]> git.donarmstrong.com Git - qmk_firmware.git/blob - protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHost/MouseHost.txt
Squashed 'tmk_core/' changes from caca2c0..dc0e46e
[qmk_firmware.git] / protocol / lufa / LUFA-git / Demos / Host / LowLevel / MouseHost / MouseHost.txt
1 /** \file
2  *
3  *  This file contains special DoxyGen information for the generation of the main page and other special
4  *  documentation pages. It is not a project source file.
5  */
6
7 /** \mainpage Mouse Host Demo
8  *
9  *  \section Sec_Compat Demo Compatibility:
10  *
11  *  The following list indicates what microcontrollers are compatible with this demo.
12  *
13  *  \li Series 7 USB AVRs (AT90USBxxx7)
14  *
15  *  \section Sec_Info USB Information:
16  *
17  *  The following table gives a rundown of the USB utilization of this demo.
18  *
19  *  <table>
20  *   <tr>
21  *    <td><b>USB Mode:</b></td>
22  *    <td>Host</td>
23  *   </tr>
24  *   <tr>
25  *    <td><b>USB Class:</b></td>
26  *    <td>Human Interface Device (HID)</td>
27  *   </tr>
28  *   <tr>
29  *    <td><b>USB Subclass:</b></td>
30  *    <td>N/A</td>
31  *   </tr>
32  *   <tr>
33  *    <td><b>Relevant Standards:</b></td>
34  *    <td>USBIF HID Specification \n
35  *        USBIF HID Usage Tables</td>
36  *   </tr>
37  *   <tr>
38  *    <td><b>Supported USB Speeds:</b></td>
39  *    <td>Low Speed Mode \n
40  *        Full Speed Mode</td>
41  *   </tr>
42  *  </table>
43  *
44  *  \section Sec_Description Project Description:
45  *
46  *  Mouse host demonstration application. This gives a simple reference
47  *  application for implementing a USB Mouse host, for USB mice using
48  *  the standard mouse HID profile.
49  *
50  *  Mouse movement and button presses are displayed on the board LEDs,
51  *  as well as printed out the serial terminal as formatted dY, dY and
52  *  button status information.
53  *
54  *  This uses a naive method where the mouse is set to Boot Protocol mode, so
55  *  that the report structure is fixed and known. A better implementation
56  *  uses the HID report parser for correct report data processing across
57  *  all compatible mice with advanced characteristics, as shown in the
58  *  MouseHostWithParser demo application.
59  *
60  *  Currently only single interface mice are supported.
61  *
62  *  \section Sec_Options Project Options
63  *
64  *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
65  *
66  *  <table>
67  *   <tr>
68  *    <td>
69  *     None
70  *    </td>
71  *   </tr>
72  *  </table>
73  */
74