// buffers and the transfers in IS31FL3731_write_pwm_buffer() but it's
// probably not worth the extra complexity.
uint8_t g_pwm_buffer[DRIVER_COUNT][144];
-bool g_pwm_buffer_update_required = false;
+bool g_pwm_buffer_update_required[DRIVER_COUNT] = { false };
uint8_t g_led_control_registers[DRIVER_COUNT][18] = { { 0 }, { 0 } };
-bool g_led_control_registers_update_required = false;
+bool g_led_control_registers_update_required[DRIVER_COUNT] = { false };
// This is the bit pattern in the LED control registers
// (for matrix A, add one to register for matrix B)
g_pwm_buffer[led.driver][led.r - 0x24] = red;
g_pwm_buffer[led.driver][led.g - 0x24] = green;
g_pwm_buffer[led.driver][led.b - 0x24] = blue;
- g_pwm_buffer_update_required = true;
+ g_pwm_buffer_update_required[led.driver] = true;
}
}
{
is31_led led = g_is31_leds[index];
- uint8_t control_register_r = (led.r - 0x24) / 8;
- uint8_t control_register_g = (led.g - 0x24) / 8;
- uint8_t control_register_b = (led.b - 0x24) / 8;
- uint8_t bit_r = (led.r - 0x24) % 8;
- uint8_t bit_g = (led.g - 0x24) % 8;
- uint8_t bit_b = (led.b - 0x24) % 8;
+ uint8_t control_register_r = (led.r - 0x24) / 8;
+ uint8_t control_register_g = (led.g - 0x24) / 8;
+ uint8_t control_register_b = (led.b - 0x24) / 8;
+ uint8_t bit_r = (led.r - 0x24) % 8;
+ uint8_t bit_g = (led.g - 0x24) % 8;
+ uint8_t bit_b = (led.b - 0x24) % 8;
if ( red ) {
g_led_control_registers[led.driver][control_register_r] |= (1 << bit_r);
g_led_control_registers[led.driver][control_register_b] &= ~(1 << bit_b);
}
- g_led_control_registers_update_required = true;
+ g_led_control_registers_update_required[led.driver] = true;
}
-void IS31FL3731_update_pwm_buffers( uint8_t addr1, uint8_t addr2 )
+void IS31FL3731_update_pwm_buffers( uint8_t addr, uint8_t index )
{
- if ( g_pwm_buffer_update_required )
+ if ( g_pwm_buffer_update_required[index] )
{
- IS31FL3731_write_pwm_buffer( addr1, g_pwm_buffer[0] );
- IS31FL3731_write_pwm_buffer( addr2, g_pwm_buffer[1] );
+ IS31FL3731_write_pwm_buffer( addr, g_pwm_buffer[index] );
}
- g_pwm_buffer_update_required = false;
+ g_pwm_buffer_update_required[index] = false;
}
-void IS31FL3731_update_led_control_registers( uint8_t addr1, uint8_t addr2 )
+void IS31FL3731_update_led_control_registers( uint8_t addr, uint8_t index )
{
- if ( g_led_control_registers_update_required )
+ if ( g_led_control_registers_update_required[index] )
{
for ( int i=0; i<18; i++ )
{
- IS31FL3731_write_register(addr1, i, g_led_control_registers[0][i] );
- IS31FL3731_write_register(addr2, i, g_led_control_registers[1][i] );
+ IS31FL3731_write_register( addr, i, g_led_control_registers[index][i] );
}
}
}
// (eg. from a timer interrupt).
// Call this while idle (in between matrix scans).
// If the buffer is dirty, it will update the driver with the buffer.
-void IS31FL3731_update_pwm_buffers( uint8_t addr1, uint8_t addr2 );
-void IS31FL3731_update_led_control_registers( uint8_t addr1, uint8_t addr2 );
+void IS31FL3731_update_pwm_buffers( uint8_t addr, uint8_t index );
+void IS31FL3731_update_led_control_registers( uint8_t addr, uint8_t index );
#define C1_1 0x24
#define C1_2 0x25
#include "tmk_core/common/eeprom.h"
// HACK
-#include "keyboards/zeal60/zeal60_api.h" // Temporary hack
-#include "keyboards/zeal60/zeal60_keycodes.h" // Temporary hack
+#include "keyboards/wilba_tech/via_api.h" // Temporary hack
+#include "keyboards/wilba_tech/via_keycodes.h" // Temporary hack
/* Artificial delay added to get media keys to work in the encoder*/
void eeprom_reset(void)
{
- // Set the Zeal60 specific EEPROM state as invalid.
+ // Set the VIA specific EEPROM state as invalid.
eeprom_set_valid(false);
// Set the TMK/QMK EEPROM state as invalid.
eeconfig_disable();
#include "tmk_core/common/eeprom.h"
// HACK
-#include "keyboards/zeal60/zeal60_api.h" // Temporary hack
-#include "keyboards/zeal60/zeal60_keycodes.h" // Temporary hack
+#include "keyboards/wilba_tech/via_api.h" // Temporary hack
+#include "keyboards/wilba_tech/via_keycodes.h" // Temporary hack
backlight_config_t kb_backlight_config = {
# project specific files
-SRC = keyboards/zeal60/zeal60.c \
- keyboards/zeal60/rgb_backlight.c \
+SRC = keyboards/wilba_tech/wt_main.c \
+ keyboards/wilba_tech/wt_rgb_backlight.c \
drivers/issi/is31fl3733.c \
quantum/color.c \
drivers/arm/i2c_master.c
# project specific files
-SRC = keyboards/zeal60/zeal60.c \
- keyboards/zeal60/rgb_backlight.c \
+SRC = keyboards/wilba_tech/wt_main.c \
+ keyboards/wilba_tech/wt_rgb_backlight.c \
drivers/issi/is31fl3733.c \
quantum/color.c \
drivers/arm/i2c_master.c
# project specific files
-SRC = keyboards/zeal60/zeal60.c \
- keyboards/zeal60/rgb_backlight.c \
+SRC = keyboards/wilba_tech/wt_main.c \
+ keyboards/wilba_tech/wt_rgb_backlight.c \
drivers/issi/is31fl3733.c \
quantum/color.c \
drivers/arm/i2c_master.c
# project specific files
-SRC = keyboards/zeal60/zeal60.c \
- keyboards/zeal60/rgb_backlight.c \
+SRC = keyboards/wilba_tech/wt_main.c \
+ keyboards/wilba_tech/wt_rgb_backlight.c \
drivers/issi/is31fl3733.c \
quantum/color.c \
drivers/arm/i2c_master.c
# project specific files
-SRC = keyboards/zeal60/zeal60.c \
- keyboards/zeal60/rgb_backlight.c \
+SRC = keyboards/wilba_tech/wt_main.c \
+ keyboards/wilba_tech/wt_rgb_backlight.c \
drivers/issi/is31fl3733.c \
quantum/color.c \
drivers/arm/i2c_master.c
# project specific files
-SRC = keyboards/zeal60/zeal60.c \
- keyboards/zeal60/rgb_backlight.c \
+SRC = keyboards/wilba_tech/wt_main.c \
+ keyboards/wilba_tech/wt_rgb_backlight.c \
drivers/issi/is31fl3733.c \
quantum/color.c \
drivers/arm/i2c_master.c
# project specific files
-SRC = keyboards/zeal60/zeal60.c \
- keyboards/zeal60/rgb_backlight.c \
+SRC = keyboards/wilba_tech/wt_main.c \
+ keyboards/wilba_tech/wt_rgb_backlight.c \
drivers/issi/is31fl3733.c \
quantum/color.c \
drivers/arm/i2c_master.c
# project specific files
-SRC = keyboards/zeal60/zeal60.c \
- keyboards/zeal60/rgb_backlight.c \
+SRC = keyboards/wilba_tech/wt_main.c \
+ keyboards/wilba_tech/wt_rgb_backlight.c \
drivers/issi/is31fl3733.c \
quantum/color.c \
drivers/arm/i2c_master.c
#define XXX KC_NO
#include "quantum.h"
-#include "../../zeal60/rgb_backlight_keycodes.h"
-#include "../../zeal60/zeal60_keycodes.h"
+#include "../../wilba_tech/wt_rgb_backlight_keycodes.h"
+#include "../../wilba_tech/via_keycodes.h"
// This a shortcut to help you visually see your layout.
#endif
#include "quantum.h"
-#include "../../zeal60/zeal60_keycodes.h"
+#include "../../wilba_tech/via_keycodes.h"
// Used to create a keymap using only KC_ prefixed keys
#define LAYOUT_kc( \
# project specific files
-SRC = keyboards/zeal60/zeal60.c \
- keyboards/zeal60/rgb_backlight.c \
+SRC = keyboards/wilba_tech/wt_main.c \
+ keyboards/wilba_tech/wt_rgb_backlight.c \
drivers/issi/is31fl3733.c \
quantum/color.c \
drivers/arm/i2c_master.c
#define XXX KC_NO
#include "quantum.h"
-#include "../zeal60/rgb_backlight_keycodes.h"
-#include "../zeal60/zeal60_keycodes.h"
+#include "../wilba_tech/wt_rgb_backlight_keycodes.h"
+#include "../wilba_tech/via_keycodes.h"
// This a shortcut to help you visually see your layout.
# project specific files
-SRC = keyboards/zeal60/zeal60.c \
- keyboards/zeal60/rgb_backlight.c \
+SRC = keyboards/wilba_tech/wt_main.c \
+ keyboards/wilba_tech/wt_rgb_backlight.c \
drivers/issi/is31fl3733.c \
quantum/color.c \
drivers/arm/i2c_master.c
+++ /dev/null
-/* Copyright 2017 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#pragma once
-
-#include "config_common.h"
-
-// USB Device descriptor parameter
-#define VENDOR_ID 0x5241 // "RW"
-#define PRODUCT_ID 0x4B59 // "KY"
-#define DEVICE_VER 0x0001
-#define MANUFACTURER RAMA.WORKS
-#define PRODUCT RAMA KOYU
-#define DESCRIPTION RAMA KOYU Keyboard
-
-
-
-// key matrix size
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 15
-
-// KOYU PCB pin-out
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 }
-#define UNUSED_PINS
-
-// IS31FL3731 driver
-#define DRIVER_COUNT 2
-#define DRIVER_LED_TOTAL 72
-
-// COL2ROW or ROW2COL
-#define DIODE_DIRECTION COL2ROW
-
-// Set 0 if debouncing isn't needed
-#define DEBOUNCE 5
-
-// Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap
-#define LOCKING_SUPPORT_ENABLE
-// Locking resynchronize hack
-#define LOCKING_RESYNC_ENABLE
-
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-// disable debug print
-//#define NO_DEBUG
-
-// disable print
-//#define NO_PRINT
-
-// disable action features
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-#define RGB_BACKLIGHT_ENABLED 1
-
-// This conditionally compiles the backlight code for KOYU specifics
-#define RGB_BACKLIGHT_KOYU
-
-// enable/disable LEDs based on layout
-// they aren't really used if RGB_BACKLIGHT_M60_A defined
-#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 1
-#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0
-#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 1
-#define RGB_BACKLIGHT_USE_7U_SPACEBAR 1
-#define RGB_BACKLIGHT_USE_ISO_ENTER 0
-#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 1
-
-// disable backlight when USB suspended (PC sleep/hibernate/shutdown)
-#define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0
-
-// disable backlight after timeout in minutes, 0 = no timeout
-#define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0
-
-// the default brightness
-#define RGB_BACKLIGHT_BRIGHTNESS 255
-
-// the default effect (RGB test)
-#define RGB_BACKLIGHT_EFFECT 255
-
-// the default effect speed (0-3)
-#define RGB_BACKLIGHT_EFFECT_SPEED 0
-
-// the default color1 and color2
-#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 }
-#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 }
-
-// These define which keys in the matrix are alphas/mods
-// Used for backlight effects so colors are different for
-// alphas vs. mods
-// Each value is for a row, bit 0 is column 0
-// Alpha=0 Mod=1
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0b0110000000000001
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0b0110000000000001
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0b0111000000000001
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0111000000000001
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0111100000000111
-
-#define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
-#define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
-#define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
-#define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
-
-#define DYNAMIC_KEYMAP_LAYER_COUNT 4
-
-// EEPROM usage
-
-// TODO: refactor with new user EEPROM code (coming soon)
-#define EEPROM_MAGIC 0x451F
-#define EEPROM_MAGIC_ADDR 32
-// Bump this every time we change what we store
-// This will automatically reset the EEPROM with defaults
-// and avoid loading invalid data from the EEPROM
-#define EEPROM_VERSION 0x08
-#define EEPROM_VERSION_ADDR 34
-
-// Backlight config starts after EEPROM version
-#define RGB_BACKLIGHT_CONFIG_EEPROM_ADDR 35
-// Dynamic keymap starts after backlight config (35+31)
-#define DYNAMIC_KEYMAP_EEPROM_ADDR 66
-// Dynamic macro starts after dynamic keymaps (66+(4*5*15*2)) = (66+600)
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 666
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 358
-#define DYNAMIC_KEYMAP_MACRO_COUNT 16
+++ /dev/null
-{
- "keyboard_name": "KOYU",
- "url": "",
- "maintainer": "Wilba",
- "bootloader": "DFU",
- "width": 16,
- "height": 5,
- "layouts": {
- "LAYOUT_all": {
- "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"PrtSc", "x":13, "y":0}, {"label":"Pause", "x":14, "y":0}, {"label":"Num Lock", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Insert", "x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Home", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"\u2191", "x":14, "y":3}, {"label":"/", "x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Ctrl", "x":11, "y":4, "w":1.5}, {"label":"\u2190", "x":13, "y":4}, {"label":"\u2193", "x":14, "y":4}, {"label":"\u2192", "x":15, "y":4}]
- }
- }
-}
\ No newline at end of file
+++ /dev/null
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
- // Default layer
- [0] = LAYOUT_all(
- KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_DEL, KC_HOME,
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_PGUP,
- KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN,
- KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END,
- MO(1), KC_LGUI, KC_LALT, KC_SPC, MO(2), KC_LEFT, KC_DOWN, KC_RGHT),
-
- // Fn1 Layer
- [1] = LAYOUT_all(
- KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, KC_TRNS,
- KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_EJCT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
- // Fn2 Layer
- [2] = LAYOUT_all(
- KC_TRNS, EF_DEC, EF_INC, H1_DEC, H1_INC, H2_DEC, H2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BR_DEC, BR_INC, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, S1_DEC, S1_INC, S2_DEC, S2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, ES_DEC, ES_INC, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
- // Fn3 Layer
- [3] = LAYOUT_all(
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-};
+++ /dev/null
-/* Copyright 2018 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#ifndef RGB_BACKLIGHT_KOYU
-#error RGB_BACKLIGHT_KOYU not defined, you done goofed somehao, brah
-#endif
+++ /dev/null
-/* Copyright 2018 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#include "quantum.h"
-#include "../../zeal60/rgb_backlight_keycodes.h"
-#include "../../zeal60/zeal60_keycodes.h"
-
-#define ____ KC_NO
-
-// Right switch of split backspace is at 2,13 and is the only switch
-// whose physical position doesn't match switch matrix position :-(
-// However, it also makes no sense to view the physical as 16 columns,
-// so the numbering goes 00 to 14. Deal with it.
-
-#define LAYOUT_all( \
- K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K213, K014, \
- K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
- K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K214, \
- K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, \
- K400, K401, K402, K407, K411, K412, K413, K414 \
-) { \
- { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \
- { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \
- { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214 }, \
- { K300, ____, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314 }, \
- { K400, K401, K402, ____, ____, ____, ____, K407, ____, ____, ____, K411, K412, K413, K414 } \
-}
+++ /dev/null
-# RAMA KOYU
-
-
-
-The 'wait' for something isn't the most conscious desire, but that anticipation creates nostalgia.
-
-At Rama Works, you've embraced this. From updates of the blog, to direct communication with the community, being part of a Rama Works product doesn't just start when you receive it. If you've ever received a Rama Works product, you know that no detail is overlooked.
-
-Let us take you on a journey that will capture that sensory experience, and explore the gravitational interaction between aesthetic and design. The Rama Works 'X' element personifies the understanding that taking something away doesn't necessarily make it less.
-
-This is the sound of Rama Works. Never too busy-a feeling of delightful modern weightlessness. A rich sonic experience. Sparse and ethereal, this music boldly inhabits a nondescript, borderless space. Warm, synthetic textures, bespoke musical sound design. percussive elements percolating and accentuating movement on the screen and in the stereo field. a sonic palette full of clicks, taps and resonances evoking a sense of calm comfort and familiarity.
-
-[More info at RAMA WORKS](https://rama.works/koyu/)
-
-Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582)
-Hardware Supported: RAMA KOYU PCB
-Hardware Availability: [RAMA WORKS Store](https://ramaworks.store/)
-
-Make example for this keyboard (after setting up your build environment):
-
- make rama/koyu:default
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file
+++ /dev/null
-
-
-# project specific files
-SRC = keyboards/zeal60/zeal60.c \
- keyboards/zeal60/rgb_backlight.c \
- quantum/color.c \
- drivers/issi/is31fl3731.c \
- drivers/avr/i2c_master.c
-
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-# Boot Section
-BOOTLOADER = atmel-dfu
-
-# Do not put the microcontroller into power saving mode
-# when we get USB suspend event. We want it to keep updating
-# backlight effects.
-OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
-
-# Build Options
-# change to "no" to disable the options, or define them in the Makefile in
-# the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = no # Console for debug(+400)
-COMMAND_ENABLE = no # Commands for debug and configuration
-NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
-MIDI_ENABLE = no # MIDI controls
-AUDIO_ENABLE = no # Audio output on port C6
-UNICODE_ENABLE = no # Unicode
-BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
-
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
-
-RAW_ENABLE = yes
-DYNAMIC_KEYMAP_ENABLE = yes
-CIE1931_CURVE = yes
-
-#LAYOUTS = ???
+++ /dev/null
-/*
-Copyright 2018 Wilba
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID 0x5241 // "RW"
-#define PRODUCT_ID 0x00AB // 10-B
-#define DEVICE_VER 0x0001
-#define MANUFACTURER RAMA.WORKS
-#define PRODUCT RAMA M10-B
-#define DESCRIPTION RAMA M10-B
-
-/* key matrix size */
-#define MATRIX_ROWS 1
-#define MATRIX_COLS 10
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { E6 }
-#define MATRIX_COL_PINS { D7, B6, F0, D6, B5, F1, D4, B4, F4, F5 }
-#define UNUSED_PINS
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
-#define BACKLIGHT_PIN C6
-//#define BACKLIGHT_BREATHING
-#define BACKLIGHT_LEVELS 3
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1 H
-//#define MAGIC_KEY_HELP2 SLASH
-//#define MAGIC_KEY_DEBUG D
-//#define MAGIC_KEY_DEBUG_MATRIX X
-//#define MAGIC_KEY_DEBUG_KBD K
-//#define MAGIC_KEY_DEBUG_MOUSE M
-//#define MAGIC_KEY_VERSION V
-//#define MAGIC_KEY_STATUS S
-//#define MAGIC_KEY_CONSOLE C
-//#define MAGIC_KEY_LAYER0_ALT1 ESC
-//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
-//#define MAGIC_KEY_LAYER0 0
-//#define MAGIC_KEY_LAYER1 1
-//#define MAGIC_KEY_LAYER2 2
-//#define MAGIC_KEY_LAYER3 3
-//#define MAGIC_KEY_LAYER4 4
-//#define MAGIC_KEY_LAYER5 5
-//#define MAGIC_KEY_LAYER6 6
-//#define MAGIC_KEY_LAYER7 7
-//#define MAGIC_KEY_LAYER8 8
-//#define MAGIC_KEY_LAYER9 9
-//#define MAGIC_KEY_BOOTLOADER PAUSE
-//#define MAGIC_KEY_LOCK CAPS
-//#define MAGIC_KEY_EEPROM E
-//#define MAGIC_KEY_NKRO N
-//#define MAGIC_KEY_SLEEP_LED Z
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-/*
- * MIDI options
- */
-
-/* Prevent use of disabled MIDI features in the keymap */
-//#define MIDI_ENABLE_STRICT 1
-
-/* enable basic MIDI features:
- - MIDI notes can be sent when in Music mode is on
-*/
-//#define MIDI_BASIC
-
-/* enable advanced MIDI features:
- - MIDI notes can be added to the keymap
- - Octave shift and transpose
- - Virtual sustain, portamento, and modulation wheel
- - etc.
-*/
-//#define MIDI_ADVANCED
-
-/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
-//#define MIDI_TONE_KEYCODE_OCTAVES 1
-
-//#define WT_MONO_BACKLIGHT
-
-#define DYNAMIC_KEYMAP_LAYER_COUNT 4
-
-// EEPROM usage
-
-// TODO: refactor with new user EEPROM code (coming soon)
-#define EEPROM_MAGIC 0x451F
-#define EEPROM_MAGIC_ADDR 32
-// Bump this every time we change what we store
-// This will automatically reset the EEPROM with defaults
-// and avoid loading invalid data from the EEPROM
-#define EEPROM_VERSION 0x08
-#define EEPROM_VERSION_ADDR 34
-
-// Dynamic keymap starts after EEPROM version
-#define DYNAMIC_KEYMAP_EEPROM_ADDR 35
-// Dynamic macro starts after dynamic keymaps (35+(4*10*2)) = (35+80)
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 115
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 909
-#define DYNAMIC_KEYMAP_MACRO_COUNT 16
-
-#endif
+++ /dev/null
-{
- "keyboard_name": "m10-b",
- "url": "",
- "maintainer": "qmk",
- "width": 3,
- "height": 4,
- "layouts": {
- "LAYOUT": {
- "layout": [
- { "x": 0, "y": 0 },
- { "x": 1, "y": 0 },
- { "x": 2, "y": 0 },
- { "x": 0, "y": 1 },
- { "x": 1, "y": 1 },
- { "x": 2, "y": 1 },
- { "x": 0, "y": 2 },
- { "x": 1, "y": 2 },
- { "x": 2, "y": 2 },
- { "x": 1, "y": 3, "w": 2.0 }
- ]
- }
- }
-}
+++ /dev/null
-/* Copyright 2018 Wilba
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-// place overrides here
+++ /dev/null
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
- LAYOUT(
- KC_KP_7, KC_KP_8, KC_KP_9, KC_KP_4, KC_KP_5, KC_KP_6, KC_KP_1, KC_KP_2, KC_KP_3, KC_KP_0 )
-
-};
+++ /dev/null
-
-
-# Default RAMA M10-B Layout
-
-This is an example layout.
-
-
+++ /dev/null
-/* Copyright 2018 Wilba
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
-
-#undef RAW_ENABLE
-#undef DYNAMIC_KEYMAP_ENABLE
-
-#endif
+++ /dev/null
-#include QMK_KEYBOARD_H
-
-/*KNOPS_MISC*/
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
- /*KNOPS_LAYOUT*/
-
-};
-
-// M10-B LEDs are all in parallel and controlled by the QMK backlight
-// functionality. LED functions here are for possible future use
-// as layer indicators, etc. and not implemented yet.
-//
-// To implement LED functions here, QMK backlight functionality
-// will need to be disabled either via rules.mk or config.h
-// or overriding the backlight functions to do nothing.
-//
-// LEDs are driven by a transistor connected to pin C6.
-//
-
-void set_led_state(int ledId, bool state)
-{
-}
-
-void led_init_ports()
-{
-}
-
-void led_set_layer(int layer)
-{
- led_init_ports();
-
- led_set_layer(0);
-
- /*KNOPS_SIMPLELED_STATES*/
-}
-
-void matrix_init_user(void)
-{
- /*KNOPS_INIT*/
-}
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
- /*KNOPS_MACRO*/
- return NULL;
-}
-
-void matrix_scan_user(void)
-{
- /*KNOPS_SCAN*/
-}
-
-void led_set_user(uint8_t usb_led)
-{
- /*KNOPS_FUNCTIONALLED_STATES*/
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record)
-{
- /*KNOPS_PROCESS_STATE*/
- return NULL;
-}
+++ /dev/null
-
-
-# Default RAMA M10-B Layout
-
-This is an example layout.
-
-
+++ /dev/null
-/* Copyright 2018 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-// Nothing to see here, move along... ;-)
+++ /dev/null
-/* Copyright 2018 Wilba
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#include "quantum.h"
-
-#ifndef RAMA_M10_B_H
-#define RAMA_M10_B_H
-
-// This a shortcut to help you visually see your layout.
-// The first section contains all of the arguments
-// The second converts the arguments into a two-dimensional array
-#define LAYOUT( \
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09 ) \
- { \
- {K00, K01, K02, K03, K04, K05, K06, K07, K08, K09}, \
- }
-#endif // RAMA_M10_B
+++ /dev/null
-# RAMA M10-B
-
-
-
-Mechanical Mini Pad. [More info at Massdrop](https://www.massdrop.com/buy/rama-m10-a)
-
-Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582)
-Hardware Supported: RAMA M10-B PCB
-Hardware Availability: [Massdrop](https://www.massdrop.com/buy/rama-m10-a)
-
-Make example for this keyboard (after setting up your build environment):
-
- make rama/m10_b:default
-
-See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
\ No newline at end of file
+++ /dev/null
-# project specific files
-SRC = keyboards/wilba_tech/wt_main.c
-
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section
-BOOTLOADER = atmel-dfu
-
-
-# Build Options
-# change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = no # Console for debug(+400)
-COMMAND_ENABLE = no # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = yes # USB Nkey Rollover
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
-UNICODE_ENABLE = no # Unicode
-BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no # Audio output on port C6
-FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-
-RAW_ENABLE = yes
-DYNAMIC_KEYMAP_ENABLE = yes
+++ /dev/null
-/* Copyright 2017 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#pragma once
-
-#include "config_common.h"
-
-// USB Device descriptor parameter
-#define VENDOR_ID 0x5241 // "RW"
-#define PRODUCT_ID 0x060A // 60-A
-#define DEVICE_VER 0x0001
-#define MANUFACTURER RAMA.WORKS
-#define PRODUCT RAMA M60-A
-#define DESCRIPTION RAMA M60-A Keyboard
-
-// key matrix size
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 14
-
-// M60-A PCB default pin-out
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 }
-#define UNUSED_PINS
-
-// IS31FL3731 driver
-#define DRIVER_COUNT 2
-#define DRIVER_LED_TOTAL 72
-
-// COL2ROW or ROW2COL
-#define DIODE_DIRECTION COL2ROW
-
-// Set 0 if debouncing isn't needed
-#define DEBOUNCE 5
-
-// Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap
-#define LOCKING_SUPPORT_ENABLE
-// Locking resynchronize hack
-#define LOCKING_RESYNC_ENABLE
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-// disable debug print
-//#define NO_DEBUG
-
-// disable print
-//#define NO_PRINT
-
-// disable action features
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-#define RGB_BACKLIGHT_ENABLED 1
-
-// This conditionally compiles the backlight code for M60-A specifics
-#define RGB_BACKLIGHT_M60_A
-
-// enable/disable LEDs based on layout
-// they aren't really used if RGB_BACKLIGHT_M60_A defined
-#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 1
-#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0
-#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 1
-#define RGB_BACKLIGHT_USE_7U_SPACEBAR 1
-#define RGB_BACKLIGHT_USE_ISO_ENTER 0
-#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 1
-
-// disable backlight when USB suspended (PC sleep/hibernate/shutdown)
-#define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0
-
-// disable backlight after timeout in minutes, 0 = no timeout
-#define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0
-
-// the default brightness
-#define RGB_BACKLIGHT_BRIGHTNESS 255
-
-// the default effect (RGB test)
-#define RGB_BACKLIGHT_EFFECT 255
-
-// the default effect speed (0-3)
-#define RGB_BACKLIGHT_EFFECT_SPEED 0
-
-// the default color1 and color2
-#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 }
-#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 }
-
-// These define which keys in the matrix are alphas/mods
-// Used for backlight effects so colors are different for
-// alphas vs. mods
-// Each value is for a row, bit 0 is column 0
-// Alpha=0 Mod=1
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0b0000000000000001
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0b0010000000000001
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0b0011000000000001
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0011000000000001
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0011100000000111
-
-#define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
-#define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
-#define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
-#define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
-
-#define DYNAMIC_KEYMAP_LAYER_COUNT 4
-
-// EEPROM usage
-
-// TODO: refactor with new user EEPROM code (coming soon)
-#define EEPROM_MAGIC 0x451F
-#define EEPROM_MAGIC_ADDR 32
-// Bump this every time we change what we store
-// This will automatically reset the EEPROM with defaults
-// and avoid loading invalid data from the EEPROM
-#define EEPROM_VERSION 0x08
-#define EEPROM_VERSION_ADDR 34
-
-// Backlight config starts after EEPROM version
-#define RGB_BACKLIGHT_CONFIG_EEPROM_ADDR 35
-// Dynamic keymap starts after backlight config (35+31)
-#define DYNAMIC_KEYMAP_EEPROM_ADDR 66
-// Dynamic macro starts after dynamic keymaps (66+(4*5*14*2)) = (66+560)
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 626
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 398
-#define DYNAMIC_KEYMAP_MACRO_COUNT 16
+++ /dev/null
-{
- "keyboard_name": "M60-A",
- "url": "",
- "maintainer": "Wilba",
- "bootloader": "DFU",
- "width": 15,
- "height": 5,
- "layouts": {
- "LAYOUT_60_hhkb": {
- "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"~", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Delete", "x":13.5, "y":1, "w":1.5}, {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Os", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Alt", "x":11, "y":4, "w":1.5}, {"label":"Os", "x":12.5, "y":4}]
- }
- }
-}
\ No newline at end of file
+++ /dev/null
-// M60-A layout
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-// Default layer
-[0] = LAYOUT_60_hhkb(
- KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_DEL,
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,
- KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
- KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, FN_MO13,
- KC_LGUI, KC_LALT, KC_SPC, KC_RALT, FN_MO23),
-
-// Fn1 Layer
-[1] = LAYOUT_60_hhkb(
- KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL,
- KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_EJCT, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
-// Fn2 Layer
-[2] = LAYOUT_60_hhkb(
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
-// Fn3 Layer (zeal60 Configuration)
-[3] = LAYOUT_60_hhkb(
- KC_TRNS, EF_DEC, EF_INC, H1_DEC, H1_INC, H2_DEC, H2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BR_DEC, BR_INC, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, S1_DEC, S1_INC, S2_DEC, S2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, ES_DEC, ES_INC, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
-};
-
-
+++ /dev/null
-#pragma once
-
-// This fixes the diodes mounted reversed (fab fail) on M60-A prototype
-#undef DIODE_DIRECTION
-#define DIODE_DIRECTION ROW2COL
+++ /dev/null
-// M60-A layout
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-// Default layer
-[0] = LAYOUT_60_hhkb(
- KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_DEL,
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,
- KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
- KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, FN_MO13,
- KC_LGUI, KC_LALT, KC_SPC, KC_RALT, FN_MO23),
-
-// Fn1 Layer
-[1] = LAYOUT_60_hhkb(
- KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL,
- KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_EJCT, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
-// Fn2 Layer
-[2] = LAYOUT_60_hhkb(
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
-// Fn3 Layer (zeal60 Configuration)
-[3] = LAYOUT_60_hhkb(
- KC_TRNS, EF_DEC, EF_INC, H1_DEC, H1_INC, H2_DEC, H2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BR_DEC, BR_INC, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, S1_DEC, S1_INC, S2_DEC, S2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, ES_DEC, ES_INC, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
-};
-
-
+++ /dev/null
-/* Copyright 2017 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#ifndef RGB_BACKLIGHT_M60_A
-#error RGB_BACKLIGHT_M60_A not defined, you done goofed somehao, brah
-#endif
+++ /dev/null
-/* Copyright 2017 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#pragma once
-
-#include "quantum.h"
-#include "../../zeal60/rgb_backlight_keycodes.h"
-#include "../../zeal60/zeal60_keycodes.h"
-
-#define XXX KC_NO
-
-#define LAYOUT_60_hhkb( \
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D, \
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \
- K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
- K41, K42, K47, K4B, K4C \
-) { \
- { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
- { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
- { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \
- { K30, XXX, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \
- { XXX, K41, K42, XXX, XXX, XXX, XXX, K47, XXX, XXX, XXX, K4B, K4C, XXX } \
-}
-
+++ /dev/null
-# RAMA M60-A
-
-
-
-The M60-A represents the benchmark and equilibrium between function and design for us at Rama Works. The gently exaggerated design of the frame is not understated, but rather provocative. Inspiration and evolution from previous models are evident in the beautifully articulated design and the well defined aesthetic, the fingerprint of our 'Industrial Modern' designs. The M60-A offers a unique contender in the traditional 60% form factor. [More info at RAMA WORKS](https://rama.works/m60-a/)
-
-Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582)
-Hardware Supported: RAMA M60-A PCB
-Hardware Availability: [RAMA WORKS Store](https://ramaworks.store/)
-
-Make example for this keyboard (after setting up your build environment):
-
- make rama/m60_a:default
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file
+++ /dev/null
-
-
-# project specific files
-SRC = keyboards/zeal60/zeal60.c \
- keyboards/zeal60/rgb_backlight.c \
- quantum/color.c \
- drivers/issi/is31fl3731.c \
- drivers/avr/i2c_master.c
-
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-# Boot Section
-BOOTLOADER = atmel-dfu
-
-# Do not put the microcontroller into power saving mode
-# when we get USB suspend event. We want it to keep updating
-# backlight effects.
-OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
-
-# Build Options
-# change to "no" to disable the options, or define them in the Makefile in
-# the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = no # Console for debug(+400)
-COMMAND_ENABLE = no # Commands for debug and configuration
-NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
-MIDI_ENABLE = no # MIDI controls
-AUDIO_ENABLE = no # Audio output on port C6
-UNICODE_ENABLE = no # Unicode
-BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
-
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
-
-RAW_ENABLE = yes
-DYNAMIC_KEYMAP_ENABLE = yes
-CIE1931_CURVE = yes
-
-LAYOUTS = 60_hhkb
+++ /dev/null
-/* Copyright 2018 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#pragma once
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID 0x5241 // "RW"
-#define PRODUCT_ID 0x006A // 6-A
-#define DEVICE_VER 0x0001
-#define MANUFACTURER RAMA.WORKS
-#define PRODUCT RAMA M6-A
-#define DESCRIPTION RAMA M6-A Macropad
-
-/* key matrix size */
-#define MATRIX_ROWS 1
-#define MATRIX_COLS 6
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { E6 }
-#define MATRIX_COL_PINS { D4, B5, F4, D7, C6, F6 }
-#define UNUSED_PINS
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-#define RGB_BACKLIGHT_ENABLED 0
-
-#define DYNAMIC_KEYMAP_LAYER_COUNT 4
-
-// EEPROM usage
-
-// TODO: refactor with new user EEPROM code (coming soon)
-#define EEPROM_MAGIC 0x451F
-#define EEPROM_MAGIC_ADDR 32
-// Bump this every time we change what we store
-// This will automatically reset the EEPROM with defaults
-// and avoid loading invalid data from the EEPROM
-#define EEPROM_VERSION 0x08
-#define EEPROM_VERSION_ADDR 34
-
-// NOTE: M6-A doesn't use RGB backlight, but we keep this
-// consistent with M6-B which does.
-
-// Backlight config starts after EEPROM version
-#define RGB_BACKLIGHT_CONFIG_EEPROM_ADDR 35
-// Dynamic keymap starts after backlight config (35+43)
-#define DYNAMIC_KEYMAP_EEPROM_ADDR 78
-// Dynamic macro starts after dynamic keymaps (78+(4*6*2)) = (78+48)
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 126
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 898
-#define DYNAMIC_KEYMAP_MACRO_COUNT 16
+++ /dev/null
-{
- "keyboard_name": "m6-a",
- "url": "",
- "maintainer": "qmk",
- "width": 3,
- "height": 2,
- "layouts": {
- "LAYOUT": {
- "layout": [
- { "x": 0, "y": 0 },
- { "x": 1, "y": 0 },
- { "x": 2, "y": 0 },
- { "x": 0, "y": 1 },
- { "x": 1, "y": 1 },
- { "x": 2, "y": 1 }
- ]
- }
- }
-}
+++ /dev/null
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
- LAYOUT(
- KC_1, KC_2, KC_3, KC_4, KC_5, KC_6),
-
- LAYOUT(
- KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO),
-
- LAYOUT(
- KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO),
-
- LAYOUT(
- KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO) };
-
+++ /dev/null
-
-
-# Default RAMA M6-A Layout
-
-This is an example layout to demonstrate layer toggling.
-
-The top left key will cycle through six layers.
-
-If LEDs are installed, one of the six LEDs will be on to indicate current layer.
-
-LEDs should be installed cathode pin on the square pad.
-
+++ /dev/null
-/* Copyright 2017 Pawnerd
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
-
-// place overrides here
-
-#endif
+++ /dev/null
-#include QMK_KEYBOARD_H
-
-/*KNOPS_MISC*/
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
- /*KNOPS_LAYOUT*/
-
-};
-
-void set_led_state(int ledId, bool state)
-{
- if (state)
- {
- switch (ledId)
- {
- case 0:
- PORTD |= (1 << 6);
- break;
- case 1:
- PORTB |= (1 << 6);
- break;
- case 2:
- PORTF |= (1 << 5);
- break;
- case 3:
- PORTB |= (1 << 4);
- break;
- case 4:
- PORTC |= (1 << 7);
- break;
- case 5:
- PORTF |= (1 << 7);
- break;
- }
- }
- else
- {
- switch (ledId)
- {
- case 0:
- PORTD &= ~(1 << 6);
- break;
- case 1:
- PORTB &= ~(1 << 6);
- break;
- case 2:
- PORTF &= ~(1 << 5);
- break;
- case 3:
- PORTB &= ~(1 << 4);
- break;
- case 4:
- PORTC &= ~(1 << 7);
- break;
- case 5:
- PORTF &= ~(1 << 7);
- break;
- }
- }
-}
-
-void led_init_ports()
-{
- // Switch #1
- DDRD |= (1 << 6);
- PORTD &= ~(1 << 6);
-
- // Switch #2
- DDRB |= (1 << 6);
- PORTB &= ~(1 << 6);
-
- // Switch #3
- DDRF |= (1 << 5);
- PORTF &= ~(1 << 5);
-
- // Switch #4
- DDRB |= (1 << 4);
- PORTB &= ~(1 << 4);
-
- // Switch #5
- DDRC |= (1 << 7);
- PORTC &= ~(1 << 7);
-
- // Switch #6
- DDRF |= (1 << 7);
- PORTF &= ~(1 << 7);
-}
-
-void led_set_layer(int layer)
-{
-
- /*KNOPS_SIMPLELED_STATES*/
-}
-
-void matrix_init_user(void)
-{
- led_init_ports();
-
- led_set_layer(0);
-
- /*KNOPS_INIT*/
-}
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
- //keyevent_t event = record->event;
-
- /*KNOPS_MACRO*/
- return NULL;
-}
-
-void matrix_scan_user(void)
-{
- /*KNOPS_SCAN*/
-}
-
-void led_set_user(uint8_t usb_led)
-{
-
- /*KNOPS_FUNCTIONALLED_STATES*/
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record)
-{
-
- /*KNOPS_PROCESS_STATE*/
- return NULL;
-}
+++ /dev/null
-# Default Knops Mini Layout
-
-
-
-
-
-This is the keymap that our configurator uses to compile new keymaps and features. Here is a screenshot:
-
-
-
-As of 12th of february 2018, this tool has not yet been released to the public. You may have a look at our older tool, KBFlasher: [our (almost outdated) configurator tool](http://knops.io/configurator.html) for this.
\ No newline at end of file
+++ /dev/null
-# krusli's RAMA M6-A Layout
-
-Personal keymap for the RAMA M6-A.
-
-Keymap was from my own port for the M6-A before official support was added, thus the backlighting code is not ported yet from the official default keymap.
-
-Top-right button acts as a "toggle between layers" button. Layer 0 -> Layer 1 -> Layer 2 -> Layer 0 -> ...
-
-* Layer 0: Git and Discord shortcuts
-* Layer 1: Media playback and volume controls
-* Layer 2: Osu! gamepad layer
-
-## Helpful alternative keymaps (WIP)
-
-### Arrow cluster
-
-Use [karabiner-elements](https://github.com/tekezo/Karabiner-Elements) on macOS so that the state of the modifiers (shift, caps lock) are synchronised between keyboards (for shift + arrow key text selection, for example). It's also a handy tool for customising keyboard behaviour on a Mac.
-
-On Windows/Linux modifier state should be shared between all keyboards by default.
-
-Installation: install [homebrew](https://brew.sh) and run `brew install Caskroom/cask/karabiner-elements`.
-
-```C
-LAYOUT(
- KC_ESC, KC_UP, TO(_LAYER0),
- KC_LEFT, KC_DOWN, KC_RIGHT
-)
-```
+++ /dev/null
-#include QMK_KEYBOARD_H
-#include "action_layer.h"
-#include "eeconfig.h"
-
-extern keymap_config_t keymap_config;
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-
-enum layers
-{
- _LAYER0,
- _LAYER1,
- _LAYER2
-};
-
-enum custom_keycodes
-{
- GIT_ADD = SAFE_RANGE,
- GIT_COMMIT,
- GIT_PUSH,
- MUTE,
- DEAFEN
-};
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record)
-{
- if (record->event.pressed)
- {
- switch (keycode)
- {
- case GIT_ADD:
- SEND_STRING("git add ." SS_TAP(X_ENTER));
- break;
- case GIT_COMMIT:
- SEND_STRING("git commit -m " SS_DOWN(X_LSHIFT) SS_TAP(X_QUOTE) SS_UP(X_LSHIFT));
- break;
- case GIT_PUSH:
- SEND_STRING("git push" SS_TAP(X_ENTER));
- break;
- case MUTE:
- SEND_STRING(SS_LGUI(SS_LSFT("M")));
- break;
- case DEAFEN:
- SEND_STRING(SS_LGUI(SS_LSFT("D")));
- break;
- return false;
- }
- }
- return true;
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- [_LAYER0] = LAYOUT(
- MUTE, DEAFEN, TO(_LAYER1),
- GIT_ADD, GIT_COMMIT, GIT_PUSH),
- [_LAYER1] = LAYOUT(
- KC_VOLD, KC_VOLU, TO(_LAYER2),
- KC_MRWD, KC_MPLY, KC_MNXT),
- [_LAYER2] = LAYOUT(
- KC_ESC, KC_UP, TO(_LAYER0),
- KC_Z, KC_X, KC_SPACE)};
-
-void matrix_init_user(void)
-{
-#ifdef BACKLIGHT_ENABLE
- backlight_level(0);
-#endif
-}
+++ /dev/null
-/* Copyright 2018 Wilba
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
-
-// place overrides here
-
-#endif
\ No newline at end of file
+++ /dev/null
-#include QMK_KEYBOARD_H
-
-// Define Layers
-#define _BASE 0
-#define _FNX 1
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
- // Base Layer
- [_BASE] = LAYOUT(
- TO(1), KC_UP, KC_PGDN,
- KC_LEFT, KC_DOWN, KC_RGHT),
-
- // Fn Layer
- [_FNX] = LAYOUT(
- TO(0), KC_VOLU, KC_MPLY,
- KC_MRWD, KC_VOLD, KC_MFFD)};
\ No newline at end of file
+++ /dev/null
-Naut's Keymap
-=======
-
-Arrows for HHKB and Media keys for M65-A.
-
-Keymap Maintainer: [Jason Barnachea](https://github.com/nautxx)
-
-Difference from base layout: Similar.
-
-Intended usage: Arrows and Media Keys.
+++ /dev/null
-/* Copyright 2018 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
+++ /dev/null
-/* Copyright 2018 Wilba
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#include "quantum.h"
-
-#ifndef RAMA_M6_A_H
-#define RAMA_M6_A_H
-
-// This a shortcut to help you visually see your layout.
-// The first section contains all of the arguments
-// The second converts the arguments into a two-dimensional array
-#define LAYOUT( \
- K00, K01, K02, K03, K04, K05) \
- { \
- {K00, K01, K02, K03, K04, K05}, \
- }
-#endif // RAMA_M6_A
+++ /dev/null
-# RAMA M6-A
-
-
-
-A 6-key companion keyboard. [More info at RAMA WORKS](https://rama.works/m6a)
-
-Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582)
-Hardware Supported: RAMA M6-A PCB
-Hardware Availability: [RAMA WORKS Store](https://ramaworks.store/)
-
-Make example for this keyboard (after setting up your build environment):
-
- make rama/m6_a:default
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file
+++ /dev/null
-# project specific files
-SRC = keyboards/zeal60/zeal60.c
-
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-# Boot Section
-BOOTLOADER = atmel-dfu
-
-# Do not put the microcontroller into power saving mode
-# when we get USB suspend event. We want it to keep updating
-# backlight effects.
-OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
-
-
-# Build Options
-# change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = no # Console for debug(+400)
-COMMAND_ENABLE = no # Commands for debug and configuration
-NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
-MIDI_ENABLE = no # MIDI controls
-AUDIO_ENABLE = no # Audio output on port C6
-UNICODE_ENABLE = no # Unicode
-BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
-
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
-
-RAW_ENABLE = yes
-DYNAMIC_KEYMAP_ENABLE = yes
-CIE1931_CURVE = no
-
+++ /dev/null
-/* Copyright 2018 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#pragma once
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID 0x5241 // "RW"
-#define PRODUCT_ID 0x006B // 6-B
-#define DEVICE_VER 0x0001
-#define MANUFACTURER RAMA.WORKS
-#define PRODUCT RAMA M6-B
-#define DESCRIPTION RAMA M6-B Macropad
-
-/* key matrix size */
-#define MATRIX_ROWS 1
-#define MATRIX_COLS 6
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { E6 }
-#define MATRIX_COL_PINS { D4, B5, F4, D7, C6, F6 }
-#define UNUSED_PINS
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-#define RGB_BACKLIGHT_ENABLED 1
-
-// This conditionally compiles the backlight code for M6-B specifics
-#define RGB_BACKLIGHT_M6_B
-
-// enable/disable LEDs based on layout
-#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0
-#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0
-#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0
-#define RGB_BACKLIGHT_USE_7U_SPACEBAR 0
-#define RGB_BACKLIGHT_USE_ISO_ENTER 0
-#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0
-
-// disable backlight when USB suspended (PC sleep/hibernate/shutdown)
-#define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0
-
-// disable backlight after timeout in minutes, 0 = no timeout
-#define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0
-
-// the default brightness
-#define RGB_BACKLIGHT_BRIGHTNESS 255
-
-// the default effect (RGB test)
-#define RGB_BACKLIGHT_EFFECT 255
-
-// the default effect speed (0-3)
-#define RGB_BACKLIGHT_EFFECT_SPEED 0
-
-// the default color1 and color2
-#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 }
-#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 }
-
-// These define which keys in the matrix are alphas/mods
-// Used for backlight effects so colors are different for
-// alphas vs. mods
-// Each value is for a row, bit 0 is column 0
-// Alpha=0 Mod=1
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0
-
-#define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
-#define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
-#define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
-#define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
-
-#define DYNAMIC_KEYMAP_LAYER_COUNT 4
-
-// EEPROM usage
-
-// TODO: refactor with new user EEPROM code (coming soon)
-#define EEPROM_MAGIC 0x451F
-#define EEPROM_MAGIC_ADDR 32
-// Bump this every time we change what we store
-// This will automatically reset the EEPROM with defaults
-// and avoid loading invalid data from the EEPROM
-#define EEPROM_VERSION 0x08
-#define EEPROM_VERSION_ADDR 34
-
-// Backlight config starts after EEPROM version
-#define RGB_BACKLIGHT_CONFIG_EEPROM_ADDR 35
-// Dynamic keymap starts after backlight config (35+43)
-#define DYNAMIC_KEYMAP_EEPROM_ADDR 78
-// Dynamic macro starts after dynamic keymaps (78+(4*6*2)) = (78+48)
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 126
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 898
-#define DYNAMIC_KEYMAP_MACRO_COUNT 16
+++ /dev/null
-{
- "keyboard_name": "m6-b",
- "url": "",
- "maintainer": "qmk",
- "width": 3,
- "height": 2,
- "layouts": {
- "LAYOUT": {
- "layout": [
- { "x": 0, "y": 0 },
- { "x": 1, "y": 0 },
- { "x": 2, "y": 0 },
- { "x": 0, "y": 1 },
- { "x": 1, "y": 1 },
- { "x": 2, "y": 1 }
- ]
- }
- }
-}
+++ /dev/null
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
- LAYOUT(
- KC_1, KC_2, KC_3, KC_4, KC_5, KC_6),
-
- LAYOUT(
- KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO),
-
- LAYOUT(
- KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO),
-
- LAYOUT(
- KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO) };
-
+++ /dev/null
-/* Copyright 2018 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#ifndef RGB_BACKLIGHT_M6_B
-#error RGB_BACKLIGHT_M6_B not defined, you done goofed somehao, brah
-#endif
+++ /dev/null
-/* Copyright 2018 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#pragma once
-
-#include "quantum.h"
-
-// This a shortcut to help you visually see your layout.
-// The first section contains all of the arguments
-// The second converts the arguments into a two-dimensional array
-#define LAYOUT( \
- K00, K01, K02, K03, K04, K05) \
- { \
- {K00, K01, K02, K03, K04, K05}, \
- }
-
+++ /dev/null
-# RAMA M6-B
-
-
-
-A 6-key companion keyboard. [More info at RAMA WORKS](https://rama.works/m6a)
-
-Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582)
-Hardware Supported: RAMA M6-B PCB
-Hardware Availability: [RAMA WORKS Store](https://ramaworks.store/)
-
-Make example for this keyboard (after setting up your build environment):
-
- make rama/m6_b:default
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file
+++ /dev/null
-# project specific files
-SRC = keyboards/zeal60/zeal60.c \
- keyboards/zeal60/rgb_backlight.c \
- quantum/color.c \
- drivers/issi/is31fl3218.c \
- drivers/avr/i2c_master.c
-
-
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-# Boot Section
-BOOTLOADER = atmel-dfu
-
-# Do not put the microcontroller into power saving mode
-# when we get USB suspend event. We want it to keep updating
-# backlight effects.
-OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
-
-
-# Build Options
-# change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = no # Console for debug(+400)
-COMMAND_ENABLE = no # Commands for debug and configuration
-NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
-MIDI_ENABLE = no # MIDI controls
-AUDIO_ENABLE = no # Audio output on port C6
-UNICODE_ENABLE = no # Unicode
-BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
-
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
-
-RAW_ENABLE = yes
-DYNAMIC_KEYMAP_ENABLE = yes
-CIE1931_CURVE = yes
-
+++ /dev/null
-# RAMA
-
-Firmware for keyboards designed by [RAMA WORKS](https://rama.works)
-
-[RAMA M6-A](https://rama.works/m6a)
-
-[RAMA M60-A](https://rama.works/#/m60-a/)
-
-[RAMA U80-A](https://rama.works/#/tkl-a/)
-
-[RAMA M10-B](https://www.massdrop.com/buy/rama-m10-a?mode=guest_open)
+++ /dev/null
-/* Copyright 2018 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID 0x5241 // "RW"
-#define PRODUCT_ID 0x080A // 80-A
-#define DEVICE_VER 0x0001
-#define MANUFACTURER RAMA.WORKS
-#define PRODUCT RAMA U80-A
-#define DESCRIPTION RAMA U80-A Keyboard
-
-/* key matrix size */
-#define MATRIX_ROWS 6
-#define MATRIX_COLS 17
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F1, F0, E6, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4, B7, B0 }
-#define UNUSED_PINS
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION ROW2COL
-
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1 H
-//#define MAGIC_KEY_HELP2 SLASH
-//#define MAGIC_KEY_DEBUG D
-//#define MAGIC_KEY_DEBUG_MATRIX X
-//#define MAGIC_KEY_DEBUG_KBD K
-//#define MAGIC_KEY_DEBUG_MOUSE M
-//#define MAGIC_KEY_VERSION V
-//#define MAGIC_KEY_STATUS S
-//#define MAGIC_KEY_CONSOLE C
-//#define MAGIC_KEY_LAYER0_ALT1 ESC
-//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
-//#define MAGIC_KEY_LAYER0 0
-//#define MAGIC_KEY_LAYER1 1
-//#define MAGIC_KEY_LAYER2 2
-//#define MAGIC_KEY_LAYER3 3
-//#define MAGIC_KEY_LAYER4 4
-//#define MAGIC_KEY_LAYER5 5
-//#define MAGIC_KEY_LAYER6 6
-//#define MAGIC_KEY_LAYER7 7
-//#define MAGIC_KEY_LAYER8 8
-//#define MAGIC_KEY_LAYER9 9
-//#define MAGIC_KEY_BOOTLOADER PAUSE
-//#define MAGIC_KEY_LOCK CAPS
-//#define MAGIC_KEY_EEPROM E
-//#define MAGIC_KEY_NKRO N
-//#define MAGIC_KEY_SLEEP_LED Z
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-/*
- * MIDI options
- */
-
-/* Prevent use of disabled MIDI features in the keymap */
-//#define MIDI_ENABLE_STRICT 1
-
-/* enable basic MIDI features:
- - MIDI notes can be sent when in Music mode is on
-*/
-//#define MIDI_BASIC
-
-/* enable advanced MIDI features:
- - MIDI notes can be added to the keymap
- - Octave shift and transpose
- - Virtual sustain, portamento, and modulation wheel
- - etc.
-*/
-//#define MIDI_ADVANCED
-
-/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
-//#define MIDI_TONE_KEYCODE_OCTAVES 1
-
-#define WT_MONO_BACKLIGHT
-
-#define DYNAMIC_KEYMAP_LAYER_COUNT 4
-
-// EEPROM usage
-
-// TODO: refactor with new user EEPROM code (coming soon)
-#define EEPROM_MAGIC 0x451F
-#define EEPROM_MAGIC_ADDR 32
-// Bump this every time we change what we store
-// This will automatically reset the EEPROM with defaults
-// and avoid loading invalid data from the EEPROM
-#define EEPROM_VERSION 0x07
-#define EEPROM_VERSION_ADDR 34
-
-// Dynamic keymap starts after EEPROM version
-#define DYNAMIC_KEYMAP_EEPROM_ADDR 35
-// Dynamic macro starts after dynamic keymaps (35+(4*6*17*2)) = (35+816)
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 851
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 173
-#define DYNAMIC_KEYMAP_MACRO_COUNT 16
+++ /dev/null
-{
- "keyboard_name": "RAMA U80-A",
- "url": "https://rama.works/#/tkl-a/",
- "maintainer": "Wilba",
- "bootloader": "atmel-dfu",
- "width": 18.25,
- "height": 6.5,
- "layouts": {
- "LAYOUT_all": {
- "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5}, {"x":14, "y":1.5}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"Shift", "x":0, "y":4.5, "w":2.25}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":1.75}, {"x":14, "y":4.5}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}]
- }
- }
-}
+++ /dev/null
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
- [0] = LAYOUT_all(
- KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS,
- KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_INS, KC_HOME, KC_PGUP,
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN,
- KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
- KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_TRNS, KC_UP,
- KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
-
- [1] = LAYOUT_all(
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
- [2] = LAYOUT_all(
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
- [3] = LAYOUT_all(
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-};
-
+++ /dev/null
-# RAMA U80-A
-
-
-
-A TKL keyboard. [More info at RAMA WORKS](https://rama.works/#/tkl-a/)
-
-Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582)
-Hardware Supported: RAMA U80-A PCB
-Hardware Availability: [RAMA WORKS Store](https://ramaworks.store/)
-
-Make example for this keyboard (after setting up your build environment):
-
- make rama/u80_a:default
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file
+++ /dev/null
-# project specific files
-SRC = drivers/issi/is31fl3736.c \
- drivers/avr/i2c_master.c \
- keyboards/wilba_tech/wt_mono_backlight.c \
- keyboards/wilba_tech/wt_main.c
-
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section
-BOOTLOADER = atmel-dfu
-
-
-# Build Options
-# change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = no # Console for debug(+400)
-COMMAND_ENABLE = no # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = yes # USB Nkey Rollover
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
-UNICODE_ENABLE = no # Unicode
-BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no # Audio output on port C6
-FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-
-RAW_ENABLE = yes
-DYNAMIC_KEYMAP_ENABLE = yes
+++ /dev/null
-/* Copyright 2018 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-// Nothing to see here, move along... ;-)
+++ /dev/null
-/* Copyright 2018 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#include "quantum.h"
-
-#define ____ KC_NO
-
-// Right switch of split backspace is at 3,13 and is the only switch
-// whose physical position doesn't match switch matrix position :-(
-// However, it also makes no sense to view the physical as 18 columns,
-// so the numbering goes 00 to 16. Deal with it.
-
-#define LAYOUT_all( \
- K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K015, K016, \
- K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K313, K114, K115, K116, \
- K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, \
- K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, \
- K400, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K415, \
- K500, K501, K502, K506, K510, K511, K512, K513, K514, K515, K516 \
-) { \
- { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, ____, K014, K015, K016 }, \
- { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116 }, \
- { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216 }, \
- { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, ____, ____, ____ }, \
- { K400, ____, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, ____, K415, ____ }, \
- { K500, K501, K502, ____, ____, ____, K506, ____, ____, ____, K510, K511, K512, K513, K514, K515, K516 } \
-}
-
--- /dev/null
+/* Copyright 2017 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "config_common.h"
+
+// USB Device descriptor parameter
+#define VENDOR_ID 0x5241 // "RW"
+#define PRODUCT_ID 0x4B59 // "KY"
+#define DEVICE_VER 0x0001
+#define MANUFACTURER RAMA WORKS
+#define PRODUCT RAMA WORKS KOYU
+#define DESCRIPTION RAMA WORKS KOYU
+
+
+
+// key matrix size
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+// KOYU PCB pin-out
+#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
+#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 }
+#define UNUSED_PINS
+
+// IS31FL3731 driver
+#define DRIVER_COUNT 2
+#define DRIVER_LED_TOTAL 72
+
+// COL2ROW or ROW2COL
+#define DIODE_DIRECTION COL2ROW
+
+// Set 0 if debouncing isn't needed
+#define DEBOUNCE 5
+
+// Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap
+#define LOCKING_SUPPORT_ENABLE
+// Locking resynchronize hack
+#define LOCKING_RESYNC_ENABLE
+
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+// disable debug print
+//#define NO_DEBUG
+
+// disable print
+//#define NO_PRINT
+
+// disable action features
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#define RGB_BACKLIGHT_ENABLED 1
+
+// This conditionally compiles the backlight code for KOYU specifics
+#define RGB_BACKLIGHT_KOYU
+
+// enable/disable LEDs based on layout
+// they aren't really used if RGB_BACKLIGHT_M60_A defined
+#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 1
+#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0
+#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 1
+#define RGB_BACKLIGHT_USE_7U_SPACEBAR 1
+#define RGB_BACKLIGHT_USE_ISO_ENTER 0
+#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 1
+
+// disable backlight when USB suspended (PC sleep/hibernate/shutdown)
+#define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0
+
+// disable backlight after timeout in minutes, 0 = no timeout
+#define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0
+
+// the default brightness
+#define RGB_BACKLIGHT_BRIGHTNESS 255
+
+// the default effect (RGB test)
+#define RGB_BACKLIGHT_EFFECT 255
+
+// the default effect speed (0-3)
+#define RGB_BACKLIGHT_EFFECT_SPEED 0
+
+// the default color1 and color2
+#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 }
+#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 }
+
+// These define which keys in the matrix are alphas/mods
+// Used for backlight effects so colors are different for
+// alphas vs. mods
+// Each value is for a row, bit 0 is column 0
+// Alpha=0 Mod=1
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0b0110000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0b0110000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0b0111000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0111000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0111100000000111
+
+#define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+#define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+#define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+#define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+
+#define DYNAMIC_KEYMAP_LAYER_COUNT 4
+
+// EEPROM usage
+
+// TODO: refactor with new user EEPROM code (coming soon)
+#define EEPROM_MAGIC 0x451F
+#define EEPROM_MAGIC_ADDR 32
+// Bump this every time we change what we store
+// This will automatically reset the EEPROM with defaults
+// and avoid loading invalid data from the EEPROM
+#define EEPROM_VERSION 0x08
+#define EEPROM_VERSION_ADDR 34
+
+// Backlight config starts after EEPROM version
+#define RGB_BACKLIGHT_CONFIG_EEPROM_ADDR 35
+// Dynamic keymap starts after backlight config (35+31)
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 66
+// Dynamic macro starts after dynamic keymaps (66+(4*5*15*2)) = (66+600)
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 666
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 358
+#define DYNAMIC_KEYMAP_MACRO_COUNT 16
--- /dev/null
+{
+ "keyboard_name": "RAMA WORKS KOYU",
+ "url": "http://rama.works",
+ "maintainer": "Wilba",
+ "bootloader": "atmel-dfu",
+ "width": 16,
+ "height": 5,
+ "layouts": {
+ "LAYOUT_all": {
+ "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"PrtSc", "x":13, "y":0}, {"label":"Pause", "x":14, "y":0}, {"label":"Num Lock", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Insert", "x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Home", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"\u2191", "x":14, "y":3}, {"label":"/", "x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Ctrl", "x":11, "y":4, "w":1.5}, {"label":"\u2190", "x":13, "y":4}, {"label":"\u2193", "x":14, "y":4}, {"label":"\u2192", "x":15, "y":4}]
+ }
+ }
+}
\ No newline at end of file
--- /dev/null
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ // Default layer
+ [0] = LAYOUT_all(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_DEL, KC_HOME,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_PGUP,
+ KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END,
+ MO(1), KC_LGUI, KC_LALT, KC_SPC, MO(2), KC_LEFT, KC_DOWN, KC_RGHT),
+
+ // Fn1 Layer
+ [1] = LAYOUT_all(
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, KC_TRNS,
+ KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_EJCT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+ // Fn2 Layer
+ [2] = LAYOUT_all(
+ KC_TRNS, EF_DEC, EF_INC, H1_DEC, H1_INC, H2_DEC, H2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BR_DEC, BR_INC, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, S1_DEC, S1_INC, S2_DEC, S2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, ES_DEC, ES_INC, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+ // Fn3 Layer
+ [3] = LAYOUT_all(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+};
--- /dev/null
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef RGB_BACKLIGHT_KOYU
+#error RGB_BACKLIGHT_KOYU not defined, you done goofed somehao, brah
+#endif
--- /dev/null
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+#include "keyboards/wilba_tech/wt_rgb_backlight_keycodes.h"
+#include "keyboards/wilba_tech/via_keycodes.h"
+
+#define ____ KC_NO
+
+// Right switch of split backspace is at 2,13 and is the only switch
+// whose physical position doesn't match switch matrix position :-(
+// However, it also makes no sense to view the physical as 16 columns,
+// so the numbering goes 00 to 14. Deal with it.
+
+#define LAYOUT_all( \
+ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K213, K014, \
+ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K214, \
+ K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, \
+ K400, K401, K402, K407, K411, K412, K413, K414 \
+) { \
+ { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \
+ { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \
+ { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214 }, \
+ { K300, ____, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314 }, \
+ { K400, K401, K402, ____, ____, ____, ____, K407, ____, ____, ____, K411, K412, K413, K414 } \
+}
--- /dev/null
+# RAMA WORKS KOYU
+
+
+
+The 'wait' for something isn't the most conscious desire, but that anticipation creates nostalgia.
+
+At Rama Works, you've embraced this. From updates of the blog, to direct communication with the community, being part of a Rama Works product doesn't just start when you receive it. If you've ever received a Rama Works product, you know that no detail is overlooked.
+
+Let us take you on a journey that will capture that sensory experience, and explore the gravitational interaction between aesthetic and design. The Rama Works 'X' element personifies the understanding that taking something away doesn't necessarily make it less.
+
+This is the sound of Rama Works. Never too busy-a feeling of delightful modern weightlessness. A rich sonic experience. Sparse and ethereal, this music boldly inhabits a nondescript, borderless space. Warm, synthetic textures, bespoke musical sound design. percussive elements percolating and accentuating movement on the screen and in the stereo field. a sonic palette full of clicks, taps and resonances evoking a sense of calm comfort and familiarity.
+
+[More info at RAMA WORKS](https://rama.works/koyu/)
+
+Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582)
+Hardware Supported: RAMA WORKS KOYU PCB
+Hardware Availability: [RAMA WORKS Store](https://ramaworks.store/)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make wilba_tech/rama_works_koyu:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file
--- /dev/null
+
+
+# project specific files
+SRC = keyboards/wilba_tech/wt_main.c \
+ keyboards/wilba_tech/wt_rgb_backlight.c \
+ quantum/color.c \
+ drivers/issi/is31fl3731.c \
+ drivers/avr/i2c_master.c
+
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Boot Section
+BOOTLOADER = atmel-dfu
+
+# Do not put the microcontroller into power saving mode
+# when we get USB suspend event. We want it to keep updating
+# backlight effects.
+OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
+
+# Build Options
+# change to "no" to disable the options, or define them in the Makefile in
+# the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no # Audio output on port C6
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+
+RAW_ENABLE = yes
+DYNAMIC_KEYMAP_ENABLE = yes
+CIE1931_CURVE = yes
+
+#LAYOUTS = ???
--- /dev/null
+/*
+Copyright 2018 Wilba
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0x5241 // "RW"
+#define PRODUCT_ID 0x00AB // 10-B
+#define DEVICE_VER 0x0001
+#define MANUFACTURER RAMA WORKS
+#define PRODUCT RAMA WORKS M10-B
+#define DESCRIPTION RAMA WORKS M10-B
+
+/* key matrix size */
+#define MATRIX_ROWS 1
+#define MATRIX_COLS 10
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { E6 }
+#define MATRIX_COL_PINS { D7, B6, F0, D6, B5, F1, D4, B4, F4, F5 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN C6
+//#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 3
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1 H
+//#define MAGIC_KEY_HELP2 SLASH
+//#define MAGIC_KEY_DEBUG D
+//#define MAGIC_KEY_DEBUG_MATRIX X
+//#define MAGIC_KEY_DEBUG_KBD K
+//#define MAGIC_KEY_DEBUG_MOUSE M
+//#define MAGIC_KEY_VERSION V
+//#define MAGIC_KEY_STATUS S
+//#define MAGIC_KEY_CONSOLE C
+//#define MAGIC_KEY_LAYER0_ALT1 ESC
+//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
+//#define MAGIC_KEY_LAYER0 0
+//#define MAGIC_KEY_LAYER1 1
+//#define MAGIC_KEY_LAYER2 2
+//#define MAGIC_KEY_LAYER3 3
+//#define MAGIC_KEY_LAYER4 4
+//#define MAGIC_KEY_LAYER5 5
+//#define MAGIC_KEY_LAYER6 6
+//#define MAGIC_KEY_LAYER7 7
+//#define MAGIC_KEY_LAYER8 8
+//#define MAGIC_KEY_LAYER9 9
+//#define MAGIC_KEY_BOOTLOADER PAUSE
+//#define MAGIC_KEY_LOCK CAPS
+//#define MAGIC_KEY_EEPROM E
+//#define MAGIC_KEY_NKRO N
+//#define MAGIC_KEY_SLEEP_LED Z
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+ - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+ - MIDI notes can be added to the keymap
+ - Octave shift and transpose
+ - Virtual sustain, portamento, and modulation wheel
+ - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+//#define WT_MONO_BACKLIGHT
+
+#define DYNAMIC_KEYMAP_LAYER_COUNT 4
+
+// EEPROM usage
+
+// TODO: refactor with new user EEPROM code (coming soon)
+#define EEPROM_MAGIC 0x451F
+#define EEPROM_MAGIC_ADDR 32
+// Bump this every time we change what we store
+// This will automatically reset the EEPROM with defaults
+// and avoid loading invalid data from the EEPROM
+#define EEPROM_VERSION 0x08
+#define EEPROM_VERSION_ADDR 34
+
+// Dynamic keymap starts after EEPROM version
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 35
+// Dynamic macro starts after dynamic keymaps (35+(4*10*2)) = (35+80)
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 115
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 909
+#define DYNAMIC_KEYMAP_MACRO_COUNT 16
+
+#endif
--- /dev/null
+{
+ "keyboard_name": "RAMA WORKS M10-B",
+ "url": "http://rama.works",
+ "maintainer": "Wilba",
+ "width": 3,
+ "height": 4,
+ "layouts": {
+ "LAYOUT": {
+ "layout": [
+ { "x": 0, "y": 0 },
+ { "x": 1, "y": 0 },
+ { "x": 2, "y": 0 },
+ { "x": 0, "y": 1 },
+ { "x": 1, "y": 1 },
+ { "x": 2, "y": 1 },
+ { "x": 0, "y": 2 },
+ { "x": 1, "y": 2 },
+ { "x": 2, "y": 2 },
+ { "x": 1, "y": 3, "w": 2.0 }
+ ]
+ }
+ }
+}
--- /dev/null
+/* Copyright 2018 Wilba
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here
--- /dev/null
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ LAYOUT(
+ KC_KP_7, KC_KP_8, KC_KP_9, KC_KP_4, KC_KP_5, KC_KP_6, KC_KP_1, KC_KP_2, KC_KP_3, KC_KP_0 )
+
+};
--- /dev/null
+
+
+# Default RAMA M10-B Layout
+
+This is an example layout.
+
+
--- /dev/null
+/* Copyright 2018 Wilba
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+#undef RAW_ENABLE
+#undef DYNAMIC_KEYMAP_ENABLE
+
+#endif
--- /dev/null
+#include QMK_KEYBOARD_H
+
+/*KNOPS_MISC*/
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ /*KNOPS_LAYOUT*/
+
+};
+
+// M10-B LEDs are all in parallel and controlled by the QMK backlight
+// functionality. LED functions here are for possible future use
+// as layer indicators, etc. and not implemented yet.
+//
+// To implement LED functions here, QMK backlight functionality
+// will need to be disabled either via rules.mk or config.h
+// or overriding the backlight functions to do nothing.
+//
+// LEDs are driven by a transistor connected to pin C6.
+//
+
+void set_led_state(int ledId, bool state)
+{
+}
+
+void led_init_ports()
+{
+}
+
+void led_set_layer(int layer)
+{
+ led_init_ports();
+
+ led_set_layer(0);
+
+ /*KNOPS_SIMPLELED_STATES*/
+}
+
+void matrix_init_user(void)
+{
+ /*KNOPS_INIT*/
+}
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+ /*KNOPS_MACRO*/
+ return NULL;
+}
+
+void matrix_scan_user(void)
+{
+ /*KNOPS_SCAN*/
+}
+
+void led_set_user(uint8_t usb_led)
+{
+ /*KNOPS_FUNCTIONALLED_STATES*/
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record)
+{
+ /*KNOPS_PROCESS_STATE*/
+ return NULL;
+}
--- /dev/null
+
+
+# Default RAMA M10-B Layout
+
+This is an example layout.
+
+
--- /dev/null
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+// Nothing to see here, move along... ;-)
--- /dev/null
+/* Copyright 2018 Wilba
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "quantum.h"
+
+#ifndef RAMA_M10_B_H
+#define RAMA_M10_B_H
+
+// This a shortcut to help you visually see your layout.
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+#define LAYOUT( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09 ) \
+ { \
+ {K00, K01, K02, K03, K04, K05, K06, K07, K08, K09}, \
+ }
+#endif // RAMA_M10_B
--- /dev/null
+# RAMA WORKS M10-B
+
+
+
+Mechanical Mini Pad. [More info at Massdrop](https://www.massdrop.com/buy/rama-m10-a)
+
+Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582)
+Hardware Supported: RAMA WORKS M10-B PCB
+Hardware Availability: [Massdrop](https://www.massdrop.com/buy/rama-m10-a)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make wilba_tech/rama_works_m10_b:default
+
+See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
\ No newline at end of file
--- /dev/null
+# project specific files
+SRC = keyboards/wilba_tech/wt_main.c
+
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section
+BOOTLOADER = atmel-dfu
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6
+FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
+
+RAW_ENABLE = yes
+DYNAMIC_KEYMAP_ENABLE = yes
--- /dev/null
+/* Copyright 2017 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "config_common.h"
+
+// USB Device descriptor parameter
+#define VENDOR_ID 0x5241 // "RW"
+#define PRODUCT_ID 0x060A // 60-A
+#define DEVICE_VER 0x0001
+#define MANUFACTURER RAMA WORKS
+#define PRODUCT RAMA WORKS M60-A
+#define DESCRIPTION RAMA WORKS M60-A
+
+// key matrix size
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+// M60-A PCB default pin-out
+#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
+#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 }
+#define UNUSED_PINS
+
+// IS31FL3731 driver
+#define DRIVER_COUNT 2
+#define DRIVER_LED_TOTAL 72
+
+// COL2ROW or ROW2COL
+#define DIODE_DIRECTION COL2ROW
+
+// Set 0 if debouncing isn't needed
+#define DEBOUNCE 5
+
+// Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap
+#define LOCKING_SUPPORT_ENABLE
+// Locking resynchronize hack
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+// disable debug print
+//#define NO_DEBUG
+
+// disable print
+//#define NO_PRINT
+
+// disable action features
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#define RGB_BACKLIGHT_ENABLED 1
+
+// This conditionally compiles the backlight code for M60-A specifics
+#define RGB_BACKLIGHT_M60_A
+
+// enable/disable LEDs based on layout
+// they aren't really used if RGB_BACKLIGHT_M60_A defined
+#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 1
+#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0
+#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 1
+#define RGB_BACKLIGHT_USE_7U_SPACEBAR 1
+#define RGB_BACKLIGHT_USE_ISO_ENTER 0
+#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 1
+
+// disable backlight when USB suspended (PC sleep/hibernate/shutdown)
+#define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0
+
+// disable backlight after timeout in minutes, 0 = no timeout
+#define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0
+
+// the default brightness
+#define RGB_BACKLIGHT_BRIGHTNESS 255
+
+// the default effect (RGB test)
+#define RGB_BACKLIGHT_EFFECT 255
+
+// the default effect speed (0-3)
+#define RGB_BACKLIGHT_EFFECT_SPEED 0
+
+// the default color1 and color2
+#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 }
+#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 }
+
+// These define which keys in the matrix are alphas/mods
+// Used for backlight effects so colors are different for
+// alphas vs. mods
+// Each value is for a row, bit 0 is column 0
+// Alpha=0 Mod=1
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0b0000000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0b0010000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0b0011000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0011000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0011100000000111
+
+#define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+#define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+#define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+#define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+
+#define DYNAMIC_KEYMAP_LAYER_COUNT 4
+
+// EEPROM usage
+
+// TODO: refactor with new user EEPROM code (coming soon)
+#define EEPROM_MAGIC 0x451F
+#define EEPROM_MAGIC_ADDR 32
+// Bump this every time we change what we store
+// This will automatically reset the EEPROM with defaults
+// and avoid loading invalid data from the EEPROM
+#define EEPROM_VERSION 0x08
+#define EEPROM_VERSION_ADDR 34
+
+// Backlight config starts after EEPROM version
+#define RGB_BACKLIGHT_CONFIG_EEPROM_ADDR 35
+// Dynamic keymap starts after backlight config (35+31)
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 66
+// Dynamic macro starts after dynamic keymaps (66+(4*5*14*2)) = (66+560)
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 626
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 398
+#define DYNAMIC_KEYMAP_MACRO_COUNT 16
--- /dev/null
+{
+ "keyboard_name": "RAMA WORKS M60-A",
+ "url": "http://rama.works",
+ "maintainer": "Wilba",
+ "bootloader": "atmel-dfu",
+ "width": 15,
+ "height": 5,
+ "layouts": {
+ "LAYOUT_60_hhkb": {
+ "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"~", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Delete", "x":13.5, "y":1, "w":1.5}, {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Os", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Alt", "x":11, "y":4, "w":1.5}, {"label":"Os", "x":12.5, "y":4}]
+ }
+ }
+}
\ No newline at end of file
--- /dev/null
+// M60-A layout
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+// Default layer
+[0] = LAYOUT_60_hhkb(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_DEL,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,
+ KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, FN_MO13,
+ KC_LGUI, KC_LALT, KC_SPC, KC_RALT, FN_MO23),
+
+// Fn1 Layer
+[1] = LAYOUT_60_hhkb(
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL,
+ KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_EJCT, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+// Fn2 Layer
+[2] = LAYOUT_60_hhkb(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+// Fn3 Layer (zeal60 Configuration)
+[3] = LAYOUT_60_hhkb(
+ KC_TRNS, EF_DEC, EF_INC, H1_DEC, H1_INC, H2_DEC, H2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BR_DEC, BR_INC, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, S1_DEC, S1_INC, S2_DEC, S2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, ES_DEC, ES_INC, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+};
+
+
--- /dev/null
+#pragma once
+
+// This fixes the diodes mounted reversed (fab fail) on M60-A prototype
+#undef DIODE_DIRECTION
+#define DIODE_DIRECTION ROW2COL
--- /dev/null
+// M60-A layout
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+// Default layer
+[0] = LAYOUT_60_hhkb(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_DEL,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,
+ KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, FN_MO13,
+ KC_LGUI, KC_LALT, KC_SPC, KC_RALT, FN_MO23),
+
+// Fn1 Layer
+[1] = LAYOUT_60_hhkb(
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL,
+ KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_EJCT, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+// Fn2 Layer
+[2] = LAYOUT_60_hhkb(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+// Fn3 Layer (zeal60 Configuration)
+[3] = LAYOUT_60_hhkb(
+ KC_TRNS, EF_DEC, EF_INC, H1_DEC, H1_INC, H2_DEC, H2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BR_DEC, BR_INC, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, S1_DEC, S1_INC, S2_DEC, S2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, ES_DEC, ES_INC, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+};
+
+
--- /dev/null
+/* Copyright 2017 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef RGB_BACKLIGHT_M60_A
+#error RGB_BACKLIGHT_M60_A not defined, you done goofed somehao, brah
+#endif
--- /dev/null
+/* Copyright 2017 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+#include "keyboards/wilba_tech/wt_rgb_backlight_keycodes.h"
+#include "keyboards/wilba_tech/via_keycodes.h"
+
+#define XXX KC_NO
+
+#define LAYOUT_60_hhkb( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \
+ K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
+ K41, K42, K47, K4B, K4C \
+) { \
+ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
+ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
+ { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \
+ { K30, XXX, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \
+ { XXX, K41, K42, XXX, XXX, XXX, XXX, K47, XXX, XXX, XXX, K4B, K4C, XXX } \
+}
+
--- /dev/null
+# RAMA WORKS M60-A
+
+
+
+The M60-A represents the benchmark and equilibrium between function and design for us at Rama Works. The gently exaggerated design of the frame is not understated, but rather provocative. Inspiration and evolution from previous models are evident in the beautifully articulated design and the well defined aesthetic, the fingerprint of our 'Industrial Modern' designs. The M60-A offers a unique contender in the traditional 60% form factor. [More info at RAMA WORKS](https://rama.works/m60-a/)
+
+Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582)
+Hardware Supported: RAMA WORKS M60-A PCB
+Hardware Availability: [RAMA WORKS Store](https://ramaworks.store/)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make wilba_tech/rama_works_m60_a:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file
--- /dev/null
+
+
+# project specific files
+SRC = keyboards/wilba_tech/wt_main.c \
+ keyboards/wilba_tech/wt_rgb_backlight.c \
+ quantum/color.c \
+ drivers/issi/is31fl3731.c \
+ drivers/avr/i2c_master.c
+
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Boot Section
+BOOTLOADER = atmel-dfu
+
+# Do not put the microcontroller into power saving mode
+# when we get USB suspend event. We want it to keep updating
+# backlight effects.
+OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
+
+# Build Options
+# change to "no" to disable the options, or define them in the Makefile in
+# the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no # Audio output on port C6
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+
+RAW_ENABLE = yes
+DYNAMIC_KEYMAP_ENABLE = yes
+CIE1931_CURVE = yes
+
+LAYOUTS = 60_hhkb
--- /dev/null
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0x5241 // "RW"
+#define PRODUCT_ID 0x006A // 6-A
+#define DEVICE_VER 0x0001
+#define MANUFACTURER RAMA WORKS
+#define PRODUCT RAMA WORKS M6-A
+#define DESCRIPTION RAMA WORKS M6-A
+
+/* key matrix size */
+#define MATRIX_ROWS 1
+#define MATRIX_COLS 6
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { E6 }
+#define MATRIX_COL_PINS { D4, B5, F4, D7, C6, F6 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+#define RGB_BACKLIGHT_ENABLED 0
+
+#define DYNAMIC_KEYMAP_LAYER_COUNT 4
+
+// EEPROM usage
+
+// TODO: refactor with new user EEPROM code (coming soon)
+#define EEPROM_MAGIC 0x451F
+#define EEPROM_MAGIC_ADDR 32
+// Bump this every time we change what we store
+// This will automatically reset the EEPROM with defaults
+// and avoid loading invalid data from the EEPROM
+#define EEPROM_VERSION 0x08
+#define EEPROM_VERSION_ADDR 34
+
+// NOTE: M6-A doesn't use RGB backlight, but we keep this
+// consistent with M6-B which does.
+
+// Backlight config starts after EEPROM version
+#define RGB_BACKLIGHT_CONFIG_EEPROM_ADDR 35
+// Dynamic keymap starts after backlight config (35+43)
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 78
+// Dynamic macro starts after dynamic keymaps (78+(4*6*2)) = (78+48)
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 126
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 898
+#define DYNAMIC_KEYMAP_MACRO_COUNT 16
--- /dev/null
+{
+ "keyboard_name": "RAMA WORKS M6-A",
+ "url": "http://rama.works",
+ "maintainer": "Wilba",
+ "width": 3,
+ "height": 2,
+ "layouts": {
+ "LAYOUT": {
+ "layout": [
+ { "x": 0, "y": 0 },
+ { "x": 1, "y": 0 },
+ { "x": 2, "y": 0 },
+ { "x": 0, "y": 1 },
+ { "x": 1, "y": 1 },
+ { "x": 2, "y": 1 }
+ ]
+ }
+ }
+}
--- /dev/null
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ LAYOUT(
+ KC_1, KC_2, KC_3, KC_4, KC_5, KC_6),
+
+ LAYOUT(
+ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO),
+
+ LAYOUT(
+ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO),
+
+ LAYOUT(
+ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO) };
+
--- /dev/null
+
+
+# Default RAMA M6-A Layout
+
+This is an example layout to demonstrate layer toggling.
+
+The top left key will cycle through six layers.
+
+If LEDs are installed, one of the six LEDs will be on to indicate current layer.
+
+LEDs should be installed cathode pin on the square pad.
+
--- /dev/null
+/* Copyright 2017 Pawnerd
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// place overrides here
+
+#endif
--- /dev/null
+#include QMK_KEYBOARD_H
+
+/*KNOPS_MISC*/
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ /*KNOPS_LAYOUT*/
+
+};
+
+void set_led_state(int ledId, bool state)
+{
+ if (state)
+ {
+ switch (ledId)
+ {
+ case 0:
+ PORTD |= (1 << 6);
+ break;
+ case 1:
+ PORTB |= (1 << 6);
+ break;
+ case 2:
+ PORTF |= (1 << 5);
+ break;
+ case 3:
+ PORTB |= (1 << 4);
+ break;
+ case 4:
+ PORTC |= (1 << 7);
+ break;
+ case 5:
+ PORTF |= (1 << 7);
+ break;
+ }
+ }
+ else
+ {
+ switch (ledId)
+ {
+ case 0:
+ PORTD &= ~(1 << 6);
+ break;
+ case 1:
+ PORTB &= ~(1 << 6);
+ break;
+ case 2:
+ PORTF &= ~(1 << 5);
+ break;
+ case 3:
+ PORTB &= ~(1 << 4);
+ break;
+ case 4:
+ PORTC &= ~(1 << 7);
+ break;
+ case 5:
+ PORTF &= ~(1 << 7);
+ break;
+ }
+ }
+}
+
+void led_init_ports()
+{
+ // Switch #1
+ DDRD |= (1 << 6);
+ PORTD &= ~(1 << 6);
+
+ // Switch #2
+ DDRB |= (1 << 6);
+ PORTB &= ~(1 << 6);
+
+ // Switch #3
+ DDRF |= (1 << 5);
+ PORTF &= ~(1 << 5);
+
+ // Switch #4
+ DDRB |= (1 << 4);
+ PORTB &= ~(1 << 4);
+
+ // Switch #5
+ DDRC |= (1 << 7);
+ PORTC &= ~(1 << 7);
+
+ // Switch #6
+ DDRF |= (1 << 7);
+ PORTF &= ~(1 << 7);
+}
+
+void led_set_layer(int layer)
+{
+
+ /*KNOPS_SIMPLELED_STATES*/
+}
+
+void matrix_init_user(void)
+{
+ led_init_ports();
+
+ led_set_layer(0);
+
+ /*KNOPS_INIT*/
+}
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+ //keyevent_t event = record->event;
+
+ /*KNOPS_MACRO*/
+ return NULL;
+}
+
+void matrix_scan_user(void)
+{
+ /*KNOPS_SCAN*/
+}
+
+void led_set_user(uint8_t usb_led)
+{
+
+ /*KNOPS_FUNCTIONALLED_STATES*/
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record)
+{
+
+ /*KNOPS_PROCESS_STATE*/
+ return NULL;
+}
--- /dev/null
+# Default Knops Mini Layout
+
+
+
+
+
+This is the keymap that our configurator uses to compile new keymaps and features. Here is a screenshot:
+
+
+
+As of 12th of february 2018, this tool has not yet been released to the public. You may have a look at our older tool, KBFlasher: [our (almost outdated) configurator tool](http://knops.io/configurator.html) for this.
\ No newline at end of file
--- /dev/null
+# krusli's RAMA M6-A Layout
+
+Personal keymap for the RAMA M6-A.
+
+Keymap was from my own port for the M6-A before official support was added, thus the backlighting code is not ported yet from the official default keymap.
+
+Top-right button acts as a "toggle between layers" button. Layer 0 -> Layer 1 -> Layer 2 -> Layer 0 -> ...
+
+* Layer 0: Git and Discord shortcuts
+* Layer 1: Media playback and volume controls
+* Layer 2: Osu! gamepad layer
+
+## Helpful alternative keymaps (WIP)
+
+### Arrow cluster
+
+Use [karabiner-elements](https://github.com/tekezo/Karabiner-Elements) on macOS so that the state of the modifiers (shift, caps lock) are synchronised between keyboards (for shift + arrow key text selection, for example). It's also a handy tool for customising keyboard behaviour on a Mac.
+
+On Windows/Linux modifier state should be shared between all keyboards by default.
+
+Installation: install [homebrew](https://brew.sh) and run `brew install Caskroom/cask/karabiner-elements`.
+
+```C
+LAYOUT(
+ KC_ESC, KC_UP, TO(_LAYER0),
+ KC_LEFT, KC_DOWN, KC_RIGHT
+)
+```
--- /dev/null
+#include QMK_KEYBOARD_H
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+
+enum layers
+{
+ _LAYER0,
+ _LAYER1,
+ _LAYER2
+};
+
+enum custom_keycodes
+{
+ GIT_ADD = SAFE_RANGE,
+ GIT_COMMIT,
+ GIT_PUSH,
+ MUTE,
+ DEAFEN
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record)
+{
+ if (record->event.pressed)
+ {
+ switch (keycode)
+ {
+ case GIT_ADD:
+ SEND_STRING("git add ." SS_TAP(X_ENTER));
+ break;
+ case GIT_COMMIT:
+ SEND_STRING("git commit -m " SS_DOWN(X_LSHIFT) SS_TAP(X_QUOTE) SS_UP(X_LSHIFT));
+ break;
+ case GIT_PUSH:
+ SEND_STRING("git push" SS_TAP(X_ENTER));
+ break;
+ case MUTE:
+ SEND_STRING(SS_LGUI(SS_LSFT("M")));
+ break;
+ case DEAFEN:
+ SEND_STRING(SS_LGUI(SS_LSFT("D")));
+ break;
+ return false;
+ }
+ }
+ return true;
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [_LAYER0] = LAYOUT(
+ MUTE, DEAFEN, TO(_LAYER1),
+ GIT_ADD, GIT_COMMIT, GIT_PUSH),
+ [_LAYER1] = LAYOUT(
+ KC_VOLD, KC_VOLU, TO(_LAYER2),
+ KC_MRWD, KC_MPLY, KC_MNXT),
+ [_LAYER2] = LAYOUT(
+ KC_ESC, KC_UP, TO(_LAYER0),
+ KC_Z, KC_X, KC_SPACE)};
+
+void matrix_init_user(void)
+{
+#ifdef BACKLIGHT_ENABLE
+ backlight_level(0);
+#endif
+}
--- /dev/null
+/* Copyright 2018 Wilba
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// place overrides here
+
+#endif
\ No newline at end of file
--- /dev/null
+#include QMK_KEYBOARD_H
+
+// Define Layers
+#define _BASE 0
+#define _FNX 1
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ // Base Layer
+ [_BASE] = LAYOUT(
+ TO(1), KC_UP, KC_PGDN,
+ KC_LEFT, KC_DOWN, KC_RGHT),
+
+ // Fn Layer
+ [_FNX] = LAYOUT(
+ TO(0), KC_VOLU, KC_MPLY,
+ KC_MRWD, KC_VOLD, KC_MFFD)};
\ No newline at end of file
--- /dev/null
+Naut's Keymap
+=======
+
+Arrows for HHKB and Media keys for M65-A.
+
+Keymap Maintainer: [Jason Barnachea](https://github.com/nautxx)
+
+Difference from base layout: Similar.
+
+Intended usage: Arrows and Media Keys.
--- /dev/null
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
--- /dev/null
+/* Copyright 2018 Wilba
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "quantum.h"
+
+#ifndef RAMA_M6_A_H
+#define RAMA_M6_A_H
+
+// This a shortcut to help you visually see your layout.
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+#define LAYOUT( \
+ K00, K01, K02, K03, K04, K05) \
+ { \
+ {K00, K01, K02, K03, K04, K05}, \
+ }
+#endif // RAMA_M6_A
--- /dev/null
+# RAMA WORKS M6-A
+
+
+
+A 6-key companion keyboard. [More info at RAMA WORKS](https://rama.works/m6a)
+
+Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582)
+Hardware Supported: RAMA WORKS M6-A PCB
+Hardware Availability: [RAMA WORKS Store](https://ramaworks.store/)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make wilba_tech/rama_works_m6_a:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file
--- /dev/null
+# project specific files
+SRC = keyboards/wilba_tech/wt_main.c
+
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Boot Section
+BOOTLOADER = atmel-dfu
+
+# Do not put the microcontroller into power saving mode
+# when we get USB suspend event. We want it to keep updating
+# backlight effects.
+OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no # Audio output on port C6
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+
+RAW_ENABLE = yes
+DYNAMIC_KEYMAP_ENABLE = yes
+CIE1931_CURVE = no
+
--- /dev/null
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0x5241 // "RW"
+#define PRODUCT_ID 0x006B // 6-B
+#define DEVICE_VER 0x0001
+#define MANUFACTURER RAMA WORKS
+#define PRODUCT RAMA WORKS M6-B
+#define DESCRIPTION RAMA WORKS M6-B
+
+/* key matrix size */
+#define MATRIX_ROWS 1
+#define MATRIX_COLS 6
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { E6 }
+#define MATRIX_COL_PINS { D4, B5, F4, D7, C6, F6 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+#define RGB_BACKLIGHT_ENABLED 1
+
+// This conditionally compiles the backlight code for M6-B specifics
+#define RGB_BACKLIGHT_M6_B
+
+// enable/disable LEDs based on layout
+#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0
+#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0
+#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0
+#define RGB_BACKLIGHT_USE_7U_SPACEBAR 0
+#define RGB_BACKLIGHT_USE_ISO_ENTER 0
+#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0
+
+// disable backlight when USB suspended (PC sleep/hibernate/shutdown)
+#define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0
+
+// disable backlight after timeout in minutes, 0 = no timeout
+#define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0
+
+// the default brightness
+#define RGB_BACKLIGHT_BRIGHTNESS 255
+
+// the default effect (RGB test)
+#define RGB_BACKLIGHT_EFFECT 255
+
+// the default effect speed (0-3)
+#define RGB_BACKLIGHT_EFFECT_SPEED 0
+
+// the default color1 and color2
+#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 }
+#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 }
+
+// These define which keys in the matrix are alphas/mods
+// Used for backlight effects so colors are different for
+// alphas vs. mods
+// Each value is for a row, bit 0 is column 0
+// Alpha=0 Mod=1
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0
+
+#define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+#define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+#define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+#define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+
+#define DYNAMIC_KEYMAP_LAYER_COUNT 4
+
+// EEPROM usage
+
+// TODO: refactor with new user EEPROM code (coming soon)
+#define EEPROM_MAGIC 0x451F
+#define EEPROM_MAGIC_ADDR 32
+// Bump this every time we change what we store
+// This will automatically reset the EEPROM with defaults
+// and avoid loading invalid data from the EEPROM
+#define EEPROM_VERSION 0x08
+#define EEPROM_VERSION_ADDR 34
+
+// Backlight config starts after EEPROM version
+#define RGB_BACKLIGHT_CONFIG_EEPROM_ADDR 35
+// Dynamic keymap starts after backlight config (35+43)
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 78
+// Dynamic macro starts after dynamic keymaps (78+(4*6*2)) = (78+48)
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 126
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 898
+#define DYNAMIC_KEYMAP_MACRO_COUNT 16
--- /dev/null
+{
+ "keyboard_name": "RAMA WORKS M6-B",
+ "url": "http://rama.works",
+ "maintainer": "Wilba",
+ "width": 3,
+ "height": 2,
+ "layouts": {
+ "LAYOUT": {
+ "layout": [
+ { "x": 0, "y": 0 },
+ { "x": 1, "y": 0 },
+ { "x": 2, "y": 0 },
+ { "x": 0, "y": 1 },
+ { "x": 1, "y": 1 },
+ { "x": 2, "y": 1 }
+ ]
+ }
+ }
+}
--- /dev/null
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ LAYOUT(
+ KC_1, KC_2, KC_3, KC_4, KC_5, KC_6),
+
+ LAYOUT(
+ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO),
+
+ LAYOUT(
+ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO),
+
+ LAYOUT(
+ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO) };
+
--- /dev/null
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef RGB_BACKLIGHT_M6_B
+#error RGB_BACKLIGHT_M6_B not defined, you done goofed somehao, brah
+#endif
--- /dev/null
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+// This a shortcut to help you visually see your layout.
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+#define LAYOUT( \
+ K00, K01, K02, K03, K04, K05) \
+ { \
+ {K00, K01, K02, K03, K04, K05}, \
+ }
+
--- /dev/null
+# RAMA WORKS M6-B
+
+
+
+A 6-key companion keyboard. [More info at RAMA WORKS](https://rama.works/m6a)
+
+Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582)
+Hardware Supported: RAMA WORKS M6-B PCB
+Hardware Availability: [RAMA WORKS Store](https://ramaworks.store/)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make wilba_tech/rama_works_m6_b:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file
--- /dev/null
+# project specific files
+SRC = keyboards/wilba_tech/wt_main.c \
+ keyboards/wilba_tech/wt_rgb_backlight.c \
+ quantum/color.c \
+ drivers/issi/is31fl3218.c \
+ drivers/avr/i2c_master.c
+
+
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Boot Section
+BOOTLOADER = atmel-dfu
+
+# Do not put the microcontroller into power saving mode
+# when we get USB suspend event. We want it to keep updating
+# backlight effects.
+OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no # Audio output on port C6
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+
+RAW_ENABLE = yes
+DYNAMIC_KEYMAP_ENABLE = yes
+CIE1931_CURVE = yes
+
--- /dev/null
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0x5241 // "RW"
+#define PRODUCT_ID 0x080A // 80-A
+#define DEVICE_VER 0x0001
+#define MANUFACTURER RAMA WORKS
+#define PRODUCT RAMA WORKS U80-A
+#define DESCRIPTION RAMA WORKS U80-A
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 17
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { F1, F0, E6, F4, F6, F7 }
+#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4, B7, B0 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1 H
+//#define MAGIC_KEY_HELP2 SLASH
+//#define MAGIC_KEY_DEBUG D
+//#define MAGIC_KEY_DEBUG_MATRIX X
+//#define MAGIC_KEY_DEBUG_KBD K
+//#define MAGIC_KEY_DEBUG_MOUSE M
+//#define MAGIC_KEY_VERSION V
+//#define MAGIC_KEY_STATUS S
+//#define MAGIC_KEY_CONSOLE C
+//#define MAGIC_KEY_LAYER0_ALT1 ESC
+//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
+//#define MAGIC_KEY_LAYER0 0
+//#define MAGIC_KEY_LAYER1 1
+//#define MAGIC_KEY_LAYER2 2
+//#define MAGIC_KEY_LAYER3 3
+//#define MAGIC_KEY_LAYER4 4
+//#define MAGIC_KEY_LAYER5 5
+//#define MAGIC_KEY_LAYER6 6
+//#define MAGIC_KEY_LAYER7 7
+//#define MAGIC_KEY_LAYER8 8
+//#define MAGIC_KEY_LAYER9 9
+//#define MAGIC_KEY_BOOTLOADER PAUSE
+//#define MAGIC_KEY_LOCK CAPS
+//#define MAGIC_KEY_EEPROM E
+//#define MAGIC_KEY_NKRO N
+//#define MAGIC_KEY_SLEEP_LED Z
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+ - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+ - MIDI notes can be added to the keymap
+ - Octave shift and transpose
+ - Virtual sustain, portamento, and modulation wheel
+ - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+//#define WT_MONO_BACKLIGHT
+
+// IS31FL3731 driver
+#define DRIVER_COUNT 3
+#define DRIVER_LED_TOTAL 108
+
+#define RGB_BACKLIGHT_ENABLED 1
+
+// This conditionally compiles the backlight code for U80-A specifics
+#define RGB_BACKLIGHT_U80_A
+
+// enable/disable LEDs based on layout
+// they aren't really used if RGB_BACKLIGHT_M60_A defined
+#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 1
+#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0
+#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 1
+#define RGB_BACKLIGHT_USE_7U_SPACEBAR 1
+#define RGB_BACKLIGHT_USE_ISO_ENTER 0
+#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 1
+
+// disable backlight when USB suspended (PC sleep/hibernate/shutdown)
+#define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0
+
+// disable backlight after timeout in minutes, 0 = no timeout
+#define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0
+
+// the default brightness
+#define RGB_BACKLIGHT_BRIGHTNESS 255
+
+// the default effect (RGB test)
+#define RGB_BACKLIGHT_EFFECT 255
+
+// the default effect speed (0-3)
+#define RGB_BACKLIGHT_EFFECT_SPEED 0
+
+// the default color1 and color2
+#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 }
+#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 }
+
+// These define which keys in the matrix are alphas/mods
+// Used for backlight effects so colors are different for
+// alphas vs. mods
+// Each value is for a row, bit 0 is column 0
+// Alpha=0 Mod=1
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0b1110000000000000
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0b1100000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0b1111000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b1111000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b1111100000000111
+
+#define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+#define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+#define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+#define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+
+
+#define DYNAMIC_KEYMAP_LAYER_COUNT 4
+
+// EEPROM usage
+
+// TODO: refactor with new user EEPROM code (coming soon)
+#define EEPROM_MAGIC 0x451F
+#define EEPROM_MAGIC_ADDR 32
+// Bump this every time we change what we store
+// This will automatically reset the EEPROM with defaults
+// and avoid loading invalid data from the EEPROM
+#define EEPROM_VERSION 0x07
+#define EEPROM_VERSION_ADDR 34
+
+// Backlight config starts after EEPROM version
+#define RGB_BACKLIGHT_CONFIG_EEPROM_ADDR 35
+// Dynamic keymap starts after backlight config (35+31)
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 66
+// Dynamic macro starts after dynamic keymaps (66+(4*6*17*2)) = (66+816)
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 882
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 142
+#define DYNAMIC_KEYMAP_MACRO_COUNT 16
--- /dev/null
+{
+ "keyboard_name": "RAMA WORKS U80-A",
+ "url": "http://rama.works",
+ "maintainer": "Wilba",
+ "bootloader": "atmel-dfu",
+ "width": 18.25,
+ "height": 6.5,
+ "layouts": {
+ "LAYOUT_all": {
+ "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5}, {"x":14, "y":1.5}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"Shift", "x":0, "y":4.5, "w":2.25}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":1.75}, {"x":14, "y":4.5}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}]
+ }
+ }
+}
--- /dev/null
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ [0] = LAYOUT_all(
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS,
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP,
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
+
+ [1] = LAYOUT_all(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, EF_DEC, EF_INC, H1_DEC, H1_INC, H2_DEC, H2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BR_DEC, BR_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, S1_DEC, S1_INC, S2_DEC, S2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, ES_DEC, ES_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+ [2] = LAYOUT_all(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+ [3] = LAYOUT_all(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
+};
+
--- /dev/null
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+// Nothing to see here, move along... ;-)
--- /dev/null
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+#include "keyboards/wilba_tech/wt_rgb_backlight_keycodes.h"
+#include "keyboards/wilba_tech/via_keycodes.h"
+
+#define ____ KC_NO
+
+// Right switch of split backspace is at 3,13 and is the only switch
+// whose physical position doesn't match switch matrix position :-(
+// However, it also makes no sense to view the physical as 18 columns,
+// so the numbering goes 00 to 16. Deal with it.
+
+#define LAYOUT_all( \
+ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K015, K016, \
+ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, \
+ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, \
+ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, \
+ K400, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K415, \
+ K500, K501, K502, K507, K511, K512, K513, K514, K515, K516 \
+) { \
+ { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, ____, K014, K015, K016 }, \
+ { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116 }, \
+ { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216 }, \
+ { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, ____, ____, ____, ____ }, \
+ { K400, ____, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, ____, ____, K415, ____ }, \
+ { K500, K501, K502, ____, ____, ____, ____, K507, ____, ____, ____, K511, K512, K513, K514, K515, K516 } \
+}
+
--- /dev/null
+# RAMA WORKS U80-A
+
+
+
+A TKL keyboard. [More info at RAMA WORKS](https://rama.works/#/tkl-a/)
+
+Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582)
+Hardware Supported: RAMA WORKS U80-A PCB
+Hardware Availability: [RAMA WORKS Store](https://ramaworks.store/)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make wilba_tech/rama_works_u80_a:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file
--- /dev/null
+# project specific files
+SRC = keyboards/wilba_tech/wt_main.c \
+ keyboards/wilba_tech/wt_rgb_backlight.c \
+ quantum/color.c \
+ drivers/issi/is31fl3731.c \
+ drivers/avr/i2c_master.c
+
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section
+BOOTLOADER = atmel-dfu
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6
+FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
+
+RAW_ENABLE = yes
+DYNAMIC_KEYMAP_ENABLE = yes
+CIE1931_CURVE = yes
--- /dev/null
+/* Copyright 2017 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#define PROTOCOL_VERSION 0x0008
+
+enum via_command_id
+{
+ id_get_protocol_version = 0x01, // always 0x01
+ id_get_keyboard_value,
+ id_set_keyboard_value,
+ id_dynamic_keymap_get_keycode,
+ id_dynamic_keymap_set_keycode,
+ id_dynamic_keymap_reset,
+ id_backlight_config_set_value,
+ id_backlight_config_get_value,
+ id_backlight_config_save,
+ id_eeprom_reset,
+ id_bootloader_jump,
+ id_dynamic_keymap_macro_get_count,
+ id_dynamic_keymap_macro_get_buffer_size,
+ id_dynamic_keymap_macro_get_buffer,
+ id_dynamic_keymap_macro_set_buffer,
+ id_dynamic_keymap_macro_reset,
+ id_dynamic_keymap_get_layer_count,
+ id_dynamic_keymap_get_buffer,
+ id_dynamic_keymap_set_buffer,
+ id_unhandled = 0xFF,
+};
+
+enum via_keyboard_value_id
+{
+ id_uptime = 0x01,
+ id_firmware_version
+};
+
--- /dev/null
+/* Copyright 2017 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+// Can't use SAFE_RANGE here, it might change if someone adds
+// new values to enum quantum_keycodes.
+// Need to keep checking 0x5F10 is still in the safe range.
+// TODO: merge this into quantum_keycodes
+// Backlight keycodes are in range 0x5F00-0x5F0F
+enum via_keycodes {
+ FN_MO13 = 0x5F10,
+ FN_MO23,
+ MACRO00,
+ MACRO01,
+ MACRO02,
+ MACRO03,
+ MACRO04,
+ MACRO05,
+ MACRO06,
+ MACRO07,
+ MACRO08,
+ MACRO09,
+ MACRO10,
+ MACRO11,
+ MACRO12,
+ MACRO13,
+ MACRO14,
+ MACRO15,
+};
+
+enum user_keycodes {
+ USER00 = 0x5F80,
+ USER01,
+ USER02,
+ USER03,
+ USER04,
+ USER05,
+ USER06,
+ USER07,
+ USER08,
+ USER09,
+ USER10,
+ USER11,
+ USER12,
+ USER13,
+ USER14,
+ USER15,
+};
+
+// VIA specific "action functions", introduced with Zeal60
+// These are only valid IDs in action_function()
+// Use FN_TT13, FN_TT23, etc. in keymaps
+enum via_action_functions {
+ TRIPLE_TAP_1_3 = 0x31,
+ TRIPLE_TAP_2_3 = 0x32
+};
+
+// Bitwise OR the above with 0x0F00 to use in F(x) macro
+// This reserves the top 256 of the 4096 range of F(x) keycodes,
+// leaving the rest for use in fn_actions[] or actions in EEPROM.
+#define FN_TT13 F((0x0F00|TRIPLE_TAP_1_3))
+#define FN_TT23 F((0x0F00|TRIPLE_TAP_2_3))
+
+#define TG_NKRO MAGIC_TOGGLE_NKRO
*/
#include "quantum.h"
+
+// Check that no backlight functions are called
+#if RGB_BACKLIGHT_ENABLED
+#include "keyboards/wilba_tech/wt_rgb_backlight.h"
+#endif // RGB_BACKLIGHT_ENABLED
#ifdef WT_MONO_BACKLIGHT
#include "keyboards/wilba_tech/wt_mono_backlight.h"
-#endif
-#include "keyboards/zeal60/zeal60_api.h" // Temporary hack
-#include "keyboards/zeal60/zeal60_keycodes.h" // Temporary hack
+#endif // WT_MONO_BACKLIGHT
+#include "keyboards/wilba_tech/via_api.h" // Temporary hack
+#include "keyboards/wilba_tech/via_keycodes.h" // Temporary hack
#include "raw_hid.h"
#include "dynamic_keymap.h"
break;
}
#endif // DYNAMIC_KEYMAP_ENABLE
+#if RGB_BACKLIGHT_ENABLED
+ case id_backlight_config_set_value:
+ {
+ backlight_config_set_value(command_data);
+ break;
+ }
+ case id_backlight_config_get_value:
+ {
+ backlight_config_get_value(command_data);
+ break;
+ }
+ case id_backlight_config_save:
+ {
+ backlight_config_save();
+ break;
+ }
+#endif // RGB_BACKLIGHT_ENABLED
case id_eeprom_reset:
{
eeprom_reset();
// If the EEPROM has the magic, the data is good.
// OK to load from EEPROM.
if (eeprom_is_valid()) {
- //backlight_config_load();
+#if RGB_BACKLIGHT_ENABLED
+ backlight_config_load();
+#endif // RGB_BACKLIGHT_ENABLED
} else {
+#if RGB_BACKLIGHT_ENABLED
// If the EEPROM has not been saved before, or is out of date,
// save the default values to the EEPROM. Default values
// come from construction of the zeal_backlight_config instance.
- //backlight_config_save();
+ backlight_config_save();
+#endif // RGB_BACKLIGHT_ENABLED
#ifdef DYNAMIC_KEYMAP_ENABLE
// This resets the keymaps in EEPROM to what is in flash.
dynamic_keymap_reset();
// This resets the macros in EEPROM to nothing.
dynamic_keymap_macro_reset();
-#endif
+#endif // DYNAMIC_KEYMAP_ENABLE
// Save the magic number last, in case saving was interrupted
eeprom_set_valid(true);
}
+
+#if RGB_BACKLIGHT_ENABLED
+ // Initialize LED drivers for backlight.
+ backlight_init_drivers();
+ backlight_timer_init();
+ backlight_timer_enable();
+#endif // RGB_BACKLIGHT_ENABLED
#ifdef WT_MONO_BACKLIGHT
// Initialize LED drivers for backlight.
backlight_init_drivers();
backlight_timer_init();
backlight_timer_enable();
-#endif
+#endif // WT_MONO_BACKLIGHT
}
void bootmagic_lite(void)
void matrix_scan_kb(void)
{
+#if RGB_BACKLIGHT_ENABLED
+ // This only updates the LED driver buffers if something has changed.
+ backlight_update_pwm_buffers();
+#endif // RGB_BACKLIGHT_ENABLED
#ifdef WT_MONO_BACKLIGHT
// This only updates the LED driver buffers if something has changed.
backlight_update_pwm_buffers();
bool process_record_kb(uint16_t keycode, keyrecord_t *record)
{
+#if RGB_BACKLIGHT_ENABLED
+ process_record_backlight(keycode, record);
+#endif // RGB_BACKLIGHT_ENABLED
+
switch(keycode) {
case FN_MO13:
if (record->event.pressed) {
return process_record_user(keycode, record);
}
+
+// This overrides the one in quantum/keymap_common.c
+uint16_t keymap_function_id_to_action( uint16_t function_id )
+{
+ // Zeal60 specific "action functions" are 0xF00 to 0xFFF
+ // i.e. F(0xF00) to F(0xFFF) are mapped to
+ // enum zeal60_action_functions by masking last 8 bits.
+ if ( function_id >= 0x0F00 && function_id <= 0x0FFF )
+ {
+ uint8_t id = function_id & 0xFF;
+ switch ( id ) {
+ case TRIPLE_TAP_1_3:
+ case TRIPLE_TAP_2_3:
+ {
+ return ACTION_FUNCTION_TAP(id);
+ break;
+ }
+ default:
+ break;
+ }
+ }
+
+ return pgm_read_word(&fn_actions[function_id]);
+}
+
+
+// Zeal60 specific "action functions"
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+ switch (id)
+ {
+ case TRIPLE_TAP_1_3:
+ case TRIPLE_TAP_2_3:
+ if (record->event.pressed) {
+ layer_on( id == TRIPLE_TAP_1_3 ? 1 : 2 );
+ if (record->tap.count && !record->tap.interrupted) {
+ if (record->tap.count >= 3) {
+ layer_invert(3);
+ }
+ } else {
+ record->tap.count = 0;
+ }
+ } else {
+ layer_off( id == TRIPLE_TAP_1_3 ? 1 : 2 );
+ }
+ break;
+ }
+}
+
+void led_set_kb(uint8_t usb_led)
+{
+#if RGB_BACKLIGHT_ENABLED
+ backlight_set_indicator_state(usb_led);
+#endif // RGB_BACKLIGHT_ENABLED
+}
+
+void suspend_power_down_kb(void)
+{
+#if RGB_BACKLIGHT_ENABLED
+ backlight_set_suspend_state(true);
+#endif // RGB_BACKLIGHT_ENABLED
+}
+
+void suspend_wakeup_init_kb(void)
+{
+#if RGB_BACKLIGHT_ENABLED
+ backlight_set_suspend_state(false);
+#endif // RGB_BACKLIGHT_ENABLED
+}
+
--- /dev/null
+/* Copyright 2017 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#if defined(RGB_BACKLIGHT_ZEAL60) || defined(RGB_BACKLIGHT_ZEAL65) || defined(RGB_BACKLIGHT_M60_A) || defined(RGB_BACKLIGHT_M6_B) || defined(RGB_BACKLIGHT_KOYU) || defined(RGB_BACKLIGHT_HS60) || defined(RGB_BACKLIGHT_NK65) || defined(RGB_BACKLIGHT_U80_A)
+#else
+#error None of the following was defined: RGB_BACKLIGHT_ZEAL60, RGB_BACKLIGHT_ZEAL65, RGB_BACKLIGHT_M60_A, RGB_BACKLIGHT_M6_B, RGB_BACKLIGHT_KOYU, RGB_BACKLIGHT_HS60, RGB_BACKLIGHT_NK65, RGB_BACKLIGHT_U80_A
+#endif
+
+#ifndef MAX
+ #define MAX(X, Y) ((X) > (Y) ? (X) : (Y))
+#endif
+
+#ifndef MIN
+ #define MIN(a,b) ((a) < (b)? (a): (b))
+#endif
+
+#include "quantum.h"
+#include "wt_rgb_backlight.h"
+#include "wt_rgb_backlight_api.h"
+#include "wt_rgb_backlight_keycodes.h"
+
+#if !defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65)
+#include <avr/io.h>
+#include <util/delay.h>
+#include <avr/interrupt.h>
+#include "drivers/avr/i2c_master.h"
+#else
+#include "ch.h"
+#include "hal.h"
+#include "drivers/arm/i2c_master.h"
+#include "tmk_core/common/eeprom.h"
+#endif
+#include "progmem.h"
+#include "quantum/color.h"
+
+#if defined(RGB_BACKLIGHT_M6_B)
+#include "drivers/issi/is31fl3218.h"
+#define BACKLIGHT_LED_COUNT 6
+#elif defined(RGB_BACKLIGHT_HS60)
+#include "drivers/issi/is31fl3733.h"
+#define BACKLIGHT_LED_COUNT 64
+#elif defined(RGB_BACKLIGHT_NK65)
+#include "drivers/issi/is31fl3733.h"
+#define BACKLIGHT_LED_COUNT 69
+#else
+#include "drivers/issi/is31fl3731.h"
+#if defined(RGB_BACKLIGHT_U80_A)
+#define BACKLIGHT_LED_COUNT 108
+#else
+#define BACKLIGHT_LED_COUNT 72
+#endif
+#endif
+
+#define BACKLIGHT_EFFECT_MAX 10
+
+backlight_config g_config = {
+ .use_split_backspace = RGB_BACKLIGHT_USE_SPLIT_BACKSPACE,
+ .use_split_left_shift = RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT,
+ .use_split_right_shift = RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT,
+ .use_7u_spacebar = RGB_BACKLIGHT_USE_7U_SPACEBAR,
+ .use_iso_enter = RGB_BACKLIGHT_USE_ISO_ENTER,
+ .disable_hhkb_blocker_leds = RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS,
+ .disable_when_usb_suspended = RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED,
+ .disable_after_timeout = RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT,
+ .brightness = RGB_BACKLIGHT_BRIGHTNESS,
+ .effect = RGB_BACKLIGHT_EFFECT,
+ .effect_speed = RGB_BACKLIGHT_EFFECT_SPEED,
+ .color_1 = RGB_BACKLIGHT_COLOR_1,
+ .color_2 = RGB_BACKLIGHT_COLOR_2,
+ .caps_lock_indicator = RGB_BACKLIGHT_CAPS_LOCK_INDICATOR,
+ .layer_1_indicator = RGB_BACKLIGHT_LAYER_1_INDICATOR,
+ .layer_2_indicator = RGB_BACKLIGHT_LAYER_2_INDICATOR,
+ .layer_3_indicator = RGB_BACKLIGHT_LAYER_3_INDICATOR,
+ .alphas_mods = {
+ RGB_BACKLIGHT_ALPHAS_MODS_ROW_0,
+ RGB_BACKLIGHT_ALPHAS_MODS_ROW_1,
+ RGB_BACKLIGHT_ALPHAS_MODS_ROW_2,
+ RGB_BACKLIGHT_ALPHAS_MODS_ROW_3,
+ RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 },
+#if defined(RGB_BACKLIGHT_M6_B)
+ .custom_color = { { 0, 255 }, { 43, 255 }, { 85, 255 }, { 128, 255 }, { 171, 255 }, { 213, 255 } }
+#endif
+};
+
+bool g_suspend_state = false;
+uint8_t g_indicator_state = 0;
+
+// Global tick at 20 Hz
+uint32_t g_tick = 0;
+
+// Ticks since this key was last hit.
+uint8_t g_key_hit[BACKLIGHT_LED_COUNT];
+
+// Ticks since any key was last hit.
+uint32_t g_any_key_hit = 0;
+
+#if defined(RGB_BACKLIGHT_HS60)
+
+// This is a 7-bit address, that gets left-shifted and bit 0
+// set to 0 for write, 1 for read (as per I2C protocol)
+// ADDR_2 is not needed. it is here as a dummy
+#define ISSI_ADDR_1 0x50
+
+const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
+/* Refer to IS31 manual for these locations
+ * driver
+ * | R location
+ * | | G location
+ * | | | B location
+ * | | | | */
+ {0, B_1, A_1, C_1}, //LA1
+ {0, E_1, D_1, F_1}, //LA2
+ {0, H_1, G_1, I_1}, //LA3
+ {0, K_1, J_1, L_1}, //LA4
+ {0, B_2, A_2, C_2}, //LA5
+ {0, E_2, D_2, F_2}, //LA6
+ {0, H_2, G_2, I_2}, //LA7
+ {0, K_2, J_2, L_2}, //LA8
+ {0, B_3, A_3, C_3}, //LA9
+ {0, E_3, D_3, F_3}, //LA10
+ {0, H_3, G_3, I_3}, //LA11
+ {0, K_3, J_3, L_3}, //LA12
+ {0, B_4, A_4, C_4}, //LA13
+ {0, E_4, D_4, F_4}, //LA14
+ {0, H_4, G_4, I_4}, //LA15
+ {0, K_4, J_4, L_4}, //LA16
+ {0, B_5, A_5, C_5}, //LA17
+ {0, E_5, D_5, F_5}, //LA18
+ {0, H_5, G_5, I_5}, //LA19
+ {0, K_5, J_5, L_5}, //LA20
+ {0, B_6, A_6, C_6}, //LA21
+ {0, E_6, D_6, F_6}, //LA22
+ {0, H_6, G_6, I_6}, //LA23
+ {0, K_6, J_6, L_6}, //LA24
+ {0, B_7, A_7, C_7}, //LA25
+ {0, E_7, D_7, F_7}, //LA26
+ {0, H_7, G_7, I_7}, //LA27
+ {0, K_7, J_7, L_7}, //LA28
+ {0, B_8, A_8, C_8}, //LA29
+ {0, E_8, D_8, F_8}, //LA30
+ {0, H_8, G_8, I_8}, //LA31
+ {0, K_8, J_8, L_8}, //LA32
+ {0, B_9, A_9, C_9}, //LA33
+ {0, E_9, D_9, F_9}, //LA34
+ {0, H_9, G_9, I_9}, //LA35
+ {0, K_9, J_9, L_9}, //LA36
+ {0, B_10, A_10, C_10}, //LA37
+ {0, E_10, D_10, F_10}, //LA38
+ {0, H_10, G_10, I_10}, //LA39
+ {0, K_10, J_10, L_10}, //LA40
+ {0, B_11, A_11, C_11}, //LA41
+ {0, E_11, D_11, F_11}, //LA42
+ {0, H_11, G_11, I_11}, //LA43
+ {0, K_11, J_11, L_11}, //LA44
+ {0, B_12, A_12, C_12}, //LA45
+ {0, E_12, D_12, F_12}, //LA46
+ {0, H_12, G_12, I_12}, //LA47
+ {0, K_12, J_12, L_12}, //LA48
+ {0, B_13, A_13, C_13}, //LA49
+ {0, E_13, D_13, F_13}, //LA50
+ {0, H_13, G_13, I_13}, //LA51
+ {0, K_13, J_13, L_13}, //LA52
+ {0, B_14, A_14, C_14}, //LA53
+ {0, E_14, D_14, F_14}, //LA54
+ {0, H_14, G_14, I_14}, //LA55
+ {0, K_14, J_14, L_14}, //LA56
+ {0, B_15, A_15, C_15}, //LA57
+ {0, E_15, D_15, F_15}, //LA58
+ {0, H_15, G_15, I_15}, //LA59
+ {0, K_15, J_15, L_15}, //LA60
+ {0, B_16, A_16, C_16}, //LA61
+ {0, E_16, D_16, F_16}, //LA62
+ {0, H_16, G_16, I_16}, //LA63
+ {0, K_16, J_16, L_16}, //LA64
+};
+
+#elif defined(RGB_BACKLIGHT_NK65)
+
+// This is a 7-bit address, that gets left-shifted and bit 0
+// set to 0 for write, 1 for read (as per I2C protocol)
+// ADDR_2 is not needed. it is here as a dummy
+#define ISSI_ADDR_1 0x50
+#define ISSI_ADDR_2 0x52
+
+const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
+/* Refer to IS31 manual for these locations
+ * driver
+ * | R location
+ * | | G location
+ * | | | B location
+ * | | | | */
+ {0, B_1, A_1, C_1}, //LA1
+ {0, E_1, D_1, F_1}, //LA2
+ {0, H_1, G_1, I_1}, //LA3
+ {0, K_1, J_1, L_1}, //LA4
+ {0, B_2, A_2, C_2}, //LA5
+ {0, E_2, D_2, F_2}, //LA6
+ {0, H_2, G_2, I_2}, //LA7
+ {0, K_2, J_2, L_2}, //LA8
+ {0, B_3, A_3, C_3}, //LA9
+ {0, E_3, D_3, F_3}, //LA10
+ {0, H_3, G_3, I_3}, //LA11
+ {0, K_3, J_3, L_3}, //LA12
+ {0, B_4, A_4, C_4}, //LA13
+ {0, E_4, D_4, F_4}, //LA14
+ {0, H_4, G_4, I_4}, //LA15
+ {0, K_4, J_4, L_4}, //LA16
+ {0, B_5, A_5, C_5}, //LA17
+ {0, E_5, D_5, F_5}, //LA18
+ {0, H_5, G_5, I_5}, //LA19
+ {0, K_5, J_5, L_5}, //LA20
+ {0, B_6, A_6, C_6}, //LA21
+ {0, E_6, D_6, F_6}, //LA22
+ {0, H_6, G_6, I_6}, //LA23
+ {0, K_6, J_6, L_6}, //LA24
+ {0, B_7, A_7, C_7}, //LA25
+ {0, E_7, D_7, F_7}, //LA26
+ {0, H_7, G_7, I_7}, //LA27
+ {0, K_7, J_7, L_7}, //LA28
+ {0, B_8, A_8, C_8}, //LA29
+ {0, E_8, D_8, F_8}, //LA30
+ {0, H_8, G_8, I_8}, //LA31
+ {0, K_8, J_8, L_8}, //LA32
+ {0, B_9, A_9, C_9}, //LA33
+ {0, E_9, D_9, F_9}, //LA34
+ {0, H_9, G_9, I_9}, //LA35
+ {0, K_9, J_9, L_9}, //LA36
+ {0, B_10, A_10, C_10}, //LA37
+ {0, E_10, D_10, F_10}, //LA38
+ {0, H_10, G_10, I_10}, //LA39
+ {0, K_10, J_10, L_10}, //LA40
+ {0, B_11, A_11, C_11}, //LA41
+ {0, E_11, D_11, F_11}, //LA42
+ {0, H_11, G_11, I_11}, //LA43
+ {0, K_11, J_11, L_11}, //LA44
+ {0, B_12, A_12, C_12}, //LA45
+ {0, E_12, D_12, F_12}, //LA46
+ {0, H_12, G_12, I_12}, //LA47
+ {0, K_12, J_12, L_12}, //LA48
+ {0, B_13, A_13, C_13}, //LA49
+ {0, E_13, D_13, F_13}, //LA50
+ {0, H_13, G_13, I_13}, //LA51
+ {0, K_13, J_13, L_13}, //LA52
+ {0, B_14, A_14, C_14}, //LA53
+ {0, E_14, D_14, F_14}, //LA54
+ {0, H_14, G_14, I_14}, //LA55
+ {0, K_14, J_14, L_14}, //LA56
+ {0, B_15, A_15, C_15}, //LA57
+ {0, E_15, D_15, F_15}, //LA58
+ {0, H_15, G_15, I_15}, //LA59
+ {0, K_15, J_15, L_15}, //LA60
+ {0, B_16, A_16, C_16}, //LA61
+ {0, E_16, D_16, F_16}, //LA62
+ {0, H_16, G_16, I_16}, //LA63
+ {0, K_16, J_16, L_16}, //LA64
+
+ {1, B_1, A_1, C_1}, //LB1
+ {1, E_1, D_1, F_1}, //LB2
+ {1, H_1, G_1, I_1}, //LB3
+ {1, K_1, J_1, L_1}, //LB4
+ {1, B_2, A_2, C_2}, //LB5
+ {1, E_2, D_2, F_2}, //LB6
+ {1, H_2, G_2, I_2}, //LB7
+ {1, K_2, J_2, L_2}, //LB8
+ {1, B_3, A_3, C_3}, //LB9
+ {1, E_3, D_3, F_3}, //LB10
+ {1, H_3, G_3, I_3}, //LB11
+ {1, K_3, J_3, L_3}, //LB12
+ {1, B_4, A_4, C_4}, //LB13
+ {1, E_4, D_4, F_4}, //LB14
+ {1, H_4, G_4, I_4}, //LB15
+ {1, K_4, J_4, L_4}, //LB16
+ {1, B_5, A_5, C_5}, //LB17
+ {1, E_5, D_5, F_5}, //LB18
+ {1, H_5, G_5, I_5}, //LB19
+ {1, K_5, J_5, L_5}, //LB20
+ {1, B_6, A_6, C_6}, //LB21
+ {1, E_6, D_6, F_6}, //LB22
+ {1, H_6, G_6, I_6}, //LB23
+ {1, K_6, J_6, L_6}, //LB24
+ {1, B_7, A_7, C_7}, //LB25
+ {1, E_7, D_7, F_7}, //LB26
+ {1, H_7, G_7, I_7}, //LB27
+ {1, K_7, J_7, L_7}, //LB28
+ {1, B_8, A_8, C_8}, //LB29
+ {1, E_8, D_8, F_8}, //LB30
+ {1, H_8, G_8, I_8}, //LB31
+ {1, K_8, J_8, L_8}, //LB32
+ {1, B_9, A_9, C_9}, //LB33
+ {1, E_9, D_9, F_9}, //LB34
+ {1, H_9, G_9, I_9}, //LB35
+ {1, K_9, J_9, L_9}, //LB36
+ {1, B_10, A_10, C_10}, //LB37
+ {1, E_10, D_10, F_10}, //LB38
+ {1, H_10, G_10, I_10}, //LB39
+ {1, K_10, J_10, L_10}, //LB40
+ {1, B_11, A_11, C_11}, //LB41
+ {1, E_11, D_11, F_11}, //LB42
+ {1, H_11, G_11, I_11}, //LB43
+ {1, K_11, J_11, L_11}, //LB44
+ {1, B_12, A_12, C_12}, //LB45
+ {1, E_12, D_12, F_12}, //LB46
+ {1, H_12, G_12, I_12}, //LB47
+ {1, K_12, J_12, L_12}, //LB48
+ {1, B_13, A_13, C_13}, //LB49
+ {1, E_13, D_13, F_13}, //LB50
+ {1, H_13, G_13, I_13}, //LB51
+ {1, K_13, J_13, L_13}, //LB52
+ {1, B_14, A_14, C_14}, //LB53
+ {1, E_14, D_14, F_14}, //LB54
+ {1, H_14, G_14, I_14}, //LB55
+ {1, K_14, J_14, L_14}, //LB56
+ {1, B_15, A_15, C_15}, //LB57
+ {1, E_15, D_15, F_15}, //LB58
+ {1, H_15, G_15, I_15}, //LB59
+ {1, K_15, J_15, L_15}, //LB60
+ {1, B_16, A_16, C_16}, //LB61
+ {1, E_16, D_16, F_16}, //LB62
+ {1, H_16, G_16, I_16}, //LB63
+ {1, K_16, J_16, L_16}, //LB64
+};
+
+#elif defined(RGB_BACKLIGHT_U80_A)
+
+// U80-A prototype uses 3 ISSI drivers
+#define ISSI_ADDR_1 0x74 // 11101[00] <- GND
+#define ISSI_ADDR_2 0x76 // 11101[10] <- SDA
+#define ISSI_ADDR_3 0x75 // 11101[01] <- SCL
+
+const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
+/* Refer to IS31 manual for these locations
+ * driver
+ * | R location
+ * | | G location
+ * | | | B location
+ * | | | | */
+ {0, C2_1, C3_1, C4_1}, // LA0
+ {0, C1_1, C3_2, C4_2}, // LA1
+ {0, C1_2, C2_2, C4_3}, // LA2
+ {0, C1_3, C2_3, C3_3}, // LA3
+ {0, C1_4, C2_4, C3_4}, // LA4
+ {0, C1_5, C2_5, C3_5}, // LA5
+ {0, C1_6, C2_6, C3_6}, // LA6
+ {0, C1_7, C2_7, C3_7}, // LA7
+ {0, C1_8, C2_8, C3_8}, // LA8
+ {0, C9_1, C8_1, C7_1}, // LA9
+ {0, C9_2, C8_2, C7_2}, // LA10
+ {0, C9_3, C8_3, C7_3}, // LA11
+ {0, C9_4, C8_4, C7_4}, // LA12
+ {0, C9_5, C8_5, C7_5}, // LA13
+ {0, C9_6, C8_6, C7_6}, // LA14
+ {0, C9_7, C8_7, C6_6}, // LA15
+ {0, C9_8, C7_7, C6_7}, // LA16
+ {0, C8_8, C7_8, C6_8}, // LA17
+
+ {0, C2_9, C3_9, C4_9}, // LB0
+ {0, C1_9, C3_10, C4_10}, // LB1
+ {0, C1_10, C2_10, C4_11}, // LB2
+ {0, C1_11, C2_11, C3_11}, // LB3
+ {0, C1_12, C2_12, C3_12}, // LB4
+ {0, C1_13, C2_13, C3_13}, // LB5
+ {0, C1_14, C2_14, C3_14}, // LB6
+ {0, C1_15, C2_15, C3_15}, // LB7
+ {0, C1_16, C2_16, C3_16}, // LB8
+ {0, C9_9, C8_9, C7_9}, // LB9
+ {0, C9_10, C8_10, C7_10}, // LB10
+ {0, C9_11, C8_11, C7_11}, // LB11
+ {0, C9_12, C8_12, C7_12}, // LB12
+ {0, C9_13, C8_13, C7_13}, // LB13
+ {0, C9_14, C8_14, C7_14}, // LB14
+ {0, C9_15, C8_15, C6_14}, // LB15
+ {0, C9_16, C7_15, C6_15}, // LB16
+ {0, C8_16, C7_16, C6_16}, // LB17
+
+ {1, C2_1, C3_1, C4_1}, // LC0
+ {1, C1_1, C3_2, C4_2}, // LC1
+ {1, C1_2, C2_2, C4_3}, // LC2
+ {1, C1_3, C2_3, C3_3}, // LC3
+ {1, C1_4, C2_4, C3_4}, // LC4
+ {1, C1_5, C2_5, C3_5}, // LC5
+ {1, C1_6, C2_6, C3_6}, // LC6
+ {1, C1_7, C2_7, C3_7}, // LC7
+ {1, C1_8, C2_8, C3_8}, // LC8
+ {1, C9_1, C8_1, C7_1}, // LC9
+ {1, C9_2, C8_2, C7_2}, // LC10
+ {1, C9_3, C8_3, C7_3}, // LC11
+ {1, C9_4, C8_4, C7_4}, // LC12
+ {1, C9_5, C8_5, C7_5}, // LC13
+ {1, C9_6, C8_6, C7_6}, // LC14
+ {1, C9_7, C8_7, C6_6}, // LC15
+ {1, C9_8, C7_7, C6_7}, // LC16
+ {1, C8_8, C7_8, C6_8}, // LC17
+
+ {1, C2_9, C3_9, C4_9}, // LD0
+ {1, C1_9, C3_10, C4_10}, // LD1
+ {1, C1_10, C2_10, C4_11}, // LD2
+ {1, C1_11, C2_11, C3_11}, // LD3
+ {1, C1_12, C2_12, C3_12}, // LD4
+ {1, C1_13, C2_13, C3_13}, // LD5
+ {1, C1_14, C2_14, C3_14}, // LD6
+ {1, C1_15, C2_15, C3_15}, // LD7
+ {1, C1_16, C2_16, C3_16}, // LD8
+ {1, C9_9, C8_9, C7_9}, // LD9
+ {1, C9_10, C8_10, C7_10}, // LD10
+ {1, C9_11, C8_11, C7_11}, // LD11
+ {1, C9_12, C8_12, C7_12}, // LD12
+ {1, C9_13, C8_13, C7_13}, // LD13
+ {1, C9_14, C8_14, C7_14}, // LD14
+ {1, C9_15, C8_15, C6_14}, // LD15
+ {1, C9_16, C7_15, C6_15}, // LD16
+ {1, C8_16, C7_16, C6_16}, // LD17
+
+ {2, C2_1, C3_1, C4_1}, // LE0
+ {2, C1_1, C3_2, C4_2}, // LE1
+ {2, C1_2, C2_2, C4_3}, // LE2
+ {2, C1_3, C2_3, C3_3}, // LE3
+ {2, C1_4, C2_4, C3_4}, // LE4
+ {2, C1_5, C2_5, C3_5}, // LE5
+ {2, C1_6, C2_6, C3_6}, // LE6
+ {2, C1_7, C2_7, C3_7}, // LE7
+ {2, C1_8, C2_8, C3_8}, // LE8
+ {2, C9_1, C8_1, C7_1}, // LE9
+ {2, C9_2, C8_2, C7_2}, // LE10
+ {2, C9_3, C8_3, C7_3}, // LE11
+ {2, C9_4, C8_4, C7_4}, // LE12
+ {2, C9_5, C8_5, C7_5}, // LE13
+ {2, C9_6, C8_6, C7_6}, // LE14
+ {2, C9_7, C8_7, C6_6}, // LE15
+ {2, C9_8, C7_7, C6_7}, // LE16
+ {2, C8_8, C7_8, C6_8}, // LE17
+
+ {2, C2_9, C3_9, C4_9}, // LF0
+ {2, C1_9, C3_10, C4_10}, // LF1
+ {2, C1_10, C2_10, C4_11}, // LF2
+ {2, C1_11, C2_11, C3_11}, // LF3
+ {2, C1_12, C2_12, C3_12}, // LF4
+ {2, C1_13, C2_13, C3_13}, // LF5
+ {2, C1_14, C2_14, C3_14}, // LF6
+ {2, C1_15, C2_15, C3_15}, // LF7
+ {2, C1_16, C2_16, C3_16}, // LF8
+ {2, C9_9, C8_9, C7_9}, // LF9
+ {2, C9_10, C8_10, C7_10}, // LF10
+ {2, C9_11, C8_11, C7_11}, // LF11
+ {2, C9_12, C8_12, C7_12}, // LF12
+ {2, C9_13, C8_13, C7_13}, // LF13
+ {2, C9_14, C8_14, C7_14}, // LF14
+ {2, C9_15, C8_15, C6_14}, // LF15
+ {2, C9_16, C7_15, C6_15}, // LF16
+ {2, C8_16, C7_16, C6_16}, // LF17
+};
+#elif !defined(RGB_BACKLIGHT_M6_B)
+// This is a 7-bit address, that gets left-shifted and bit 0
+// set to 0 for write, 1 for read (as per I2C protocol)
+#define ISSI_ADDR_1 0x74
+#define ISSI_ADDR_2 0x76
+
+const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
+/* Refer to IS31 manual for these locations
+ * driver
+ * | R location
+ * | | G location
+ * | | | B location
+ * | | | | */
+ {0, C2_1, C3_1, C4_1}, // LA0
+ {0, C1_1, C3_2, C4_2}, // LA1
+ {0, C1_2, C2_2, C4_3}, // LA2
+ {0, C1_3, C2_3, C3_3}, // LA3
+ {0, C1_4, C2_4, C3_4}, // LA4
+ {0, C1_5, C2_5, C3_5}, // LA5
+ {0, C1_6, C2_6, C3_6}, // LA6
+ {0, C1_7, C2_7, C3_7}, // LA7
+ {0, C1_8, C2_8, C3_8}, // LA8
+ {0, C9_1, C8_1, C7_1}, // LA9
+ {0, C9_2, C8_2, C7_2}, // LA10
+ {0, C9_3, C8_3, C7_3}, // LA11
+ {0, C9_4, C8_4, C7_4}, // LA12
+ {0, C9_5, C8_5, C7_5}, // LA13
+ {0, C9_6, C8_6, C7_6}, // LA14
+ {0, C9_7, C8_7, C6_6}, // LA15
+ {0, C9_8, C7_7, C6_7}, // LA16
+ {0, C8_8, C7_8, C6_8}, // LA17
+
+ {0, C2_9, C3_9, C4_9}, // LB0
+ {0, C1_9, C3_10, C4_10}, // LB1
+ {0, C1_10, C2_10, C4_11}, // LB2
+ {0, C1_11, C2_11, C3_11}, // LB3
+ {0, C1_12, C2_12, C3_12}, // LB4
+ {0, C1_13, C2_13, C3_13}, // LB5
+ {0, C1_14, C2_14, C3_14}, // LB6
+ {0, C1_15, C2_15, C3_15}, // LB7
+ {0, C1_16, C2_16, C3_16}, // LB8
+ {0, C9_9, C8_9, C7_9}, // LB9
+ {0, C9_10, C8_10, C7_10}, // LB10
+ {0, C9_11, C8_11, C7_11}, // LB11
+ {0, C9_12, C8_12, C7_12}, // LB12
+ {0, C9_13, C8_13, C7_13}, // LB13
+ {0, C9_14, C8_14, C7_14}, // LB14
+ {0, C9_15, C8_15, C6_14}, // LB15
+ {0, C9_16, C7_15, C6_15}, // LB16
+ {0, C8_16, C7_16, C6_16}, // LB17
+
+ {1, C2_1, C3_1, C4_1}, // LC0
+ {1, C1_1, C3_2, C4_2}, // LC1
+ {1, C1_2, C2_2, C4_3}, // LC2
+ {1, C1_3, C2_3, C3_3}, // LC3
+ {1, C1_4, C2_4, C3_4}, // LC4
+ {1, C1_5, C2_5, C3_5}, // LC5
+ {1, C1_6, C2_6, C3_6}, // LC6
+ {1, C1_7, C2_7, C3_7}, // LC7
+ {1, C1_8, C2_8, C3_8}, // LC8
+ {1, C9_1, C8_1, C7_1}, // LC9
+ {1, C9_2, C8_2, C7_2}, // LC10
+ {1, C9_3, C8_3, C7_3}, // LC11
+ {1, C9_4, C8_4, C7_4}, // LC12
+ {1, C9_5, C8_5, C7_5}, // LC13
+ {1, C9_6, C8_6, C7_6}, // LC14
+ {1, C9_7, C8_7, C6_6}, // LC15
+ {1, C9_8, C7_7, C6_7}, // LC16
+ {1, C8_8, C7_8, C6_8}, // LC17
+
+ {1, C2_9, C3_9, C4_9}, // LD0
+ {1, C1_9, C3_10, C4_10}, // LD1
+ {1, C1_10, C2_10, C4_11}, // LD2
+ {1, C1_11, C2_11, C3_11}, // LD3
+ {1, C1_12, C2_12, C3_12}, // LD4
+ {1, C1_13, C2_13, C3_13}, // LD5
+ {1, C1_14, C2_14, C3_14}, // LD6
+ {1, C1_15, C2_15, C3_15}, // LD7
+ {1, C1_16, C2_16, C3_16}, // LD8
+ {1, C9_9, C8_9, C7_9}, // LD9
+ {1, C9_10, C8_10, C7_10}, // LD10
+ {1, C9_11, C8_11, C7_11}, // LD11
+ {1, C9_12, C8_12, C7_12}, // LD12
+ {1, C9_13, C8_13, C7_13}, // LD13
+ {1, C9_14, C8_14, C7_14}, // LD14
+ {1, C9_15, C8_15, C6_14}, // LD15
+ {1, C9_16, C7_15, C6_15}, // LD16
+ {1, C8_16, C7_16, C6_16}, // LD17
+};
+#endif // !defined(RGB_BACKLIGHT_M6_B)
+
+
+typedef struct Point {
+ uint8_t x;
+ uint8_t y;
+} Point;
+
+
+// index in range 0..71 (LA0..LA17, LB0..LB17, LC0..LC17, LD0..LD17)
+// point values in range x=0..224 y=0..64
+// origin is center of top-left key (i.e Esc)
+#if defined(RGB_BACKLIGHT_ZEAL65)
+const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = {
+ // LA0..LA17
+ {120,16}, {104,16}, {88,16}, {72,16}, {56,16}, {40,16}, {24,16}, {4,16}, {4,32},
+ {128,0}, {112,0}, {96,0}, {80,0}, {64,0}, {48,0}, {32,0}, {16,0}, {0,0},
+ // LB0..LB17
+ {144,0}, {160,0}, {176,0}, {192,0}, {216,0}, {224,0}, {240,0}, {240,16}, {240,32},
+ {136,16}, {152,16}, {168,16}, {184,16}, {200,16}, {220,16}, {240,48}, {240,64}, {224,64},
+ // LC0..LC17
+ {96,64}, {100,48}, {84,48}, {68,48}, {52,48}, {36,48}, {255,255}, {48,60}, {28,64},
+ {108,32}, {92,32}, {76,32}, {60,32}, {44,32}, {28,32}, {20,44}, {10,48}, {4,64},
+ // LD0..LD17
+ {124,32}, {140,32}, {156,32}, {172,32}, {188,32}, {214,32}, {180,48}, {202,48}, {224,48},
+ {116,48}, {132,48}, {148,48}, {164,48}, {255,255}, {144,60}, {164,64}, {188,64}, {208,64}
+};
+const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = {
+ // LA0..LA17
+ {64,128}, {75,132}, {84,145}, {91,164}, {97,187}, {102,213}, {105,242}, {109,255}, {128,243},
+ {61,255}, {67,255}, {72,255}, {77,255}, {82,255}, {86,255}, {90,255}, {93,255}, {96,255},
+ // LB0..LB17
+ {56,255}, {51,255}, {46,255}, {42,255}, {37,255}, {35,255}, {32,255}, {19,255}, {0,255},
+ {53,132}, {44,145}, {37,164}, {31,187}, {26,213}, {22,249}, {237,255}, {224,255}, {221,255},
+ // LC0..LC17
+ {184,255}, {179,135}, {170,149}, {163,169}, {157,193}, {153,220}, {255,255}, {167,255}, {165,255},
+ {128,26}, {128,60}, {128,94}, {128,128}, {128,162}, {128,196}, {145,233}, {148,255}, {161,255},
+ // LD0..LD17
+ {0,9}, {0,43}, {0,77}, {0,111}, {0,145}, {0,201}, {224,181}, {230,217}, {235,255},
+ {189,128}, {200,131}, {210,141}, {218,159}, {255,255}, {201,228}, {206,255}, {213,255}, {218,255}
+};
+#elif defined(RGB_BACKLIGHT_KOYU)
+const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = {
+ // LA0..LA17
+ {120,16}, {104,16}, {88,16}, {72,16}, {56,16}, {40,16}, {24,16}, {4,16}, {4,32},
+ {128,0}, {112,0}, {96,0}, {80,0}, {64,0}, {48,0}, {32,0}, {16,0}, {0,0},
+ // LB0..LB17
+ {144,0}, {160,0}, {176,0}, {192,0}, {208,0}, {224,0}, {240,0}, {240,16}, {240,32},
+ {136,16}, {152,16}, {168,16}, {184,16}, {200,16}, {220,16}, {240,48}, {240,64}, {224,64},
+ // LC0..LC17
+ {112,64}, {100,48}, {84,48}, {68,48}, {52,48}, {36,48}, {64,60}, {44,60}, {24,64},
+ {108,32}, {92,32}, {76,32}, {60,32}, {44,32}, {28,32}, {255,255}, {10,48}, {4,64},
+ // LD0..LD17
+ {124,32}, {140,32}, {156,32}, {172,32}, {188,32}, {214,32}, {180,48}, {202,48}, {224,48},
+ {116,48}, {132,48}, {148,48}, {164,48}, {255,255}, {160,60}, {180,64}, {208,64}, {255,255}
+};
+const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = {
+ // LA0..LA17
+ {64,128}, {75,132}, {84,145}, {91,164}, {97,187}, {102,213}, {105,242}, {109,255}, {128,243},
+ {61,255}, {67,255}, {72,255}, {77,255}, {82,255}, {86,255}, {90,255}, {93,255}, {96,255},
+ // LB0..LB17
+ {56,255}, {51,255}, {46,255}, {42,255}, {38,255}, {35,255}, {32,255}, {19,255}, {0,255},
+ {53,132}, {44,145}, {37,164}, {31,187}, {26,213}, {22,249}, {237,255}, {224,255}, {221,255},
+ // LC0..LC17
+ {189,255}, {179,135}, {170,149}, {163,169}, {157,193}, {153,220}, {172,252}, {169,255}, {165,255},
+ {128,26}, {128,60}, {128,94}, {128,128}, {128,162}, {128,196}, {255,255}, {148,255}, {161,255},
+ // LD0..LD17
+ {0,9}, {0,43}, {0,77}, {0,111}, {0,145}, {0,201}, {224,181}, {230,217}, {235,255},
+ {189,128}, {200,131}, {210,141}, {218,159}, {255,255}, {207,238}, {211,255}, {218,255}, {255,255}
+};
+#elif defined(RGB_BACKLIGHT_ZEAL60) || defined(RGB_BACKLIGHT_M60_A)
+const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = {
+ // LA0..LA17
+ {120,16}, {104,16}, {88,16}, {72,16}, {56,16}, {40,16}, {24,16}, {4,16}, {4,32},
+ {128,0}, {112,0}, {96,0}, {80,0}, {64,0}, {48,0}, {32,0}, {16,0}, {0,0},
+ // LB0..LB17
+ {144,0}, {160,0}, {176,0}, {192,0}, {216,0}, {224,0}, {255,255}, {255,255}, {255,255},
+ {136,16}, {152,16}, {168,16}, {184,16}, {200,16}, {220,16}, {255,255}, {255,255}, {255,255},
+ // LC0..LC17
+ {102,64}, {100,48}, {84,48}, {68,48}, {52,48}, {36,48}, {60,64}, {43,64}, {23,64},
+ {108,32}, {92,32}, {76,32}, {60,32}, {44,32}, {28,32}, {20,48}, {2,48}, {3,64},
+ // LD0..LD17
+ {124,32}, {140,32}, {156,32}, {172,32}, {188,32}, {214,32}, {180,48}, {210,48}, {224,48},
+ {116,48}, {132,48}, {148,48}, {164,48}, {144,64}, {161,64}, {181,64}, {201,64}, {221,64}
+};
+const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = {
+ // LA0..LA17
+ {58,129}, {70,129}, {80,139}, {89,157}, {96,181}, {101,208}, {105,238}, {109,255}, {128,247},
+ {58,255}, {64,255}, {70,255}, {75,255}, {80,255}, {85,255}, {89,255}, {93,255}, {96,255},
+ // LB0..LB17
+ {53,255}, {48,255}, {43,255}, {39,255}, {34,255}, {32,255}, {255,255}, {255,255}, {255,255},
+ {48,139}, {39,157}, {32,181}, {27,208}, {23,238}, {19,255}, {255,255}, {255,255}, {255,255},
+ // LC0..LC17
+ {188,255}, {183,131}, {173,143}, {165,163}, {159,188}, {154,216}, {172,252}, {170,255}, {165,255},
+ {128,9}, {128,46}, {128,82}, {128,119}, {128,155}, {128,192}, {150,244}, {147,255}, {161,255},
+ // LD0..LD17
+ {0,27}, {0,64}, {0,101}, {0,137}, {0,174}, {255,233}, {228,201}, {235,255}, {237,255},
+ {195,128}, {206,136}, {215,152}, {222,175}, {205,234}, {209,255}, {214,255}, {219,255}, {223,255}
+};
+#elif defined(RGB_BACKLIGHT_U80_A)
+const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = {
+ // Thse are scaled by 14.5 per U
+ // LA0..LA17
+ {109,36}, {94,36}, {80,36}, {65,36}, {51,36}, {36,36}, {22,36}, {4,36}, {5,51},
+ {116,22}, {102,22}, {87,22}, {73,22}, {58,22}, {44,22}, {29,22}, {15,22}, {0,22},
+ // LB0..LB17
+ {131,22}, {145,22}, {160,22}, {174,22}, {196,22}, {0,0}, {0,0}, {0,0}, {0,0},
+ {123,36}, {138,36}, {152,36}, {167,36}, {181,36}, {199,36}, {0,0}, {0,0}, {0,0},
+ // LC0..LC17
+ {102,80}, {91,65}, {76,65}, {62,65}, {47,65}, {33,65}, {58,76}, {40,80}, {22,80},
+ {98,51}, {83,51}, {69,51}, {54,51}, {40,51}, {25,51}, {0,0}, {9,65}, {4,80},
+ // LD0..LD17
+ {112,51}, {127,51}, {141,51}, {156,51}, {170,51}, {194,51}, {163,65}, {190,65}, {0,0},
+ {105,65}, {120,65}, {134,65}, {149,65}, {0,0}, {145,76}, {163,80}, {181,80}, {199,80},
+ // LE0..LE17
+ {0,0}, {0,0}, {0,0}, {0,0}, {0,0}, {0,0}, {0,0}, {0,0}, {0,0},
+ {73,0}, {94,0}, {109,0}, {123,0}, {138,0}, {58,0}, {44,0}, {29,0}, {0,0},
+ // LF0..LF17
+ {160,0}, {174,0}, {189,0}, {203,0}, {225,0}, {239,0}, {254,0}, {254,22}, {254,36},
+ {239,22}, {239,36}, {225,22}, {225,36}, {0,0}, {239,65}, {225,80}, {239,80}, {254,80}
+};
+const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = {
+ // LA0..LA17
+ {59,129}, {69,129}, {80,138}, {88,154}, {95,175}, {100,200}, {104,227}, {107,255}, {128,226},
+ {59,255}, {64,255}, {69,255}, {75,255}, {80,255}, {84,255}, {88,255}, {91,255}, {95,255},
+ // LB0..LB17
+ {53,255}, {48,255}, {44,255}, {40,255}, {35,255}, {255,255}, {255,255}, {255,255}, {255,255},
+ {48,138}, {40,154}, {33,175}, {28,200}, {24,227}, {21,255}, {255,255}, {255,255}, {255,255},
+ // LC0..LC17
+ {192,255}, {184,131}, {174,141}, {166,159}, {160,181}, {155,207}, {174,244}, {171,255}, {166,255},
+ {128,9}, {128,43}, {128,77}, {128,111}, {128,145}, {128,179}, {255,255}, {150,252}, {162,255},
+ // LD0..LD17
+ {0,26}, {0,60}, {0,94}, {0,128}, {0,162}, {0,218}, {227,193}, {234,245}, {255,255},
+ {195,128}, {205,135}, {214,149}, {221,169}, {255,255}, {210,244}, {213,255}, {218,255}, {222,255},
+ // LE0..LE17
+ {255,255}, {255,255}, {255,255}, {255,255}, {255,255}, {255,255}, {255,255}, {255,255}, {255,255},
+ {70,255}, {66,255}, {62,255}, {59,255}, {56,255}, {73,255}, {76,255}, {79,255}, {84,255},
+ // LF0..LF17
+ {52,255}, {49,255}, {47,255}, {44,255}, {41,255}, {38,255}, {37,255}, {25,255}, {14,255},
+ {27,255}, {15,255}, {29,255}, {17,255}, {255,255}, {241,255}, {227,255}, {229,255}, {231,255}
+};
+#elif defined(RGB_BACKLIGHT_HS60) && defined(HS60_ANSI)
+const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = {
+ // LA1..LA47
+ {0,0}, {4,16}, {6,32}, {10,48}, {16,0}, {24,16}, {28,32}, {36,48}, {32,0}, {40,16}, {44,32}, {52,48},
+ {48,0}, {56,16}, {60,32}, {68,48}, {64,0}, {72,16}, {76,32}, {84,48}, {80,0}, {88,16}, {92,32}, {100,48},
+ {96,0}, {104,16}, {108,32}, {116,48}, {112,0}, {120,16}, {124,32}, {132,48}, {128,0}, {136,16}, {140,32},
+ {148,48}, {144,0}, {152,16}, {156,32}, {164,48}, {160,0}, {168,16}, {172,32}, {180,48}, {176,0}, {184, 16}, {188,32},
+ {255,255},// LA48 does not exist, dummy
+ // LA49..LA50
+ {192,0}, {200,16},
+ {255,255},// LA51 does not exit, dummy
+ // LA52..LA60
+ {210,48}, {216,0}, {220,16}, {214,32}, {222,64}, {2,64}, {22,64}, {42,64}, {102,64},
+ {255,255},// LA61 does not exit, dummy
+ {162,64}, {182,64}, {202,64}
+};
+const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = {
+ // LA1..LA47
+ {96,255}, {109,255}, {128,242}, {148,255}, {93,255}, {105,238}, {128,192}, {154,216}, {89,255}, {101,208}, {128,155}, {159,188},
+ {85,255}, {96,181}, {128,119}, {165,163}, {81,255}, {89,157}, {128,82}, {173,143}, {75,255}, {81,139}, {128,46}, {183,131},
+ {70,255}, {70,129}, {129,9}, {195,128}, {64,255}, {58,129}, {255,27}, {206,136}, {58,255}, {47,139}, {255,64}, {215,152},
+ {53,255}, {39,157}, {255,101}, {222,175}, {47,255}, {32,181}, {255,137}, {228,201}, {43,255}, {27,208}, {255, 174},
+ {255,255},// LA48 does not exist, dummy
+ // LA49..LA50
+ {39,255}, {23,238},
+ {255,255},// LA51 does not exit, dummy
+ // LA52..LA60
+ {235,255}, {33,255}, {19,255}, {255,233}, {224,255}, {160,255}, {164,255}, {169,255}, {188,255},
+ {255,255},// LA61 does not exit, dummy
+ {209,255}, {215,255}, {220,255}
+};
+#elif defined(RGB_BACKLIGHT_HS60) && defined(HS60_HHKB)
+const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = {
+ // LA1..LA60
+ {0,0}, {4,16}, {6,32}, {10,48}, {16,0}, {24,16}, {28,32}, {36,48}, {32,0}, {40,16}, {44,32}, {52,48},
+ {48,0}, {56,16}, {60,32}, {68,48}, {64,0}, {72,16}, {76,32}, {84,48}, {80,0}, {88,16}, {92,32}, {100,48},
+ {96,0}, {104,16}, {108,32}, {116,48}, {112,0}, {120,16}, {124,32}, {132,48}, {128,0}, {136,16}, {140,32},
+ {148,48}, {144,0}, {152,16}, {156,32}, {164,48}, {160,0}, {168,16}, {172,32}, {180,48}, {176,0}, {184, 16}, {188,32},
+ {224,0}, {192,0}, {200,16}, {202,48}, {224,48}, {208,0}, {220,16}, {214,32}, {220,64}, {4,64}, {24,64}, {44,64}, {112,64},
+ {255,255}, {255,255}, // LA61..LA62 does not exit, dummy
+ // LA63..LA64
+ {180,64}, {200,64}
+};
+const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = {
+ // LA1..LA60
+ {96,255}, {109,255}, {128,242}, {148,255}, {93,255}, {105,238}, {128,192}, {154,216}, {89,255}, {101,208}, {128,155}, {159,188},
+ {85,255}, {96,181}, {128,119}, {165,163}, {81,255}, {89,157}, {128,82}, {173,143}, {75,255}, {81,139}, {128,46}, {183,131},
+ {70,255}, {70,129}, {129,9}, {195,128}, {64,255}, {58,129}, {255,27}, {206,136}, {58,255}, {47,139}, {255,64}, {215,152},
+ {53,255}, {39,157}, {255,101}, {222,175}, {47,255}, {32,181}, {255,137}, {228,201}, {43,255}, {27,208}, {255, 174}, {32,255},
+ {39,255}, {23,238}, {233,242}, {237,255}, {35,255}, {19,255}, {255,233}, {223,255}, {161,255}, {165,255}, {170,255}, {192,255},
+ {255,255}, {255,255}, // LA61..LA62 does not exit, dummy
+ // LA63..LA64
+ {214,255}, {219,255}
+};
+#elif defined(RGB_BACKLIGHT_HS60) //HS60_ISO
+const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = {
+ // LA1..LA50
+ {0,0}, {4,16}, {6,32}, {2,48}, {16,0}, {24,16}, {28,32}, {36,48}, {32,0}, {40,16}, {44,32}, {52,48}, {48,0},
+ {56,16}, {60,32}, {68,48}, {64,0}, {72,16}, {76,32}, {84,48}, {80,0}, {88,16}, {92,32}, {100,48}, {96,0}, {104,16},
+ {108,32}, {116,48}, {112,0}, {120,16}, {124,32}, {132,48}, {128,0}, {136,16}, {140,32}, {148,48}, {144,0}, {152,16},
+ {156,32}, {164,48}, {160,0}, {168,16}, {172,32}, {180,48}, {176,0}, {184, 16}, {188,32}, {20,48}, {192,0}, {200,16},
+ {255,255},// LA51 does not exit, dummy
+ // LA52..LA60
+ {210,48}, {216,0}, {220,16}, {222,24}, {222,64}, {2,64}, {22,64}, {42,64}, {102,64},
+ {255,255},// LA61 does not exit, dummy
+ {162,64}, {182,64}, {202,64}
+};
+const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = {
+ // LA1..LA50
+ {96,255}, {109,255}, {128,242}, {147,255}, {93,255}, {105,238}, {128,192}, {154,216}, {89,255}, {101,208}, {128,155}, {159,188}, {85,255},
+ {96,181}, {128,119}, {165,163}, {81,255}, {89,157}, {128,82}, {173,143}, {75,255}, {81,139}, {128,46}, {183,131}, {70,255}, {70,129},
+ {129,9}, {195,128}, {64,255}, {58,129}, {255,27}, {206,136}, {58,255}, {47,139}, {255,64}, {215,152}, {53,255}, {39,157}, {255,101},
+ {222,175}, {47,255}, {32,181}, {255,137}, {228,201}, {43,255}, {27,208}, {255, 174}, {150,246}, {39,255}, {23,238},
+ {255,255},// LA51 does not exit, dummy
+ // LA52..LA60
+ {235,255}, {33,255}, {19,255}, {10,255}, {224,255}, {160,255}, {164,255}, {169,255}, {188,255},
+ {255,255},// LA61 does not exit, dummy
+ {209,255}, {215,255}, {220,255}
+};
+#elif defined(RGB_BACKLIGHT_NK65)
+const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = {
+ // LA1..LA60
+ {0,0}, {4,16}, {6,32}, {10,48}, {16,0}, {24,16}, {28,32}, {36,48}, {32,0}, {40,16}, {44,32}, {52,48},
+ {48,0}, {56,16}, {60,32}, {68,48}, {64,0}, {72,16}, {76,32}, {84,48}, {80,0}, {88,16}, {92,32}, {100,48},
+ {96,0}, {104,16}, {108,32}, {116,48}, {112,0}, {120,16}, {124,32}, {132,48}, {128,0}, {136,16}, {140,32},
+ {148,48}, {144,0}, {152,16}, {156,32}, {164,48}, {160,0}, {168,16}, {172,32}, {180,48}, {176,0}, {184, 16}, {188,32},
+ {160,64}, {192,0}, {200,16}, {210,48}, {224,48}, {216,0}, {220,16}, {214,32}, {224,64}, {2,64}, {22,64}, {42,64}, {102,64},
+ {255,255},// LA61 does not exit, dummy
+ //LA62..LB5
+ {176,64}, {192,64}, {208,64}, {240,0}, {240,16}, {240,48}, {240,64}, {240,32}
+};
+const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = {
+ // LA1..LA60
+ {96,255}, {109,255}, {128,242}, {148,255}, {93,255}, {105,238}, {128,192}, {154,216}, {89,255}, {101,208}, {128,155}, {159,188},
+ {85,255}, {96,181}, {128,119}, {165,163}, {81,255}, {89,157}, {128,82}, {173,143}, {75,255}, {81,139}, {128,46}, {183,131},
+ {70,255}, {70,129}, {129,9}, {195,128}, {64,255}, {58,129}, {255,27}, {206,136}, {58,255}, {47,139}, {255,64}, {215,152},
+ {53,255}, {39,157}, {255,101}, {222,175}, {47,255}, {32,181}, {255,137}, {228,201}, {43,255}, {27,208}, {255, 174},
+ {208,255}, {39,255}, {23,238}, {235,255}, {235,255}, {33,255}, {19,255}, {255,233}, {224,255}, {160,255}, {164,255}, {169,255}, {188,255},
+ {255,255},// LA61 does not exit, dummy
+ //LA62..LB5
+ {221,255}, {225,255}, {229,255}, {22,255}, {12,255}, {244,255}, {234,255}, {255,255},
+};
+#elif defined(RGB_BACKLIGHT_M6_B)
+// M6-B is really simple:
+// 0 3 5
+// 1 2 4
+const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = {
+ {0,0}, {0,16}, {16,16}, {16,0}, {32,16}, {32,0}
+};
+const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = {
+ {160,255}, {96,255}, {77,255}, {179,255}, {51,255}, {205,255}
+};
+#endif
+
+// This may seem counter-intuitive, but it's quite flexible.
+// For each LED, get it's position to decide what color to make it.
+// This solves the issue of LEDs (and switches) not aligning to a grid,
+// or having a large "bitmap" and sampling them.
+void map_led_to_point( uint8_t index, Point *point )
+{
+ // Slightly messy way to get Point structs out of progmem.
+ uint8_t *addr = (uint8_t*)&g_map_led_to_point[index];
+ point->x = pgm_read_byte(addr);
+ point->y = pgm_read_byte(addr+1);
+
+#if defined(RGB_BACKLIGHT_M6_B) || defined(RGB_BACKLIGHT_HS60) || defined(RGB_BACKLIGHT_NK65)
+ return;
+#endif
+
+ switch (index)
+ {
+ case 18+4: // LB4A
+ if ( g_config.use_split_backspace )
+ point->x -= 8;
+ break;
+#if defined(RGB_BACKLIGHT_ZEAL60)
+ case 18+14: // LB14A
+ if ( g_config.use_iso_enter )
+ point->y += 8; // extremely pedantic
+ break;
+ case 54+5: // LD5A
+ if ( !g_config.use_iso_enter )
+ point->x -= 10;
+ break;
+ case 36+16: // LC16A
+ if ( !g_config.use_split_left_shift )
+ point->x += 8;
+ break;
+#endif
+#if defined(RGB_BACKLIGHT_ZEAL60) || defined(RGB_BACKLIGHT_M60_A)
+ case 36+0: // LC0A
+ if ( g_config.use_7u_spacebar )
+ point->x += 10;
+ break;
+ case 36+6: // LC6A
+ if ( g_config.use_7u_spacebar )
+ point->x += 4;
+ break;
+ case 54+7: // LD7A
+ if ( !g_config.use_split_right_shift )
+ point->x -= 8;
+ break;
+#endif
+ }
+}
+
+void map_led_to_point_polar( uint8_t index, Point *point )
+{
+ // Slightly messy way to get Point structs out of progmem.
+ uint8_t *addr = (uint8_t*)&g_map_led_to_point_polar[index];
+ point->x = pgm_read_byte(addr);
+ point->y = pgm_read_byte(addr+1);
+}
+
+//
+// Maps switch matrix coordinate (row,col) to LED index
+//
+
+
+#if defined(RGB_BACKLIGHT_ZEAL65)
+// Note: Left spacebar stab is at 4,2 (LC7)
+// Right spacebar stab is at 4,9 (D14)
+//
+// A17, A16, A15, A14, A13, A12, A11, A10, A9, B0, B1, B2, B3, B4, B6
+// A7, A6, A5, A4, A3, A2, A1, A0, B9, B10, B11, B12, B13, B14, B7
+// A8, C14, C13, C12, C11, C10, C9, D0, D1, D2, D3, D4, D5, B5, B8
+// C16, C15, C5, C4, C3, C2, C1, D9, D10, D11, D12, D6, D7, D8, B15
+// C17, C8, C7, ---, ---, ---, ---, C0, ---, D14, D15, D16, D17, B17, B16
+const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
+ { 0+17, 0+16, 0+15, 0+14, 0+13, 0+12, 0+11, 0+10, 0+9, 18+0, 18+1, 18+2, 18+3, 18+4, 18+6 },
+ { 0+7, 0+6, 0+5, 0+4, 0+3, 0+2, 0+1, 0+0, 18+9, 18+10, 18+11, 18+12, 18+13, 18+14, 18+7 },
+ { 0+8, 36+14, 36+13, 36+12, 36+11, 36+10, 36+9, 54+0, 54+1, 54+2, 54+3, 54+4, 54+5, 18+5, 18+8 },
+ { 36+16, 36+15, 36+5, 36+4, 36+3, 36+2, 36+1, 54+9, 54+10, 54+11, 54+12, 54+6, 54+7, 54+8, 18+15 },
+ { 36+17, 36+8, 36+7, 255, 255, 255, 255, 36+0, 255, 54+14, 54+15, 54+16, 54+17, 18+17, 18+16 }
+};
+#elif defined(RGB_BACKLIGHT_KOYU)
+// Note: Left spacebar stab is at 4,4 (LC6)
+// Right spacebar stab is at 4,10 (D14)
+//
+// A17, A16, A15, A14, A13, A12, A11, A10, A9, B0, B1, B2, B3, B4, B6
+// A7, A6, A5, A4, A3, A2, A1, A0, B9, B10, B11, B12, B13, B14, B7
+// A8, C14, C13, C12, C11, C10, C9, D0, D1, D2, D3, D4, D5, B5, B8
+// C16, C15, C5, C4, C3, C2, C1, D9, D10, D11, D12, D6, D7, D8, B15
+// C17, C8, C7, C6, ---, ---, ---, C0, ---, ---, D14, D15, D16, B17, B16
+const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
+ { 0+17, 0+16, 0+15, 0+14, 0+13, 0+12, 0+11, 0+10, 0+9, 18+0, 18+1, 18+2, 18+3, 18+4, 18+6 },
+ { 0+7, 0+6, 0+5, 0+4, 0+3, 0+2, 0+1, 0+0, 18+9, 18+10, 18+11, 18+12, 18+13, 18+14, 18+7 },
+ { 0+8, 36+14, 36+13, 36+12, 36+11, 36+10, 36+9, 54+0, 54+1, 54+2, 54+3, 54+4, 54+5, 18+5, 18+8 },
+ { 36+16, 36+15, 36+5, 36+4, 36+3, 36+2, 36+1, 54+9, 54+10, 54+11, 54+12, 54+6, 54+7, 54+8, 18+15 },
+ { 36+17, 36+8, 36+7, 36+6, 255, 255, 255, 36+0, 255, 255, 54+14, 54+15, 54+16, 18+17, 18+16 }
+};
+#elif defined(RGB_BACKLIGHT_ZEAL60) || defined(RGB_BACKLIGHT_M60_A)
+// Note: Left spacebar stab is at 4,3 (LC6)
+// Right spacebar stab is at 4,9 (LD13) or 4,10 (LD14)
+//
+// A17, A16, A15, A14, A13, A12, A11, A10, A9, B0, B1, B2, B3, B4,
+// A7, A6, A5, A4, A3, A2, A1, A0, B9, B10, B11, B12, B13, B14,
+// A8, C14, C13, C12, C11, C10, C9, D0, D1, D2, D3, D4, D5, B5,
+// C16, C15, C5, C4, C3, C2, C1, D9, D10, D11, D12, D6, D7, D8,
+// C17, C8, C7, C6, ---, ---, ---, C0, ---, D13, D14, D15, D16, D17,
+const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
+ { 0+17, 0+16, 0+15, 0+14, 0+13, 0+12, 0+11, 0+10, 0+9, 18+0, 18+1, 18+2, 18+3, 18+4 },
+ { 0+7, 0+6, 0+5, 0+4, 0+3, 0+2, 0+1, 0+0, 18+9, 18+10, 18+11, 18+12, 18+13, 18+14 },
+ { 0+8, 36+14, 36+13, 36+12, 36+11, 36+10, 36+9, 54+0, 54+1, 54+2, 54+3, 54+4, 54+5, 18+5 },
+ { 36+16, 36+15, 36+5, 36+4, 36+3, 36+2, 36+1, 54+9, 54+10, 54+11, 54+12, 54+6, 54+7, 54+8 },
+ { 36+17, 36+8, 36+7, 36+6, 255, 255, 255, 36+0, 255, 54+13, 54+14, 54+15, 54+16, 54+17 }
+};
+#elif defined(RGB_BACKLIGHT_U80_A)
+// Note: Left spacebar stab is at 5,3 (LC6)
+// Right spacebar stab is at 5,10 (LD14)
+const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
+ { 72+17, 72+16, 72+15, 72+14, 72+9, 72+10, 72+11, 72+12, 72+13, 90+0, 90+1, 90+2, 90+3, 255, 90+4, 90+5, 90+6 },
+ { 0+17, 0+16, 0+15, 0+14, 0+13, 0+12, 0+11, 0+10, 0+9, 18+0, 18+1, 18+2, 18+3, 18+4, 90+11, 90+9, 90+7 },
+ { 0+7, 0+6, 0+5, 0+4, 0+3, 0+2, 0+1, 0+0, 18+9, 18+10, 18+11, 18+12, 18+13, 18+14, 90+12, 90+10, 90+8 },
+ { 0+8, 36+14, 36+13, 36+12, 36+11, 36+10, 36+9, 54+0, 54+1, 54+2, 54+3, 54+4, 54+5, 255, 255, 255, 255 },
+ { 36+16, 255, 36+5, 36+4, 36+3, 36+2, 36+1, 54+9, 54+10, 54+11, 54+12, 54+6, 54+7, 255, 255, 90+14, 255 },
+ { 36+17, 36+8, 36+7, 36+6, 255, 255, 255, 36+0, 255, 255, 54+14, 54+15, 54+16, 54+17, 90+15, 90+16, 90+17 }
+};
+#elif defined(RGB_BACKLIGHT_HS60) && defined(HS60_ANSI)
+//
+// LA1, LA5, LA9, LA13, LA17, LA21, LA25, LA29, LA33, LA37, LA41, LA45, LA49, LA53,
+// LA2, LA6, LA10, LA14, LA18, LA22, LA26, LA30, LA34, LA38, LA42, LA46, LA50, ---,
+// LA3, LA7, LA11, LA15, LA19, LA23, LA27, LA31, LA35, LA39, LA43, LA47, LA54, LA55,
+// LA4, ---, LA8, LA12, LA16, LA20, LA24, LA28, LA32, LA36, LA40, LA44, ---, LA52,
+// LA57, LA58, LA59, ---, ---, ---, LA60, ---, ---, ---, LA62, LA63, LA64, LA56
+const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
+ { 1-1, 5-1, 9-1, 13-1, 17-1, 21-1, 25-1, 29-1, 33-1, 37-1, 41-1, 45-1, 49-1, 53-1 },
+ { 2-1, 6-1, 10-1, 14-1, 18-1, 22-1, 26-1, 30-1, 34-1, 38-1, 42-1, 46-1, 50-1, 255 },
+ { 3-1, 7-1, 11-1, 15-1, 19-1, 23-1, 27-1, 31-1, 35-1, 39-1, 43-1, 47-1, 54-1, 55-1 },
+ { 4-1, 255, 8-1, 12-1, 16-1, 20-1, 24-1, 28-1, 32-1, 36-1, 40-1, 44-1, 255, 52-1 },
+ { 57-1, 58-1, 59-1, 255, 255, 255, 60-1, 255, 255, 255, 62-1, 63-1, 64-1, 56-1 }
+};
+#elif defined(RGB_BACKLIGHT_HS60) && defined(HS60_HHKB)
+//
+// LA1, LA5, LA9, LA13, LA17, LA21, LA25, LA29, LA33, LA37, LA41, LA45, LA49, LA53,
+// LA2, LA6, LA10, LA14, LA18, LA22, LA26, LA30, LA34, LA38, LA42, LA46, LA50, LA48,
+// LA3, LA7, LA11, LA15, LA19, LA23, LA27, LA31, LA35, LA39, LA43, LA47, LA54, LA55,
+// LA4, ---, LA8, LA12, LA16, LA20, LA24, LA28, LA32, LA36, LA40, LA44, LA51, LA52,
+// LA57, LA58, LA59, ---, ---, ---, LA60, ---, ---, ---, ---, LA63, LA64, LA56
+const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
+ { 1-1, 5-1, 9-1, 13-1, 17-1, 21-1, 25-1, 29-1, 33-1, 37-1, 41-1, 45-1, 49-1, 53-1 },
+ { 2-1, 6-1, 10-1, 14-1, 18-1, 22-1, 26-1, 30-1, 34-1, 38-1, 42-1, 46-1, 50-1, 48-1 },
+ { 3-1, 7-1, 11-1, 15-1, 19-1, 23-1, 27-1, 31-1, 35-1, 39-1, 43-1, 47-1, 54-1, 55-1 },
+ { 4-1, 255, 8-1, 12-1, 16-1, 20-1, 24-1, 28-1, 32-1, 36-1, 40-1, 44-1, 51-1, 52-1 },
+ { 57-1, 58-1, 59-1, 255, 255, 255, 60-1, 255, 255, 255, 255, 63-1, 64-1, 56-1 }
+};
+#elif defined(RGB_BACKLIGHT_HS60) //HS60_ISO
+//
+// LA1, LA5, LA9, LA13, LA17, LA21, LA25, LA29, LA33, LA37, LA41, LA45, LA49, LA53,
+// LA2, LA6, LA10, LA14, LA18, LA22, LA26, LA30, LA34, LA38, LA42, LA46, LA50, ---,
+// LA3, LA7, LA11, LA15, LA19, LA23, LA27, LA31, LA35, LA39, LA43, LA47, LA54, LA55,
+// LA4, LA48, LA8, LA12, LA16, LA20, LA24, LA28, LA32, LA36, LA40, LA44, ---, LA52,
+// LA57, LA58, LA59, ---, ---, ---, LA60, ---, ---, ---, LA62, LA63, LA64, LA56
+const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
+ { 1-1, 5-1, 9-1, 13-1, 17-1, 21-1, 25-1, 29-1, 33-1, 37-1, 41-1, 45-1, 49-1, 53-1 },
+ { 2-1, 6-1, 10-1, 14-1, 18-1, 22-1, 26-1, 30-1, 34-1, 38-1, 42-1, 46-1, 50-1, 255 },
+ { 3-1, 7-1, 11-1, 15-1, 19-1, 23-1, 27-1, 31-1, 35-1, 39-1, 43-1, 47-1, 54-1, 55-1 },
+ { 4-1, 48-1, 8-1, 12-1, 16-1, 20-1, 24-1, 28-1, 32-1, 36-1, 40-1, 44-1, 255, 52-1 },
+ { 57-1, 58-1, 59-1, 255, 255, 255, 60-1, 255, 255, 255, 62-1, 63-1, 64-1, 56-1 }
+};
+#elif defined(RGB_BACKLIGHT_NK65)
+//
+// LA1, LA5, LA9, LA13, LA17, LA21, LA25, LA29, LA33, LA37, LA41, LA45, LA49, LA53, LB1,
+// LA2, LA6, LA10, LA14, LA18, LA22, LA26, LA30, LA34, LA38, LA42, LA46, LA50, ---, LB2,
+// LA3, LA7, LA11, LA15, LA19, LA23, LA27, LA31, LA35, LA39, LA43, LA47, LA54, LA55, LB5,
+// LA4, ---, LA8, LA12, LA16, LA20, LA24, LA28, LA32, LA36, LA40, LA44, LA51, LA52, LB3,
+// LA57, LA58, LA59, ---, ---, ---, LA60, ---, ---, LA48, LA62, LA63, LA64, LA56, LB4
+const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
+ { 1-1, 5-1, 9-1, 13-1, 17-1, 21-1, 25-1, 29-1, 33-1, 37-1, 41-1, 45-1, 49-1, 53-1, 1+64-1 },
+ { 2-1, 6-1, 10-1, 14-1, 18-1, 22-1, 26-1, 30-1, 34-1, 38-1, 42-1, 46-1, 50-1, 255, 2+64-1 },
+ { 3-1, 7-1, 11-1, 15-1, 19-1, 23-1, 27-1, 31-1, 35-1, 39-1, 43-1, 47-1, 54-1, 55-1, 5+64-1 },
+ { 4-1, 255, 8-1, 12-1, 16-1, 20-1, 24-1, 28-1, 32-1, 36-1, 40-1, 44-1, 51-1, 52-1, 3+64-1 },
+ { 57-1, 58-1, 59-1, 255, 255, 255, 60-1, 255, 255, 48-1, 62-1, 63-1, 64-1, 56-1, 4+64-1 }
+};
+#elif defined(RGB_BACKLIGHT_M6_B)
+// M6-B is really simple:
+// 0 3 5
+// 1 2 4
+const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
+ { 0, 3, 5, 1, 2, 4 }
+};
+#endif
+
+void map_row_column_to_led( uint8_t row, uint8_t column, uint8_t *led )
+{
+ *led = 255;
+ if ( row < MATRIX_ROWS && column < MATRIX_COLS )
+ {
+ *led = pgm_read_byte(&g_map_row_column_to_led[row][column]);
+ }
+}
+
+void backlight_update_pwm_buffers(void)
+{
+#if defined(RGB_BACKLIGHT_M6_B)
+ IS31FL3218_update_pwm_buffers();
+#elif defined(RGB_BACKLIGHT_HS60)
+ IS31FL3733_update_pwm_buffers( ISSI_ADDR_1, 0 );
+ IS31FL3733_update_led_control_registers( ISSI_ADDR_1, 0 );
+#elif defined(RGB_BACKLIGHT_NK65)
+ IS31FL3733_update_pwm_buffers( ISSI_ADDR_1, 0 );
+ IS31FL3733_update_pwm_buffers( ISSI_ADDR_2, 1 );
+ IS31FL3733_update_led_control_registers( ISSI_ADDR_1, 0 );
+ IS31FL3733_update_led_control_registers( ISSI_ADDR_2, 1 );
+#elif defined(RGB_BACKLIGHT_U80_A)
+ static uint8_t driver = 0;
+ switch ( driver )
+ {
+ case 0:
+ IS31FL3731_update_pwm_buffers( ISSI_ADDR_1, 0 );
+ break;
+ case 1:
+ IS31FL3731_update_pwm_buffers( ISSI_ADDR_2, 1 );
+ break;
+ case 2:
+ IS31FL3731_update_pwm_buffers( ISSI_ADDR_3, 2 );
+ break;
+ }
+ if ( ++driver > 2 )
+ {
+ driver = 0;
+ }
+#else
+ IS31FL3731_update_pwm_buffers( ISSI_ADDR_1, 0 );
+ IS31FL3731_update_pwm_buffers( ISSI_ADDR_2, 1 );
+ IS31FL3731_update_led_control_registers( ISSI_ADDR_1, 0 );
+ IS31FL3731_update_led_control_registers( ISSI_ADDR_2, 1 );
+#endif
+}
+
+void backlight_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
+{
+#if defined(RGB_BACKLIGHT_M6_B)
+ IS31FL3218_set_color( index, red, green, blue );
+#elif defined(RGB_BACKLIGHT_HS60) || defined(RGB_BACKLIGHT_NK65)
+ IS31FL3733_set_color( index, red, green, blue );
+#else
+ IS31FL3731_set_color( index, red, green, blue );
+#endif
+}
+
+void backlight_set_color_all( uint8_t red, uint8_t green, uint8_t blue )
+{
+#if defined(RGB_BACKLIGHT_M6_B)
+ IS31FL3218_set_color_all( red, green, blue );
+#elif defined(RGB_BACKLIGHT_HS60) || defined(RGB_BACKLIGHT_NK65)
+ IS31FL3733_set_color_all( red, green, blue );
+#else
+ IS31FL3731_set_color_all( red, green, blue );
+#endif
+}
+
+void backlight_set_key_hit(uint8_t row, uint8_t column)
+{
+ uint8_t led;
+ map_row_column_to_led(row,column,&led);
+ g_key_hit[led] = 0;
+
+ g_any_key_hit = 0;
+}
+
+#if !defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65)
+// This is (F_CPU/1024) / 20 Hz
+// = 15625 Hz / 20 Hz
+// = 781
+#define TIMER3_TOP 781
+
+void backlight_timer_init(void)
+{
+ static uint8_t backlight_timer_is_init = 0;
+ if ( backlight_timer_is_init )
+ {
+ return;
+ }
+ backlight_timer_is_init = 1;
+
+ // Timer 3 setup
+ TCCR3B = _BV(WGM32) | // CTC mode OCR3A as TOP
+ _BV(CS32) | _BV(CS30); // prescale by /1024
+ // Set TOP value
+ uint8_t sreg = SREG;
+ cli();
+
+ OCR3AH = (TIMER3_TOP >> 8) & 0xff;
+ OCR3AL = TIMER3_TOP & 0xff;
+ SREG = sreg;
+}
+
+void backlight_timer_enable(void)
+{
+ TIMSK3 |= _BV(OCIE3A);
+}
+
+void backlight_timer_disable(void)
+{
+ TIMSK3 &= ~_BV(OCIE3A);
+}
+#else //STM32, use GPT with TIM4. Enable in halconf.h
+static void gpt_backlight_timer_task(GPTDriver *gptp);
+// Timer setup at 200Khz, callback at 10k ticks = 20Hz
+static GPTConfig gpt4cfg1 = {
+ .frequency = 200000U,
+ .callback = gpt_backlight_timer_task
+};
+
+void backlight_timer_init(void)
+{
+ gptStart(&GPTD4, &gpt4cfg1);
+}
+
+void backlight_timer_enable(void)
+{
+ gptStartContinuous(&GPTD4, 10000);
+}
+
+void backlight_timer_disable(void)
+{
+ gptStopTimer(&GPTD4);
+}
+#endif //!defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65)
+
+void backlight_set_suspend_state(bool state)
+{
+ g_suspend_state = state;
+}
+
+void backlight_set_indicator_state(uint8_t state)
+{
+ g_indicator_state = state;
+}
+
+void backlight_effect_rgb_test(void)
+{
+ // Mask out bits 4 and 5
+ // This 2-bit value will stay the same for 16 ticks.
+ switch ( (g_tick & 0x30) >> 4 )
+ {
+ case 0:
+ {
+ backlight_set_color_all( 255, 0, 0 );
+ break;
+ }
+ case 1:
+ {
+ backlight_set_color_all( 0, 255, 0 );
+ break;
+ }
+ case 2:
+ {
+ backlight_set_color_all( 0, 0, 255 );
+ break;
+ }
+ case 3:
+ {
+ backlight_set_color_all( 255, 255, 255 );
+ break;
+ }
+ }
+}
+
+#if defined(RGB_DEBUGGING_ONLY)
+// This tests the LEDs
+// Note that it will change the LED control registers
+// in the LED drivers, and leave them in an invalid
+// state for other backlight effects.
+// ONLY USE THIS FOR TESTING LEDS!
+void backlight_effect_single_LED_test(void)
+{
+ static uint8_t color = 0; // 0,1,2 for R,G,B
+ static uint8_t row = 0;
+ static uint8_t column = 0;
+
+ static uint8_t tick = 0;
+ tick++;
+
+ if ( tick > 2 )
+ {
+ tick = 0;
+ column++;
+ }
+ if ( column > 14 )
+ {
+ column = 0;
+ row++;
+ }
+ if ( row > 4 )
+ {
+ row = 0;
+ color++;
+ }
+ if ( color > 2 )
+ {
+ color = 0;
+ }
+
+ uint8_t led;
+ map_row_column_to_led( row, column, &led );
+ backlight_set_color_all( 255, 255, 255 );
+ backlight_test_led( led, color==0, color==1, color==2 );
+}
+#endif // defined(RGB_DEBUGGING_ONLY)
+
+// All LEDs off
+void backlight_effect_all_off(void)
+{
+ backlight_set_color_all( 0, 0, 0 );
+}
+
+// Solid color
+void backlight_effect_solid_color(void)
+{
+ HSV hsv = { .h = g_config.color_1.h, .s = g_config.color_1.s, .v = g_config.brightness };
+ RGB rgb = hsv_to_rgb( hsv );
+ backlight_set_color_all( rgb.r, rgb.g, rgb.b );
+}
+
+// alphas = color1, mods = color2
+void backlight_effect_alphas_mods(void)
+{
+ RGB rgb1 = hsv_to_rgb( (HSV){ .h = g_config.color_1.h, .s = g_config.color_1.s, .v = g_config.brightness } );
+ RGB rgb2 = hsv_to_rgb( (HSV){ .h = g_config.color_2.h, .s = g_config.color_2.s, .v = g_config.brightness } );
+ bool is_alpha = false;
+ for ( int row = 0; row < MATRIX_ROWS; row++ )
+ {
+ for ( int column = 0; column < MATRIX_COLS; column++ )
+ {
+ uint8_t index;
+ map_row_column_to_led( row, column, &index );
+ if ( index < BACKLIGHT_LED_COUNT )
+ {
+#if defined(RGB_BACKLIGHT_U80_A)
+ if ( row == 0 )
+ {
+ is_alpha = ( column < 16 ) && (( 0b1110000111100001 & (1<<column) ) == 0);
+ }
+ else
+ {
+ is_alpha = ( column < 16 ) && (( g_config.alphas_mods[row-1] & (1<<column) ) == 0);
+ }
+#else
+ is_alpha = ( g_config.alphas_mods[row] & (1<<column) ) == 0;
+#endif
+ if ( is_alpha )
+ {
+ backlight_set_color( index, rgb1.r, rgb1.g, rgb1.b );
+ }
+ else
+ {
+ backlight_set_color( index, rgb2.r, rgb2.g, rgb2.b );
+ }
+ }
+ }
+ }
+}
+
+void backlight_effect_gradient_up_down(void)
+{
+ int16_t h1 = g_config.color_1.h;
+ int16_t h2 = g_config.color_2.h;
+ int16_t deltaH = h2 - h1;
+
+ // Take the shortest path between hues
+ if ( deltaH > 127 )
+ {
+ deltaH -= 256;
+ }
+ else if ( deltaH < -127 )
+ {
+ deltaH += 256;
+ }
+ // Divide delta by 4, this gives the delta per row
+ deltaH /= 4;
+
+ int16_t s1 = g_config.color_1.s;
+ int16_t s2 = g_config.color_2.s;
+ int16_t deltaS = ( s2 - s1 ) / 4;
+
+ HSV hsv = { .h = 0, .s = 255, .v = g_config.brightness };
+ RGB rgb;
+ Point point;
+ for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
+ {
+ map_led_to_point( i, &point );
+ // The y range will be 0..64, map this to 0..4
+ uint8_t y = (point.y>>4);
+ // Relies on hue being 8-bit and wrapping
+ hsv.h = g_config.color_1.h + ( deltaH * y );
+ hsv.s = g_config.color_1.s + ( deltaS * y );
+ rgb = hsv_to_rgb( hsv );
+ backlight_set_color( i, rgb.r, rgb.g, rgb.b );
+ }
+}
+
+void backlight_effect_raindrops(bool initialize)
+{
+ int16_t h1 = g_config.color_1.h;
+ int16_t h2 = g_config.color_2.h;
+ int16_t deltaH = h2 - h1;
+ deltaH /= 4;
+
+ // Take the shortest path between hues
+ if ( deltaH > 127 )
+ {
+ deltaH -= 256;
+ }
+ else if ( deltaH < -127 )
+ {
+ deltaH += 256;
+ }
+
+ int16_t s1 = g_config.color_1.s;
+ int16_t s2 = g_config.color_2.s;
+ int16_t deltaS = ( s2 - s1 ) / 4;
+
+ HSV hsv;
+ RGB rgb;
+
+ // Change one LED every tick
+ uint8_t led_to_change = ( g_tick & 0x000 ) == 0 ? rand() % BACKLIGHT_LED_COUNT : 255;
+
+ for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
+ {
+ // If initialize, all get set to random colors
+ // If not, all but one will stay the same as before.
+ if ( initialize || i == led_to_change )
+ {
+ hsv.h = h1 + ( deltaH * ( rand() & 0x03 ) );
+ hsv.s = s1 + ( deltaS * ( rand() & 0x03 ) );
+ // Override brightness with global brightness control
+ hsv.v = g_config.brightness;;
+
+ rgb = hsv_to_rgb( hsv );
+ backlight_set_color( i, rgb.r, rgb.g, rgb.b );
+ }
+ }
+}
+
+void backlight_effect_cycle_all(void)
+{
+ uint8_t offset = ( g_tick << g_config.effect_speed ) & 0xFF;
+
+ // Relies on hue being 8-bit and wrapping
+ for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
+ {
+ uint16_t offset2 = g_key_hit[i]<<2;
+#if !defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65)
+ // stabilizer LEDs use spacebar hits
+ if ( i == 36+6 || i == 54+13 || // LC6, LD13
+ ( g_config.use_7u_spacebar && i == 54+14 ) ) // LD14
+ {
+ offset2 = g_key_hit[36+0]<<2;
+ }
+#endif
+ offset2 = (offset2<=63) ? (63-offset2) : 0;
+
+ HSV hsv = { .h = offset+offset2, .s = 255, .v = g_config.brightness };
+ RGB rgb = hsv_to_rgb( hsv );
+ backlight_set_color( i, rgb.r, rgb.g, rgb.b );
+ }
+}
+
+void backlight_effect_cycle_left_right(void)
+{
+ uint8_t offset = ( g_tick << g_config.effect_speed ) & 0xFF;
+ HSV hsv = { .h = 0, .s = 255, .v = g_config.brightness };
+ RGB rgb;
+ Point point;
+ for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
+ {
+ uint16_t offset2 = g_key_hit[i]<<2;
+#if !defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65)
+ // stabilizer LEDs use spacebar hits
+ if ( i == 36+6 || i == 54+13 || // LC6, LD13
+ ( g_config.use_7u_spacebar && i == 54+14 ) ) // LD14
+ {
+ offset2 = g_key_hit[36+0]<<2;
+ }
+#endif
+ offset2 = (offset2<=63) ? (63-offset2) : 0;
+
+ map_led_to_point( i, &point );
+ // Relies on hue being 8-bit and wrapping
+ hsv.h = point.x + offset + offset2;
+ rgb = hsv_to_rgb( hsv );
+ backlight_set_color( i, rgb.r, rgb.g, rgb.b );
+ }
+}
+
+void backlight_effect_cycle_up_down(void)
+{
+ uint8_t offset = ( g_tick << g_config.effect_speed ) & 0xFF;
+ HSV hsv = { .h = 0, .s = 255, .v = g_config.brightness };
+ RGB rgb;
+ Point point;
+ for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
+ {
+ uint16_t offset2 = g_key_hit[i]<<2;
+#if !defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65)
+ // stabilizer LEDs use spacebar hits
+ if ( i == 36+6 || i == 54+13 || // LC6, LD13
+ ( g_config.use_7u_spacebar && i == 54+14 ) ) // LD14
+ {
+ offset2 = g_key_hit[36+0]<<2;
+ }
+#endif
+ offset2 = (offset2<=63) ? (63-offset2) : 0;
+
+ map_led_to_point( i, &point );
+ // Relies on hue being 8-bit and wrapping
+ hsv.h = point.y + offset + offset2;
+ rgb = hsv_to_rgb( hsv );
+ backlight_set_color( i, rgb.r, rgb.g, rgb.b );
+ }
+}
+
+void backlight_effect_jellybean_raindrops( bool initialize )
+{
+ HSV hsv;
+ RGB rgb;
+
+ // Change one LED every tick
+ uint8_t led_to_change = ( g_tick & 0x000 ) == 0 ? rand() % BACKLIGHT_LED_COUNT : 255;
+
+ for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
+ {
+ // If initialize, all get set to random colors
+ // If not, all but one will stay the same as before.
+ if ( initialize || i == led_to_change )
+ {
+ hsv.h = rand() & 0xFF;
+ hsv.s = rand() & 0xFF;
+ // Override brightness with global brightness control
+ hsv.v = g_config.brightness;;
+
+ rgb = hsv_to_rgb( hsv );
+ backlight_set_color( i, rgb.r, rgb.g, rgb.b );
+ }
+ }
+}
+
+void backlight_effect_cycle_radial1(void)
+{
+ uint8_t offset = ( g_tick << g_config.effect_speed ) & 0xFF;
+ HSV hsv = { .h = 0, .s = 255, .v = g_config.brightness };
+ RGB rgb;
+ Point point;
+ for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
+ {
+ map_led_to_point_polar( i, &point );
+ // Relies on hue being 8-bit and wrapping
+ hsv.h = point.x + offset;
+ hsv.s = point.y;
+ rgb = hsv_to_rgb( hsv );
+ backlight_set_color( i, rgb.r, rgb.g, rgb.b );
+ }
+}
+
+void backlight_effect_cycle_radial2(void)
+{
+ uint8_t offset = ( g_tick << g_config.effect_speed ) & 0xFF;
+
+ HSV hsv = { .h = 0, .s = g_config.color_1.s, .v = g_config.brightness };
+ RGB rgb;
+ Point point;
+ for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
+ {
+ map_led_to_point_polar( i, &point );
+ uint8_t offset2 = offset + point.x;
+ if ( offset2 & 0x80 )
+ {
+ offset2 = ~offset2;
+ }
+ offset2 = offset2 >> 2;
+ hsv.h = g_config.color_1.h + offset2;
+ hsv.s = 127 + ( point.y >> 1 );
+ rgb = hsv_to_rgb( hsv );
+ backlight_set_color( i, rgb.r, rgb.g, rgb.b );
+ }
+}
+
+#if defined(RGB_BACKLIGHT_M6_B)
+void backlight_effect_custom_colors(void)
+{
+ RGB rgb;
+ for ( uint8_t i = 0; i < 6; i++ )
+ {
+ HSV hsv = { .h = g_config.custom_color[i].h, .s = g_config.custom_color[i].s, .v = g_config.brightness };
+ rgb = hsv_to_rgb( hsv );
+ uint8_t led;
+ map_row_column_to_led( 0, i, &led );
+ backlight_set_color( led, rgb.r, rgb.g, rgb.b );
+ }
+}
+#endif
+
+void backlight_effect_indicators_set_colors( uint8_t index, HS color )
+{
+ HSV hsv = { .h = color.h, .s = color.s, .v = g_config.brightness };
+ RGB rgb = hsv_to_rgb( hsv );
+ if ( index == 254 )
+ {
+ backlight_set_color_all( rgb.r, rgb.g, rgb.b );
+ }
+ else
+ {
+ backlight_set_color( index, rgb.r, rgb.g, rgb.b );
+
+ // If the spacebar LED is the indicator,
+ // do the same for the spacebar stabilizers
+ if ( index == 36+0 ) // LC0
+ {
+#if defined(RGB_BACKLIGHT_ZEAL65)
+ backlight_set_color( 36+7, rgb.r, rgb.g, rgb.b ); // LC7
+ backlight_set_color( 54+14, rgb.r, rgb.g, rgb.b ); // LD14
+#elif defined(RGB_BACKLIGHT_KOYU)
+ backlight_set_color( 36+6, rgb.r, rgb.g, rgb.b ); // LC6
+ backlight_set_color( 54+14, rgb.r, rgb.g, rgb.b ); // LD14
+#elif defined(RGB_BACKLIGHT_ZEAL60) || defined(RGB_BACKLIGHT_M60_A)
+ backlight_set_color( 36+6, rgb.r, rgb.g, rgb.b ); // LC6
+ backlight_set_color( 54+13, rgb.r, rgb.g, rgb.b ); // LD13
+ if ( g_config.use_7u_spacebar )
+ {
+ backlight_set_color( 54+14, rgb.r, rgb.g, rgb.b ); // LD14
+ }
+#endif
+ }
+ }
+}
+
+// This runs after another backlight effect and replaces
+// colors already set
+void backlight_effect_indicators(void)
+{
+ if ( g_config.caps_lock_indicator.index != 255 &&
+ ( g_indicator_state & (1<<USB_LED_CAPS_LOCK) ) )
+ {
+ backlight_effect_indicators_set_colors( g_config.caps_lock_indicator.index, g_config.caps_lock_indicator.color );
+ }
+
+#if defined(RGB_BACKLIGHT_NK65)
+ if ( g_indicator_state & (1<<USB_LED_CAPS_LOCK) )
+ {
+ IS31FL3733_set_color( 7+64-1, 0, 255, 0 );
+ } else {
+ IS31FL3733_set_color( 7+64-1, 0, 0, 0 );
+ }
+ if ( g_indicator_state & (1<<USB_LED_SCROLL_LOCK) )
+ {
+ IS31FL3733_set_color( 6+64-1, 255, 0, 255 );
+ } else {
+ IS31FL3733_set_color( 6+64-1, 0, 0, 0 );
+ }
+ if ( g_indicator_state & (1<<USB_LED_NUM_LOCK) )
+ {
+ IS31FL3733_set_color( 6+64-1, 0, 255, 0 );
+ } else {
+ IS31FL3733_set_color( 6+64-1, 0, 0, 0 );
+ }
+#endif
+
+ // This if/else if structure allows higher layers to
+ // override lower ones. If we set layer 3's indicator
+ // to none, then it will NOT show layer 2 or layer 1
+ // indicators, even if those layers are on via the
+ // MO13/MO23 Fn combo magic.
+ //
+ // Basically we want to handle the case where layer 3 is
+ // still the backlight configuration layer and we don't
+ // want "all LEDs" indicators hiding the backlight effect,
+ // but still allow end users to do whatever they want.
+ if ( IS_LAYER_ON(3) )
+ {
+ if ( g_config.layer_3_indicator.index != 255 )
+ {
+ backlight_effect_indicators_set_colors( g_config.layer_3_indicator.index, g_config.layer_3_indicator.color );
+ }
+ }
+ else if ( IS_LAYER_ON(2) )
+ {
+ if ( g_config.layer_2_indicator.index != 255 )
+ {
+ backlight_effect_indicators_set_colors( g_config.layer_2_indicator.index, g_config.layer_2_indicator.color );
+ }
+ }
+ else if ( IS_LAYER_ON(1) )
+ {
+ if ( g_config.layer_1_indicator.index != 255 )
+ {
+ backlight_effect_indicators_set_colors( g_config.layer_1_indicator.index, g_config.layer_1_indicator.color );
+ }
+ }
+}
+
+#if !defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65)
+ISR(TIMER3_COMPA_vect)
+#else //STM32 interrupt
+static void gpt_backlight_timer_task(GPTDriver *gptp)
+#endif
+{
+ // delay 1 second before driving LEDs or doing anything else
+ static uint8_t startup_tick = 0;
+ if ( startup_tick < 20 )
+ {
+ startup_tick++;
+ return;
+ }
+
+ g_tick++;
+
+ if ( g_any_key_hit < 0xFFFFFFFF )
+ {
+ g_any_key_hit++;
+ }
+
+ for ( int led = 0; led < BACKLIGHT_LED_COUNT; led++ )
+ {
+ if ( g_key_hit[led] < 255 )
+ {
+ g_key_hit[led]++;
+ }
+ }
+
+ // Factory default magic value
+ if ( g_config.effect == 255 )
+ {
+ backlight_effect_rgb_test();
+ return;
+ }
+
+ // Ideally we would also stop sending zeros to the LED driver PWM buffers
+ // while suspended and just do a software shutdown. This is a cheap hack for now.
+ bool suspend_backlight = ((g_suspend_state && g_config.disable_when_usb_suspended) ||
+ (g_config.disable_after_timeout > 0 && g_any_key_hit > g_config.disable_after_timeout * 60 * 20));
+ uint8_t effect = suspend_backlight ? 0 : g_config.effect;
+
+ // Keep track of the effect used last time,
+ // detect change in effect, so each effect can
+ // have an optional initialization.
+ static uint8_t effect_last = 255;
+ bool initialize = effect != effect_last;
+ effect_last = effect;
+
+ // this gets ticked at 20 Hz.
+ // each effect can opt to do calculations
+ // and/or request PWM buffer updates.
+ switch ( effect )
+ {
+ case 0:
+ backlight_effect_all_off();
+ break;
+ case 1:
+ backlight_effect_solid_color();
+ break;
+ case 2:
+#if defined(RGB_BACKLIGHT_M6_B)
+ backlight_effect_custom_colors();
+#else
+ backlight_effect_alphas_mods();
+#endif
+ break;
+ case 3:
+ backlight_effect_gradient_up_down();
+ break;
+ case 4:
+ backlight_effect_raindrops( initialize );
+ break;
+ case 5:
+ backlight_effect_cycle_all();
+ break;
+ case 6:
+ backlight_effect_cycle_left_right();
+ break;
+ case 7:
+ backlight_effect_cycle_up_down();
+ break;
+ case 8:
+ backlight_effect_jellybean_raindrops( initialize );
+ break;
+ case 9:
+ backlight_effect_cycle_radial1();
+ break;
+ case 10:
+ backlight_effect_cycle_radial2();
+ break;
+ default:
+ backlight_effect_all_off();
+ break;
+ }
+
+ if ( ! suspend_backlight )
+ {
+#if !defined(RGB_BACKLIGHT_M6_B)
+ backlight_effect_indicators();
+#endif
+ }
+}
+
+void backlight_set_indicator_index( uint8_t *index, uint8_t row, uint8_t column )
+{
+ if ( row >= MATRIX_ROWS )
+ {
+ // Special value, 255=none, 254=all
+ *index = row;
+ }
+ else
+ {
+ map_row_column_to_led( row, column, index );
+ }
+}
+
+void backlight_get_indicator_row_col( uint8_t index, uint8_t *row, uint8_t *column )
+{
+ if ( index == 255 || index == 254 )
+ {
+ // Special value, 255=none, 254=all
+ *row = index;
+ *column = 0;
+ return;
+ }
+ for ( uint8_t r = 0; r < MATRIX_ROWS; r++ )
+ {
+ for ( uint8_t c = 0; c < MATRIX_COLS; c++ )
+ {
+ uint8_t i = 255;
+ map_row_column_to_led( r, c, &i );
+ if ( i == index )
+ {
+ *row = r;
+ *column = c;
+ return;
+ }
+ }
+ }
+}
+
+// Some helpers for setting/getting HSV
+void _set_color( HS *color, uint8_t *data )
+{
+ color->h = data[0];
+ color->s = data[1];
+}
+
+void _get_color( HS *color, uint8_t *data )
+{
+ data[0] = color->h;
+ data[1] = color->s;
+}
+
+void backlight_config_set_value( uint8_t *data )
+{
+ bool reinitialize = false;
+ uint8_t *value_id = &(data[0]);
+ uint8_t *value_data = &(data[1]);
+ switch ( *value_id )
+ {
+#if defined (RGB_BACKLIGHT_ZEAL60) || defined(RGB_BACKLIGHT_ZEAL65)
+ case id_use_split_backspace:
+ {
+ g_config.use_split_backspace = (bool)*value_data;
+ reinitialize = true;
+ break;
+ }
+#endif
+#if defined (RGB_BACKLIGHT_ZEAL60)
+ case id_use_split_left_shift:
+ {
+ g_config.use_split_left_shift = (bool)*value_data;
+ reinitialize = true;
+ break;
+ }
+ case id_use_split_right_shift:
+ {
+ g_config.use_split_right_shift = (bool)*value_data;
+ reinitialize = true;
+ break;
+ }
+ case id_use_7u_spacebar:
+ {
+ g_config.use_7u_spacebar = (bool)*value_data;
+ reinitialize = true;
+ break;
+ }
+ case id_use_iso_enter:
+ {
+ g_config.use_iso_enter = (bool)*value_data;
+ reinitialize = true;
+ break;
+ }
+ case id_disable_hhkb_blocker_leds:
+ {
+ g_config.disable_hhkb_blocker_leds = (bool)*value_data;
+ reinitialize = true;
+ break;
+ }
+#endif
+ case id_disable_when_usb_suspended:
+ {
+ g_config.disable_when_usb_suspended = (bool)*value_data;
+ break;
+ }
+ case id_disable_after_timeout:
+ {
+ g_config.disable_after_timeout = *value_data;
+ break;
+ }
+ case id_brightness:
+ {
+ g_config.brightness = *value_data;
+ break;
+ }
+ case id_effect:
+ {
+ g_config.effect = *value_data;
+ break;
+ }
+ case id_effect_speed:
+ {
+ g_config.effect_speed = *value_data;
+ break;
+ }
+ case id_color_1:
+ {
+ _set_color( &(g_config.color_1), value_data );
+ break;
+ }
+ case id_color_2:
+ {
+ _set_color( &(g_config.color_2), value_data );
+ break;
+ }
+ case id_caps_lock_indicator_color:
+ {
+ _set_color( &(g_config.caps_lock_indicator.color), value_data );
+ break;
+ }
+ case id_caps_lock_indicator_row_col:
+ {
+ backlight_set_indicator_index( &(g_config.caps_lock_indicator.index), value_data[0], value_data[1] );
+ break;
+ }
+ case id_layer_1_indicator_color:
+ {
+ _set_color( &(g_config.layer_1_indicator.color), value_data );
+ break;
+ }
+ case id_layer_1_indicator_row_col:
+ {
+ backlight_set_indicator_index( &(g_config.layer_1_indicator.index), value_data[0], value_data[1] );
+ break;
+ }
+ case id_layer_2_indicator_color:
+ {
+ _set_color( &(g_config.layer_2_indicator.color), value_data );
+ break;
+ }
+ case id_layer_2_indicator_row_col:
+ {
+ backlight_set_indicator_index( &(g_config.layer_2_indicator.index), value_data[0], value_data[1] );
+ break;
+ }
+ case id_layer_3_indicator_color:
+ {
+ _set_color( &(g_config.layer_3_indicator.color), value_data );
+ break;
+ }
+ case id_layer_3_indicator_row_col:
+ {
+ backlight_set_indicator_index( &(g_config.layer_3_indicator.index), value_data[0], value_data[1] );
+ break;
+ }
+ case id_alphas_mods:
+ {
+ for ( int i=0; i<5; i++ )
+ {
+ g_config.alphas_mods[i] = ( *(value_data+i*2) << 8 ) | ( *(value_data+i*2+1) );
+ }
+ }
+#if defined(RGB_BACKLIGHT_M6_B)
+ case id_custom_color:
+ {
+ uint8_t index = value_data[0];
+ if ( index >= 0 && index <= 6 )
+ {
+ _set_color( &(g_config.custom_color[index]), &(value_data[1]) );
+ }
+ }
+#endif
+ }
+
+ if ( reinitialize )
+ {
+ backlight_init_drivers();
+ }
+}
+
+void backlight_config_get_value( uint8_t *data )
+{
+ uint8_t *value_id = &(data[0]);
+ uint8_t *value_data = &(data[1]);
+ switch ( *value_id )
+ {
+ case id_use_split_backspace:
+ {
+ *value_data = ( g_config.use_split_backspace ? 1 : 0 );
+ break;
+ }
+ case id_use_split_left_shift:
+ {
+ *value_data = ( g_config.use_split_left_shift ? 1 : 0 );
+ break;
+ }
+ case id_use_split_right_shift:
+ {
+ *value_data = ( g_config.use_split_right_shift ? 1 : 0 );
+ break;
+ }
+ case id_use_7u_spacebar:
+ {
+ *value_data = ( g_config.use_7u_spacebar ? 1 : 0 );
+ break;
+ }
+ case id_use_iso_enter:
+ {
+ *value_data = ( g_config.use_iso_enter ? 1 : 0 );
+ break;
+ }
+ case id_disable_when_usb_suspended:
+ {
+ *value_data = ( g_config.disable_when_usb_suspended ? 1 : 0 );
+ break;
+ }
+ case id_disable_hhkb_blocker_leds:
+ {
+ *value_data = ( g_config.disable_hhkb_blocker_leds ? 1 : 0 );
+ break;
+ }
+ case id_disable_after_timeout:
+ {
+ *value_data = g_config.disable_after_timeout;
+ break;
+ }
+ case id_brightness:
+ {
+ *value_data = g_config.brightness;
+ break;
+ }
+ case id_effect:
+ {
+ *value_data = g_config.effect;
+ break;
+ }
+ case id_effect_speed:
+ {
+ *value_data = g_config.effect_speed;
+ break;
+ }
+ case id_color_1:
+ {
+ _get_color( &(g_config.color_1), value_data );
+ break;
+ }
+ case id_color_2:
+ {
+ _get_color( &(g_config.color_2), value_data );
+ break;
+ }
+ case id_caps_lock_indicator_color:
+ {
+ _get_color( &(g_config.caps_lock_indicator.color), value_data );
+ break;
+ }
+ case id_caps_lock_indicator_row_col:
+ {
+ backlight_get_indicator_row_col( g_config.caps_lock_indicator.index, &(value_data[0]), &(value_data[1]) );
+ break;
+ }
+ case id_layer_1_indicator_color:
+ {
+ _get_color( &(g_config.layer_1_indicator.color), value_data );
+ break;
+ }
+ case id_layer_1_indicator_row_col:
+ {
+ backlight_get_indicator_row_col( g_config.layer_1_indicator.index, &(value_data[0]), &(value_data[1]) );
+ break;
+ }
+ case id_layer_2_indicator_color:
+ {
+ _get_color( &(g_config.layer_2_indicator.color), value_data );
+ break;
+ }
+ case id_layer_2_indicator_row_col:
+ {
+ backlight_get_indicator_row_col( g_config.layer_2_indicator.index, &(value_data[0]), &(value_data[1]) );
+ break;
+ }
+ case id_layer_3_indicator_color:
+ {
+ _get_color( &(g_config.layer_3_indicator.color), value_data );
+ break;
+ }
+ case id_layer_3_indicator_row_col:
+ {
+ backlight_get_indicator_row_col( g_config.layer_3_indicator.index, &(value_data[0]), &(value_data[1]) );
+ break;
+ }
+ case id_alphas_mods:
+ {
+ for ( int i=0; i<5; i++ )
+ {
+ *(value_data+i*2) = g_config.alphas_mods[i] >> 8;
+ *(value_data+i*2+1) = g_config.alphas_mods[i] & 0xFF;
+ }
+ }
+#if defined(RGB_BACKLIGHT_M6_B)
+ case id_custom_color:
+ {
+ uint8_t index = value_data[0];
+ if ( index >= 0 && index <= 6 )
+ {
+ _get_color( &(g_config.custom_color[index]), &(value_data[1]) );
+ }
+ }
+#endif
+ }
+}
+
+void backlight_config_set_alphas_mods( uint16_t *alphas_mods )
+{
+ for ( int i=0; i<5; i++ )
+ {
+ g_config.alphas_mods[i] = alphas_mods[i];
+ }
+
+ backlight_config_save();
+}
+
+void backlight_config_load(void)
+{
+ eeprom_read_block( &g_config, ((void*)RGB_BACKLIGHT_CONFIG_EEPROM_ADDR), sizeof(backlight_config) );
+}
+
+void backlight_config_save(void)
+{
+ eeprom_update_block( &g_config, ((void*)RGB_BACKLIGHT_CONFIG_EEPROM_ADDR), sizeof(backlight_config) );
+}
+
+void backlight_init_drivers(void)
+{
+ // Initialize I2C
+ i2c_init();
+
+#if defined(RGB_BACKLIGHT_M6_B)
+ IS31FL3218_init();
+#elif defined(RGB_BACKLIGHT_HS60)
+ IS31FL3733_init( ISSI_ADDR_1, 0 );
+
+ for ( int index = 0; index < DRIVER_LED_TOTAL; index++ )
+ {
+#if defined(HS60_ANSI)
+ bool enabled = !( ( index == 48-1 ) || //LA48
+ ( index == 51-1 ) || //LA51
+ ( index == 61-1 ) ); //LA61
+#elif defined(HS60_HHKB)
+ bool enabled = !( ( index == 61-1 ) || //LA61
+ ( index == 62-1 ) ); //LA62
+#else //HS60_ISO
+ bool enabled = !( ( index == 51-1 ) || //LA51
+ ( index == 61-1 ) ); //LA61
+#endif
+ // This only caches it for later
+ IS31FL3733_set_led_control_register( index, enabled, enabled, enabled );
+ }
+ // This actually updates the LED drivers
+ IS31FL3733_update_led_control_registers( ISSI_ADDR_1, 0 );
+#elif defined(RGB_BACKLIGHT_NK65)
+ IS31FL3733_init( ISSI_ADDR_1, 0 );
+ IS31FL3733_init( ISSI_ADDR_2, 0 );
+
+ for ( int index = 0; index < DRIVER_LED_TOTAL; index++ )
+ {
+ bool enabled = !( ( index == 61-1 ) || //LA61
+ ( index > 6+64-1 ) ); //LB7-LB64
+ // This only caches it for later
+ IS31FL3733_set_led_control_register( index, enabled, enabled, enabled );
+ }
+ IS31FL3733_set_led_control_register( 7+64-1, 0, 1, 0 ); //Enable LB7 green enable for indicators
+ // This actually updates the LED drivers
+ IS31FL3733_update_led_control_registers( ISSI_ADDR_1, 0 );
+ IS31FL3733_update_led_control_registers( ISSI_ADDR_2, 1 );
+#else
+ IS31FL3731_init( ISSI_ADDR_1 );
+ IS31FL3731_init( ISSI_ADDR_2 );
+
+#if defined(RGB_BACKLIGHT_U80_A)
+ IS31FL3731_init( ISSI_ADDR_3 );
+#endif
+
+ // Experimental feature, not in configuration yet
+#if defined(RGB_BACKLIGHT_ZEAL60)
+ bool disable_spacebar_stab_leds = false;
+#endif
+
+ for ( int index = 0; index < DRIVER_LED_TOTAL; index++ )
+ {
+ // OR the possible "disabled" cases together, then NOT the result to get the enabled state
+ // LC6 LD13 not present on Zeal65
+#if defined(RGB_BACKLIGHT_ZEAL65)
+ bool enabled = !( ( index == 18+5 && !g_config.use_split_backspace ) || // LB5
+ ( index == 36+6 ) || // LC6
+ ( index == 54+13 ) ); // LD13
+#elif defined(RGB_BACKLIGHT_KOYU)
+ bool enabled = !( ( index == 36+15 ) || // LC15
+ ( index == 54+13 ) || // LD13
+ ( index == 54+17 ) ); // LD17
+#elif defined(RGB_BACKLIGHT_M60_A)
+ bool enabled = !(
+ // LB6 LB7 LB8 LB15 LB16 LB17 not present on M60-A
+ ( index == 18+6 ) || // LB6
+ ( index == 18+7 ) || // LB7
+ ( index == 18+8 ) || // LB8
+ ( index == 18+15 ) || // LB15
+ ( index == 18+16 ) || // LB16
+ ( index == 18+17 ) || // LB17
+ // HHKB blockers (LC17, LD17) and ISO extra keys (LC15,LD13) not present on M60-A
+ ( index == 36+17 ) || // LC17
+ ( index == 54+17 ) || // LD17
+ ( index == 36+15 ) || // LC15
+ ( index == 54+13 ) ); // LD13
+#elif defined(RGB_BACKLIGHT_ZEAL60)
+ // LB6 LB7 LB8 LB15 LB16 LB17 not present on Zeal60
+ bool enabled = !( ( index == 18+5 && !g_config.use_split_backspace ) || // LB5
+ ( index == 36+15 && !g_config.use_split_left_shift ) || // LC15
+ ( index == 54+8 && !g_config.use_split_right_shift ) || // LD8
+ ( index == 54+13 && g_config.use_7u_spacebar ) || // LD13
+ ( index == 36+17 && g_config.disable_hhkb_blocker_leds ) || // LC17
+ ( index == 54+17 && g_config.disable_hhkb_blocker_leds ) || // LD17
+ ( index == 18+6 ) || // LB6
+ ( index == 18+7 ) || // LB7
+ ( index == 18+8 ) || // LB8
+ ( index == 18+15 ) || // LB15
+ ( index == 18+16 ) || // LB16
+ ( index == 18+17 ) || // LB17
+ ( index == 36+6 && disable_spacebar_stab_leds ) || // LC6
+ ( index == 54+13 && disable_spacebar_stab_leds ) || // LD13
+ ( index == 54+14 && disable_spacebar_stab_leds && g_config.use_7u_spacebar ) ); // LD14
+#elif defined(RGB_BACKLIGHT_U80_A)
+// LB5, LB6, LB7, LB8, LB15, LB16, LB17, LC15, LD8, LD13, LE0-LE8, LF13
+ bool enabled = !(
+ ( index == 18+5 ) || // LB5
+ ( index == 18+6 ) || // LB6
+ ( index == 18+7 ) || // LB7
+ ( index == 18+8 ) || // LB8
+ ( index == 18+15 ) || // LB15
+ ( index == 18+16 ) || // LB16
+ ( index == 18+16 ) || // LB17
+ ( index == 36+15 ) || // LC15
+ ( index == 54+8 ) || // LD8
+ ( index == 54+13 ) || // LD13
+ ( index >= 72+0 && index <= 72+8 ) || // LE0-LE8
+ ( index == 90+13 ) ); // LF13
+#endif
+ // This only caches it for later
+ IS31FL3731_set_led_control_register( index, enabled, enabled, enabled );
+ }
+ // This actually updates the LED drivers
+ IS31FL3731_update_led_control_registers( ISSI_ADDR_1, 0 );
+ IS31FL3731_update_led_control_registers( ISSI_ADDR_2, 1 );
+#if defined(RGB_BACKLIGHT_U80_A)
+ IS31FL3731_update_led_control_registers( ISSI_ADDR_3, 2 );
+#endif
+#endif // !defined(RGB_BACKLIGHT_M6_B)
+
+ // TODO: put the 1 second startup delay here?
+
+ // clear the key hits
+ for ( int led=0; led<BACKLIGHT_LED_COUNT; led++ )
+ {
+ g_key_hit[led] = 255;
+ }
+}
+
+bool process_record_backlight(uint16_t keycode, keyrecord_t *record)
+{
+ // Record keypresses for backlight effects
+ if ( record->event.pressed )
+ {
+ backlight_set_key_hit( record->event.key.row, record->event.key.col );
+ }
+
+ switch(keycode)
+ {
+ case BR_INC:
+ if (record->event.pressed)
+ {
+ backlight_brightness_increase();
+ }
+ return false;
+ break;
+ case BR_DEC:
+ if (record->event.pressed)
+ {
+ backlight_brightness_decrease();
+ }
+ return false;
+ break;
+ case EF_INC:
+ if (record->event.pressed)
+ {
+ backlight_effect_increase();
+ }
+ return false;
+ break;
+ case EF_DEC:
+ if (record->event.pressed)
+ {
+ backlight_effect_decrease();
+ }
+ return false;
+ break;
+ case ES_INC:
+ if (record->event.pressed)
+ {
+ backlight_effect_speed_increase();
+ }
+ return false;
+ break;
+ case ES_DEC:
+ if (record->event.pressed)
+ {
+ backlight_effect_speed_decrease();
+ }
+ return false;
+ break;
+ case H1_INC:
+ if (record->event.pressed)
+ {
+ backlight_color_1_hue_increase();
+ }
+ return false;
+ break;
+ case H1_DEC:
+ if (record->event.pressed)
+ {
+ backlight_color_1_hue_decrease();
+ }
+ return false;
+ break;
+ case S1_INC:
+ if (record->event.pressed)
+ {
+ backlight_color_1_sat_increase();
+ }
+ return false;
+ break;
+ case S1_DEC:
+ if (record->event.pressed)
+ {
+ backlight_color_1_sat_decrease();
+ break;
+ }
+ return false;
+ break;
+ case H2_INC:
+ if (record->event.pressed)
+ {
+ backlight_color_2_hue_increase();
+ }
+ return false;
+ break;
+ case H2_DEC:
+ if (record->event.pressed)
+ {
+ backlight_color_2_hue_decrease();
+ }
+ return false;
+ break;
+ case S2_INC:
+ if (record->event.pressed)
+ {
+ backlight_color_2_sat_increase();
+ }
+ return false;
+ break;
+ case S2_DEC:
+ if (record->event.pressed)
+ {
+ backlight_color_2_sat_decrease();
+ break;
+ }
+ return false;
+ break;
+ }
+
+ return true;
+}
+
+// Deals with the messy details of incrementing an integer
+uint8_t increment( uint8_t value, uint8_t step, uint8_t min, uint8_t max )
+{
+ int16_t new_value = value;
+ new_value += step;
+ return MIN( MAX( new_value, min ), max );
+}
+
+uint8_t decrement( uint8_t value, uint8_t step, uint8_t min, uint8_t max )
+{
+ int16_t new_value = value;
+ new_value -= step;
+ return MIN( MAX( new_value, min ), max );
+}
+
+void backlight_effect_increase(void)
+{
+ g_config.effect = increment( g_config.effect, 1, 0, BACKLIGHT_EFFECT_MAX );
+ backlight_config_save();
+}
+
+void backlight_effect_decrease(void)
+{
+ g_config.effect = decrement( g_config.effect, 1, 0, BACKLIGHT_EFFECT_MAX );
+ backlight_config_save();
+}
+
+void backlight_effect_speed_increase(void)
+{
+ g_config.effect_speed = increment( g_config.effect_speed, 1, 0, 3 );
+ backlight_config_save();
+}
+
+void backlight_effect_speed_decrease(void)
+{
+ g_config.effect_speed = decrement( g_config.effect_speed, 1, 0, 3 );
+ backlight_config_save();
+}
+
+void backlight_brightness_increase(void)
+{
+ g_config.brightness = increment( g_config.brightness, 8, 0, 255 );
+ backlight_config_save();
+}
+
+void backlight_brightness_decrease(void)
+{
+ g_config.brightness = decrement( g_config.brightness, 8, 0, 255 );
+ backlight_config_save();
+}
+
+void backlight_color_1_hue_increase(void)
+{
+ g_config.color_1.h = increment( g_config.color_1.h, 8, 0, 255 );
+ backlight_config_save();
+}
+
+void backlight_color_1_hue_decrease(void)
+{
+ g_config.color_1.h = decrement( g_config.color_1.h, 8, 0, 255 );
+ backlight_config_save();
+}
+
+void backlight_color_1_sat_increase(void)
+{
+ g_config.color_1.s = increment( g_config.color_1.s, 8, 0, 255 );
+ backlight_config_save();
+}
+
+void backlight_color_1_sat_decrease(void)
+{
+ g_config.color_1.s = decrement( g_config.color_1.s, 8, 0, 255 );
+ backlight_config_save();
+}
+
+void backlight_color_2_hue_increase(void)
+{
+ g_config.color_2.h = increment( g_config.color_2.h, 8, 0, 255 );
+ backlight_config_save();
+}
+
+void backlight_color_2_hue_decrease(void)
+{
+ g_config.color_2.h = decrement( g_config.color_2.h, 8, 0, 255 );
+ backlight_config_save();
+}
+
+void backlight_color_2_sat_increase(void)
+{
+ g_config.color_2.s = increment( g_config.color_2.s, 8, 0, 255 );
+ backlight_config_save();
+}
+
+void backlight_color_2_sat_decrease(void)
+{
+ g_config.color_2.s = decrement( g_config.color_2.s, 8, 0, 255 );
+ backlight_config_save();
+}
+
+#if defined(RGB_DEBUGGING_ONLY)
+void backlight_test_led( uint8_t index, bool red, bool green, bool blue )
+{
+ for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
+ {
+ if ( i == index )
+ {
+ IS31FL3731_set_led_control_register( i, red, green, blue );
+ }
+ else
+ {
+ IS31FL3731_set_led_control_register( i, false, false, false );
+ }
+ }
+}
+
+void backlight_debug_led( bool state )
+{
+ if (state)
+ {
+ // Output high.
+ DDRE |= (1<<6);
+ PORTE |= (1<<6);
+ }
+ else
+ {
+ // Output low.
+ DDRE &= ~(1<<6);
+ PORTE &= ~(1<<6);
+ }
+}
+#endif // defined(RGB_DEBUGGING_ONLY)
+
--- /dev/null
+/* Copyright 2017 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#if RGB_BACKLIGHT_ENABLED
+#else
+#error rgb_backlight.h included when RGB_BACKLIGHT_ENABLED == 0
+#endif // RGB_BACKLIGHT_ENABLED
+
+#include <stdint.h>
+#include <stdbool.h>
+
+#include "quantum/color.h"
+
+typedef struct PACKED
+{
+ uint8_t h;
+ uint8_t s;
+} HS;
+
+typedef struct
+{
+ HS color;
+ uint8_t index;
+} backlight_config_indicator;
+
+typedef struct
+{
+ bool use_split_backspace:1; // |
+ bool use_split_left_shift:1; // |
+ bool use_split_right_shift:1; // |
+ bool use_7u_spacebar:1; // |
+ bool use_iso_enter:1; // |
+ bool disable_when_usb_suspended:1; // |
+ bool disable_hhkb_blocker_leds:1; // |
+ bool __pad7:1; // 1 byte
+ uint8_t disable_after_timeout; // 1 byte
+ uint8_t brightness; // 1 byte
+ uint8_t effect; // 1 byte
+ uint8_t effect_speed; // 1 byte
+ HS color_1; // 2 bytes
+ HS color_2; // 2 bytes
+ backlight_config_indicator caps_lock_indicator; // 3 bytes
+ backlight_config_indicator layer_1_indicator; // 3 bytes
+ backlight_config_indicator layer_2_indicator; // 3 bytes
+ backlight_config_indicator layer_3_indicator; // 3 bytes
+ uint16_t alphas_mods[5]; // 10 bytes
+#if defined(RGB_BACKLIGHT_M6_B)
+ HS custom_color[6]; // 12 bytes
+#endif
+} backlight_config; // = 31 bytes (M6-B = 43 bytes)
+
+void backlight_config_load(void);
+void backlight_config_save(void);
+void backlight_config_set_value( uint8_t *data );
+void backlight_config_get_value( uint8_t *data );
+
+void backlight_init_drivers(void);
+
+void backlight_timer_init(void);
+void backlight_timer_enable(void);
+void backlight_timer_disable(void);
+
+void backlight_set_suspend_state(bool state);
+void backlight_set_indicator_state(uint8_t state);
+
+// This should not be called from an interrupt
+// (eg. from a timer interrupt).
+// Call this while idle (in between matrix scans).
+// If the buffer is dirty, it will update the driver with the buffer.
+void backlight_update_pwm_buffers(void);
+
+// Handle backlight specific keycodes
+bool process_record_backlight(uint16_t keycode, keyrecord_t *record);
+
+void backlight_set_key_hit(uint8_t row, uint8_t col);
+
+void backlight_effect_increase(void);
+void backlight_effect_decrease(void);
+void backlight_effect_speed_increase(void);
+void backlight_effect_speed_decrease(void);
+
+void backlight_brightness_increase(void);
+void backlight_brightness_decrease(void);
+
+void backlight_color_1_hue_increase(void);
+void backlight_color_1_hue_decrease(void);
+void backlight_color_1_sat_increase(void);
+void backlight_color_1_sat_decrease(void);
+void backlight_color_2_hue_increase(void);
+void backlight_color_2_hue_decrease(void);
+void backlight_color_2_sat_increase(void);
+void backlight_color_2_sat_decrease(void);
+
+void backlight_test_led( uint8_t index, bool red, bool green, bool blue );
+void backlight_debug_led(bool state);
+
--- /dev/null
+/* Copyright 2017 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+enum wt_rgb_backlight_config_value
+{
+ id_use_split_backspace = 0x01,
+ id_use_split_left_shift = 0x02,
+ id_use_split_right_shift = 0x03,
+ id_use_7u_spacebar = 0x04,
+ id_use_iso_enter = 0x05,
+ id_disable_hhkb_blocker_leds = 0x06,
+ id_disable_when_usb_suspended = 0x07,
+ id_disable_after_timeout = 0x08,
+ id_brightness = 0x09,
+ id_effect = 0x0A,
+ id_effect_speed = 0x0B,
+ id_color_1 = 0x0C,
+ id_color_2 = 0x0D,
+ id_caps_lock_indicator_color = 0x0E,
+ id_caps_lock_indicator_row_col = 0x0F,
+ id_layer_1_indicator_color = 0x10,
+ id_layer_1_indicator_row_col = 0x11,
+ id_layer_2_indicator_color = 0x12,
+ id_layer_2_indicator_row_col = 0x13,
+ id_layer_3_indicator_color = 0x14,
+ id_layer_3_indicator_row_col = 0x15,
+ id_alphas_mods = 0x16,
+ id_custom_color = 0x17
+};
--- /dev/null
+/* Copyright 2017 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+// This is hardcoded at 0x5F00 so it's well after keycode value SAFE_RANGE
+enum wt_rgb_backlight_keycodes {
+ BR_INC = 0x5F00, // backlight brightness increase
+ BR_DEC, // backlight brightness decrease
+ EF_INC, // backlight effect increase
+ EF_DEC, // backlight effect decrease
+ ES_INC,
+ ES_DEC,
+ H1_INC,
+ H1_DEC,
+ S1_INC,
+ S1_DEC,
+ H2_INC,
+ H2_DEC,
+ S2_INC,
+ S2_DEC
+};
--- /dev/null
+/* Copyright 2017 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "config_common.h"
+
+// USB Device descriptor parameter
+#define VENDOR_ID 0x5A45 // ZealPC ("ZE")
+#define PRODUCT_ID 0x0060 // Zeal60
+#define DEVICE_VER 0x0001
+#define MANUFACTURER ZealPC
+#define PRODUCT Zeal60
+#define DESCRIPTION Zeal60
+
+// key matrix size
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+// Zeal60 PCB default pin-out
+#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
+#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 }
+#define UNUSED_PINS
+
+// IS31FL3731 driver
+#define DRIVER_COUNT 2
+#define DRIVER_LED_TOTAL 72
+
+// COL2ROW or ROW2COL
+#define DIODE_DIRECTION COL2ROW
+
+// Set 0 if debouncing isn't needed
+#define DEBOUNCE 5
+
+// Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap
+#define LOCKING_SUPPORT_ENABLE
+// Locking resynchronize hack
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+// disable debug print
+//#define NO_DEBUG
+
+// disable print
+//#define NO_PRINT
+
+// disable action features
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#define RGB_BACKLIGHT_ENABLED 1
+
+// This conditionally compiles the backlight code for Zeal60 specifics
+#define RGB_BACKLIGHT_ZEAL60
+
+// enable/disable LEDs based on layout
+#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0
+#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0
+#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0
+#define RGB_BACKLIGHT_USE_7U_SPACEBAR 0
+#define RGB_BACKLIGHT_USE_ISO_ENTER 0
+#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0
+
+// disable backlight when USB suspended (PC sleep/hibernate/shutdown)
+#define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0
+
+// disable backlight after timeout in minutes, 0 = no timeout
+#define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0
+
+// the default brightness
+#define RGB_BACKLIGHT_BRIGHTNESS 255
+
+// the default effect (RGB test)
+#define RGB_BACKLIGHT_EFFECT 255
+
+// the default effect speed (0-3)
+#define RGB_BACKLIGHT_EFFECT_SPEED 0
+
+// the default color1 and color2
+#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 }
+#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 }
+
+// These define which keys in the matrix are alphas/mods
+// Used for backlight effects so colors are different for
+// alphas vs. mods
+// Each value is for a row, bit 0 is column 0
+// Alpha=0 Mod=1
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0b0010000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0b0000000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0b0001000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0011000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0011110000000111
+
+#define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+#define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+#define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+#define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+
+#define DYNAMIC_KEYMAP_LAYER_COUNT 4
+
+// EEPROM usage
+
+// TODO: refactor with new user EEPROM code (coming soon)
+#define EEPROM_MAGIC 0x451F
+#define EEPROM_MAGIC_ADDR 32
+// Bump this every time we change what we store
+// This will automatically reset the EEPROM with defaults
+// and avoid loading invalid data from the EEPROM
+#define EEPROM_VERSION 0x08
+#define EEPROM_VERSION_ADDR 34
+
+// Backlight config starts after EEPROM version
+#define RGB_BACKLIGHT_CONFIG_EEPROM_ADDR 35
+// Dynamic keymap starts after backlight config (35+31)
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 66
+// Dynamic macro starts after dynamic keymaps (66+(4*5*14*2)) = (66+560)
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 626
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 398
+#define DYNAMIC_KEYMAP_MACRO_COUNT 16
--- /dev/null
+{
+ "keyboard_name": "Zeal60",
+ "url": "https://zealpc.net",
+ "maintainer": "Wilba",
+ "bootloader": "atmel-dfu",
+ "width": 15,
+ "height": 5,
+ "layouts": {
+ "LAYOUT_all": {
+ "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+ },
+ "LAYOUT_60_ansi": {
+ "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+ },
+ "LAYOUT_60_iso": {
+ "layout": [{"label":"\u00ac", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"\"", "x":2, "y":0}, {"label":"\u00a3", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"@", "x":11.75, "y":2}, {"label":"~", "x":12.75, "y":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"AltGr", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+ },
+ "LAYOUT_60_ansi_split_bs_rshift": {
+ "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+ },
+ "LAYOUT_60_hhkb": {
+ "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"~", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Delete", "x":13.5, "y":1, "w":1.5}, {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Os", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Alt", "x":11, "y":4, "w":1.5}, {"label":"Os", "x":12.5, "y":4}]
+ }
+ }
+}
\ No newline at end of file
--- /dev/null
+#pragma once
+
+/* enable/disable LEDs based on layout */
+#undef RGB_BACKLIGHT_USE_SPLIT_BACKSPACE
+#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0
+
+#undef RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT
+#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0
+
+#undef RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT
+#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0
+
+#undef RGB_BACKLIGHT_USE_7U_SPACEBAR
+#define RGB_BACKLIGHT_USE_7U_SPACEBAR 0
+
+#undef RGB_BACKLIGHT_USE_ISO_ENTER
+#define RGB_BACKLIGHT_USE_ISO_ENTER 0
+
+#undef RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS
+#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0
+
--- /dev/null
+// ANSI split backspace/right shift layout for Zeal60
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+// Default layer
+[0] = LAYOUT_60_ansi_split_bs_rshift(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_DEL,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, FN_MO13,
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, FN_MO23, KC_RCTL),
+
+// Fn1 Layer
+[1] = LAYOUT_60_ansi_split_bs_rshift(
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL,
+ KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_EJCT, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+// Fn2 Layer
+[2] = LAYOUT_60_ansi_split_bs_rshift(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+// Fn3 Layer (zeal60 Configuration)
+[3] = LAYOUT_60_ansi_split_bs_rshift(
+ KC_TRNS, EF_DEC, EF_INC, H1_DEC, H1_INC, H2_DEC, H2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BR_DEC, BR_INC, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, S1_DEC, S1_INC, S2_DEC, S2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, ES_DEC, ES_INC, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+};
--- /dev/null
+#pragma once
+
+/* enable/disable LEDs based on layout */
+#undef RGB_BACKLIGHT_USE_SPLIT_BACKSPACE
+#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0
+
+#undef RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT
+#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0
+
+#undef RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT
+#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 1
+
+#undef RGB_BACKLIGHT_USE_7U_SPACEBAR
+#define RGB_BACKLIGHT_USE_7U_SPACEBAR 1
+
+#undef RGB_BACKLIGHT_USE_ISO_ENTER
+#define RGB_BACKLIGHT_USE_ISO_ENTER 0
+
+#undef RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS
+#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0
+
+#undef RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED
+#define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 1
+
+#undef RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT
+#define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 3
+
+#undef RGB_BACKLIGHT_EFFECT
+#define RGB_BACKLIGHT_EFFECT 0
\ No newline at end of file
--- /dev/null
+// tsangan layout for Zeal60
+#include QMK_KEYBOARD_H
+
+enum keyboard_layers {
+ _BL = 0, // Base Layer
+ _FL, // Function Layer
+ _CL // Control Layer
+};
+
+// Custom #defined keycodes (shorter macros for readability)
+#define KC_CTES CTL_T(KC_ESC)
+#define KC_RSUP RSFT_T(KC_UP)
+#define KC_RGLT RCMD_T(KC_LEFT)
+#define KC_RADN LT(_CL, KC_DOWN)
+#define KC_RCRT RCTL_T(KC_RIGHT)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [_BL] = LAYOUT_60_ansi_split_bs_rshift(
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, XXXXXXX,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+ KC_CTES, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSUP, MO(_FL),
+ KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, XXXXXXX, KC_RGLT, KC_RADN, KC_RCRT
+ ),
+ [_FL] = LAYOUT_60_ansi_split_bs_rshift(
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, _______,
+ _______, KC_HOME, KC_UP, KC_END, _______, _______, _______, _______, KC_MUTE, _______, _______, KC_PGDN, KC_PGUP, _______,
+ _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, KC_SLCK, KC_VOLD, KC_VOLU, KC_PAUS, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______
+ ),
+ [_CL] = LAYOUT_60_ansi_split_bs_rshift(
+ _______, EF_DEC, EF_INC, H1_DEC, H1_INC, H2_DEC, H2_INC, _______, _______, _______, _______, BR_DEC, BR_INC, _______, _______,
+ _______, _______, _______, S1_DEC, S1_INC, S2_DEC, S2_INC, _______, _______, _______, _______, ES_DEC, ES_INC, RESET,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______
+ ),
+};
--- /dev/null
+#pragma once
+
+/* enable/disable LEDs based on layout */
+#undef RGB_BACKLIGHT_USE_SPLIT_BACKSPACE
+#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0
+
+#undef RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT
+#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0
+
+#undef RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT
+#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0
+
+#undef RGB_BACKLIGHT_USE_7U_SPACEBAR
+#define RGB_BACKLIGHT_USE_7U_SPACEBAR 0
+
+#undef RGB_BACKLIGHT_USE_ISO_ENTER
+#define RGB_BACKLIGHT_USE_ISO_ENTER 0
+
+#undef RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS
+#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0
--- /dev/null
+// Default layout for Zeal60
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+// Default layer
+[0] = LAYOUT_60_ansi(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, FN_MO13, FN_MO23, KC_RCTL),
+
+// Fn1 Layer
+[1] = LAYOUT_60_ansi(
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL ,
+ KC_CAPS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS,
+ KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_END, KC_PGDN, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+// Fn2 Layer
+[2] = LAYOUT_60_ansi(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+// Fn3 Layer (zeal60 Configuration)
+[3] = LAYOUT_60_ansi(
+ KC_TRNS, EF_DEC, EF_INC, H1_DEC, H1_INC, H2_DEC, H2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BR_DEC, BR_INC, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, S1_DEC, S1_INC, S2_DEC, S2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, ES_DEC, ES_INC, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+};
--- /dev/null
+#pragma once
+
+/* enable/disable LEDs based on layout */
+#undef RGB_BACKLIGHT_USE_SPLIT_BACKSPACE
+#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 1
+
+#undef RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT
+#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0
+
+#undef RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT
+#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 1
+
+#undef RGB_BACKLIGHT_USE_7U_SPACEBAR
+#define RGB_BACKLIGHT_USE_7U_SPACEBAR 1
+
+#undef RGB_BACKLIGHT_USE_ISO_ENTER
+#define RGB_BACKLIGHT_USE_ISO_ENTER 0
+
+#undef RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS
+#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 1
--- /dev/null
+// HHKB layout for Zeal60
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+// Default layer
+[0] = LAYOUT_60_hhkb(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,
+ KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, FN_MO13,
+ KC_LGUI, KC_LALT, KC_SPC, KC_RALT, FN_MO23),
+
+// Fn1 Layer
+[1] = LAYOUT_60_hhkb(
+ KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL,
+ KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_EJCT, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+// Fn2 Layer
+[2] = LAYOUT_60_hhkb(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+// Fn3 Layer (zeal60 Configuration)
+[3] = LAYOUT_60_hhkb(
+ KC_TRNS, EF_DEC, EF_INC, H1_DEC, H1_INC, H2_DEC, H2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BR_DEC, BR_INC, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, S1_DEC, S1_INC, S2_DEC, S2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, ES_DEC, ES_INC, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+};
--- /dev/null
+#pragma once
+
+/* enable/disable LEDs based on layout */
+#undef RGB_BACKLIGHT_USE_SPLIT_BACKSPACE
+#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0
+
+#undef RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT
+#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 1
+
+#undef RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT
+#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0
+
+#undef RGB_BACKLIGHT_USE_7U_SPACEBAR
+#define RGB_BACKLIGHT_USE_7U_SPACEBAR 0
+
+#undef RGB_BACKLIGHT_USE_ISO_ENTER
+#define RGB_BACKLIGHT_USE_ISO_ENTER 1
+
+#undef RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS
+#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0
--- /dev/null
+// ISO layout for Zeal60
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+// Default layer
+[0] = LAYOUT_60_iso(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_ENT,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS,
+ KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, FN_MO13, FN_MO23, KC_RCTL),
+
+// Fn1 Layer
+[1] = LAYOUT_60_iso(
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL ,
+ KC_CAPS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS,
+ KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_END, KC_PGDN, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+// Fn2 Layer
+[2] = LAYOUT_60_iso(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+// Fn3 Layer (zeal60 Configuration)
+[3] = LAYOUT_60_iso(
+ KC_TRNS, EF_DEC, EF_INC, H1_DEC, H1_INC, H2_DEC, H2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BR_DEC, BR_INC, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, S1_DEC, S1_INC, S2_DEC, S2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, ES_DEC, ES_INC, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+};
--- /dev/null
+#pragma once
+
+/* enable/disable LEDs based on layout */
+#undef RGB_BACKLIGHT_USE_SPLIT_BACKSPACE
+#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 1
+
+#undef RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT
+#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0
+
+#undef RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT
+#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 1
+
+#undef RGB_BACKLIGHT_USE_7U_SPACEBAR
+#define RGB_BACKLIGHT_USE_7U_SPACEBAR 0
+
+#undef RGB_BACKLIGHT_USE_ISO_ENTER
+#define RGB_BACKLIGHT_USE_ISO_ENTER 0
+
+#undef RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS
+#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0
+
--- /dev/null
+// Ryan MacLean's layout for Zeal60
+// Note that LGUI and RGUI are swapped with LALT and RALT respectively, for use with Macs
+// Also note that Control has replaced Caps Lock, and that pressing left or right shift once
+// will output left parenthese and right parenthese respectively.
+#include QMK_KEYBOARD_H
+
+// [0,13] is either left key of split backspace (e.g. HHKB \| key) or 2U backspace
+// [1,13] is either backslash or ISO Enter
+// [2,12] is either ANSI Enter or key left of ISO Enter
+// [2,13] is right key of split backspace (e.g. HHKB `~ key)
+// [3,1] is right key of split left-shift (e.g ISO key)
+// [3,13] is right key of split right-shift (e.g. HHKB Fn key)
+
+
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) // this is the function signature -- just copy/paste it into your keymap file as it is. KC_LSFT KC_LALT KC_LGUI KC_4
+{
+ switch(id) {
+ case 0: // macOS screenshot to capture are to clipboard - this would trigger when you hit a key mapped as M(0)
+ if (record->event.pressed) {
+ return MACRO( D(LSFT), D(LCTL), D(LGUI), T(4), U(LSFT), U(LCTL), U(LGUI), W(255), END ); // this sends the string 'hello' when the macro executes
+ }
+ break;
+ case 1: // macOS screenshot capture area to file - this would trigger when you hit a key mapped as M(1)
+ if (record->event.pressed) {
+ return MACRO( D(LSFT), D(LGUI), T(4), U(LSFT), U(LGUI), W(255), END ); // this sends the string 'hello' when the macro executes
+ }
+ break;
+ case 2: // macOS screenshot to clipboard - this would trigger when you hit a key mapped as M(2)
+ if (record->event.pressed) {
+ return MACRO( D(LSFT), D(LCTL), D(LGUI), T(3), U(LSFT), U(LCTL), U(LGUI), W(255), END ); // this sends the string 'hello' when the macro executes
+ }
+ break;
+ case 3: // macOS screenshot to file - this would trigger when you hit a key mapped as M(3)
+ if (record->event.pressed) {
+ return MACRO( D(LSFT), D(LGUI), T(3), U(LSFT), U(LGUI), W(255), END ); // this sends the string 'hello' when the macro executes
+ }
+ break;
+ }
+ return MACRO_NONE;
+};
+
+#define CADETL MT(KC_LSFT, KC_LBRC)
+#define CADETR MT(KC_RSFT, KC_RBRC)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+// Default layer
+[0] = {
+ {KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS},
+ {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC},
+ {KC_LGUI, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_GRV},
+ {KC_LSPO, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC, FN_MO13},
+ {KC_LCTL, KC_LALT, KC_LGUI, KC_NO, KC_NO, KC_NO, KC_NO, KC_SPC, KC_NO, KC_NO, KC_RGUI, KC_RALT, KC_RCTL, FN_MO23}
+},
+
+// Fn1 Layer
+[1] = {
+ {KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS},
+ {KC_CAPS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_DEL},
+ {KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_LEFT, KC_UP, KC_DOWN, KC_RGHT, KC_HOME, KC_PGUP, KC_TRNS, KC_TRNS},
+ {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_END, KC_PGDN, KC_TRNS, KC_TRNS},
+ {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}
+},
+
+// Fn2 Layer
+[2] = {
+ {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
+ {KC_TRNS, M(2), M(3), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
+ {KC_TRNS, M(1), M(0), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
+ {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
+ {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}
+},
+
+// Fn3 Layer (zeal60 Configuration)
+[3] = {
+ {KC_TRNS, EF_DEC, EF_INC, H1_DEC, H1_INC, H2_DEC, H2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BR_DEC, BR_INC, KC_TRNS},
+ {KC_TRNS, KC_TRNS, KC_TRNS, S1_DEC, S1_INC, S2_DEC, S2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
+ {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
+ {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
+ {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}
+}
+
+};
--- /dev/null
+# Build Options
+# change to "no" to disable the options, or define them in the Makefile in
+# the appropriate keymap folder that will get included automatically
+#
+RGBLIGHT_ENABLE = yes
+AUDIO_ENABLE = no # Underglow cannot be used with audio.
--- /dev/null
+# RGB Underglow Strip on the Zeal60: A Guide
+
+<img src="https://i.imgur.com/UuUdOCb.jpg" width="800">
+
+## Requirements
+
+- WS2812B RGB strip, preferably 60 LEDs/meter
+- Wire, solder
+- Tape, hot glue, or some sort of adhesive
+
+## A. Connecting the strip
+You might find the [**full PCB image**](https://cdn.shopify.com/s/files/1/0490/7329/files/zeal60jumpers.png) helpful. Ignore the red boxes!
+
+1. Connect V+ to the receiving end of the thermistor labeled F1; connect GND to the board's GND pin. (*Avoid connecting +V to the board's +5V pin* - you will likely overload the thermistor, and you will limit your maximum brightness.)
+
+ <img src="https://i.imgur.com/jd7qivh.png" width="300">
+
+2. Connect DI to PB0.
+
+ <img src="https://i.imgur.com/BiMyMLv.jpg" width="300">
+
+3. Should look something like this when finished:
+
+ <img src="https://i.imgur.com/ngxYMuA.jpg" width="600">
+
+*Optional:* To allow considerably more light to escape, consider angling the strip outwards by using some sort of fulcrum under the strip. (I used a thick wire.)
+
+## B. Enabling the strip
+1. If it is not present already, add the following to your ***keymap's*** ```Makefile```:
+
+ ```Makefile
+ RGBLIGHT_ENABLE = yes
+ AUDIO_ENABLE = no #Underglow animations cannot be used with audio.
+ ```
+2. If it is not present already, add the following to your *keymap's* ```config.h```, and edit the values as necessary:
+
+ ```c
+ // Set up RGB underglow.
+ #define RGB_DI_PIN B0 // The pin your RGB strip is wired to
+ #define RGBLIGHT_ANIMATIONS // Require for fancier stuff (not compatible with audio)
+ #define RGBLED_NUM 35 // Number of LEDs
+ #define RGBLIGHT_HUE_STEP 5 // How much each press of rgb_hue changes hue
+ #define RGBLIGHT_SAT_STEP 10 // How much each press of rgb_sat changes sat
+ #define RGBLIGHT_VAL_STEP 10 // How much each press of rgb_val changes val
+ ```
+3. If they are not present already, add the following keycodes to your keymap to control the RGB strip: ```RGB_TOG``` (on/off), ```RGB_MOD``` (step through modes), ```RGB_HUI```, ```RGB_HUD```, ```RGB_SAI```, ```RGB_SAD```, ```RGB_VAI```, ```RGB_VAD``` (HSV increase/decrease). Add these to your keymap.
+
+## C. Dealing with current limits
+USB 2.0 ports on laptops provide up to 500mA max, but USB 3.0 ports can provide up to 900mA; USB 3.1 up to 1.5A; and powered USB hubs even more. We can run our keyboard at a higher brightness if we draw more power. **The Zeal60 uses 500mA at max brightness.** This means that **you have about 400mA remaining for the strip to use on a USB 3.0 port**; 1000mA free on a USB 3.1 port, so on and so forth.
+
+***Warning:*** **This means you will need to turn *off* your RGB strip before connecting to a USB 2.0 port**, as USB 2.0 cannot sustain the current necessary!
+
+1. If not present already, add the following to your keymap's ```config.h```. Change the numbers based on your needs. The ones below are safe underestimates.
+
+ ```c
+ // Enable current limiting for RGB underglow.
+ #define RGBSTRIP_CURRENT_LIMIT 400 // Strip current limit in mA. (USB amperage - 500mA for keyboard)
+ #define RGBSTRIP_MAX_CURRENT_PER_LIGHT 50 // mA per light when at max brightness.
+ ```
+ *Example:* I use a USB port capable of providing 1800 mA. The keyboard uses 500mA, so my personal value (in the `tusing` keymap) for `RGBSTRIP_CURRENT_LIMIT` is 1300. The particular WS2812B RGB strip I have uses a maximum of 60 mA per LED, so that is my personal value for `RGBSTRIP_MAX_CURRENT_PER_LIGHT`.
+2. Toggle on the LED strip (```RGB_TOG```) and step through animations (```RGB_MOD```) to test it out!
+
+## D. Sources and resources
+### A. Connecting the strip.
+* [In-depth description of connecting an RGB strip to the GH60](https://www.reddit.com/r/MechanicalKeyboards/comments/4d5or2/my_first_custom_build_satan_gh60_rbg_underglow_in/d1nz3o7/)
+* [32U4 Pinout](https://40.media.tumblr.com/93b6bbd4113418c2b45459bb177e67c5/tumblr_mi49a20QMB1s5t695o1_1280.png)
+* [Redditor describes connecting RGB strips on his Satan GH60](https://www.reddit.com/r/MechanicalKeyboards/comments/4hbjw4/finally_finished_my_satan_gh60_also_granite_o/d2qn8zx/?context=3)
+* [Another Redditor on RGB with the Satan GH60](https://www.reddit.com/r/MechanicalKeyboards/comments/4ewzdx/gh60_satan_with_the_rgb_mod/d251uu6/ )
+
+### B. Enabling the strip.
+* [QMK Wiki portion on underglow](https://github.com/jackhumbert/qmk_firmware/wiki#rgb-under-glow-mod)
+* [Planck ```Makefile```, ```config.h```, and ```keymap.c``` config example](https://github.com/jackhumbert/qmk_firmware/tree/master/keyboards/planck/keymaps/yang)
+* [Video demonstrating keycode functions and RGB modes on a KC60](https://www.youtube.com/watch?v=VKrpPAHlisY)
+
+### C. Dealing with current limits.
+* [Discussion of cutting jumpers and adding resistors to lower current from Zeal60](https://www.reddit.com/r/MechanicalKeyboards/comments/5hou92/photos_zeal60_lets_just_say_santa_came_early_this/db23qid/)
+* [A selection of 900mA-1.5A current hold fuses - look for an SMD 0805-sized fuse.](https://goo.gl/748avG)
+* [Video detailing technique to solder 0805 resistors](https://www.youtube.com/watch?v=PU7wLcuqc-I&t=123s&list=FLheMlKEVQ5cmVXazUt6HrxQ&index=2)
+* [QMK feature request to implement max power draw limits in ```config.h```](https://github.com/jackhumbert/qmk_firmware/issues/954)
+* [Commit enabling max power draw limits in ```config.h```](https://github.com/jackhumbert/qmk_firmware/commit/83e613ad239459582ae28f78b6c81535b9b138d7)
\ No newline at end of file
--- /dev/null
+#pragma once
+
+/* Enable/disable LEDs based on layout. */
+#undef RGB_BACKLIGHT_USE_SPLIT_BACKSPACE
+#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0
+
+#undef RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT
+#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0
+
+#undef RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT
+#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0
+
+#undef RGB_BACKLIGHT_USE_7U_SPACEBAR
+#define RGB_BACKLIGHT_USE_7U_SPACEBAR 0
+
+#undef RGB_BACKLIGHT_USE_ISO_ENTER
+#define RGB_BACKLIGHT_USE_ISO_ENTER 0
+
+#undef RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS
+#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0
+
+// Set up RGB underglow.
+#define RGB_DI_PIN B0 // The pin your RGB strip is wired to
+#define RGBLIGHT_ANIMATIONS // Require for fancier stuff (not compatible with audio)
+#define RGBLED_NUM 35 // Number of LEDs
+#define RGBLIGHT_HUE_STEP 5 // How much each press of rgb_hue changes hue
+#define RGBLIGHT_SAT_STEP 10 // How much each press of rgb_sat changes sat
+#define RGBLIGHT_VAL_STEP 10 // How much each press of rgb_val changes val
+
+// Enable current limiting for RGB underglow.
+#define RGBSTRIP_CURRENT_LIMIT 1300 // Strip current limit in mA. (USB amperage - 500mA for keyboard)
+#define RGBSTRIP_MAX_CURRENT_PER_LIGHT 40 // mA per light when at max brightness.
+
+// Scale brightnes according to BRIGHTNESS_CORRECTION_TABLE in quantum/rgblight.c.
+// This allows to mitigate uneven brightness from LED underglow strips.
+// #define LED_BRIGHTNESS_CORRECTION
--- /dev/null
+// Default layout for Zeal60
+#include QMK_KEYBOARD_H
+
+// For readability.
+#define _x_ KC_NO
+#define AUD_PRV LCTL(KC_MPRV) // Previous music track
+#define AUD_PLY LCTL(KC_MPLY) // Pause music
+#define AUD_NXT LCTL(KC_MNXT) // Next music track
+
+// Zeal60-specific keys:
+// EF_INC, EF_DEC, // next/previous backlight effect
+// H1_INC, H1_DEC, // Color 1 hue increase/decrease
+// S1_INC, S1_DEC, // Color 1 saturation increase/decrease
+// H2_INC, H2_DEC, // Color 2 hue increase/decrease
+// S2_INC, S2_DEC, // Color 2 saturation increase/decrease
+// BR_INC, BR_DEC, // backlight brightness increase/decrease
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+// Default layer: Pressing caps-lock momentarily switches to Layer 1.
+// This is the default layer. Pressing an empty keycode on another layer will take you here.
+ [0] = {
+ {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC},
+ {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS},
+ {MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, _x_ },
+ {KC_LSFT, _x_ , KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, _x_ },
+ {KC_LCTL, KC_LGUI, KC_LALT, _x_ , _x_ , _x_ , _x_ , KC_SPC, _x_ , _x_ , KC_LEFT, KC_UP, KC_DOWN, KC_RGHT}
+ },
+
+// Layer 1: Pressing enter switches to layer 2, where backlight controls live.
+// This is a momentary layer: once you let go of caps, you'll be back in layer 1.
+ [1] = {
+ {KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL },
+ {_______, KC_VOLD, KC_MUTE, KC_VOLU, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, KC_INS, KC_DEL, _______},
+ {_______, AUD_PRV, AUD_PLY, AUD_NXT, _______, _______, _______, _______, _______, _______, _______, _______, TO(2) , _x_ },
+ {KC_CAPS, _x_ , _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _x_ },
+ {KC_RCTL, KC_RGUI, KC_RALT, _x_ , _x_ , _x_ , _x_ , _______, _x_ , _x_ , KC_HOME, KC_PGUP, KC_PGDN, KC_END}
+ },
+
+// Layer 2: Zeal60 and backlight configuration. (Get here quickly by pressing Caps+Enter from Layer 1.)
+// This is a persistent layer. Get back to the default layer by pressing enter.
+ [2] = {
+ {RESET, EF_DEC, EF_INC, BR_DEC, BR_INC, ES_DEC, ES_INC, _______, _______, _______, _______, _______, _______, _______},
+ {_______, H1_DEC, H1_INC, S1_DEC, S1_INC, _______, _______, _______, _______, _______, _______, _______, _______, _______},
+ {_______, H2_DEC, H2_INC, S2_DEC, S2_INC, _______, _______, _______, _______, _______, _______, _______, TO(0) , _x_ },
+ {RGB_MOD, _x_ , RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, _______, _______, _______, _______, _______, _______, _______, _x_ },
+ {RGB_TOG, RGB_VAD, RGB_VAI, _x_ , _x_ , _x_ , _x_ , _______, _x_ , _x_ , _______, _______, _______, _______}
+ }
+};
--- /dev/null
+Zeal60
+====
+
+
+
+This is a 60% PCB with per-key RGB LEDs and supports ANSI, ISO, winkey/winkeyless bottom row, HHKB-layout (split right shift and backspace).
+
+Keyboard Maintainer: [Wilba](http://wilba.tech/) and on [github](https://github.com/Wilba6582)
+Hardware Supported: Zeal60 PCB Rev 0-3
+Hardware Availability: https://zealpc.net/collections/group-buy-pre-orders/products/zeal60rgb
+
+Make example for this keyboard (after setting up your build environment):
+
+ make wilba_tech/zeal60:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+
+RGB Backlight Configuration
+====
+
+A keymap (in the keymaps directory) can optionally configure which RGB backlight LEDs are used, depending on the needs of the layout, by adding a config.h file in the keymap's directory.
+The following #define symbols will enable/disable a feature using 1 or 0.
+
+ RGB_BACKLIGHT_USE_SPLIT_BACKSPACE
+
+Split backspace is being used, enables the right LED of the split backspace (the top-right corner)
+
+ RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT
+
+Split left shift is being used (i.e. ISO layout), enables the right LED of the split left shift (the ISO key)
+
+ RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT
+
+Split right shift is being used (i.e. HHKB style layouts), enables the right LED of the split right shift (the Fn key)
+
+ RGB_BACKLIGHT_USE_7U_SPACEBAR
+
+A 7U spacebar is being used, controls the LEDs under the right stabilizer (of 7U spacebar) and right Alt (if 6.25U spacebar).
+
+ RGB_BACKLIGHT_USE_ISO_ENTER
+
+An ISO Enter is being used. Only used to tweak the location of the LED being used under ANSI Enter/backslash
+
+ RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS
+
+Disables the LEDs under HHKB corner blockers, useful for transparent cases.
--- /dev/null
+
+
+# project specific files
+SRC = keyboards/wilba_tech/wt_main.c \
+ keyboards/wilba_tech/wt_rgb_backlight.c \
+ quantum/color.c \
+ drivers/issi/is31fl3731.c \
+ drivers/avr/i2c_master.c
+
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Boot Section
+BOOTLOADER = atmel-dfu
+
+# Do not put the microcontroller into power saving mode
+# when we get USB suspend event. We want it to keep updating
+# backlight effects.
+OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
+
+# Build Options
+# change to "no" to disable the options, or define them in the Makefile in
+# the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no # Audio output on port C6
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
+
+RAW_ENABLE = yes
+DYNAMIC_KEYMAP_ENABLE = yes
+CIE1931_CURVE = yes
+
+LAYOUTS = 60_ansi 60_iso 60_hhkb 60_ansi_split_bs_rshift
--- /dev/null
+/* Copyright 2017 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef RGB_BACKLIGHT_ZEAL60
+#error RGB_BACKLIGHT_ZEAL60 not defined, you done goofed somehao, brah
+#endif
--- /dev/null
+/* Copyright 2017 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+#include "keyboards/wilba_tech/wt_rgb_backlight_keycodes.h"
+#include "keyboards/wilba_tech/via_keycodes.h"
+
+#define XXX KC_NO
+
+#define LAYOUT_60_all( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \
+ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
+ K40, K41, K42, K47, K4A, K4B, K4C, K4D \
+) { \
+ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
+ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
+ { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \
+ { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \
+ { K40, K41, K42, XXX, XXX, XXX, XXX, K47, XXX, XXX, K4A, K4B, K4C, K4D } \
+}
+
+#define LAYOUT_60_ansi( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \
+ K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, \
+ K40, K41, K42, K47, K4A, K4B, K4C, K4D \
+) { \
+ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
+ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
+ { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, XXX }, \
+ { K30, XXX, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, XXX }, \
+ { K40, K41, K42, XXX, XXX, XXX, XXX, K47, XXX, XXX, K4A, K4B, K4C, K4D } \
+}
+
+#define LAYOUT_60_iso( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \
+ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, \
+ K40, K41, K42, K47, K4A, K4B, K4C, K4D \
+) { \
+ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
+ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
+ { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, XXX }, \
+ { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, XXX }, \
+ { K40, K41, K42, XXX, XXX, XXX, XXX, K47, XXX, XXX, K4A, K4B, K4C, K4D } \
+}
+
+#define LAYOUT_60_ansi_split_bs_rshift( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \
+ K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
+ K40, K41, K42, K47, K4A, K4B, K4C, K4D \
+) { \
+ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
+ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
+ { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \
+ { K30, XXX, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \
+ { K40, K41, K42, XXX, XXX, XXX, XXX, K47, XXX, XXX, K4A, K4B, K4C, K4D } \
+}
+
+#define LAYOUT_60_hhkb( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \
+ K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
+ K41, K42, K47, K4B, K4C \
+) { \
+ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
+ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
+ { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \
+ { K30, XXX, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \
+ { XXX, K41, K42, XXX, XXX, XXX, XXX, K47, XXX, XXX, XXX, K4B, K4C, XXX } \
+}
+
--- /dev/null
+/* Copyright 2017 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "config_common.h"
+
+// USB Device descriptor parameter
+#define VENDOR_ID 0x5A45 // ZealPC ("ZE")
+#define PRODUCT_ID 0x0065 // Zeal65
+#define DEVICE_VER 0x0001
+#define MANUFACTURER ZealPC
+#define PRODUCT Zeal65
+#define DESCRIPTION Zeal65
+
+// key matrix size
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+// Zeal60 PCB default pin-out
+#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
+#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 }
+#define UNUSED_PINS
+
+// IS31FL3731 driver
+#define DRIVER_COUNT 2
+#define DRIVER_LED_TOTAL 72
+
+// COL2ROW or ROW2COL
+#define DIODE_DIRECTION COL2ROW
+
+// Set 0 if debouncing isn't needed
+#define DEBOUNCE 5
+
+// Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap
+#define LOCKING_SUPPORT_ENABLE
+// Locking resynchronize hack
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+// disable debug print
+//#define NO_DEBUG
+
+// disable print
+//#define NO_PRINT
+
+// disable action features
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#define RGB_BACKLIGHT_ENABLED 1
+
+// This conditionally compiles the backlight code for Zeal65 specifics
+#define RGB_BACKLIGHT_ZEAL65
+
+// enable/disable LEDs based on layout
+#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0
+#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0 // Unused
+#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0 // Unused
+#define RGB_BACKLIGHT_USE_7U_SPACEBAR 1 // Used only for stab LED matching spacebar LED
+#define RGB_BACKLIGHT_USE_ISO_ENTER 0 // Unused
+#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0
+
+// disable backlight when USB suspended (PC sleep/hibernate/shutdown)
+#define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0
+
+// disable backlight after timeout in minutes, 0 = no timeout
+#define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0
+
+// the default brightness
+#define RGB_BACKLIGHT_BRIGHTNESS 255
+
+// the default effect (RGB test)
+#define RGB_BACKLIGHT_EFFECT 255
+
+// the default effect speed (0-3)
+#define RGB_BACKLIGHT_EFFECT_SPEED 0
+
+// the default color1 and color2
+#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 }
+#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 }
+
+// These define which keys in the matrix are alphas/mods
+// Used for backlight effects so colors are different for
+// alphas vs. mods
+// Each value is for a row, bit 0 is column 0
+// Alpha=0 Mod=1
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0b0110000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0b0100000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0b0101000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0111000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0111110000000011
+
+#define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+#define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+#define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+#define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+
+#define DYNAMIC_KEYMAP_LAYER_COUNT 4
+
+// EEPROM usage
+
+// TODO: refactor with new user EEPROM code (coming soon)
+#define EEPROM_MAGIC 0x451F
+#define EEPROM_MAGIC_ADDR 32
+// Bump this every time we change what we store
+// This will automatically reset the EEPROM with defaults
+// and avoid loading invalid data from the EEPROM
+#define EEPROM_VERSION 0x08
+#define EEPROM_VERSION_ADDR 34
+
+// Backlight config starts after EEPROM version
+#define RGB_BACKLIGHT_CONFIG_EEPROM_ADDR 35
+// Dynamic keymap starts after backlight config (35+31)
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 66
+// Dynamic macro starts after dynamic keymaps (66+(4*5*15*2)) = (66+600)
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 666
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 358
+#define DYNAMIC_KEYMAP_MACRO_COUNT 16
--- /dev/null
+{
+ "keyboard_name": "Zeal65",
+ "url": "https://zealpc.net",
+ "maintainer": "Wilba",
+ "bootloader": "atmel-dfu",
+ "width": 16,
+ "height": 5,
+ "layouts": {
+ "LAYOUT_65_split_bs": {
+ "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"Del", "x":14, "y":0}, {"label":"Home", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Backspace", "x":13.5, "y":1, "w":1.5}, {"label":"PgUp", "x":15, "y":1}, {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"PgDn", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"\u2191", "x":14, "y":3}, {"label":"End", "x":15, "y":3}, {"label":"Win", "x":0, "y":4, "w":1.5}, {"label":"Alt", "x":1.5, "y":4, "w":1.5}, {"x":3, "y":4, "w":7}, {"label":"Fn2", "x":10, "y":4, "w":1.5}, {"label":"Fn1", "x":11.5, "y":4, "w":1.5}, {"label":"\u2190", "x":13, "y":4}, {"label":"\u2193", "x":14, "y":4}, {"label":"\u2192", "x":15, "y":4}]
+ },
+ "LAYOUT_65_normie": {
+ "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Home", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"PgUp", "x":15, "y":1}, {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"PgDn", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"\u2191", "x":14, "y":3}, {"label":"End", "x":15, "y":3}, {"label":"Win", "x":0, "y":4, "w":1.5}, {"label":"Alt", "x":1.5, "y":4, "w":1.5}, {"x":3, "y":4, "w":7}, {"label":"Fn2", "x":10, "y":4, "w":1.5}, {"label":"Fn1", "x":11.5, "y":4, "w":1.5}, {"label":"\u2190", "x":13, "y":4}, {"label":"\u2193", "x":14, "y":4}, {"label":"\u2192", "x":15, "y":4}]
+ }
+ }
+}
\ No newline at end of file
--- /dev/null
+#pragma once
+
+/* enable/disable LEDs based on layout */
+#undef RGB_BACKLIGHT_USE_SPLIT_BACKSPACE
+#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0
--- /dev/null
+// Default layout for Zeal65
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+// Default layer
+[0] = LAYOUT_65_normie(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END,
+ KC_LCTL, KC_LALT, KC_SPC, FN_MO23, FN_MO13, KC_LEFT, KC_DOWN, KC_RGHT),
+
+// Fn1 Layer
+[1] = LAYOUT_65_normie(
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+// Fn2 Layer
+[2] = LAYOUT_65_normie(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+// Fn3 Layer (zeal60 Configuration)
+[3] = LAYOUT_65_normie(
+ KC_TRNS, EF_DEC, EF_INC, H1_DEC, H1_INC, H2_DEC, H2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BR_DEC, BR_INC, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, S1_DEC, S1_INC, S2_DEC, S2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+};
--- /dev/null
+#pragma once
+
+/* enable/disable LEDs based on layout */
+#undef RGB_BACKLIGHT_USE_SPLIT_BACKSPACE
+#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 1
--- /dev/null
+// Split-backspace layout for Zeal65
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+// Default layer
+[0] = LAYOUT_65_split_bs(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_DEL, KC_HOME,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_PGUP,
+ KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END,
+ KC_LGUI, KC_LALT, KC_SPC, FN_MO23, FN_MO13, KC_LEFT, KC_DOWN, KC_RGHT),
+
+// Fn1 Layer
+[1] = LAYOUT_65_split_bs(
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, KC_TRNS,
+ KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+// Fn2 Layer
+[2] = LAYOUT_65_split_bs(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+// Fn3 Layer (zeal60 Configuration)
+[3] = LAYOUT_65_split_bs(
+ KC_TRNS, EF_DEC, EF_INC, H1_DEC, H1_INC, H2_DEC, H2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BR_DEC, BR_INC, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, S1_DEC, S1_INC, S2_DEC, S2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+};
--- /dev/null
+Zeal65
+====
+
+
+
+This is a 65% PCB with per-key RGB LEDs and supports fixed, 1800-like bottom row and split backspace. It was designed for the Zephyr custom keyboard.
+
+Keyboard Maintainer: [Wilba](http://wilba.tech/) and on [github](https://github.com/Wilba6582)
+Hardware Supported: Zeal65 PCB Rev 1
+Hardware Availability: https://zealpc.net/collections/group-buy-pre-orders/products/zephyr
+
+Make example for this keyboard (after setting up your build environment):
+
+ make wilba_tech/zeal65:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
--- /dev/null
+
+
+# project specific files
+SRC = keyboards/wilba_tech/wt_main.c \
+ keyboards/wilba_tech/wt_rgb_backlight.c \
+ quantum/color.c \
+ drivers/issi/is31fl3731.c \
+ drivers/avr/i2c_master.c
+
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Boot Section
+BOOTLOADER = atmel-dfu
+
+# Do not put the microcontroller into power saving mode
+# when we get USB suspend event. We want it to keep updating
+# backlight effects.
+OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
+
+# Build Options
+# change to "no" to disable the options, or define them in the Makefile in
+# the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no # Audio output on port C6
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+
+RAW_ENABLE = yes
+DYNAMIC_KEYMAP_ENABLE = yes
+CIE1931_CURVE = yes
--- /dev/null
+/* Copyright 2017 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef RGB_BACKLIGHT_ZEAL65
+#error RGB_BACKLIGHT_ZEAL65 not defined, you done goofed somehao, brah
+#endif
--- /dev/null
+/* Copyright 2017 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+#include "keyboards/wilba_tech/wt_rgb_backlight_keycodes.h"
+#include "keyboards/wilba_tech/via_keycodes.h"
+
+#define XXX KC_NO
+
+#define LAYOUT_65_split_bs( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D, K0E, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2E, \
+ K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \
+ K40, K41, K47, K4A, K4B, K4C, K4D, K4E \
+) { \
+ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \
+ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \
+ { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E }, \
+ { K30, XXX, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \
+ { K40, K41, XXX, XXX, XXX, XXX, XXX, K47, XXX, XXX, K4A, K4B, K4C, K4D, K4E } \
+}
+
+#define LAYOUT_65_normie( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2E, \
+ K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \
+ K40, K41, K47, K4A, K4B, K4C, K4D, K4E \
+) { \
+ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \
+ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \
+ { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, XXX, K2E }, \
+ { K30, XXX, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \
+ { K40, K41, XXX, XXX, XXX, XXX, XXX, K47, XXX, XXX, K4A, K4B, K4C, K4D, K4E } \
+}
+++ /dev/null
-/* Copyright 2017 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#pragma once
-
-#include "config_common.h"
-
-// USB Device descriptor parameter
-#define VENDOR_ID 0x5A45 // ZealPC ("ZE")
-#define PRODUCT_ID 0x0060 // Zeal60
-#define DEVICE_VER 0x0001
-#define MANUFACTURER ZealPC
-#define PRODUCT Zeal60
-#define DESCRIPTION Zeal60
-
-// key matrix size
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 14
-
-// Zeal60 PCB default pin-out
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 }
-#define UNUSED_PINS
-
-// IS31FL3731 driver
-#define DRIVER_COUNT 2
-#define DRIVER_LED_TOTAL 72
-
-// COL2ROW or ROW2COL
-#define DIODE_DIRECTION COL2ROW
-
-// Set 0 if debouncing isn't needed
-#define DEBOUNCE 5
-
-// Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap
-#define LOCKING_SUPPORT_ENABLE
-// Locking resynchronize hack
-#define LOCKING_RESYNC_ENABLE
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-// disable debug print
-//#define NO_DEBUG
-
-// disable print
-//#define NO_PRINT
-
-// disable action features
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-#define RGB_BACKLIGHT_ENABLED 1
-
-// This conditionally compiles the backlight code for Zeal60 specifics
-#define RGB_BACKLIGHT_ZEAL60
-
-// enable/disable LEDs based on layout
-#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0
-#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0
-#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0
-#define RGB_BACKLIGHT_USE_7U_SPACEBAR 0
-#define RGB_BACKLIGHT_USE_ISO_ENTER 0
-#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0
-
-// disable backlight when USB suspended (PC sleep/hibernate/shutdown)
-#define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0
-
-// disable backlight after timeout in minutes, 0 = no timeout
-#define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0
-
-// the default brightness
-#define RGB_BACKLIGHT_BRIGHTNESS 255
-
-// the default effect (RGB test)
-#define RGB_BACKLIGHT_EFFECT 255
-
-// the default effect speed (0-3)
-#define RGB_BACKLIGHT_EFFECT_SPEED 0
-
-// the default color1 and color2
-#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 }
-#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 }
-
-// These define which keys in the matrix are alphas/mods
-// Used for backlight effects so colors are different for
-// alphas vs. mods
-// Each value is for a row, bit 0 is column 0
-// Alpha=0 Mod=1
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0b0010000000000001
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0b0000000000000001
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0b0001000000000001
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0011000000000001
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0011110000000111
-
-#define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
-#define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
-#define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
-#define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
-
-#define DYNAMIC_KEYMAP_LAYER_COUNT 4
-
-// EEPROM usage
-
-// TODO: refactor with new user EEPROM code (coming soon)
-#define EEPROM_MAGIC 0x451F
-#define EEPROM_MAGIC_ADDR 32
-// Bump this every time we change what we store
-// This will automatically reset the EEPROM with defaults
-// and avoid loading invalid data from the EEPROM
-#define EEPROM_VERSION 0x08
-#define EEPROM_VERSION_ADDR 34
-
-// Backlight config starts after EEPROM version
-#define RGB_BACKLIGHT_CONFIG_EEPROM_ADDR 35
-// Dynamic keymap starts after backlight config (35+31)
-#define DYNAMIC_KEYMAP_EEPROM_ADDR 66
-// Dynamic macro starts after dynamic keymaps (66+(4*5*14*2)) = (66+560)
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 626
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 398
-#define DYNAMIC_KEYMAP_MACRO_COUNT 16
+++ /dev/null
-{
- "keyboard_name": "Zeal60",
- "url": "",
- "maintainer": "Wilba",
- "bootloader": "DFU",
- "width": 15,
- "height": 5,
- "layouts": {
- "LAYOUT_all": {
- "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
- },
- "LAYOUT_60_ansi": {
- "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
- },
- "LAYOUT_60_iso": {
- "layout": [{"label":"\u00ac", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"\"", "x":2, "y":0}, {"label":"\u00a3", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"@", "x":11.75, "y":2}, {"label":"~", "x":12.75, "y":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"AltGr", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
- },
- "LAYOUT_60_ansi_split_bs_rshift": {
- "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
- },
- "LAYOUT_60_hhkb": {
- "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"~", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Delete", "x":13.5, "y":1, "w":1.5}, {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Os", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Alt", "x":11, "y":4, "w":1.5}, {"label":"Os", "x":12.5, "y":4}]
- }
- }
-}
\ No newline at end of file
+++ /dev/null
-#pragma once
-
-/* enable/disable LEDs based on layout */
-#undef RGB_BACKLIGHT_USE_SPLIT_BACKSPACE
-#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0
-
-#undef RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT
-#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0
-
-#undef RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT
-#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0
-
-#undef RGB_BACKLIGHT_USE_7U_SPACEBAR
-#define RGB_BACKLIGHT_USE_7U_SPACEBAR 0
-
-#undef RGB_BACKLIGHT_USE_ISO_ENTER
-#define RGB_BACKLIGHT_USE_ISO_ENTER 0
-
-#undef RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS
-#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0
-
+++ /dev/null
-// ANSI split backspace/right shift layout for Zeal60
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-// Default layer
-[0] = LAYOUT_60_ansi_split_bs_rshift(
- KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_DEL,
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,
- KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
- KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, FN_MO13,
- KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, FN_MO23, KC_RCTL),
-
-// Fn1 Layer
-[1] = LAYOUT_60_ansi_split_bs_rshift(
- KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL,
- KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_EJCT, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
-// Fn2 Layer
-[2] = LAYOUT_60_ansi_split_bs_rshift(
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
-// Fn3 Layer (zeal60 Configuration)
-[3] = LAYOUT_60_ansi_split_bs_rshift(
- KC_TRNS, EF_DEC, EF_INC, H1_DEC, H1_INC, H2_DEC, H2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BR_DEC, BR_INC, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, S1_DEC, S1_INC, S2_DEC, S2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, ES_DEC, ES_INC, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
-};
+++ /dev/null
-#pragma once
-
-/* enable/disable LEDs based on layout */
-#undef RGB_BACKLIGHT_USE_SPLIT_BACKSPACE
-#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0
-
-#undef RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT
-#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0
-
-#undef RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT
-#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 1
-
-#undef RGB_BACKLIGHT_USE_7U_SPACEBAR
-#define RGB_BACKLIGHT_USE_7U_SPACEBAR 1
-
-#undef RGB_BACKLIGHT_USE_ISO_ENTER
-#define RGB_BACKLIGHT_USE_ISO_ENTER 0
-
-#undef RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS
-#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0
-
-#undef RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED
-#define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 1
-
-#undef RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT
-#define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 3
-
-#undef RGB_BACKLIGHT_EFFECT
-#define RGB_BACKLIGHT_EFFECT 0
\ No newline at end of file
+++ /dev/null
-// tsangan layout for Zeal60
-#include QMK_KEYBOARD_H
-
-enum keyboard_layers {
- _BL = 0, // Base Layer
- _FL, // Function Layer
- _CL // Control Layer
-};
-
-// Custom #defined keycodes (shorter macros for readability)
-#define KC_CTES CTL_T(KC_ESC)
-#define KC_RSUP RSFT_T(KC_UP)
-#define KC_RGLT RCMD_T(KC_LEFT)
-#define KC_RADN LT(_CL, KC_DOWN)
-#define KC_RCRT RCTL_T(KC_RIGHT)
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- [_BL] = LAYOUT_60_ansi_split_bs_rshift(
- KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, XXXXXXX,
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
- KC_CTES, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
- KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSUP, MO(_FL),
- KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, XXXXXXX, KC_RGLT, KC_RADN, KC_RCRT
- ),
- [_FL] = LAYOUT_60_ansi_split_bs_rshift(
- KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, _______,
- _______, KC_HOME, KC_UP, KC_END, _______, _______, _______, _______, KC_MUTE, _______, _______, KC_PGDN, KC_PGUP, _______,
- _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, KC_SLCK, KC_VOLD, KC_VOLU, KC_PAUS, _______, _______, _______,
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
- _______, _______, _______, _______, _______, _______, _______, _______
- ),
- [_CL] = LAYOUT_60_ansi_split_bs_rshift(
- _______, EF_DEC, EF_INC, H1_DEC, H1_INC, H2_DEC, H2_INC, _______, _______, _______, _______, BR_DEC, BR_INC, _______, _______,
- _______, _______, _______, S1_DEC, S1_INC, S2_DEC, S2_INC, _______, _______, _______, _______, ES_DEC, ES_INC, RESET,
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
- _______, _______, _______, _______, _______, _______, _______, _______
- ),
-};
+++ /dev/null
-#pragma once
-
-/* enable/disable LEDs based on layout */
-#undef RGB_BACKLIGHT_USE_SPLIT_BACKSPACE
-#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0
-
-#undef RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT
-#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0
-
-#undef RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT
-#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0
-
-#undef RGB_BACKLIGHT_USE_7U_SPACEBAR
-#define RGB_BACKLIGHT_USE_7U_SPACEBAR 0
-
-#undef RGB_BACKLIGHT_USE_ISO_ENTER
-#define RGB_BACKLIGHT_USE_ISO_ENTER 0
-
-#undef RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS
-#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0
+++ /dev/null
-// Default layout for Zeal60
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-// Default layer
-[0] = LAYOUT_60_ansi(
- KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
- KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
- KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
- KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, FN_MO13, FN_MO23, KC_RCTL),
-
-// Fn1 Layer
-[1] = LAYOUT_60_ansi(
- KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL ,
- KC_CAPS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS,
- KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_END, KC_PGDN, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
-// Fn2 Layer
-[2] = LAYOUT_60_ansi(
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
-// Fn3 Layer (zeal60 Configuration)
-[3] = LAYOUT_60_ansi(
- KC_TRNS, EF_DEC, EF_INC, H1_DEC, H1_INC, H2_DEC, H2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BR_DEC, BR_INC, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, S1_DEC, S1_INC, S2_DEC, S2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, ES_DEC, ES_INC, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
-};
+++ /dev/null
-#pragma once
-
-/* enable/disable LEDs based on layout */
-#undef RGB_BACKLIGHT_USE_SPLIT_BACKSPACE
-#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 1
-
-#undef RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT
-#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0
-
-#undef RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT
-#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 1
-
-#undef RGB_BACKLIGHT_USE_7U_SPACEBAR
-#define RGB_BACKLIGHT_USE_7U_SPACEBAR 1
-
-#undef RGB_BACKLIGHT_USE_ISO_ENTER
-#define RGB_BACKLIGHT_USE_ISO_ENTER 0
-
-#undef RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS
-#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 1
+++ /dev/null
-// HHKB layout for Zeal60
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-// Default layer
-[0] = LAYOUT_60_hhkb(
- KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV,
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,
- KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
- KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, FN_MO13,
- KC_LGUI, KC_LALT, KC_SPC, KC_RALT, FN_MO23),
-
-// Fn1 Layer
-[1] = LAYOUT_60_hhkb(
- KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL,
- KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_EJCT, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
-// Fn2 Layer
-[2] = LAYOUT_60_hhkb(
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
-// Fn3 Layer (zeal60 Configuration)
-[3] = LAYOUT_60_hhkb(
- KC_TRNS, EF_DEC, EF_INC, H1_DEC, H1_INC, H2_DEC, H2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BR_DEC, BR_INC, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, S1_DEC, S1_INC, S2_DEC, S2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, ES_DEC, ES_INC, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
-};
+++ /dev/null
-#pragma once
-
-/* enable/disable LEDs based on layout */
-#undef RGB_BACKLIGHT_USE_SPLIT_BACKSPACE
-#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0
-
-#undef RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT
-#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 1
-
-#undef RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT
-#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0
-
-#undef RGB_BACKLIGHT_USE_7U_SPACEBAR
-#define RGB_BACKLIGHT_USE_7U_SPACEBAR 0
-
-#undef RGB_BACKLIGHT_USE_ISO_ENTER
-#define RGB_BACKLIGHT_USE_ISO_ENTER 1
-
-#undef RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS
-#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0
+++ /dev/null
-// ISO layout for Zeal60
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-// Default layer
-[0] = LAYOUT_60_iso(
- KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_ENT,
- KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS,
- KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
- KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, FN_MO13, FN_MO23, KC_RCTL),
-
-// Fn1 Layer
-[1] = LAYOUT_60_iso(
- KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL ,
- KC_CAPS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS,
- KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_END, KC_PGDN, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
-// Fn2 Layer
-[2] = LAYOUT_60_iso(
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
-// Fn3 Layer (zeal60 Configuration)
-[3] = LAYOUT_60_iso(
- KC_TRNS, EF_DEC, EF_INC, H1_DEC, H1_INC, H2_DEC, H2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BR_DEC, BR_INC, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, S1_DEC, S1_INC, S2_DEC, S2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, ES_DEC, ES_INC, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
-};
+++ /dev/null
-#pragma once
-
-/* enable/disable LEDs based on layout */
-#undef RGB_BACKLIGHT_USE_SPLIT_BACKSPACE
-#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 1
-
-#undef RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT
-#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0
-
-#undef RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT
-#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 1
-
-#undef RGB_BACKLIGHT_USE_7U_SPACEBAR
-#define RGB_BACKLIGHT_USE_7U_SPACEBAR 0
-
-#undef RGB_BACKLIGHT_USE_ISO_ENTER
-#define RGB_BACKLIGHT_USE_ISO_ENTER 0
-
-#undef RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS
-#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0
-
+++ /dev/null
-// Ryan MacLean's layout for Zeal60
-// Note that LGUI and RGUI are swapped with LALT and RALT respectively, for use with Macs
-// Also note that Control has replaced Caps Lock, and that pressing left or right shift once
-// will output left parenthese and right parenthese respectively.
-#include QMK_KEYBOARD_H
-
-// [0,13] is either left key of split backspace (e.g. HHKB \| key) or 2U backspace
-// [1,13] is either backslash or ISO Enter
-// [2,12] is either ANSI Enter or key left of ISO Enter
-// [2,13] is right key of split backspace (e.g. HHKB `~ key)
-// [3,1] is right key of split left-shift (e.g ISO key)
-// [3,13] is right key of split right-shift (e.g. HHKB Fn key)
-
-
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) // this is the function signature -- just copy/paste it into your keymap file as it is. KC_LSFT KC_LALT KC_LGUI KC_4
-{
- switch(id) {
- case 0: // macOS screenshot to capture are to clipboard - this would trigger when you hit a key mapped as M(0)
- if (record->event.pressed) {
- return MACRO( D(LSFT), D(LCTL), D(LGUI), T(4), U(LSFT), U(LCTL), U(LGUI), W(255), END ); // this sends the string 'hello' when the macro executes
- }
- break;
- case 1: // macOS screenshot capture area to file - this would trigger when you hit a key mapped as M(1)
- if (record->event.pressed) {
- return MACRO( D(LSFT), D(LGUI), T(4), U(LSFT), U(LGUI), W(255), END ); // this sends the string 'hello' when the macro executes
- }
- break;
- case 2: // macOS screenshot to clipboard - this would trigger when you hit a key mapped as M(2)
- if (record->event.pressed) {
- return MACRO( D(LSFT), D(LCTL), D(LGUI), T(3), U(LSFT), U(LCTL), U(LGUI), W(255), END ); // this sends the string 'hello' when the macro executes
- }
- break;
- case 3: // macOS screenshot to file - this would trigger when you hit a key mapped as M(3)
- if (record->event.pressed) {
- return MACRO( D(LSFT), D(LGUI), T(3), U(LSFT), U(LGUI), W(255), END ); // this sends the string 'hello' when the macro executes
- }
- break;
- }
- return MACRO_NONE;
-};
-
-#define CADETL MT(KC_LSFT, KC_LBRC)
-#define CADETR MT(KC_RSFT, KC_RBRC)
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-// Default layer
-[0] = {
- {KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS},
- {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC},
- {KC_LGUI, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_GRV},
- {KC_LSPO, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC, FN_MO13},
- {KC_LCTL, KC_LALT, KC_LGUI, KC_NO, KC_NO, KC_NO, KC_NO, KC_SPC, KC_NO, KC_NO, KC_RGUI, KC_RALT, KC_RCTL, FN_MO23}
-},
-
-// Fn1 Layer
-[1] = {
- {KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS},
- {KC_CAPS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_DEL},
- {KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_LEFT, KC_UP, KC_DOWN, KC_RGHT, KC_HOME, KC_PGUP, KC_TRNS, KC_TRNS},
- {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_END, KC_PGDN, KC_TRNS, KC_TRNS},
- {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}
-},
-
-// Fn2 Layer
-[2] = {
- {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
- {KC_TRNS, M(2), M(3), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
- {KC_TRNS, M(1), M(0), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
- {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
- {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}
-},
-
-// Fn3 Layer (zeal60 Configuration)
-[3] = {
- {KC_TRNS, EF_DEC, EF_INC, H1_DEC, H1_INC, H2_DEC, H2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BR_DEC, BR_INC, KC_TRNS},
- {KC_TRNS, KC_TRNS, KC_TRNS, S1_DEC, S1_INC, S2_DEC, S2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
- {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
- {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
- {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}
-}
-
-};
+++ /dev/null
-# Build Options
-# change to "no" to disable the options, or define them in the Makefile in
-# the appropriate keymap folder that will get included automatically
-#
-RGBLIGHT_ENABLE = yes
-AUDIO_ENABLE = no # Underglow cannot be used with audio.
+++ /dev/null
-# RGB Underglow Strip on the Zeal60: A Guide
-
-<img src="https://i.imgur.com/UuUdOCb.jpg" width="800">
-
-## Requirements
-
-- WS2812B RGB strip, preferably 60 LEDs/meter
-- Wire, solder
-- Tape, hot glue, or some sort of adhesive
-
-## A. Connecting the strip
-You might find the [**full PCB image**](https://cdn.shopify.com/s/files/1/0490/7329/files/zeal60jumpers.png) helpful. Ignore the red boxes!
-
-1. Connect V+ to the receiving end of the thermistor labeled F1; connect GND to the board's GND pin. (*Avoid connecting +V to the board's +5V pin* - you will likely overload the thermistor, and you will limit your maximum brightness.)
-
- <img src="https://i.imgur.com/jd7qivh.png" width="300">
-
-2. Connect DI to PB0.
-
- <img src="https://i.imgur.com/BiMyMLv.jpg" width="300">
-
-3. Should look something like this when finished:
-
- <img src="https://i.imgur.com/ngxYMuA.jpg" width="600">
-
-*Optional:* To allow considerably more light to escape, consider angling the strip outwards by using some sort of fulcrum under the strip. (I used a thick wire.)
-
-## B. Enabling the strip
-1. If it is not present already, add the following to your ***keymap's*** ```Makefile```:
-
- ```Makefile
- RGBLIGHT_ENABLE = yes
- AUDIO_ENABLE = no #Underglow animations cannot be used with audio.
- ```
-2. If it is not present already, add the following to your *keymap's* ```config.h```, and edit the values as necessary:
-
- ```c
- // Set up RGB underglow.
- #define RGB_DI_PIN B0 // The pin your RGB strip is wired to
- #define RGBLIGHT_ANIMATIONS // Require for fancier stuff (not compatible with audio)
- #define RGBLED_NUM 35 // Number of LEDs
- #define RGBLIGHT_HUE_STEP 5 // How much each press of rgb_hue changes hue
- #define RGBLIGHT_SAT_STEP 10 // How much each press of rgb_sat changes sat
- #define RGBLIGHT_VAL_STEP 10 // How much each press of rgb_val changes val
- ```
-3. If they are not present already, add the following keycodes to your keymap to control the RGB strip: ```RGB_TOG``` (on/off), ```RGB_MOD``` (step through modes), ```RGB_HUI```, ```RGB_HUD```, ```RGB_SAI```, ```RGB_SAD```, ```RGB_VAI```, ```RGB_VAD``` (HSV increase/decrease). Add these to your keymap.
-
-## C. Dealing with current limits
-USB 2.0 ports on laptops provide up to 500mA max, but USB 3.0 ports can provide up to 900mA; USB 3.1 up to 1.5A; and powered USB hubs even more. We can run our keyboard at a higher brightness if we draw more power. **The Zeal60 uses 500mA at max brightness.** This means that **you have about 400mA remaining for the strip to use on a USB 3.0 port**; 1000mA free on a USB 3.1 port, so on and so forth.
-
-***Warning:*** **This means you will need to turn *off* your RGB strip before connecting to a USB 2.0 port**, as USB 2.0 cannot sustain the current necessary!
-
-1. If not present already, add the following to your keymap's ```config.h```. Change the numbers based on your needs. The ones below are safe underestimates.
-
- ```c
- // Enable current limiting for RGB underglow.
- #define RGBSTRIP_CURRENT_LIMIT 400 // Strip current limit in mA. (USB amperage - 500mA for keyboard)
- #define RGBSTRIP_MAX_CURRENT_PER_LIGHT 50 // mA per light when at max brightness.
- ```
- *Example:* I use a USB port capable of providing 1800 mA. The keyboard uses 500mA, so my personal value (in the `tusing` keymap) for `RGBSTRIP_CURRENT_LIMIT` is 1300. The particular WS2812B RGB strip I have uses a maximum of 60 mA per LED, so that is my personal value for `RGBSTRIP_MAX_CURRENT_PER_LIGHT`.
-2. Toggle on the LED strip (```RGB_TOG```) and step through animations (```RGB_MOD```) to test it out!
-
-## D. Sources and resources
-### A. Connecting the strip.
-* [In-depth description of connecting an RGB strip to the GH60](https://www.reddit.com/r/MechanicalKeyboards/comments/4d5or2/my_first_custom_build_satan_gh60_rbg_underglow_in/d1nz3o7/)
-* [32U4 Pinout](https://40.media.tumblr.com/93b6bbd4113418c2b45459bb177e67c5/tumblr_mi49a20QMB1s5t695o1_1280.png)
-* [Redditor describes connecting RGB strips on his Satan GH60](https://www.reddit.com/r/MechanicalKeyboards/comments/4hbjw4/finally_finished_my_satan_gh60_also_granite_o/d2qn8zx/?context=3)
-* [Another Redditor on RGB with the Satan GH60](https://www.reddit.com/r/MechanicalKeyboards/comments/4ewzdx/gh60_satan_with_the_rgb_mod/d251uu6/ )
-
-### B. Enabling the strip.
-* [QMK Wiki portion on underglow](https://github.com/jackhumbert/qmk_firmware/wiki#rgb-under-glow-mod)
-* [Planck ```Makefile```, ```config.h```, and ```keymap.c``` config example](https://github.com/jackhumbert/qmk_firmware/tree/master/keyboards/planck/keymaps/yang)
-* [Video demonstrating keycode functions and RGB modes on a KC60](https://www.youtube.com/watch?v=VKrpPAHlisY)
-
-### C. Dealing with current limits.
-* [Discussion of cutting jumpers and adding resistors to lower current from Zeal60](https://www.reddit.com/r/MechanicalKeyboards/comments/5hou92/photos_zeal60_lets_just_say_santa_came_early_this/db23qid/)
-* [A selection of 900mA-1.5A current hold fuses - look for an SMD 0805-sized fuse.](https://goo.gl/748avG)
-* [Video detailing technique to solder 0805 resistors](https://www.youtube.com/watch?v=PU7wLcuqc-I&t=123s&list=FLheMlKEVQ5cmVXazUt6HrxQ&index=2)
-* [QMK feature request to implement max power draw limits in ```config.h```](https://github.com/jackhumbert/qmk_firmware/issues/954)
-* [Commit enabling max power draw limits in ```config.h```](https://github.com/jackhumbert/qmk_firmware/commit/83e613ad239459582ae28f78b6c81535b9b138d7)
\ No newline at end of file
+++ /dev/null
-#pragma once
-
-/* Enable/disable LEDs based on layout. */
-#undef RGB_BACKLIGHT_USE_SPLIT_BACKSPACE
-#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0
-
-#undef RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT
-#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0
-
-#undef RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT
-#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0
-
-#undef RGB_BACKLIGHT_USE_7U_SPACEBAR
-#define RGB_BACKLIGHT_USE_7U_SPACEBAR 0
-
-#undef RGB_BACKLIGHT_USE_ISO_ENTER
-#define RGB_BACKLIGHT_USE_ISO_ENTER 0
-
-#undef RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS
-#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0
-
-// Set up RGB underglow.
-#define RGB_DI_PIN B0 // The pin your RGB strip is wired to
-#define RGBLIGHT_ANIMATIONS // Require for fancier stuff (not compatible with audio)
-#define RGBLED_NUM 35 // Number of LEDs
-#define RGBLIGHT_HUE_STEP 5 // How much each press of rgb_hue changes hue
-#define RGBLIGHT_SAT_STEP 10 // How much each press of rgb_sat changes sat
-#define RGBLIGHT_VAL_STEP 10 // How much each press of rgb_val changes val
-
-// Enable current limiting for RGB underglow.
-#define RGBSTRIP_CURRENT_LIMIT 1300 // Strip current limit in mA. (USB amperage - 500mA for keyboard)
-#define RGBSTRIP_MAX_CURRENT_PER_LIGHT 40 // mA per light when at max brightness.
-
-// Scale brightnes according to BRIGHTNESS_CORRECTION_TABLE in quantum/rgblight.c.
-// This allows to mitigate uneven brightness from LED underglow strips.
-// #define LED_BRIGHTNESS_CORRECTION
+++ /dev/null
-// Default layout for Zeal60
-#include QMK_KEYBOARD_H
-
-// For readability.
-#define _x_ KC_NO
-#define AUD_PRV LCTL(KC_MPRV) // Previous music track
-#define AUD_PLY LCTL(KC_MPLY) // Pause music
-#define AUD_NXT LCTL(KC_MNXT) // Next music track
-
-// Zeal60-specific keys:
-// EF_INC, EF_DEC, // next/previous backlight effect
-// H1_INC, H1_DEC, // Color 1 hue increase/decrease
-// S1_INC, S1_DEC, // Color 1 saturation increase/decrease
-// H2_INC, H2_DEC, // Color 2 hue increase/decrease
-// S2_INC, S2_DEC, // Color 2 saturation increase/decrease
-// BR_INC, BR_DEC, // backlight brightness increase/decrease
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-// Default layer: Pressing caps-lock momentarily switches to Layer 1.
-// This is the default layer. Pressing an empty keycode on another layer will take you here.
- [0] = {
- {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC},
- {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS},
- {MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, _x_ },
- {KC_LSFT, _x_ , KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, _x_ },
- {KC_LCTL, KC_LGUI, KC_LALT, _x_ , _x_ , _x_ , _x_ , KC_SPC, _x_ , _x_ , KC_LEFT, KC_UP, KC_DOWN, KC_RGHT}
- },
-
-// Layer 1: Pressing enter switches to layer 2, where backlight controls live.
-// This is a momentary layer: once you let go of caps, you'll be back in layer 1.
- [1] = {
- {KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL },
- {_______, KC_VOLD, KC_MUTE, KC_VOLU, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, KC_INS, KC_DEL, _______},
- {_______, AUD_PRV, AUD_PLY, AUD_NXT, _______, _______, _______, _______, _______, _______, _______, _______, TO(2) , _x_ },
- {KC_CAPS, _x_ , _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _x_ },
- {KC_RCTL, KC_RGUI, KC_RALT, _x_ , _x_ , _x_ , _x_ , _______, _x_ , _x_ , KC_HOME, KC_PGUP, KC_PGDN, KC_END}
- },
-
-// Layer 2: Zeal60 and backlight configuration. (Get here quickly by pressing Caps+Enter from Layer 1.)
-// This is a persistent layer. Get back to the default layer by pressing enter.
- [2] = {
- {RESET, EF_DEC, EF_INC, BR_DEC, BR_INC, ES_DEC, ES_INC, _______, _______, _______, _______, _______, _______, _______},
- {_______, H1_DEC, H1_INC, S1_DEC, S1_INC, _______, _______, _______, _______, _______, _______, _______, _______, _______},
- {_______, H2_DEC, H2_INC, S2_DEC, S2_INC, _______, _______, _______, _______, _______, _______, _______, TO(0) , _x_ },
- {RGB_MOD, _x_ , RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, _______, _______, _______, _______, _______, _______, _______, _x_ },
- {RGB_TOG, RGB_VAD, RGB_VAI, _x_ , _x_ , _x_ , _x_ , _______, _x_ , _x_ , _______, _______, _______, _______}
- }
-};
+++ /dev/null
-Zeal60
-====
-
-
-
-This is a 60% PCB with per-key RGB LEDs and supports ANSI, ISO, winkey/winkeyless bottom row, HHKB-layout (split right shift and backspace).
-
-Keyboard Maintainer: [Wilba](http://wilba.tech/) and on [github](https://github.com/Wilba6582)
-Hardware Supported: Zeal60 PCB Rev 0-3
-Hardware Availability: https://zealpc.net/collections/group-buy-pre-orders/products/zeal60rgb
-
-Make example for this keyboard (after setting up your build environment):
-
- make zeal60:default
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
-
-
-RGB Backlight Configuration
-====
-
-A keymap (in the keymaps directory) can optionally configure which RGB backlight LEDs are used, depending on the needs of the layout, by adding a config.h file in the keymap's directory.
-The following #define symbols will enable/disable a feature using 1 or 0.
-
- RGB_BACKLIGHT_USE_SPLIT_BACKSPACE
-
-Split backspace is being used, enables the right LED of the split backspace (the top-right corner)
-
- RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT
-
-Split left shift is being used (i.e. ISO layout), enables the right LED of the split left shift (the ISO key)
-
- RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT
-
-Split right shift is being used (i.e. HHKB style layouts), enables the right LED of the split right shift (the Fn key)
-
- RGB_BACKLIGHT_USE_7U_SPACEBAR
-
-A 7U spacebar is being used, controls the LEDs under the right stabilizer (of 7U spacebar) and right Alt (if 6.25U spacebar).
-
- RGB_BACKLIGHT_USE_ISO_ENTER
-
-An ISO Enter is being used. Only used to tweak the location of the LED being used under ANSI Enter/backslash
-
- RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS
-
-Disables the LEDs under HHKB corner blockers, useful for transparent cases.
+++ /dev/null
-/* Copyright 2017 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#if RGB_BACKLIGHT_ENABLED
-
-#if defined(RGB_BACKLIGHT_ZEAL60) || defined(RGB_BACKLIGHT_ZEAL65) || defined(RGB_BACKLIGHT_M60_A) || defined(RGB_BACKLIGHT_M6_B) || defined(RGB_BACKLIGHT_KOYU) || defined(RGB_BACKLIGHT_HS60) || defined(RGB_BACKLIGHT_NK65)
-#else
-#error None of the following was defined: RGB_BACKLIGHT_ZEAL60, RGB_BACKLIGHT_ZEAL65, RGB_BACKLIGHT_M60_A, RGB_BACKLIGHT_M6_B, RGB_BACKLIGHT_KOYU, RGB_BACKLIGHT_HS60, RGB_BACKLIGHT_NK65
-#endif
-
-#ifndef MAX
- #define MAX(X, Y) ((X) > (Y) ? (X) : (Y))
-#endif
-
-#ifndef MIN
- #define MIN(a,b) ((a) < (b)? (a): (b))
-#endif
-
-#include "quantum.h"
-#include "rgb_backlight.h"
-#include "rgb_backlight_api.h"
-#include "rgb_backlight_keycodes.h"
-
-#if !defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65)
-#include <avr/io.h>
-#include <util/delay.h>
-#include <avr/interrupt.h>
-#include "drivers/avr/i2c_master.h"
-#else
-#include "ch.h"
-#include "hal.h"
-#include "drivers/arm/i2c_master.h"
-#include "tmk_core/common/eeprom.h"
-#endif
-#include "progmem.h"
-#include "quantum/color.h"
-
-#if defined(RGB_BACKLIGHT_M6_B)
-#include "drivers/issi/is31fl3218.h"
-#define BACKLIGHT_LED_COUNT 6
-#elif defined(RGB_BACKLIGHT_HS60)
-#include "drivers/issi/is31fl3733.h"
-#define BACKLIGHT_LED_COUNT 64
-#elif defined(RGB_BACKLIGHT_NK65)
-#include "drivers/issi/is31fl3733.h"
-#define BACKLIGHT_LED_COUNT 69
-#else
-#include "drivers/issi/is31fl3731.h"
-#define BACKLIGHT_LED_COUNT 72
-#endif
-
-#define BACKLIGHT_EFFECT_MAX 10
-
-backlight_config g_config = {
- .use_split_backspace = RGB_BACKLIGHT_USE_SPLIT_BACKSPACE,
- .use_split_left_shift = RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT,
- .use_split_right_shift = RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT,
- .use_7u_spacebar = RGB_BACKLIGHT_USE_7U_SPACEBAR,
- .use_iso_enter = RGB_BACKLIGHT_USE_ISO_ENTER,
- .disable_hhkb_blocker_leds = RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS,
- .disable_when_usb_suspended = RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED,
- .disable_after_timeout = RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT,
- .brightness = RGB_BACKLIGHT_BRIGHTNESS,
- .effect = RGB_BACKLIGHT_EFFECT,
- .effect_speed = RGB_BACKLIGHT_EFFECT_SPEED,
- .color_1 = RGB_BACKLIGHT_COLOR_1,
- .color_2 = RGB_BACKLIGHT_COLOR_2,
- .caps_lock_indicator = RGB_BACKLIGHT_CAPS_LOCK_INDICATOR,
- .layer_1_indicator = RGB_BACKLIGHT_LAYER_1_INDICATOR,
- .layer_2_indicator = RGB_BACKLIGHT_LAYER_2_INDICATOR,
- .layer_3_indicator = RGB_BACKLIGHT_LAYER_3_INDICATOR,
- .alphas_mods = {
- RGB_BACKLIGHT_ALPHAS_MODS_ROW_0,
- RGB_BACKLIGHT_ALPHAS_MODS_ROW_1,
- RGB_BACKLIGHT_ALPHAS_MODS_ROW_2,
- RGB_BACKLIGHT_ALPHAS_MODS_ROW_3,
- RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 },
-#if defined(RGB_BACKLIGHT_M6_B)
- .custom_color = { { 0, 255 }, { 43, 255 }, { 85, 255 }, { 128, 255 }, { 171, 255 }, { 213, 255 } }
-#endif
-};
-
-bool g_suspend_state = false;
-uint8_t g_indicator_state = 0;
-
-// Global tick at 20 Hz
-uint32_t g_tick = 0;
-
-// Ticks since this key was last hit.
-uint8_t g_key_hit[BACKLIGHT_LED_COUNT];
-
-// Ticks since any key was last hit.
-uint32_t g_any_key_hit = 0;
-
-#if defined(RGB_BACKLIGHT_HS60)
-
-// This is a 7-bit address, that gets left-shifted and bit 0
-// set to 0 for write, 1 for read (as per I2C protocol)
-// ADDR_2 is not needed. it is here as a dummy
-#define ISSI_ADDR_1 0x50
-
-const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
-/* Refer to IS31 manual for these locations
- * driver
- * | R location
- * | | G location
- * | | | B location
- * | | | | */
- {0, B_1, A_1, C_1}, //LA1
- {0, E_1, D_1, F_1}, //LA2
- {0, H_1, G_1, I_1}, //LA3
- {0, K_1, J_1, L_1}, //LA4
- {0, B_2, A_2, C_2}, //LA5
- {0, E_2, D_2, F_2}, //LA6
- {0, H_2, G_2, I_2}, //LA7
- {0, K_2, J_2, L_2}, //LA8
- {0, B_3, A_3, C_3}, //LA9
- {0, E_3, D_3, F_3}, //LA10
- {0, H_3, G_3, I_3}, //LA11
- {0, K_3, J_3, L_3}, //LA12
- {0, B_4, A_4, C_4}, //LA13
- {0, E_4, D_4, F_4}, //LA14
- {0, H_4, G_4, I_4}, //LA15
- {0, K_4, J_4, L_4}, //LA16
- {0, B_5, A_5, C_5}, //LA17
- {0, E_5, D_5, F_5}, //LA18
- {0, H_5, G_5, I_5}, //LA19
- {0, K_5, J_5, L_5}, //LA20
- {0, B_6, A_6, C_6}, //LA21
- {0, E_6, D_6, F_6}, //LA22
- {0, H_6, G_6, I_6}, //LA23
- {0, K_6, J_6, L_6}, //LA24
- {0, B_7, A_7, C_7}, //LA25
- {0, E_7, D_7, F_7}, //LA26
- {0, H_7, G_7, I_7}, //LA27
- {0, K_7, J_7, L_7}, //LA28
- {0, B_8, A_8, C_8}, //LA29
- {0, E_8, D_8, F_8}, //LA30
- {0, H_8, G_8, I_8}, //LA31
- {0, K_8, J_8, L_8}, //LA32
- {0, B_9, A_9, C_9}, //LA33
- {0, E_9, D_9, F_9}, //LA34
- {0, H_9, G_9, I_9}, //LA35
- {0, K_9, J_9, L_9}, //LA36
- {0, B_10, A_10, C_10}, //LA37
- {0, E_10, D_10, F_10}, //LA38
- {0, H_10, G_10, I_10}, //LA39
- {0, K_10, J_10, L_10}, //LA40
- {0, B_11, A_11, C_11}, //LA41
- {0, E_11, D_11, F_11}, //LA42
- {0, H_11, G_11, I_11}, //LA43
- {0, K_11, J_11, L_11}, //LA44
- {0, B_12, A_12, C_12}, //LA45
- {0, E_12, D_12, F_12}, //LA46
- {0, H_12, G_12, I_12}, //LA47
- {0, K_12, J_12, L_12}, //LA48
- {0, B_13, A_13, C_13}, //LA49
- {0, E_13, D_13, F_13}, //LA50
- {0, H_13, G_13, I_13}, //LA51
- {0, K_13, J_13, L_13}, //LA52
- {0, B_14, A_14, C_14}, //LA53
- {0, E_14, D_14, F_14}, //LA54
- {0, H_14, G_14, I_14}, //LA55
- {0, K_14, J_14, L_14}, //LA56
- {0, B_15, A_15, C_15}, //LA57
- {0, E_15, D_15, F_15}, //LA58
- {0, H_15, G_15, I_15}, //LA59
- {0, K_15, J_15, L_15}, //LA60
- {0, B_16, A_16, C_16}, //LA61
- {0, E_16, D_16, F_16}, //LA62
- {0, H_16, G_16, I_16}, //LA63
- {0, K_16, J_16, L_16}, //LA64
-};
-
-#elif defined(RGB_BACKLIGHT_NK65)
-
-// This is a 7-bit address, that gets left-shifted and bit 0
-// set to 0 for write, 1 for read (as per I2C protocol)
-// ADDR_2 is not needed. it is here as a dummy
-#define ISSI_ADDR_1 0x50
-#define ISSI_ADDR_2 0x52
-
-const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
-/* Refer to IS31 manual for these locations
- * driver
- * | R location
- * | | G location
- * | | | B location
- * | | | | */
- {0, B_1, A_1, C_1}, //LA1
- {0, E_1, D_1, F_1}, //LA2
- {0, H_1, G_1, I_1}, //LA3
- {0, K_1, J_1, L_1}, //LA4
- {0, B_2, A_2, C_2}, //LA5
- {0, E_2, D_2, F_2}, //LA6
- {0, H_2, G_2, I_2}, //LA7
- {0, K_2, J_2, L_2}, //LA8
- {0, B_3, A_3, C_3}, //LA9
- {0, E_3, D_3, F_3}, //LA10
- {0, H_3, G_3, I_3}, //LA11
- {0, K_3, J_3, L_3}, //LA12
- {0, B_4, A_4, C_4}, //LA13
- {0, E_4, D_4, F_4}, //LA14
- {0, H_4, G_4, I_4}, //LA15
- {0, K_4, J_4, L_4}, //LA16
- {0, B_5, A_5, C_5}, //LA17
- {0, E_5, D_5, F_5}, //LA18
- {0, H_5, G_5, I_5}, //LA19
- {0, K_5, J_5, L_5}, //LA20
- {0, B_6, A_6, C_6}, //LA21
- {0, E_6, D_6, F_6}, //LA22
- {0, H_6, G_6, I_6}, //LA23
- {0, K_6, J_6, L_6}, //LA24
- {0, B_7, A_7, C_7}, //LA25
- {0, E_7, D_7, F_7}, //LA26
- {0, H_7, G_7, I_7}, //LA27
- {0, K_7, J_7, L_7}, //LA28
- {0, B_8, A_8, C_8}, //LA29
- {0, E_8, D_8, F_8}, //LA30
- {0, H_8, G_8, I_8}, //LA31
- {0, K_8, J_8, L_8}, //LA32
- {0, B_9, A_9, C_9}, //LA33
- {0, E_9, D_9, F_9}, //LA34
- {0, H_9, G_9, I_9}, //LA35
- {0, K_9, J_9, L_9}, //LA36
- {0, B_10, A_10, C_10}, //LA37
- {0, E_10, D_10, F_10}, //LA38
- {0, H_10, G_10, I_10}, //LA39
- {0, K_10, J_10, L_10}, //LA40
- {0, B_11, A_11, C_11}, //LA41
- {0, E_11, D_11, F_11}, //LA42
- {0, H_11, G_11, I_11}, //LA43
- {0, K_11, J_11, L_11}, //LA44
- {0, B_12, A_12, C_12}, //LA45
- {0, E_12, D_12, F_12}, //LA46
- {0, H_12, G_12, I_12}, //LA47
- {0, K_12, J_12, L_12}, //LA48
- {0, B_13, A_13, C_13}, //LA49
- {0, E_13, D_13, F_13}, //LA50
- {0, H_13, G_13, I_13}, //LA51
- {0, K_13, J_13, L_13}, //LA52
- {0, B_14, A_14, C_14}, //LA53
- {0, E_14, D_14, F_14}, //LA54
- {0, H_14, G_14, I_14}, //LA55
- {0, K_14, J_14, L_14}, //LA56
- {0, B_15, A_15, C_15}, //LA57
- {0, E_15, D_15, F_15}, //LA58
- {0, H_15, G_15, I_15}, //LA59
- {0, K_15, J_15, L_15}, //LA60
- {0, B_16, A_16, C_16}, //LA61
- {0, E_16, D_16, F_16}, //LA62
- {0, H_16, G_16, I_16}, //LA63
- {0, K_16, J_16, L_16}, //LA64
-
- {1, B_1, A_1, C_1}, //LB1
- {1, E_1, D_1, F_1}, //LB2
- {1, H_1, G_1, I_1}, //LB3
- {1, K_1, J_1, L_1}, //LB4
- {1, B_2, A_2, C_2}, //LB5
- {1, E_2, D_2, F_2}, //LB6
- {1, H_2, G_2, I_2}, //LB7
- {1, K_2, J_2, L_2}, //LB8
- {1, B_3, A_3, C_3}, //LB9
- {1, E_3, D_3, F_3}, //LB10
- {1, H_3, G_3, I_3}, //LB11
- {1, K_3, J_3, L_3}, //LB12
- {1, B_4, A_4, C_4}, //LB13
- {1, E_4, D_4, F_4}, //LB14
- {1, H_4, G_4, I_4}, //LB15
- {1, K_4, J_4, L_4}, //LB16
- {1, B_5, A_5, C_5}, //LB17
- {1, E_5, D_5, F_5}, //LB18
- {1, H_5, G_5, I_5}, //LB19
- {1, K_5, J_5, L_5}, //LB20
- {1, B_6, A_6, C_6}, //LB21
- {1, E_6, D_6, F_6}, //LB22
- {1, H_6, G_6, I_6}, //LB23
- {1, K_6, J_6, L_6}, //LB24
- {1, B_7, A_7, C_7}, //LB25
- {1, E_7, D_7, F_7}, //LB26
- {1, H_7, G_7, I_7}, //LB27
- {1, K_7, J_7, L_7}, //LB28
- {1, B_8, A_8, C_8}, //LB29
- {1, E_8, D_8, F_8}, //LB30
- {1, H_8, G_8, I_8}, //LB31
- {1, K_8, J_8, L_8}, //LB32
- {1, B_9, A_9, C_9}, //LB33
- {1, E_9, D_9, F_9}, //LB34
- {1, H_9, G_9, I_9}, //LB35
- {1, K_9, J_9, L_9}, //LB36
- {1, B_10, A_10, C_10}, //LB37
- {1, E_10, D_10, F_10}, //LB38
- {1, H_10, G_10, I_10}, //LB39
- {1, K_10, J_10, L_10}, //LB40
- {1, B_11, A_11, C_11}, //LB41
- {1, E_11, D_11, F_11}, //LB42
- {1, H_11, G_11, I_11}, //LB43
- {1, K_11, J_11, L_11}, //LB44
- {1, B_12, A_12, C_12}, //LB45
- {1, E_12, D_12, F_12}, //LB46
- {1, H_12, G_12, I_12}, //LB47
- {1, K_12, J_12, L_12}, //LB48
- {1, B_13, A_13, C_13}, //LB49
- {1, E_13, D_13, F_13}, //LB50
- {1, H_13, G_13, I_13}, //LB51
- {1, K_13, J_13, L_13}, //LB52
- {1, B_14, A_14, C_14}, //LB53
- {1, E_14, D_14, F_14}, //LB54
- {1, H_14, G_14, I_14}, //LB55
- {1, K_14, J_14, L_14}, //LB56
- {1, B_15, A_15, C_15}, //LB57
- {1, E_15, D_15, F_15}, //LB58
- {1, H_15, G_15, I_15}, //LB59
- {1, K_15, J_15, L_15}, //LB60
- {1, B_16, A_16, C_16}, //LB61
- {1, E_16, D_16, F_16}, //LB62
- {1, H_16, G_16, I_16}, //LB63
- {1, K_16, J_16, L_16}, //LB64
-};
-
-#elif !defined(RGB_BACKLIGHT_M6_B)
-// This is a 7-bit address, that gets left-shifted and bit 0
-// set to 0 for write, 1 for read (as per I2C protocol)
-#define ISSI_ADDR_1 0x74
-#define ISSI_ADDR_2 0x76
-
-const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
-/* Refer to IS31 manual for these locations
- * driver
- * | R location
- * | | G location
- * | | | B location
- * | | | | */
- {0, C2_1, C3_1, C4_1}, // LA0
- {0, C1_1, C3_2, C4_2}, // LA1
- {0, C1_2, C2_2, C4_3}, // LA2
- {0, C1_3, C2_3, C3_3}, // LA3
- {0, C1_4, C2_4, C3_4}, // LA4
- {0, C1_5, C2_5, C3_5}, // LA5
- {0, C1_6, C2_6, C3_6}, // LA6
- {0, C1_7, C2_7, C3_7}, // LA7
- {0, C1_8, C2_8, C3_8}, // LA8
- {0, C9_1, C8_1, C7_1}, // LA9
- {0, C9_2, C8_2, C7_2}, // LA10
- {0, C9_3, C8_3, C7_3}, // LA11
- {0, C9_4, C8_4, C7_4}, // LA12
- {0, C9_5, C8_5, C7_5}, // LA13
- {0, C9_6, C8_6, C7_6}, // LA14
- {0, C9_7, C8_7, C6_6}, // LA15
- {0, C9_8, C7_7, C6_7}, // LA16
- {0, C8_8, C7_8, C6_8}, // LA17
-
- {0, C2_9, C3_9, C4_9}, // LB0
- {0, C1_9, C3_10, C4_10}, // LB1
- {0, C1_10, C2_10, C4_11}, // LB2
- {0, C1_11, C2_11, C3_11}, // LB3
- {0, C1_12, C2_12, C3_12}, // LB4
- {0, C1_13, C2_13, C3_13}, // LB5
- {0, C1_14, C2_14, C3_14}, // LB6
- {0, C1_15, C2_15, C3_15}, // LB7
- {0, C1_16, C2_16, C3_16}, // LB8
- {0, C9_9, C8_9, C7_9}, // LB9
- {0, C9_10, C8_10, C7_10}, // LB10
- {0, C9_11, C8_11, C7_11}, // LB11
- {0, C9_12, C8_12, C7_12}, // LB12
- {0, C9_13, C8_13, C7_13}, // LB13
- {0, C9_14, C8_14, C7_14}, // LB14
- {0, C9_15, C8_15, C6_14}, // LB15
- {0, C9_16, C7_15, C6_15}, // LB16
- {0, C8_16, C7_16, C6_16}, // LB17
-
- {1, C2_1, C3_1, C4_1}, // LC0
- {1, C1_1, C3_2, C4_2}, // LC1
- {1, C1_2, C2_2, C4_3}, // LC2
- {1, C1_3, C2_3, C3_3}, // LC3
- {1, C1_4, C2_4, C3_4}, // LC4
- {1, C1_5, C2_5, C3_5}, // LC5
- {1, C1_6, C2_6, C3_6}, // LC6
- {1, C1_7, C2_7, C3_7}, // LC7
- {1, C1_8, C2_8, C3_8}, // LC8
- {1, C9_1, C8_1, C7_1}, // LC9
- {1, C9_2, C8_2, C7_2}, // LC10
- {1, C9_3, C8_3, C7_3}, // LC11
- {1, C9_4, C8_4, C7_4}, // LC12
- {1, C9_5, C8_5, C7_5}, // LC13
- {1, C9_6, C8_6, C7_6}, // LC14
- {1, C9_7, C8_7, C6_6}, // LC15
- {1, C9_8, C7_7, C6_7}, // LC16
- {1, C8_8, C7_8, C6_8}, // LC17
-
- {1, C2_9, C3_9, C4_9}, // LD0
- {1, C1_9, C3_10, C4_10}, // LD1
- {1, C1_10, C2_10, C4_11}, // LD2
- {1, C1_11, C2_11, C3_11}, // LD3
- {1, C1_12, C2_12, C3_12}, // LD4
- {1, C1_13, C2_13, C3_13}, // LD5
- {1, C1_14, C2_14, C3_14}, // LD6
- {1, C1_15, C2_15, C3_15}, // LD7
- {1, C1_16, C2_16, C3_16}, // LD8
- {1, C9_9, C8_9, C7_9}, // LD9
- {1, C9_10, C8_10, C7_10}, // LD10
- {1, C9_11, C8_11, C7_11}, // LD11
- {1, C9_12, C8_12, C7_12}, // LD12
- {1, C9_13, C8_13, C7_13}, // LD13
- {1, C9_14, C8_14, C7_14}, // LD14
- {1, C9_15, C8_15, C6_14}, // LD15
- {1, C9_16, C7_15, C6_15}, // LD16
- {1, C8_16, C7_16, C6_16}, // LD17
-};
-#endif // !defined(RGB_BACKLIGHT_M6_B)
-
-
-typedef struct Point {
- uint8_t x;
- uint8_t y;
-} Point;
-
-
-// index in range 0..71 (LA0..LA17, LB0..LB17, LC0..LC17, LD0..LD17)
-// point values in range x=0..224 y=0..64
-// origin is center of top-left key (i.e Esc)
-#if defined(RGB_BACKLIGHT_ZEAL65)
-const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = {
- // LA0..LA17
- {120,16}, {104,16}, {88,16}, {72,16}, {56,16}, {40,16}, {24,16}, {4,16}, {4,32},
- {128,0}, {112,0}, {96,0}, {80,0}, {64,0}, {48,0}, {32,0}, {16,0}, {0,0},
- // LB0..LB17
- {144,0}, {160,0}, {176,0}, {192,0}, {216,0}, {224,0}, {240,0}, {240,16}, {240,32},
- {136,16}, {152,16}, {168,16}, {184,16}, {200,16}, {220,16}, {240,48}, {240,64}, {224,64},
- // LC0..LC17
- {96,64}, {100,48}, {84,48}, {68,48}, {52,48}, {36,48}, {255,255}, {48,60}, {28,64},
- {108,32}, {92,32}, {76,32}, {60,32}, {44,32}, {28,32}, {20,44}, {10,48}, {4,64},
- // LD0..LD17
- {124,32}, {140,32}, {156,32}, {172,32}, {188,32}, {214,32}, {180,48}, {202,48}, {224,48},
- {116,48}, {132,48}, {148,48}, {164,48}, {255,255}, {144,60}, {164,64}, {188,64}, {208,64}
-};
-const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = {
- // LA0..LA17
- {64,128}, {75,132}, {84,145}, {91,164}, {97,187}, {102,213}, {105,242}, {109,255}, {128,243},
- {61,255}, {67,255}, {72,255}, {77,255}, {82,255}, {86,255}, {90,255}, {93,255}, {96,255},
- // LB0..LB17
- {56,255}, {51,255}, {46,255}, {42,255}, {37,255}, {35,255}, {32,255}, {19,255}, {0,255},
- {53,132}, {44,145}, {37,164}, {31,187}, {26,213}, {22,249}, {237,255}, {224,255}, {221,255},
- // LC0..LC17
- {184,255}, {179,135}, {170,149}, {163,169}, {157,193}, {153,220}, {255,255}, {167,255}, {165,255},
- {128,26}, {128,60}, {128,94}, {128,128}, {128,162}, {128,196}, {145,233}, {148,255}, {161,255},
- // LD0..LD17
- {0,9}, {0,43}, {0,77}, {0,111}, {0,145}, {0,201}, {224,181}, {230,217}, {235,255},
- {189,128}, {200,131}, {210,141}, {218,159}, {255,255}, {201,228}, {206,255}, {213,255}, {218,255}
-};
-#elif defined(RGB_BACKLIGHT_KOYU)
-const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = {
- // LA0..LA17
- {120,16}, {104,16}, {88,16}, {72,16}, {56,16}, {40,16}, {24,16}, {4,16}, {4,32},
- {128,0}, {112,0}, {96,0}, {80,0}, {64,0}, {48,0}, {32,0}, {16,0}, {0,0},
- // LB0..LB17
- {144,0}, {160,0}, {176,0}, {192,0}, {208,0}, {224,0}, {240,0}, {240,16}, {240,32},
- {136,16}, {152,16}, {168,16}, {184,16}, {200,16}, {220,16}, {240,48}, {240,64}, {224,64},
- // LC0..LC17
- {112,64}, {100,48}, {84,48}, {68,48}, {52,48}, {36,48}, {64,60}, {44,60}, {24,64},
- {108,32}, {92,32}, {76,32}, {60,32}, {44,32}, {28,32}, {255,255}, {10,48}, {4,64},
- // LD0..LD17
- {124,32}, {140,32}, {156,32}, {172,32}, {188,32}, {214,32}, {180,48}, {202,48}, {224,48},
- {116,48}, {132,48}, {148,48}, {164,48}, {255,255}, {160,60}, {180,64}, {208,64}, {255,255}
-};
-const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = {
- // LA0..LA17
- {64,128}, {75,132}, {84,145}, {91,164}, {97,187}, {102,213}, {105,242}, {109,255}, {128,243},
- {61,255}, {67,255}, {72,255}, {77,255}, {82,255}, {86,255}, {90,255}, {93,255}, {96,255},
- // LB0..LB17
- {56,255}, {51,255}, {46,255}, {42,255}, {38,255}, {35,255}, {32,255}, {19,255}, {0,255},
- {53,132}, {44,145}, {37,164}, {31,187}, {26,213}, {22,249}, {237,255}, {224,255}, {221,255},
- // LC0..LC17
- {189,255}, {179,135}, {170,149}, {163,169}, {157,193}, {153,220}, {172,252}, {169,255}, {165,255},
- {128,26}, {128,60}, {128,94}, {128,128}, {128,162}, {128,196}, {255,255}, {148,255}, {161,255},
- // LD0..LD17
- {0,9}, {0,43}, {0,77}, {0,111}, {0,145}, {0,201}, {224,181}, {230,217}, {235,255},
- {189,128}, {200,131}, {210,141}, {218,159}, {255,255}, {207,238}, {211,255}, {218,255}, {255,255}
-};
-#elif defined(RGB_BACKLIGHT_ZEAL60) || defined(RGB_BACKLIGHT_M60_A)
-const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = {
- // LA0..LA17
- {120,16}, {104,16}, {88,16}, {72,16}, {56,16}, {40,16}, {24,16}, {4,16}, {4,32},
- {128,0}, {112,0}, {96,0}, {80,0}, {64,0}, {48,0}, {32,0}, {16,0}, {0,0},
- // LB0..LB17
- {144,0}, {160,0}, {176,0}, {192,0}, {216,0}, {224,0}, {255,255}, {255,255}, {255,255},
- {136,16}, {152,16}, {168,16}, {184,16}, {200,16}, {220,16}, {255,255}, {255,255}, {255,255},
- // LC0..LC17
- {102,64}, {100,48}, {84,48}, {68,48}, {52,48}, {36,48}, {60,64}, {43,64}, {23,64},
- {108,32}, {92,32}, {76,32}, {60,32}, {44,32}, {28,32}, {20,48}, {2,48}, {3,64},
- // LD0..LD17
- {124,32}, {140,32}, {156,32}, {172,32}, {188,32}, {214,32}, {180,48}, {210,48}, {224,48},
- {116,48}, {132,48}, {148,48}, {164,48}, {144,64}, {161,64}, {181,64}, {201,64}, {221,64}
-};
-const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = {
- // LA0..LA17
- {58,129}, {70,129}, {80,139}, {89,157}, {96,181}, {101,208}, {105,238}, {109,255}, {128,247}, {58,255},
- {64,255}, {70,255}, {75,255}, {80,255}, {85,255}, {89,255}, {93,255}, {96,255},
- // LB0..LB17
- {53,255}, {48,255}, {43,255}, {39,255}, {34,255}, {32,255}, {255,255}, {255,255}, {255,255},
- {48,139}, {39,157}, {32,181}, {27,208}, {23,238}, {19,255}, {255,255}, {255,255}, {255,255},
- // LC0..LC17
- {188,255}, {183,131}, {173,143}, {165,163}, {159,188}, {154,216}, {172,252}, {170,255}, {165,255},
- {128,9}, {128,46}, {128,82}, {128,119}, {128,155}, {128,192}, {150,244}, {147,255}, {161,255},
- // LD0..LD17
- {0,27}, {0,64}, {0,101}, {0,137}, {0,174}, {255,233}, {228,201}, {235,255}, {237,255},
- {195,128}, {206,136}, {215,152}, {222,175}, {205,234}, {209,255}, {214,255}, {219,255}, {223,255}
-};
-#elif defined(RGB_BACKLIGHT_HS60) && defined(HS60_ANSI)
-const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = {
- // LA1..LA47
- {0,0}, {4,16}, {6,32}, {10,48}, {16,0}, {24,16}, {28,32}, {36,48}, {32,0}, {40,16}, {44,32}, {52,48},
- {48,0}, {56,16}, {60,32}, {68,48}, {64,0}, {72,16}, {76,32}, {84,48}, {80,0}, {88,16}, {92,32}, {100,48},
- {96,0}, {104,16}, {108,32}, {116,48}, {112,0}, {120,16}, {124,32}, {132,48}, {128,0}, {136,16}, {140,32},
- {148,48}, {144,0}, {152,16}, {156,32}, {164,48}, {160,0}, {168,16}, {172,32}, {180,48}, {176,0}, {184, 16}, {188,32},
- {255,255},// LA48 does not exist, dummy
- // LA49..LA50
- {192,0}, {200,16},
- {255,255},// LA51 does not exit, dummy
- // LA52..LA60
- {210,48}, {216,0}, {220,16}, {214,32}, {222,64}, {2,64}, {22,64}, {42,64}, {102,64},
- {255,255},// LA61 does not exit, dummy
- {162,64}, {182,64}, {202,64}
-};
-const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = {
- // LA1..LA47
- {96,255}, {109,255}, {128,242}, {148,255}, {93,255}, {105,238}, {128,192}, {154,216}, {89,255}, {101,208}, {128,155}, {159,188},
- {85,255}, {96,181}, {128,119}, {165,163}, {81,255}, {89,157}, {128,82}, {173,143}, {75,255}, {81,139}, {128,46}, {183,131},
- {70,255}, {70,129}, {129,9}, {195,128}, {64,255}, {58,129}, {255,27}, {206,136}, {58,255}, {47,139}, {255,64}, {215,152},
- {53,255}, {39,157}, {255,101}, {222,175}, {47,255}, {32,181}, {255,137}, {228,201}, {43,255}, {27,208}, {255, 174},
- {255,255},// LA48 does not exist, dummy
- // LA49..LA50
- {39,255}, {23,238},
- {255,255},// LA51 does not exit, dummy
- // LA52..LA60
- {235,255}, {33,255}, {19,255}, {255,233}, {224,255}, {160,255}, {164,255}, {169,255}, {188,255},
- {255,255},// LA61 does not exit, dummy
- {209,255}, {215,255}, {220,255}
-};
-#elif defined(RGB_BACKLIGHT_HS60) && defined(HS60_HHKB)
-const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = {
- // LA1..LA60
- {0,0}, {4,16}, {6,32}, {10,48}, {16,0}, {24,16}, {28,32}, {36,48}, {32,0}, {40,16}, {44,32}, {52,48},
- {48,0}, {56,16}, {60,32}, {68,48}, {64,0}, {72,16}, {76,32}, {84,48}, {80,0}, {88,16}, {92,32}, {100,48},
- {96,0}, {104,16}, {108,32}, {116,48}, {112,0}, {120,16}, {124,32}, {132,48}, {128,0}, {136,16}, {140,32},
- {148,48}, {144,0}, {152,16}, {156,32}, {164,48}, {160,0}, {168,16}, {172,32}, {180,48}, {176,0}, {184, 16}, {188,32},
- {224,0}, {192,0}, {200,16}, {202,48}, {224,48}, {208,0}, {220,16}, {214,32}, {220,64}, {4,64}, {24,64}, {44,64}, {112,64},
- {255,255}, {255,255}, // LA61..LA62 does not exit, dummy
- // LA63..LA64
- {180,64}, {200,64}
-};
-const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = {
- // LA1..LA60
- {96,255}, {109,255}, {128,242}, {148,255}, {93,255}, {105,238}, {128,192}, {154,216}, {89,255}, {101,208}, {128,155}, {159,188},
- {85,255}, {96,181}, {128,119}, {165,163}, {81,255}, {89,157}, {128,82}, {173,143}, {75,255}, {81,139}, {128,46}, {183,131},
- {70,255}, {70,129}, {129,9}, {195,128}, {64,255}, {58,129}, {255,27}, {206,136}, {58,255}, {47,139}, {255,64}, {215,152},
- {53,255}, {39,157}, {255,101}, {222,175}, {47,255}, {32,181}, {255,137}, {228,201}, {43,255}, {27,208}, {255, 174}, {32,255},
- {39,255}, {23,238}, {233,242}, {237,255}, {35,255}, {19,255}, {255,233}, {223,255}, {161,255}, {165,255}, {170,255}, {192,255},
- {255,255}, {255,255}, // LA61..LA62 does not exit, dummy
- // LA63..LA64
- {214,255}, {219,255}
-};
-#elif defined(RGB_BACKLIGHT_HS60) //HS60_ISO
-const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = {
- // LA1..LA50
- {0,0}, {4,16}, {6,32}, {2,48}, {16,0}, {24,16}, {28,32}, {36,48}, {32,0}, {40,16}, {44,32}, {52,48}, {48,0},
- {56,16}, {60,32}, {68,48}, {64,0}, {72,16}, {76,32}, {84,48}, {80,0}, {88,16}, {92,32}, {100,48}, {96,0}, {104,16},
- {108,32}, {116,48}, {112,0}, {120,16}, {124,32}, {132,48}, {128,0}, {136,16}, {140,32}, {148,48}, {144,0}, {152,16},
- {156,32}, {164,48}, {160,0}, {168,16}, {172,32}, {180,48}, {176,0}, {184, 16}, {188,32}, {20,48}, {192,0}, {200,16},
- {255,255},// LA51 does not exit, dummy
- // LA52..LA60
- {210,48}, {216,0}, {220,16}, {222,24}, {222,64}, {2,64}, {22,64}, {42,64}, {102,64},
- {255,255},// LA61 does not exit, dummy
- {162,64}, {182,64}, {202,64}
-};
-const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = {
- // LA1..LA50
- {96,255}, {109,255}, {128,242}, {147,255}, {93,255}, {105,238}, {128,192}, {154,216}, {89,255}, {101,208}, {128,155}, {159,188}, {85,255},
- {96,181}, {128,119}, {165,163}, {81,255}, {89,157}, {128,82}, {173,143}, {75,255}, {81,139}, {128,46}, {183,131}, {70,255}, {70,129},
- {129,9}, {195,128}, {64,255}, {58,129}, {255,27}, {206,136}, {58,255}, {47,139}, {255,64}, {215,152}, {53,255}, {39,157}, {255,101},
- {222,175}, {47,255}, {32,181}, {255,137}, {228,201}, {43,255}, {27,208}, {255, 174}, {150,246}, {39,255}, {23,238},
- {255,255},// LA51 does not exit, dummy
- // LA52..LA60
- {235,255}, {33,255}, {19,255}, {10,255}, {224,255}, {160,255}, {164,255}, {169,255}, {188,255},
- {255,255},// LA61 does not exit, dummy
- {209,255}, {215,255}, {220,255}
-};
-#elif defined(RGB_BACKLIGHT_NK65)
-const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = {
- // LA1..LA60
- {0,0}, {4,16}, {6,32}, {10,48}, {16,0}, {24,16}, {28,32}, {36,48}, {32,0}, {40,16}, {44,32}, {52,48},
- {48,0}, {56,16}, {60,32}, {68,48}, {64,0}, {72,16}, {76,32}, {84,48}, {80,0}, {88,16}, {92,32}, {100,48},
- {96,0}, {104,16}, {108,32}, {116,48}, {112,0}, {120,16}, {124,32}, {132,48}, {128,0}, {136,16}, {140,32},
- {148,48}, {144,0}, {152,16}, {156,32}, {164,48}, {160,0}, {168,16}, {172,32}, {180,48}, {176,0}, {184, 16}, {188,32},
- {160,64}, {192,0}, {200,16}, {210,48}, {224,48}, {216,0}, {220,16}, {214,32}, {224,64}, {2,64}, {22,64}, {42,64}, {102,64},
- {255,255},// LA61 does not exit, dummy
- //LA62..LB5
- {176,64}, {192,64}, {208,64}, {240,0}, {240,16}, {240,48}, {240,64}, {240,32}
-};
-const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = {
- // LA1..LA60
- {96,255}, {109,255}, {128,242}, {148,255}, {93,255}, {105,238}, {128,192}, {154,216}, {89,255}, {101,208}, {128,155}, {159,188},
- {85,255}, {96,181}, {128,119}, {165,163}, {81,255}, {89,157}, {128,82}, {173,143}, {75,255}, {81,139}, {128,46}, {183,131},
- {70,255}, {70,129}, {129,9}, {195,128}, {64,255}, {58,129}, {255,27}, {206,136}, {58,255}, {47,139}, {255,64}, {215,152},
- {53,255}, {39,157}, {255,101}, {222,175}, {47,255}, {32,181}, {255,137}, {228,201}, {43,255}, {27,208}, {255, 174},
- {208,255}, {39,255}, {23,238}, {235,255}, {235,255}, {33,255}, {19,255}, {255,233}, {224,255}, {160,255}, {164,255}, {169,255}, {188,255},
- {255,255},// LA61 does not exit, dummy
- //LA62..LB5
- {221,255}, {225,255}, {229,255}, {22,255}, {12,255}, {244,255}, {234,255}, {255,255},
-};
-#elif defined(RGB_BACKLIGHT_M6_B)
-// M6-B is really simple:
-// 0 3 5
-// 1 2 4
-const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = {
- {0,0}, {0,16}, {16,16}, {16,0}, {32,16}, {32,0}
-};
-const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = {
- {160,255}, {96,255}, {77,255}, {179,255}, {51,255}, {205,255}
-};
-#endif
-
-// This may seem counter-intuitive, but it's quite flexible.
-// For each LED, get it's position to decide what color to make it.
-// This solves the issue of LEDs (and switches) not aligning to a grid,
-// or having a large "bitmap" and sampling them.
-void map_led_to_point( uint8_t index, Point *point )
-{
- // Slightly messy way to get Point structs out of progmem.
- uint8_t *addr = (uint8_t*)&g_map_led_to_point[index];
- point->x = pgm_read_byte(addr);
- point->y = pgm_read_byte(addr+1);
-
-#if defined(RGB_BACKLIGHT_M6_B) || defined(RGB_BACKLIGHT_HS60) || defined(RGB_BACKLIGHT_NK65)
- return;
-#endif
-
- switch (index)
- {
- case 18+4: // LB4A
- if ( g_config.use_split_backspace )
- point->x -= 8;
- break;
-#if defined(RGB_BACKLIGHT_ZEAL60)
- case 18+14: // LB14A
- if ( g_config.use_iso_enter )
- point->y += 8; // extremely pedantic
- break;
- case 54+5: // LD5A
- if ( !g_config.use_iso_enter )
- point->x -= 10;
- break;
- case 36+16: // LC16A
- if ( !g_config.use_split_left_shift )
- point->x += 8;
- break;
-#endif
-#if defined(RGB_BACKLIGHT_ZEAL60) || defined(RGB_BACKLIGHT_M60_A)
- case 36+0: // LC0A
- if ( g_config.use_7u_spacebar )
- point->x += 10;
- break;
- case 36+6: // LC6A
- if ( g_config.use_7u_spacebar )
- point->x += 4;
- break;
- case 54+7: // LD7A
- if ( !g_config.use_split_right_shift )
- point->x -= 8;
- break;
-#endif
- }
-}
-
-void map_led_to_point_polar( uint8_t index, Point *point )
-{
- // Slightly messy way to get Point structs out of progmem.
- uint8_t *addr = (uint8_t*)&g_map_led_to_point_polar[index];
- point->x = pgm_read_byte(addr);
- point->y = pgm_read_byte(addr+1);
-}
-
-//
-// Maps switch matrix coordinate (row,col) to LED index
-//
-
-
-#if defined(RGB_BACKLIGHT_ZEAL65)
-// Note: Left spacebar stab is at 4,2 (LC7)
-// Right spacebar stab is at 4,9 (D14)
-//
-// A17, A16, A15, A14, A13, A12, A11, A10, A9, B0, B1, B2, B3, B4, B6
-// A7, A6, A5, A4, A3, A2, A1, A0, B9, B10, B11, B12, B13, B14, B7
-// A8, C14, C13, C12, C11, C10, C9, D0, D1, D2, D3, D4, D5, B5, B8
-// C16, C15, C5, C4, C3, C2, C1, D9, D10, D11, D12, D6, D7, D8, B15
-// C17, C8, C7, ---, ---, ---, ---, C0, ---, D14, D15, D16, D17, B17, B16
-const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
- { 0+17, 0+16, 0+15, 0+14, 0+13, 0+12, 0+11, 0+10, 0+9, 18+0, 18+1, 18+2, 18+3, 18+4, 18+6 },
- { 0+7, 0+6, 0+5, 0+4, 0+3, 0+2, 0+1, 0+0, 18+9, 18+10, 18+11, 18+12, 18+13, 18+14, 18+7 },
- { 0+8, 36+14, 36+13, 36+12, 36+11, 36+10, 36+9, 54+0, 54+1, 54+2, 54+3, 54+4, 54+5, 18+5, 18+8 },
- { 36+16, 36+15, 36+5, 36+4, 36+3, 36+2, 36+1, 54+9, 54+10, 54+11, 54+12, 54+6, 54+7, 54+8, 18+15 },
- { 36+17, 36+8, 36+7, 255, 255, 255, 255, 36+0, 255, 54+14, 54+15, 54+16, 54+17, 18+17, 18+16 }
-};
-#elif defined(RGB_BACKLIGHT_KOYU)
-// Note: Left spacebar stab is at 4,4 (LC6)
-// Right spacebar stab is at 4,10 (D14)
-//
-// A17, A16, A15, A14, A13, A12, A11, A10, A9, B0, B1, B2, B3, B4, B6
-// A7, A6, A5, A4, A3, A2, A1, A0, B9, B10, B11, B12, B13, B14, B7
-// A8, C14, C13, C12, C11, C10, C9, D0, D1, D2, D3, D4, D5, B5, B8
-// C16, C15, C5, C4, C3, C2, C1, D9, D10, D11, D12, D6, D7, D8, B15
-// C17, C8, C7, C6, ---, ---, ---, C0, ---, ---, D14, D15, D16, B17, B16
-const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
- { 0+17, 0+16, 0+15, 0+14, 0+13, 0+12, 0+11, 0+10, 0+9, 18+0, 18+1, 18+2, 18+3, 18+4, 18+6 },
- { 0+7, 0+6, 0+5, 0+4, 0+3, 0+2, 0+1, 0+0, 18+9, 18+10, 18+11, 18+12, 18+13, 18+14, 18+7 },
- { 0+8, 36+14, 36+13, 36+12, 36+11, 36+10, 36+9, 54+0, 54+1, 54+2, 54+3, 54+4, 54+5, 18+5, 18+8 },
- { 36+16, 36+15, 36+5, 36+4, 36+3, 36+2, 36+1, 54+9, 54+10, 54+11, 54+12, 54+6, 54+7, 54+8, 18+15 },
- { 36+17, 36+8, 36+7, 36+6, 255, 255, 255, 36+0, 255, 255, 54+14, 54+15, 54+16, 18+17, 18+16 }
-};
-#elif defined(RGB_BACKLIGHT_ZEAL60) || defined(RGB_BACKLIGHT_M60_A)
-// Note: Left spacebar stab is at 4,3 (LC6)
-// Right spacebar stab is at 4,9 (LD13) or 4,10 (LD14)
-//
-// A17, A16, A15, A14, A13, A12, A11, A10, A9, B0, B1, B2, B3, B4,
-// A7, A6, A5, A4, A3, A2, A1, A0, B9, B10, B11, B12, B13, B14,
-// A8, C14, C13, C12, C11, C10, C9, D0, D1, D2, D3, D4, D5, B5,
-// C16, C15, C5, C4, C3, C2, C1, D9, D10, D11, D12, D6, D7, D8,
-// C17, C8, C7, C6, ---, ---, ---, C0, ---, D13, D14, D15, D16, D17,
-const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
- { 0+17, 0+16, 0+15, 0+14, 0+13, 0+12, 0+11, 0+10, 0+9, 18+0, 18+1, 18+2, 18+3, 18+4 },
- { 0+7, 0+6, 0+5, 0+4, 0+3, 0+2, 0+1, 0+0, 18+9, 18+10, 18+11, 18+12, 18+13, 18+14 },
- { 0+8, 36+14, 36+13, 36+12, 36+11, 36+10, 36+9, 54+0, 54+1, 54+2, 54+3, 54+4, 54+5, 18+5 },
- { 36+16, 36+15, 36+5, 36+4, 36+3, 36+2, 36+1, 54+9, 54+10, 54+11, 54+12, 54+6, 54+7, 54+8 },
- { 36+17, 36+8, 36+7, 36+6, 255, 255, 255, 36+0, 255, 54+13, 54+14, 54+15, 54+16, 54+17 }
-};
-#elif defined(RGB_BACKLIGHT_HS60) && defined(HS60_ANSI)
-//
-// LA1, LA5, LA9, LA13, LA17, LA21, LA25, LA29, LA33, LA37, LA41, LA45, LA49, LA53,
-// LA2, LA6, LA10, LA14, LA18, LA22, LA26, LA30, LA34, LA38, LA42, LA46, LA50, ---,
-// LA3, LA7, LA11, LA15, LA19, LA23, LA27, LA31, LA35, LA39, LA43, LA47, LA54, LA55,
-// LA4, ---, LA8, LA12, LA16, LA20, LA24, LA28, LA32, LA36, LA40, LA44, ---, LA52,
-// LA57, LA58, LA59, ---, ---, ---, LA60, ---, ---, ---, LA62, LA63, LA64, LA56
-const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
- { 1-1, 5-1, 9-1, 13-1, 17-1, 21-1, 25-1, 29-1, 33-1, 37-1, 41-1, 45-1, 49-1, 53-1 },
- { 2-1, 6-1, 10-1, 14-1, 18-1, 22-1, 26-1, 30-1, 34-1, 38-1, 42-1, 46-1, 50-1, 255 },
- { 3-1, 7-1, 11-1, 15-1, 19-1, 23-1, 27-1, 31-1, 35-1, 39-1, 43-1, 47-1, 54-1, 55-1 },
- { 4-1, 255, 8-1, 12-1, 16-1, 20-1, 24-1, 28-1, 32-1, 36-1, 40-1, 44-1, 255, 52-1 },
- { 57-1, 58-1, 59-1, 255, 255, 255, 60-1, 255, 255, 255, 62-1, 63-1, 64-1, 56-1 }
-};
-#elif defined(RGB_BACKLIGHT_HS60) && defined(HS60_HHKB)
-//
-// LA1, LA5, LA9, LA13, LA17, LA21, LA25, LA29, LA33, LA37, LA41, LA45, LA49, LA53,
-// LA2, LA6, LA10, LA14, LA18, LA22, LA26, LA30, LA34, LA38, LA42, LA46, LA50, LA48,
-// LA3, LA7, LA11, LA15, LA19, LA23, LA27, LA31, LA35, LA39, LA43, LA47, LA54, LA55,
-// LA4, ---, LA8, LA12, LA16, LA20, LA24, LA28, LA32, LA36, LA40, LA44, LA51, LA52,
-// LA57, LA58, LA59, ---, ---, ---, LA60, ---, ---, ---, ---, LA63, LA64, LA56
-const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
- { 1-1, 5-1, 9-1, 13-1, 17-1, 21-1, 25-1, 29-1, 33-1, 37-1, 41-1, 45-1, 49-1, 53-1 },
- { 2-1, 6-1, 10-1, 14-1, 18-1, 22-1, 26-1, 30-1, 34-1, 38-1, 42-1, 46-1, 50-1, 48-1 },
- { 3-1, 7-1, 11-1, 15-1, 19-1, 23-1, 27-1, 31-1, 35-1, 39-1, 43-1, 47-1, 54-1, 55-1 },
- { 4-1, 255, 8-1, 12-1, 16-1, 20-1, 24-1, 28-1, 32-1, 36-1, 40-1, 44-1, 51-1, 52-1 },
- { 57-1, 58-1, 59-1, 255, 255, 255, 60-1, 255, 255, 255, 255, 63-1, 64-1, 56-1 }
-};
-#elif defined(RGB_BACKLIGHT_HS60) //HS60_ISO
-//
-// LA1, LA5, LA9, LA13, LA17, LA21, LA25, LA29, LA33, LA37, LA41, LA45, LA49, LA53,
-// LA2, LA6, LA10, LA14, LA18, LA22, LA26, LA30, LA34, LA38, LA42, LA46, LA50, ---,
-// LA3, LA7, LA11, LA15, LA19, LA23, LA27, LA31, LA35, LA39, LA43, LA47, LA54, LA55,
-// LA4, LA48, LA8, LA12, LA16, LA20, LA24, LA28, LA32, LA36, LA40, LA44, ---, LA52,
-// LA57, LA58, LA59, ---, ---, ---, LA60, ---, ---, ---, LA62, LA63, LA64, LA56
-const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
- { 1-1, 5-1, 9-1, 13-1, 17-1, 21-1, 25-1, 29-1, 33-1, 37-1, 41-1, 45-1, 49-1, 53-1 },
- { 2-1, 6-1, 10-1, 14-1, 18-1, 22-1, 26-1, 30-1, 34-1, 38-1, 42-1, 46-1, 50-1, 255 },
- { 3-1, 7-1, 11-1, 15-1, 19-1, 23-1, 27-1, 31-1, 35-1, 39-1, 43-1, 47-1, 54-1, 55-1 },
- { 4-1, 48-1, 8-1, 12-1, 16-1, 20-1, 24-1, 28-1, 32-1, 36-1, 40-1, 44-1, 255, 52-1 },
- { 57-1, 58-1, 59-1, 255, 255, 255, 60-1, 255, 255, 255, 62-1, 63-1, 64-1, 56-1 }
-};
-#elif defined(RGB_BACKLIGHT_NK65)
-//
-// LA1, LA5, LA9, LA13, LA17, LA21, LA25, LA29, LA33, LA37, LA41, LA45, LA49, LA53, LB1,
-// LA2, LA6, LA10, LA14, LA18, LA22, LA26, LA30, LA34, LA38, LA42, LA46, LA50, ---, LB2,
-// LA3, LA7, LA11, LA15, LA19, LA23, LA27, LA31, LA35, LA39, LA43, LA47, LA54, LA55, LB5,
-// LA4, ---, LA8, LA12, LA16, LA20, LA24, LA28, LA32, LA36, LA40, LA44, LA51, LA52, LB3,
-// LA57, LA58, LA59, ---, ---, ---, LA60, ---, ---, LA48, LA62, LA63, LA64, LA56, LB4
-const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
- { 1-1, 5-1, 9-1, 13-1, 17-1, 21-1, 25-1, 29-1, 33-1, 37-1, 41-1, 45-1, 49-1, 53-1, 1+64-1 },
- { 2-1, 6-1, 10-1, 14-1, 18-1, 22-1, 26-1, 30-1, 34-1, 38-1, 42-1, 46-1, 50-1, 255, 2+64-1 },
- { 3-1, 7-1, 11-1, 15-1, 19-1, 23-1, 27-1, 31-1, 35-1, 39-1, 43-1, 47-1, 54-1, 55-1, 5+64-1 },
- { 4-1, 255, 8-1, 12-1, 16-1, 20-1, 24-1, 28-1, 32-1, 36-1, 40-1, 44-1, 51-1, 52-1, 3+64-1 },
- { 57-1, 58-1, 59-1, 255, 255, 255, 60-1, 255, 255, 48-1, 62-1, 63-1, 64-1, 56-1, 4+64-1 }
-};
-#elif defined(RGB_BACKLIGHT_M6_B)
-// M6-B is really simple:
-// 0 3 5
-// 1 2 4
-const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
- { 0, 3, 5, 1, 2, 4 }
-};
-#endif
-
-void map_row_column_to_led( uint8_t row, uint8_t column, uint8_t *led )
-{
- *led = 255;
- if ( row < MATRIX_ROWS && column < MATRIX_COLS )
- {
- *led = pgm_read_byte(&g_map_row_column_to_led[row][column]);
- }
-}
-
-void backlight_update_pwm_buffers(void)
-{
-#if defined(RGB_BACKLIGHT_M6_B)
- IS31FL3218_update_pwm_buffers();
-#elif defined(RGB_BACKLIGHT_HS60)
- IS31FL3733_update_pwm_buffers( ISSI_ADDR_1, 0 );
- IS31FL3733_update_led_control_registers( ISSI_ADDR_1, 0 );
-#elif defined(RGB_BACKLIGHT_NK65)
- IS31FL3733_update_pwm_buffers( ISSI_ADDR_1, 0 );
- IS31FL3733_update_pwm_buffers( ISSI_ADDR_2, 1 );
- IS31FL3733_update_led_control_registers( ISSI_ADDR_1, 0 );
- IS31FL3733_update_led_control_registers( ISSI_ADDR_2, 1 );
-#else
- IS31FL3731_update_pwm_buffers( ISSI_ADDR_1, ISSI_ADDR_2 );
- IS31FL3731_update_led_control_registers( ISSI_ADDR_1, ISSI_ADDR_2 );
-#endif
-}
-
-void backlight_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
-{
-#if defined(RGB_BACKLIGHT_M6_B)
- IS31FL3218_set_color( index, red, green, blue );
-#elif defined(RGB_BACKLIGHT_HS60) || defined(RGB_BACKLIGHT_NK65)
- IS31FL3733_set_color( index, red, green, blue );
-#else
- IS31FL3731_set_color( index, red, green, blue );
-#endif
-}
-
-void backlight_set_color_all( uint8_t red, uint8_t green, uint8_t blue )
-{
-#if defined(RGB_BACKLIGHT_M6_B)
- IS31FL3218_set_color_all( red, green, blue );
-#elif defined(RGB_BACKLIGHT_HS60) || defined(RGB_BACKLIGHT_NK65)
- IS31FL3733_set_color_all( red, green, blue );
-#else
- IS31FL3731_set_color_all( red, green, blue );
-#endif
-}
-
-void backlight_set_key_hit(uint8_t row, uint8_t column)
-{
- uint8_t led;
- map_row_column_to_led(row,column,&led);
- g_key_hit[led] = 0;
-
- g_any_key_hit = 0;
-}
-
-#if !defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65)
-// This is (F_CPU/1024) / 20 Hz
-// = 15625 Hz / 20 Hz
-// = 781
-#define TIMER3_TOP 781
-
-void backlight_timer_init(void)
-{
- static uint8_t backlight_timer_is_init = 0;
- if ( backlight_timer_is_init )
- {
- return;
- }
- backlight_timer_is_init = 1;
-
- // Timer 3 setup
- TCCR3B = _BV(WGM32) | // CTC mode OCR3A as TOP
- _BV(CS32) | _BV(CS30); // prescale by /1024
- // Set TOP value
- uint8_t sreg = SREG;
- cli();
-
- OCR3AH = (TIMER3_TOP >> 8) & 0xff;
- OCR3AL = TIMER3_TOP & 0xff;
- SREG = sreg;
-}
-
-void backlight_timer_enable(void)
-{
- TIMSK3 |= _BV(OCIE3A);
-}
-
-void backlight_timer_disable(void)
-{
- TIMSK3 &= ~_BV(OCIE3A);
-}
-#else //STM32, use GPT with TIM4. Enable in halconf.h
-static void gpt_backlight_timer_task(GPTDriver *gptp);
-// Timer setup at 200Khz, callback at 10k ticks = 20Hz
-static GPTConfig gpt4cfg1 = {
- .frequency = 200000U,
- .callback = gpt_backlight_timer_task
-};
-
-void backlight_timer_init(void)
-{
- gptStart(&GPTD4, &gpt4cfg1);
-}
-
-void backlight_timer_enable(void)
-{
- gptStartContinuous(&GPTD4, 10000);
-}
-
-void backlight_timer_disable(void)
-{
- gptStopTimer(&GPTD4);
-}
-#endif //!defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65)
-
-void backlight_set_suspend_state(bool state)
-{
- g_suspend_state = state;
-}
-
-void backlight_set_indicator_state(uint8_t state)
-{
- g_indicator_state = state;
-}
-
-void backlight_effect_rgb_test(void)
-{
- // Mask out bits 4 and 5
- // This 2-bit value will stay the same for 16 ticks.
- switch ( (g_tick & 0x30) >> 4 )
- {
- case 0:
- {
- backlight_set_color_all( 255, 0, 0 );
- break;
- }
- case 1:
- {
- backlight_set_color_all( 0, 255, 0 );
- break;
- }
- case 2:
- {
- backlight_set_color_all( 0, 0, 255 );
- break;
- }
- case 3:
- {
- backlight_set_color_all( 255, 255, 255 );
- break;
- }
- }
-}
-
-#if defined(RGB_DEBUGGING_ONLY)
-// This tests the LEDs
-// Note that it will change the LED control registers
-// in the LED drivers, and leave them in an invalid
-// state for other backlight effects.
-// ONLY USE THIS FOR TESTING LEDS!
-void backlight_effect_single_LED_test(void)
-{
- static uint8_t color = 0; // 0,1,2 for R,G,B
- static uint8_t row = 0;
- static uint8_t column = 0;
-
- static uint8_t tick = 0;
- tick++;
-
- if ( tick > 2 )
- {
- tick = 0;
- column++;
- }
- if ( column > 14 )
- {
- column = 0;
- row++;
- }
- if ( row > 4 )
- {
- row = 0;
- color++;
- }
- if ( color > 2 )
- {
- color = 0;
- }
-
- uint8_t led;
- map_row_column_to_led( row, column, &led );
- backlight_set_color_all( 255, 255, 255 );
- backlight_test_led( led, color==0, color==1, color==2 );
-}
-#endif // defined(RGB_DEBUGGING_ONLY)
-
-// All LEDs off
-void backlight_effect_all_off(void)
-{
- backlight_set_color_all( 0, 0, 0 );
-}
-
-// Solid color
-void backlight_effect_solid_color(void)
-{
- HSV hsv = { .h = g_config.color_1.h, .s = g_config.color_1.s, .v = g_config.brightness };
- RGB rgb = hsv_to_rgb( hsv );
- backlight_set_color_all( rgb.r, rgb.g, rgb.b );
-}
-
-// alphas = color1, mods = color2
-void backlight_effect_alphas_mods(void)
-{
- RGB rgb1 = hsv_to_rgb( (HSV){ .h = g_config.color_1.h, .s = g_config.color_1.s, .v = g_config.brightness } );
- RGB rgb2 = hsv_to_rgb( (HSV){ .h = g_config.color_2.h, .s = g_config.color_2.s, .v = g_config.brightness } );
-
- for ( int row = 0; row < MATRIX_ROWS; row++ )
- {
- for ( int column = 0; column < MATRIX_COLS; column++ )
- {
- uint8_t index;
- map_row_column_to_led( row, column, &index );
- if ( index < BACKLIGHT_LED_COUNT )
- {
- if ( ( g_config.alphas_mods[row] & (1<<column) ) == 0 )
- {
- backlight_set_color( index, rgb1.r, rgb1.g, rgb1.b );
- }
- else
- {
- backlight_set_color( index, rgb2.r, rgb2.g, rgb2.b );
- }
- }
- }
- }
-}
-
-void backlight_effect_gradient_up_down(void)
-{
- int16_t h1 = g_config.color_1.h;
- int16_t h2 = g_config.color_2.h;
- int16_t deltaH = h2 - h1;
-
- // Take the shortest path between hues
- if ( deltaH > 127 )
- {
- deltaH -= 256;
- }
- else if ( deltaH < -127 )
- {
- deltaH += 256;
- }
- // Divide delta by 4, this gives the delta per row
- deltaH /= 4;
-
- int16_t s1 = g_config.color_1.s;
- int16_t s2 = g_config.color_2.s;
- int16_t deltaS = ( s2 - s1 ) / 4;
-
- HSV hsv = { .h = 0, .s = 255, .v = g_config.brightness };
- RGB rgb;
- Point point;
- for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
- {
- map_led_to_point( i, &point );
- // The y range will be 0..64, map this to 0..4
- uint8_t y = (point.y>>4);
- // Relies on hue being 8-bit and wrapping
- hsv.h = g_config.color_1.h + ( deltaH * y );
- hsv.s = g_config.color_1.s + ( deltaS * y );
- rgb = hsv_to_rgb( hsv );
- backlight_set_color( i, rgb.r, rgb.g, rgb.b );
- }
-}
-
-void backlight_effect_raindrops(bool initialize)
-{
- int16_t h1 = g_config.color_1.h;
- int16_t h2 = g_config.color_2.h;
- int16_t deltaH = h2 - h1;
- deltaH /= 4;
-
- // Take the shortest path between hues
- if ( deltaH > 127 )
- {
- deltaH -= 256;
- }
- else if ( deltaH < -127 )
- {
- deltaH += 256;
- }
-
- int16_t s1 = g_config.color_1.s;
- int16_t s2 = g_config.color_2.s;
- int16_t deltaS = ( s2 - s1 ) / 4;
-
- HSV hsv;
- RGB rgb;
-
- // Change one LED every tick
- uint8_t led_to_change = ( g_tick & 0x000 ) == 0 ? rand() % BACKLIGHT_LED_COUNT : 255;
-
- for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
- {
- // If initialize, all get set to random colors
- // If not, all but one will stay the same as before.
- if ( initialize || i == led_to_change )
- {
- hsv.h = h1 + ( deltaH * ( rand() & 0x03 ) );
- hsv.s = s1 + ( deltaS * ( rand() & 0x03 ) );
- // Override brightness with global brightness control
- hsv.v = g_config.brightness;;
-
- rgb = hsv_to_rgb( hsv );
- backlight_set_color( i, rgb.r, rgb.g, rgb.b );
- }
- }
-}
-
-void backlight_effect_cycle_all(void)
-{
- uint8_t offset = ( g_tick << g_config.effect_speed ) & 0xFF;
-
- // Relies on hue being 8-bit and wrapping
- for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
- {
- uint16_t offset2 = g_key_hit[i]<<2;
-#if !defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65)
- // stabilizer LEDs use spacebar hits
- if ( i == 36+6 || i == 54+13 || // LC6, LD13
- ( g_config.use_7u_spacebar && i == 54+14 ) ) // LD14
- {
- offset2 = g_key_hit[36+0]<<2;
- }
-#endif
- offset2 = (offset2<=63) ? (63-offset2) : 0;
-
- HSV hsv = { .h = offset+offset2, .s = 255, .v = g_config.brightness };
- RGB rgb = hsv_to_rgb( hsv );
- backlight_set_color( i, rgb.r, rgb.g, rgb.b );
- }
-}
-
-void backlight_effect_cycle_left_right(void)
-{
- uint8_t offset = ( g_tick << g_config.effect_speed ) & 0xFF;
- HSV hsv = { .h = 0, .s = 255, .v = g_config.brightness };
- RGB rgb;
- Point point;
- for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
- {
- uint16_t offset2 = g_key_hit[i]<<2;
-#if !defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65)
- // stabilizer LEDs use spacebar hits
- if ( i == 36+6 || i == 54+13 || // LC6, LD13
- ( g_config.use_7u_spacebar && i == 54+14 ) ) // LD14
- {
- offset2 = g_key_hit[36+0]<<2;
- }
-#endif
- offset2 = (offset2<=63) ? (63-offset2) : 0;
-
- map_led_to_point( i, &point );
- // Relies on hue being 8-bit and wrapping
- hsv.h = point.x + offset + offset2;
- rgb = hsv_to_rgb( hsv );
- backlight_set_color( i, rgb.r, rgb.g, rgb.b );
- }
-}
-
-void backlight_effect_cycle_up_down(void)
-{
- uint8_t offset = ( g_tick << g_config.effect_speed ) & 0xFF;
- HSV hsv = { .h = 0, .s = 255, .v = g_config.brightness };
- RGB rgb;
- Point point;
- for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
- {
- uint16_t offset2 = g_key_hit[i]<<2;
-#if !defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65)
- // stabilizer LEDs use spacebar hits
- if ( i == 36+6 || i == 54+13 || // LC6, LD13
- ( g_config.use_7u_spacebar && i == 54+14 ) ) // LD14
- {
- offset2 = g_key_hit[36+0]<<2;
- }
-#endif
- offset2 = (offset2<=63) ? (63-offset2) : 0;
-
- map_led_to_point( i, &point );
- // Relies on hue being 8-bit and wrapping
- hsv.h = point.y + offset + offset2;
- rgb = hsv_to_rgb( hsv );
- backlight_set_color( i, rgb.r, rgb.g, rgb.b );
- }
-}
-
-void backlight_effect_jellybean_raindrops( bool initialize )
-{
- HSV hsv;
- RGB rgb;
-
- // Change one LED every tick
- uint8_t led_to_change = ( g_tick & 0x000 ) == 0 ? rand() % BACKLIGHT_LED_COUNT : 255;
-
- for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
- {
- // If initialize, all get set to random colors
- // If not, all but one will stay the same as before.
- if ( initialize || i == led_to_change )
- {
- hsv.h = rand() & 0xFF;
- hsv.s = rand() & 0xFF;
- // Override brightness with global brightness control
- hsv.v = g_config.brightness;;
-
- rgb = hsv_to_rgb( hsv );
- backlight_set_color( i, rgb.r, rgb.g, rgb.b );
- }
- }
-}
-
-void backlight_effect_cycle_radial1(void)
-{
- uint8_t offset = ( g_tick << g_config.effect_speed ) & 0xFF;
- HSV hsv = { .h = 0, .s = 255, .v = g_config.brightness };
- RGB rgb;
- Point point;
- for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
- {
- map_led_to_point_polar( i, &point );
- // Relies on hue being 8-bit and wrapping
- hsv.h = point.x + offset;
- hsv.s = point.y;
- rgb = hsv_to_rgb( hsv );
- backlight_set_color( i, rgb.r, rgb.g, rgb.b );
- }
-}
-
-void backlight_effect_cycle_radial2(void)
-{
- uint8_t offset = ( g_tick << g_config.effect_speed ) & 0xFF;
-
- HSV hsv = { .h = 0, .s = g_config.color_1.s, .v = g_config.brightness };
- RGB rgb;
- Point point;
- for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
- {
- map_led_to_point_polar( i, &point );
- uint8_t offset2 = offset + point.x;
- if ( offset2 & 0x80 )
- {
- offset2 = ~offset2;
- }
- offset2 = offset2 >> 2;
- hsv.h = g_config.color_1.h + offset2;
- hsv.s = 127 + ( point.y >> 1 );
- rgb = hsv_to_rgb( hsv );
- backlight_set_color( i, rgb.r, rgb.g, rgb.b );
- }
-}
-
-#if defined(RGB_BACKLIGHT_M6_B)
-void backlight_effect_custom_colors(void)
-{
- RGB rgb;
- for ( uint8_t i = 0; i < 6; i++ )
- {
- HSV hsv = { .h = g_config.custom_color[i].h, .s = g_config.custom_color[i].s, .v = g_config.brightness };
- rgb = hsv_to_rgb( hsv );
- uint8_t led;
- map_row_column_to_led( 0, i, &led );
- backlight_set_color( led, rgb.r, rgb.g, rgb.b );
- }
-}
-#endif
-
-void backlight_effect_indicators_set_colors( uint8_t index, HS color )
-{
- HSV hsv = { .h = color.h, .s = color.s, .v = g_config.brightness };
- RGB rgb = hsv_to_rgb( hsv );
- if ( index == 254 )
- {
- backlight_set_color_all( rgb.r, rgb.g, rgb.b );
- }
- else
- {
- backlight_set_color( index, rgb.r, rgb.g, rgb.b );
-
- // If the spacebar LED is the indicator,
- // do the same for the spacebar stabilizers
- if ( index == 36+0 ) // LC0
- {
-#if defined(RGB_BACKLIGHT_ZEAL65)
- backlight_set_color( 36+7, rgb.r, rgb.g, rgb.b ); // LC7
- backlight_set_color( 54+14, rgb.r, rgb.g, rgb.b ); // LD14
-#elif defined(RGB_BACKLIGHT_KOYU)
- backlight_set_color( 36+6, rgb.r, rgb.g, rgb.b ); // LC6
- backlight_set_color( 54+14, rgb.r, rgb.g, rgb.b ); // LD14
-#elif defined(RGB_BACKLIGHT_ZEAL60) || defined(RGB_BACKLIGHT_M60_A)
- backlight_set_color( 36+6, rgb.r, rgb.g, rgb.b ); // LC6
- backlight_set_color( 54+13, rgb.r, rgb.g, rgb.b ); // LD13
- if ( g_config.use_7u_spacebar )
- {
- backlight_set_color( 54+14, rgb.r, rgb.g, rgb.b ); // LD14
- }
-#endif
- }
- }
-}
-
-// This runs after another backlight effect and replaces
-// colors already set
-void backlight_effect_indicators(void)
-{
- if ( g_config.caps_lock_indicator.index != 255 &&
- ( g_indicator_state & (1<<USB_LED_CAPS_LOCK) ) )
- {
- backlight_effect_indicators_set_colors( g_config.caps_lock_indicator.index, g_config.caps_lock_indicator.color );
- }
-
-#if defined(RGB_BACKLIGHT_NK65)
- if ( g_indicator_state & (1<<USB_LED_CAPS_LOCK) )
- {
- IS31FL3733_set_color( 7+64-1, 0, 255, 0 );
- } else {
- IS31FL3733_set_color( 7+64-1, 0, 0, 0 );
- }
- if ( g_indicator_state & (1<<USB_LED_SCROLL_LOCK) )
- {
- IS31FL3733_set_color( 6+64-1, 255, 0, 255 );
- } else {
- IS31FL3733_set_color( 6+64-1, 0, 0, 0 );
- }
- if ( g_indicator_state & (1<<USB_LED_NUM_LOCK) )
- {
- IS31FL3733_set_color( 6+64-1, 0, 255, 0 );
- } else {
- IS31FL3733_set_color( 6+64-1, 0, 0, 0 );
- }
-#endif
-
- // This if/else if structure allows higher layers to
- // override lower ones. If we set layer 3's indicator
- // to none, then it will NOT show layer 2 or layer 1
- // indicators, even if those layers are on via the
- // MO13/MO23 Fn combo magic.
- //
- // Basically we want to handle the case where layer 3 is
- // still the backlight configuration layer and we don't
- // want "all LEDs" indicators hiding the backlight effect,
- // but still allow end users to do whatever they want.
- if ( IS_LAYER_ON(3) )
- {
- if ( g_config.layer_3_indicator.index != 255 )
- {
- backlight_effect_indicators_set_colors( g_config.layer_3_indicator.index, g_config.layer_3_indicator.color );
- }
- }
- else if ( IS_LAYER_ON(2) )
- {
- if ( g_config.layer_2_indicator.index != 255 )
- {
- backlight_effect_indicators_set_colors( g_config.layer_2_indicator.index, g_config.layer_2_indicator.color );
- }
- }
- else if ( IS_LAYER_ON(1) )
- {
- if ( g_config.layer_1_indicator.index != 255 )
- {
- backlight_effect_indicators_set_colors( g_config.layer_1_indicator.index, g_config.layer_1_indicator.color );
- }
- }
-}
-
-#if !defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65)
-ISR(TIMER3_COMPA_vect)
-#else //STM32 interrupt
-static void gpt_backlight_timer_task(GPTDriver *gptp)
-#endif
-{
- // delay 1 second before driving LEDs or doing anything else
- static uint8_t startup_tick = 0;
- if ( startup_tick < 20 )
- {
- startup_tick++;
- return;
- }
-
- g_tick++;
-
- if ( g_any_key_hit < 0xFFFFFFFF )
- {
- g_any_key_hit++;
- }
-
- for ( int led = 0; led < BACKLIGHT_LED_COUNT; led++ )
- {
- if ( g_key_hit[led] < 255 )
- {
- g_key_hit[led]++;
- }
- }
-
- // Factory default magic value
- if ( g_config.effect == 255 )
- {
- backlight_effect_rgb_test();
- return;
- }
-
- // Ideally we would also stop sending zeros to the LED driver PWM buffers
- // while suspended and just do a software shutdown. This is a cheap hack for now.
- bool suspend_backlight = ((g_suspend_state && g_config.disable_when_usb_suspended) ||
- (g_config.disable_after_timeout > 0 && g_any_key_hit > g_config.disable_after_timeout * 60 * 20));
- uint8_t effect = suspend_backlight ? 0 : g_config.effect;
-
- // Keep track of the effect used last time,
- // detect change in effect, so each effect can
- // have an optional initialization.
- static uint8_t effect_last = 255;
- bool initialize = effect != effect_last;
- effect_last = effect;
-
- // this gets ticked at 20 Hz.
- // each effect can opt to do calculations
- // and/or request PWM buffer updates.
- switch ( effect )
- {
- case 0:
- backlight_effect_all_off();
- break;
- case 1:
- backlight_effect_solid_color();
- break;
- case 2:
-#if defined(RGB_BACKLIGHT_M6_B)
- backlight_effect_custom_colors();
-#else
- backlight_effect_alphas_mods();
-#endif
- break;
- case 3:
- backlight_effect_gradient_up_down();
- break;
- case 4:
- backlight_effect_raindrops( initialize );
- break;
- case 5:
- backlight_effect_cycle_all();
- break;
- case 6:
- backlight_effect_cycle_left_right();
- break;
- case 7:
- backlight_effect_cycle_up_down();
- break;
- case 8:
- backlight_effect_jellybean_raindrops( initialize );
- break;
- case 9:
- backlight_effect_cycle_radial1();
- break;
- case 10:
- backlight_effect_cycle_radial2();
- break;
- default:
- backlight_effect_all_off();
- break;
- }
-
- if ( ! suspend_backlight )
- {
-#if !defined(RGB_BACKLIGHT_M6_B)
- backlight_effect_indicators();
-#endif
- }
-}
-
-void backlight_set_indicator_index( uint8_t *index, uint8_t row, uint8_t column )
-{
- if ( row >= MATRIX_ROWS )
- {
- // Special value, 255=none, 254=all
- *index = row;
- }
- else
- {
- map_row_column_to_led( row, column, index );
- }
-}
-
-void backlight_get_indicator_row_col( uint8_t index, uint8_t *row, uint8_t *column )
-{
- if ( index == 255 || index == 254 )
- {
- // Special value, 255=none, 254=all
- *row = index;
- *column = 0;
- return;
- }
- for ( uint8_t r = 0; r < MATRIX_ROWS; r++ )
- {
- for ( uint8_t c = 0; c < MATRIX_COLS; c++ )
- {
- uint8_t i = 255;
- map_row_column_to_led( r, c, &i );
- if ( i == index )
- {
- *row = r;
- *column = c;
- return;
- }
- }
- }
-}
-
-// Some helpers for setting/getting HSV
-void _set_color( HS *color, uint8_t *data )
-{
- color->h = data[0];
- color->s = data[1];
-}
-
-void _get_color( HS *color, uint8_t *data )
-{
- data[0] = color->h;
- data[1] = color->s;
-}
-
-void backlight_config_set_value( uint8_t *data )
-{
- bool reinitialize = false;
- uint8_t *value_id = &(data[0]);
- uint8_t *value_data = &(data[1]);
- switch ( *value_id )
- {
-#if defined (RGB_BACKLIGHT_ZEAL60) || defined(RGB_BACKLIGHT_ZEAL65)
- case id_use_split_backspace:
- {
- g_config.use_split_backspace = (bool)*value_data;
- reinitialize = true;
- break;
- }
-#endif
-#if defined (RGB_BACKLIGHT_ZEAL60)
- case id_use_split_left_shift:
- {
- g_config.use_split_left_shift = (bool)*value_data;
- reinitialize = true;
- break;
- }
- case id_use_split_right_shift:
- {
- g_config.use_split_right_shift = (bool)*value_data;
- reinitialize = true;
- break;
- }
- case id_use_7u_spacebar:
- {
- g_config.use_7u_spacebar = (bool)*value_data;
- reinitialize = true;
- break;
- }
- case id_use_iso_enter:
- {
- g_config.use_iso_enter = (bool)*value_data;
- reinitialize = true;
- break;
- }
- case id_disable_hhkb_blocker_leds:
- {
- g_config.disable_hhkb_blocker_leds = (bool)*value_data;
- reinitialize = true;
- break;
- }
-#endif
- case id_disable_when_usb_suspended:
- {
- g_config.disable_when_usb_suspended = (bool)*value_data;
- break;
- }
- case id_disable_after_timeout:
- {
- g_config.disable_after_timeout = *value_data;
- break;
- }
- case id_brightness:
- {
- g_config.brightness = *value_data;
- break;
- }
- case id_effect:
- {
- g_config.effect = *value_data;
- break;
- }
- case id_effect_speed:
- {
- g_config.effect_speed = *value_data;
- break;
- }
- case id_color_1:
- {
- _set_color( &(g_config.color_1), value_data );
- break;
- }
- case id_color_2:
- {
- _set_color( &(g_config.color_2), value_data );
- break;
- }
- case id_caps_lock_indicator_color:
- {
- _set_color( &(g_config.caps_lock_indicator.color), value_data );
- break;
- }
- case id_caps_lock_indicator_row_col:
- {
- backlight_set_indicator_index( &(g_config.caps_lock_indicator.index), value_data[0], value_data[1] );
- break;
- }
- case id_layer_1_indicator_color:
- {
- _set_color( &(g_config.layer_1_indicator.color), value_data );
- break;
- }
- case id_layer_1_indicator_row_col:
- {
- backlight_set_indicator_index( &(g_config.layer_1_indicator.index), value_data[0], value_data[1] );
- break;
- }
- case id_layer_2_indicator_color:
- {
- _set_color( &(g_config.layer_2_indicator.color), value_data );
- break;
- }
- case id_layer_2_indicator_row_col:
- {
- backlight_set_indicator_index( &(g_config.layer_2_indicator.index), value_data[0], value_data[1] );
- break;
- }
- case id_layer_3_indicator_color:
- {
- _set_color( &(g_config.layer_3_indicator.color), value_data );
- break;
- }
- case id_layer_3_indicator_row_col:
- {
- backlight_set_indicator_index( &(g_config.layer_3_indicator.index), value_data[0], value_data[1] );
- break;
- }
- case id_alphas_mods:
- {
- for ( int i=0; i<5; i++ )
- {
- g_config.alphas_mods[i] = ( *(value_data+i*2) << 8 ) | ( *(value_data+i*2+1) );
- }
- }
-#if defined(RGB_BACKLIGHT_M6_B)
- case id_custom_color:
- {
- uint8_t index = value_data[0];
- if ( index >= 0 && index <= 6 )
- {
- _set_color( &(g_config.custom_color[index]), &(value_data[1]) );
- }
- }
-#endif
- }
-
- if ( reinitialize )
- {
- backlight_init_drivers();
- }
-}
-
-void backlight_config_get_value( uint8_t *data )
-{
- uint8_t *value_id = &(data[0]);
- uint8_t *value_data = &(data[1]);
- switch ( *value_id )
- {
- case id_use_split_backspace:
- {
- *value_data = ( g_config.use_split_backspace ? 1 : 0 );
- break;
- }
- case id_use_split_left_shift:
- {
- *value_data = ( g_config.use_split_left_shift ? 1 : 0 );
- break;
- }
- case id_use_split_right_shift:
- {
- *value_data = ( g_config.use_split_right_shift ? 1 : 0 );
- break;
- }
- case id_use_7u_spacebar:
- {
- *value_data = ( g_config.use_7u_spacebar ? 1 : 0 );
- break;
- }
- case id_use_iso_enter:
- {
- *value_data = ( g_config.use_iso_enter ? 1 : 0 );
- break;
- }
- case id_disable_when_usb_suspended:
- {
- *value_data = ( g_config.disable_when_usb_suspended ? 1 : 0 );
- break;
- }
- case id_disable_hhkb_blocker_leds:
- {
- *value_data = ( g_config.disable_hhkb_blocker_leds ? 1 : 0 );
- break;
- }
- case id_disable_after_timeout:
- {
- *value_data = g_config.disable_after_timeout;
- break;
- }
- case id_brightness:
- {
- *value_data = g_config.brightness;
- break;
- }
- case id_effect:
- {
- *value_data = g_config.effect;
- break;
- }
- case id_effect_speed:
- {
- *value_data = g_config.effect_speed;
- break;
- }
- case id_color_1:
- {
- _get_color( &(g_config.color_1), value_data );
- break;
- }
- case id_color_2:
- {
- _get_color( &(g_config.color_2), value_data );
- break;
- }
- case id_caps_lock_indicator_color:
- {
- _get_color( &(g_config.caps_lock_indicator.color), value_data );
- break;
- }
- case id_caps_lock_indicator_row_col:
- {
- backlight_get_indicator_row_col( g_config.caps_lock_indicator.index, &(value_data[0]), &(value_data[1]) );
- break;
- }
- case id_layer_1_indicator_color:
- {
- _get_color( &(g_config.layer_1_indicator.color), value_data );
- break;
- }
- case id_layer_1_indicator_row_col:
- {
- backlight_get_indicator_row_col( g_config.layer_1_indicator.index, &(value_data[0]), &(value_data[1]) );
- break;
- }
- case id_layer_2_indicator_color:
- {
- _get_color( &(g_config.layer_2_indicator.color), value_data );
- break;
- }
- case id_layer_2_indicator_row_col:
- {
- backlight_get_indicator_row_col( g_config.layer_2_indicator.index, &(value_data[0]), &(value_data[1]) );
- break;
- }
- case id_layer_3_indicator_color:
- {
- _get_color( &(g_config.layer_3_indicator.color), value_data );
- break;
- }
- case id_layer_3_indicator_row_col:
- {
- backlight_get_indicator_row_col( g_config.layer_3_indicator.index, &(value_data[0]), &(value_data[1]) );
- break;
- }
- case id_alphas_mods:
- {
- for ( int i=0; i<5; i++ )
- {
- *(value_data+i*2) = g_config.alphas_mods[i] >> 8;
- *(value_data+i*2+1) = g_config.alphas_mods[i] & 0xFF;
- }
- }
-#if defined(RGB_BACKLIGHT_M6_B)
- case id_custom_color:
- {
- uint8_t index = value_data[0];
- if ( index >= 0 && index <= 6 )
- {
- _get_color( &(g_config.custom_color[index]), &(value_data[1]) );
- }
- }
-#endif
- }
-}
-
-void backlight_config_set_alphas_mods( uint16_t *alphas_mods )
-{
- for ( int i=0; i<5; i++ )
- {
- g_config.alphas_mods[i] = alphas_mods[i];
- }
-
- backlight_config_save();
-}
-
-void backlight_config_load(void)
-{
- eeprom_read_block( &g_config, ((void*)RGB_BACKLIGHT_CONFIG_EEPROM_ADDR), sizeof(backlight_config) );
-}
-
-void backlight_config_save(void)
-{
- eeprom_update_block( &g_config, ((void*)RGB_BACKLIGHT_CONFIG_EEPROM_ADDR), sizeof(backlight_config) );
-}
-
-void backlight_init_drivers(void)
-{
- // Initialize I2C
- i2c_init();
-
-#if defined(RGB_BACKLIGHT_M6_B)
- IS31FL3218_init();
-#elif defined(RGB_BACKLIGHT_HS60)
- IS31FL3733_init( ISSI_ADDR_1, 0 );
-
- for ( int index = 0; index < DRIVER_LED_TOTAL; index++ )
- {
-#if defined(HS60_ANSI)
- bool enabled = !( ( index == 48-1 ) || //LA48
- ( index == 51-1 ) || //LA51
- ( index == 61-1 ) ); //LA61
-#elif defined(HS60_HHKB)
- bool enabled = !( ( index == 61-1 ) || //LA61
- ( index == 62-1 ) ); //LA62
-#else //HS60_ISO
- bool enabled = !( ( index == 51-1 ) || //LA51
- ( index == 61-1 ) ); //LA61
-#endif
- // This only caches it for later
- IS31FL3733_set_led_control_register( index, enabled, enabled, enabled );
- }
- // This actually updates the LED drivers
- IS31FL3733_update_led_control_registers( ISSI_ADDR_1, 0 );
-#elif defined(RGB_BACKLIGHT_NK65)
- IS31FL3733_init( ISSI_ADDR_1, 0 );
- IS31FL3733_init( ISSI_ADDR_2, 0 );
-
- for ( int index = 0; index < DRIVER_LED_TOTAL; index++ )
- {
- bool enabled = !( ( index == 61-1 ) || //LA61
- ( index > 6+64-1 ) ); //LB7-LB64
- // This only caches it for later
- IS31FL3733_set_led_control_register( index, enabled, enabled, enabled );
- }
- IS31FL3733_set_led_control_register( 7+64-1, 0, 1, 0 ); //Enable LB7 green enable for indicators
- // This actually updates the LED drivers
- IS31FL3733_update_led_control_registers( ISSI_ADDR_1, 0 );
- IS31FL3733_update_led_control_registers( ISSI_ADDR_2, 1 );
-#else
- IS31FL3731_init( ISSI_ADDR_1 );
- IS31FL3731_init( ISSI_ADDR_2 );
-
- for ( int index = 0; index < DRIVER_LED_TOTAL; index++ )
- {
- // OR the possible "disabled" cases together, then NOT the result to get the enabled state
- // LC6 LD13 not present on Zeal65
-#if defined(RGB_BACKLIGHT_ZEAL65)
- bool enabled = !( ( index == 18+5 && !g_config.use_split_backspace ) || // LB5
- ( index == 36+6 ) || // LC6
- ( index == 54+13 ) ); // LD13
-#elif defined(RGB_BACKLIGHT_KOYU)
- bool enabled = !( ( index == 36+15 ) || // LC15
- ( index == 54+13 ) || // LD13
- ( index == 54+17 ) ); // LD17
-#elif defined(RGB_BACKLIGHT_M60_A)
- bool enabled = !(
- // LB6 LB7 LB8 LB15 LB16 LB17 not present on M60-A
- ( index == 18+6 ) || // LB6
- ( index == 18+7 ) || // LB7
- ( index == 18+8 ) || // LB8
- ( index == 18+15 ) || // LB15
- ( index == 18+16 ) || // LB16
- ( index == 18+17 ) || // LB17
- // HHKB blockers (LC17, LD17) and ISO extra keys (LC15,LD13) not present on M60-A
- ( index == 36+17 ) || // LC17
- ( index == 54+17 ) || // LD17
- ( index == 36+15 ) || // LC15
- ( index == 54+13 ) ); // LD13
-#elif defined(RGB_BACKLIGHT_ZEAL60)
- // LB6 LB7 LB8 LB15 LB16 LB17 not present on Zeal60
- bool enabled = !( ( index == 18+5 && !g_config.use_split_backspace ) || // LB5
- ( index == 36+15 && !g_config.use_split_left_shift ) || // LC15
- ( index == 54+8 && !g_config.use_split_right_shift ) || // LD8
- ( index == 54+13 && g_config.use_7u_spacebar ) || // LD13
- ( index == 36+17 && g_config.disable_hhkb_blocker_leds ) || // LC17
- ( index == 54+17 && g_config.disable_hhkb_blocker_leds ) || // LD17
- ( index == 18+6 ) || // LB6
- ( index == 18+7 ) || // LB7
- ( index == 18+8 ) || // LB8
- ( index == 18+15 ) || // LB15
- ( index == 18+16 ) || // LB16
- ( index == 18+17 ) ); // LB17
-#endif
- // This only caches it for later
- IS31FL3731_set_led_control_register( index, enabled, enabled, enabled );
- }
- // This actually updates the LED drivers
- IS31FL3731_update_led_control_registers( ISSI_ADDR_1, ISSI_ADDR_2 );
-#endif // !defined(RGB_BACKLIGHT_M6_B)
-
- // TODO: put the 1 second startup delay here?
-
- // clear the key hits
- for ( int led=0; led<BACKLIGHT_LED_COUNT; led++ )
- {
- g_key_hit[led] = 255;
- }
-}
-
-bool process_record_backlight(uint16_t keycode, keyrecord_t *record)
-{
- // Record keypresses for backlight effects
- if ( record->event.pressed )
- {
- backlight_set_key_hit( record->event.key.row, record->event.key.col );
- }
-
- switch(keycode)
- {
- case BR_INC:
- if (record->event.pressed)
- {
- backlight_brightness_increase();
- }
- return false;
- break;
- case BR_DEC:
- if (record->event.pressed)
- {
- backlight_brightness_decrease();
- }
- return false;
- break;
- case EF_INC:
- if (record->event.pressed)
- {
- backlight_effect_increase();
- }
- return false;
- break;
- case EF_DEC:
- if (record->event.pressed)
- {
- backlight_effect_decrease();
- }
- return false;
- break;
- case ES_INC:
- if (record->event.pressed)
- {
- backlight_effect_speed_increase();
- }
- return false;
- break;
- case ES_DEC:
- if (record->event.pressed)
- {
- backlight_effect_speed_decrease();
- }
- return false;
- break;
- case H1_INC:
- if (record->event.pressed)
- {
- backlight_color_1_hue_increase();
- }
- return false;
- break;
- case H1_DEC:
- if (record->event.pressed)
- {
- backlight_color_1_hue_decrease();
- }
- return false;
- break;
- case S1_INC:
- if (record->event.pressed)
- {
- backlight_color_1_sat_increase();
- }
- return false;
- break;
- case S1_DEC:
- if (record->event.pressed)
- {
- backlight_color_1_sat_decrease();
- break;
- }
- return false;
- break;
- case H2_INC:
- if (record->event.pressed)
- {
- backlight_color_2_hue_increase();
- }
- return false;
- break;
- case H2_DEC:
- if (record->event.pressed)
- {
- backlight_color_2_hue_decrease();
- }
- return false;
- break;
- case S2_INC:
- if (record->event.pressed)
- {
- backlight_color_2_sat_increase();
- }
- return false;
- break;
- case S2_DEC:
- if (record->event.pressed)
- {
- backlight_color_2_sat_decrease();
- break;
- }
- return false;
- break;
- }
-
- return true;
-}
-
-// Deals with the messy details of incrementing an integer
-uint8_t increment( uint8_t value, uint8_t step, uint8_t min, uint8_t max )
-{
- int16_t new_value = value;
- new_value += step;
- return MIN( MAX( new_value, min ), max );
-}
-
-uint8_t decrement( uint8_t value, uint8_t step, uint8_t min, uint8_t max )
-{
- int16_t new_value = value;
- new_value -= step;
- return MIN( MAX( new_value, min ), max );
-}
-
-void backlight_effect_increase(void)
-{
- g_config.effect = increment( g_config.effect, 1, 0, BACKLIGHT_EFFECT_MAX );
- backlight_config_save();
-}
-
-void backlight_effect_decrease(void)
-{
- g_config.effect = decrement( g_config.effect, 1, 0, BACKLIGHT_EFFECT_MAX );
- backlight_config_save();
-}
-
-void backlight_effect_speed_increase(void)
-{
- g_config.effect_speed = increment( g_config.effect_speed, 1, 0, 3 );
- backlight_config_save();
-}
-
-void backlight_effect_speed_decrease(void)
-{
- g_config.effect_speed = decrement( g_config.effect_speed, 1, 0, 3 );
- backlight_config_save();
-}
-
-void backlight_brightness_increase(void)
-{
- g_config.brightness = increment( g_config.brightness, 8, 0, 255 );
- backlight_config_save();
-}
-
-void backlight_brightness_decrease(void)
-{
- g_config.brightness = decrement( g_config.brightness, 8, 0, 255 );
- backlight_config_save();
-}
-
-void backlight_color_1_hue_increase(void)
-{
- g_config.color_1.h = increment( g_config.color_1.h, 8, 0, 255 );
- backlight_config_save();
-}
-
-void backlight_color_1_hue_decrease(void)
-{
- g_config.color_1.h = decrement( g_config.color_1.h, 8, 0, 255 );
- backlight_config_save();
-}
-
-void backlight_color_1_sat_increase(void)
-{
- g_config.color_1.s = increment( g_config.color_1.s, 8, 0, 255 );
- backlight_config_save();
-}
-
-void backlight_color_1_sat_decrease(void)
-{
- g_config.color_1.s = decrement( g_config.color_1.s, 8, 0, 255 );
- backlight_config_save();
-}
-
-void backlight_color_2_hue_increase(void)
-{
- g_config.color_2.h = increment( g_config.color_2.h, 8, 0, 255 );
- backlight_config_save();
-}
-
-void backlight_color_2_hue_decrease(void)
-{
- g_config.color_2.h = decrement( g_config.color_2.h, 8, 0, 255 );
- backlight_config_save();
-}
-
-void backlight_color_2_sat_increase(void)
-{
- g_config.color_2.s = increment( g_config.color_2.s, 8, 0, 255 );
- backlight_config_save();
-}
-
-void backlight_color_2_sat_decrease(void)
-{
- g_config.color_2.s = decrement( g_config.color_2.s, 8, 0, 255 );
- backlight_config_save();
-}
-
-#if defined(RGB_DEBUGGING_ONLY)
-void backlight_test_led( uint8_t index, bool red, bool green, bool blue )
-{
- for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
- {
- if ( i == index )
- {
- IS31FL3731_set_led_control_register( i, red, green, blue );
- }
- else
- {
- IS31FL3731_set_led_control_register( i, false, false, false );
- }
- }
-}
-
-void backlight_debug_led( bool state )
-{
- if (state)
- {
- // Output high.
- DDRE |= (1<<6);
- PORTE |= (1<<6);
- }
- else
- {
- // Output low.
- DDRE &= ~(1<<6);
- PORTE &= ~(1<<6);
- }
-}
-#endif // defined(RGB_DEBUGGING_ONLY)
-
-#endif // BACKLIGHT_ENABLED
+++ /dev/null
-/* Copyright 2017 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#pragma once
-
-#if RGB_BACKLIGHT_ENABLED
-#else
-#error rgb_backlight.h included when RGB_BACKLIGHT_ENABLED == 0
-#endif // RGB_BACKLIGHT_ENABLED
-
-#include <stdint.h>
-#include <stdbool.h>
-
-#include "quantum/color.h"
-
-typedef struct PACKED
-{
- uint8_t h;
- uint8_t s;
-} HS;
-
-typedef struct
-{
- HS color;
- uint8_t index;
-} backlight_config_indicator;
-
-typedef struct
-{
- bool use_split_backspace:1; // |
- bool use_split_left_shift:1; // |
- bool use_split_right_shift:1; // |
- bool use_7u_spacebar:1; // |
- bool use_iso_enter:1; // |
- bool disable_when_usb_suspended:1; // |
- bool disable_hhkb_blocker_leds:1; // |
- bool __pad7:1; // 1 byte
- uint8_t disable_after_timeout; // 1 byte
- uint8_t brightness; // 1 byte
- uint8_t effect; // 1 byte
- uint8_t effect_speed; // 1 byte
- HS color_1; // 2 bytes
- HS color_2; // 2 bytes
- backlight_config_indicator caps_lock_indicator; // 3 bytes
- backlight_config_indicator layer_1_indicator; // 3 bytes
- backlight_config_indicator layer_2_indicator; // 3 bytes
- backlight_config_indicator layer_3_indicator; // 3 bytes
- uint16_t alphas_mods[5]; // 10 bytes
-#if defined(RGB_BACKLIGHT_M6_B)
- HS custom_color[6]; // 12 bytes
-#endif
-} backlight_config; // = 31 bytes (M6-B = 43 bytes)
-
-void backlight_config_load(void);
-void backlight_config_save(void);
-void backlight_config_set_value( uint8_t *data );
-void backlight_config_get_value( uint8_t *data );
-
-void backlight_init_drivers(void);
-
-void backlight_timer_init(void);
-void backlight_timer_enable(void);
-void backlight_timer_disable(void);
-
-void backlight_set_suspend_state(bool state);
-void backlight_set_indicator_state(uint8_t state);
-
-// This should not be called from an interrupt
-// (eg. from a timer interrupt).
-// Call this while idle (in between matrix scans).
-// If the buffer is dirty, it will update the driver with the buffer.
-void backlight_update_pwm_buffers(void);
-
-// Handle backlight specific keycodes
-bool process_record_backlight(uint16_t keycode, keyrecord_t *record);
-
-void backlight_set_key_hit(uint8_t row, uint8_t col);
-
-void backlight_effect_increase(void);
-void backlight_effect_decrease(void);
-void backlight_effect_speed_increase(void);
-void backlight_effect_speed_decrease(void);
-
-void backlight_brightness_increase(void);
-void backlight_brightness_decrease(void);
-
-void backlight_color_1_hue_increase(void);
-void backlight_color_1_hue_decrease(void);
-void backlight_color_1_sat_increase(void);
-void backlight_color_1_sat_decrease(void);
-void backlight_color_2_hue_increase(void);
-void backlight_color_2_hue_decrease(void);
-void backlight_color_2_sat_increase(void);
-void backlight_color_2_sat_decrease(void);
-
-void backlight_test_led( uint8_t index, bool red, bool green, bool blue );
-void backlight_debug_led(bool state);
-
+++ /dev/null
-/* Copyright 2017 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#pragma once
-
-enum backlight_config_value
-{
- id_use_split_backspace = 0x01,
- id_use_split_left_shift = 0x02,
- id_use_split_right_shift = 0x03,
- id_use_7u_spacebar = 0x04,
- id_use_iso_enter = 0x05,
- id_disable_hhkb_blocker_leds = 0x06,
- id_disable_when_usb_suspended = 0x07,
- id_disable_after_timeout = 0x08,
- id_brightness = 0x09,
- id_effect = 0x0A,
- id_effect_speed = 0x0B,
- id_color_1 = 0x0C,
- id_color_2 = 0x0D,
- id_caps_lock_indicator_color = 0x0E,
- id_caps_lock_indicator_row_col = 0x0F,
- id_layer_1_indicator_color = 0x10,
- id_layer_1_indicator_row_col = 0x11,
- id_layer_2_indicator_color = 0x12,
- id_layer_2_indicator_row_col = 0x13,
- id_layer_3_indicator_color = 0x14,
- id_layer_3_indicator_row_col = 0x15,
- id_alphas_mods = 0x16,
- id_custom_color = 0x17
-};
+++ /dev/null
-/* Copyright 2017 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#pragma once
-
-// This is hardcoded at 0x5F00 so it's well after keycode value SAFE_RANGE
-enum backlight_keycodes {
- BR_INC = 0x5F00, // backlight brightness increase
- BR_DEC, // backlight brightness decrease
- EF_INC, // backlight effect increase
- EF_DEC, // backlight effect decrease
- ES_INC,
- ES_DEC,
- H1_INC,
- H1_DEC,
- S1_INC,
- S1_DEC,
- H2_INC,
- H2_DEC,
- S2_INC,
- S2_DEC
-};
+++ /dev/null
-
-
-# project specific files
-SRC = rgb_backlight.c \
- quantum/color.c \
- drivers/issi/is31fl3731.c \
- drivers/avr/i2c_master.c
-
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-# Boot Section
-BOOTLOADER = atmel-dfu
-
-# Do not put the microcontroller into power saving mode
-# when we get USB suspend event. We want it to keep updating
-# backlight effects.
-OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
-
-# Build Options
-# change to "no" to disable the options, or define them in the Makefile in
-# the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = no # Console for debug(+400)
-COMMAND_ENABLE = no # Commands for debug and configuration
-NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
-MIDI_ENABLE = no # MIDI controls
-AUDIO_ENABLE = no # Audio output on port C6
-UNICODE_ENABLE = no # Unicode
-BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
-
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
-
-RAW_ENABLE = yes
-DYNAMIC_KEYMAP_ENABLE = yes
-CIE1931_CURVE = yes
-
-LAYOUTS = 60_ansi 60_iso 60_hhkb 60_ansi_split_bs_rshift
+++ /dev/null
-/* Copyright 2017 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#include "zeal60.h"
-#include "zeal60_api.h"
-
-// Check that no backlight functions are called
-#if RGB_BACKLIGHT_ENABLED
-#include "rgb_backlight.h"
-#endif // BACKLIGHT_ENABLED
-
-#include "raw_hid.h"
-#include "dynamic_keymap.h"
-#include "timer.h"
-#include "tmk_core/common/eeprom.h"
-
-bool eeprom_is_valid(void)
-{
- return (eeprom_read_word(((void*)EEPROM_MAGIC_ADDR)) == EEPROM_MAGIC &&
- eeprom_read_byte(((void*)EEPROM_VERSION_ADDR)) == EEPROM_VERSION);
-}
-
-void eeprom_set_valid(bool valid)
-{
- eeprom_update_word(((void*)EEPROM_MAGIC_ADDR), valid ? EEPROM_MAGIC : 0xFFFF);
- eeprom_update_byte(((void*)EEPROM_VERSION_ADDR), valid ? EEPROM_VERSION : 0xFF);
-}
-
-void eeprom_reset(void)
-{
- // Set the Zeal60 specific EEPROM state as invalid.
- eeprom_set_valid(false);
- // Set the TMK/QMK EEPROM state as invalid.
- eeconfig_disable();
-}
-
-#ifdef RAW_ENABLE
-
-void raw_hid_receive( uint8_t *data, uint8_t length )
-{
- uint8_t *command_id = &(data[0]);
- uint8_t *command_data = &(data[1]);
- switch ( *command_id )
- {
- case id_get_protocol_version:
- {
- command_data[0] = PROTOCOL_VERSION >> 8;
- command_data[1] = PROTOCOL_VERSION & 0xFF;
- break;
- }
- case id_get_keyboard_value:
- {
- if ( command_data[0] == id_uptime )
- {
- uint32_t value = timer_read32();
- command_data[1] = (value >> 24 ) & 0xFF;
- command_data[2] = (value >> 16 ) & 0xFF;
- command_data[3] = (value >> 8 ) & 0xFF;
- command_data[4] = value & 0xFF;
- }
- else
- {
- *command_id = id_unhandled;
- }
- break;
- }
-#ifdef DYNAMIC_KEYMAP_ENABLE
- case id_dynamic_keymap_get_keycode:
- {
- uint16_t keycode = dynamic_keymap_get_keycode( command_data[0], command_data[1], command_data[2] );
- command_data[3] = keycode >> 8;
- command_data[4] = keycode & 0xFF;
- break;
- }
- case id_dynamic_keymap_set_keycode:
- {
- dynamic_keymap_set_keycode( command_data[0], command_data[1], command_data[2], ( command_data[3] << 8 ) | command_data[4] );
- break;
- }
- case id_dynamic_keymap_reset:
- {
- dynamic_keymap_reset();
- break;
- }
- case id_dynamic_keymap_macro_get_count:
- {
- command_data[0] = dynamic_keymap_macro_get_count();
- break;
- }
- case id_dynamic_keymap_macro_get_buffer_size:
- {
- uint16_t size = dynamic_keymap_macro_get_buffer_size();
- command_data[0] = size >> 8;
- command_data[1] = size & 0xFF;
- break;
- }
- case id_dynamic_keymap_macro_get_buffer:
- {
- uint16_t offset = ( command_data[0] << 8 ) | command_data[1];
- uint16_t size = command_data[2]; // size <= 28
- dynamic_keymap_macro_get_buffer( offset, size, &command_data[3] );
- break;
- }
- case id_dynamic_keymap_macro_set_buffer:
- {
- uint16_t offset = ( command_data[0] << 8 ) | command_data[1];
- uint16_t size = command_data[2]; // size <= 28
- dynamic_keymap_macro_set_buffer( offset, size, &command_data[3] );
- break;
- }
- case id_dynamic_keymap_macro_reset:
- {
- dynamic_keymap_macro_reset();
- break;
- }
- case id_dynamic_keymap_get_layer_count:
- {
- command_data[0] = dynamic_keymap_get_layer_count();
- break;
- }
- case id_dynamic_keymap_get_buffer:
- {
- uint16_t offset = ( command_data[0] << 8 ) | command_data[1];
- uint16_t size = command_data[2]; // size <= 28
- dynamic_keymap_get_buffer( offset, size, &command_data[3] );
- break;
- }
- case id_dynamic_keymap_set_buffer:
- {
- uint16_t offset = ( command_data[0] << 8 ) | command_data[1];
- uint16_t size = command_data[2]; // size <= 28
- dynamic_keymap_set_buffer( offset, size, &command_data[3] );
- break;
- }
-#endif // DYNAMIC_KEYMAP_ENABLE
-#if RGB_BACKLIGHT_ENABLED
- case id_backlight_config_set_value:
- {
- backlight_config_set_value(command_data);
- break;
- }
- case id_backlight_config_get_value:
- {
- backlight_config_get_value(command_data);
- break;
- }
- case id_backlight_config_save:
- {
- backlight_config_save();
- break;
- }
-#endif // RGB_BACKLIGHT_ENABLED
- case id_eeprom_reset:
- {
- eeprom_reset();
- break;
- }
- case id_bootloader_jump:
- {
- // Need to send data back before the jump
- // Informs host that the command is handled
- raw_hid_send( data, length );
- // Give host time to read it
- wait_ms(100);
- bootloader_jump();
- break;
- }
- default:
- {
- // Unhandled message.
- *command_id = id_unhandled;
- break;
- }
- }
-
- // Return same buffer with values changed
- raw_hid_send( data, length );
-
-}
-
-#endif
-
-void main_init(void)
-{
- // If the EEPROM has the magic, the data is good.
- // OK to load from EEPROM.
- if (eeprom_is_valid()) {
-#if RGB_BACKLIGHT_ENABLED
- backlight_config_load();
-#endif // RGB_BACKLIGHT_ENABLED
- } else {
-#if RGB_BACKLIGHT_ENABLED
- // If the EEPROM has not been saved before, or is out of date,
- // save the default values to the EEPROM. Default values
- // come from construction of the zeal_backlight_config instance.
- backlight_config_save();
-#endif // RGB_BACKLIGHT_ENABLED
-#ifdef DYNAMIC_KEYMAP_ENABLE
- // This resets the keymaps in EEPROM to what is in flash.
- dynamic_keymap_reset();
- // This resets the macros in EEPROM to nothing.
- dynamic_keymap_macro_reset();
-#endif
- // Save the magic number last, in case saving was interrupted
- eeprom_set_valid(true);
- }
-
-#if RGB_BACKLIGHT_ENABLED
- // Initialize LED drivers for backlight.
- backlight_init_drivers();
-
- backlight_timer_init();
- backlight_timer_enable();
-#endif // RGB_BACKLIGHT_ENABLED
-}
-
-void bootmagic_lite(void)
-{
- // The lite version of TMK's bootmagic.
- // 100% less potential for accidentally making the
- // keyboard do stupid things.
-
- // We need multiple scans because debouncing can't be turned off.
- matrix_scan();
- wait_ms(DEBOUNCE);
- wait_ms(DEBOUNCE);
- matrix_scan();
-
- // If the Esc (matrix 0,0) is held down on power up,
- // reset the EEPROM valid state and jump to bootloader.
- if ( matrix_get_row(0) & (1<<0) ) {
- eeprom_reset();
- bootloader_jump();
- }
-}
-
-void matrix_init_kb(void)
-{
- bootmagic_lite();
- main_init();
- matrix_init_user();
-}
-
-void matrix_scan_kb(void)
-{
-#if RGB_BACKLIGHT_ENABLED
- // This only updates the LED driver buffers if something has changed.
- backlight_update_pwm_buffers();
-#endif // BACKLIGHT_ENABLED
- matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record)
-{
-#if RGB_BACKLIGHT_ENABLED
- process_record_backlight(keycode, record);
-#endif // BACKLIGHT_ENABLED
-
- switch(keycode) {
- case FN_MO13:
- if (record->event.pressed) {
- layer_on(1);
- update_tri_layer(1, 2, 3);
- } else {
- layer_off(1);
- update_tri_layer(1, 2, 3);
- }
- return false;
- break;
- case FN_MO23:
- if (record->event.pressed) {
- layer_on(2);
- update_tri_layer(1, 2, 3);
- } else {
- layer_off(2);
- update_tri_layer(1, 2, 3);
- }
- return false;
- break;
- }
-
-#ifdef DYNAMIC_KEYMAP_ENABLE
- // Handle macros
- if (record->event.pressed) {
- if ( keycode >= MACRO00 && keycode <= MACRO15 )
- {
- uint8_t id = keycode - MACRO00;
- dynamic_keymap_macro_send(id);
- return false;
- }
- }
-#endif //DYNAMIC_KEYMAP_ENABLE
-
- return process_record_user(keycode, record);
-}
-
-// This overrides the one in quantum/keymap_common.c
-uint16_t keymap_function_id_to_action( uint16_t function_id )
-{
- // Zeal60 specific "action functions" are 0xF00 to 0xFFF
- // i.e. F(0xF00) to F(0xFFF) are mapped to
- // enum zeal60_action_functions by masking last 8 bits.
- if ( function_id >= 0x0F00 && function_id <= 0x0FFF )
- {
- uint8_t id = function_id & 0xFF;
- switch ( id ) {
- case TRIPLE_TAP_1_3:
- case TRIPLE_TAP_2_3:
- {
- return ACTION_FUNCTION_TAP(id);
- break;
- }
- default:
- break;
- }
- }
-
- return pgm_read_word(&fn_actions[function_id]);
-}
-
-
-// Zeal60 specific "action functions"
-void action_function(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
- switch (id)
- {
- case TRIPLE_TAP_1_3:
- case TRIPLE_TAP_2_3:
- if (record->event.pressed) {
- layer_on( id == TRIPLE_TAP_1_3 ? 1 : 2 );
- if (record->tap.count && !record->tap.interrupted) {
- if (record->tap.count >= 3) {
- layer_invert(3);
- }
- } else {
- record->tap.count = 0;
- }
- } else {
- layer_off( id == TRIPLE_TAP_1_3 ? 1 : 2 );
- }
- break;
- }
-}
-
-void led_set_kb(uint8_t usb_led)
-{
-#if RGB_BACKLIGHT_ENABLED
- backlight_set_indicator_state(usb_led);
-#endif // RGB_BACKLIGHT_ENABLED
-}
-
-void suspend_power_down_kb(void)
-{
-#if RGB_BACKLIGHT_ENABLED
- backlight_set_suspend_state(true);
-#endif // RGB_BACKLIGHT_ENABLED
-}
-
-void suspend_wakeup_init_kb(void)
-{
-#if RGB_BACKLIGHT_ENABLED
- backlight_set_suspend_state(false);
-#endif // RGB_BACKLIGHT_ENABLED
-}
+++ /dev/null
-/* Copyright 2017 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#pragma once
-
-#include "quantum.h"
-#include "rgb_backlight_keycodes.h"
-#include "zeal60_keycodes.h"
-
-#define XXX KC_NO
-
-#define LAYOUT_60_all( \
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D, \
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \
- K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
- K40, K41, K42, K47, K4A, K4B, K4C, K4D \
-) { \
- { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
- { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
- { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \
- { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \
- { K40, K41, K42, XXX, XXX, XXX, XXX, K47, XXX, XXX, K4A, K4B, K4C, K4D } \
-}
-
-#define LAYOUT_60_ansi( \
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \
- K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, \
- K40, K41, K42, K47, K4A, K4B, K4C, K4D \
-) { \
- { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
- { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
- { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, XXX }, \
- { K30, XXX, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, XXX }, \
- { K40, K41, K42, XXX, XXX, XXX, XXX, K47, XXX, XXX, K4A, K4B, K4C, K4D } \
-}
-
-#define LAYOUT_60_iso( \
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \
- K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, \
- K40, K41, K42, K47, K4A, K4B, K4C, K4D \
-) { \
- { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
- { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
- { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, XXX }, \
- { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, XXX }, \
- { K40, K41, K42, XXX, XXX, XXX, XXX, K47, XXX, XXX, K4A, K4B, K4C, K4D } \
-}
-
-#define LAYOUT_60_ansi_split_bs_rshift( \
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D, \
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \
- K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
- K40, K41, K42, K47, K4A, K4B, K4C, K4D \
-) { \
- { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
- { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
- { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \
- { K30, XXX, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \
- { K40, K41, K42, XXX, XXX, XXX, XXX, K47, XXX, XXX, K4A, K4B, K4C, K4D } \
-}
-
-#define LAYOUT_60_hhkb( \
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D, \
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \
- K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
- K41, K42, K47, K4B, K4C \
-) { \
- { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
- { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
- { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \
- { K30, XXX, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \
- { XXX, K41, K42, XXX, XXX, XXX, XXX, K47, XXX, XXX, XXX, K4B, K4C, XXX } \
-}
-
+++ /dev/null
-/* Copyright 2017 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#pragma once
-
-#define PROTOCOL_VERSION 0x0008
-
-enum zeal60_command_id
-{
- id_get_protocol_version = 0x01, // always 0x01
- id_get_keyboard_value,
- id_set_keyboard_value,
- id_dynamic_keymap_get_keycode,
- id_dynamic_keymap_set_keycode,
- id_dynamic_keymap_reset,
- id_backlight_config_set_value,
- id_backlight_config_get_value,
- id_backlight_config_save,
- id_eeprom_reset,
- id_bootloader_jump,
- id_dynamic_keymap_macro_get_count,
- id_dynamic_keymap_macro_get_buffer_size,
- id_dynamic_keymap_macro_get_buffer,
- id_dynamic_keymap_macro_set_buffer,
- id_dynamic_keymap_macro_reset,
- id_dynamic_keymap_get_layer_count,
- id_dynamic_keymap_get_buffer,
- id_dynamic_keymap_set_buffer,
- id_unhandled = 0xFF,
-};
-
-enum zeal60_keyboard_value_id
-{
- id_uptime = 0x01,
- id_firmware_version
-};
-
+++ /dev/null
-/* Copyright 2017 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#pragma once
-
-// Can't use SAFE_RANGE here, it might change if someone adds
-// new values to enum quantum_keycodes.
-// Need to keep checking 0x5F10 is still in the safe range.
-// TODO: merge this into quantum_keycodes
-// Backlight keycodes are in range 0x5F00-0x5F0F
-enum zeal60_keycodes {
- FN_MO13 = 0x5F10,
- FN_MO23,
- MACRO00,
- MACRO01,
- MACRO02,
- MACRO03,
- MACRO04,
- MACRO05,
- MACRO06,
- MACRO07,
- MACRO08,
- MACRO09,
- MACRO10,
- MACRO11,
- MACRO12,
- MACRO13,
- MACRO14,
- MACRO15,
-};
-
-enum user_keycodes {
- USER00 = 0x5F80,
- USER01,
- USER02,
- USER03,
- USER04,
- USER05,
- USER06,
- USER07,
- USER08,
- USER09,
- USER10,
- USER11,
- USER12,
- USER13,
- USER14,
- USER15,
-};
-
-// Zeal60 specific "action functions"
-// These are only valid IDs in action_function()
-// Use FN_TT13, FN_TT23, etc. in keymaps
-enum zeal60_action_functions {
- TRIPLE_TAP_1_3 = 0x31,
- TRIPLE_TAP_2_3 = 0x32
-};
-
-// Bitwise OR the above with 0x0F00 to use in F(x) macro
-// This reserves the top 256 of the 4096 range of F(x) keycodes,
-// leaving the rest for use in fn_actions[] or actions in EEPROM.
-#define FN_TT13 F((0x0F00|TRIPLE_TAP_1_3))
-#define FN_TT23 F((0x0F00|TRIPLE_TAP_2_3))
-
-#define TG_NKRO MAGIC_TOGGLE_NKRO
+++ /dev/null
-/* Copyright 2017 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#pragma once
-
-#include "config_common.h"
-
-// USB Device descriptor parameter
-#define VENDOR_ID 0x5A45 // ZealPC ("ZE")
-#define PRODUCT_ID 0x0065 // Zeal65
-#define DEVICE_VER 0x0001
-#define MANUFACTURER ZealPC
-#define PRODUCT Zeal65
-#define DESCRIPTION Zeal65
-
-// key matrix size
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 15
-
-// Zeal60 PCB default pin-out
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 }
-#define UNUSED_PINS
-
-// IS31FL3731 driver
-#define DRIVER_COUNT 2
-#define DRIVER_LED_TOTAL 72
-
-// COL2ROW or ROW2COL
-#define DIODE_DIRECTION COL2ROW
-
-// Set 0 if debouncing isn't needed
-#define DEBOUNCE 5
-
-// Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap
-#define LOCKING_SUPPORT_ENABLE
-// Locking resynchronize hack
-#define LOCKING_RESYNC_ENABLE
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-// disable debug print
-//#define NO_DEBUG
-
-// disable print
-//#define NO_PRINT
-
-// disable action features
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-#define RGB_BACKLIGHT_ENABLED 1
-
-// This conditionally compiles the backlight code for Zeal65 specifics
-#define RGB_BACKLIGHT_ZEAL65
-
-// enable/disable LEDs based on layout
-#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0
-#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0 // Unused
-#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0 // Unused
-#define RGB_BACKLIGHT_USE_7U_SPACEBAR 1 // Used only for stab LED matching spacebar LED
-#define RGB_BACKLIGHT_USE_ISO_ENTER 0 // Unused
-#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0
-
-// disable backlight when USB suspended (PC sleep/hibernate/shutdown)
-#define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0
-
-// disable backlight after timeout in minutes, 0 = no timeout
-#define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0
-
-// the default brightness
-#define RGB_BACKLIGHT_BRIGHTNESS 255
-
-// the default effect (RGB test)
-#define RGB_BACKLIGHT_EFFECT 255
-
-// the default effect speed (0-3)
-#define RGB_BACKLIGHT_EFFECT_SPEED 0
-
-// the default color1 and color2
-#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 }
-#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 }
-
-// These define which keys in the matrix are alphas/mods
-// Used for backlight effects so colors are different for
-// alphas vs. mods
-// Each value is for a row, bit 0 is column 0
-// Alpha=0 Mod=1
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0b0110000000000001
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0b0100000000000001
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0b0101000000000001
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0111000000000001
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0111110000000011
-
-#define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
-#define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
-#define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
-#define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
-
-#define DYNAMIC_KEYMAP_LAYER_COUNT 4
-
-// EEPROM usage
-
-// TODO: refactor with new user EEPROM code (coming soon)
-#define EEPROM_MAGIC 0x451F
-#define EEPROM_MAGIC_ADDR 32
-// Bump this every time we change what we store
-// This will automatically reset the EEPROM with defaults
-// and avoid loading invalid data from the EEPROM
-#define EEPROM_VERSION 0x08
-#define EEPROM_VERSION_ADDR 34
-
-// Backlight config starts after EEPROM version
-#define RGB_BACKLIGHT_CONFIG_EEPROM_ADDR 35
-// Dynamic keymap starts after backlight config (35+31)
-#define DYNAMIC_KEYMAP_EEPROM_ADDR 66
-// Dynamic macro starts after dynamic keymaps (66+(4*5*15*2)) = (66+600)
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 666
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 358
-#define DYNAMIC_KEYMAP_MACRO_COUNT 16
+++ /dev/null
-{
- "keyboard_name": "Zeal65",
- "url": "",
- "maintainer": "Wilba",
- "bootloader": "DFU",
- "width": 16,
- "height": 5,
- "layouts": {
- "LAYOUT_65_split_bs": {
- "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"Del", "x":14, "y":0}, {"label":"Home", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Backspace", "x":13.5, "y":1, "w":1.5}, {"label":"PgUp", "x":15, "y":1}, {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"PgDn", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"\u2191", "x":14, "y":3}, {"label":"End", "x":15, "y":3}, {"label":"Win", "x":0, "y":4, "w":1.5}, {"label":"Alt", "x":1.5, "y":4, "w":1.5}, {"x":3, "y":4, "w":7}, {"label":"Fn2", "x":10, "y":4, "w":1.5}, {"label":"Fn1", "x":11.5, "y":4, "w":1.5}, {"label":"\u2190", "x":13, "y":4}, {"label":"\u2193", "x":14, "y":4}, {"label":"\u2192", "x":15, "y":4}]
- },
- "LAYOUT_65_normie": {
- "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Home", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"PgUp", "x":15, "y":1}, {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"PgDn", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"\u2191", "x":14, "y":3}, {"label":"End", "x":15, "y":3}, {"label":"Win", "x":0, "y":4, "w":1.5}, {"label":"Alt", "x":1.5, "y":4, "w":1.5}, {"x":3, "y":4, "w":7}, {"label":"Fn2", "x":10, "y":4, "w":1.5}, {"label":"Fn1", "x":11.5, "y":4, "w":1.5}, {"label":"\u2190", "x":13, "y":4}, {"label":"\u2193", "x":14, "y":4}, {"label":"\u2192", "x":15, "y":4}]
- }
- }
-}
\ No newline at end of file
+++ /dev/null
-#pragma once
-
-/* enable/disable LEDs based on layout */
-#undef RGB_BACKLIGHT_USE_SPLIT_BACKSPACE
-#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0
+++ /dev/null
-// Default layout for Zeal65
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-// Default layer
-[0] = LAYOUT_65_normie(
- KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME,
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP,
- KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN,
- KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END,
- KC_LCTL, KC_LALT, KC_SPC, FN_MO23, FN_MO13, KC_LEFT, KC_DOWN, KC_RGHT),
-
-// Fn1 Layer
-[1] = LAYOUT_65_normie(
- KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
-// Fn2 Layer
-[2] = LAYOUT_65_normie(
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
-// Fn3 Layer (zeal60 Configuration)
-[3] = LAYOUT_65_normie(
- KC_TRNS, EF_DEC, EF_INC, H1_DEC, H1_INC, H2_DEC, H2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BR_DEC, BR_INC, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, S1_DEC, S1_INC, S2_DEC, S2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
-};
+++ /dev/null
-#pragma once
-
-/* enable/disable LEDs based on layout */
-#undef RGB_BACKLIGHT_USE_SPLIT_BACKSPACE
-#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 1
+++ /dev/null
-// Split-backspace layout for Zeal65
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-// Default layer
-[0] = LAYOUT_65_split_bs(
- KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_DEL, KC_HOME,
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_PGUP,
- KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN,
- KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END,
- KC_LGUI, KC_LALT, KC_SPC, FN_MO23, FN_MO13, KC_LEFT, KC_DOWN, KC_RGHT),
-
-// Fn1 Layer
-[1] = LAYOUT_65_split_bs(
- KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, KC_TRNS,
- KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
-// Fn2 Layer
-[2] = LAYOUT_65_split_bs(
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
-// Fn3 Layer (zeal60 Configuration)
-[3] = LAYOUT_65_split_bs(
- KC_TRNS, EF_DEC, EF_INC, H1_DEC, H1_INC, H2_DEC, H2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BR_DEC, BR_INC, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, S1_DEC, S1_INC, S2_DEC, S2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
-};
+++ /dev/null
-Zeal65
-====
-
-
-
-This is a 65% PCB with per-key RGB LEDs and supports fixed, 1800-like bottom row and split backspace. It was designed for the Zephyr custom keyboard.
-
-Keyboard Maintainer: [Wilba](http://wilba.tech/) and on [github](https://github.com/Wilba6582)
-Hardware Supported: Zeal65 PCB Rev 1
-Hardware Availability: https://zealpc.net/collections/group-buy-pre-orders/products/zephyr
-
-Make example for this keyboard (after setting up your build environment):
-
- make zeal65:default
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+++ /dev/null
-
-
-# project specific files
-SRC = keyboards/zeal60/zeal60.c \
- keyboards/zeal60/rgb_backlight.c \
- quantum/color.c \
- drivers/issi/is31fl3731.c \
- drivers/avr/i2c_master.c
-
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-# Boot Section
-BOOTLOADER = atmel-dfu
-
-# Do not put the microcontroller into power saving mode
-# when we get USB suspend event. We want it to keep updating
-# backlight effects.
-OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
-
-# Build Options
-# change to "no" to disable the options, or define them in the Makefile in
-# the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = no # Console for debug(+400)
-COMMAND_ENABLE = no # Commands for debug and configuration
-NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
-MIDI_ENABLE = no # MIDI controls
-AUDIO_ENABLE = no # Audio output on port C6
-UNICODE_ENABLE = no # Unicode
-BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
-
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
-
-RAW_ENABLE = yes
-DYNAMIC_KEYMAP_ENABLE = yes
-CIE1931_CURVE = yes
+++ /dev/null
-/* Copyright 2017 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#ifndef RGB_BACKLIGHT_ZEAL65
-#error RGB_BACKLIGHT_ZEAL65 not defined, you done goofed somehao, brah
-#endif
+++ /dev/null
-/* Copyright 2017 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#pragma once
-
-#include "quantum.h"
-#include "../zeal60/rgb_backlight_keycodes.h"
-#include "../zeal60/zeal60_keycodes.h"
-
-#define XXX KC_NO
-
-#define LAYOUT_65_split_bs( \
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D, K0E, \
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2E, \
- K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \
- K40, K41, K47, K4A, K4B, K4C, K4D, K4E \
-) { \
- { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \
- { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \
- { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E }, \
- { K30, XXX, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \
- { K40, K41, XXX, XXX, XXX, XXX, XXX, K47, XXX, XXX, K4A, K4B, K4C, K4D, K4E } \
-}
-
-#define LAYOUT_65_normie( \
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2E, \
- K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \
- K40, K41, K47, K4A, K4B, K4C, K4D, K4E \
-) { \
- { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \
- { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \
- { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, XXX, K2E }, \
- { K30, XXX, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \
- { K40, K41, XXX, XXX, XXX, XXX, XXX, K47, XXX, XXX, K4A, K4B, K4C, K4D, K4E } \
-}
}
// This actually updates the LED drivers
#ifdef IS31FL3731
- IS31FL3731_update_led_control_registers( DRIVER_ADDR_1, DRIVER_ADDR_2 );
+ IS31FL3731_update_led_control_registers( DRIVER_ADDR_1, 0 );
+ IS31FL3731_update_led_control_registers( DRIVER_ADDR_2, 1 );
#elif defined(IS31FL3733)
IS31FL3733_update_led_control_registers( DRIVER_ADDR_1, 0 );
IS31FL3733_update_led_control_registers( DRIVER_ADDR_2, 1 );
#ifdef IS31FL3731
static void flush( void )
{
- IS31FL3731_update_pwm_buffers( DRIVER_ADDR_1, DRIVER_ADDR_2 );
+ IS31FL3731_update_pwm_buffers( DRIVER_ADDR_1, 0 );
+ IS31FL3731_update_pwm_buffers( DRIVER_ADDR_2, 1 );
}
const rgb_matrix_driver_t rgb_matrix_driver = {
projects / qmk_firmware.git / commitdiff