changing-time-signatures-inside-a-polymetric-section-using--scaledurations.ly
chant-or-psalms-notation.ly
creating-blank-staves.ly
+creating-custom-key-signatures.ly
cross-staff-stems.ly
defining-an-engraver-in-scheme--ambitus-engraver.ly
displaying-a-whole-grandstaff-system-if-only-one-of-its-staves-is-alive.ly
--- /dev/null
+% DO NOT EDIT this file manually; it is automatically
+% generated from Documentation/snippets/new
+% Make any changes in Documentation/snippets/new/
+% and then run scripts/auxiliar/makelsr.py
+%
+% This file is in the public domain.
+%% Note: this file works from version 2.18.0
+\version "2.18.0"
+
+\header {
+ lsrtags = "tweaks-and-overrides, pitches, staff-notation, contexts-and-engravers"
+
+ texidoc = "
+LilyPond supports custom key signatures. In this example, print for D
+minor with an extended range of printed flats.
+"
+ doctitle = "Creating custom key signatures"
+} % begin verbatim
+
+
+\new Staff \with {
+ \override StaffSymbol.line-count = #8
+ \override KeySignature.flat-positions = #'((-7 . 6))
+ \override KeyCancellation.flat-positions = #'((-7 . 6))
+ % presumably sharps are also printed in both octaves
+ \override KeySignature.sharp-positions = #'((-6 . 7))
+ \override KeyCancellation.sharp-positions = #'((-6 . 7))
+
+ \override Clef.stencil = #
+ (lambda (grob)(grob-interpret-markup grob
+ #{ \markup\combine
+ \musicglyph #"clefs.C"
+ \translate #'(-3 . -2)
+ \musicglyph #"clefs.F"
+ #}))
+ clefPosition = #3
+ middleCPosition = #3
+ middleCClefPosition = #3
+}
+
+{
+ \key d\minor
+ f bes, f bes,
+}
--- /dev/null
+% DO NOT EDIT this file manually; it is automatically
+% generated from Documentation/snippets/new
+% Make any changes in Documentation/snippets/new/
+% and then run scripts/auxiliar/makelsr.py
+%
+% This file is in the public domain.
+%% Note: this file works from version 2.18.0
+\version "2.18.0"
+
+\header {
+ lsrtags = "tweaks-and-overrides, pitches, staff-notation"
+
+ texidoc = "
+It is possible to change the slope of the Ottava spanner.
+
+"
+ doctitle = "Modifying the Ottava spanner slope"
+} % begin verbatim
+
+
+\relative c'' {
+ \override Staff.OttavaBracket.stencil = #ly:line-spanner::print
+ \override Staff.OttavaBracket.bound-details =
+ #`((left . ((Y . 0) ; Change the integer here
+ (attach-dir . ,LEFT)
+ (padding . 0)
+ (stencil-align-dir-y . ,CENTER)))
+ (right . ((Y . 5) ; Change the integer here
+ (padding . 0)
+ (attach-dir . ,RIGHT)
+ (text . ,(make-draw-dashed-line-markup (cons 0 -1.2))))))
+ \override Staff.OttavaBracket.left-bound-info =
+ #ly:line-spanner::calc-left-bound-info-and-text
+ \override Staff.OttavaBracket.right-bound-info =
+ #ly:line-spanner::calc-right-bound-info
+ \ottava #1
+ c1
+ c'''1
+}
clefs-can-be-transposed-by-arbitrary-amounts.ly
coloring-notes-depending-on-their-pitch.ly
creating-a-sequence-of-notes-on-various-pitches.ly
-forcing-a-clef-symbol-to-be-displayed.ly
+creating-custom-key-signatures.ly
generating-random-notes.ly
hiding-accidentals-on-tied-notes-at-the-start-of-a-new-system.ly
-keep-change-clefs-full-sized.ly
makam-example.ly
+modifying-the-ottava-spanner-slope.ly
non-traditional-key-signatures.ly
numbers-as-easy-note-heads.ly
orchestra,-choir-and-piano-template.ly
changing-the-number-of-lines-in-a-staff.ly
changing-the-staff-size.ly
creating-blank-staves.ly
+creating-custom-key-signatures.ly
creating-double-digit-fingerings.ly
cross-staff-stems.ly
display-bracket-with-only-one-staff-in-a-system.ly
making-some-staff-lines-thicker-than-the-others.ly
measure-counter.ly
mensurstriche-layout-bar-lines-between-the-staves.ly
+modifying-the-ottava-spanner-slope.ly
nesting-staves.ly
non-traditional-key-signatures.ly
numbering-groups-of-measures.ly
-%% DO NOT EDIT this file manually; it is automatically
-%% generated from LSR http://lsr.di.unimi.it
-%% Make any changes in LSR itself, or in Documentation/snippets/new/ ,
-%% and then run scripts/auxiliar/makelsr.py
-%%
-%% This file is in the public domain.
-\version "2.18.0"
+% DO NOT EDIT this file manually; it is automatically
+% generated from Documentation/snippets/new
+% Make any changes in Documentation/snippets/new/
+% and then run scripts/auxiliar/makelsr.py
+%
+% This file is in the public domain.
+%% Note: this file works from version 2.19.14
+\version "2.19.14"
\header {
lsrtags = "simultaneous-notes, tweaks-and-overrides"
texidoc = "
If notes from two voices with stems in the same direction are placed at
-the same position, and both voices have no shift or the same shift
+the same position, but the voices have no voice-specific shifts
specified, the error message @samp{warning: ignoring too many clashing
note columns} will appear when compiling the LilyPond file. This
message can be suppressed by setting the @code{'ignore-collision}
this does not just suppress warnings but stops LilyPond trying to
resolve collisions at all and so may have unintended results unless
used with care.
-
"
doctitle = "Suppressing warnings for clashing note columns"
} % begin verbatim
+
ignore = \override NoteColumn.ignore-collision = ##t
\relative c' {
- <<
- \ignore
- { \stemDown f2 g }
- \\
- { c2 c, }
+ \new Staff <<
+ \new Voice{ \ignore \stemDown f2 g }
+ \new Voice{ c2 \stemDown c, }
>>
}
-%% DO NOT EDIT this file manually; it is automatically
-%% generated from LSR http://lsr.di.unimi.it
-%% Make any changes in LSR itself, or in Documentation/snippets/new/ ,
-%% and then run scripts/auxiliar/makelsr.py
-%%
-%% This file is in the public domain.
-\version "2.18.0"
+% DO NOT EDIT this file manually; it is automatically
+% generated from Documentation/snippets/new
+% Make any changes in Documentation/snippets/new/
+% and then run scripts/auxiliar/makelsr.py
+%
+% This file is in the public domain.
+%% Note: this file works from version 2.17.18
+\version "2.17.18"
\header {
lsrtags = "pitches, staff-notation, tweaks-and-overrides"
texidoc = "
-The command @code{\\clef \"treble_8\"} is equivalent to setting
-@code{clefGlyph}, @code{clefPosition} (which controls the vertical
-position of the clef), @code{middleCPosition} and
-@code{clefOctavation}. A clef is printed when any of the properties
-except @code{middleCPosition} are changed.
+Changing the Clef glyph, its position, or the ottavation does not
+change the position of subsequent notes on the staff. To get key
+signatures on their correct staff lines @code{middleCClefPosition}
+must also be specified, with positive or negative values moving
+@emph{middle C} up or down respectively, relative to the staff's
+center line.
-
-Note that changing the glyph, the position of the clef, or the
-octavation does not in itself change the position of subsequent notes
-on the staff: the position of middle C must also be specified to do
-this. In order to get key signatures on the correct staff lines,
-@code{middleCClefPosition} must also be set. The positional parameters
-are relative to the staff center line, positive numbers displacing
-upwards, counting one for each line and space. The
-@code{clefOctavation} value would normally be set to 7, -7, 15 or -15,
-but other values are valid.
-
-
-When a clef change takes place at a line break the new clef symbol is
-printed at both the end of the previous line and the beginning of the
-new line by default. If the warning clef at the end of the previous
-line is not required it can be suppressed by setting the @code{Staff}
-property @code{explicitClefVisibility} to the value
-@code{end-of-line-invisible}. The default behavior can be recovered
-with @code{\\unset Staff.explicitClefVisibility}.
+For example, @code{\\clef \"treble_8\"} is equivalent to setting
+the @code{clefGlyph}, @code{clefPosition} (the vertical position
+of the clef itself on the staff), @code{middleCPosition} and
+@code{clefTransposition}. Note that when any of these properties
+(except @code{middleCPosition}) are changed a new clef symbol is
+printed.
The following examples show the possibilities when setting these
properties manually. On the first line, the manual changes preserve the
doctitle = "Tweaking clef properties"
} % begin verbatim
-\layout {
- indent = 0
- ragged-right = ##t
-}
+\layout { ragged-right = ##t } % begin verbatim
+
{
% The default treble clef
\key f \major
controlling-the-vertical-ordering-of-scripts.ly
controlling-tuplet-bracket-visibility.ly
creating-a-delayed-turn.ly
+creating-custom-key-signatures.ly
creating-double-digit-fingerings.ly
creating-simultaneous-rehearsal-marks.ly
creating-text-spanners.ly
how-to-print-two-rehearsal-marks-above-and-below-the-same-barline-method-1.ly
how-to-print-two-rehearsal-marks-above-and-below-the-same-barline-method-2.ly
inserting-a-caesura.ly
-keep-change-clefs-full-sized.ly
line-arrows.ly
making-an-object-invisible-with-the-transparent-property.ly
making-glissandi-breakable.ly
manually-controlling-beam-positions.ly
mensurstriche-layout-bar-lines-between-the-staves.ly
+modifying-the-ottava-spanner-slope.ly
moving-dotted-notes-in-polyphony.ly
moving-slur-positions-vertically.ly
nesting-staves.ly
projects / lilypond.git / commitdiff