]> git.donarmstrong.com Git - qmk_firmware.git/blob - lib/lufa/Bootloaders/DFU/makefile
Expand bootloader target to support most AVR boards (#6255)
[qmk_firmware.git] / lib / lufa / Bootloaders / DFU / makefile
1 #
2 #             LUFA Library
3 #     Copyright (C) Dean Camera, 2017.
4 #
5 #  dean [at] fourwalledcubicle [dot] com
6 #           www.lufa-lib.org
7 #
8 # --------------------------------------
9 #         LUFA Project Makefile.
10 # --------------------------------------
11
12 # Run "make help" for target help.
13
14 MCU          ?= atmega32u4
15 ARCH         ?= AVR8
16 BOARD        ?= QMK
17 F_CPU        ?= 16000000
18 F_USB        ?= $(F_CPU)
19 OPTIMIZATION = s
20 TARGET       = BootloaderDFU
21 SRC          = $(TARGET).c Descriptors.c BootloaderAPI.c BootloaderAPITable.S $(LUFA_SRC_USB)
22 LUFA_PATH    = ../../LUFA
23 CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/ -DBOOT_START_ADDR=$(BOOT_START_OFFSET)
24 LD_FLAGS     = -Wl,--section-start=.text=$(BOOT_START_OFFSET) $(BOOT_API_LD_FLAGS)
25
26 # Flash size and bootloader section sizes of the target, in KB. These must
27 # match the target's total FLASH size and the bootloader size set in the
28 # device's fuses.
29 FLASH_SIZE_KB         ?= 32
30 BOOT_SECTION_SIZE_KB  ?= 4
31
32 # Bootloader address calculation formulas
33 # Do not modify these macros, but rather modify the dependent values above.
34 CALC_ADDRESS_IN_HEX   = $(shell printf "0x%X" $$(( $(1) )) )
35 BOOT_START_OFFSET     = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024 )
36 BOOT_SEC_OFFSET       = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) * 1024) - ($(strip $(1))) )
37
38 # Bootloader linker section flags for relocating the API table sections to
39 # known FLASH addresses - these should not normally be user-edited.
40 BOOT_SECTION_LD_FLAG  = -Wl,--section-start=$(strip $(1))=$(call BOOT_SEC_OFFSET, $(3)) -Wl,--undefined=$(strip $(2))
41 BOOT_API_LD_FLAGS     = $(call BOOT_SECTION_LD_FLAG, .apitable_trampolines, BootloaderAPI_Trampolines, 96)
42 BOOT_API_LD_FLAGS    += $(call BOOT_SECTION_LD_FLAG, .apitable_jumptable,   BootloaderAPI_JumpTable,   32)
43 BOOT_API_LD_FLAGS    += $(call BOOT_SECTION_LD_FLAG, .apitable_signatures,  BootloaderAPI_Signatures,  8)
44
45 # Default target
46 all:
47
48 # Include LUFA-specific DMBS extension modules
49 DMBS_LUFA_PATH ?= $(LUFA_PATH)/Build/LUFA
50 include $(DMBS_LUFA_PATH)/lufa-sources.mk
51 include $(DMBS_LUFA_PATH)/lufa-gcc.mk
52
53 # Include common DMBS build system modules
54 DMBS_PATH      ?= $(LUFA_PATH)/Build/DMBS/DMBS
55 include $(DMBS_PATH)/core.mk
56 include $(DMBS_PATH)/cppcheck.mk
57 include $(DMBS_PATH)/doxygen.mk
58 include $(DMBS_PATH)/dfu.mk
59 include $(DMBS_PATH)/gcc.mk
60 include $(DMBS_PATH)/hid.mk
61 include $(DMBS_PATH)/avrdude.mk
62 include $(DMBS_PATH)/atprogram.mk