Makelsr.py run

For commit ID a1c9c3d285a2f3e59cf79a375b67cfb58ceca7ba

diff --git a/Documentation/snippets/contexts-and-engravers.snippet-list b/Documentation/snippets/contexts-and-engravers.snippet-list
index c752cf87ed315ac271086897608fc463529629ba..66b3139c7ad3d84be2171b875ddb83b6756d1573 100644 (file)
--- a/Documentation/snippets/contexts-and-engravers.snippet-list
+++ b/Documentation/snippets/contexts-and-engravers.snippet-list
@@ -8,6 +8,7 @@ changing-midi-output-to-one-channel-per-voice.ly
 changing-time-signatures-inside-a-polymetric-section-using--scaledurations.ly
 chant-or-psalms-notation.ly
 creating-blank-staves.ly
 changing-time-signatures-inside-a-polymetric-section-using--scaledurations.ly
 chant-or-psalms-notation.ly
 creating-blank-staves.ly

+creating-custom-key-signatures.ly

 cross-staff-stems.ly
 defining-an-engraver-in-scheme--ambitus-engraver.ly
 displaying-a-whole-grandstaff-system-if-only-one-of-its-staves-is-alive.ly
 cross-staff-stems.ly
 defining-an-engraver-in-scheme--ambitus-engraver.ly
 displaying-a-whole-grandstaff-system-if-only-one-of-its-staves-is-alive.ly

diff --git a/Documentation/snippets/creating-custom-key-signatures.ly b/Documentation/snippets/creating-custom-key-signatures.ly
new file mode 100644 (file)
index 0000000..78de0a0
--- /dev/null
+++ b/Documentation/snippets/creating-custom-key-signatures.ly
@@ -0,0 +1,44 @@
+% DO NOT EDIT this file manually; it is automatically
+% generated from Documentation/snippets/new
+% Make any changes in Documentation/snippets/new/
+% and then run scripts/auxiliar/makelsr.py
+%
+% This file is in the public domain.
+%% Note: this file works from version 2.18.0
+\version "2.18.0"
+
+\header {
+  lsrtags = "tweaks-and-overrides, pitches, staff-notation, contexts-and-engravers"
+
+  texidoc = "
+LilyPond supports custom key signatures.  In this example, print for D
+minor with an extended range of printed flats.
+"
+  doctitle = "Creating custom key signatures"
+} % begin verbatim
+
+
+\new Staff \with {
+  \override StaffSymbol.line-count = #8
+  \override KeySignature.flat-positions = #'((-7 . 6))
+  \override KeyCancellation.flat-positions = #'((-7 . 6))
+  % presumably sharps are also printed in both octaves
+  \override KeySignature.sharp-positions = #'((-6 . 7))
+  \override KeyCancellation.sharp-positions = #'((-6 . 7))
+
+  \override Clef.stencil = #
+  (lambda (grob)(grob-interpret-markup grob
+  #{ \markup\combine
+    \musicglyph #"clefs.C"
+    \translate #'(-3 . -2)
+    \musicglyph #"clefs.F"
+   #}))
+    clefPosition = #3
+    middleCPosition = #3
+    middleCClefPosition = #3
+}
+
+{
+  \key d\minor
+  f bes, f bes,
+}

diff --git a/Documentation/snippets/modifying-the-ottava-spanner-slope.ly b/Documentation/snippets/modifying-the-ottava-spanner-slope.ly
new file mode 100644 (file)
index 0000000..dea97c4
--- /dev/null
+++ b/Documentation/snippets/modifying-the-ottava-spanner-slope.ly
@@ -0,0 +1,39 @@
+% DO NOT EDIT this file manually; it is automatically
+% generated from Documentation/snippets/new
+% Make any changes in Documentation/snippets/new/
+% and then run scripts/auxiliar/makelsr.py
+%
+% This file is in the public domain.
+%% Note: this file works from version 2.18.0
+\version "2.18.0"
+
+\header {
+  lsrtags = "tweaks-and-overrides, pitches, staff-notation"
+
+  texidoc = "
+It is possible to change the slope of the Ottava spanner.
+
+"
+  doctitle = "Modifying the Ottava spanner slope"
+} % begin verbatim
+
+
+\relative c'' {
+  \override Staff.OttavaBracket.stencil = #ly:line-spanner::print
+  \override Staff.OttavaBracket.bound-details =
+    #`((left . ((Y . 0) ; Change the integer here
+                (attach-dir . ,LEFT)
+                (padding . 0)
+                (stencil-align-dir-y . ,CENTER)))
+       (right . ((Y . 5) ; Change the integer here
+                 (padding . 0)
+                 (attach-dir . ,RIGHT)
+                 (text . ,(make-draw-dashed-line-markup (cons 0 -1.2))))))
+  \override Staff.OttavaBracket.left-bound-info =
+     #ly:line-spanner::calc-left-bound-info-and-text
+  \override Staff.OttavaBracket.right-bound-info =
+     #ly:line-spanner::calc-right-bound-info
+  \ottava #1
+  c1
+  c'''1
+}

diff --git a/Documentation/snippets/pitches.snippet-list b/Documentation/snippets/pitches.snippet-list
index 87368cd7cf68dd0417a20704165e84d1b6e2d336..15750e435dbfe017c23c504b542ab61ac7acdfe3 100644 (file)
--- a/Documentation/snippets/pitches.snippet-list
+++ b/Documentation/snippets/pitches.snippet-list
@@ -10,11 +10,11 @@ changing-the-interval-of-lines-on-the-stave.ly
 clefs-can-be-transposed-by-arbitrary-amounts.ly
 coloring-notes-depending-on-their-pitch.ly
 creating-a-sequence-of-notes-on-various-pitches.ly
 clefs-can-be-transposed-by-arbitrary-amounts.ly
 coloring-notes-depending-on-their-pitch.ly
 creating-a-sequence-of-notes-on-various-pitches.ly

-forcing-a-clef-symbol-to-be-displayed.ly
+creating-custom-key-signatures.ly

 generating-random-notes.ly
 hiding-accidentals-on-tied-notes-at-the-start-of-a-new-system.ly
 generating-random-notes.ly
 hiding-accidentals-on-tied-notes-at-the-start-of-a-new-system.ly

-keep-change-clefs-full-sized.ly

 makam-example.ly
 makam-example.ly

+modifying-the-ottava-spanner-slope.ly

 non-traditional-key-signatures.ly
 numbers-as-easy-note-heads.ly
 orchestra,-choir-and-piano-template.ly
 non-traditional-key-signatures.ly
 numbers-as-easy-note-heads.ly
 orchestra,-choir-and-piano-template.ly

diff --git a/Documentation/snippets/staff-notation.snippet-list b/Documentation/snippets/staff-notation.snippet-list
index 40af5a2ff7dd2d6821833566e96a41fd103aadba..be45c43b677edf752b205f97c3be32381a399526 100644 (file)
--- a/Documentation/snippets/staff-notation.snippet-list
+++ b/Documentation/snippets/staff-notation.snippet-list
@@ -9,6 +9,7 @@ centered-measure-numbers.ly
 changing-the-number-of-lines-in-a-staff.ly
 changing-the-staff-size.ly
 creating-blank-staves.ly
 changing-the-number-of-lines-in-a-staff.ly
 changing-the-staff-size.ly
 creating-blank-staves.ly

+creating-custom-key-signatures.ly

 creating-double-digit-fingerings.ly
 cross-staff-stems.ly
 display-bracket-with-only-one-staff-in-a-system.ly
 creating-double-digit-fingerings.ly
 cross-staff-stems.ly
 display-bracket-with-only-one-staff-in-a-system.ly


@@ -25,6 +26,7 @@ making-glissandi-breakable.ly
 making-some-staff-lines-thicker-than-the-others.ly
 measure-counter.ly
 mensurstriche-layout-bar-lines-between-the-staves.ly
 making-some-staff-lines-thicker-than-the-others.ly
 measure-counter.ly
 mensurstriche-layout-bar-lines-between-the-staves.ly

+modifying-the-ottava-spanner-slope.ly

 nesting-staves.ly
 non-traditional-key-signatures.ly
 numbering-groups-of-measures.ly
 nesting-staves.ly
 non-traditional-key-signatures.ly
 numbering-groups-of-measures.ly

diff --git a/Documentation/snippets/suppressing-warnings-for-clashing-note-columns.ly b/Documentation/snippets/suppressing-warnings-for-clashing-note-columns.ly
index 726b2978d3be7bd57c6948c9d035b152036b45f4..ec7f763945d507c507ebbad29f264f1310180267 100644 (file)
--- a/Documentation/snippets/suppressing-warnings-for-clashing-note-columns.ly
+++ b/Documentation/snippets/suppressing-warnings-for-clashing-note-columns.ly
@@ -1,17 +1,18 @@
-%% DO NOT EDIT this file manually; it is automatically
-%% generated from LSR http://lsr.di.unimi.it
-%% Make any changes in LSR itself, or in Documentation/snippets/new/ ,
-%% and then run scripts/auxiliar/makelsr.py
-%%
-%% This file is in the public domain.
-\version "2.18.0"
+% DO NOT EDIT this file manually; it is automatically
+% generated from Documentation/snippets/new
+% Make any changes in Documentation/snippets/new/
+% and then run scripts/auxiliar/makelsr.py
+%
+% This file is in the public domain.
+%% Note: this file works from version 2.19.14
+\version "2.19.14"

 
 \header {
   lsrtags = "simultaneous-notes, tweaks-and-overrides"
 
   texidoc = "
 If notes from two voices with stems in the same direction are placed at
 
 \header {
   lsrtags = "simultaneous-notes, tweaks-and-overrides"
 
   texidoc = "
 If notes from two voices with stems in the same direction are placed at

-the same position, and both voices have no shift or the same shift
+the same position, but the voices have no voice-specific shifts

 specified, the error message @samp{warning: ignoring too many clashing
 note columns} will appear when compiling the LilyPond file.  This
 message can be suppressed by setting the @code{'ignore-collision}
 specified, the error message @samp{warning: ignoring too many clashing
 note columns} will appear when compiling the LilyPond file.  This
 message can be suppressed by setting the @code{'ignore-collision}


@@ -19,18 +20,16 @@ property of the @code{NoteColumn} object to @code{#t}. Please note that
 this does not just suppress warnings  but stops LilyPond trying to
 resolve collisions at all and so may have  unintended results unless
 used with care.
 this does not just suppress warnings  but stops LilyPond trying to
 resolve collisions at all and so may have  unintended results unless
 used with care.

-

 "
   doctitle = "Suppressing warnings for clashing note columns"
 } % begin verbatim
 
 "
   doctitle = "Suppressing warnings for clashing note columns"
 } % begin verbatim
 

+

 ignore = \override NoteColumn.ignore-collision = ##t
 
 \relative c' {
 ignore = \override NoteColumn.ignore-collision = ##t
 
 \relative c' {

-  <<
-    \ignore
-    { \stemDown f2 g }
-    \\
-    { c2 c, }
+  \new Staff <<
+    \new Voice{ \ignore \stemDown f2 g }
+    \new Voice{ c2 \stemDown c, }

   >>
 }
   >>
 }

diff --git a/Documentation/snippets/tweaking-clef-properties.ly b/Documentation/snippets/tweaking-clef-properties.ly
index 645530ea2bec1f24bd044a876d69edc2afd59854..2a30cfa8e823f85950629a8038afa79a30c6d189 100644 (file)
--- a/Documentation/snippets/tweaking-clef-properties.ly
+++ b/Documentation/snippets/tweaking-clef-properties.ly
@@ -1,40 +1,29 @@
-%% DO NOT EDIT this file manually; it is automatically
-%% generated from LSR http://lsr.di.unimi.it
-%% Make any changes in LSR itself, or in Documentation/snippets/new/ ,
-%% and then run scripts/auxiliar/makelsr.py
-%%
-%% This file is in the public domain.
-\version "2.18.0"
+% DO NOT EDIT this file manually; it is automatically
+% generated from Documentation/snippets/new
+% Make any changes in Documentation/snippets/new/
+% and then run scripts/auxiliar/makelsr.py
+%
+% This file is in the public domain.
+%% Note: this file works from version 2.17.18
+\version "2.17.18"

 
 \header {
   lsrtags = "pitches, staff-notation, tweaks-and-overrides"
 
   texidoc = "
 
 \header {
   lsrtags = "pitches, staff-notation, tweaks-and-overrides"
 
   texidoc = "

-The command @code{\\clef \"treble_8\"} is equivalent to setting
-@code{clefGlyph}, @code{clefPosition} (which controls the vertical
-position of the clef), @code{middleCPosition} and
-@code{clefOctavation}. A clef is printed when any of the properties
-except @code{middleCPosition} are changed.
+Changing the Clef glyph, its position, or the ottavation does not
+change the position of subsequent notes on the staff.  To get key
+signatures on their correct staff lines @code{middleCClefPosition}
+must also be specified, with positive or negative values moving
+@emph{middle C} up or down respectively, relative to the staff's
+center line.

 
 

-
-Note that changing the glyph, the position of the clef, or the
-octavation does not in itself change the position of subsequent notes
-on the staff: the position of middle C must also be specified to do
-this. In order to get key signatures on the correct staff lines,
-@code{middleCClefPosition} must also be set.  The positional parameters
-are relative to the staff center line, positive numbers displacing
-upwards, counting one for each line and space. The
-@code{clefOctavation} value would normally be set to 7, -7, 15 or -15,
-but other values are valid.
-
-
-When a clef change takes place at a line break the new clef symbol is
-printed at both the end of the previous line and the beginning of the
-new line by default. If the warning clef at the end of the previous
-line is not required it can be suppressed by setting the @code{Staff}
-property @code{explicitClefVisibility} to the value
-@code{end-of-line-invisible}. The default behavior can be recovered
-with  @code{\\unset Staff.explicitClefVisibility}.
+For example, @code{\\clef \"treble_8\"} is equivalent to setting
+the @code{clefGlyph}, @code{clefPosition} (the vertical position
+of the clef itself on the staff), @code{middleCPosition} and
+@code{clefTransposition}. Note that when any of these properties
+(except @code{middleCPosition}) are changed a new clef symbol is
+printed.

 
 The following examples show the possibilities when setting these
 properties manually. On the first line, the manual changes preserve the
 
 The following examples show the possibilities when setting these
 properties manually. On the first line, the manual changes preserve the


@@ -45,10 +34,8 @@ line, they do not.
   doctitle = "Tweaking clef properties"
 } % begin verbatim
 
   doctitle = "Tweaking clef properties"
 } % begin verbatim
 

-\layout {
-  indent = 0
-  ragged-right = ##t
-}
+\layout { ragged-right = ##t } % begin verbatim
+

 {
   % The default treble clef
   \key f \major
 {
   % The default treble clef
   \key f \major

diff --git a/Documentation/snippets/tweaks-and-overrides.snippet-list b/Documentation/snippets/tweaks-and-overrides.snippet-list
index 35cacb18c3e016f8b1812ee5b941a029f7bf326d..723710de74d377e317ce5fdf1f989a4ed4f217b8 100644 (file)
--- a/Documentation/snippets/tweaks-and-overrides.snippet-list
+++ b/Documentation/snippets/tweaks-and-overrides.snippet-list
@@ -23,6 +23,7 @@ controlling-spanner-visibility-after-a-line-break.ly
 controlling-the-vertical-ordering-of-scripts.ly
 controlling-tuplet-bracket-visibility.ly
 creating-a-delayed-turn.ly
 controlling-the-vertical-ordering-of-scripts.ly
 controlling-tuplet-bracket-visibility.ly
 creating-a-delayed-turn.ly

+creating-custom-key-signatures.ly

 creating-double-digit-fingerings.ly
 creating-simultaneous-rehearsal-marks.ly
 creating-text-spanners.ly
 creating-double-digit-fingerings.ly
 creating-simultaneous-rehearsal-marks.ly
 creating-text-spanners.ly


@@ -51,12 +52,12 @@ how-to-change-fret-diagram-position.ly
 how-to-print-two-rehearsal-marks-above-and-below-the-same-barline-method-1.ly
 how-to-print-two-rehearsal-marks-above-and-below-the-same-barline-method-2.ly
 inserting-a-caesura.ly
 how-to-print-two-rehearsal-marks-above-and-below-the-same-barline-method-1.ly
 how-to-print-two-rehearsal-marks-above-and-below-the-same-barline-method-2.ly
 inserting-a-caesura.ly

-keep-change-clefs-full-sized.ly

 line-arrows.ly
 making-an-object-invisible-with-the-transparent-property.ly
 making-glissandi-breakable.ly
 manually-controlling-beam-positions.ly
 mensurstriche-layout-bar-lines-between-the-staves.ly
 line-arrows.ly
 making-an-object-invisible-with-the-transparent-property.ly
 making-glissandi-breakable.ly
 manually-controlling-beam-positions.ly
 mensurstriche-layout-bar-lines-between-the-staves.ly

+modifying-the-ottava-spanner-slope.ly

 moving-dotted-notes-in-polyphony.ly
 moving-slur-positions-vertically.ly
 nesting-staves.ly
 moving-dotted-notes-in-polyphony.ly
 moving-slur-positions-vertically.ly
 nesting-staves.ly