% texinfo.tex -- TeX macros to handle Texinfo files.
-%
+%
% Load plain if necessary, i.e., if running under initex.
\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
%
-\def\texinfoversion{2008-11-07.12}
+\def\texinfoversion{2009-08-14.15}
%
-% Copyright (C) 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
+% Copyright 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
-% 2007, 2008 Free Software Foundation, Inc.
+% 2007, 2008, 2009 Free Software Foundation, Inc.
%
% This texinfo.tex file is free software: you can redistribute it and/or
% modify it under the terms of the GNU General Public License as
\let\ptexstar=\*
\let\ptext=\t
\let\ptextop=\top
+{\catcode`\'=\active
+\global\let\ptexquoteright'}% Math-mode def from plain.tex.
+\let\ptexraggedright=\raggedright
% If this character appears in an error message or help string, it
% starts a new line in the output.
% We don't want .vr (or whatever) entries like this:
% \entry{{\tt \indexbackslash }acronym}{32}{\code {\acronym}}
% "\acronym" won't work when it's read back in;
- % it needs to be
+ % it needs to be
% {\code {{\tt \backslashcurfont }acronym}
\shipout\vbox{%
% Do this early so pdf references go to the beginning of the page.
\def\?{?\spacefactor=\endofsentencespacefactor\space}
% @frenchspacing on|off says whether to put extra space after punctuation.
-%
+%
\def\onword{on}
\def\offword{off}
%
\catcode`>=\other
\catcode`+=\other
\catcode`-=\other
+ \catcode`\`=\other
+ \catcode`\'=\other
}
\def\pushthisfilestack{%
\catcode`< = \active
\catcode`> = \active
\catcode`+ = \active
+ \catcode`' = \active
\gdef\mathactive{%
\let^ = \ptexhat
\let< = \ptexless
\let> = \ptexgtr
\let+ = \ptexplus
+ \let' = \ptexquoteright
}
}
% that's what we do).
% double active backslashes.
-%
+%
{\catcode`\@=0 \catcode`\\=\active
@gdef@activebackslashdouble{%
@catcode`@\=@active
% us) handles it with this amazing macro to replace tokens, with minor
% changes for Texinfo. It is included here under the GPL by permission
% from the author, Heiko Oberdiek.
-%
+%
% #1 is the tokens to replace.
% #2 is the replacement.
% #3 is the control sequence with the string.
-%
+%
\def\HyPsdSubst#1#2#3{%
\def\HyPsdReplace##1#1##2\END{%
##1%
\ifpdf
%
- % Color manipulation macros based on pdfcolor.tex.
- \def\cmykDarkRed{0.28 1 1 0.35}
- \def\cmykBlack{0 0 0 1}
+ % Color manipulation macros based on pdfcolor.tex,
+ % except using rgb instead of cmyk; the latter is said to render as a
+ % very dark gray on-screen and a very dark halftone in print, instead
+ % of actual black.
+ \def\rgbDarkRed{0.50 0.09 0.12}
+ \def\rgbBlack{0 0 0}
+ %
+ % k sets the color for filling (usual text, etc.);
+ % K sets the color for stroking (thin rules, e.g., normal _'s).
+ \def\pdfsetcolor#1{\pdfliteral{#1 rg #1 RG}}
%
- \def\pdfsetcolor#1{\pdfliteral{#1 k}}
% Set color, and create a mark which defines \thiscolor accordingly,
% so that \makeheadline knows which color to restore.
\def\setcolor#1{%
\pdfsetcolor{#1}%
}
%
- \def\maincolor{\cmykBlack}
+ \def\maincolor{\rgbBlack}
\pdfsetcolor{\maincolor}
\edef\thiscolor{\maincolor}
\def\lastcolordefs{}
%
% by default, use a color that is dark enough to print on paper as
% nearly black, but still distinguishable for online viewing.
- \def\urlcolor{\cmykDarkRed}
- \def\linkcolor{\cmykDarkRed}
+ \def\urlcolor{\rgbDarkRed}
+ \def\linkcolor{\rgbDarkRed}
\def\endlink{\setcolor{\maincolor}\pdfendlink}
%
% Adding outlines to PDF; macros for calculating structure of outlines
% tried to figure out what each command should do in the context
% of @url. for now, just make @/ a no-op, that's the only one
% people have actually reported a problem with.
- %
+ %
\normalturnoffactive
\def\@{@}%
\let\/=\empty
\makevalueexpandable
+ % do we want to go so far as to use \indexnofonts instead of just
+ % special-casing \var here?
+ \def\var##1{##1}%
+ %
\leavevmode\setcolor{\urlcolor}%
\startlink attr{/Border [0 0 0]}%
user{/Subtype /Link /A << /S /URI /URI (#1) >>}%
\setcolor{\linkcolor}#1\endlink}
\def\done{\edef\st{\global\noexpand\toksA={\the\toksB}}\st}
\else
+ % non-pdf mode
\let\pdfmkdest = \gobble
\let\pdfurl = \gobble
\let\endlink = \relax
\def\bf{\fam=\bffam \setfontstyle{bf}}\def\bfstylename{bf}
\def\tt{\fam=\ttfam \setfontstyle{tt}}
+% Unfortunately, we have to override this for titles and the like, since
+% in those cases "rm" is bold. Sigh.
+\def\rmisbold{\rm\def\curfontstyle{bf}}
+
% Texinfo sort of supports the sans serif font style, which plain TeX does not.
% So we set up a \sf.
\newfam\sffam
% Definitions for a main text size of 11pt. This is the default in
% Texinfo.
-%
+%
\def\definetextfontsizexi{%
% Text fonts (11.2pt, magstep1).
\def\textnominalsize{11pt}
\setfont\titlesc\scbshape{10}{\magstep4}{OT1}
\font\titlei=cmmi12 scaled \magstep3
\font\titlesy=cmsy10 scaled \magstep4
-\def\authorrm{\secrm}
-\def\authortt{\sectt}
\def\titleecsize{2074}
% Chapter (and unnumbered) fonts (17.28pt).
% section, chapter, etc., sizes following suit. This is for the GNU
% Press printing of the Emacs 22 manual. Maybe other manuals in the
% future. Used with @smallbook, which sets the leading to 12pt.
-%
+%
\def\definetextfontsizex{%
% Text fonts (10pt).
\def\textnominalsize{10pt}
\setfont\titlesc\scbshape{10}{\magstep4}{OT1}
\font\titlei=cmmi12 scaled \magstep3
\font\titlesy=cmsy10 scaled \magstep4
-\def\authorrm{\secrm}
-\def\authortt{\sectt}
\def\titleecsize{2074}
% Chapter fonts (14.4pt).
\setfont\secsf\sfbshape{12}{1000}{OT1}
\let\secbf\secrm
\setfont\secsc\scbshape{10}{\magstep1}{OT1}
-\font\seci=cmmi12
+\font\seci=cmmi12
\font\secsy=cmsy10 scaled \magstep1
\def\sececsize{1200}
% We provide the user-level command
% @fonttextsize 10
% (or 11) to redefine the text font size. pt is assumed.
-%
+%
\def\xword{10}
\def\xiword{11}
%
%
% Set \globaldefs so that documents can use this inside @tex, since
% makeinfo 4.8 does not support it, but we need it nonetheless.
- %
+ %
\begingroup \globaldefs=1
\ifx\textsizearg\xword \definetextfontsizex
\else \ifx\textsizearg\xiword \definetextfontsizexi
\def\curfontsize{title}%
\def\lsize{chap}\def\lllsize{subsec}%
\resetmathfonts \setleading{25pt}}
-\def\titlefont#1{{\titlefonts\rm #1}}
+\def\titlefont#1{{\titlefonts\rmisbold #1}}
\def\chapfonts{%
\let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl
\let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc
\def\lsize{smaller}\def\lllsize{smaller}%
\resetmathfonts \setleading{9.5pt}}
+% Fonts for short table of contents.
+\setfont\shortcontrm\rmshape{12}{1000}{OT1}
+\setfont\shortcontbf\bfshape{10}{\magstep1}{OT1} % no cmb12
+\setfont\shortcontsl\slshape{12}{1000}{OT1}
+\setfont\shortconttt\ttshape{12}{1000}{OT1TT}
+
+% Define these just so they can be easily changed for other fonts.
+\def\angleleft{$\langle$}
+\def\angleright{$\rangle$}
+
% Set the fonts to use with the @small... environments.
\let\smallexamplefonts = \smallfonts
%
% By the way, for comparison, here's what fits with @example (10pt):
% 8.5x11=71 smallbook=60 a4=75 a5=58
-%
-% I wish the USA used A4 paper.
% --karl, 24jan03.
-
% Set up the default fonts, so we can use them for creating boxes.
%
\definetextfontsizexi
-% Define these so they can be easily changed for other fonts.
-\def\angleleft{$\langle$}
-\def\angleright{$\rangle$}
+
+\message{markup,}
+
+% Check if we are currently using a typewriter font. Since all the
+% Computer Modern typewriter fonts have zero interword stretch (and
+% shrink), and it is reasonable to expect all typewriter fonts to have
+% this property, we can check that font parameter.
+%
+\def\ifmonospace{\ifdim\fontdimen3\font=0pt }
+
+% Markup style infrastructure. \defmarkupstylesetup\INITMACRO will
+% define and register \INITMACRO to be called on markup style changes.
+% \INITMACRO can check \currentmarkupstyle for the innermost
+% style and the set of \ifmarkupSTYLE switches for all styles
+% currently in effect.
+\newif\ifmarkupvar
+\newif\ifmarkupsamp
+\newif\ifmarkupkey
+%\newif\ifmarkupfile % @file == @samp.
+%\newif\ifmarkupoption % @option == @samp.
+\newif\ifmarkupcode
+\newif\ifmarkupkbd
+%\newif\ifmarkupenv % @env == @code.
+%\newif\ifmarkupcommand % @command == @code.
+\newif\ifmarkuptex % @tex (and part of @math, for now).
+\newif\ifmarkupexample
+\newif\ifmarkupverb
+\newif\ifmarkupverbatim
+
+\let\currentmarkupstyle\empty
+
+\def\setupmarkupstyle#1{%
+ \csname markup#1true\endcsname
+ \def\currentmarkupstyle{#1}%
+ \markupstylesetup
+}
+
+\let\markupstylesetup\empty
+
+\def\defmarkupstylesetup#1{%
+ \expandafter\def\expandafter\markupstylesetup
+ \expandafter{\markupstylesetup #1}%
+ \def#1%
+}
+
+% Markup style setup for left and right quotes.
+\defmarkupstylesetup\markupsetuplq{%
+ \expandafter\let\expandafter \temp \csname markupsetuplq\currentmarkupstyle\endcsname
+ \ifx\temp\relax \markupsetuplqdefault \else \temp \fi
+}
+
+\defmarkupstylesetup\markupsetuprq{%
+ \expandafter\let\expandafter \temp \csname markupsetuprq\currentmarkupstyle\endcsname
+ \ifx\temp\relax \markupsetuprqdefault \else \temp \fi
+}
+
+{
+\catcode`\'=\active
+\catcode`\`=\active
+
+\gdef\markupsetuplqdefault{\let`\lq}
+\gdef\markupsetuprqdefault{\let'\rq}
+
+\gdef\markupsetcodequoteleft{\let`\codequoteleft}
+\gdef\markupsetcodequoteright{\let'\codequoteright}
+
+\gdef\markupsetnoligaturesquoteleft{\let`\noligaturesquoteleft}
+}
+
+\let\markupsetuplqcode \markupsetcodequoteleft
+\let\markupsetuprqcode \markupsetcodequoteright
+\let\markupsetuplqexample \markupsetcodequoteleft
+\let\markupsetuprqexample \markupsetcodequoteright
+\let\markupsetuplqverb \markupsetcodequoteleft
+\let\markupsetuprqverb \markupsetcodequoteright
+\let\markupsetuplqverbatim \markupsetcodequoteleft
+\let\markupsetuprqverbatim \markupsetcodequoteright
+
+\let\markupsetuplqsamp \markupsetnoligaturesquoteleft
+\let\markupsetuplqkbd \markupsetnoligaturesquoteleft
+
+% Allow an option to not replace quotes with a regular directed right
+% quote/apostrophe (char 0x27), but instead use the undirected quote
+% from cmtt (char 0x0d). The undirected quote is ugly, so don't make it
+% the default, but it works for pasting with more pdf viewers (at least
+% evince), the lilypond developers report. xpdf does work with the
+% regular 0x27.
+%
+\def\codequoteright{%
+ \expandafter\ifx\csname SETtxicodequoteundirected\endcsname\relax
+ \expandafter\ifx\csname SETcodequoteundirected\endcsname\relax
+ '%
+ \else \char'15 \fi
+ \else \char'15 \fi
+}
+%
+% and a similar option for the left quote char vs. a grave accent.
+% Modern fonts display ASCII 0x60 as a grave accent, so some people like
+% the code environments to do likewise.
+%
+\def\codequoteleft{%
+ \expandafter\ifx\csname SETtxicodequotebacktick\endcsname\relax
+ \expandafter\ifx\csname SETcodequotebacktick\endcsname\relax
+ % [Knuth] pp. 380,381,391
+ % \relax disables Spanish ligatures ?` and !` of \tt font.
+ \relax`%
+ \else \char'22 \fi
+ \else \char'22 \fi
+}
+
+% [Knuth] pp. 380,381,391, disable Spanish ligatures ?` and !` of \tt font.
+\def\noligaturesquoteleft{\relax\lq}
% Count depth in font-changes, for error checks
\newcount\fontdepth \fontdepth=0
-% Fonts for short table of contents.
-\setfont\shortcontrm\rmshape{12}{1000}{OT1}
-\setfont\shortcontbf\bfshape{10}{\magstep1}{OT1} % no cmb12
-\setfont\shortcontsl\slshape{12}{1000}{OT1}
-\setfont\shortconttt\ttshape{12}{1000}{OT1TT}
-
%% Add scribe-like font environments, plus @l for inline lisp (usually sans
%% serif) and @ii for TeX italic
% @var is set to this for defun arguments.
\def\ttslanted#1{{\ttsl #1}\futurelet\next\smartitalicx}
-% like \smartslanted except unconditionally use \sl. We never want
+% @cite is like \smartslanted except unconditionally use \sl. We never want
% ttsl for book titles, do we?
\def\cite#1{{\sl #1}\futurelet\next\smartitalicx}
\let\i=\smartitalic
\let\slanted=\smartslanted
-\let\var=\smartslanted
+\def\var#1{{\setupmarkupstyle{var}\smartslanted{#1}}}
\let\dfn=\smartslanted
\let\emph=\smartitalic
-% @b, explicit bold.
+% Explicit font changes: @r, @sc, undocumented @ii.
+\def\r#1{{\rm #1}} % roman font
+\def\sc#1{{\smallcaps#1}} % smallcaps font
+\def\ii#1{{\it #1}} % italic font
+
+% @b, explicit bold. Also @strong.
\def\b#1{{\bf #1}}
\let\strong=\b
\catcode`@=\other
\def\endofsentencespacefactor{3000}% default
+% @t, explicit typewriter.
\def\t#1{%
{\tt \rawbackslash \plainfrenchspacing #1}%
\null
}
-\def\samp#1{`\tclose{#1}'\null}
-\setfont\keyrm\rmshape{8}{1000}{OT1}
-\font\keysy=cmsy9
-\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{%
- \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{%
- \vbox{\hrule\kern-0.4pt
- \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}%
- \kern-0.4pt\hrule}%
- \kern-.06em\raise0.4pt\hbox{\angleright}}}}
-\def\key #1{{\nohyphenation \uppercase{#1}}\null}
-% The old definition, with no lozenge:
-%\def\key #1{{\ttsl \nohyphenation \uppercase{#1}}\null}
+
+% @samp.
+\def\samp#1{{\setupmarkupstyle{samp}\lq\tclose{#1}\rq\null}}
+
+% definition of @key that produces a lozenge. Doesn't adjust to text size.
+%\setfont\keyrm\rmshape{8}{1000}{OT1}
+%\font\keysy=cmsy9
+%\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{%
+% \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{%
+% \vbox{\hrule\kern-0.4pt
+% \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}%
+% \kern-0.4pt\hrule}%
+% \kern-.06em\raise0.4pt\hbox{\angleright}}}}
+
+% definition of @key with no lozenge. If the current font is already
+% monospace, don't change it; that way, we respect @kbdinputstyle. But
+% if it isn't monospace, then use \tt.
+%
+\def\key#1{{\setupmarkupstyle{key}%
+ \nohyphenation
+ \ifmonospace\else\tt\fi
+ #1}\null}
+
+% ctrl is no longer a Texinfo command.
\def\ctrl #1{{\tt \rawbackslash \hat}#1}
% @file, @option are the same as @samp.
\global\let'=\rq \global\let`=\lq % default definitions
%
\global\def\code{\begingroup
- \catcode\rquoteChar=\active \catcode\lquoteChar=\active
- \let'\codequoteright \let`\codequoteleft
- %
+ \setupmarkupstyle{code}%
+ % The following should really be moved into \setupmarkupstyle handlers.
\catcode\dashChar=\active \catcode\underChar=\active
\ifallowcodebreaks
\let-\codedash
% each of the four underscores in __typeof__. This is undesirable in
% some manuals, especially if they don't have long identifiers in
% general. @allowcodebreaks provides a way to control this.
-%
+%
\newif\ifallowcodebreaks \allowcodebreakstrue
\def\keywordtrue{true}
% @kbd is like @code, except that if the argument is just one @key command,
% then @kbd has no effect.
+\def\kbd#1{{\setupmarkupstyle{kbd}\def\look{#1}\expandafter\kbdfoo\look??\par}}
% @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always),
% `example' (@kbd uses ttsl only inside of @example and friends),
\def\wordexample{example}
\def\wordcode{code}
-% Default is `distinct.'
+% Default is `distinct'.
\kbdinputstyle distinct
\def\xkey{\key}
\def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}%
\ifx\one\xkey\ifx\threex\three \key{#2}%
-\else{\tclose{\kbdfont\look}}\fi
-\else{\tclose{\kbdfont\look}}\fi}
+\else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi
+\else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi}
% For @indicateurl, @env, @command quotes seem unnecessary, so use \code.
\let\indicateurl=\code
\let\email=\uref
\fi
-% Check if we are currently using a typewriter font. Since all the
-% Computer Modern typewriter fonts have zero interword stretch (and
-% shrink), and it is reasonable to expect all typewriter fonts to have
-% this property, we can check that font parameter.
-%
-\def\ifmonospace{\ifdim\fontdimen3\font=0pt }
-
% Typeset a dimension, e.g., `in' or `pt'. The only reason for the
% argument is to make the input look right: @dmn{pt} instead of @dmn{}pt.
%
\def\dmn#1{\thinspace #1}
-\def\kbd#1{\def\look{#1}\expandafter\kbdfoo\look??\par}
-
% @l was never documented to mean ``switch to the Lisp font'',
% and it is not used as such in any manual I can find. We need it for
% Polish suppressed-l. --karl, 22sep96.
%\def\l#1{{\li #1}\null}
-% Explicit font changes: @r, @sc, undocumented @ii.
-\def\r#1{{\rm #1}} % roman font
-\def\sc#1{{\smallcaps#1}} % smallcaps font
-\def\ii#1{{\it #1}} % italic font
-
% @acronym for "FBI", "NATO", and the like.
% We print this one point size smaller, since it's intended for
% all-uppercase.
-%
+%
\def\acronym#1{\doacronym #1,,\finish}
\def\doacronym#1,#2,#3\finish{%
{\selectfonts\lsize #1}%
% @abbr for "Comput. J." and the like.
% No font change, but don't do end-of-sentence spacing.
-%
+%
\def\abbr#1{\doabbr #1,,\finish}
\def\doabbr#1,#2,#3\finish{%
{\plainfrenchspacing #1}%
\fi
}
+
+\message{glyphs,}
+
+% @point{}, @result{}, @expansion{}, @print{}, @equiv{}.
+%
+% Since these characters are used in examples, they should be an even number of
+% \tt widths. Each \tt character is 1en, so two makes it 1em.
+%
+\def\point{$\star$}
+\def\arrow{\leavevmode\raise.05ex\hbox to 1em{\hfil$\rightarrow$\hfil}}
+\def\result{\leavevmode\raise.05ex\hbox to 1em{\hfil$\Rightarrow$\hfil}}
+\def\expansion{\leavevmode\hbox to 1em{\hfil$\mapsto$\hfil}}
+\def\print{\leavevmode\lower.1ex\hbox to 1em{\hfil$\dashv$\hfil}}
+\def\equiv{\leavevmode\hbox to 1em{\hfil$\ptexequiv$\hfil}}
+
+% The @error{} command.
+% Adapted from the TeXbook's \boxit.
+%
+\newbox\errorbox
+%
+{\tentt \global\dimen0 = 3em}% Width of the box.
+\dimen2 = .55pt % Thickness of rules
+% The text. (`r' is open on the right, `e' somewhat less so on the left.)
+\setbox0 = \hbox{\kern-.75pt \reducedsf error\kern-1.5pt}
+%
+\setbox\errorbox=\hbox to \dimen0{\hfil
+ \hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right.
+ \advance\hsize by -2\dimen2 % Rules.
+ \vbox{%
+ \hrule height\dimen2
+ \hbox{\vrule width\dimen2 \kern3pt % Space to left of text.
+ \vtop{\kern2.4pt \box0 \kern2.4pt}% Space above/below.
+ \kern3pt\vrule width\dimen2}% Space to right.
+ \hrule height\dimen2}
+ \hfil}
+%
+\def\error{\leavevmode\lower.7ex\copy\errorbox}
+
% @pounds{} is a sterling sign, which Knuth put in the CM italic font.
%
\def\pounds{{\it\$}}
% Theiling, which support regular, slanted, bold and bold slanted (and
% "outlined" (blackboard board, sort of) versions, which we don't need).
% It is available from http://www.ctan.org/tex-archive/fonts/eurosym.
-%
+%
% Although only regular is the truly official Euro symbol, we ignore
% that. The Euro is designed to be slightly taller than the regular
% font height.
-%
+%
% feymr - regular
% feymo - slanted
% feybr - bold
% feybo - bold slanted
-%
+%
% There is no good (free) typewriter version, to my knowledge.
% A feymr10 euro is ~7.3pt wide, while a normal cmtt10 char is ~5.25pt wide.
% Hmm.
-%
+%
% Also doesn't work in math. Do we need to do math with euro symbols?
% Hope not.
-%
-%
+%
+%
\def\euro{{\eurofont e}}
\def\eurofont{%
% We set the font at each command, rather than predefining it in
% \textfonts and the other font-switching commands, so that
% installations which never need the symbol don't have to have the
% font installed.
- %
+ %
% There is only one designed size (nominal 10pt), so we always scale
% that to the current nominal size.
- %
+ %
% By the way, simply using "at 1em" works for cmr10 and the like, but
% does not work for cmbx10 and other extended/shrunken fonts.
- %
+ %
\def\eurosize{\csname\curfontsize nominalsize\endcsname}%
%
- \ifx\curfontstyle\bfstylename
+ \ifx\curfontstyle\bfstylename
% bold:
\font\thiseurofont = \ifusingit{feybo10}{feybr10} at \eurosize
- \else
+ \else
% regular:
\font\thiseurofont = \ifusingit{feymo10}{feymr10} at \eurosize
\fi
\thiseurofont
}
-% Hacks for glyphs from the EC fonts similar to \euro. We don't
-% use \let for the aliases, because sometimes we redefine the original
-% macro, and the alias should reflect the redefinition.
+% Glyphs from the EC fonts. We don't use \let for the aliases, because
+% sometimes we redefine the original macro, and the alias should reflect
+% the redefinition.
+%
+% Use LaTeX names for the Icelandic letters.
+\def\DH{{\ecfont \char"D0}} % Eth
+\def\dh{{\ecfont \char"F0}} % eth
+\def\TH{{\ecfont \char"DE}} % Thorn
+\def\th{{\ecfont \char"FE}} % thorn
+%
\def\guillemetleft{{\ecfont \char"13}}
\def\guillemotleft{\guillemetleft}
\def\guillemetright{{\ecfont \char"14}}
\def\quotesinglbase{{\ecfont \char"0D}}
%
% This positioning is not perfect (see the ogonek LaTeX package), but
-% we have the precomposed glyphs for the most common cases.
+% we have the precomposed glyphs for the most common cases. We put the
+% tests to use those glyphs in the single \ogonek macro so we have fewer
+% dummy definitions to worry about for index entries, etc.
+%
% ogonek is also used with other letters in Lithuanian (IOU), but using
% the precomposed glyphs for those is not so easy since they aren't in
% the same EC font.
-\def\ogonek#1{{\ecfont \setbox0=\hbox{#1}\ifdim\ht0=1ex\accent"0C #1%
- \else\ooalign{\unhbox0\crcr\hidewidth\char"0C \hidewidth}\fi}}
-\def\Aogonek{{\ecfont \char"81}}
-\def\Eogonek{{\ecfont \char"86}}
-\def\aogonek{{\ecfont \char"A1}}
-\def\eogonek{{\ecfont \char"A6}}
+\def\ogonek#1{{%
+ \def\temp{#1}%
+ \ifx\temp\macrocharA\Aogonek
+ \else\ifx\temp\macrochara\aogonek
+ \else\ifx\temp\macrocharE\Eogonek
+ \else\ifx\temp\macrochare\eogonek
+ \else
+ \ecfont \setbox0=\hbox{#1}%
+ \ifdim\ht0=1ex\accent"0C #1%
+ \else\ooalign{\unhbox0\crcr\hidewidth\char"0C \hidewidth}%
+ \fi
+ \fi\fi\fi\fi
+ }%
+}
+\def\Aogonek{{\ecfont \char"81}}\def\macrocharA{A}
+\def\aogonek{{\ecfont \char"A1}}\def\macrochara{a}
+\def\Eogonek{{\ecfont \char"86}}\def\macrocharE{E}
+\def\eogonek{{\ecfont \char"A6}}\def\macrochare{e}
%
+% Use the ec* fonts (cm-super in outline format) for non-CM glyphs.
\def\ecfont{%
% We can't distinguish serif/sans and italic/slanted, but this
% is used for crude hacks anyway (like adding French and German
% Laurent Siebenmann reports \Orb undefined with:
% Textures 1.7.7 (preloaded format=plain 93.10.14) (68K) 16 APR 2004 02:38
% so we'll define it if necessary.
-%
+%
\ifx\Orb\undefined
\def\Orb{\mathhexbox20D}
\fi
\let\subtitlerm=\tenrm
\def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines}
-\def\authorfont{\authorrm \normalbaselineskip = 16pt \normalbaselines
- \let\tt=\authortt}
-
\parseargdef\title{%
\checkenv\titlepage
- \leftline{\titlefonts\rm #1}
+ \leftline{\titlefonts\rmisbold #1}
% print a rule at the page bottom also.
\finishedtitlepagefalse
\vskip4pt \hrule height 4pt width \hsize \vskip4pt
\else
\checkenv\titlepage
\ifseenauthor\else \vskip 0pt plus 1filll \seenauthortrue \fi
- {\authorfont \leftline{#1}}%
+ {\secfonts\rmisbold \leftline{#1}}%
\fi
}
% cause the example and the item to crash together. So we use this
% bizarre value of 10001 as a signal to \aboveenvbreak to insert
% \parskip glue after all. Section titles are handled this way also.
- %
+ %
\penalty 10001
\endgroup
\itemxneedsnegativevskipfalse
\parindent=0pt
\parskip=\smallskipamount
\ifdim\parskip=0pt \parskip=2pt \fi
+ %
+ % Try typesetting the item mark that if the document erroneously says
+ % something like @itemize @samp (intending @table), there's an error
+ % right away at the @itemize. It's not the best error message in the
+ % world, but it's better than leaving it to the @item. This means if
+ % the user wants an empty mark, they have to say @w{} not just @w.
\def\itemcontents{#1}%
+ \setbox0 = \hbox{\itemcontents}%
+ %
% @itemize with no arg is equivalent to @itemize @bullet.
\ifx\itemcontents\empty\def\itemcontents{\bullet}\fi
+ %
\let\item=\itemizeitem
}
\ifnum\lastpenalty<10000 \parskip=0in \fi
\noindent
\hbox to 0pt{\hss \itemcontents \kern\itemmargin}%
+ %
\vadjust{\penalty 1200}}% not good to break after first line of item.
\flushcr
}
%
% @headitem starts a heading row, which we typeset in bold.
% Assignments have to be global since we are inside the implicit group
-% of an alignment entry. Note that \everycr resets \everytab.
-\def\headitem{\checkenv\multitable \crcr \global\everytab={\bf}\the\everytab}%
+% of an alignment entry. \everycr resets \everytab so we don't have to
+% undo it ourselves.
+\def\headitemfont{\b}% for people to use in the template row; not changeable
+\def\headitem{%
+ \checkenv\multitable
+ \crcr
+ \global\everytab={\bf}% can't use \headitemfont since the parsing differs
+ \the\everytab % for the first item
+}%
%
% A \tab used to include \hskip1sp. But then the space in a template
% line is not enough. That is bad. So let's go back to just `&' until
-% we encounter the problem it was intended to solve again.
+% we again encounter the problem the 1sp was intended to solve.
% --karl, nathan@acm.org, 20apr99.
\def\tab{\checkenv\multitable &\the\everytab}%
% processing continues to some further point. On the other hand, it
% seems \endinput does not hurt in the printed index arg, since that
% is still getting written without apparent harm.
- %
+ %
% Sample source (mac-idx3.tex, reported by Graham Percival to
% help-texinfo, 22may06):
% @macro funindex {WORD}
% @end macro
% ...
% @funindex commtest
- %
+ %
% The above is not enough to reproduce the bug, but it gives the flavor.
- %
+ %
% Sample whatsit resulting:
% .@write3{\entry{xyz}{@folio }{@code {xyz@endinput }}}
- %
+ %
% So:
\let\endinput = \empty
%
% Non-English letters.
\definedummyword\AA
\definedummyword\AE
+ \definedummyword\DH
\definedummyword\L
- \definedummyword\OE
\definedummyword\O
+ \definedummyword\OE
+ \definedummyword\TH
\definedummyword\aa
\definedummyword\ae
+ \definedummyword\dh
+ \definedummyword\exclamdown
\definedummyword\l
- \definedummyword\oe
\definedummyword\o
- \definedummyword\ss
- \definedummyword\exclamdown
- \definedummyword\questiondown
+ \definedummyword\oe
\definedummyword\ordf
\definedummyword\ordm
+ \definedummyword\questiondown
+ \definedummyword\ss
+ \definedummyword\th
%
% Although these internal commands shouldn't show up, sometimes they do.
\definedummyword\bf
\definedummyword\guilsinglright
\definedummyword\expansion
\definedummyword\minus
+ \definedummyword\ogonek
\definedummyword\pounds
\definedummyword\point
\definedummyword\print
\definedummyword\v
\definedummyword\H
\definedummyword\dotaccent
+ \definedummyword\ogonek
\definedummyword\ringaccent
\definedummyword\tieaccent
\definedummyword\ubaraccent
\definedummyword\code
\definedummyword\command
\definedummyword\dfn
+ \definedummyword\email
\definedummyword\emph
\definedummyword\env
\definedummyword\file
% Non-English letters.
\def\AA{AA}%
\def\AE{AE}%
+ \def\DH{DZZ}%
\def\L{L}%
\def\OE{OE}%
\def\O{O}%
+ \def\TH{ZZZ}%
\def\aa{aa}%
\def\ae{ae}%
+ \def\dh{dzz}%
+ \def\exclamdown{!}%
\def\l{l}%
\def\oe{oe}%
- \def\o{o}%
- \def\ss{ss}%
- \def\exclamdown{!}%
- \def\questiondown{?}%
\def\ordf{a}%
\def\ordm{o}%
+ \def\o{o}%
+ \def\questiondown{?}%
+ \def\ss{ss}%
+ \def\th{zzz}%
%
\def\LaTeX{LaTeX}%
\def\TeX{TeX}%
\def\bullet{bullet}%
\def\comma{,}%
\def\copyright{copyright}%
- \def\registeredsymbol{R}%
\def\dots{...}%
\def\enddots{...}%
\def\equiv{==}%
\def\error{error}%
\def\euro{euro}%
+ \def\expansion{==>}%
\def\guillemetleft{<<}%
\def\guillemetright{>>}%
\def\guilsinglleft{<}%
\def\guilsinglright{>}%
- \def\expansion{==>}%
\def\minus{-}%
- \def\pounds{pounds}%
\def\point{.}%
+ \def\pounds{pounds}%
\def\print{-|}%
\def\quotedblbase{"}%
\def\quotedblleft{"}%
\def\quoteleft{`}%
\def\quoteright{'}%
\def\quotesinglbase{,}%
+ \def\registeredsymbol{R}%
\def\result{=>}%
- \def\textdegree{degrees}%
+ \def\textdegree{o}%
%
% We need to get rid of all macros, leaving only the arguments (if present).
% Of course this is not nearly correct, but it is the best we can do for now.
% makeinfo does not expand macros in the argument to @deffn, which ends up
% writing an index entry, and texindex isn't prepared for an index sort entry
% that starts with \.
- %
+ %
% Since macro invocations are followed by braces, we can just redefine them
% to take a single TeX argument. The case of a macro invocation that
% goes to end-of-line is not handled.
- %
+ %
\macrolist
}
% to re-insert the same penalty (values >10000 are used for various
% signals); since we just inserted a non-discardable item, any
% following glue (such as a \parskip) would be a breakpoint. For example:
- %
+ %
% @deffn deffn-whatever
% @vindex index-whatever
% Description.
\gdef\chaplevelprefix{\the\chapno.}%
\resetallfloatnos
%
- \message{\putwordChapter\space \the\chapno}%
+ % \putwordChapter can contain complex things in translations.
+ \toks0=\expandafter{\putwordChapter}%
+ \message{\the\toks0 \space \the\chapno}%
%
% Write the actual heading.
\chapmacro{#1}{Ynumbered}{\the\chapno}%
\global\let\subsubsection = \numberedsubsubsec
}
-\outer\parseargdef\appendix{\apphead0{#1}} % normally apphead0 calls appendixzzz
+\outer\parseargdef\appendix{\apphead0{#1}} % normally calls appendixzzz
+%
\def\appendixzzz#1{%
\global\secno=0 \global\subsecno=0 \global\subsubsecno=0
\global\advance\appendixno by 1
\gdef\chaplevelprefix{\appendixletter.}%
\resetallfloatnos
%
- \def\appendixnum{\putwordAppendix\space \appendixletter}%
- \message{\appendixnum}%
+ % \putwordAppendix can contain complex things in translations.
+ \toks0=\expandafter{\putwordAppendix}%
+ \message{\the\toks0 \space \appendixletter}%
%
\chapmacro{#1}{Yappendix}{\appendixletter}%
%
% 3) Likewise, headings look best if no \parindent is used, and
% if justification is not attempted. Hence \raggedright.
-
\def\majorheading{%
{\advance\chapheadingskip by 10pt \chapbreak }%
\parsearg\chapheadingzzz
\def\chapheading{\chapbreak \parsearg\chapheadingzzz}
\def\chapheadingzzz#1{%
{\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
- \parindent=0pt\raggedright
- \rm #1\hfill}}%
+ \parindent=0pt\ptexraggedright
+ \rmisbold #1\hfill}}%
\bigskip \par\penalty 200\relax
\suppressfirstparagraphindent
}
\xdef\lastchapterdefs{%
\gdef\noexpand\thischaptername{\the\toks0}%
\gdef\noexpand\thischapternum{\appendixletter}%
- \gdef\noexpand\thischapter{\putwordAppendix{} \noexpand\thischapternum:
+ % \noexpand\putwordAppendix avoids expanding indigestible
+ % commands in some of the translations.
+ \gdef\noexpand\thischapter{\noexpand\putwordAppendix{}
+ \noexpand\thischapternum:
\noexpand\thischaptername}%
}%
\else
\xdef\lastchapterdefs{%
\gdef\noexpand\thischaptername{\the\toks0}%
\gdef\noexpand\thischapternum{\the\chapno}%
- \gdef\noexpand\thischapter{\putwordChapter{} \noexpand\thischapternum:
+ % \noexpand\putwordChapter avoids expanding indigestible
+ % commands in some of the translations.
+ \gdef\noexpand\thischapter{\noexpand\putwordChapter{}
+ \noexpand\thischapternum:
\noexpand\thischaptername}%
}%
\fi\fi\fi
\domark
%
{%
- \chapfonts \rm
+ \chapfonts \rmisbold
%
% Have to define \lastsection before calling \donoderef, because the
% xref code eventually uses it. On the other hand, it has to be called
%
% Typeset the actual heading.
\nobreak % Avoid page breaks at the interline glue.
- \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
+ \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \ptexraggedright
\hangindent=\wd0 \centerparametersmaybe
\unhbox0 #1\par}%
}%
%
\def\unnchfopen #1{%
\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
- \parindent=0pt\raggedright
- \rm #1\hfill}}\bigskip \par\nobreak
+ \parindent=0pt\ptexraggedright
+ \rmisbold #1\hfill}}\bigskip \par\nobreak
}
\def\chfopen #1#2{\chapoddpage {\chapfonts
\vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}%
\def\centerchfopen #1{%
\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
\parindent=0pt
- \hfill {\rm #1}\hfill}}\bigskip \par\nobreak
+ \hfill {\rmisbold #1}\hfill}}\bigskip \par\nobreak
}
\def\CHAPFopen{%
\global\let\chapmacro=\chfopen
\def\sectionheading#1#2#3#4{%
{%
% Switch to the right set of fonts.
- \csname #2fonts\endcsname \rm
+ \csname #2fonts\endcsname \rmisbold
%
\def\sectionlevel{#2}%
\def\temptype{#3}%
\xdef\lastsectiondefs{%
\gdef\noexpand\thissectionname{\the\toks0}%
\gdef\noexpand\thissectionnum{#4}%
- \gdef\noexpand\thissection{\putwordSection{} \noexpand\thissectionnum:
+ % \noexpand\putwordSection avoids expanding indigestible
+ % commands in some of the translations.
+ \gdef\noexpand\thissection{\noexpand\putwordSection{}
+ \noexpand\thissectionnum:
\noexpand\thissectionname}%
}%
\fi
\xdef\lastsectiondefs{%
\gdef\noexpand\thissectionname{\the\toks0}%
\gdef\noexpand\thissectionnum{#4}%
- \gdef\noexpand\thissection{\putwordSection{} \noexpand\thissectionnum:
+ % \noexpand\putwordSection avoids expanding indigestible
+ % commands in some of the translations.
+ \gdef\noexpand\thissection{\noexpand\putwordSection{}
+ \noexpand\thissectionnum:
\noexpand\thissectionname}%
}%
\fi
\fi\fi\fi
%
+ % Go into vertical mode. Usually we'll already be there, but we
+ % don't want the following whatsit to end up in a preceding paragraph
+ % if the document didn't happen to have a blank line.
+ \par
+ %
% Output the mark. Pass it through \safewhatsit, to take care of
% the preceding space.
\safewhatsit\domark
\nobreak
%
% Output the actual section heading.
- \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
+ \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \ptexraggedright
\hangindent=\wd0 % zero if no section number
\unhbox0 #1}%
}%
% glue accumulate. (Not a breakpoint because it's preceded by a
% discardable item.)
\vskip-\parskip
- %
+ %
% This is purely so the last item on the list is a known \penalty >
% 10000. This is so \startdefun can avoid allowing breakpoints after
% section headings. Otherwise, it would insert a valid breakpoint between:
- %
+ %
% @section sec-whatever
% @deffn def-whatever
\penalty 10001
% These characters do not print properly in the Computer Modern roman
% fonts, so we must take special care. This is more or less redundant
% with the Texinfo input format setup at the end of this file.
-%
+%
\def\activecatcodes{%
\catcode`\"=\active
\catcode`\$=\active
% redefined for the two-volume lispref. We always output on
% \jobname.toc even if this is redefined.
-%
+%
\def\tocreadfilename{\jobname.toc}
% Normal (long) toc.
\message{environments,}
% @foo ... @end foo.
-% @point{}, @result{}, @expansion{}, @print{}, @equiv{}.
-%
-% Since these characters are used in examples, they should be an even number of
-% \tt widths. Each \tt character is 1en, so two makes it 1em.
-%
-\def\point{$\star$}
-\def\arrow{\leavevmode\raise.05ex\hbox to 1em{\hfil$\rightarrow$\hfil}}
-\def\result{\leavevmode\raise.05ex\hbox to 1em{\hfil$\Rightarrow$\hfil}}
-\def\expansion{\leavevmode\hbox to 1em{\hfil$\mapsto$\hfil}}
-\def\print{\leavevmode\lower.1ex\hbox to 1em{\hfil$\dashv$\hfil}}
-\def\equiv{\leavevmode\hbox to 1em{\hfil$\ptexequiv$\hfil}}
-
-% The @error{} command.
-% Adapted from the TeXbook's \boxit.
-%
-\newbox\errorbox
-%
-{\tentt \global\dimen0 = 3em}% Width of the box.
-\dimen2 = .55pt % Thickness of rules
-% The text. (`r' is open on the right, `e' somewhat less so on the left.)
-\setbox0 = \hbox{\kern-.75pt \reducedsf error\kern-1.5pt}
-%
-\setbox\errorbox=\hbox to \dimen0{\hfil
- \hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right.
- \advance\hsize by -2\dimen2 % Rules.
- \vbox{%
- \hrule height\dimen2
- \hbox{\vrule width\dimen2 \kern3pt % Space to left of text.
- \vtop{\kern2.4pt \box0 \kern2.4pt}% Space above/below.
- \kern3pt\vrule width\dimen2}% Space to right.
- \hrule height\dimen2}
- \hfil}
-%
-\def\error{\leavevmode\lower.7ex\copy\errorbox}
-
% @tex ... @end tex escapes into raw Tex temporarily.
% One exception: @ is still an escape character, so that @end tex works.
% But \@ or @@ will get a plain tex @ character.
\envdef\tex{%
+ \setupmarkupstyle{tex}%
\catcode `\\=0 \catcode `\{=1 \catcode `\}=2
\catcode `\$=3 \catcode `\&=4 \catcode `\#=6
\catcode `\^=7 \catcode `\_=8 \catcode `\~=\active \let~=\tie
\catcode `\|=\other
\catcode `\<=\other
\catcode `\>=\other
+ \catcode`\`=\other
+ \catcode`\'=\other
\escapechar=`\\
%
\let\b=\ptexb
% This macro is called at the beginning of all the @example variants,
% inside a group.
+\newdimen\nonfillparindent
\def\nonfillstart{%
\aboveenvbreak
\hfuzz = 12pt % Don't be fussy
\let\par = \lisppar % don't ignore blank lines
\obeylines % each line of input is a line of output
\parskip = 0pt
+ % Turn off paragraph indentation but redefine \indent to emulate
+ % the normal \indent.
+ \nonfillparindent=\parindent
\parindent = 0pt
+ \let\indent\nonfillindent
+ %
\emergencystretch = 0pt % don't try to avoid overfull boxes
\ifx\nonarrowing\relax
\advance \leftskip by \lispnarrowing
\let\exdent=\nofillexdent
}
+\begingroup
+\obeyspaces
+% We want to swallow spaces (but not other tokens) after the fake
+% @indent in our nonfill-environments, where spaces are normally
+% active and set to @tie, resulting in them not being ignored after
+% @indent.
+\gdef\nonfillindent{\futurelet\temp\nonfillindentcheck}%
+\gdef\nonfillindentcheck{%
+\ifx\temp %
+\expandafter\nonfillindentgobble%
+\else%
+\leavevmode\nonfillindentbox%
+\fi%
+}%
+\endgroup
+\def\nonfillindentgobble#1{\nonfillindent}
+\def\nonfillindentbox{\hbox to \nonfillparindent{\hss}}
+
% If you want all examples etc. small: @set dispenvsize small.
% If you want even small examples the full size: @set dispenvsize nosmall.
% This affects the following displayed environments:
%
\maketwodispenvs {lisp}{example}{%
\nonfillstart
- \tt\quoteexpand
+ \tt\setupmarkupstyle{example}%
\let\kbdfont = \kbdexamplefont % Allow @kbd to do something special.
\gobble % eat return
}
\let\Eflushright = \afterenvbreak
+% @raggedright does more-or-less normal line breaking but no right
+% justification. From plain.tex.
+\envdef\raggedright{%
+ \rightskip0pt plus2em \spaceskip.3333em \xspaceskip.5em\relax
+}
+\let\Eraggedright\par
+
+\envdef\raggedleft{%
+ \parindent=0pt \leftskip0pt plus2em
+ \spaceskip.3333em \xspaceskip.5em \parfillskip=0pt
+ \hbadness=10000 % Last line will usually be underfull, so turn off
+ % badness reporting.
+}
+\let\Eraggedleft\par
+
+\envdef\raggedcenter{%
+ \parindent=0pt \rightskip0pt plus1em \leftskip0pt plus1em
+ \spaceskip.3333em \xspaceskip.5em \parfillskip=0pt
+ \hbadness=10000 % Last line will usually be underfull, so turn off
+ % badness reporting.
+}
+\let\Eraggedcenter\par
+
+
% @quotation does normal linebreaking (hence we can't use \nonfillstart)
% and narrows the margins. We keep \parskip nonzero in general, since
% we're doing normal filling. So, when using \aboveenvbreak and
\do\ \do\\\do\{\do\}\do\$\do\&%
\do\#\do\^\do\^^K\do\_\do\^^A\do\%\do\~%
\do\<\do\>\do\|\do\@\do+\do\"%
+ % Don't do the quotes -- if we do, @set txicodequoteundirected and
+ % @set txicodequotebacktick will not have effect on @verb and
+ % @verbatim, and ?` and !` ligatures won't get disabled.
+ %\do\`\do\'%
}
%
% [Knuth] p. 380
\def\setupverb{%
\tt % easiest (and conventionally used) font for verbatim
\def\par{\leavevmode\endgraf}%
- \catcode`\`=\active
+ \setupmarkupstyle{verb}%
\tabeightspaces
% Respect line breaks,
% print special symbols as themselves, and
\newdimen\tabw \setbox0=\hbox{\tt\space} \tabw=8\wd0 % tab amount
%
\def\starttabbox{\setbox0=\hbox\bgroup}
-
-% Allow an option to not replace quotes with a regular directed right
-% quote/apostrophe (char 0x27), but instead use the undirected quote
-% from cmtt (char 0x0d). The undirected quote is ugly, so don't make it
-% the default, but it works for pasting with more pdf viewers (at least
-% evince), the lilypond developers report. xpdf does work with the
-% regular 0x27.
-%
-\def\codequoteright{%
- \expandafter\ifx\csname SETtxicodequoteundirected\endcsname\relax
- \expandafter\ifx\csname SETcodequoteundirected\endcsname\relax
- '%
- \else \char'15 \fi
- \else \char'15 \fi
-}
-%
-% and a similar option for the left quote char vs. a grave accent.
-% Modern fonts display ASCII 0x60 as a grave accent, so some people like
-% the code environments to do likewise.
-%
-\def\codequoteleft{%
- \expandafter\ifx\csname SETtxicodequotebacktick\endcsname\relax
- \expandafter\ifx\csname SETcodequotebacktick\endcsname\relax
- \relax`% the \relax disables the `! and `? ligatures
- \else \char'22 \fi
- \else \char'22 \fi
-}
%
\begingroup
\catcode`\^^I=\active
\wd0=\dimen0 \box0 \starttabbox
}%
}
- \catcode`\'=\active
- \gdef\rquoteexpand{\catcode\rquoteChar=\active \def'{\codequoteright}}%
- %
- \catcode`\`=\active
- \gdef\lquoteexpand{\catcode\lquoteChar=\active \def`{\codequoteleft}}%
- %
- \gdef\quoteexpand{\rquoteexpand \lquoteexpand}%
\endgroup
% start the verbatim environment.
% Easiest (and conventionally used) font for verbatim
\tt
\def\par{\leavevmode\egroup\box0\endgraf}%
- \catcode`\`=\active
\tabexpand
- \quoteexpand
+ \setupmarkupstyle{verbatim}%
% Respect line breaks,
% print special symbols as themselves, and
% make each space count
%
% On the other hand, if an argument has two dashes (for instance), we
% want a way to get ttsl. Let's try @var for that.
- \let\var=\ttslanted
+ \def\var##1{{\setupmarkupstyle{var}\ttslanted{##1}}}%
#1%
\sl\hyphenchar\font=45
}
% This does \let #1 = #2, with \csnames; that is,
% \let \csname#1\endcsname = \csname#2\endcsname
% (except of course we have to play expansion games).
-%
+%
\def\cslet#1#2{%
\expandafter\let
\csname#1\expandafter\endcsname
\closein 1
\endgroup % end raw TeX
\endgroup}
-}
%
% If they passed de_DE, and txi-de_DE.tex doesn't exist,
% try txi-de.tex.
-%
-\def\documentlanguagetrywithoutunderscore#1_#2\finish{%
+%
+\gdef\documentlanguagetrywithoutunderscore#1_#2\finish{%
\openin 1 txi-#1.tex
\ifeof 1
\errhelp = \nolanghelp
\errmessage{Cannot read language file txi-#1.tex}%
\else
+ \globaldefs = 1 % everything in the txi-LL files needs to persist
\input txi-#1.tex
\fi
\closein 1
}
+}% end of special _ catcode
%
\newhelp\nolanghelp{The given language definition file cannot be found or
is empty. Maybe you need to install it? Putting it in the current
% This macro is called from txi-??.tex files; the first argument is the
% \language name to set (without the "\lang@" prefix), the second and
% third args are \{left,right}hyphenmin.
-%
+%
% The language names to pass are determined when the format is built.
% See the etex.log file created at that time, e.g.,
% /usr/local/texlive/2008/texmf-var/web2c/pdftex/etex.log.
-%
+%
% With TeX Live 2008, etex now includes hyphenation patterns for all
% available languages. This means we can support hyphenation in
% Texinfo, at least to some extent. (This still doesn't solve the
% accented characters problem.)
-%
+%
\catcode`@=11
\def\txisetlanguage#1#2#3{%
% do not set the language if the name is undefined in the current TeX.
\setnonasciicharscatcode\active
\lattwochardefs
%
- \else \ifx \declaredencoding \latone
+ \else \ifx \declaredencoding \latone
\setnonasciicharscatcode\active
\latonechardefs
%
\setnonasciicharscatcode\active
\utfeightchardefs
%
- \else
+ \else
\message{Unknown document encoding #1, ignoring.}%
%
\fi % utfeight
% A message to be logged when using a character that isn't available
% the default font encoding (OT1).
-%
+%
\def\missingcharmsg#1{\message{Character missing in OT1 encoding: #1.}}
% Take account of \c (plain) vs. \, (Texinfo) difference.
%
% Latin1 (ISO-8859-1) character definitions.
\def\latonechardefs{%
- \gdef^^a0{~}
+ \gdef^^a0{~}
\gdef^^a1{\exclamdown}
- \gdef^^a2{\missingcharmsg{CENT SIGN}}
+ \gdef^^a2{\missingcharmsg{CENT SIGN}}
\gdef^^a3{{\pounds}}
\gdef^^a4{\missingcharmsg{CURRENCY SIGN}}
\gdef^^a5{\missingcharmsg{YEN SIGN}}
- \gdef^^a6{\missingcharmsg{BROKEN BAR}}
+ \gdef^^a6{\missingcharmsg{BROKEN BAR}}
\gdef^^a7{\S}
- \gdef^^a8{\"{}}
- \gdef^^a9{\copyright}
+ \gdef^^a8{\"{}}
+ \gdef^^a9{\copyright}
\gdef^^aa{\ordf}
- \gdef^^ab{\missingcharmsg{LEFT-POINTING DOUBLE ANGLE QUOTATION MARK}}
+ \gdef^^ab{\guillemetleft}
\gdef^^ac{$\lnot$}
- \gdef^^ad{\-}
- \gdef^^ae{\registeredsymbol}
+ \gdef^^ad{\-}
+ \gdef^^ae{\registeredsymbol}
\gdef^^af{\={}}
%
\gdef^^b0{\textdegree}
\gdef^^b9{$^1$}
\gdef^^ba{\ordm}
%
- \gdef^^bb{\missingcharmsg{RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK}}
+ \gdef^^bb{\guilletright}
\gdef^^bc{$1\over4$}
\gdef^^bd{$1\over2$}
\gdef^^be{$3\over4$}
\gdef^^c2{\^A}
\gdef^^c3{\~A}
\gdef^^c4{\"A}
- \gdef^^c5{\ringaccent A}
+ \gdef^^c5{\ringaccent A}
\gdef^^c6{\AE}
\gdef^^c7{\cedilla C}
\gdef^^c8{\`E}
\gdef^^ce{\^I}
\gdef^^cf{\"I}
%
- \gdef^^d0{\missingcharmsg{LATIN CAPITAL LETTER ETH}}
+ \gdef^^d0{\DH}
\gdef^^d1{\~N}
\gdef^^d2{\`O}
\gdef^^d3{\'O}
\gdef^^db{\^U}
\gdef^^dc{\"U}
\gdef^^dd{\'Y}
- \gdef^^de{\missingcharmsg{LATIN CAPITAL LETTER THORN}}
+ \gdef^^de{\TH}
\gdef^^df{\ss}
%
\gdef^^e0{\`a}
\gdef^^ee{\^{\dotless i}}
\gdef^^ef{\"{\dotless i}}
%
- \gdef^^f0{\missingcharmsg{LATIN SMALL LETTER ETH}}
+ \gdef^^f0{\dh}
\gdef^^f1{\~n}
\gdef^^f2{\`o}
\gdef^^f3{\'o}
\gdef^^fb{\^u}
\gdef^^fc{\"u}
\gdef^^fd{\'y}
- \gdef^^fe{\missingcharmsg{LATIN SMALL LETTER THORN}}
+ \gdef^^fe{\th}
\gdef^^ff{\"y}
}
% Latin2 (ISO-8859-2) character definitions.
\def\lattwochardefs{%
\gdef^^a0{~}
- \gdef^^a1{\Aogonek}
+ \gdef^^a1{\ogonek{A}}
\gdef^^a2{\u{}}
\gdef^^a3{\L}
\gdef^^a4{\missingcharmsg{CURRENCY SIGN}}
\gdef^^af{\dotaccent Z}
%
\gdef^^b0{\textdegree}
- \gdef^^b1{\aogonek}
+ \gdef^^b1{\ogonek{a}}
\gdef^^b2{\ogonek{ }}
\gdef^^b3{\l}
\gdef^^b4{\'{}}
\gdef^^c7{\cedilla C}
\gdef^^c8{\v C}
\gdef^^c9{\'E}
- \gdef^^ca{\Eogonek}
+ \gdef^^ca{\ogonek{E}}
\gdef^^cb{\"E}
\gdef^^cc{\v E}
\gdef^^cd{\'I}
\gdef^^ce{\^I}
\gdef^^cf{\v D}
%
- \gdef^^d0{\missingcharmsg{LATIN CAPITAL LETTER D WITH STROKE}}
+ \gdef^^d0{\DH}
\gdef^^d1{\'N}
\gdef^^d2{\v N}
\gdef^^d3{\'O}
\gdef^^d6{\"O}
\gdef^^d7{$\times$}
\gdef^^d8{\v R}
- \gdef^^d9{\ringaccent U}
+ \gdef^^d9{\ringaccent U}
\gdef^^da{\'U}
\gdef^^db{\H U}
\gdef^^dc{\"U}
\gdef^^e7{\cedilla c}
\gdef^^e8{\v c}
\gdef^^e9{\'e}
- \gdef^^ea{\eogonek}
+ \gdef^^ea{\ogonek{e}}
\gdef^^eb{\"e}
\gdef^^ec{\v e}
\gdef^^ed{\'\i}
\gdef^^ee{\^\i}
\gdef^^ef{\v d}
%
- \gdef^^f0{\missingcharmsg{LATIN SMALL LETTER D WITH STROKE}}
+ \gdef^^f0{\dh}
\gdef^^f1{\'n}
\gdef^^f2{\v n}
\gdef^^f3{\'o}
}
% UTF-8 character definitions.
-%
+%
% This code to support UTF-8 is based on LaTeX's utf8.def, with some
% changes for Texinfo conventions. It is included here under the GPL by
% permission from Frank Mittelbach and the LaTeX team.
-%
+%
\newcount\countUTFx
\newcount\countUTFy
\newcount\countUTFz
\DeclareUnicodeCharacter{00CE}{\^I}
\DeclareUnicodeCharacter{00CF}{\"I}
+ \DeclareUnicodeCharacter{00D0}{\DH}
\DeclareUnicodeCharacter{00D1}{\~N}
\DeclareUnicodeCharacter{00D2}{\`O}
\DeclareUnicodeCharacter{00D3}{\'O}
\DeclareUnicodeCharacter{00DB}{\^U}
\DeclareUnicodeCharacter{00DC}{\"U}
\DeclareUnicodeCharacter{00DD}{\'Y}
+ \DeclareUnicodeCharacter{00DE}{\TH}
\DeclareUnicodeCharacter{00DF}{\ss}
\DeclareUnicodeCharacter{00E0}{\`a}
\DeclareUnicodeCharacter{00EE}{\^{\dotless{i}}}
\DeclareUnicodeCharacter{00EF}{\"{\dotless{i}}}
+ \DeclareUnicodeCharacter{00F0}{\dh}
\DeclareUnicodeCharacter{00F1}{\~n}
\DeclareUnicodeCharacter{00F2}{\`o}
\DeclareUnicodeCharacter{00F3}{\'o}
\DeclareUnicodeCharacter{00FB}{\^u}
\DeclareUnicodeCharacter{00FC}{\"u}
\DeclareUnicodeCharacter{00FD}{\'y}
+ \DeclareUnicodeCharacter{00FE}{\th}
\DeclareUnicodeCharacter{00FF}{\"y}
\DeclareUnicodeCharacter{0100}{\=A}
\DeclareUnicodeCharacter{0101}{\=a}
\DeclareUnicodeCharacter{0102}{\u{A}}
\DeclareUnicodeCharacter{0103}{\u{a}}
- \DeclareUnicodeCharacter{0104}{\Aogonek}
- \DeclareUnicodeCharacter{0105}{\aogonek}
+ \DeclareUnicodeCharacter{0104}{\ogonek{A}}
+ \DeclareUnicodeCharacter{0105}{\ogonek{a}}
\DeclareUnicodeCharacter{0106}{\'C}
\DeclareUnicodeCharacter{0107}{\'c}
\DeclareUnicodeCharacter{0108}{\^C}
\DeclareUnicodeCharacter{0109}{\^c}
- \DeclareUnicodeCharacter{0118}{\Eogonek}
- \DeclareUnicodeCharacter{0119}{\eogonek}
+ \DeclareUnicodeCharacter{0118}{\ogonek{E}}
+ \DeclareUnicodeCharacter{0119}{\ogonek{e}}
\DeclareUnicodeCharacter{010A}{\dotaccent{C}}
\DeclareUnicodeCharacter{010B}{\dotaccent{c}}
\DeclareUnicodeCharacter{010C}{\v{C}}
\message{and turning on texinfo input format.}
+% DEL is a comment character, in case @c does not suffice.
+\catcode`\^^? = 14
+
% Define macros to output various characters with catcode for normal text.
\catcode`\"=\other
\catcode`\~=\other
% Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of
% the literal character `\'.
-%
+%
@def@normalturnoffactive{%
@let\=@normalbackslash
@let"=@normaldoublequote
@let>=@normalgreater
@let+=@normalplus
@let$=@normaldollar %$ font-lock fix
+ @markupsetuplqdefault
+ @markupsetuprqdefault
@unsepspaces
}
@c txicodequotebacktick work right in, e.g., @w{@code{`foo'}}. If we
@c don't make ` and ' active, @code will not get them as active chars.
@c Do this last of all since we use ` in the previous @catcode assignments.
-@c (not ready yet, sigh)
-@c atcode`@'=@active @let'@rq
-@c atcode`@`=@active @let`@lq
-
+@catcode`@'=@active
+@catcode`@`=@active
+@markupsetuplqdefault
+@markupsetuprqdefault
+
@c Local variables:
@c eval: (add-hook 'write-file-hooks 'time-stamp)
@c page-delimiter: "^\\\\message"
projects / lilypond.git / blobdiff