]> git.donarmstrong.com Git - qmk_firmware.git/blob - keyboards/clueboard_60/config.h
Address #1689 by using a formula to define the breathing curve (#1692)
[qmk_firmware.git] / keyboards / clueboard_60 / config.h
1 /*
2  * Copyright 2017 skully <skullydazed@gmail.com>
3  *
4  * This program is free software: you can redistribute it and/or modify
5  * it under the terms of the GNU General Public License as published by
6  * the Free Software Foundation, either version 2 of the License, or
7  * (at your option) any later version.
8  *
9  * This program is distributed in the hope that it will be useful,
10  * but WITHOUT ANY WARRANTY; without even the implied warranty of
11  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
12  * GNU General Public License for more details.
13  *
14  * You should have received a copy of the GNU General Public License
15  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
16  */
17
18 #ifndef CONFIG_H
19 #define CONFIG_H
20
21 /* USB Device descriptor parameter */
22 #define VENDOR_ID       0xC1ED
23 #define PRODUCT_ID      0x2350
24 #define DEVICE_VER      0x0001
25 #define MANUFACTURER    "Clueboard"
26 #define USBSTR_MANUFACTURER 'C', '\x00', 'l', '\x00', 'u', '\x00', 'e', '\x00', 'b', '\x00', 'o', '\x00', 'a', '\x00', 'r', '\x00', 'd', '\x00'
27 #define PRODUCT         "Clueboard60"
28 #define USBSTR_PRODUCT 'C', '\x00', 'l', '\x00', 'u', '\x00', 'e', '\x00', 'b', '\x00', 'o', '\x00', 'a', '\x00', 'r', '\x00', 'd', '\x00', ' ', '\x00', '6', '\x00', '0', '\x00', '%', '\x00'
29 #define DESCRIPTION     "Clueboard 60%"
30
31 /* key matrix size */
32 #define MATRIX_ROWS 5
33 #define MATRIX_COLS 15
34
35 /*
36  * Keyboard Matrix Assignments
37  *
38  * Change this to how you wired your keyboard
39  * COLS: AVR pins used for columns, left to right
40  * ROWS: AVR pins used for rows, top to bottom
41  * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
42  *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
43  *
44 */
45 /* Note: These are not used for arm boards. They're here purely as documentation.
46  * #define MATRIX_ROW_PINS { PB0, PB1, PB2, PA15, PA10 }
47  * #define MATRIX_COL_PINS { PA2, PA3, PA6, PB14, PB15, PA8, PA9, PA7, PB3, PB4, PC14, PC15, PC13, PB5, PB6 }
48  * #define UNUSED_PINS
49  */
50
51 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
52 #define DEBOUNCE 6
53
54 /* Prevent modifiers from being stuck on after layer changes. */
55 #define PREVENT_STUCK_MODIFIERS
56
57 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
58 //#define LOCKING_SUPPORT_ENABLE
59 /* Locking resynchronize hack */
60 //#define LOCKING_RESYNC_ENABLE
61
62 /*
63  * Force NKRO
64  *
65  * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
66  * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
67  * makefile for this to work.)
68  *
69  * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
70  * until the next keyboard reset.
71  *
72  * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
73  * fully operational during normal computer usage.
74  *
75  * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
76  * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
77  * bootmagic, NKRO mode will always be enabled until it is toggled again during a
78  * power-up.
79  *
80  */
81 //#define FORCE_NKRO
82
83 /* key combination for magic key command */
84 #define IS_COMMAND() ( \
85         keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
86 )
87
88 /*
89  * Feature disable options
90  *  These options are also useful to firmware size reduction.
91  */
92
93 /* disable debug print */
94 //#define NO_DEBUG
95
96 /* disable print */
97 //#define NO_PRINT
98
99 /* disable action features */
100 //#define NO_ACTION_LAYER
101 //#define NO_ACTION_TAPPING
102 //#define NO_ACTION_ONESHOT
103 //#define NO_ACTION_MACRO
104 //#define NO_ACTION_FUNCTION
105
106 /*
107  * MIDI options
108  */
109
110 /* Prevent use of disabled MIDI features in the keymap */
111 //#define MIDI_ENABLE_STRICT 1
112
113 /* enable basic MIDI features:
114    - MIDI notes can be sent when in Music mode is on
115 */
116 //#define MIDI_BASIC
117
118 /* enable advanced MIDI features:
119    - MIDI notes can be added to the keymap
120    - Octave shift and transpose
121    - Virtual sustain, portamento, and modulation wheel
122    - etc.
123 */
124 //#define MIDI_ADVANCED
125
126 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
127 //#define MIDI_TONE_KEYCODE_OCTAVES 1
128
129 #endif
130
131  /* Backlight configuration
132  */
133 #define BACKLIGHT_LEVELS 1