-% lilyponddefs.tex
-%
-% Include file for LilyPond.
-%
-% This file defines various macros to acommodate lilypond output.
-%
-% It should run with plain TeX, LaTeX, pdftex, and texinfo.
-%
-% To avoid interferences, lilyponddefs.tex should be loaded within a group.
-% To load it only once, most of the definitions must be global.
-%
-% The overall structure of a file created by LilyPond is as follows:
-%
-% <lilypond parameter definitions>
-% \ifx\lilypondstart \undefined
-% \input lilyponddefs
-% \fi
-% \lilypondstart
-% <font setup and note output>
-% \lilypondend
-%
-% No footers and headers are provided for the stand-alone run (i.e., for
-% directly saying `latex <LilyPond output>'.
-%
-%
-% Avoid \par while reading this file.
+%%% lilyponddefs.tex -- TeX macros for LilyPond output.
+%%%
+%%% source file of the GNU LilyPond music typesetter
+%%%
+%%% (c) 1998--2006 Jan Nieuwenhuizen <janneke@gnu.org>
+%%% Han-Wen Nienhuys <hanwen@cs.uu.nl>
+%%% Mats Bengtsson <mats.bengtsson@s3.kth.se>
+%%%
+%%
+%% Avoid \par while reading this file.
+%%
\edef\lilyponddefsELC{\the\endlinechar}%
\endlinechar -1\relax
-% the next three macros are taken from LaTeX
-\long\gdef\lilypondfirst#1#2{#1}
+%% This runs with plain TeX, LaTeX, pdftex, and texinfo.
+%%
+%% To avoid interferences, lilyponddefs.tex must be loaded within a group.
+%% It is loaded only once, so the definitions must be global.
+%%
+%% The overall structure of a file created by LilyPond is as follows:
+%%
+%% <lilypond parameter definitions>
+%% <font setup>
+%% \ifx\lilypondstart \undefined
+%% \input lilyponddefs
+%% \fi
+%% \lilypondstart
+%% <note output>
+%% \lilypondend
+
+%% A temporary variable.
+%%
+\newdimen\lytempdim
+%% The scaling factor for all dimensions.
+%%
+\newdimen\outputscale
+
+\long\gdef\lilypondfirst#1#2{#1}
\long\gdef\lilypondsecond#1#2{#2}
+%% \lilypondundefined{xxx}{foo}{bar}
+%%
+%% If `xxx' (without the leading backslash) is an undefined macro,
+%% execute block `foo'. Otherwise, execute block `bar'. Based on
+%% a similar macro from the LaTeX kernel.
+%%
\gdef\lilypondifundefined#1{
\expandafter\ifx\csname#1\endcsname\relax
\expandafter\lilypondfirst
\fi
}
+%% Urgh. LilyPond uses EC fonts, but texinfo is based on CM. We thus
+%% have to handle T1 font encoding by ourselves; all manipulations are
+%% collected in the macro \lilypondECencoding. Note that the following
+%% code only provides the texinfo interface, not complete access to all
+%% EC glyphs.
+%%
+%% All definitions are taken from texinfo or LaTeX (with modifications
+%% if necessary).
+%%
+\begingroup
+\catcode `\@=11\relax
+\gdef\lilypondECencoding{
+ \def\"##1{
+ {\accent4 ##1}}
+ \def\'##1{
+ {\accent1 ##1}}
+ \def\,##1{
+ {\leavevmode
+ \setbox\z@\hbox{##1}
+ \ifdim\ht\z@=1ex
+ \accent11 ##1
+ \else
+ {\ooalign{
+ \unhbox\z@
+ \crcr
+ \hidewidth
+ \char11
+ \hidewidth}}
+ \fi}}
+ \def\=##1{
+ {\accent9 ##1}}
+ \def\^##1{
+ {\accent2 ##1}}
+ \def\`##1{
+ {\accent0 ##1}}
+ \def\~##1{
+ {\accent3 ##1}}
+ \def\dotaccent##1{
+ {\accent10 ##1}}
+ \def\H##1{
+ {\accent5 ##1}}
+ \def\ringaccent##1{
+ {\accent6 ##1}}
+% \def\tieaccent##1{} % unsupported: this is TS1
+ \def\u##1{
+ {\accent8 ##1}}
+ \def\ubaraccent##1{
+ {\o@lign{
+ \relax
+ ##1
+ \crcr
+ \hidewidth
+ \sh@ft{29}\vbox to.2ex{
+ \hbox{\char9}
+ \vss}
+ \hidewidth}}}
+ \def\udotaccent##1{
+ {\o@lign{
+ \relax
+ ##1
+ \crcr
+ \hidewidth
+ \sh@ft{10}.
+ \hidewidth}}}
+ \def\v##1{
+ {\accent7 ##1}}
+
+ \chardef\exclamdown=189
+ \chardef\questiondown=190
+
+ \def\aa{
+ \ringaccent{a}}
+ \def\AA{
+ \ringaccent{A}}
+ \chardef\AE=198
+ \chardef\ae=230
+ \chardef\ptexi=25
+ \chardef\j=26
+ \chardef\L=138
+ \chardef\l=170
+ \chardef\O=216
+ \chardef\o=248
+ \chardef\OE=215
+ \chardef\oe=247
+ \chardef\ss=255
+}
+\endgroup
+
+%% This macro provides the necessary setup to make the lilypond data
+%% work with plain TeX, LaTeX, and texinfo.
+%%
+%% The reason of using \begingroup and \endgroup is to make the macro \x
+%% immediately disappear after it has been executed. Since we have \def
+%% within \def within \gdef, four hash signs (`#') are needed for
+%% parameters.
+%%
+%% \lilypondfontencoding is emitted by LilyPond to set the encoding of
+%% text strings.
+%%
\gdef\lilypondstart{
+ \frenchspacing
+ \outputscale \lilypondpaperoutputscale\lilypondpaperunit
+
\begingroup
\catcode `\@=11\relax
- % \@nodocument is defined as \relax after `\begin{document}'
+
+ %% \@nodocument is defined as \relax after `\begin{document}'
\lilypondifundefined{@nodocument}
- {
- % either plain TeX or texinfo or not at the beginning of LaTeX input
- \def\x{\endgroup}
- }
- {
- % provide a proper LaTeX preamble (for A4 paper format)
- \def\x{
- \endgroup
- \def\lilyponddocument{}
- \documentclass[a4paper]{article}
- \pagestyle{empty}
- % \begin is defined as \outer in texinfo, thus we use \csname
- \csname begin\endcsname{document}
- % center staves horizontally on page
- \ifdim\lilypondpaperlinewidth\lilypondpaperunit > 0pt
+ {%% Either plain TeX or texinfo or not at the beginning of LaTeX input.
+ \def\x{
+ \endgroup
+
+ \def\lilypondfontencoding####1{
+ \lilypondECencoding}
+ \def\lilypondpagebreak{
+ \eject}
+ \def\lilypondnopagebreak{
+ \ifvmode
+ \penalty 10000\relax
+ \fi}}}
+
+ {%% LaTeX mode: Provide a complete preamble.
+ \def\x{
+ \endgroup
+
+ %% Indicate that we shall emit `\end{document}' while executing
+ %% \lilypondend.
+ \def\lilyponddocument{}
+
+ \def\lilypondfontencoding####1{
+ \fontencoding{####1}
+ \selectfont}
+ \def\lilypondpagebreak{
+ \newpage}
+ \def\lilypondnopagebreak{
+ \nopagebreak}
+
+ \documentclass[\lilyponddocumentclassoptions]{article}
+
+ %% As a safety guard, don't produce auxiliary files.
+ \nofiles
+
+ %% FIXME: workaround non-existent TeX.def.
+ \def\TeXdef{TeX}\ifx\TeXdef\lilypondpaperinputencoding
+ \usepackage[latin1]{inputenc}
+ \else
+ \usepackage[\lilypondpaperinputencoding]{inputenc}
+ \fi
+ \pagestyle{empty}
+
+ \usepackage{color}
+
+ \lilypondifundefined{lilypondclassic}
+ {%% If not in `classic' mode, undo LaTeX's page layout settings
+ %% since LilyPond does the layout by itself.
+ \topmargin-1in
+ \headheight0pt\headsep0pt
+ \oddsidemargin-1in
+ \evensidemargin\oddsidemargin}
+
+ {%% Otherwise center output horizontally, without changing the
+ %% vertical positioning.
\hsize\lilypondpaperlinewidth\lilypondpaperunit
- % we abuse \scoreshift temporarily
- \scoreshift \paperwidth
- \advance\scoreshift -\the\hsize
- \scoreshift 0.5\scoreshift
- \advance\scoreshift -1in
- \oddsidemargin \scoreshift
- \evensidemargin \scoreshift
- \fi
- \parindent 0pt
- }
- }
-
- \x
-
- \lilypondifundefined{mustmakelilypondtitle}
- {}
- {\makelilypondtitle}
+ \lytempdim \paperwidth
+ \advance\lytempdim -\the\hsize
+ \lytempdim 0.5\lytempdim
+ \advance\lytempdim -1in
+ \oddsidemargin \lytempdim
+ \evensidemargin \lytempdim}
- \lilypondifundefined{mustmakelilypondpiecetitle}
- {}
- {\makelilypondpiecetitle}
-}
+ \parindent 0pt
+ %% We can't directly say `\begin{document}' in this macro since
+ %% older versions of texinfo.tex define \begin as \outer; this
+ %% means that it causes an error if \begin is found within another
+ %% macro (even if the corresponding code will never be executed).
+ %% As a workaround we use \csname to call \begin.
+ \csname begin\endcsname{document}}}
+ \x}
+
+%% The opposite of \lilypondstart.
+%%
\gdef\lilypondend{
+ %% Handle the `lastpagefill' parameter from the \layout block.
+ %% Ignore it if \lilypondbook is defined.
\lilypondifundefined{lilypondbook}
{\lilypondifundefined{lilypondpaperlastpagefill}
- {\vskip 0pt plus \lilypondpaperinterscorelinefill00 fill}
- {}
- }
+ {\vskip 0pt plus\lilypondpaperinterscorelinefill00 fill}
+ {}}
{}
\begingroup
\lilypondifundefined{lilyponddocument}
- {
- \def\x{\endgroup}
- }
- {
- \def\x{
- \endgroup
- \csname end\endcsname{document}
- }
- }
-
- \x
-}
-
-% this is an inversed \loop ... \repeat macro
-\def\lilypondloop#1\lilypondrepeat{
- \def\lilypondbody{#1}
- \lilyponditerate
-}
-
-\def\lilyponditerate{
- % \if ...
- \lilypondbody
- \let\lilypondnext \relax
- \else
- \let\lilypondnext \lilyponditerate
- \fi
- \lilypondnext
-}
+ {\def\x{
+ \endgroup}}
+ {\def\x{
+ \endgroup
+ \csname end\endcsname{document}}}
+ \x}
-% the following macro is executed only once
+%% Load the PostScript drawing routines. This is done using \special.
+%% To avoid multiple inclusions, redefine \lilypondspecial to a no-op
+%% afterwards.
+%%
\gdef\lilypondspecial{
\special{header=music-drawing-routines.ps}
- \gdef\lilypondspecial{}
-}
-
-% the feta characters
-\input feta20
-
-\global\font\fetasixteen = feta16
-\gdef\fetafont{\fetasixteen}
-\gdef\fetachar#1{\hbox{\fetasixteen#1}}
-
-\gdef\botalign#1{
- \vbox to 0pt{\vss #1}
-}
-\gdef\leftalign#1{
- \hbox to 0pt{#1\hss}
-}
+ \gdef\lilypondspecial{}}
+%% The most used macro in LilyPond output. Put #3 into a zero-width box
+%% which is moved to the right by #1 (scaled by \outputscale) and moved
+%% up by #2 (also scaled by \outputscale).
+%%
\gdef\lyitem#1#2#3{
- \botalign{
- \hbox{\raise #1\outputscale
- \leftalign{\kern #2\outputscale #3}}
- }
-}
+ \raise #2\outputscale \hbox to 0pt {
+ \kern #1\outputscale
+ #3
+ \hss}}
+%% All LilyPond music data is enclosed in this macro (as third argument).
+%% The data (which consists of boxes with zero width) gets an artificial
+%% width of #1 and a height of #2. The resulting box is then centered
+%% vertically along the x-height of the current font.
+%%
+%% Parameters #1 and #2 are scaled by \outputscale.
+%%
\gdef\lybox#1#2#3{
- \hbox to #1\outputscale {
- \lower\scoreshift \vbox to #2\outputscale {
- \hbox{#3}
- \vss
- }
- \hss
- }
-}
+ \lytempdim #2\outputscale
+ \lytempdim -0.5\lytempdim
+ \advance\lytempdim 1ex
+ \leavevmode
+ \raise \lytempdim \hbox to #1\outputscale {
+ %% Convert depth of #3 into height only.
+ \vbox to #2\outputscale {\hbox{#3}\vss}
+ \hss}}
+%% Produce a black bar (width #2, depth #3, height #4) with a vertical
+%% offset #1. Everything is scaled by \outputscale.
+%%
\gdef\lyvrule#1#2#3#4{
- \kern #1\outputscale
- \vrule width #2\outputscale depth #3\outputscale height #4\outputscale
-}
-
-% Attempt to keep lilypiecetitle together with the piece:
-%
-% TODO: figure this out.
-\gdef\myfilbreak{}%\par\vfil\penalty200\vfilneg}
+ \kern#1\outputscale
+ \vrule width #2\outputscale depth #3\outputscale height #4\outputscale}
+%% FIXME: 'interscoreline' and 'lilypondPAPERinterscoreline
+%%
\lilypondifundefined{lilypondpaperinterscorelinefill}
{\gdef\lilypondpaperinterscorelinefill{0}}
{\gdef\lilypondpaperinterscorelinefill{1}}
-\gdef\interscoreline{
- \vskip \lilypondpaperinterscoreline \lilypondpaperunit
- plus \lilypondpaperinterscorelinefill fill
-}
-
-% Are we using PDFTeX? If so, use pdf definitions.
-% MiKTeX checks \pdfoutput the wrong way, thus we use \csname.
-\lilypondifundefined{lilypondpostscript}
- {
- \lilypondifundefined{pdfoutput}
- {\input lily-ps-defs }
- {
- \pdfoutput = 1
- \input lily-pdf-defs %
- }
- }
+%% Allow overriding of interscoreline, e.g., for LilyPond's --preview
+%%
+\lilypondifundefined{interscoreline}
+ {\lilypondifundefined{lilypondclassic}
+ {\gdef\interscoreline{}}
+ {\gdef\interscoreline{
+ \vskip\lilypondpaperinterscoreline\lilypondpaperunit
+ plus \lilypondpaperinterscorelinefill fill}}}
{}
-\newdimen\outputscale
-\newdimen\scoreshift
+%% Include PostScript definitions (which are differently defined for
+%% TeX and pdfTeX). This is loaded once only because the inputted files
+%% define \lilypondpostscript.
+%%
+%% (Don't remove the spaces after the arguments to \input!)
+%%
+%
+%% In teTeX-3.0, latex is actually pdfetex, and we need
+%% ifpdf.sty to determinine if we are really *tex or pdf*tex.
+%
+%% \input ifpdf.sty
+%
+%% However, ifpfd.sty is too smart for LilyPond, so we copy the
+%% logic here. Using \input ifpdf.sty is a no-op when using latex,
+%% and the \ifpdf switch is needed before \documentclass, using
+%% \usepackage{ifpdf} is not an option.
+%
+\input lily-ps-defs
-% Restore newline functionality (disabled to avoid \par).
+% barfs with texi
+% Runaway argument?
+%{
+%! Forbidden control sequence found while scanning use of \lilypondfirst.
+%<inserted text>
+% \par
+%<to be read again>
+% \newif
+%l.330 {\newif
+% \ifpdf
+%?
+%
+%%
+%\lilypondifundefined{lilypondpostscript}
+% {\newif\ifpdf
+% \ifx\pdfoutput\undefined
+% \else
+% \ifx\pdfoutput\relax
+% \else
+% \ifcase\pdfoutput
+% \else
+% \pdftrue
+% \fi
+% \fi
+% \fi
+% \ifpdf
+% {\input lily-pdf-defs }
+% \else
+% {\input lily-ps-defs }
+% \fi}
+% {}
+%
+%% Restore newline functionality (disabled to avoid \par).
+%%
\endlinechar \lilyponddefsELC
\endinput
-% EOF
+%% end lilyponddefs.tex