+++ /dev/null
-/* Copyright 2018 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#pragma once
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID 0x5241 // "RW"
-#define PRODUCT_ID 0x006B // 6-B
-#define DEVICE_VER 0x0001
-#define MANUFACTURER RAMA.WORKS
-#define PRODUCT RAMA M6-B
-#define DESCRIPTION RAMA M6-B Macropad
-
-/* key matrix size */
-#define MATRIX_ROWS 1
-#define MATRIX_COLS 6
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { E6 }
-#define MATRIX_COL_PINS { D4, B5, F4, D7, C6, F6 }
-#define UNUSED_PINS
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-#define RGB_BACKLIGHT_ENABLED 1
-
-// This conditionally compiles the backlight code for M6-B specifics
-#define RGB_BACKLIGHT_M6_B
-
-// enable/disable LEDs based on layout
-#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0
-#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0
-#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0
-#define RGB_BACKLIGHT_USE_7U_SPACEBAR 0
-#define RGB_BACKLIGHT_USE_ISO_ENTER 0
-#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0
-
-// disable backlight when USB suspended (PC sleep/hibernate/shutdown)
-#define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0
-
-// disable backlight after timeout in minutes, 0 = no timeout
-#define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0
-
-// the default brightness
-#define RGB_BACKLIGHT_BRIGHTNESS 255
-
-// the default effect (RGB test)
-#define RGB_BACKLIGHT_EFFECT 255
-
-// the default effect speed (0-3)
-#define RGB_BACKLIGHT_EFFECT_SPEED 0
-
-// the default color1 and color2
-#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 }
-#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 }
-
-// These define which keys in the matrix are alphas/mods
-// Used for backlight effects so colors are different for
-// alphas vs. mods
-// Each value is for a row, bit 0 is column 0
-// Alpha=0 Mod=1
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0
-
-#define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
-#define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
-#define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
-#define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
-
-#define DYNAMIC_KEYMAP_LAYER_COUNT 4
-
-// EEPROM usage
-
-// TODO: refactor with new user EEPROM code (coming soon)
-#define EEPROM_MAGIC 0x451F
-#define EEPROM_MAGIC_ADDR 32
-// Bump this every time we change what we store
-// This will automatically reset the EEPROM with defaults
-// and avoid loading invalid data from the EEPROM
-#define EEPROM_VERSION 0x08
-#define EEPROM_VERSION_ADDR 34
-
-// Backlight config starts after EEPROM version
-#define RGB_BACKLIGHT_CONFIG_EEPROM_ADDR 35
-// Dynamic keymap starts after backlight config (35+43)
-#define DYNAMIC_KEYMAP_EEPROM_ADDR 78
-// Dynamic macro starts after dynamic keymaps (78+(4*6*2)) = (78+48)
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 126
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 898
-#define DYNAMIC_KEYMAP_MACRO_COUNT 16
projects / qmk_firmware.git / blobdiff