keyboards/zeal60/zeal60.c

   1 /* Copyright 2017 Jason Williams (Wilba)
   2  *
   3  * This program is free software: you can redistribute it and/or modify
   4  * it under the terms of the GNU General Public License as published by
   5  * the Free Software Foundation, either version 2 of the License, or
   6  * (at your option) any later version.
   7  *
   8  * This program is distributed in the hope that it will be useful,
   9  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  10  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  11  * GNU General Public License for more details.
  12  *
  13  * You should have received a copy of the GNU General Public License
  14  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  15  */
  16 #include "zeal60.h"
  17 #include "zeal60_api.h"
  18
  19 // Check that no backlight functions are called
  20 #if RGB_BACKLIGHT_ENABLED
  21 #include "rgb_backlight.h"
  22 #endif // BACKLIGHT_ENABLED
  23
  24 #include "raw_hid.h"
  25 #include "dynamic_keymap.h"
  26 #include "timer.h"
  27 #include "tmk_core/common/eeprom.h"
  28
  29 bool eeprom_is_valid(void)
  30 {
  31         return (eeprom_read_word(((void*)EEPROM_MAGIC_ADDR)) == EEPROM_MAGIC &&
  32                         eeprom_read_byte(((void*)EEPROM_VERSION_ADDR)) == EEPROM_VERSION);
  33 }
  34
  35 void eeprom_set_valid(bool valid)
  36 {
  37         eeprom_update_word(((void*)EEPROM_MAGIC_ADDR), valid ? EEPROM_MAGIC : 0xFFFF);
  38         eeprom_update_byte(((void*)EEPROM_VERSION_ADDR), valid ? EEPROM_VERSION : 0xFF);
  39 }
  40
  41 void eeprom_reset(void)
  42 {
  43         // Set the Zeal60 specific EEPROM state as invalid.
  44         eeprom_set_valid(false);
  45         // Set the TMK/QMK EEPROM state as invalid.
  46         eeconfig_disable();
  47 }
  48
  49 #ifdef RAW_ENABLE
  50
  51 void raw_hid_receive( uint8_t *data, uint8_t length )
  52 {
  53         uint8_t *command_id = &(data[0]);
  54         uint8_t *command_data = &(data[1]);
  55         switch ( *command_id )
  56         {
  57                 case id_get_protocol_version:
  58                 {
  59                         command_data[0] = PROTOCOL_VERSION >> 8;
  60                         command_data[1] = PROTOCOL_VERSION & 0xFF;
  61                         break;
  62                 }
  63                 case id_get_keyboard_value:
  64                 {
  65                         if ( command_data[0] == id_uptime )
  66                         {
  67                                 uint32_t value = timer_read32();
  68                                 command_data[1] = (value >> 24 ) & 0xFF;
  69                                 command_data[2] = (value >> 16 ) & 0xFF;
  70                                 command_data[3] = (value >> 8 ) & 0xFF;
  71                                 command_data[4] = value & 0xFF;
  72                         }
  73                         else
  74                         {
  75                                 *command_id = id_unhandled;
  76                         }
  77                         break;
  78                 }
  79 #ifdef DYNAMIC_KEYMAP_ENABLE
  80                 case id_dynamic_keymap_get_keycode:
  81                 {
  82                         uint16_t keycode = dynamic_keymap_get_keycode( command_data[0], command_data[1], command_data[2] );
  83                         command_data[3] = keycode >> 8;
  84                         command_data[4] = keycode & 0xFF;
  85                         break;
  86                 }
  87                 case id_dynamic_keymap_set_keycode:
  88                 {
  89                         dynamic_keymap_set_keycode( command_data[0], command_data[1], command_data[2], ( command_data[3] << 8 ) | command_data[4] );
  90                         break;
  91                 }
  92                 case id_dynamic_keymap_reset:
  93                 {
  94                         dynamic_keymap_reset();
  95                         break;
  96                 }
  97                 case id_dynamic_keymap_macro_get_count:
  98                 {
  99                         command_data[0] = dynamic_keymap_macro_get_count();
 100                         break;
 101                 }
 102                 case id_dynamic_keymap_macro_get_buffer_size:
 103                 {
 104                         uint16_t size = dynamic_keymap_macro_get_buffer_size();
 105                         command_data[0] = size >> 8;
 106                         command_data[1] = size & 0xFF;
 107                         break;
 108                 }
 109                 case id_dynamic_keymap_macro_get_buffer:
 110                 {
 111                         uint16_t offset = ( command_data[0] << 8 ) | command_data[1];
 112                         uint16_t size = command_data[2]; // size <= 28
 113                         dynamic_keymap_macro_get_buffer( offset, size, &command_data[3] );
 114                         break;
 115                 }
 116                 case id_dynamic_keymap_macro_set_buffer:
 117                 {
 118                         uint16_t offset = ( command_data[0] << 8 ) | command_data[1];
 119                         uint16_t size = command_data[2]; // size <= 28
 120                         dynamic_keymap_macro_set_buffer( offset, size, &command_data[3] );
 121                         break;
 122                 }
 123                 case id_dynamic_keymap_macro_reset:
 124                 {
 125                         dynamic_keymap_macro_reset();
 126                         break;
 127                 }
 128                 case id_dynamic_keymap_get_layer_count:
 129                 {
 130                         command_data[0] = dynamic_keymap_get_layer_count();
 131                         break;
 132                 }
 133                 case id_dynamic_keymap_get_buffer:
 134                 {
 135                         uint16_t offset = ( command_data[0] << 8 ) | command_data[1];
 136                         uint16_t size = command_data[2]; // size <= 28
 137                         dynamic_keymap_get_buffer( offset, size, &command_data[3] );
 138                         break;
 139                 }
 140                 case id_dynamic_keymap_set_buffer:
 141                 {
 142                         uint16_t offset = ( command_data[0] << 8 ) | command_data[1];
 143                         uint16_t size = command_data[2]; // size <= 28
 144                         dynamic_keymap_set_buffer( offset, size, &command_data[3] );
 145                         break;
 146                 }
 147 #endif // DYNAMIC_KEYMAP_ENABLE
 148 #if RGB_BACKLIGHT_ENABLED
 149                 case id_backlight_config_set_value:
 150                 {
 151                         backlight_config_set_value(command_data);
 152                         break;
 153                 }
 154                 case id_backlight_config_get_value:
 155                 {
 156                         backlight_config_get_value(command_data);
 157                         break;
 158                 }
 159                 case id_backlight_config_save:
 160                 {
 161                         backlight_config_save();
 162                         break;
 163                 }
 164 #endif // RGB_BACKLIGHT_ENABLED
 165                 case id_eeprom_reset:
 166                 {
 167                         eeprom_reset();
 168                         break;
 169                 }
 170                 case id_bootloader_jump:
 171                 {
 172                         // Need to send data back before the jump
 173                         // Informs host that the command is handled
 174                         raw_hid_send( data, length );
 175                         // Give host time to read it
 176                         wait_ms(100);
 177                         bootloader_jump();
 178                         break;
 179                 }
 180                 default:
 181                 {
 182                         // Unhandled message.
 183                         *command_id = id_unhandled;
 184                         break;
 185                 }
 186         }
 187
 188         // Return same buffer with values changed
 189         raw_hid_send( data, length );
 190
 191 }
 192
 193 #endif
 194
 195 void main_init(void)
 196 {
 197         // If the EEPROM has the magic, the data is good.
 198         // OK to load from EEPROM.
 199         if (eeprom_is_valid()) {
 200 #if RGB_BACKLIGHT_ENABLED
 201                 backlight_config_load();
 202 #endif // RGB_BACKLIGHT_ENABLED
 203         } else  {
 204 #if RGB_BACKLIGHT_ENABLED
 205                 // If the EEPROM has not been saved before, or is out of date,
 206                 // save the default values to the EEPROM. Default values
 207                 // come from construction of the zeal_backlight_config instance.
 208                 backlight_config_save();
 209 #endif // RGB_BACKLIGHT_ENABLED
 210 #ifdef DYNAMIC_KEYMAP_ENABLE
 211                 // This resets the keymaps in EEPROM to what is in flash.
 212                 dynamic_keymap_reset();
 213                 // This resets the macros in EEPROM to nothing.
 214                 dynamic_keymap_macro_reset();
 215 #endif
 216                 // Save the magic number last, in case saving was interrupted
 217                 eeprom_set_valid(true);
 218         }
 219
 220 #if RGB_BACKLIGHT_ENABLED
 221         // Initialize LED drivers for backlight.
 222         backlight_init_drivers();
 223
 224         backlight_timer_init();
 225         backlight_timer_enable();
 226 #endif // RGB_BACKLIGHT_ENABLED
 227 }
 228
 229 void bootmagic_lite(void)
 230 {
 231         // The lite version of TMK's bootmagic.
 232         // 100% less potential for accidentally making the
 233         // keyboard do stupid things.
 234
 235         // We need multiple scans because debouncing can't be turned off.
 236         matrix_scan();
 237         wait_ms(DEBOUNCING_DELAY);
 238         wait_ms(DEBOUNCING_DELAY);
 239         matrix_scan();
 240
 241         // If the Esc (matrix 0,0) is held down on power up,
 242         // reset the EEPROM valid state and jump to bootloader.
 243         if ( matrix_get_row(0) & (1<<0) ) {
 244                 eeprom_reset();
 245                 bootloader_jump();
 246         }
 247 }
 248
 249 void matrix_init_kb(void)
 250 {
 251         bootmagic_lite();
 252         main_init();
 253         matrix_init_user();
 254 }
 255
 256 void matrix_scan_kb(void)
 257 {
 258 #if RGB_BACKLIGHT_ENABLED
 259         // This only updates the LED driver buffers if something has changed.
 260         backlight_update_pwm_buffers();
 261 #endif // BACKLIGHT_ENABLED
 262         matrix_scan_user();
 263 }
 264
 265 bool process_record_kb(uint16_t keycode, keyrecord_t *record)
 266 {
 267 #if RGB_BACKLIGHT_ENABLED
 268         process_record_backlight(keycode, record);
 269 #endif // BACKLIGHT_ENABLED
 270
 271         switch(keycode) {
 272                 case FN_MO13:
 273                         if (record->event.pressed) {
 274                                 layer_on(1);
 275                                 update_tri_layer(1, 2, 3);
 276                         } else {
 277                                 layer_off(1);
 278                                 update_tri_layer(1, 2, 3);
 279                         }
 280                         return false;
 281                         break;
 282                 case FN_MO23:
 283                         if (record->event.pressed) {
 284                                 layer_on(2);
 285                                 update_tri_layer(1, 2, 3);
 286                         } else {
 287                                 layer_off(2);
 288                                 update_tri_layer(1, 2, 3);
 289                         }
 290                         return false;
 291                         break;
 292         }
 293
 294 #ifdef DYNAMIC_KEYMAP_ENABLE
 295         // Handle macros
 296         if (record->event.pressed) {
 297                 if ( keycode >= MACRO00 && keycode <= MACRO15 )
 298                 {
 299                         uint8_t id = keycode - MACRO00;
 300                         dynamic_keymap_macro_send(id);
 301                         return false;
 302                 }
 303         }
 304 #endif //DYNAMIC_KEYMAP_ENABLE
 305
 306         return process_record_user(keycode, record);
 307 }
 308
 309 // This overrides the one in quantum/keymap_common.c
 310 uint16_t keymap_function_id_to_action( uint16_t function_id )
 311 {
 312         // Zeal60 specific "action functions" are 0xF00 to 0xFFF
 313         // i.e. F(0xF00) to F(0xFFF) are mapped to
 314         // enum zeal60_action_functions by masking last 8 bits.
 315         if ( function_id >= 0x0F00 && function_id <= 0x0FFF )
 316         {
 317                 uint8_t id = function_id & 0xFF;
 318                 switch ( id ) {
 319                         case TRIPLE_TAP_1_3:
 320                         case TRIPLE_TAP_2_3:
 321                         {
 322                                 return ACTION_FUNCTION_TAP(id);
 323                                 break;
 324                         }
 325                         default:
 326                                 break;
 327                 }
 328         }
 329
 330         return pgm_read_word(&fn_actions[function_id]);
 331 }
 332
 333
 334 // Zeal60 specific "action functions"
 335 void action_function(keyrecord_t *record, uint8_t id, uint8_t opt)
 336 {
 337         switch (id)
 338         {
 339         case TRIPLE_TAP_1_3:
 340         case TRIPLE_TAP_2_3:
 341                 if (record->event.pressed) {
 342                         layer_on( id == TRIPLE_TAP_1_3 ? 1 : 2 );
 343                         if (record->tap.count && !record->tap.interrupted) {
 344                                 if (record->tap.count >= 3) {
 345                                         layer_invert(3);
 346                                 }
 347                         } else {
 348                                 record->tap.count = 0;
 349                         }
 350                 } else {
 351                         layer_off( id == TRIPLE_TAP_1_3 ? 1 : 2 );
 352                 }
 353                 break;
 354         }
 355 }
 356
 357 void led_set_kb(uint8_t usb_led)
 358 {
 359 #if RGB_BACKLIGHT_ENABLED
 360         backlight_set_indicator_state(usb_led);
 361 #endif // RGB_BACKLIGHT_ENABLED
 362 }
 363
 364 void suspend_power_down_kb(void)
 365 {
 366 #if RGB_BACKLIGHT_ENABLED
 367         backlight_set_suspend_state(true);
 368 #endif // RGB_BACKLIGHT_ENABLED
 369 }
 370
 371 void suspend_wakeup_init_kb(void)
 372 {
 373 #if RGB_BACKLIGHT_ENABLED
 374         backlight_set_suspend_state(false);
 375 #endif // RGB_BACKLIGHT_ENABLED
 376 }
 377