Attempts to compile LilyPond natively on Windows have been
unsuccessful, though a workaround is available (see
-@rcontrib{Lilydev}).
+@rcontrib{LilyDev}).
@node Requirements
@node Requirements for running LilyPond
@subsection Requirements for running LilyPond
-Running LilyPond requires proper installation of the following
-software:
+This section contains the list of separate software packages that are
+required to run LilyPond.
@itemize
-@item @uref{http://www.dejavu-fonts.org/, DejaVu fonts} (normally
-installed by default)
-@item @uref{http://www.fontconfig.org/, FontConfig} (2.4.0 or newer)
+@item @uref{http://www.dejavu-fonts.org/, DejaVu fonts}
+These are normally installed by default.
-@item @uref{http://www.freetype.org/, Freetype} (2.1.10 or newer)
+@item
+@uref{http://www.fontconfig.org/, FontConfig}
+Use version 2.4.0 or newer.
-@item @uref{http://www.ghostscript.com, Ghostscript} (8.60 or
-newer)
+@item
+@uref{http://www.freetype.org/, Freetype}
+Use version 2.1.10 or newer.
-@item @uref{http://www.gnu.org/software/guile/guile.html, Guile}
-(1.8.2 or newer)
+@item
+@uref{http://www.ghostscript.com, Ghostscript}
+Use version 8.60 or newer.
-@item @uref{http://www.pango.org/, Pango} (1.12 or newer)
+@item
+@uref{http://www.gnu.org/software/guile/guile.html, Guile}
+Use version 1.8.8. Version 2.x of Guile is not currently supported.
-@item @uref{http://www.python.org, Python} (2.4 or newer)
-@end itemize
+@item
+@uref{http://www.pango.org/, Pango}
+User version 1.12 or newer.
+
+@item
+@uref{http://www.python.org, Python}
+Use version 2.4 or newer.
+
+@item
+International fonts. For example:
+
+Fedora:
+
+@example
+fonts-arabic
+fonts-hebrew
+fonts-ja
+fonts-xorg-truetype
+taipeifonts
+ttfonts-ja
+ttfonts-zh_CN
+@end example
-International fonts are required to create music with
-international text or lyrics.
+Debian based distributions:
+
+@example
+emacs-intl-fonts
+fonts-ipafont-gothic
+fonts-ipafont-mincho
+xfonts-bolkhov-75dpi
+xfonts-cronyx-75dpi
+xfonts-cronyx-100dpi
+xfonts-intl-.*
+@end example
+
+These are normally installed by default and are required only to create
+music with international text or lyrics.
+
+@end itemize
@node Requirements for compiling LilyPond
@subsection Requirements for compiling LilyPond
-Below is a full list of packages needed to build LilyPond.
-However, for most common distributions there is an easy way of
-installing most all build dependencies in one go:
+This section contains instructions on how to quickly and easily get all
+the software packages required to build LilyPond.
+
+Most of the more popular Linux distributions only require a few simple
+commands to download all the software needed. For others, there is an
+explicit list of all the individual packages (as well as where to get
+them from) for those that are not already included in your
+distributions' own repositories.
+
+@ignore
+I have tested all of the following four Linux Distributions listed here
+Using a simple virtual machine and the appropriate ISO image file
+downloaded from each distribution's own website. The instructions
+documented were run immediately after the initial installation
+(without any further additional configuration to the OS) and I made sure
+that I was able to run the full set of make, make test-baseline, make
+check and a full make doc. - James
+@end ignore
+
+@menu
+* Fedora::
+* Linux Mint::
+* OpenSUSE::
+* Ubuntu::
+* Other::
+@end menu
+
+
+@node Fedora
+@unnumberedsubsubsec Fedora
+
+The following instructions were tested on @q{Fedora} versions 22 & 23
+and will download all the software required to both compile LilyPond and
+build the documentation.
+
+@itemize
+
+@item
+Download and install all the LilyPond build-dependencies (approximately
+700MB);
+
+@example
+sudo dnf builddep lilypond --nogpgcheck
+@end example
+
+@item
+Download and install additional @q{build} tools required for compiling;
+
+@example
+sudo dnf install autoconf gcc-c++
+@end example
+
+@item
+Download @code{texi2html 1.82} directly from:
+@uref{http://download.savannah.gnu.org/releases/texi2html/texi2html-1.82.tar.gz};
+
+@code{texi2html} is only required if you intend to compile LilyPond's
+own documentation (e.g. to help with any document writing). The version
+available in the Fedora repositories is too new and will not work.
+Extract the files into an appropriate location and then run the
+commands;
+
+@example
+./configure
+make
+sudo make install
+@end example
+
+This should install @code{texi2html 1.82} into @code{/usr/local/bin},
+which will normally take priority over @code{/usr/bin} where the
+later, pre-installed versions gets put. Now verify that your operating
+system is able to see the correct version of @code{texi2html}.
+
+@example
+texi2html --version
+@end example
+
+@item
+Although not @q{required} to compile LilyPond, if you intend to
+contribute to LilyPond (codebase or help improve the documentation) then
+it is recommended that you also need to install @code{git}.
+
+@example
+sudo dnf install git
+@end example
+
+Also see @ruser{Starting with Git}.
+
+@item
+To use the @code{lily-git.tcl} GUI;
+
+@example
+sudo dnf install tk
+@end example
+
+See @ruser{lily-git}.
+
+@end itemize
+
+@warning{By default, when building LilyPond's documentation,
+@code{pdfTeX} is be used. However ligatures (fi, fl, ff etc.) may not
+be printed in the PDF output. In this case XeTeX can be used instead.
+Download and install the @code{texlive-xetex} package.
+
+@example
+sudo dnf install texlive-xetex
+@end example
+
+The scripts used to build the LilyPond documentation will use
+@code{XeTex} instead of @code{pdfTex} to generate the PDF documents if
+it is available. No additional configuration is required.}
+
+
+
+@node Linux Mint
+@unnumberedsubsubsec Linux Mint
+
+The following instructions were tested on @q{Linux Mint 17.1} and
+@q{LMDE - Betsy} and will download all the software required to both
+compile LilyPond and build the documentation..
+
+@itemize
+
+@item
+Enable the @emph{sources} repository;
+
+@enumerate
+
+@item
+Using the @emph{Software Sources} GUI (located under
+@emph{Administration}).
+
+@item
+Select @emph{Official Repositories}.
+
+@item
+Check the @emph{Enable source code repositories} box under the
+@emph{Source Code} section.
+
+@item
+Click the @emph{Update the cache} button and when it has completed,
+close the @emph{Software Sources} GUI.
+
+@end enumerate
+
+@item
+Download and install all the LilyPond build-dependencies (approximately
+200MB);
+
+@example
+sudo apt-get build-dep lilypond
+@end example
+
+@item
+Download and install additional @q{build} tools required for compiling;
+
+@example
+sudo apt-get install autoconf fonts-texgyre texlive-lang-cyrillic
+@end example
+
+@item
+Although not @q{required} to compile LilyPond, if you intend to
+contribute to LilyPond (codebase or help improve the documentation) then
+it is recommended that you also need to install @code{git}.
+
+@example
+sudo apt-get install git
+@end example
+
+Also see @ruser{Starting with Git}.
+
+@item
+To use the @code{lily-git.tcl} GUI;
+
+@example
+sudo apt-get install tk
+@end example
+
+Also see @ruser{lily-git}.
+
+@end itemize
+
+@warning{By default, when building LilyPond's documentation,
+@code{pdfTeX} is be used. However ligatures (fi, fl, ff etc.) may not
+be printed in the PDF output. In this case XeTeX can be used instead.
+Download and install the @code{texlive-xetex} package.
+
+@example
+sudo apt-get install texlive-xetex
+@end example
+
+The scripts used to build the LilyPond documentation will use
+@code{XeTex} instead of @code{pdfTex} to generate the PDF documents if
+it is available. No additional configuration is required.}
+
+
+@node OpenSUSE
+@unnumberedsubsubsec OpenSUSE
+
+The following instructions were tested on @q{OpenSUSE 13.2} and will
+download all the software required to both compile LilyPond and build
+the documentation.
+
+@itemize
+
+@item
+Add the @emph{sources} repository;
+
+@smallexample
+sudo zypper addrepo -f \
+"http://download.opensuse.org/source/distribution/13.2/repo/oss/" sources
+@end smallexample
-@multitable @columnfractions .5 .5
-@headitem Distribution @tab Command
-@item Debian, Ubuntu
-@tab @code{sudo apt-get build-dep lilypond}
+@item
+Download and install all the LilyPond build-dependencies (approximately
+680MB);
+
+@example
+sudo zypper source-install lilypond
+@end example
+
+@item
+Download and install additional @q{build} tools required for compiling;
+
+@example
+sudo zypper install make
+@end example
+
+@item
+Although not @q{required} to compile LilyPond, if you intend to
+contribute to LilyPond (codebase or help improve the documentation) then
+it is recommended that you also need to install @code{git}.
+
+@example
+sudo zypper install git
+@end example
+
+Also see @ruser{Starting with Git}.
+
+@item
+To use the @code{lily-git.tcl} GUI;
-@item Fedora, RHEL
-@tab @code{sudo yum-builddep lilypond}
+@example
+sudo zypper install tk
+@end example
+
+Also see @ruser{lily-git}.
+
+@end itemize
+
+@warning{By default, when building LilyPond's documentation,
+@code{pdfTeX} is be used. However ligatures (fi, fl, ff etc.) may not
+be printed in the PDF output. In this case XeTeX can be used instead.
+Download and install the @code{texlive-xetex} package.
+
+@example
+sudo zypper install texlive-xetex
+@end example
-@item openSUSE, SLED
-@c sorry for the idiosyncratic command, I really asked and argued
-@c for "zypper build-dep" :-(
-@tab @code{sudo zypper --build-deps-only source-install lilypond}
-@end multitable
+The scripts used to build the LilyPond documentation will use
+@code{XeTex} instead of @code{pdfTex} to generate the PDF documents if
+it is available. No additional configuration is required.}
+
+@node Ubuntu
+@unnumberedsubsubsec Ubuntu
+
+The following commands were tested on Ubuntu versions @code{14.04 LTS},
+@code{14.10} and @code{15.04} and will download all the software
+required to both compile LilyPond and build the documentation.
@itemize
-@item Everything listed in @ref{Requirements for running
-LilyPond}
-@item Development packages for the above items (which should
-include header files and libraries).
+@item
+Download and install all the LilyPond build-dependencies (approximately
+200MB);
+
+@example
+sudo apt-get build-dep lilypond
+@end example
+
+@item
+Download and install additional @q{build} tools required for compiling;
+
+@example
+sudo apt-get install autoconf fonts-texgyre texlive-land-cyrillic
+@end example
-Red Hat Fedora:
+@item
+Although not @q{required} to compile LilyPond, if you intend to
+contribute to LilyPond (codebase or help improve the documentation) then
+it is recommended that you also need to install @code{git}.
-@c ghostscript-devel-[version] isn't needed
@example
-guile-devel-@var{version}
-fontconfig-devel-@var{version}
-freetype-devel-@var{version}
-pango-devel-@var{version}
-python-devel-@var{version}
+sudo apt-get install git
@end example
-Debian GNU/Linux:
+Also see @ruser{Starting with Git}.
+
+@item
+To use the @code{lily-git.tcl} GUI;
-@c libgs-dev isn't needed
@example
-guile-@var{version}-dev
-libfontconfig1-dev
-libfreetype6-dev
-libpango1.0-dev
-python@var{version}-dev
+sudo apt-get install tk
@end example
-@item @uref{http://flex.sourceforge.net/, Flex}
+Also see @ruser{lily-git}.
+
+@end itemize
+
+@warning{By default, when building LilyPond's documentation,
+@code{pdfTeX} is be used. However ligatures (fi, fl, ff etc.) may not
+be printed in the PDF output. In this case XeTeX can be used instead.
+Download and install the @code{texlive-xetex} package.
+
+@example
+sudo apt-get install texlive-xetex
+@end example
+
+The scripts used to build the LilyPond documentation will use
+@code{XeTex} instead of @code{pdfTex} to generate the PDF documents if
+it is available. No additional configuration is required.}
+
+
+@node Other
+@unnumberedsubsubsec Other
+
+The following individual software packages are required just to compile
+LilyPond.
+
+@itemize
-@item @uref{http://fontforge.sf.net/, FontForge} (20060125 or
-newer; 20100501 or newer is recommended; must be compiled
-with @option{--enable-double}. Failure to do so can lead to
-poor intersection calculations and poorly-rendered glyphs.)
+@item
+@uref{http://www.gnu.org/software/autoconf, GNU Autoconf}
-@item @uref{http://www.gnu.org/software/bison/, GNU Bison}
+@item
+@uref{http://www.gnu.org/software/bison/, GNU Bison}
-@item @uref{http://gcc.gnu.org/, GNU Compiler Collection} (3.4 or
-newer, 4.@var{x} recommended)
+Use version @code{2.0} or newer.
+
+@item
+@uref{http://gcc.gnu.org/, GNU Compiler Collection}
-@item @uref{http://www.gnu.org/software/gettext/gettext.html, GNU
-gettext} (0.17 or newer)
+Use version @code{3.4} or newer (@code{4.x} recommended).
+
+@item
+@uref{http://flex.sourceforge.net/, Flex}
+
+@item
+@uref{http://fontforge.sf.net/, FontForge}
-@item @uref{http://www.gnu.org/software/make/, GNU Make} (3.78 or
-newer)
+Use version @code{20060125} or newer (we recommend using at least
+@code{20100501}); it must also be compiled with the
+@option{--enable-double} switch, else this can lead to inaccurate
+intersection calculations which end up with poorly-rendered glyphs in
+the output.
+
+@item
+@uref{http://www.gnu.org/software/gettext/gettext.html, GNU gettext}
+
+Use version @code{0.17} or newer.
+
+@item
+@uref{http://www.gnu.org/software/make/, GNU Make}
+
+Use version @code{3.78} or newer.
+
+@item
+@uref{http://metafont.tutorial.free.fr/, MetaFont}
-@item @uref{http://metafont.tutorial.free.fr/, MetaFont}
-(mf-nowin, mf, mfw or mfont binaries), usually packaged with
+The @code{mf-nowin}, @code{mf}, @code{mfw} or @code{mfont} binaries are
+usually packaged along with
@uref{http://www.latex-project.org/ftp.html, @TeX{}}.
-@item @uref{http://cm.bell-labs.com/who/hobby/MetaPost.html,
-MetaPost} (mpost binary), usually packaged with
+@item
+@uref{http://cm.bell-labs.com/who/hobby/MetaPost.html, MetaPost}
+
+The @code{mpost} binary is also usually packaged with
@uref{http://www.latex-project.org/ftp.html, @TeX{}}.
-@item @uref{http://www.perl.org/, Perl}
+@item
+@uref{http://www.perl.org/, Perl}
+
+@item
+@uref{http://www.gnu.org/software/texinfo/, Texinfo}
-@item @uref{http://www.gnu.org/software/texinfo/, Texinfo} (4.11
-or newer)
+Use version @code{4.11} or newer.
+
+@item
+@uref{http://www.lcdf.org/~eddietwo/type/#t1utils, Type 1 utilities}
+
+Use version @code{1.33} or newer.
+
+@item
+@uref{https://www.ctan.org/pkg/cyrillic?lang=en, Cyrillic fonts}
+
+Often packaged in repositories as @code{texlive-lang-cyrillic}.
+
+@item
+TeX Gyre @q{OTF} font packages. As of LilyPond version @code{2.19.26},
+the previous default serif, san serif and monospace fonts now use Tex
+Gyre's @emph{Schola}, @emph{Heros} and @emph{Cursor} fonts respectively.
+Also See @ruser{Fonts}.
+
+Some distributions do not always provide @q{OTF} font files in the Tex
+Gyre packages from their repositories. Use the command
+@code{fc-list | grep texgyre} to list the fonts available to your system
+and check that the appropriate @code{*.otf} files are reported. If they
+are not then download and manually extract the @q{OTF} files to either
+your local @code{~/.fonts/} directory or use the
+@code{configure} command and the
+@code{--with-texgyre-dir=/path_to_otf_files/} option.
+
+The following font families are required:
+
+@uref{http://www.gust.org.pl/projects/e-foundry/tex-gyre/schola, Schola},
+@uref{http://www.gust.org.pl/projects/e-foundry/tex-gyre/heros, Heros}
+and
+@uref{http://www.gust.org.pl/projects/e-foundry/tex-gyre/cursor, Cursor}.
-@item @uref{http://www.lcdf.org/~eddietwo/type/#t1utils, Type 1
-utilities} (1.33 or newer recommended)
@end itemize
+
@node Requirements for building documentation
@subsection Requirements for building documentation
-You can view the documentation online at
-@uref{http://www.lilypond.org/doc/}, but you can also build it
-locally. This process requires some additional tools and
-packages:
+The entire set of documentation for the most current build of LilyPond
+is available online at
+@uref{http://lilypond.org/doc/v2.19/Documentation/web/development}, but
+you can also build them locally from the source code. This process
+requires some additional tools and packages.
+
+@warning{If the instructions for one of the previously listed Linux
+in the previous section (@rcontrib{Requirements for compiling LilyPond})
+have been used, then the following can be ignored as the software should
+already be installed.}
@itemize
-@item Everything listed in @ref{Requirements for compiling
-LilyPond}
-@item @uref{http://www.imagemagick.org/, ImageMagick}
+@item
+Everything listed in @ref{Requirements for compiling LilyPond}
+
+@item
+@uref{http://www.imagemagick.org/, ImageMagick}
-@item @uref{http://netpbm.sourceforge.net/, Netpbm}
+@item
+@uref{http://netpbm.sourceforge.net/, Netpbm}
-@item @uref{http://gzip.org/, gzip}
+@item
+@uref{http://gzip.org/, gzip}
-@item @uref{http://rsync.samba.org/, rsync}
+@item
+@uref{http://rsync.samba.org/, rsync}
-@item @uref{http://www.nongnu.org/texi2html/, Texi2HTML} (1.82)
+@item
+@uref{http://www.nongnu.org/texi2html/, Texi2HTML}
-@item International fonts
+Use version @code{1.82}. Later versions will not work.
-Red Hat Fedora:
+Download @code{texi2html 1.82} directly from:
+@uref{http://download.savannah.gnu.org/releases/texi2html/texi2html-1.82.tar.gz};
+
+Extract the files into an appropriate location and then run the
+commands;
@example
-fonts-arabic
-fonts-hebrew
-fonts-ja
-fonts-xorg-truetype
-taipeifonts
-ttfonts-ja
-ttfonts-zh_CN
+./configure
+make
+sudo make install
@end example
-Debian GNU/Linux:
+Now verify that your operating system is able to see the correct version
+of @code{texi2html}.
@example
-emacs-intl-fonts
-ttf-kochi-gothic
-ttf-kochi-mincho
-xfonts-bolkhov-75dpi
-xfonts-cronyx-75dpi
-xfonts-cronyx-100dpi
-xfonts-intl-.*
+texi2html --version
@end example
+
+@item
+Fonts required to build the documentation in addition to those required
+to run LilyPond:
+
+@example
+gsfonts
+fonts-linuxlibertine
+fonts-liberation
+fonts-dejavu
+fonts-freefont-otf
+ttf-bitstream-vera
+texlive-fonts-recommended
+ttf-xfree86-nonfree
+@end example
+
@end itemize
+@warning{By default, when building LilyPond's documentation,
+@code{pdfTeX} is be used. However ligatures (fi, fl, ff etc.) may not
+be printed in the PDF output. In this case XeTeX can be used instead.
+Download and install the @code{texlive-xetex} package. The scripts used
+to build the LilyPond documentation will use @code{XeTex} instead of
+@code{pdfTex} to generate the PDF documents if it is available. No
+additional configuration is required.}
+
@node Getting the source code
@section Getting the source code
TODO: Describe what @command{make} actually does.
+@seealso
+@ref{Generating documentation} provides more info on the @command{make} targets
+used to build the LilyPond documentation.
+
@node Saving time with the -j option
@subsection Saving time with the @option{-j} option
@end example
@noindent
-or...
+or@dots{}
@example
su -c 'make install'
@example
make [-j@var{X}]
-make [-j@var{X} CPU_COUNT=@var{X}] doc @emph{## can take an hour or more}
+make [-j@var{X} CPU_COUNT=@var{X}] doc @emph{## can take an hour or more}
+make [-j@var{X} CPU_COUNT=@var{X}] doc-stage-1 @emph{## to build only PDF documentation}
@end example
@item
Edit/compile cycle:
@example
-@emph{## edit source files, then...}
+@emph{## edit source files, then@dots{}}
make [-j@var{X}] @emph{## needed if editing outside}
@emph{## Documentation/, but useful anyway}
@emph{## for finding Texinfo errors.}
-touch Documentation/*te?? @emph{## bug workaround}
make [-j@var{X} CPU_COUNT=@var{X}] doc @emph{## usually faster than initial build.}
@end example
@item
Reset:
-In some cases, it is possible to clean the compiled documentation
-with @samp{make@tie{}doc-clean}, but this method is not guaranteed
-to fix everything. Instead, we recommend that you delete your
+It is generally possible to remove the compiled documentation from
+your system
+with @samp{make@tie{}doc-clean}, but this method is not 100%
+guaranteed. Instead, if you want to be sure you have a clean
+system, we recommend that you delete your
@file{build/} directory, and begin compiling from scratch. Since
the documentation compile takes much longer than the
non-documentation compile, this does not increase the overall time
make doc
@end example
-The first time you run @command{make@tie{}doc}, the process can
-easily take an hour or more. After that, @command{make@tie{}doc}
-only makes changes to the pre-built documentation where needed,
-so it may only take a minute or two to test changes if the
-documentation is already built.
+or, to build only the PDF documentation and not the HTML,
+
+@example
+make doc-stage-1
+@end example
+
+@warning{The first time you run @command{make@tie{}doc}, the
+process can easily take an hour or more with not much output
+on the command line.}
+
+After this initial build, @command{make@tie{}doc} only makes
+changes to the documentation where needed, so it may only take
+a minute or two to test changes if the documentation is already
+built.
If @command{make@tie{}doc} succeeds, the HTML documentation tree
is available in @file{out-www/offline-root/}, and can be browsed
in those places; the only complete set of documentation is in
@file{out-www/offline-root/} from the top of the source tree.
-@code{make doc} compiles the documents for all languages. To save
-some compile time, the English language documents can be compiled
-on their own with:
+@command{make@tie{}doc} sends the output from most of the
+compilation to logfiles. If the build fails for any reason, it
+should prompt you with the name of a logfile which will provide
+information to help you work out why the build failed. These
+logfiles are not deleted with @command{make@tie{}doc-clean}. To
+remove all the logfiles generated by the compilation process, use:
@example
-make LANGS='' doc
+make log-clean
@end example
-Compilation of documentation in Info format with images can be
-done separately by issuing:
+@code{make@tie{}doc} compiles the documents for all languages. To
+save some compile time, the English language documents can be
+compiled on their own with:
@example
-make info
+make LANGS='' doc
@end example
-@knownissues
-
-If source files have changed since the last documentation build,
-output files that need to be rebuilt are normally rebuilt, even if
-you do not run @code{make@tie{}doc-clean} first. However, build
-dependencies in the documentation are so complex that some
-newly-edited files may not be rebuilt as they should be; a
-workaround is to @command{touch} the top source file for any
-manual you've edited. For example, if you make changes to a file
-in @file{notation/}, do:
+@noindent Similarly, it is possible to compile a subset of the
+translated documentation by specifying their language codes on the
+command line. For example, the French and German translations are
+compiled with:
@example
-touch Documentation/notation.tely
+make LANGS='de fr' doc
@end example
-@noindent
-The top sources possibly affected by this are:
+@noindent Note that this will also compile the English version.
+
+Compilation of documentation in Info format with images can be
+done separately by issuing:
@example
-Documentation/extend.texi
-Documentation/changes.tely
-Documentation/contributor.texi
-Documentation/essay.tely
-Documentation/extending.tely
-Documentation/learning.tely
-Documentation/notation.tely
-Documentation/snippets.tely
-Documentation/usage.tely
-Documentation/web.texi
+make info
@end example
@noindent
-You can @command{touch} all of them at once with:
+An issue when switching branches between master and translation
+is the appearance/disappearance of translated versions of some manuals.
+If you see such a warning from make:
@example
-touch Documentation/*te??
+No rule to make target `X', needed by `Y'
@end example
@noindent
-However, this will rebuild all of the manuals
-indiscriminately---it is more efficient to @command{touch} only
-the affected files.
+Your best bet is to delete the file Y.dep and to try again.
@node Building a single document
@unnumberedsubsubsec Building a single document
Bugs that are not fault of LilyPond are documented here.
-@unnumberedsubsubsec Bison 1.875
-
-There is a bug in bison-1.875: compilation fails with "parse error
-before `goto'" in line 4922 due to a bug in bison. To fix, please
-recompile bison 1.875 with the following fix
-
-@example
-$ cd lily; make out/parser.cc
-$ vi +4919 out/parser.cc
-# append a semicolon to the line containing "__attribute__ ((__unused__))
-# save
-$ make
-@end example
-
-@unnumberedsubsubsec Compiling on MacOS@tie{}X
+@unnumberedsubsec Compiling on MacOS@tie{}X
Here are special instructions for compiling under MacOS@tie{}X.
These instructions assume that dependencies are installed using
automatic font detection, add
@example
---with-ncsb-dir=/opt/local/share/ghostscript/fonts
+--with-fonts-dir=/opt/local/share/ghostscript/fonts
@end example
-@unnumberedsubsubsec Solaris
+@unnumberedsubsec Solaris
Solaris7, ./configure
CONFIG_SHELL=/bin/bash bash -c ./configure
@end example
-@unnumberedsubsubsec FreeBSD
+@unnumberedsubsec FreeBSD
To use system fonts, dejaview must be installed. With the default
port, the fonts are installed in @file{usr/X11R6/lib/X11/fonts/dejavu}.
@end example
-@unnumberedsubsubsec International fonts
+@unnumberedsubsec International fonts
On Mac OS X, all fonts are installed by default. However, finding all
system fonts requires a bit of configuration; see
Debian GNU/Linux
apt-get install emacs-intl-fonts xfonts-intl-.* \
- ttf-kochi-gothic ttf-kochi-mincho \
+ fonts-ipafont-gothic fonts-ipafont-mincho \
xfonts-bolkhov-75dpi xfonts-cronyx-100dpi xfonts-cronyx-75dpi
@end verbatim
-@unnumberedsubsubsec Using lilypond python libraries
+@unnumberedsubsec Using lilypond python libraries
If you want to use lilypond's python libraries (either running
certain build scripts manually, or using them in other programs),
set @code{PYTHONPATH} to @file{python/out} in your build
-directory, or @file{.../usr/lib/lilypond/current/python} in the
+directory, or @file{@dots{}/usr/lib/lilypond/current/python} in the
installation directory structure.
used by us. Hopefully this will change in the future.
-@subsubheading Version-specific texinfo macros
+@subheading Version-specific texinfo macros
@itemize
projects / lilypond.git / blobdiff