Guide, node Updating translation committishes..
@end ignore
-@c \version "2.16.0"
+@c \version "2.19.29"
@node Simultaneous notes
and @code{>}. A chord may be followed by a duration just like simple
notes.
-@lilypond[verbatim,quote,relative=2]
-<a c e>1 <a c e>2 <f a c e>4 <a c>8. <g c e>16
+@lilypond[verbatim,quote]
+\relative {
+ <a' c e>1 <a c e>2 <f a c e>4 <a c>8. <g c e>16
+}
@end lilypond
Chords may also be followed by articulations, again just like simple
notes.
-@lilypond[verbatim,quote,relative=2]
-<a c e>1\fermata <a c e>2-> <f a c e>4\prall <a c>8.^| <g c e>16-.
+@lilypond[verbatim,quote]
+\relative {
+ <a' c e>1\fermata <a c e>2-> <f a c e>4\prall <a c>8.^! <g c e>16-.
+}
@end lilypond
The notes within the chord themselves can also be followed by articulation
and ornamentation.
-@lilypond[verbatim,quote,relative=2]
-<a c\prall e>1 <a-> c-^ e>2 <f-. a c-. e-.>4
-<a-+ c-->8. <g\fermata c e\turn>16
+@lilypond[verbatim,quote]
+\relative {
+ <a' c\prall e>1 <a-> c-^ e>2 <f-. a c-. e-.>4
+ <a-+ c-->8. <g\fermata c e\turn>16
+}
@end lilypond
-However some notation, such as dynamics, hairpins and slurs must be
-attached to the chord, rather than notes within the chord, otherwise
-they will not print.
+However some notation, such as dynamics and hairpins must be
+attached to the chord rather than to notes within the chord,
+otherwise they will not print. Other notation like fingerings and
+slurs will get placed markedly different when attached to notes
+within a chord rather than to whole chords or single notes.
-@lilypond[verbatim,quote,relative=2]
-<a\f c( e>1 <a c) e>\f <a\< c e>( <a\! c e>)
-<a c e>\< <a c e> <a c e>\!
+@lilypond[verbatim,quote]
+\relative {
+ <a'\f c( e>1 <a c) e>\f <a\< c e>( <a\! c e>)
+ <a c e>\< <a c e> <a c e>\!
+}
@end lilypond
@cindex chords, empty
be combined with them (for more complex possibilities of combining such
elements, see @ref{Simultaneous expressions}):
-@lilypond[verbatim,quote,relative=2]
-\grace { g8[( a b] }
-<> ) \p \< -. -\markup \italic "sempre staccato"
-\repeat unfold 4 { c4 e } c1\f
+@lilypond[verbatim,quote]
+\relative {
+ \grace { g'8( a b }
+ <> ) \p \< -. -\markup \italic "sempre staccato"
+ \repeat unfold 4 { c4 e } c1\f
+}
@end lilypond
@cindex relative pitch, chords
in the chord are relative to the note that came before it
@emph{within the same chord}.
-@lilypond[verbatim,quote,relative=2]
-<a c e>1 <f a c> <a c e> <f' a c> <b, e b,>
+@lilypond[verbatim,quote]
+\relative {
+ <a' c e>1 <f a c> <a c e> <f' a c> <b, e b,>
+}
@end lilypond
For more information about chords, see @ref{Chord notation}.
@node Chord repetition
@unnumberedsubsubsec Chord repetition
-@cindex Chord, repetition
+@cindex chord, repetition
@cindex repetition, using @code{q}
+@cindex @code{q}, chord repetition
In order to save typing, a shortcut can be used to repeat the preceding
chord. The chord repetition symbol is @code{q}:
-@lilypond[verbatim,quote,relative=2]
-<a c e>1 q <f a c>2 q
+@lilypond[verbatim,quote]
+\relative {
+ <a' c e>1 q <f a c>2 q
+}
@end lilypond
As with regular chords, the chord repetition symbol can be used with
-durations, articulations, markups, slurs, beams, etc. as only the
+durations, articulations, markups, slurs, beams, etc., as only the
pitches of the previous chord are duplicated.
-@lilypond[verbatim,quote,relative=2]
-<a c e>1\p^"text" q2\<( q8)[-| q8.]\! q16-1-2-3 q8\prall
+@lilypond[verbatim,quote]
+\relative {
+ <a' c e>1\p^"text" q2\<( q8)[-! q8.]\! q16-1-2-3 q8\prall
+}
@end lilypond
The chord repetition symbol always remembers the last instance of
a chord so it is possible to repeat the most recent chord even if
other non-chorded notes or rests have been added since.
-@lilypond[verbatim,quote,relative=2]
-<a c e>1 c'4 q2 r8 q8 |
-q2 c, |
+@lilypond[verbatim,quote]
+\relative {
+ <a' c e>1 c'4 q2 r8 q8 |
+ q2 c, |
+}
@end lilypond
However, the chord repetition symbol does not retain any dynamics,
articulation or ornamentation within, or attached to, the previous
chord.
-@lilypond[verbatim,quote,relative=2]
-<a-. c\prall e>1\sfz c'4 q2 r8 q8 |
-q2 c, |
+@lilypond[verbatim,quote]
+\relative {
+ <a'-. c\prall e>1\sfz c'4 q2 r8 q8 |
+ q2 c, |
+}
@end lilypond
To have some of them retained, the @code{\chordRepeats} function can be
present on the @code{q} chord itself.
@lilypond[verbatim,quote]
-\relative c'' {
+\relative {
\chordRepeats #'(articulation-event)
- { <a-. c\prall e>1\sfz c'4 q2 r8 q8-. } |
+ { <a'-. c\prall e>1\sfz c'4 q2 r8 q8-. } |
q2 c, |
}
@end lilypond
affect the outer one; hence the different octave entry of the final note
in this example.
-@c Without \new Voice, implicit voice creation does the dumbest thing.
@lilypond[verbatim,quote]
-\new Voice
-\relative c'' {
+\relative {
\chordRepeats #'(articulation-event)
- \relative c''
- { <a-. c\prall e>1\sfz c'4 q2 r8 q8-. } |
- q2 c |
+ \relative
+ { <a'-. c\prall e>1\sfz c'4 q2 r8 q8-. } |
+ q2 c'' |
}
@end lilypond
The following examples show simultaneous expressions on one staff:
-@lilypond[quote,verbatim,relative=2]
+@lilypond[quote,verbatim]
\new Voice { % explicit single voice
- << { a4 b g2 } { d4 g c,2 } >>
+ << \relative { a'4 b g2 }
+ \relative { d'4 g c,2 } >>
}
@end lilypond
-@lilypond[quote,verbatim,relative=2]
-% single first note
-a << { a4 b g } { d4 g c, } >>
+@lilypond[quote,verbatim]
+\relative {
+ % single first note
+ a' << \relative { a'4 b g }
+ \relative { d'4 g c, } >>
+}
@end lilypond
This can be useful if the simultaneous sections have identical
changes in a @emph{single} @samp{Voice} are collected and engraved in
musical order:
-@lilypond[quote,verbatim,relative=2]
-<a c>4-. <>-. << c a >> << { c-. <c a> } { a s-. } >>
+@lilypond[quote,verbatim]
+\relative {
+ <a' c>4-. <>-. << c a >> << { c-. <c a> } { a s-. } >>
+}
@end lilypond
Multiple stems or beams or different note durations or properties at
The following example shows how simultaneous expressions can
generate multiple staves implicitly:
-@lilypond[quote,verbatim,relative=2]
+@lilypond[quote,verbatim]
% no single first note
-<< { a4 b g2 } { d4 g2 c,4 } >>
+<< \relative { a'4 b g2 }
+ \relative { d'4 g2 c,4 } >>
@end lilypond
Here different rhythms cause no problems because they are
interpreted in different voices.
-@cindex collisions, clashing note columns
@cindex collisions, ignoring
@knownissues
-If notes from two or more voices, with stems in the same direction, are
-placed at the same position on the staff and have no shift (or have the
-same shift specified), the message:
+If notes from two or more voices, with no shifts specified,
+have stems in the same direction, the message
@example
-warning: ignoring too many clashing note columns
+warning: This voice needs a \voiceXx or \shiftXx setting
@end example
will appear during compilation. This message can be suppressed by:
@example
-\override NoteColumn #'ignore-collision = ##t
+\override NoteColumn.ignore-collision = ##t
@end example
However, this not only suppresses the warning but will prevent any
@cindex note cluster
@funindex \makeClusters
-@funindex makeClusters
A cluster indicates a continuous range of pitches to be played.
They can be denoted as the envelope of a set of notes. They are
entered by applying the function @code{\makeClusters} to a sequence
of chords, e.g.,
-@lilypond[quote,relative=2,verbatim]
-\makeClusters { <g b>2 <c g'> }
+@lilypond[quote,verbatim]
+\relative \makeClusters { <g' b>2 <c g'> }
@end lilypond
Ordinary notes and clusters can be put together in the same staff,
* Single-staff polyphony::
* Voice styles::
* Collision resolution::
+* Merging rests::
* Automatic part combining::
* Writing music in parallel::
@end menu
@cindex lyrics assigned to one voice
@funindex \voiceOne
-@funindex voiceOne
@funindex \voiceOne ... \voiceFour
@funindex Voice
@funindex \oneVoice
-@funindex oneVoice
@subsubsubheading Explicitly instantiating voices
The basic structure needed to achieve multiple independent
voices in a single staff is illustrated in the following example:
-@lilypond[quote,relative=3,verbatim]
+@lilypond[quote,verbatim]
\new Staff <<
\new Voice = "first"
- { \voiceOne r8 r16 g e8. f16 g8[ c,] f e16 d }
+ \relative { \voiceOne r8 r16 g'' e8. f16 g8[ c,] f e16 d }
\new Voice= "second"
- { \voiceTwo d16 c d8~ d16 b c8~ c16 b c8~ c16 b8. }
+ \relative { \voiceTwo d''16 c d8~ 16 b c8~ 16 b c8~ 16 b8. }
>>
@end lilypond
construct:
@example
-<< @{ \voiceOne ... @}
- \new Voice @{ \voiceTwo ... @}
+<< @{ \voiceOne @dots{} @}
+ \new Voice @{ \voiceTwo @dots{} @}
>> \oneVoice
@end example
This allows lyrics to be assigned to one continuing voice before,
during and after a polyphonic section:
-@lilypond[quote, verbatim, relative=2]
-<<
+@lilypond[quote,verbatim]
+\relative <<
\new Voice = "melody" {
- a4
+ a'4
<<
{
\voiceOne
@subsubsubheading The double backslash construct
-The @code{<< @{...@} \\ @{...@} >>} construct, where the two (or
+The @code{<< @{@dots{}@} \\ @{@dots{}@} >>} construct, where the two (or
more) expressions are separated by double backslashes, behaves
differently to the similar construct without the double backslashes:
@emph{all} the expressions within this construct are assigned
The first example could be typeset as follows:
-@lilypond[quote,relative=3,verbatim]
+@lilypond[quote,verbatim]
<<
- { r8 r16 g e8. f16 g8[ c,] f e16 d }
+ \relative { r8 r16 g'' e8. f16 g8[ c,] f e16 d }
\\
- { d16 c d8~ d16 b c8~ c16 b c8~ c16 b8. }
+ \relative { d''16 c d8~ 16 b c8~ 16 b c8~ 16 b8. }
>>
@end lilypond
three, which has the stems up as desired. Spacer rests are
used to avoid printing doubled rests.
-@lilypond[quote,relative=3,verbatim]
+@lilypond[quote,verbatim]
<<
- { r8 g g g g f16 ees f8 d }
+ \relative { r8 g'' g g g f16 ees f8 d }
\\
- { ees,8 r ees r d r d r }
+ \relative { ees'8 r ees r d r d r }
\\
- { d'8 s c s bes s a s }
+ \relative { d''8 s c s bes s a s }
>>
@end lilypond
>>
@end lilypond
-@warning{Lyrics, spanners (such as slurs, ties, hairpins etc.) cannot be
-created @q{across} voices.}
+@funindex \voices
+When a different voice entry order is desired, the command
+@code{\voices} may be convenient:
+
+@lilypond[quote,verbatim]
+\new Staff \voices 1,3,5,6,4,2 <<
+ \time 2/4
+ { f''2 } % 1: highest
+ \\
+ { d''2 } % 3: second-highest
+ \\
+ { b'2 } % 5: third-highest
+ \\
+ { g'2 } % 6: third-lowest
+ \\
+ { e'2 } % 4: second-lowest
+ \\
+ { c'2 } % 2: lowest
+>>
+@end lilypond
+
+
+@warning{Lyrics and spanners (such as slurs, ties, hairpins, etc.) cannot
+be created @q{across} voices.}
@subsubsubheading Identical rhythms
@code{Voice} context, thus forming chords. To achieve this, enclose
them in a simple simultaneous music construct within an explicit voice:
-@lilypond[quote,relative=2,verbatim]
+@lilypond[quote,verbatim]
\new Voice <<
- { e4 f8 d e16 f g8 d4 }
- { c4 d8 b c16 d e8 b4 }
+ \relative { e''4 f8 d e16 f g8 d4 }
+ \relative { c''4 d8 b c16 d e8 b4 }
>>
@end lilypond
Voices may be given distinct colors and shapes, allowing them to be
easily identified:
-@lilypond[quote,relative=2,verbatim]
+@lilypond[quote,verbatim]
<<
- { \voiceOneStyle d4 c2 b4 }
+ \relative { \voiceOneStyle d''4 c2 b4 }
\\
- { \voiceTwoStyle e,2 e }
+ \relative { \voiceTwoStyle e'2 e }
\\
- { \voiceThreeStyle b2. c4 }
+ \relative { \voiceThreeStyle b2. c4 }
\\
- { \voiceFourStyle g'2 g }
+ \relative { \voiceFourStyle g'2 g }
>>
@end lilypond
@cindex voices, multiple
@cindex shift rest, automatic
@funindex \shiftOn
-@funindex shiftOn
@funindex \shiftOnn
-@funindex shiftOnn
@funindex \shiftOnnn
-@funindex shiftOnnn
@funindex \shiftOff
-@funindex shiftOff
@funindex \mergeDifferentlyDottedOn
-@funindex mergeDifferentlyDottedOn
@funindex \mergeDifferentlyDottedOff
-@funindex mergeDifferentlyDottedOff
@funindex \mergeDifferentlyHeadedOn
-@funindex mergeDifferentlyHeadedOn
@funindex \mergeDifferentlyHeadedOff
-@funindex mergeDifferentlyHeadedOff
The note heads of notes in different voices with the same pitch,
same note head and opposite stem direction are automatically
different circumstances, on beats 1 and 3 in bar 1 and beat 1
in bar 2, where the automatic merging fails.
-@lilypond[quote,verbatim,relative=2]
+@lilypond[quote,verbatim]
<<
- {
- c8 d e d c d c4
+ \relative {
+ c''8 d e d c d c4
g'2 fis
- } \\ {
- c2 c8. b16 c4
+ } \\
+ \relative {
+ c''2 c8. b16 c4
e,2 r
- } \\ {
+ } \\
+ \relative {
\oneVoice
s1
- e8 a b c d2
+ e'8 a b c d2
}
>>
@end lilypond
-Notes with different note heads may be merged, with the
-exception of half-note heads and quarter-note heads, as shown
-below. Here the note heads on beat 1 of bar 1 are now merged:
+Notes with different note heads may be merged as shown
+below. In this example the note heads on beat 1 of bar 1 are now merged:
-@lilypond[quote,verbatim,relative=2]
+@lilypond[quote,verbatim]
<<
- {
+ \relative {
\mergeDifferentlyHeadedOn
- c8 d e d c d c4
+ c''8 d e d c d c4
g'2 fis
- } \\ {
- c2 c8. b16 c4
+ } \\
+ \relative {
+ c''2 c8. b16 c4
e,2 r
- } \\ {
+ } \\
+ \relative {
\oneVoice
s1
- e8 a b c d2
+ e'8 a b c d2
}
>>
@end lilypond
+Quarter and half notes are not merged in this way, since it would be difficult
+to tell them apart.
+
Note heads with different dots as shown in beat 3 of bar 1 may be
also be merged:
-@lilypond[quote,relative=2,verbatim]
+@lilypond[quote,verbatim]
<<
- {
+ \relative {
\mergeDifferentlyHeadedOn
\mergeDifferentlyDottedOn
- c8 d e d c d c4
+ c''8 d e d c d c4
g'2 fis
- } \\ {
- c2 c8. b16 c4
+ } \\
+ \relative {
+ c''2 c8. b16 c4
e,2 r
- } \\ {
+ } \\
+ \relative {
\oneVoice
s1
- e8 a b c d2
+ e'8 a b c d2
}
>>
@end lilypond
@notation{g} out of the column, and @code{\mergeDifferentlyHeadedOn}
then works properly.
-@lilypond[quote,relative=2,verbatim]
+@lilypond[quote,verbatim]
<<
- {
+ \relative {
\mergeDifferentlyHeadedOn
\mergeDifferentlyDottedOn
- c8 d e d c d c4
+ c''8 d e d c d c4
\shiftOn
g'2 fis
- } \\ {
- c2 c8. b16 c4
+ } \\
+ \relative {
+ c''2 c8. b16 c4
e,2 r
- } \\ {
+ } \\
+ \relative {
\oneVoice
s1
- e8 a b c d2
+ e'8 a b c d2
}
>>
@end lilypond
vertical order of voices on the staff!}
@lilypond[quote,verbatim]
-\new Staff \relative c'' {
+\new Staff \relative {
%% abbreviated entry
<<
- { f2 } % 1: highest
+ { f''2 } % 1: highest
\\
{ g,2 } % 2: lowest
\\
@cindex collisions, ignoring
@knownissues
-Using @code{\override NoteColumn #'ignore-collision = ##t} will cause
+Using @code{\override NoteColumn.ignore-collision = ##t} will cause
differently headed notes in different voices to merge incorrectly.
-@lilypond[quote,relative=1,verbatim]
+@lilypond[quote,verbatim,fragment]
\mergeDifferentlyHeadedOn
-<< { c16 a' b a } \\ { c,2 } >>
-\override NoteColumn #'ignore-collision = ##t
-<< { c16 a' b a } \\ { c,2 } >>
+<< \relative { c'16 a' b a } \\ \relative { c'2 } >>
+\override NoteColumn.ignore-collision = ##t
+<< \relative { c'16 a' b a } \\ \relative { c'2 } >>
@end lilypond
@ignore
@end ignore
+@node Merging rests
+@unnumberedsubsubsec Merging rests
+
+When using multiple voices it is common to merge rests which occur in both
+parts. This can be accomplished using @code{Merge_rests_engraver}.
+
+@lilypond[quote,verbatim]
+voiceA = \relative { d''4 r d2 | R1 | }
+voiceB = \relative { fis'4 r g2 | R1 | }
+\score {
+ <<
+ \new Staff \with {
+ instrumentName = "unmerged"
+ }
+ <<
+ \new Voice { \voiceOne \voiceA }
+ \new Voice { \voiceTwo \voiceB }
+ >>
+ \new Staff \with {
+ instrumentName = "merged"
+ \consists #Merge_rests_engraver
+ }
+ <<
+ \new Voice { \voiceOne \voiceA }
+ \new Voice { \voiceTwo \voiceB }
+ >>
+ >>
+}
+@end lilypond
+
+Setting the context property @code{suspendRestMerging} to @code{##t} allows for
+turning off rest merging temporarily.
+
@node Automatic part combining
@unnumberedsubsubsec Automatic part combining
@cindex a due part
@cindex solo part
@funindex \partcombine
-@funindex partcombine
Automatic part combining is used to merge two separate parts of music
onto a single staff. This can be especially helpful when typesetting
the combined staff.
@lilypond[quote,verbatim]
-instrumentOne = \relative c' {
- c4 d e f |
+instrumentOne = \relative {
+ c'4 d e f |
R1 |
d'4 c b a |
b4 g2 f4 |
e1 |
}
-instrumentTwo = \relative g' {
+instrumentTwo = \relative {
R1 |
- g4 a b c |
+ g'4 a b c |
d4 c b a |
g4 f( e) d |
e1 |
respectively. The unison (@notation{a due}) parts are marked with the
text @qq{a2}.
+By default, the partcombiner merges two notes of the same pitch as an
+@notation{a due} note, combines notes with the same
+rhythm less than a ninth apart as chords and separates notes more than
+a ninth apart (or when the voices cross) into
+separate voices. This can be overridden with an optional argument of a pair
+of numbers after the @code{\partcombine} command: the first specifies
+the interval where notes start to be combined (the default is zero) and the
+second where the notes are split into separate voices. Setting the second
+argument to zero means that the partcombiner splits notes with an interval of
+a second or more, setting it to one splits notes of a third or more, and so on.
+
+@lilypond[quote,verbatim]
+instrumentOne = \relative {
+ a4 b c d |
+ e f g a |
+ b c d e |
+}
+
+instrumentTwo = \relative {
+ c'4 c c c |
+ c c c c |
+ c c c c |
+}
+
+<<
+ \new Staff \partcombine \instrumentOne \instrumentTwo
+ \new Staff \partcombine #'(2 . 3) \instrumentOne \instrumentTwo
+>>
+@end lilypond
+
+
Both arguments to @code{\partcombine} will be interpreted as separate
@code{Voice} contexts, so if the music is being specified in relative
mode then @emph{both} parts must contain a @code{\relative} function,
@code{@var{musicexpr2}}.
@funindex \partcombineChords
-@funindex partcombineChords
@funindex \partcombineApart
-@funindex partcombineApart
@funindex \partcombineUnisono
-@funindex partcombineUnisono
@funindex \partcombineSoloI
-@funindex partcombineSoloI
@funindex \partcombineSoloII
-@funindex partcombineSoloII
@funindex \partcombineAutomatic
-@funindex partcombineAutomatic
In professional scores, voices are often kept apart from each other for
long passages of music even if some of the notes are the same in both
voices, and could just as easily be printed as unison. Combining notes
into a chord, or showing one voice as solo is, therefore, not ideal as
the @code{\partcombine} function considers each note separately. In this
-case the @code{\partcombine} function can be overriden with the
-following commands:
-
-Commands ending in @code{...Once} apply only to the next note in the
-music expression.
+case the @code{\partcombine} function can be overridden with one of the
+following commands. All of the commands may be preceded with
+@code{\once} in order to have them only apply to the next note in
+the music expression.
@itemize
@item
-@code{\partcombineApart} and @code{\partcombineApartOnce} keep the
+@code{\partcombineApart} keeps the
notes as two separate voices, even if they can be combined into a chord
or unison.
@item
-@code{\partcombineChords} and @code{\partcombineChordsOnce} combine the
+@code{\partcombineChords} combines the
notes into a chord.
@item
-@code{\partcombineUnisono} and @code{\partcombineUnisonoOnce} combine
+@code{\partcombineUnisono} combines
both voices as @qq{unison}.
@item
-@code{\partcombineSoloI} and @code{\partcombineSoloIOnce} print only
-voice one, and mark it as a @qq{Solo}.
+@code{\partcombineSoloI} prints only
+voice one, and marks it as a @qq{Solo}.
@item
-@code{\partcombineSoloII} or @code{\partcombineSoloIIOnce} print only
-voice two and mark it as a @qq{Solo}.
+@code{\partcombineSoloII} prints only
+voice two and marks it as a @qq{Solo}.
@item
-@code{\partcombineAutomatic} and @code{\partcombineAutomaticOnce} end
-the functions of the commands above, and revert back to the standard
+@code{\partcombineAutomatic} ends
+the functions of the commands above, and reverts back to the standard
@code{\partcombine} functionality.
@end itemize
\partcombineAutomatic e2^"auto" e |
\partcombineChords e'2^"chord" e |
\partcombineAutomatic c2^"auto" c |
- \partcombineApart c2^"apart" \partcombineChordsOnce e^"chord once" |
+ \partcombineApart c2^"apart" \once \partcombineChords e^"chord once" |
c2 c |
}
-instrumentTwo = \relative c' {
- c2 c |
+instrumentTwo = \relative {
+ c'2 c |
e2 e |
a,2 c |
c2 c' |
@end lilypond
+@subsubsubheading Using \partcombine with lyrics
+
+@cindex \partcombine and lyrics
+
+The @code{\partcombine} command is not designed to work with
+lyrics; if one of the voices is explicitly named in order to
+attach lyrics to it, the partcombiner will stop working. However,
+this effect can be achieved using a @code{NullVoice} context. See
+@ref{Polyphony with shared lyrics}.
+
+
@snippets
@lilypondfile[verbatim,quote,texidoc,doctitle]
@rinternals{Voice}.
@knownissues
-All @code{\partcombine...} functions can only accept two voices and are
-not designed to work with lyrics; such that when one of the voices is
-explicitly named in order to attach lyrics to it, the partcombiner will
-stop working.
+All @code{\partcombine@dots{}} functions can only accept two voices.
-@code{\partcombine...} functions cannot be placed inside a @code{\times}
+@code{\partcombine@dots{}} functions cannot be placed inside a @code{\tuplet}
or @code{\relative} block.
If @code{printPartCombineTexts} is set and the two voices play the same
@code{Voice}. This can lead to a number of unexpected issues including
@qq{Solo} or @qq{Unison} marks being printed incorrectly.
-@code{\partcombine} keeps all spanners (slurs, ties, hairpins etc.) in
+@code{\partcombine} keeps all spanners (slurs, ties, hairpins, etc.) in
the same @code{Voice} so that if any such spanners start or end in a
different @code{Voice}, they may not be printed properly or at all.
If the @code{\partcombine} function cannot combine both music
-expressions (i.e. when both voices have different durations), it will
+expressions (i.e., when both voices have different durations), it will
give the voices, internally, its own custom names: @code{one} and
@code{two} respectively. This means if there is any @qq{switch} to a
differently named @code{Voice} context, the events in that differently
@cindex interleaved music
@cindex parallel music
@funindex \parallelMusic
-@funindex parallelMusic
Music for multiple parts can be interleaved in input code. The
function @code{\parallelMusic} accepts a list with the names of a
\parallelMusic #'(voiceA voiceB voiceC) {
% Bar 1
r8 g'16 c'' e'' g' c'' e'' r8 g'16 c'' e'' g' c'' e'' |
- r16 e'8.~ e'4 r16 e'8.~ e'4 |
+ r16 e'8.~ 4 r16 e'8.~ 4 |
c'2 c'2 |
% Bar 2
r8 a'16 d'' f'' a' d'' f'' r8 a'16 d'' f'' a' d'' f'' |
- r16 d'8.~ d'4 r16 d'8.~ d'4 |
+ r16 d'8.~ 4 r16 d'8.~ 4 |
c'2 c'2 |
}
\parallelMusic #'(voiceA voiceB voiceC) {
% Bar 1
r8 g16 c e g, c e r8 g,16 c e g, c e |
- r16 e8.~ e4 r16 e8.~ e4 |
+ r16 e8.~ 4 r16 e8.~ 4 |
c2 c |
% Bar 2
r8 a,16 d f a, d f r8 a,16 d f a, d f |
- r16 d8.~ d4 r16 d8.~ d4 |
+ r16 d8.~ 4 r16 d8.~ 4 |
c2 c |
}
projects / lilypond.git / blobdiff