From: Jack Humbert Date: Fri, 21 Aug 2015 14:46:53 +0000 (-0400) Subject: preonic X-Git-Url: https://git.donarmstrong.com/?p=qmk_firmware.git;a=commitdiff_plain;h=04885a3b447c82437d919d467328800eb00af629 preonic --- diff --git a/common.mk b/common.mk index b854f09cd..e61ae69e5 100644 --- a/common.mk +++ b/common.mk @@ -49,6 +49,10 @@ ifdef NKRO_ENABLE OPT_DEFS += -DNKRO_ENABLE endif +ifdef MIDI_ENABLE + OPT_DEFS += -DMIDI_ENABLE +endif + ifdef USB_6KRO_ENABLE OPT_DEFS += -DUSB_6KRO_ENABLE endif diff --git a/keyboard/atomic/README.md b/keyboard/atomic/README.md index ee824d26e..3ddaed3a3 100644 --- a/keyboard/atomic/README.md +++ b/keyboard/atomic/README.md @@ -1,9 +1,9 @@ -Planck keyboard firmware +Atomic keyboard firmware ====================== -DIY/Assembled compact ortholinear 40% keyboard by [Ortholinear Keyboards](http://ortholinearkeyboards.com). +DIY/Assembled ortholinear 60% keyboard by [Ortholinear Keyboards](http://ortholinearkeyboards.com). ## Extended Keymap -If you include extended_keymap_common.h instead of keymap_common.h at the top of your file, you'll have access to a bunch of goodies: +If you include extended_keymap_common.h instead of keymap_common.h at the top of your file, you'll have access to a bunch of goodies:t - Use `LSFT()`, `LCTL()`, et. al. (listed in extended_keymap_common.h) as modifiers for keys (daisy-chain-able) - Use `FUNC(1)` instead of `FN1` (etc.) to access the function layers beyond the 32 function layer limit diff --git a/keyboard/atomic_old/Makefile b/keyboard/atomic_old/Makefile new file mode 100644 index 000000000..c4e0cb45d --- /dev/null +++ b/keyboard/atomic_old/Makefile @@ -0,0 +1,135 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# Target file name (without extension). +TARGET = atomic_lufa + +# Directory common source filess exist +TOP_DIR = ../.. + +# Directory keyboard dependent files exist +TARGET_DIR = . + +# project specific files +SRC = keymap_common.c \ + matrix.c \ + led.c + +ifdef KEYMAP + SRC := keymap_$(KEYMAP).c $(SRC) +else + SRC := keymap_vlad.c $(SRC) +endif + +CONFIG_H = config.h + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA + + +# Optimize size but this may cause error "relocation truncated to fit" +#EXTRALDFLAGS = -Wl,--relax + +# Search Path +VPATH += $(TARGET_DIR) +VPATH += $(TOP_DIR) + +include $(TOP_DIR)/protocol/lufa.mk +include $(TOP_DIR)/common.mk +include $(TOP_DIR)/rules.mk diff --git a/keyboard/atomic_old/Makefile.pjrc b/keyboard/atomic_old/Makefile.pjrc new file mode 100644 index 000000000..9655ff65a --- /dev/null +++ b/keyboard/atomic_old/Makefile.pjrc @@ -0,0 +1,116 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# Target file name (without extension). +TARGET = gh60_pjrc + +# Directory common source filess exist +TOP_DIR = ../.. + +# Directory keyboard dependent files exist +TARGET_DIR = . + +# project specific files +SRC = keymap_common.c \ + matrix.c \ + led.c + +ifdef KEYMAP + SRC := keymap_$(KEYMAP).c $(SRC) +else + SRC := keymap_poker.c $(SRC) +endif + +CONFIG_H = config.h + + +# MCU name, you MUST set this to match the board you are using +# type "make clean" after changing this, so all files will be rebuilt +MCU = atmega32u4 +#MCU = at90usb1286 + + +# Processor frequency. +# Normally the first thing your program should do is set the clock prescaler, +# so your program will run at the correct speed. You should also set this +# variable to same clock speed. The _delay_ms() macro uses this, and many +# examples use this variable to calculate timings. Do not add a "UL" here. +F_CPU = 16000000 + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+5000) +EXTRAKEY_ENABLE = yes # Audio control and System control(+600) +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover(+500) +#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support + + +# Search Path +VPATH += $(TARGET_DIR) +VPATH += $(TOP_DIR) + +include $(TOP_DIR)/protocol/pjrc.mk +include $(TOP_DIR)/common.mk +include $(TOP_DIR)/rules.mk + +plain: OPT_DEFS += -DKEYMAP_PLAIN +plain: all + +poker: OPT_DEFS += -DKEYMAP_POKER +poker: all + +poker_set: OPT_DEFS += -DKEYMAP_POKER_SET +poker_set: all + +poker_bit: OPT_DEFS += -DKEYMAP_POKER_BIT +poker_bit: all diff --git a/keyboard/atomic_old/README 2.md b/keyboard/atomic_old/README 2.md new file mode 100644 index 000000000..510cb5c8b --- /dev/null +++ b/keyboard/atomic_old/README 2.md @@ -0,0 +1,141 @@ +GH60 keyboard firmware +====================== +DIY compact keyboard designed and run by komar007 and Geekhack community. + +- Both Rev.A and Rev.B PCB are supported by one firmware binary(issue #64) + +## GH60 Resources +- [KOMAR's project page](http://blog.komar.be/projects/gh60-programmable-keyboard/) +- [Prototyping](http://geekhack.org/index.php?topic=34959.0) +- [Rev.A PCB test](http://geekhack.org/index.php?topic=37570.0) +- [Rev.B PCB test](http://geekhack.org/index.php?topic=50685.0) +- [Group buy](http://geekhack.org/index.php?topic=41464.0) + + +## Build +Move to this directory then just run `make` like: + + $ make + +Use `make -f Makefile.pjrc` if you want to use PJRC stack but I find no reason to do so now. + + +## Keymap +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `keymap_.c` and see keymap document(you can find in top README.md) and existent keymap files. + +To build firmware binary hex file with a certain keymap just do `make` with `KEYMAP` option like: + + $ make KEYMAP=[poker|poker_set|poker_bit|plain|hasu|spacefn|hhkb|] + + +### 1 Poker +[keymap_poker.c](keymap_poker.c) emulates original Poker layers +while both [keymap_poker_bit.c](keymap_poker_bit.c) and [keymap_poker_set.c](keymap_poker_set.c) implements same layout in different way and they fix a minor issue of original Poker and enhance arrow keys. + + Fn + Esc = ` + Fn + {left, down, up, right} = {home, pgdown, pgup, end} + +#### 1.0 Default layer + ,-----------------------------------------------------------. + | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | + |-----------------------------------------------------------| + |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| + |-----------------------------------------------------------| + |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return | + |-----------------------------------------------------------| + |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | + |-----------------------------------------------------------| + |Ctrl|Gui |Alt | Space |Fn |Gui |App |Ctrl| + `-----------------------------------------------------------' +#### 1.1 Poker Fn layer + ,-----------------------------------------------------------. + |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| | + |-----------------------------------------------------------| + | |FnQ| Up| | | | | | |Cal| |Hom|Ins| | + |-----------------------------------------------------------| + | |Lef|Dow|Rig| | |Psc|Slk|Pau| |Tsk|End| | + |-----------------------------------------------------------| + | |Del| |Web|Mut|VoU|VoD| |PgU|PgD|Del| Up | + |-----------------------------------------------------------| + | | | | FnS |Fn |Left|Down|Righ| + `-----------------------------------------------------------' + + +### 2. Plain +Without any Fn layer this will be useful if you want to use key remapping tool like AHK on host. +See [keymap_plain.c](keymap_plain.c) for detail. + +#### 1.0 Plain Default layer + ,-----------------------------------------------------------. + |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | + |-----------------------------------------------------------| + |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| + |-----------------------------------------------------------| + |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return | + |-----------------------------------------------------------| + |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | + |-----------------------------------------------------------| + |Ctrl|Gui |Alt | Space |Alt |Gui |App |Ctrl| + `-----------------------------------------------------------' + + +### 3. Hasu +This is my favorite keymap with HHKB Fn, Vi cursor and Mousekey layer. See [keymap_hasu.c](keymap_hasu.c) for detail. + + +### 4. SpaceFN +This layout proposed by spiceBar uses space bar to change layer with using Dual role key technique. See [keymap_spacefn.c](keymap_spacefn.c) and [SpaceFN discussion](http://geekhack.org/index.php?topic=51069.0). + +#### 4.0 Default layer + ,-----------------------------------------------------------. + |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | + |-----------------------------------------------------------| + |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| + |-----------------------------------------------------------| + |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return | + |-----------------------------------------------------------| + |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | + |-----------------------------------------------------------| + |Ctrl|Gui |Alt | Space/Fn |Alt |Gui |App |Ctrl| + `-----------------------------------------------------------' +#### 4.1 SpaceFN layer + ,-----------------------------------------------------------. + |` | F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete | + |-----------------------------------------------------------| + | | | | | | | |Hom|Up |End|Psc|Slk|Pau|Ins | + |-----------------------------------------------------------| + | | | | | | |PgU|Lef|Dow|Rig| | | | + |-----------------------------------------------------------| + | | | | | |Spc|PgD|` |~ | | | | + |-----------------------------------------------------------| + | | | | Fn | | | | | + `-----------------------------------------------------------' + + +### 5. HHKB +[keymap_hhkb.c](keymap_hhkb.c) emulates original HHKB layers. +#### 5.0: Default layer + ,-----------------------------------------------------------. + |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| `| + |-----------------------------------------------------------| + |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]|Bspc | + |-----------------------------------------------------------| + |Ctrl | A| S| D| F| G| H| J| K| L|Fn3| '|Return | + |-----------------------------------------------------------| + |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |Fn | + |-----------------------------------------------------------| + | |Gui |Alt | Space | |Alt |Gui | | + `-----------------------------------------------------------' +#### 5.1: HHKB Fn layer + ,-----------------------------------------------------------. + |Pwr| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| + |-----------------------------------------------------------| + |Caps | | | | | | | |Psc|Slk|Pus|Up | | | + |-----------------------------------------------------------| + | |VoD|VoU|Mut|Ejc| | *| /|Hom|PgU|Lef|Rig|Enter | + |-----------------------------------------------------------| + | | | | | | | +| -|End|PgD|Dow| | | + |-----------------------------------------------------------| + | | | | | | | | | + `-----------------------------------------------------------' + diff --git a/keyboard/atomic_old/config.h b/keyboard/atomic_old/config.h new file mode 100644 index 000000000..5ea953805 --- /dev/null +++ b/keyboard/atomic_old/config.h @@ -0,0 +1,70 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Ortholinear Keyboards +#define PRODUCT Atomic Keyboard +#define DESCRIPTION t.m.k. keyboard firmware for Atomic + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + + + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboard/atomic_old/keymap_common.c b/keyboard/atomic_old/keymap_common.c new file mode 100644 index 000000000..fdb1769e1 --- /dev/null +++ b/keyboard/atomic_old/keymap_common.c @@ -0,0 +1,30 @@ +/* +Copyright 2012,2013 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include "keymap_common.h" + + +/* translates key to keycode */ +uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key) +{ + return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]); +} + +/* translates Fn keycode to action */ +action_t keymap_fn_to_action(uint8_t keycode) +{ + return (action_t){ .code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]) }; +} diff --git a/keyboard/atomic_old/keymap_common.h b/keyboard/atomic_old/keymap_common.h new file mode 100644 index 000000000..c582c0135 --- /dev/null +++ b/keyboard/atomic_old/keymap_common.h @@ -0,0 +1,87 @@ +/* +Copyright 2012,2013 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#ifndef KEYMAP_COMMON_H +#define KEYMAP_COMMON_H + +#include +#include +#include +#include "keycode.h" +#include "action.h" +#include "action_macro.h" +#include "report.h" +#include "host.h" +#include "print.h" +#include "debug.h" +#include "keymap.h" + + +extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS]; +extern const uint16_t fn_actions[]; + +// JCK: Semi-Standard layout +#define KEYMAP_JCK( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, K2E, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3C, K3D, K3E, \ + K40, K41, K43, K46, K4A, K4B, K4C, K4D, K4E \ +) { \ + { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_NO, KC_##K0E }, \ + { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E }, \ + { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_NO, KC_##K2D, KC_##K2E }, \ + { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_NO, KC_##K3C, KC_##K3D, KC_##K3E }, \ + { KC_##K40, KC_##K41, KC_NO, KC_##K43, KC_NO, KC_NO, KC_##K46, KC_NO, KC_NO, KC_NO, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E } \ +} + +// ASK: Short Space layout +#define KEYMAP_ASK_MESSY( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, K2E, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3C, K3D, K3E, \ + K40, K41, K43, K44, K46, K48, K49, K4A, K4B, K4C, K4D, K4E \ +) { \ + { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_NO, KC_##K0E }, \ + { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E }, \ + { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_NO, KC_##K2D, KC_##K2E }, \ + { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_NO, KC_##K3C, KC_##K3D, KC_##K3E }, \ + { KC_##K40, KC_##K41, KC_NO, KC_##K43, KC_##K44, KC_NO, KC_##K46, KC_NO, KC_##K48, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E } \ +} + +#define KEYMAP_ASK( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2E, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3E, \ + K40, K41, K43, K44, K46, K47, K48, K4A, K4B, K4C, K4D, K4E \ +) { \ + { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_NO, KC_##K0E }, \ + { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E }, \ + { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_NO, KC_##K2E }, \ + { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_NO, KC_##K3D, KC_##K3E }, \ + { KC_##K40, KC_##K41, KC_NO, KC_##K43, KC_##K44, KC_NO, KC_##K46, KC_##K47, KC_##K48, KC_NO, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E } \ +} + + +// MLO: Semi-Grid layout + +// KLN: Grid layout + +// PKR: Standard layout + +#endif diff --git a/keyboard/atomic_old/keymap_plain.c b/keyboard/atomic_old/keymap_plain.c new file mode 100644 index 000000000..e7f53649f --- /dev/null +++ b/keyboard/atomic_old/keymap_plain.c @@ -0,0 +1,46 @@ +#include "keymap_common.h" + +// JCK: Semi-Standard layout + +const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* 0: qwerty */ + [0] = KEYMAP_JCK(GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, BSPC, \ + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, BSLS, DEL, \ + ESC, A, S, D, F, G, H, J, K, L, SCLN, QUOT, ENT, MPLY, \ + LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT, VOLD, VOLU, \ + LCTL, LALT, LGUI, SPC, FN1, LEFT, DOWN, UP, RGHT), + [1] = KEYMAP_JCK(GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, BSPC, \ + TAB, Q, W, F, P, G, J, L, U, Y, SCLN, LBRC, RBRC, BSLS, DEL, \ + ESC, A, R, S, T, D, H, N, E, I, O, QUOT, ENT, MPLY, \ + LSFT, Z, X, C, V, B, K, M, COMM, DOT, SLSH, RSFT, VOLD, VOLU, \ + LCTL, LALT, LGUI, SPC, FN1, LEFT, DOWN, UP, RGHT), + [2] = KEYMAP_JCK(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, BSPC, \ + TAB, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, LBRC, RBRC, BSLS, DEL, \ + ESC, FN3, FN4, TRNS, TRNS, TRNS, TRNS, MINS, EQL, LBRC, RBRC, BSLS, ENT, MPLY, \ + LSFT, FN9, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT, VOLD, VOLU, \ + LCTL, LALT, LGUI, SPC, TRNS, MNXT, VOLD, VOLU, MPLY), +}; +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_MOMENTARY(2), // to Fn overlay + [3] = ACTION_DEFAULT_LAYER_SET(0), + [4] = ACTION_DEFAULT_LAYER_SET(1), + + [9] = ACTION_MODS_KEY(MOD_LSFT | MOD_RSFT, KC_PAUSE), + + [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1), + [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2), + [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3), + [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4), + [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5), + [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6), + [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7), + [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8), + [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9), + [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0), + [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS), + [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), + [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV), + [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC), + [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC), + [28] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS), +}; diff --git a/keyboard/atomic_old/keymap_ricky.c b/keyboard/atomic_old/keymap_ricky.c new file mode 100644 index 000000000..fcc91a1fa --- /dev/null +++ b/keyboard/atomic_old/keymap_ricky.c @@ -0,0 +1,15 @@ +#include "keymap_common.h" + +// JCK: Semi-Standard layout + +const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* 0: qwerty */ + [0] = KEYMAP_JCK(GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, BSPC, \ + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, BSLS, PSCR, \ + CAPS, A, S, D, F, G, H, J, K, L, SCLN, QUOT, ENT, INS, \ + LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT, UP, DEL, \ + LCTL, LGUI, LALT, SPC, RALT, RCTL, LEFT, DOWN, RGHT) +}; +const uint16_t PROGMEM fn_actions[] = { +}; + diff --git a/keyboard/atomic_old/keymap_vlad.c b/keyboard/atomic_old/keymap_vlad.c new file mode 100644 index 000000000..e56bcf161 --- /dev/null +++ b/keyboard/atomic_old/keymap_vlad.c @@ -0,0 +1,14 @@ +#include "keymap_common.h" + +// JCK: Semi-Standard layout + +const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* 0: qwerty */ + [0] = KEYMAP_ASK(GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, BSPC, \ + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, BSLS, DEL, \ + CAPS, A, S, D, F, G, H, J, K, L, SCLN, QUOT, ENT, VOLU, \ + LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT, UP, VOLD, \ + LCTL, LGUI, LALT, LGUI, SPC, RGUI, RALT, RGUI, RCTL, LEFT, DOWN, RGHT) +}; +const uint16_t PROGMEM fn_actions[] = { +}; \ No newline at end of file diff --git a/keyboard/atomic_old/led.c b/keyboard/atomic_old/led.c new file mode 100644 index 000000000..2d52fbf1c --- /dev/null +++ b/keyboard/atomic_old/led.c @@ -0,0 +1,25 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include +#include "stdint.h" +#include "led.h" + + +void led_set(uint8_t usb_led) +{ +} diff --git a/keyboard/atomic_old/matrix.c b/keyboard/atomic_old/matrix.c new file mode 100644 index 000000000..98102cb69 --- /dev/null +++ b/keyboard/atomic_old/matrix.c @@ -0,0 +1,211 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +/* + * scan matrix + */ +#include +#include +#include +#include +#include "action_layer.h" +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" + + +#ifndef DEBOUNCE +# define DEBOUNCE 10 +#endif +static uint8_t debouncing = DEBOUNCE; + +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; + +static matrix_row_t read_cols(void); +static void init_cols(void); +static void unselect_rows(void); +static void select_row(uint8_t row); + + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + + +void matrix_init(void) +{ + // initialize row and col + unselect_rows(); + init_cols(); + + // initialize matrix state: all keys off + for (uint8_t i=0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + matrix_debouncing[i] = 0; + } +} + +uint8_t matrix_scan(void) +{ + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + select_row(i); + _delay_us(30); // without this wait read unstable value. + matrix_row_t cols = read_cols(); + if (matrix_debouncing[i] != cols) { + matrix_debouncing[i] = cols; + if (debouncing) { + debug("bounce!: "); debug_hex(debouncing); debug("\n"); + } + debouncing = DEBOUNCE; + } + unselect_rows(); + } + + if (debouncing) { + if (--debouncing) { + _delay_ms(1); + } else { + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + matrix[i] = matrix_debouncing[i]; + } + } + } + + + return 1; +} + +bool matrix_is_modified(void) +{ + if (debouncing) return false; + return true; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & ((matrix_row_t)1<. #ifndef CONFIG_H #define CONFIG_H +#include "config_definitions.h" /* USB Device descriptor parameter */ #define VENDOR_ID 0xFEED @@ -31,6 +32,10 @@ along with this program. If not, see . #define MATRIX_ROWS 4 #define MATRIX_COLS 12 +/* Planck PCB default pin-out */ +#define COLS (int []){ F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7 } +#define ROWS (int []){ D0, D5, B5, B6 } + /* define if matrix has ghost */ //#define MATRIX_HAS_GHOST diff --git a/keyboard/planck/config_definitions.h b/keyboard/planck/config_definitions.h new file mode 100644 index 000000000..fd138b884 --- /dev/null +++ b/keyboard/planck/config_definitions.h @@ -0,0 +1,50 @@ +#ifndef CONFIG_DEFINITIONS_H +#define CONFIG_DEFINITIONS_H + +#define B0 0x20 +#define B1 0x21 +#define B2 0x22 +#define B3 0x23 +#define B4 0x24 +#define B5 0x25 +#define B6 0x26 +#define B7 0x27 +#define C0 0x30 +#define C1 0x31 +#define C2 0x32 +#define C3 0x33 +#define C4 0x34 +#define C5 0x35 +#define C6 0x36 +#define C7 0x37 +#define D0 0x40 +#define D1 0x41 +#define D2 0x42 +#define D3 0x43 +#define D4 0x44 +#define D5 0x45 +#define D6 0x46 +#define D7 0x47 +#define E0 0x50 +#define E1 0x51 +#define E2 0x52 +#define E3 0x53 +#define E4 0x54 +#define E5 0x55 +#define E6 0x56 +#define E7 0x57 +#define F0 0x60 +#define F1 0x61 +#define F2 0x62 +#define F3 0x63 +#define F4 0x64 +#define F5 0x65 +#define F6 0x66 +#define F7 0x67 + + + + + +#endif + diff --git a/keyboard/planck/extended_keymaps/extended_keymap_default.c b/keyboard/planck/extended_keymaps/extended_keymap_default.c index 710611c3c..c75144bf4 100644 --- a/keyboard/planck/extended_keymaps/extended_keymap_default.c +++ b/keyboard/planck/extended_keymaps/extended_keymap_default.c @@ -1,6 +1,7 @@ #include "extended_keymap_common.h" #include "backlight.h" #include "lufa.h" +#include "debug.h" const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = { /* Qwerty */ @@ -51,18 +52,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) switch(id) { case 0: if (record->event.pressed) { - if (!&midi_device) { - register_code(KC_RSFT); - } else { - midi_send_noteon(&midi_device, 1, 64, 127); - } + register_code(KC_RSFT); + midi_send_noteon(&midi_device, 1, 64, 127); backlight_step(); } else { - if (!&midi_device) { - unregister_code(KC_RSFT); - } else { - midi_send_noteoff(&midi_device, 1, 64, 127); - } + unregister_code(KC_RSFT); + midi_send_noteoff(&midi_device, 1, 64, 127); } break; } diff --git a/keyboard/planck/matrix.c b/keyboard/planck/matrix.c new file mode 100644 index 000000000..58bd61f75 --- /dev/null +++ b/keyboard/planck/matrix.c @@ -0,0 +1,235 @@ +/* +Copyright 2012 Jun Wako +Generated by planckkeyboard.com (2014 Jack Humbert) + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +/* + * scan matrix + */ +#include +#include +#include +#include +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" +#include "backlight.h" // TODO fix this dependency + +#ifndef DEBOUNCE +# define DEBOUNCE 10 +#endif +static uint8_t debouncing = DEBOUNCE; + +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; + +static matrix_row_t read_cols(void); +static void init_cols(void); +static void unselect_rows(void); +static void select_row(uint8_t row); + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + +void matrix_init(void) +{ + // To use PORTF disable JTAG with writing JTD bit twice within four cycles. + MCUCR |= (1<Preferences->Downloads`. +2. Install [DFU-Programmer][dfu-prog]. + +### Linux +1. Install AVR GCC with your favorite package manager. +2. Install [DFU-Programmer][dfu-prog]. + +##Verify Your Installation +1. Clone the following repository: https://github.com/jackhumbert/tmk_keyboard +2. Open a Terminal and `cd` into `tmk_keyboard/keyboard/planck` +3. Run `make`. This should output a lot of information about the build process. + +## Using the built-in functions + +Here is a list of some of the functions available from the command line: + +* `make clean`: clean the environment - may be required in-between builds +* `make`: compile the code +* `make COMMON=true`: compile with the common (non-extended) keymap +* `make MATRIX=`: compile with the referenced matrix file. Default if unspecified is `matrix_pcb.c`. For handwired boards, use `matrix_handwired.c`. +* `make KEYMAP=`: compile with the extended keymap file `extended_keymaps/extended_keymap_.c` +* `make COMMON=true KEYMAP=`: compile with the common keymap file `common_keymaps/keymap_.c` +* `make dfu`: build and flash the layout to the PCB +* `make dfu-force`: build and force-flash the layout to the PCB (may be require for first flash) + +Generally, the instructions to flash the PCB are as follows: + +1. Make changes to the appropriate keymap file +2. Save the file +3. `make clean` +4. Press the reset button on the PCB/press the key with the `RESET` keycode +5. `make dfu` - use the necessary `KEYMAP=` and/or `COMMON=true` arguments here. + +## Extended keymap + +### Keymap + +Unlike the common keymap, prefixing the keycodes with `KC_` is required. A full list of the keycodes is available [here](https://github.com/jackhumbert/tmk_keyboard/blob/master/doc/keycode.txt). For the keycodes available only in the extended keymap, see this [header file](https://github.com/jackhumbert/tmk_keyboard/blob/master/keyboard/planck/extended_keymap_common.h). + +You can use modifiers with keycodes like this: + + LCTL(KC_C) + +Which will generate Ctrl+c. These are daisy-chainable, meaning you can do things like: + + LCTL(LALT(KC_C)) + +That will generate Ctrl+Alt+c. The entire list of these functions is here: + +* `LCTL()`: Left control +* `LSFT()` / `S()`: Left shift +* `LALT()`: Left alt/opt +* `LGUI()`: Left win/cmd +* `RCTL()`: Right control +* `RSFT()`: Right shift +* `RALT()`: Right alt/opt +* `RGUI()`: Right win/cmd + +`S(KC_1)`-like entries are useful in writing keymaps for the Planck. + +### Other keycodes + +A number of other keycodes have been added that you may find useful: + +* `CM_`: the Colemak equivalent of a key (in place of `KC_`), when using Colemak in software (`CM_O` generates `KC_SCLN`) +* `RESET`: jump to bootloader for flashing (same as press the reset button) +* `BL_STEP`: step through the backlight brightnesses +* `BL_<0-15>`: set backlight brightness to 0-15 +* `BL_DEC`: lower the backlight brightness +* `BL_INC`: raise the backlight brightness +* `BL_TOGG`: toggle the backlight on/off + +### Function layers + +The extended keymap extends the number of function layers from 32 to the near-infinite value of 256. Rather than using `FN` notation (still available, but limited to `FN0`-`FN31`), you can use the `FUNC()` notation. `F()` is a shortcut for this. + +The function actions are unchanged, and you can see the full list of them [here](https://github.com/jackhumbert/tmk_keyboard/blob/master/common/action_code.h). They are explained in detail [here](https://github.com/jackhumbert/tmk_keyboard/blob/master/doc/keymap.md#2-action). + +### Macros + +Macros have been setup in the `extended_keymaps/extended_keymaps_default.c` file so that you can use `M()` to access a macro in the `action_get_macro` section on your keymap. The switch/case structure you see here is required, and is setup for `M(0)` - you'll need to copy and paste the code to look like this (e.g. to support `M(3)`): + + switch(id) { + case 0: + return MACRODOWN(TYPE(KC_A), END); + break; + case 1: + return MACRODOWN(TYPE(KC_B), END); + break; + case 2: + return MACRODOWN(TYPE(KC_C), END); + break; + case 3: + return MACRODOWN(TYPE(KC_D), END); + break; + } + return MACRO_NONE; + +`MACRODOWN()` is a shortcut for `(record->event.pressed ? MACRO(__VA_ARGS__) : MACRO_NONE)` which tells the macro to execute when the key is pressed. Without this, the macro will be executed on both the down and up stroke. + +[cygwin]: https://www.cygwin.com/ +[mingw]: http://www.mingw.org/ +[mhv]: https://infernoembedded.com/products/avr-tools +[winavr]: http://winavr.sourceforge.net/ +[crosspack]: http://www.obdev.at/products/crosspack/index.html +[dfu-prog]: http://dfu-programmer.sourceforge.net/ diff --git a/keyboard/preonic/README.md b/keyboard/preonic/README.md new file mode 100644 index 000000000..ee824d26e --- /dev/null +++ b/keyboard/preonic/README.md @@ -0,0 +1,56 @@ +Planck keyboard firmware +====================== +DIY/Assembled compact ortholinear 40% keyboard by [Ortholinear Keyboards](http://ortholinearkeyboards.com). + +## Extended Keymap +If you include extended_keymap_common.h instead of keymap_common.h at the top of your file, you'll have access to a bunch of goodies: + +- Use `LSFT()`, `LCTL()`, et. al. (listed in extended_keymap_common.h) as modifiers for keys (daisy-chain-able) +- Use `FUNC(1)` instead of `FN1` (etc.) to access the function layers beyond the 32 function layer limit +- Use `CM_F` instead of `KC_F` to get the ColeMak equivilent for shortcuts (maps backwards) +- Use `MACRODOWN()` instead of `MACRO()` to easily make a keydown macro (`CM_*` works here too) + +### Some notes on usage: + +- The `KEYMAP()` macro is unable to be used due to the bitwise modifications that take place - refer to extended_keymap_jack.c to see how to set things up with the `KC_` prefix +- Keep an eye on the Makefile - this needs to include the correct files to work +- Don't forget to use `const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {` instead of the 8bit equivilent + +## Build + +Follow [this guide](http://deskthority.net/workshop-f7/how-to-build-your-very-own-keyboard-firmware-t7177.html) to setup your development environment before anything else. Abbreviated instructions are provide at the [bottom of this document](https://github.com/rswiernik/tmk_keyboard/tree/rswiernik_dev/keyboard/planck#environment-setup) + +Download the whole firmware [here](https://github.com/jackhumbert/tmk_keyboard/archive/master.zip) and navigate to the keyboard/planck folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex that you can load with the Teensy app onto your Planck (once you've hit reset/shorted GND & RST). + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +####Default +To build with the default keymap, simply move to the tmk\_keyboard/keyboard/planck/ and run `make` as follows: +``` +$ make +``` + +## Keymap +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `keymap_.c` and see keymap document (you can find in top README.md) and existent keymap files. + +####**Extended Keymaps** + +To build the firmware binary hex file with an extended keymap just do `make` with `KEYMAP` option like: +``` +$ make KEYMAP=[common|jack|] +``` +_The only applicable keymaps will work with this option._ Extended keymaps follow the format **__extended\_keymap\_\.c__** + +####**Common Keymaps** + +Building with a common keymap is as simple as adding the COMMON option. Note that only +``` +$ make KEYMAP=[common|jack|] COMMON=true +``` +_The only applicable keymaps will work with this option._ Common keymaps follow the format **__keymap\_\.c__** + +## Notable TMK forks (which some of the keymap files are from) +- [Shane's Fork](https://github.com/shanecelis/tmk_keyboard/tree/master/keyboard/planck) +- [Pierre's Fork](https://github.com/pcarrier/tmk_keyboard/blob/pcarrier/planck/keyboard/gh60/keymap_planck.c) +- [Nathan's Fork](https://github.com/nathanrosspowell/tmk_keyboard/tree/planck-jack/keyboard/planck) +- [Matthew's Fork](https://github.com/pepers/tmk_keyboard/tree/master/keyboard/planck_grid) diff --git a/keyboard/preonic/__avr_gdbinit b/keyboard/preonic/__avr_gdbinit new file mode 100644 index 000000000..afc51e6d1 --- /dev/null +++ b/keyboard/preonic/__avr_gdbinit @@ -0,0 +1,6 @@ +define reset +SIGNAL SIGHUP +end +file planck_lufa.elf +target remote localhost:4242 +break main diff --git a/keyboard/preonic/analog.c b/keyboard/preonic/analog.c new file mode 100644 index 000000000..49b84ee0e --- /dev/null +++ b/keyboard/preonic/analog.c @@ -0,0 +1,53 @@ +// Simple analog to digitial conversion + +#include +#include +#include +#include "analog.h" + + +static uint8_t aref = (1<= 12) return 0; + return adc_read(pgm_read_byte(pin_to_mux + pin)); +#elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__) + if (pin >= 8) return 0; + return adc_read(pin); +#else + return 0; +#endif +} + +// Mux input +int16_t adc_read(uint8_t mux) +{ +#if defined(__AVR_AT90USB162__) + return 0; +#else + uint8_t low; + + ADCSRA = (1< + +void analogReference(uint8_t mode); +int16_t analogRead(uint8_t pin); +int16_t adc_read(uint8_t mux); + +#define ADC_REF_POWER (1< +#include "backlight.h" + +#define CHANNEL OCR1C + +void backlight_init_ports() +{ + + // Setup PB7 as output and output low. + DDRB |= (1<<7); + PORTB &= ~(1<<7); + + // Use full 16-bit resolution. + ICR1 = 0xFFFF; + + // I could write a wall of text here to explain... but TL;DW + // Go read the ATmega32u4 datasheet. + // And this: http://blog.saikoled.com/post/43165849837/secret-konami-cheat-code-to-high-resolution-pwm-on + + // Pin PB7 = OCR1C (Timer 1, Channel C) + // Compare Output Mode = Clear on compare match, Channel C = COM1C1=1 COM1C0=0 + // (i.e. start high, go low when counter matches.) + // WGM Mode 14 (Fast PWM) = WGM13=1 WGM12=1 WGM11=1 WGM10=0 + // Clock Select = clk/1 (no prescaling) = CS12=0 CS11=0 CS10=1 + + TCCR1A = _BV(COM1C1) | _BV(WGM11); // = 0b00001010; + TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001; + + backlight_init(); +} + +void backlight_set(uint8_t level) +{ + if ( level == 0 ) + { + // Turn off PWM control on PB7, revert to output low. + TCCR1A &= ~(_BV(COM1C1)); + CHANNEL = 0x0; + // Prevent backlight blink on lowest level + PORTB &= ~(_BV(PORTB7)); + } + else if ( level == BACKLIGHT_LEVELS ) + { + // Prevent backlight blink on lowest level + PORTB &= ~(_BV(PORTB7)); + // Turn on PWM control of PB7 + TCCR1A |= _BV(COM1C1); + // Set the brightness + CHANNEL = 0xFFFF; + } + else + { + // Prevent backlight blink on lowest level + PORTB &= ~(_BV(PORTB7)); + // Turn on PWM control of PB7 + TCCR1A |= _BV(COM1C1); + // Set the brightness + CHANNEL = 0xFFFF >> ((BACKLIGHT_LEVELS - level) * ((BACKLIGHT_LEVELS + 1) / 2)); + } +} \ No newline at end of file diff --git a/keyboard/preonic/beeps.c b/keyboard/preonic/beeps.c new file mode 100644 index 000000000..13e46e1da --- /dev/null +++ b/keyboard/preonic/beeps.c @@ -0,0 +1,238 @@ +#include "beeps.h" +#include +#include +#include +#include + +#define PI 3.14159265 +#define CHANNEL OCR1C + +volatile uint16_t sample; +uint16_t lastSample; + +const int sounddata_length=200; + +const unsigned char sounddata_data[] PROGMEM = {128, +128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, +128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, +128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, +128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, +128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, +128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, +128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, +128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, +128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, +128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 129, 127, 129, 128, 127, 133, +117, 109, 125, 121, 116, 132, 140, 126, 114, 114, 116, 120, 114, 93, 73, 66, 76, 116, 142, 129, +128, 129, 120, 119, 118, 104, 87, 123, 181, 194, 196, 198, 189, 176, 160, 162, 172, 164, 164, 183, +197, 188, 168, 167, 170, 165, 185, 209, 206, 196, 196, 199, 185, 162, 156, 167, 176, 173, 170, 166, +151, 142, 140, 134, 130, 127, 113, 86, 67, 66, 69, 75, 73, 75, 86, 90, 91, 84, 65, 48, +41, 30, 26, 56, 91, 88, 72, 70, 73, 82, 89, 73, 57, 60, 74, 89, 92, 77, 63, 60, +53, 47, 56, 64, 63, 61, 56, 54, 52, 36, 16, 22, 51, 66, 67, 70, 76, 88, 99, 92, +77, 74, 85, 100, 106, 97, 83, 85, 96, 108, 133, 160, 164}; + +void delay_us(int count) { + while(count--) { + _delay_us(1); + } +} + +void beeps() { + // DDRB |= (1<<7); + // PORTB &= ~(1<<7); + + // // Use full 16-bit resolution. + // ICR1 = 0xFFFF; + + // // I could write a wall of text here to explain... but TL;DW + // // Go read the ATmega32u4 datasheet. + // // And this: http://blog.saikoled.com/post/43165849837/secret-konami-cheat-code-to-high-resolution-pwm-on + + // // Pin PB7 = OCR1C (Timer 1, Channel C) + // // Compare Output Mode = Clear on compare match, Channel C = COM1C1=1 COM1C0=0 + // // (i.e. start high, go low when counter matches.) + // // WGM Mode 14 (Fast PWM) = WGM13=1 WGM12=1 WGM11=1 WGM10=0 + // // Clock Select = clk/1 (no prescaling) = CS12=0 CS11=0 CS10=1 + + // TCCR1A = _BV(COM1C1) | _BV(WGM11); // = 0b00001010; + // TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001; + + + // // Turn off PWM control on PB7, revert to output low. + // // TCCR1A &= ~(_BV(COM1C1)); + // // CHANNEL = ((1 << level) - 1); + + // // Turn on PWM control of PB7 + // TCCR1A |= _BV(COM1C1); + // // CHANNEL = level << OFFSET | 0x0FFF; + // // CHANNEL = 0b1010101010101010; + + // float x = 12; + // float y = 24; + // float length = 50; + // float scale = 1; + + // // int f1 = 1000000/440; + // // int f2 = 1000000/880; + // // for (uint32_t i = 0; i < length * 1000; i++) { + // // // int frequency = 1/((sin(PI*2*i*scale*pow(2, x/12.0))*.5+1 + sin(PI*2*i*scale*pow(2, y/12.0))*.5+1) / 2); + + // // ICR1 = f1; // Set max to the period + // // OCR1C = f1 >> 1; // Set compare to half the period + // // // _delay_us(10); + // // } + // int frequency = 1000000/440; + // ICR1 = frequency; // Set max to the period + // OCR1C = frequency >> 1; // Set compare to half the period + // _delay_us(500000); + + // TCCR1A &= ~(_BV(COM1C1)); + // CHANNEL = 0; +play_notes(); + + + // play_note(55*pow(2, 0/12.0), 1); + // play_note(55*pow(2, 12/12.0), 1); + // play_note(55*pow(2, 24/12.0), 1); + // play_note(55*pow(2, 0/12.0), 1); + // play_note(55*pow(2, 12/12.0), 1); + // play_note(55*pow(2, 24/12.0), 1); + + // play_note(0, 4); + + // play_note(55*pow(2, 0/12.0), 8); + // play_note(55*pow(2, 12/12.0), 4); + // play_note(55*pow(2, 10/12.0), 4); + // play_note(55*pow(2, 12/12.0), 8); + // play_note(55*pow(2, 10/12.0), 4); + // play_note(55*pow(2, 7/12.0), 2); + // play_note(55*pow(2, 8/12.0), 2); + // play_note(55*pow(2, 7/12.0), 16); + // play_note(0, 4); + // play_note(55*pow(2, 3/12.0), 8); + // play_note(55*pow(2, 5/12.0), 4); + // play_note(55*pow(2, 7/12.0), 4); + // play_note(55*pow(2, 7/12.0), 8); + // play_note(55*pow(2, 5/12.0), 4); + // play_note(55*pow(2, 3/12.0), 4); + // play_note(55*pow(2, 2/12.0), 16); + + +} + +void play_note(float freq, int length) { + DDRB |= (1<<7); + PORTB &= ~(1<<7); + + if (freq > 0) { + int frequency = 1000000/freq; + ICR1 = frequency; // Set max to the period + OCR1C = frequency >> 1; // Set compare to half the period + + TCCR1A = _BV(COM1C1) | _BV(WGM11); // = 0b00001010; + TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001; + } + + for (int i = 0; i < length; i++) { + _delay_us(50000); + } + + TCCR1A &= ~(_BV(COM1C1)); +} + +// This is called at 8000 Hz to load the next sample. +ISR(TIMER1_COMPA_vect) { + if (sample >= sounddata_length) { + if (sample == sounddata_length + lastSample) { + TIMSK1 &= ~_BV(OCIE1A); + + // Disable the per-sample timer completely. + TCCR1B &= ~_BV(CS10); + } + else { + OCR1C = sounddata_length + lastSample - sample; + } + } + else { + OCR1C = pgm_read_byte(&sounddata_data[sample]); + } + + ++sample; +} + +void play_notes() { + + + // Set up Timer 2 to do pulse width modulation on the speaker + // pin. + + DDRB |= (1<<7); + PORTB &= ~(1<<7); + + // Use internal clock (datasheet p.160) + // ASSR &= ~(_BV(EXCLK) | _BV(AS2)); + + // Set fast PWM mode (p.157) + TCCR1A |= _BV(WGM21) | _BV(WGM20); + TCCR1B &= ~_BV(WGM22); + + // Do non-inverting PWM on pin OC2A (p.155) + // On the Arduino this is pin 11. + TCCR1A = (TCCR2A | _BV(COM2A1)) & ~_BV(COM2A0); + TCCR1A &= ~(_BV(COM2B1) | _BV(COM2B0)); + // No prescaler (p.158) + TCCR1B = (TCCR1B & ~(_BV(CS12) | _BV(CS11))) | _BV(CS10); + + // Set initial pulse width to the first sample. + OCR1A = pgm_read_byte(&sounddata_data[0]); + + + + + cli(); + + // Set CTC mode (Clear Timer on Compare Match) (p.133) + // Have to set OCR1A *after*, otherwise it gets reset to 0! + TCCR2B = (TCCR2B & ~_BV(WGM13)) | _BV(WGM12); + TCCR2A = TCCR2A & ~(_BV(WGM11) | _BV(WGM10)); + + // No prescaler (p.134) + TCCR2B = (TCCR2B & ~(_BV(CS12) | _BV(CS11))) | _BV(CS10); + + // Set the compare register (OCR1A). + // OCR1A is a 16-bit register, so we have to do this with + // interrupts disabled to be safe. + // OCR2A = F_CPU / SAMPLE_RATE; // 16e6 / 8000 = 2000 + OCR2A = 2000; + + // Enable interrupt when TCNT1 == OCR1A (p.136) + TIMSK1 |= _BV(OCIE2A); + + sample = 0; + sei(); +} + +void note(int x, float length) { + DDRB |= (1<<1); + int t = (int)(440*pow(2,-x/12.0)); // starting note + for (int y = 0; y < length*1000/t; y++) { // note length + PORTB |= (1<<1); + delay_us(t); + PORTB &= ~(1<<1); + delay_us(t); + } + PORTB &= ~(1<<1); +} + +void true_note(float x, float y, float length) { + for (uint32_t i = 0; i < length * 50; i++) { + uint32_t v = (uint32_t) (round(sin(PI*2*i*640000*pow(2, x/12.0))*.5+1 + sin(PI*2*i*640000*pow(2, y/12.0))*.5+1) / 2 * pow(2, 8)); + for (int u = 0; u < 8; u++) { + if (v & (1 << u) && !(PORTB&(1<<1))) + PORTB |= (1<<1); + else if (PORTB&(1<<1)) + PORTB &= ~(1<<1); + } + } + PORTB &= ~(1<<1); +} \ No newline at end of file diff --git a/keyboard/preonic/beeps.h b/keyboard/preonic/beeps.h new file mode 100644 index 000000000..3e3c634ff --- /dev/null +++ b/keyboard/preonic/beeps.h @@ -0,0 +1,9 @@ +#include +#include +#include +#include + +void note(int x, float length); +void beeps(); +void true_note(float x, float y, float length); +void play_note(float freq, int length); \ No newline at end of file diff --git a/keyboard/preonic/config.h b/keyboard/preonic/config.h new file mode 100644 index 000000000..00486c470 --- /dev/null +++ b/keyboard/preonic/config.h @@ -0,0 +1,76 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_definitions.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Ortholinear Keyboards +#define PRODUCT The Preonic Keyboard +#define DESCRIPTION A compact ortholinear keyboard + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 12 + +/* Planck PCB default pin-out */ +#define COLS (int []){ F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7 } +#define ROWS (int []){ D1, D0, D5, B5, B6 } + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +#define NO_DEBUG + +/* disable print */ +#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboard/preonic/config_definitions.h b/keyboard/preonic/config_definitions.h new file mode 100644 index 000000000..fd138b884 --- /dev/null +++ b/keyboard/preonic/config_definitions.h @@ -0,0 +1,50 @@ +#ifndef CONFIG_DEFINITIONS_H +#define CONFIG_DEFINITIONS_H + +#define B0 0x20 +#define B1 0x21 +#define B2 0x22 +#define B3 0x23 +#define B4 0x24 +#define B5 0x25 +#define B6 0x26 +#define B7 0x27 +#define C0 0x30 +#define C1 0x31 +#define C2 0x32 +#define C3 0x33 +#define C4 0x34 +#define C5 0x35 +#define C6 0x36 +#define C7 0x37 +#define D0 0x40 +#define D1 0x41 +#define D2 0x42 +#define D3 0x43 +#define D4 0x44 +#define D5 0x45 +#define D6 0x46 +#define D7 0x47 +#define E0 0x50 +#define E1 0x51 +#define E2 0x52 +#define E3 0x53 +#define E4 0x54 +#define E5 0x55 +#define E6 0x56 +#define E7 0x57 +#define F0 0x60 +#define F1 0x61 +#define F2 0x62 +#define F3 0x63 +#define F4 0x64 +#define F5 0x65 +#define F6 0x66 +#define F7 0x67 + + + + + +#endif + diff --git a/keyboard/preonic/extended_keymap_common.c b/keyboard/preonic/extended_keymap_common.c new file mode 100644 index 000000000..ade850844 --- /dev/null +++ b/keyboard/preonic/extended_keymap_common.c @@ -0,0 +1,210 @@ +/* +Copyright 2012,2013 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include "extended_keymap_common.h" +#include "report.h" +#include "keycode.h" +#include "action_layer.h" +#include "action.h" +#include "action_macro.h" +#include "debug.h" +#include "backlight.h" + +static action_t keycode_to_action(uint16_t keycode); + + +/* converts key to action */ +action_t action_for_key(uint8_t layer, keypos_t key) +{ + // 16bit keycodes - important + uint16_t keycode = keymap_key_to_keycode(layer, key); + + if (keycode >= 0x0100 && keycode < 0x2000) { + // Has a modifier + action_t action; + // Split it up + action.code = ACTION_MODS_KEY(keycode >> 8, keycode & 0xFF); + return action; + } else if (keycode >= 0x2000 && keycode < 0x3000) { + // Is a shortcut for function layer, pull last 12bits + return keymap_func_to_action(keycode & 0xFFF); + } else if (keycode >= 0x3000 && keycode < 0x4000) { + action_t action; + action.code = ACTION_MACRO(keycode & 0xFF); + return action; + } else if (keycode >= BL_0 & keycode <= BL_15) { + action_t action; + action.code = ACTION_BACKLIGHT_LEVEL(keycode & 0x000F); + return action; + } else if (keycode == BL_DEC) { + action_t action; + action.code = ACTION_BACKLIGHT_DECREASE(); + return action; + } else if (keycode == BL_INC) { + action_t action; + action.code = ACTION_BACKLIGHT_INCREASE(); + return action; + } else if (keycode == BL_TOGG) { + action_t action; + action.code = ACTION_BACKLIGHT_TOGGLE(); + return action; + } else if (keycode == BL_STEP) { + action_t action; + action.code = ACTION_BACKLIGHT_STEP(); + return action; + } else if (keycode == RESET) { + bootloader_jump(); + return; + } else if (keycode > RESET) { + // MIDI + return; + } + + switch (keycode) { + case KC_FN0 ... KC_FN31: + return keymap_fn_to_action(keycode); +#ifdef BOOTMAGIC_ENABLE + case KC_CAPSLOCK: + case KC_LOCKING_CAPS: + if (keymap_config.swap_control_capslock || keymap_config.capslock_to_control) { + return keycode_to_action(KC_LCTL); + } + return keycode_to_action(keycode); + case KC_LCTL: + if (keymap_config.swap_control_capslock) { + return keycode_to_action(KC_CAPSLOCK); + } + return keycode_to_action(KC_LCTL); + case KC_LALT: + if (keymap_config.swap_lalt_lgui) { + if (keymap_config.no_gui) { + return keycode_to_action(ACTION_NO); + } + return keycode_to_action(KC_LGUI); + } + return keycode_to_action(KC_LALT); + case KC_LGUI: + if (keymap_config.swap_lalt_lgui) { + return keycode_to_action(KC_LALT); + } + if (keymap_config.no_gui) { + return keycode_to_action(ACTION_NO); + } + return keycode_to_action(KC_LGUI); + case KC_RALT: + if (keymap_config.swap_ralt_rgui) { + if (keymap_config.no_gui) { + return keycode_to_action(ACTION_NO); + } + return keycode_to_action(KC_RGUI); + } + return keycode_to_action(KC_RALT); + case KC_RGUI: + if (keymap_config.swap_ralt_rgui) { + return keycode_to_action(KC_RALT); + } + if (keymap_config.no_gui) { + return keycode_to_action(ACTION_NO); + } + return keycode_to_action(KC_RGUI); + case KC_GRAVE: + if (keymap_config.swap_grave_esc) { + return keycode_to_action(KC_ESC); + } + return keycode_to_action(KC_GRAVE); + case KC_ESC: + if (keymap_config.swap_grave_esc) { + return keycode_to_action(KC_GRAVE); + } + return keycode_to_action(KC_ESC); + case KC_BSLASH: + if (keymap_config.swap_backslash_backspace) { + return keycode_to_action(KC_BSPACE); + } + return keycode_to_action(KC_BSLASH); + case KC_BSPACE: + if (keymap_config.swap_backslash_backspace) { + return keycode_to_action(KC_BSLASH); + } + return keycode_to_action(KC_BSPACE); +#endif + default: + return keycode_to_action(keycode); + } +} + + +/* Macro */ +__attribute__ ((weak)) +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + return MACRO_NONE; +} + +/* Function */ +__attribute__ ((weak)) +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) +{ +} + +/* translates keycode to action */ +static action_t keycode_to_action(uint16_t keycode) +{ + action_t action; + switch (keycode) { + case KC_A ... KC_EXSEL: + case KC_LCTRL ... KC_RGUI: + action.code = ACTION_KEY(keycode); + break; + case KC_SYSTEM_POWER ... KC_SYSTEM_WAKE: + action.code = ACTION_USAGE_SYSTEM(KEYCODE2SYSTEM(keycode)); + break; + case KC_AUDIO_MUTE ... KC_WWW_FAVORITES: + action.code = ACTION_USAGE_CONSUMER(KEYCODE2CONSUMER(keycode)); + break; + case KC_MS_UP ... KC_MS_ACCEL2: + action.code = ACTION_MOUSEKEY(keycode); + break; + case KC_TRNS: + action.code = ACTION_TRANSPARENT; + break; + default: + action.code = ACTION_NO; + break; + } + return action; +} + + +/* translates key to keycode */ +uint16_t keymap_key_to_keycode(uint8_t layer, keypos_t key) +{ + // Read entire word (16bits) + return pgm_read_word(&keymaps[(layer)][(key.row)][(key.col)]); +} + +/* translates Fn keycode to action */ +action_t keymap_fn_to_action(uint16_t keycode) +{ + return (action_t){ .code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]) }; +} + +action_t keymap_func_to_action(uint16_t keycode) +{ + // For FUNC without 8bit limit + return (action_t){ .code = pgm_read_word(&fn_actions[(int)keycode]) }; +} diff --git a/keyboard/preonic/extended_keymap_common.h b/keyboard/preonic/extended_keymap_common.h new file mode 100644 index 000000000..e6a7dac5b --- /dev/null +++ b/keyboard/preonic/extended_keymap_common.h @@ -0,0 +1,180 @@ +/* +Copyright 2012,2013 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef KEYMAP_H +#define KEYMAP_H + +#include +#include +#include "action.h" +#include +#include "keycode.h" +#include "keymap.h" +#include "action_macro.h" +#include "report.h" +#include "host.h" +// #include "print.h" +#include "debug.h" + +#ifdef BOOTMAGIC_ENABLE +/* NOTE: Not portable. Bit field order depends on implementation */ +typedef union { + uint16_t raw; + struct { + bool swap_control_capslock:1; + bool capslock_to_control:1; + bool swap_lalt_lgui:1; + bool swap_ralt_rgui:1; + bool no_gui:1; + bool swap_grave_esc:1; + bool swap_backslash_backspace:1; + bool nkro:1; + }; +} keymap_config_t; +keymap_config_t keymap_config; +#endif + + +/* translates key to keycode */ +uint16_t keymap_key_to_keycode(uint8_t layer, keypos_t key); + +/* translates Fn keycode to action */ +action_t keymap_fn_to_action(uint16_t keycode); + +/* translates Fn keycode to action */ +action_t keymap_func_to_action(uint16_t keycode); + +extern const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS]; +extern const uint16_t fn_actions[]; + +// Ability to use mods in layouts +#define LCTL(kc) kc | 0x0100 +#define LSFT(kc) kc | 0x0200 +#define LALT(kc) kc | 0x0400 +#define LGUI(kc) kc | 0x0800 +#define RCTL(kc) kc | 0x1100 +#define RSFT(kc) kc | 0x1200 +#define RALT(kc) kc | 0x1400 +#define RGUI(kc) kc | 0x1800 + +// Alias for function layers than expand past FN31 +#define FUNC(kc) kc | 0x2000 + +// Aliases +#define S(kc) LSFT(kc) +#define F(kc) FUNC(kc) + +// For software implementation of colemak +#define CM_Q KC_Q +#define CM_W KC_W +#define CM_F KC_E +#define CM_P KC_R +#define CM_G KC_T +#define CM_J KC_Y +#define CM_L KC_U +#define CM_U KC_I +#define CM_Y KC_O +#define CM_SCLN KC_P + +#define CM_A KC_A +#define CM_R KC_S +#define CM_S KC_D +#define CM_T KC_F +#define CM_D KC_G +#define CM_H KC_H +#define CM_N KC_J +#define CM_E KC_K +#define CM_I KC_L +#define CM_O KC_SCLN + +#define CM_Z KC_Z +#define CM_X KC_X +#define CM_C KC_C +#define CM_V KC_V +#define CM_B KC_B +#define CM_K KC_N +#define CM_M KC_M +#define CM_COMM KC_COMM +#define CM_DOT KC_DOT +#define CM_SLSH KC_SLSH + +// Make it easy to support these in macros +#define KC_CM_Q CM_Q +#define KC_CM_W CM_W +#define KC_CM_F CM_F +#define KC_CM_P CM_P +#define KC_CM_G CM_G +#define KC_CM_J CM_J +#define KC_CM_L CM_L +#define KC_CM_U CM_U +#define KC_CM_Y CM_Y +#define KC_CM_SCLN CM_SCLN + +#define KC_CM_A CM_A +#define KC_CM_R CM_R +#define KC_CM_S CM_S +#define KC_CM_T CM_T +#define KC_CM_D CM_D +#define KC_CM_H CM_H +#define KC_CM_N CM_N +#define KC_CM_E CM_E +#define KC_CM_I CM_I +#define KC_CM_O CM_O + +#define KC_CM_Z CM_Z +#define KC_CM_X CM_X +#define KC_CM_C CM_C +#define KC_CM_V CM_V +#define KC_CM_B CM_B +#define KC_CM_K CM_K +#define KC_CM_M CM_M +#define KC_CM_COMM CM_COMM +#define KC_CM_DOT CM_DOT +#define KC_CM_SLSH CM_SLSH + +#define M(kc) kc | 0x3000 + +#define MACRODOWN(...) (record->event.pressed ? MACRO(__VA_ARGS__) : MACRO_NONE) + +#define BL_ON 0x4009 +#define BL_OFF 0x4000 +#define BL_0 0x4000 +#define BL_1 0x4001 +#define BL_2 0x4002 +#define BL_3 0x4003 +#define BL_4 0x4004 +#define BL_5 0x4005 +#define BL_6 0x4006 +#define BL_7 0x4007 +#define BL_8 0x4008 +#define BL_9 0x4009 +#define BL_10 0x400A +#define BL_11 0x400B +#define BL_12 0x400C +#define BL_13 0x400D +#define BL_14 0x400E +#define BL_15 0x400F +#define BL_DEC 0x4010 +#define BL_INC 0x4011 +#define BL_TOGG 0x4012 +#define BL_STEP 0x4013 + +#define RESET 0x5000 + +#define MIDI(n) n | 0x6000 + +#endif diff --git a/keyboard/preonic/extended_keymaps/extended_keymap_default.c b/keyboard/preonic/extended_keymaps/extended_keymap_default.c new file mode 100644 index 000000000..c75144bf4 --- /dev/null +++ b/keyboard/preonic/extended_keymaps/extended_keymap_default.c @@ -0,0 +1,65 @@ +#include "extended_keymap_common.h" +#include "backlight.h" +#include "lufa.h" +#include "debug.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = { /* Qwerty */ + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT}, + {M(0), KC_LCTL, KC_LALT, KC_LGUI, FUNC(2), KC_SPC, KC_SPC, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} + // Space is repeated to accommadate for both spacebar wiring positions +}, +[1] = { /* Colemak */ + {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC}, + {KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT}, + {KC_FN3, KC_LCTL, KC_LALT, KC_LGUI, FUNC(2), KC_SPC, KC_SPC, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, +[2] = { /* RAISE */ + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_TRNS, FUNC(3), FUNC(4), RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, + {KC_TRNS, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(1), KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, +[3] = { /* LOWER */ + {S(KC_GRV), S(KC_1), S(KC_2), S(KC_3), S(KC_4), S(KC_5), S(KC_6), S(KC_7), S(KC_8), S(KC_9), S(KC_0), KC_BSPC}, + {KC_TRNS, FUNC(3), FUNC(4), RESET, KC_TRNS, KC_TRNS, KC_TRNS, S(KC_MINS), S(KC_EQL), S(KC_LBRC), S(KC_RBRC), S(KC_BSLS)}, + {KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, +[4] = { /* TENKEY */ + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_KP_7, KC_KP_8, KC_KP_9, KC_P, KC_BSPC}, + {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_KP_4, KC_KP_5, KC_KP_6, KC_SCLN, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_KP_1, KC_KP_2, KC_KP_3, KC_SLSH, KC_ENT}, + {KC_TRNS, KC_LCTL, KC_LALT, KC_LGUI, KC_TRNS, KC_SPC, KC_SPC, KC_KP_0, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +} +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_MOMENTARY(2), // to RAISE + [2] = ACTION_LAYER_MOMENTARY(3), // to LOWER + + [3] = ACTION_DEFAULT_LAYER_SET(0), + [4] = ACTION_DEFAULT_LAYER_SET(1), + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + midi_send_noteon(&midi_device, 1, 64, 127); + backlight_step(); + } else { + unregister_code(KC_RSFT); + midi_send_noteoff(&midi_device, 1, 64, 127); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboard/preonic/extended_keymaps/extended_keymap_lock.c b/keyboard/preonic/extended_keymaps/extended_keymap_lock.c new file mode 100644 index 000000000..c35ca8a10 --- /dev/null +++ b/keyboard/preonic/extended_keymaps/extended_keymap_lock.c @@ -0,0 +1,73 @@ +#include "extended_keymap_common.h" +#include "backlight.h" +#include "action_layer.h" +#include "lufa.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = { /* Qwerty */ + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL}, + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT}, + {M(0), KC_LCTL, KC_LALT, KC_LGUI, FUNC(2), KC_SPC, KC_SPC, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} + // Space is repeated to accommadate for both spacebar wiring positions +}, +[1] = { /* Colemak */ + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL}, + {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC}, + {KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT}, + {KC_FN3, KC_LCTL, KC_LALT, KC_LGUI, FUNC(2), KC_SPC, KC_SPC, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, +[2] = { /* RAISE */ + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL}, + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_TRNS, FUNC(3), FUNC(4), RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, + {KC_TRNS, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(1), KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, +[3] = { /* LOWER */ + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL}, + {S(KC_GRV), S(KC_1), S(KC_2), S(KC_3), S(KC_4), S(KC_5), S(KC_6), S(KC_7), S(KC_8), S(KC_9), S(KC_0), KC_BSPC}, + {KC_TRNS, FUNC(3), FUNC(4), RESET, KC_TRNS, KC_TRNS, KC_TRNS, S(KC_MINS), S(KC_EQL), S(KC_LBRC), S(KC_RBRC), S(KC_BSLS)}, + {KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, +[4] = { /* TENKEY */ + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL}, + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_KP_7, KC_KP_8, KC_KP_9, KC_P, KC_BSPC}, + {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_KP_4, KC_KP_5, KC_KP_6, KC_SCLN, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_KP_1, KC_KP_2, KC_KP_3, KC_SLSH, KC_ENT}, + {KC_TRNS, KC_LCTL, KC_LALT, KC_LGUI, KC_TRNS, KC_SPC, KC_SPC, KC_KP_0, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +} +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_MOMENTARY(2), // to RAISE + [2] = ACTION_LAYER_MOMENTARY(3), // to LOWER + + [3] = ACTION_DEFAULT_LAYER_SET(0), + [4] = ACTION_DEFAULT_LAYER_SET(1), + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + // register_code(KC_RSFT); + backlight_set(BACKLIGHT_LEVELS); + midi_send_noteon(&midi_device, 1, 64, 127); + layer_on(4); + } else { + // unregister_code(KC_RSFT); + backlight_set(0); + midi_send_noteoff(&midi_device, 1, 64, 127); + layer_clear(); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboard/preonic/led.c b/keyboard/preonic/led.c new file mode 100644 index 000000000..2c0574660 --- /dev/null +++ b/keyboard/preonic/led.c @@ -0,0 +1,38 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include +#include "stdint.h" +#include "led.h" + + +void led_set(uint8_t usb_led) +{ + // // Using PE6 Caps Lock LED + // if (usb_led & (1<. +*/ + +/* + * scan matrix + */ +#include +#include +#include +#include +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" + +#ifndef DEBOUNCE +# define DEBOUNCE 10 +#endif +static uint8_t debouncing = DEBOUNCE; + +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; + +static matrix_row_t read_cols(void); +static void init_cols(void); +static void unselect_rows(void); +static void select_row(uint8_t row); + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + +void matrix_init(void) +{ + // To use PORTF disable JTAG with writing JTD bit twice within four cycles. + MCUCR |= (1<