_CONT);
break;
case 1:
if (byte0 == SYSEX_END)
- event.Event = MIDI_EVENT(0, SYSEX_ENDS_IN_1);
+ event.Event = MIDI_EVENT(cable, SYSEX_ENDS_IN_1);
else
- event.Event = MIDI_EVENT(0, SYSEX_START_OR_CONT);
+ event.Event = MIDI_EVENT(cable, SYSEX_START_OR_CONT);
break;
default:
return; //invalid cnt
//TODO are there any more?
switch(byte0 & 0xF0){
case MIDI_SONGPOSITION:
- event.Event = MIDI_EVENT(0, SYS_COMMON_3);
+ event.Event = MIDI_EVENT(cable, SYS_COMMON_3);
break;
case MIDI_SONGSELECT:
case MIDI_TC_QUARTERFRAME:
- event.Event = MIDI_EVENT(0, SYS_COMMON_2);
+ event.Event = MIDI_EVENT(cable, SYS_COMMON_2);
break;
default:
- event.Event = MIDI_EVENT(0, byte0);
+ event.Event = MIDI_EVENT(cable, byte0);
break;
}
}
+Endpoint_Write_Stream_LE(&event, sizeof(event), NULL);
+Endpoint_ClearIN();
+
MIDI_Device_SendEventPacket(&USB_MIDI_Interface, &event);
MIDI_Device_Flush(&USB_MIDI_Interface);
MIDI_Device_USBTask(&USB_MIDI_Interface);
SetupHardware();
sei();
}
-
+#endif
print_set_sendchar(sendchar);
}
+#ifdef MIDI_ENABLE
void fallthrough_callback(MidiDevice * device,
uint16_t cnt, uint8_t byte0, uint8_t byte1, uint8_t byte2);
void cc_callback(MidiDevice * device,
uint8_t chan, uint8_t num, uint8_t val);
void sysex_callback(MidiDevice * device,
uint16_t start, uint8_t length, uint8_t * data);
+#endif
int main(void) __attribute__ ((weak));
int main(void)
{
//setup the device
+#ifdef MIDI_ENABLE
midi_device_init(&midi_device);
midi_device_set_send_func(&midi_device, usb_send_func);
midi_device_set_pre_input_process_func(&midi_device, usb_get_midi);
+#endif
SetupHardware();
sei();
+#ifdef MIDI_ENABLE
midi_register_fallthrough_callback(&midi_device, fallthrough_callback);
midi_register_cc_callback(&midi_device, cc_callback);
midi_register_sysex_callback(&midi_device, sysex_callback);
midi_send_cc(&midi_device, 15, 1, 0);
midi_send_noteon(&midi_device, 0, 64, 127);
midi_send_noteoff(&midi_device, 0, 64, 127);
+#endif
+
/* wait for USB startup & debug output */
while (USB_DeviceState != DEVICE_STATE_Configured) {
keyboard_task();
+#ifdef MIDI_ENABLE
midi_device_process(&midi_device);
+#endif
#if !defined(INTERRUPT_CONTROL_ENDPOINT)
USB_USBTask();
}
}
+#ifdef MIDI_ENABLE
//echo data back
void fallthrough_callback(MidiDevice * device,
uint16_t cnt, uint8_t byte0, uint8_t byte1, uint8_t byte2){
for (int i = 0; i < length; i++)
midi_send_cc(device, 15, 0x7F & data[i], 0x7F & (start + i));
}
+#endif
--- /dev/null
+/*\r
+ LUFA Library\r
+ Copyright (C) Dean Camera, 2012.\r
+\r
+ dean [at] fourwalledcubicle [dot] com\r
+ www.lufa-lib.org\r
+*/\r
+\r
+/*\r
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)\r
+\r
+ Permission to use, copy, modify, distribute, and sell this\r
+ software and its documentation for any purpose is hereby granted\r
+ without fee, provided that the above copyright notice appear in\r
+ all copies and that both that the copyright notice and this\r
+ permission notice and warranty disclaimer appear in supporting\r
+ documentation, and that the name of the author not be used in\r
+ advertising or publicity pertaining to distribution of the\r
+ software without specific, written prior permission.\r
+\r
+ The author disclaim all warranties with regard to this\r
+ software, including all implied warranties of merchantability\r
+ and fitness. In no event shall the author be liable for any\r
+ special, indirect or consequential damages or any damages\r
+ whatsoever resulting from loss of use, data or profits, whether\r
+ in an action of contract, negligence or other tortious action,\r
+ arising out of or in connection with the use or performance of\r
+ this software.\r
+*/\r
+\r
+/** \file\r
+ * \brief LUFA Library Configuration Header File\r
+ *\r
+ * This header file is used to configure LUFA's compile time options,\r
+ * as an alternative to the compile time constants supplied through\r
+ * a makefile.\r
+ *\r
+ * For information on what each token does, refer to the LUFA\r
+ * manual section "Summary of Compile Tokens".\r
+ */\r
+\r
+#ifndef _LUFA_CONFIG_H_\r
+#define _LUFA_CONFIG_H_\r
+\r
+ #if (ARCH == ARCH_AVR8)\r
+\r
+ /* Non-USB Related Configuration Tokens: */\r
+// #define DISABLE_TERMINAL_CODES\r
+\r
+ /* USB Class Driver Related Tokens: */\r
+// #define HID_HOST_BOOT_PROTOCOL_ONLY\r
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}\r
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}\r
+// #define HID_MAX_COLLECTIONS {Insert Value Here}\r
+// #define HID_MAX_REPORTITEMS {Insert Value Here}\r
+// #define HID_MAX_REPORT_IDS {Insert Value Here}\r
+// #define NO_CLASS_DRIVER_AUTOFLUSH\r
+\r
+ /* General USB Driver Related Tokens: */\r
+// #define ORDERED_EP_CONFIG\r
+ #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)\r
+ #define USB_DEVICE_ONLY\r
+// #define USB_HOST_ONLY\r
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}\r
+// #define NO_LIMITED_CONTROLLER_CONNECT\r
+// #define NO_SOF_EVENTS\r
+\r
+ /* USB Device Mode Driver Related Tokens: */\r
+// #define USE_RAM_DESCRIPTORS\r
+ #define USE_FLASH_DESCRIPTORS\r
+// #define USE_EEPROM_DESCRIPTORS\r
+// #define NO_INTERNAL_SERIAL\r
+ #define FIXED_CONTROL_ENDPOINT_SIZE 8\r
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}\r
+ #define FIXED_NUM_CONFIGURATIONS 1\r
+// #define CONTROL_ONLY_DEVICE\r
+// #define INTERRUPT_CONTROL_ENDPOINT\r
+// #define NO_DEVICE_REMOTE_WAKEUP\r
+// #define NO_DEVICE_SELF_POWER\r
+\r
+ /* USB Host Mode Driver Related Tokens: */\r
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}\r
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}\r
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}\r
+// #define NO_AUTO_VBUS_MANAGEMENT\r
+// #define INVERTED_VBUS_ENABLE_LINE\r
+\r
+ #else\r
+\r
+ #error Unsupported architecture for this LUFA configuration file.\r
+\r
+ #endif\r
+#endif\r
projects / qmk_firmware.git / commitdiff