#! /bin/sh
-ac_help="$ac_help
- --with-gtkmm-prefix=PREFIX
- Prefix where GTK-- is installed (optional)"
-# Check whether --with-gtkmm-prefix or --without-gtkmm-prefix was given.
-if test "${with_gtkmm_prefix+set}" = set; then
- withval="$with_gtkmm_prefix"
- gtkmm_config_prefix="$withval"
-else
- gtkmm_config_prefix=""
-fi
-
-ac_help="$ac_help
- --with-gtkmm-exec-prefix=PREFIX
- Exec prefix where GTK-- is installed (optional)"
-# Check whether --with-gtkmm-exec-prefix or --without-gtkmm-exec-prefix was given.
-if test "${with_gtkmm_exec_prefix+set}" = set; then
- withval="$with_gtkmm_exec_prefix"
- gtkmm_config_exec_prefix="$withval"
-else
- gtkmm_config_exec_prefix=""
-fi
-
-ac_help="$ac_help
- --disable-gtkmmtest Do not try to compile and run a test GTK-- program"
-# Check whether --enable-gtkmmtest or --disable-gtkmmtest was given.
-if test "${enable_gtkmmtest+set}" = set; then
- enableval="$enable_gtkmmtest"
- :
-else
- enable_gtkmmtest=yes
-fi
-
-
- if test x$gtkmm_config_exec_prefix != x ; then
- gtkmm_config_args="$gtkmm_config_args --exec-prefix=$gtkmm_config_exec_prefix"
- if test x${GTKMM_CONFIG+set} != xset ; then
- GTKMM_CONFIG=$gtkmm_config_exec_prefix/bin/gtkmm-config
- fi
- fi
- if test x$gtkmm_config_prefix != x ; then
- gtkmm_config_args="$gtkmm_config_args --prefix=$gtkmm_config_prefix"
- if test x${GTKMM_CONFIG+set} != xset ; then
- GTKMM_CONFIG=$gtkmm_config_prefix/bin/gtkmm-config
- fi
- fi
-
-
-
-
-# Configure paths for GTK--DRAW
-# Derek Quinn Wyatt 98-08-21 (adapted from Jan Nieuwenhuizen's code)
-
-
-
-
-
-
# Guess values for system-dependent variables and create Makefiles.
# Generated automatically using autoconf version 2.13
# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
ac_default_prefix=/usr/local
# Any additions from configure.in:
ac_help="$ac_help
- enable-config=FILE put configure settings in config-FILE.make"
+ --enable-config=CONF put settings in config-CONF.make and config-CONF.h;
+ do \`make conf=CONF' to get output in ./out-CONF"
ac_help="$ac_help
- with-localedir=LOCALE use LOCALE as locale dir. Default: PREFIX/share/locale "
+ --with-localedir=LOCALE use LOCALE as locale dir. Default:
+ PREFIX/share/locale "
ac_help="$ac_help
- with-lang=LANG use LANG as language to emit messages"
+ --with-lang=LANG use LANG as language to emit messages"
# Initialize some variables set by options.
# The variables have the same names as the options, with
fi
stepmake=`echo ${stepmake} | sed "s!\\\${prefix}!$presome!"`
+ # urg, how is this supposed to work?
+ if test "$program_prefix" = "NONE"; then
+ program_prefix=
+ fi
+ if test "$program_suffix" = "NONE"; then
+ program_suffix=
+ fi
+
echo $ac_n "checking Package""... $ac_c" 1>&6
-echo "configure:613: checking Package" >&5
+echo "configure:566: checking Package" >&5
if test "x$PACKAGE" = "xSTEPMAKE"; then
echo "$ac_t""Stepmake package!" 1>&6
- (cd stepmake; rm -f stepmake; ln -s ../stepmake .)
- (cd stepmake; rm -f bin; ln -s ../bin .)
+
+ echo $ac_n "checking builddir""... $ac_c" 1>&6
+echo "configure:571: checking builddir" >&5
+ if test "$srcdir" = "."; then
+ builddir=.
+ else
+ absolute_builddir="`pwd`"
+ package_absolute_builddir="`dirname $absolute_builddir`"
+ package_srcdir="`dirname $srcdir`"
+ builddir="`dirname $package_srcdir`/`basename $package_absolute_builddir`/`basename $absolute_builddir`"
+ fi
+ echo "$ac_t""$builddir" 1>&6
+
+ (cd stepmake 2>/dev/null || mkdir stepmake)
+ (cd stepmake; rm -f bin; ln -s ../$srcdir/bin .)
ac_aux_dir=
for ac_dir in bin $srcdir/bin; do
if test -f $ac_dir/install-sh; then
stepmake=stepmake
else
echo "$ac_t""$PACKAGE" 1>&6
+
+ echo $ac_n "checking builddir""... $ac_c" 1>&6
+echo "configure:608: checking builddir" >&5
+ if test "$srcdir" = "."; then
+ builddir=.
+ srcdir_build=no
+ else
+ absolute_builddir="`pwd`"
+# builddir="`dirname $srcdir`/`basename $absolute_builddir`"
+ builddir="`bash $srcdir/buildscripts/walk.sh \"$srcdir\"`"
+ srcdir_build=yes
+ fi
+ echo "$ac_t""$builddir" 1>&6
+ if expr "$srcdir" : '/' > /dev/null 2>&1; then
+ absolute_srcdir=yes
+
+ echo "configure: warning: Absolute --srcdir specified: $srcdir" 1>&2
+ warn_b=yes
+
+ fi
+
echo $ac_n "checking for stepmake""... $ac_c" 1>&6
-echo "configure:641: checking for stepmake" >&5
+echo "configure:628: checking for stepmake" >&5
# Check for installed stepmake
if test -d $stepmake; then
echo "$ac_t""$stepmake" 1>&6
else
- stepmake='$(depth)'/stepmake
- echo "$ac_t""./stepmake ($datadir/stepmake not found)" 1>&6
+ if test "$absolute_srcdir" != "yes"; then
+ stepmake='$(depth)'/$srcdir/stepmake
+ else
+ stepmake=$srcdir/stepmake
+ fi
+ echo "$ac_t""$srcdir/stepmake ($datadir/stepmake not found)" 1>&6
fi
+
ac_aux_dir=
for ac_dir in \
$HOME/usr/local/share/stepmake/bin\
/usr/share/stepmake/bin\
/usr/lib/stepmake/bin\
stepmake/bin\
+ $srcdir/stepmake/bin\
$srcdir/\
$HOME/usr/local/share/stepmake/bin\
$HOME/usr/local/lib/stepmake/bin\
/usr/share/stepmake/bin\
/usr/lib/stepmake/bin\
stepmake/bin\
+ $srcdir/stepmake/bin\
; do
if test -f $ac_dir/install-sh; then
ac_aux_dir=$ac_dir
/usr/share/stepmake/bin\
/usr/lib/stepmake/bin\
stepmake/bin\
+ $srcdir/stepmake/bin\
$srcdir/\
$HOME/usr/local/share/stepmake/bin\
$HOME/usr/local/lib/stepmake/bin\
/usr/share/stepmake/bin\
/usr/lib/stepmake/bin\
stepmake/bin\
+ $srcdir/stepmake/bin\
" 1>&2; exit 1; }
fi
ac_config_guess=$ac_aux_dir/config.guess
+
cat >> confdefs.h <<EOF
#define PACKAGE "${PACKAGE_NAME}"
EOF
AUTOGENERATE="This file was automatically generated by configure"
- absolute_builddir="`pwd`"
-
-
- STATE_VECTOR=`ls make/STATE-VECTOR 2>/dev/null`
- if test "x$STATE_VECTOR" != "x"; then
- STATE_VECTOR="\$(depth)/$STATE_VECTOR"
- fi
-
CONFIGSUFFIX=
# Check whether --enable-config or --disable-config was given.
if test "${enable_config+set}" = set; then
enableval="$enable_config"
- CONFIGSUFFIX=$enableval
+ CONFIGURATION=$enableval
fi
- if test "$CONFIGSUFFIX" != "" ; then
- CONFIGFILE=config-$CONFIGSUFFIX
- else
- CONFIGFILE=config
- fi
+ ##'
+
+ test -n "$CONFIGURATION" && CONFIGSUFFIX="-$CONFIGURATION"
+ CONFIGFILE=config$CONFIGSUFFIX
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:764: checking host system type" >&5
+echo "configure:752: checking host system type" >&5
host_alias=$host
case "$host_alias" in
host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6
+
for ac_prog in gmake make
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:789: checking for $ac_word" >&5
+echo "configure:778: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_MAKE'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
test -n "$MAKE" && break
done
-test -n "$MAKE" || MAKE="error"
+test -n "$MAKE" || MAKE="no"
+
+
+ #if test "`eval echo '$'"MAKE"`" = "no"; then
+
+ r="`eval echo '$'"MAKE"`"
+ if test -n "$r" -a "$r" != "error" -a "$r" != "no" && ! expr '`eval echo '$'"MAKE"`' : '.*\(echo\)' > /dev/null; then
+ ##STEPMAKE_WARN(cannot find . )
+ false
+ else
+ true
+ fi
+
+ if test $? -ne 0; then
+
+ eval "REQUIRED"=\"`eval echo \"'$'REQUIRED\" \"gmake make\"`\"
+ if test "REQUIRED" = "REQUIRED"; then
+ command="echo ERROR: gmake make not found"
+ # abort configure process here?
+ else
+ command="- echo gmake make not found"
+ fi
+ eval "MAKE"='$command'
+ false
+ else
+ true
+ fi
+
+
+
for ac_prog in find
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:824: checking for $ac_word" >&5
+echo "configure:842: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_FIND'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
test -n "$FIND" && break
done
-test -n "$FIND" || FIND="error"
+test -n "$FIND" || FIND="no"
+
+ #if test "`eval echo '$'"FIND"`" = "no"; then
+
+ r="`eval echo '$'"FIND"`"
+ if test -n "$r" -a "$r" != "error" -a "$r" != "no" && ! expr '`eval echo '$'"FIND"`' : '.*\(echo\)' > /dev/null; then
+ ##STEPMAKE_WARN(cannot find . )
+ false
+ else
+ true
+ fi
+ if test $? -ne 0; then
+
+ eval "REQUIRED"=\"`eval echo \"'$'REQUIRED\" \"find\"`\"
+
+ if test "REQUIRED" = "REQUIRED"; then
+ command="echo ERROR: find not found"
+ # abort configure process here?
+ else
+ command="- echo find not found"
+ fi
+ eval "FIND"='$command'
+ false
+ else
+ true
+ fi
+
+
+
for ac_prog in tar
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:861: checking for $ac_word" >&5
+echo "configure:907: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_TAR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
test -n "$TAR" && break
done
-test -n "$TAR" || TAR="error"
+test -n "$TAR" || TAR="no"
+
+
+ #if test "`eval echo '$'"TAR"`" = "no"; then
+
+ r="`eval echo '$'"TAR"`"
+ if test -n "$r" -a "$r" != "error" -a "$r" != "no" && ! expr '`eval echo '$'"TAR"`' : '.*\(echo\)' > /dev/null; then
+ ##STEPMAKE_WARN(cannot find . )
+ false
+ else
+ true
+ fi
+
+ if test $? -ne 0; then
+
+ eval "REQUIRED"=\"`eval echo \"'$'REQUIRED\" \"tar\"`\"
+
+ if test "REQUIRED" = "REQUIRED"; then
+ command="echo ERROR: tar not found"
+ # abort configure process here?
+ else
+ command="- echo tar not found"
+ fi
+ eval "TAR"='$command'
+ false
+ else
+ true
+ fi
+
if test "x`uname`" = "xHP-UX"; then
# Extract the first word of "bash", so it can be a program name with args.
set dummy bash; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:896: checking for $ac_word" >&5
+echo "configure:970: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_BASH'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "bash", so it can be a program name with args.
set dummy bash; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:936: checking for $ac_word" >&5
+echo "configure:1010: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_SHELL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "bash", so it can be a program name with args.
set dummy bash; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:973: checking for $ac_word" >&5
+echo "configure:1047: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_BASH'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
+
+ for ac_prog in python
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1090: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_PYTHON'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$PYTHON"; then
+ ac_cv_prog_PYTHON="$PYTHON" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_PYTHON="$ac_prog"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+PYTHON="$ac_cv_prog_PYTHON"
+if test -n "$PYTHON"; then
+ echo "$ac_t""$PYTHON" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+test -n "$PYTHON" && break
+done
+test -n "$PYTHON" || PYTHON="no"
+
+
+ #if test "`eval echo '$'"PYTHON"`" = "no"; then
+
+ r="`eval echo '$'"PYTHON"`"
+ if test -n "$r" -a "$r" != "error" -a "$r" != "no" && ! expr '`eval echo '$'"PYTHON"`' : '.*\(echo\)' > /dev/null; then
+ ##STEPMAKE_WARN(cannot find . )
+ false
+ else
+ true
+ fi
+
+ if test $? -ne 0; then
+
+ eval "REQUIRED"=\"`eval echo \"'$'REQUIRED\" \"python\"`\"
+
+ if test "REQUIRED" = "REQUIRED"; then
+ command="echo ERROR: python not found"
+ # abort configure process here?
+ else
+ command="- echo python not found"
+ fi
+ eval "PYTHON"='$command'
+ false
+ else
+ true
+ fi
- # Extract the first word of "${PYTHON:-python}", so it can be a program name with args.
-set dummy ${PYTHON:-python}; ac_word=$2
+# if ! expr '`eval echo '$'"PYTHON"`' : '.*\(echo\)' > /dev/null; then
+ if test $? -ne 0; then
+ # Extract the first word of "python", so it can be a program name with args.
+set dummy python; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1014: checking for $ac_word" >&5
+echo "configure:1152: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_PYTHON'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_path_PYTHON" && ac_cv_path_PYTHON="-echo no python"
;;
esac
fi
echo "$ac_t""no" 1>&6
fi
-
+ fi
- if test $MAKE != "error" ; then
- $MAKE -v 2> /dev/null | grep GNU > /dev/null
- if test "$?" = 1
- then
-
- echo "configure: warning: Please install *GNU* make" 1>&2
- warn_b=yes
-
- fi
- fi
-
- result="`echo \"$PYTHON\" | grep echo`"
- if test "x$PYTHON" = "xerror" -o "x$result" != "x"; then
-
- echo "configure: warning: can\'t find python. You should install Python" 1>&2
+ if expr "$MAKE" : '.*\(echo\)' >/dev/null; then
+ $MAKE -v 2> /dev/null | grep GNU > /dev/null
+ if test "$?" = 1; then
+ warn='make (Please install *GNU* make)'
+
+ echo "configure: warning: $warn" 1>&2
warn_b=yes
- fi
+
+ eval "REQUIRED"=\"`eval echo \"'$'REQUIRED\" \"$warn\"`\"
+ fi
+ fi
- if test "x$OSTYPE" = "xcygwin32" || test "x$OSTYPE" = "xWindows_NT"; then
+ if test "$OSTYPE" = "cygwin" -o "$OSTYPE" = "Windows_NT"; then
LN=cp # hard link does not work under cygnus-nt
LN_S='cp -r' # symbolic link does not work for native nt
ZIP="zip -r -9" #
- DOTEXE=.exe
- # urg
- # DIRSEP='\\'
- # PATHSEP=';'
- #
- # cygwin fixes all these things.
- # it seems these were used because of dos-style TEXINPUTS and
- # MFINPUTS needed for miktex.
- # but this breaks parsing of all other cygwin/unix style paths.
- #
- # if your (mik)tex breaks, make a:
- # /usr/local/bin/tex:
- # #!/bin/sh
- # TEXINPUTS=`cygpath -pw $TEXINPUTS` /texmf/miktex/bin/tex
- #
- # and
- #
- # /usr/local/bin/mf:
- # #!/bin/sh
- # MFINPUTS=`cygpath -pw $MFINPUTS` /texmf/miktex/bin/mf
- #
- # this way, you may have buildscripts/out/lilypond-profile
- # 'automatically' sourced from /usr/etc/profile.d/ too.
- #
+ program_suffix=.exe
+ ROOTSEP=':'
DIRSEP='/'
PATHSEP=':'
INSTALL="\$(SHELL) \$(stepdir)/../bin/install-dot-exe.sh -c"
else
+ ROOTSEP=':'
DIRSEP='/'
PATHSEP=':'
LN=ln
+
cat >> confdefs.h <<EOF
#define DIRSEP '${DIRSEP}'
EOF
-
if test "$datadir" = "\${prefix}/share"; then
datadir='${prefix}/share/'$package
presome=${ac_default_prefix}
fi
DIR_DATADIR=`echo ${DIR_DATADIR} | sed "s!\\\${prefix}!$presome!"`
+
+
+
cat >> confdefs.h <<EOF
#define DIR_DATADIR "${DIR_DATADIR}"
EOF
# AC_CONFIG_SUBDIRS(stepmake)
# Uncomment the configuration options your package needs.
-# AC_STEPMAKE_COMPILE
+# STEPMAKE_COMPILE
# AC_HAVE_HEADERS(limits.h malloc.h string.h unistd.h values.h)
-# AC_STEPMAKE_CXX
-# AC_STEPMAKE_GXX
-# AC_STEPMAKE_CXXTEMPLATE
-# AC_STEPMAKE_LEXYACC
-# AC_STEPMAKE_LIB
-# AC_STEPMAKE_LIBTOOL
+# STEPMAKE_CXX
+# STEPMAKE_GXX
+# STEPMAKE_CXXTEMPLATE
+# STEPMAKE_LEXYACC
+# STEPMAKE_LIB
+# STEPMAKE_LIBTOOL
lang=English
ALL_LINGUAS="en nl"
echo $ac_n "checking language""... $ac_c" 1>&6
-echo "configure:1181: checking language" >&5
+echo "configure:1294: checking language" >&5
case "$language" in
En* | en* | Am* | am* | US* | us*)
lang=English;;
fi
-# AC_STEPMAKE_GETTEXT
-# AC_STEPMAKE_MAN
-# AC_STEPMAKE_MSGFMT
-# AC_STEPMAKE_TEXMF
-# AC_STEPMAKE_TEXMF_DIRS
-
- if test "x$YODL" = "x"; then
- for ac_prog in striproff
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1214: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_STRIPROFF'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$STRIPROFF"; then
- ac_cv_prog_STRIPROFF="$STRIPROFF" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_STRIPROFF="$ac_prog"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-STRIPROFF="$ac_cv_prog_STRIPROFF"
-if test -n "$STRIPROFF"; then
- echo "$ac_t""$STRIPROFF" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-test -n "$STRIPROFF" && break
-done
-test -n "$STRIPROFF" || STRIPROFF="-echo no striproff"
-
- for ac_prog in yodl
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1249: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_YODL'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$YODL"; then
- ac_cv_prog_YODL="$YODL" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_YODL="$ac_prog"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-YODL="$ac_cv_prog_YODL"
-if test -n "$YODL"; then
- echo "$ac_t""$YODL" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-test -n "$YODL" && break
-done
-test -n "$YODL" || YODL="-echo no yodl"
-
- for ac_prog in yodl2html
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1284: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_YODL2HTML'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$YODL2HTML"; then
- ac_cv_prog_YODL2HTML="$YODL2HTML" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_YODL2HTML="$ac_prog"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-YODL2HTML="$ac_cv_prog_YODL2HTML"
-if test -n "$YODL2HTML"; then
- echo "$ac_t""$YODL2HTML" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-test -n "$YODL2HTML" && break
-done
-test -n "$YODL2HTML" || YODL2HTML="-echo no yodl"
-
- for ac_prog in yodl2latex
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1319: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_YODL2LATEX'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$YODL2LATEX"; then
- ac_cv_prog_YODL2LATEX="$YODL2LATEX" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_YODL2LATEX="$ac_prog"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-YODL2LATEX="$ac_cv_prog_YODL2LATEX"
-if test -n "$YODL2LATEX"; then
- echo "$ac_t""$YODL2LATEX" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-test -n "$YODL2LATEX" && break
-done
-
- for ac_prog in yodl2man
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1353: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_YODL2MAN'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$YODL2MAN"; then
- ac_cv_prog_YODL2MAN="$YODL2MAN" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_YODL2MAN="$ac_prog"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-YODL2MAN="$ac_cv_prog_YODL2MAN"
-if test -n "$YODL2MAN"; then
- echo "$ac_t""$YODL2MAN" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-test -n "$YODL2MAN" && break
-done
-test -n "$YODL2MAN" || YODL2MAN="-echo no yodl"
-
- for ac_prog in yodl2msless
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1388: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_YODL2MSLESS'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$YODL2MSLESS"; then
- ac_cv_prog_YODL2MSLESS="$YODL2MSLESS" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_YODL2MSLESS="$ac_prog"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-YODL2MSLESS="$ac_cv_prog_YODL2MSLESS"
-if test -n "$YODL2MSLESS"; then
- echo "$ac_t""$YODL2MSLESS" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-test -n "$YODL2MSLESS" && break
-done
-test -n "$YODL2MSLESS" || YODL2MSLESS="-echo no yodl"
-
- for ac_prog in yodl2texinfo
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1423: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_YODL2TEXINFO'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$YODL2TEXINFO"; then
- ac_cv_prog_YODL2TEXINFO="$YODL2TEXINFO" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_YODL2TEXINFO="$ac_prog"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-YODL2TEXINFO="$ac_cv_prog_YODL2TEXINFO"
-if test -n "$YODL2TEXINFO"; then
- echo "$ac_t""$YODL2TEXINFO" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-test -n "$YODL2TEXINFO" && break
-done
-test -n "$YODL2TEXINFO" || YODL2TEXINFO="-echo no yodl"
-
- for ac_prog in yodl2txt
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1458: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_YODL2TXT'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$YODL2TXT"; then
- ac_cv_prog_YODL2TXT="$YODL2TXT" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_YODL2TXT="$ac_prog"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-YODL2TXT="$ac_cv_prog_YODL2TXT"
-if test -n "$YODL2TXT"; then
- echo "$ac_t""$YODL2TXT" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-test -n "$YODL2TXT" && break
-done
-test -n "$YODL2TXT" || YODL2TXT="-echo no yodl"
-
- YODL2LESS_DIR='$(bindir)/'
- else
-
-
-
-
-
-
-
-
-
- export STRIPROFF YODL YODL2HTML YODL2LATEX YODL2MAN YODL2MSLESS YODL2TEXINFO YODL2TXT
- fi
- if test "x$YODL" = "-echo no yodl"; then
-
- echo "configure: warning: Did not find YODL (Yodl is Yet Oneother Document Language, see http://www.cs.uu.nl/~hanwen/yodl)" 1>&2
- warn_b=yes
-
- fi
-
+# STEPMAKE_GETTEXT
+# STEPMAKE_MAN
+# STEPMAKE_MSGFMT
+# STEPMAKE_TEXMF
+# STEPMAKE_TEXMF_DIRS
# AM_PATH_GTK(1.0.0,,AC_MSG_ERROR([please install proper version of gtk]))
# AM_PATH_GTK__(0.9.4,,AC_MSG_ERROR([please install proper version of gtk--]))
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1517: checking for $ac_word" >&5
+echo "configure:1329: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_MAKEINFO'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
done
test -n "$MAKEINFO" || MAKEINFO="error"
-# AC_CHECK_SEARCH_RESULT($YODL2TEXINFO, yodl,
-# You should install Yodl 1.30.pre6 or better)
+
+
+
trap '' 1 2 15
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
ac_given_srcdir=$srcdir
-trap 'rm -fr `echo "$CONFIGFILE.make:config.make.in $CONFIGFILE.hh:config.hh.in" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+trap 'rm -fr `echo "$CONFIGFILE.make:config.make.in $CONFIGFILE.h:config.hh.in" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
EOF
cat >> $CONFIG_STATUS <<EOF
s%@oldincludedir@%$oldincludedir%g
s%@infodir@%$infodir%g
s%@mandir@%$mandir%g
+s%@builddir@%$builddir%g
s%@stepmake@%$stepmake%g
s%@package@%$package%g
s%@PACKAGE@%$PACKAGE%g
s%@PACKAGE_NAME@%$PACKAGE_NAME%g
s%@package_depth@%$package_depth%g
s%@AUTOGENERATE@%$AUTOGENERATE%g
-s%@absolute_builddir@%$absolute_builddir%g
-s%@STATE_VECTOR@%$STATE_VECTOR%g
s%@CONFIGSUFFIX@%$CONFIGSUFFIX%g
s%@host@%$host%g
s%@host_alias@%$host_alias%g
s%@TAR@%$TAR%g
s%@BASH@%$BASH%g
s%@PYTHON@%$PYTHON%g
-s%@DOTEXE@%$DOTEXE%g
+s%@program_prefix@%$program_prefix%g
+s%@program_suffix@%$program_suffix%g
s%@ZIP@%$ZIP%g
s%@LN@%$LN%g
s%@LN_S@%$LN_S%g
s%@PATHSEP@%$PATHSEP%g
s%@DIRSEP@%$DIRSEP%g
s%@DIR_DATADIR@%$DIR_DATADIR%g
-s%@STRIPROFF@%$STRIPROFF%g
-s%@YODL@%$YODL%g
-s%@YODL2HTML@%$YODL2HTML%g
-s%@YODL2LATEX@%$YODL2LATEX%g
-s%@YODL2MAN@%$YODL2MAN%g
-s%@YODL2MSLESS@%$YODL2MSLESS%g
-s%@YODL2TEXINFO@%$YODL2TEXINFO%g
-s%@YODL2TXT@%$YODL2TXT%g
-s%@YODL2LESS_DIR@%$YODL2LESS_DIR%g
s%@MAKEINFO@%$MAKEINFO%g
+s%@OPTIONAL@%$OPTIONAL%g
+s%@REQUIRED@%$REQUIRED%g
CEOF
EOF
if test "${CONFIG_HEADERS+set}" != set; then
EOF
cat >> $CONFIG_STATUS <<EOF
- CONFIG_HEADERS="$CONFIGFILE.hh:config.hh.in"
+ CONFIG_HEADERS="$CONFIGFILE.h:config.hh.in"
EOF
cat >> $CONFIG_STATUS <<\EOF
fi
test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
- rm -f GNUmakefile
- cp make/toplevel.make.in ./GNUmakefile
- chmod 444 GNUmakefile
+
+ if test -n "$OPTIONAL"; then
+ echo
+ echo "WARNING: Please consider installing optional programs: $OPTIONAL"
+ fi
+
+ if test -n "$REQUIRED"; then
+ echo
+ echo "ERROR: Please install required programs: $REQUIRED"
+ fi
+
+ if test -n "$OPTIONAL$REQUIRED"; then
+ echo
+ echo "See INSTALL.txt for more information on how to build $PACKAGE_NAME"
+ echo "Remove config.cache before rerunning ./configure"
+ fi
+
+ if test -n "$REQUIRED"; then
+ rm -f $srcdir/GNUmakefile
+ exit 1
+ fi
+
+ # regular in-place build
+ # test for srcdir_build = yes ?
+ if test "$builddir" = "."; then
+ rm -f $srcdir/GNUmakefile
+ cp $srcdir/GNUmakefile.in $srcdir/GNUmakefile
+ chmod 444 $srcdir/GNUmakefile
+ else # --srcdir build
+ rm -f GNUmakefile
+ cp $srcdir/make/srcdir.make.in GNUmakefile
+ chmod 444 GNUmakefile
+ fi
projects / lilypond.git / blobdiff