]> git.donarmstrong.com Git - qmk_firmware.git/blob - README.md
Update for Atomic PCB Rev 0
[qmk_firmware.git] / README.md
1 TMK Keyboard Firmware Collection
2 ================================
3 This is a keyboard firmware with some useful features for Atmel AVR controller.
4
5 Source code is available here: <http://github.com/tmk/tmk_keyboard>
6
7
8 Features
9 --------
10 These features can be used in your keyboard.
11
12 * Multi-layer Keymap  - Multiple keyboard layouts with layer switching
13 * Mouse key           - Mouse control with keyboard
14 * System Control Key  - Power Down, Sleep, Wake Up and USB Remote Wake up
15 * Media Control Key   - Volume Down/Up, Mute, Next/Prev track, Play, Stop and etc
16 * USB NKRO            - 120 keys(+ 8 modifiers) simultaneously
17 * PS/2 mouse support  - PS/2 mouse(TrackPoint) as composite device
18 * Keyboard protocols  - PS/2, ADB, M0110, Sun and other old keyboard protocols
19 * User Function       - Customizable function of key with writing code
20 * Macro               - Very primitive at this time
21 * Keyboard Tricks     - Oneshot modifier and modifier with tapping feature
22 * Debug Console       - Messages for debug and interaction with firmware
23 * Virtual DIP Switch  - Configurations stored EEPROM(Boot Magic)
24 * Locking CapsLock    - Mechanical switch support for CapsLock
25 * Breathing Sleep LED - Sleep indicator with charm during USB suspend
26 * Backlight           - Control backlight levels
27
28
29 Projects
30 --------
31 You can find some keyboard specific projects under `converter` and `keyboard` directory.
32
33 ### converter
34 * [ps2_usb](converter/ps2_usb/)             - [PS/2 keyboard to USB][GH_ps2]
35 * [adb_usb](converter/adb_usb/)             - [ADB keyboard to USB][GH_adb]
36 * [m0110_usb](converter/m0110_usb)          - [Macintosh 128K/512K/Plus keyboard to USB][GH_m0110]
37 * [terminal_usb](converter/terminal_usb/)   - [IBM Model M terminal keyboard(PS/2 scancode set3) to USB][GH_terminal]
38 * [news_usb](converter/news_usb/)           - [Sony NEWS keyboard to USB][GH_news]
39 * [x68k_usb](converter/x68k_usb/)           - [Sharp X68000 keyboard to USB][GH_x68k]
40 * [sun_usb](converter/sun_usb/)             - [Sun] to USB(type4, 5 and 3?)
41 * [pc98_usb](converter/pc98_usb/)           - [PC98] to USB
42 * [usb_usb](converter/usb_usb/)             - USB to USB(experimental)
43 * [ascii_usb](converter/ascii_usb/)         - ASCII(Serial console terminal) to USB
44 * [ibm4704_usb](converter/ibm4704_usb)      - [IBM 4704 keyboard Converter][GH_ibm4704]
45
46 ### keyboard
47 * [hhkb](keyboard/hhkb/)                    - [Happy Hacking Keyboard pro][GH_hhkb] **my main board**
48 * [gh60](keyboard/gh60/)                    - [GH60] DIY 60% keyboard [prototype][GH60_proto] **my second board**
49 * [hbkb](keyboard/hbkb/)                    - [Happy Buckling spring keyboard][GH_hbkb](IBM Model M 60% mod)
50 * [hid_liber](keyboard/hid_liber/)          - [HID liberation][HID_liber] controller (by alaricljs)
51 * [phantom](keyboard/phantom/)              - [Phantom] keyboard (by Tranquilite)
52 * [IIgs_Standard](keyboard/IIgs/)           - Apple [IIGS] keyboard mod(by JeffreySung)
53 * [macway](keyboard/macway/)                - [Compact keyboard mod][GH_macway] [retired]
54 * [KMAC](keyboard/kmac/)                    - Korean custom keyboard
55 * [Lightsaber](keyboard/lightsaber/)        - Korean custom keyboard
56 * [Infinity](keyboard/infinity/)            - Massdrop [Infinity keyboard][Infinity]
57 * [NerD](keyboard/nerd/)                    - Korean custom keyboard
58 * [KittenPaw](keyboard/kitten_paw)          - Custom Majestouch controller
59 * [Lightpad](keyboard/lightpad)             - Korean custom keypad
60 * [ghost_squid](keyboard/ghost_squid/)      - [The Ghost Squid][ghost_squid] controller for [Cooler Master QuickFire XT][cmxt]
61 * [planck](keyboard/planck/)                - [Planck] Ortholinear 40% keyboard
62 * [atomic](keyboard/atomic/)                - [Atomic] Ortholinear 60% keyboard
63
64 ### Extenal projects using tmk_keyboard
65 * [ErgoDox_cub-uanic][cub-uanic]            - Split Ergonomic Keyboard [ErgoDox][ergodox_org]
66 * [mcdox][mcdox_tmk]                        - [mcdox][mcdox]
67
68
69 [GH_macway]:    http://geekhack.org/showwiki.php?title=Island:11930
70 [GH_hhkb]:      http://geekhack.org/showwiki.php?title=Island:12047
71 [GH_ps2]:       http://geekhack.org/showwiki.php?title=Island:14618
72 [GH_adb]:       http://geekhack.org/showwiki.php?title=Island:14290
73 [GH_hhkb_bt]:   http://geekhack.org/showwiki.php?title=Island:20851
74 [GH_m0110]:     http://geekhack.org/showwiki.php?title=Island:24965
75 [GH_news]:      http://geekhack.org/showwiki.php?title=Island:25759
76 [GH_terminal]:  http://geekhack.org/showwiki.php?title=Island:27272
77 [GH_x68k]:      http://geekhack.org/showwiki.php?title=Island:29060
78 [GH_hbkb]:      http://geekhack.org/showwiki.php?title=Island:29483
79 [GH_ibm4704]:   http://geekhack.org/index.php?topic=54706.0
80 [HID_liber]:    http://deskthority.net/wiki/HID_Liberation_Device_-_DIY_Instructions
81 [Phantom]:      http://geekhack.org/index.php?topic=26742
82 [GH60]:         http://geekhack.org/index.php?topic=34959
83 [GH60_proto]:   http://geekhack.org/index.php?topic=37570.0
84 [PC98]:         http://en.wikipedia.org/wiki/NEC_PC-9801
85 [Sun]:          http://en.wikipedia.org/wiki/Sun-3
86 [IIGS]:         http://en.wikipedia.org/wiki/Apple_IIGS
87 [Infinity]:     https://www.massdrop.com/buy/infinity-keyboard-kit
88 [ghost_squid]:  http://deskthority.net/wiki/Costar_replacement_controllers#The_Ghost_Squid
89 [cmxt]:         http://gaming.coolermaster.com/en/products/keyboards/quickfirext/
90 [ergodox_org]:  http://ergodox.org/
91 [cub-uanic]:    https://github.com/cub-uanic/tmk_keyboard/tree/master/keyboard/ergodox
92 [mcdox]:        https://github.com/DavidMcEwan/mcdox
93 [mcdox_tmk]:    https://github.com/DavidMcEwan/tmk_keyboard/tree/master/keyboard/mcdox
94 [Planck]:       http://planckkeyboard.com
95 [Atomic]:       http://atomickeyboard.com
96
97
98 License
99 -------
100 **GPLv2** or later. Some protocol files are under **Modified BSD License**.
101 LUFA, PJRC and V-USB stack have their own license respectively.
102
103
104
105 Build Firmware and Program Controller
106 -------------------------------------
107 See [doc/build.md](doc/build.md).
108
109
110
111 Change your keymap
112 ------------------
113 See [doc/keymap.md](doc/keymap.md).
114
115
116
117 Magic Commands
118 --------------
119 To see help press `Magic` + `H`.
120
121  `Magic` key bind may be `LShift` + `RShift` in many project, but `Power` key on ADB converter. `Magic` keybind can be vary on each project, check `config.h` in project directory.
122
123 Following commands can be also executed with `Magic` + key. In console mode `Magic` keybind is not needed.
124
125     ----- Command Help -----
126     c:      enter console mode
127     d:      toggle debug enable
128     x:      toggle matrix debug
129     k:      toggle keyboard debug
130     m:      toggle mouse debug
131     v:      print device version & info
132     t:      print timer count
133     s:      print status
134     e:      print eeprom config
135     n:      toggle NKRO
136     0/F10:  switch to Layer0
137     1/F1:   switch to Layer1
138     2/F2:   switch to Layer2
139     3/F3:   switch to Layer3
140     4/F4:   switch to Layer4
141     PScr:   power down/remote wake-up
142     Caps:   Lock Keyboard(Child Proof)
143     Paus:   jump to bootloader
144
145 **TBD**
146
147 ### Boot Magic Configuration - Virtual DIP Switch
148 Boot Magic are executed during boot up time. Press Magic key below then plug in keyboard cable.
149 Note that you must use keys of **Layer 0** as Magic keys. These settings are stored in EEPROM so that retain your configure over power cycles.
150
151 To avoid configuring accidentally additive salt key `KC_SPACE` also needs to be pressed along with the following configuration keys. The salt key is configurable in `config.h`. See [common/bootmagic.h](common/bootmagic.h).
152
153 #### General
154 - Skip reading EEPROM to start with default configuration(`ESC`)
155 - Clear configuration stored in EEPROM to reset configuration(`Backspace`)
156
157 #### Bootloader
158 - Kick up Bootloader(`B`)
159
160 #### Debug
161 - Debug enable(`D`)
162 - Debug matrix enable(`D`+`X`)
163 - Debug keyboard enable(`D`+`K`)
164 - Debug mouse enable(`D`+`M`)
165
166 #### Keymap
167 - Swap Control and CapsLock(`Left Control`)
168 - Change CapsLock to Control(`Caps Lock`)
169 - Swap LeftAlt and Gui(`Left Alt`)
170 - Swap RightAlt and Gui(`Right Alt`)
171 - Disable Gui(`Left Gui`)
172 - Swap Grave and Escape(`Grave`)
173 - Swap BackSlash and BackSpace(`Back Slash`)
174 - Enable NKRO on boot(`N`)
175
176 #### Default Layer
177 - Set Default Layer to 0(`0`)
178 - Set Default Layer to 1(`1`)
179 - Set Default Layer to 2(`2`)
180 - Set Default Layer to 3(`3`)
181 - Set Default Layer to 4(`4`)
182 - Set Default Layer to 5(`5`)
183 - Set Default Layer to 6(`6`)
184 - Set Default Layer to 7(`7`)
185
186 #### Caution
187 Unintentional use of this feature will cause user confusion.
188
189 TODO: Magic key combination to avoid unintentional press during plug in
190
191 **TBD**
192
193
194 Mechanical Locking support
195 --------------------------
196 This feature makes it possible for you to use mechanical switch for `CapsLock`, `NumLock` or `ScrollLock`. To enable this feature define these macros in `config.h` and use `KC_LCAP`, `KC_LNUM` or `KC_LSCR` in keymap for locking key instead of normal `KC_CAPS`, `KC_NLCK` or `KC_SLCK`. Resync option tries to keep lock switch state consistent with keyboard LED state.
197  
198     #define LOCKING_SUPPORT_ENABLE
199     #define LOCKING_RESYNC_ENABLE
200
201
202 Start Your Own Project
203 -----------------------
204 **TBD**
205 ### Config.h Options
206 #### 1. USB vendor/product ID and device description
207     #define VENDOR_ID       0xFEED
208     #define PRODUCT_ID      0xBEEF
209     #define MANUFACTURER    t.m.k.
210     #define PRODUCT         Macway mod
211     #define DESCRIPTION     t.m.k. keyboard firmware for Macway mod
212
213 #### 2. Keyboard matrix configuration
214     #define MATRIX_ROWS 8
215     #define MATRIX_COLS 8
216     #define MATRIX_HAS_GHOST
217
218
219
220 Architecture
221 ------------
222     Architecture Diagram
223                                +---------------+---------------+-------------+
224                                |    Host       |   Keyboard    | Matrix, LED |
225        ___________             |-----------+-+ +-------------+ | +-----------|
226       /          /| Keys/Mouse | Protocol  |d| | Action      | | | Protocol  |
227      /__________/ |<-----------|  LUFA     |r| |  Layer, Tap | | |  Matrix   |
228      |.--------.| |   LED      |  V-USB    |i| |-------------| | |  PS/2,IBM |             __________________
229      ||        || |----------->|  PJRC     |v| | Keymap      | | |  ADB,M0110|  Keys      / /_/_/_/_/_/_/_/ /|
230      ||  Host  || |  Console   |  iWRAP(BT)|e| | Mousekey    | | |  SUN/NEWS |<----------/ /_/_/_/_/_/_/_/ / /
231      ||________||/.<-----------|  UART     |r| | Report      | | |  X68K/PC98| Control  / /_/_/_/_/_/_/_/ / /
232      `_========_'/|            |---------------------------------------------|-------->/___ /_______/ ___/ /
233      |_o______o_|/             | Sendchar, Print, Debug, Command, ...        |         |_________________|/
234                                +---------------------------------------------+              Keyboard
235
236
237
238 Debugging
239 --------
240 Use PJRC's `hid_listen` to see debug messages. You can use the tool for debug even if firmware use LUFA stack.
241
242 You can use xprintf() to display debug info on `hid_listen`, see `common/xprintf.h`.
243
244
245
246 Files and Directories
247 -------------------
248 ### Top
249 * common/       - common codes
250 * protocol/     - keyboard protocol support
251 * keyboard/     - keyboard projects
252 * converter/    - protocol converter projects
253 * doc/          - documents
254 * common.mk     - Makefile for common
255 * protocol.mk    - Makefile for protocol
256 * rules.mk      - Makefile for build rules
257
258 ### Common
259 * host.h
260 * host_driver.h
261 * keyboard.h
262 * command.h
263 * keymap.h
264 * action.h
265 * keycode.h
266 * matrix.h
267 * led.h
268 * mousekey.h
269 * report.h
270 * debug.h
271 * print.h
272 * bootloader.h
273 * sendchar.h
274 * timer.h
275 * util.h
276
277 ### Keyboard Protocols
278 * lufa/     - LUFA USB stack
279 * pjrc/     - PJRC USB stack
280 * vusb/     - Objective Development V-USB
281 * iwrap/    - Bluetooth HID for Bluegiga iWRAP
282 * ps2.c     - PS/2 protocol
283 * adb.c     - Apple Desktop Bus protocol
284 * m0110.c   - Macintosh 128K/512K/Plus keyboard protocol
285 * news.c    - Sony NEWS keyboard protocol
286 * x68k.c    - Sharp X68000 keyboard protocol
287 * serial_soft.c - Asynchronous Serial protocol implemented by software
288
289
290
291 Coding Style
292 -------------
293 - Doesn't use Tab to indent, use 4-spaces instead.
294
295
296
297 Other Keyboard Firmware Projects
298 ------------------
299 You can learn a lot about keyboard firmware from these. See [doc/other_projects.md](doc/other_projects.md).