#! /bin/sh
+ac_help="$ac_help
+ --with-gtkmm-prefix=PREFIX
+ Prefix where GTK-- is installed (optional)"
+# Check whether --with-gtkmm-prefix or --without-gtkmm-prefix was given.
+if test "${with_gtkmm_prefix+set}" = set; then
+ withval="$with_gtkmm_prefix"
+ gtkmm_config_prefix="$withval"
+else
+ gtkmm_config_prefix=""
+fi
+
+ac_help="$ac_help
+ --with-gtkmm-exec-prefix=PREFIX
+ Exec prefix where GTK-- is installed (optional)"
+# Check whether --with-gtkmm-exec-prefix or --without-gtkmm-exec-prefix was given.
+if test "${with_gtkmm_exec_prefix+set}" = set; then
+ withval="$with_gtkmm_exec_prefix"
+ gtkmm_config_exec_prefix="$withval"
+else
+ gtkmm_config_exec_prefix=""
+fi
+
+ac_help="$ac_help
+ --disable-gtkmmtest Do not try to compile and run a test GTK-- program"
+# Check whether --enable-gtkmmtest or --disable-gtkmmtest was given.
+if test "${enable_gtkmmtest+set}" = set; then
+ enableval="$enable_gtkmmtest"
+ :
+else
+ enable_gtkmmtest=yes
+fi
+
+
+ if test x$gtkmm_config_exec_prefix != x ; then
+ gtkmm_config_args="$gtkmm_config_args --exec-prefix=$gtkmm_config_exec_prefix"
+ if test x${GTKMM_CONFIG+set} != xset ; then
+ GTKMM_CONFIG=$gtkmm_config_exec_prefix/bin/gtkmm-config
+ fi
+ fi
+ if test x$gtkmm_config_prefix != x ; then
+ gtkmm_config_args="$gtkmm_config_args --prefix=$gtkmm_config_prefix"
+ if test x${GTKMM_CONFIG+set} != xset ; then
+ GTKMM_CONFIG=$gtkmm_config_prefix/bin/gtkmm-config
+ fi
+ fi
+
+
+
+
+# Configure paths for GTK--DRAW
+# Derek Quinn Wyatt 98-08-21 (adapted from Jan Nieuwenhuizen's code)
+
+
# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.12
+# Generated automatically using autoconf version 2.13
# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
# Initialize some other variables.
subdirs=
MFLAGS= MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
# Maximum number of lines to put in a shell here document.
ac_max_here_lines=12
verbose=yes ;;
-version | --version | --versio | --versi | --vers)
- echo "configure generated by autoconf version 2.12"
+ echo "configure generated by autoconf version 2.13"
exit 0 ;;
-with-* | --with-*)
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross
+ac_exeext=
+ac_objext=o
if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
# Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
PACKAGE=`echo $PACKAGE_NAME | tr '[a-z]' '[A-Z]'`
package=`echo $PACKAGE_NAME | tr '[A-Z]' '[a-z]'`
+ # No versioning on directory names of sub-packages
+ # urg, urg
+ stepmake=${datadir}/stepmake
+ presome=${prefix}
+ if test "$prefix" = "NONE"; then
+ presome=${ac_default_prefix}
+ fi
+ stepmake=`echo ${stepmake} | sed "s!\\\${prefix}!$presome!"`
+
+ # urg, how is this supposed to work?
+ if test "$program_prefix" = "NONE"; then
+ program_prefix=
+ fi
+ if test "$program_suffix" = "NONE"; then
+ program_suffix=
+ fi
+
+ echo $ac_n "checking Package""... $ac_c" 1>&6
+echo "configure:617: checking Package" >&5
if test "x$PACKAGE" = "xSTEPMAKE"; then
- echo Stepmake package!
- (cd stepmake; rm -f stepmake; ln -s ../stepmake .)
- (cd stepmake; rm -f bin; ln -s ../bin .)
+ echo "$ac_t""Stepmake package!" 1>&6
+
+ #if test "x$builddir" != "x"; then
+ # builddir="../$builddir"
+ #else
+ # builddir=..
+ #fi
+ if test "$srcdir" != "."; then
+ absolute_builddir="`pwd`"
+ package_absolute_builddir="`dirname $absolute_builddir`"
+ package_srcdir="`dirname $srcdir`"
+ builddir="`dirname $package_srcdir`/`basename $package_absolute_builddir`/`basename $absolute_builddir`"
+ else
+ builddir=.
+ fi
+
+ (cd stepmake 2>/dev/null || mkdir stepmake)
+ (cd stepmake; rm -f stepmake; ln -s ../$srcdir/stepmake .)
+ (cd stepmake; rm -f bin; ln -s ../$srcdir/bin .)
ac_aux_dir=
for ac_dir in bin $srcdir/bin; do
if test -f $ac_dir/install-sh; then
ac_config_sub=$ac_aux_dir/config.sub
ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+ stepmake=stepmake
else
- echo Package: $PACKAGE
+ echo "$ac_t""$PACKAGE" 1>&6
+
+ if test "$srcdir" != "."; then
+ absolute_builddir="`pwd`"
+ builddir="`dirname $srcdir`/`basename $absolute_builddir`"
+ else
+ builddir=.
+ fi
+
+ echo $ac_n "checking for stepmake""... $ac_c" 1>&6
+echo "configure:669: checking for stepmake" >&5
+ # Check for installed stepmake
+ if test -d $stepmake; then
+ echo "$ac_t""$stepmake" 1>&6
+ else
+ stepmake='$(depth)'/$srcdir/stepmake
+ echo "$ac_t""$srcdir/stepmake ($datadir/stepmake not found)" 1>&6
+ fi
ac_aux_dir=
-for ac_dir in stepmake/bin $srcdir/stepmake/bin; do
+for ac_dir in \
+ $HOME/usr/local/share/stepmake/bin\
+ $HOME/usr/local/lib/stepmake/bin\
+ $HOME/usr/share/stepmake/bin\
+ $HOME/usr/lib/stepmake/bin\
+ /usr/local/share/stepmake/bin\
+ /usr/local/lib/stepmake/bin\
+ /usr/share/stepmake/bin\
+ /usr/lib/stepmake/bin\
+ stepmake/bin\
+ $srcdir/stepmake/bin\
+ $srcdir/\
+ $HOME/usr/local/share/stepmake/bin\
+ $HOME/usr/local/lib/stepmake/bin\
+ $HOME/usr/share/stepmake/bin\
+ $HOME/usr/lib/stepmake/bin\
+ /usr/local/share/stepmake/bin\
+ /usr/local/lib/stepmake/bin\
+ /usr/share/stepmake/bin\
+ /usr/lib/stepmake/bin\
+ stepmake/bin\
+ $srcdir/stepmake/bin\
+ ; do
if test -f $ac_dir/install-sh; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install-sh -c"
fi
done
if test -z "$ac_aux_dir"; then
- { echo "configure: error: can not find install-sh or install.sh in stepmake/bin $srcdir/stepmake/bin" 1>&2; exit 1; }
+ { echo "configure: error: can not find install-sh or install.sh in \
+ $HOME/usr/local/share/stepmake/bin\
+ $HOME/usr/local/lib/stepmake/bin\
+ $HOME/usr/share/stepmake/bin\
+ $HOME/usr/lib/stepmake/bin\
+ /usr/local/share/stepmake/bin\
+ /usr/local/lib/stepmake/bin\
+ /usr/share/stepmake/bin\
+ /usr/lib/stepmake/bin\
+ stepmake/bin\
+ $srcdir/stepmake/bin\
+ $srcdir/\
+ $HOME/usr/local/share/stepmake/bin\
+ $HOME/usr/local/lib/stepmake/bin\
+ $HOME/usr/share/stepmake/bin\
+ $HOME/usr/lib/stepmake/bin\
+ /usr/local/share/stepmake/bin\
+ /usr/local/lib/stepmake/bin\
+ /usr/share/stepmake/bin\
+ /usr/lib/stepmake/bin\
+ stepmake/bin\
+ $srcdir/stepmake/bin\
+ " 1>&2; exit 1; }
fi
ac_config_guess=$ac_aux_dir/config.guess
ac_config_sub=$ac_aux_dir/config.sub
+
+
cat >> confdefs.h <<EOF
#define PACKAGE "${PACKAGE_NAME}"
EOF
EOF
- package_depth=`dirname $cache_file`
+ if test "$package_depth" = "" ; then
+ package_depth="."
+ else
+ package_depth="../$package_depth"
+ fi
+ export package_depth
AUTOGENERATE="This file was automatically generated by configure"
- absolute_builddir="`pwd`"
-
-
- # No versioning on directory names of sub-packages
- stepmake=stepmake
-
-
- STATE_VECTOR=`ls make/STATE-VECTOR 2>/dev/null`
- if test "x$STATE_VECTOR" != "x"; then
- STATE_VECTOR="\$(depth)/$STATE_VECTOR"
- fi
-
CONFIGSUFFIX=
# Check whether --enable-config or --disable-config was given.
if test "${enable_config+set}" = set; then
enableval="$enable_config"
- CONFIGSUFFIX=$enableval
+ CONFIGSUFFIX=-$enableval
fi
- if test "$CONFIGSUFFIX" != "" ; then
- CONFIGFILE=config-$CONFIGSUFFIX
- else
- CONFIGFILE=config
- fi
+ CONFIGFILE=config$CONFIGSUFFIX
# Make sure we can run config.sub.
-if $ac_config_sub sun4 >/dev/null 2>&1; then :
+if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:641: checking host system type" >&5
+echo "configure:785: checking host system type" >&5
host_alias=$host
case "$host_alias" in
NONE)
case $nonopt in
NONE)
- if host_alias=`$ac_config_guess`; then :
+ if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
fi ;;
*) host_alias=$nonopt ;;
esac ;;
esac
-host=`$ac_config_sub $host_alias`
+host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6
- for ac_prog in make
+ for ac_prog in gmake make
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:666: checking for $ac_word" >&5
+echo "configure:810: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_MAKE'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$MAKE"; then
ac_cv_prog_MAKE="$MAKE" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_MAKE="$ac_prog"
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:700: checking for $ac_word" >&5
+echo "configure:845: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_FIND'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$FIND"; then
ac_cv_prog_FIND="$FIND" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_FIND="$ac_prog"
-
for ac_prog in tar
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:737: checking for $ac_word" >&5
+echo "configure:882: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_TAR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$TAR"; then
ac_cv_prog_TAR="$TAR" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_TAR="$ac_prog"
done
test -n "$TAR" || TAR="error"
- for ac_prog in bash
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
+
+ if test "x`uname`" = "xHP-UX"; then
+ # Extract the first word of "bash", so it can be a program name with args.
+set dummy bash; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:771: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_BASH'+set}'`\" = set"; then
+echo "configure:917: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_BASH'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$BASH"; then
- ac_cv_prog_BASH="$BASH" # Let the user override the test.
+ case "$BASH" in
+ /*)
+ ac_cv_path_BASH="$BASH" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_BASH="$BASH" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_BASH="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_BASH" && ac_cv_path_BASH="/bin/sh"
+ ;;
+esac
+fi
+BASH="$ac_cv_path_BASH"
+if test -n "$BASH"; then
+ echo "$ac_t""$BASH" 1>&6
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
+ echo "$ac_t""no" 1>&6
+fi
+
+
+ echo "configure: warning: avoiding buggy /bin/sh" 1>&2
+ warn_b=yes
+
+ # Extract the first word of "bash", so it can be a program name with args.
+set dummy bash; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:957: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_SHELL'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$SHELL" in
+ /*)
+ ac_cv_path_SHELL="$SHELL" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_SHELL="$SHELL" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_BASH="$ac_prog"
+ ac_cv_path_SHELL="$ac_dir/$ac_word"
break
fi
done
IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_SHELL" && ac_cv_path_SHELL="/bin/ksh"
+ ;;
+esac
fi
+SHELL="$ac_cv_path_SHELL"
+if test -n "$SHELL"; then
+ echo "$ac_t""$SHELL" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ else
+ # Extract the first word of "bash", so it can be a program name with args.
+set dummy bash; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:994: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_BASH'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$BASH" in
+ /*)
+ ac_cv_path_BASH="$BASH" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_BASH="$BASH" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_BASH="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_BASH" && ac_cv_path_BASH="/bin/sh"
+ ;;
+esac
fi
-BASH="$ac_cv_prog_BASH"
+BASH="$ac_cv_path_BASH"
if test -n "$BASH"; then
echo "$ac_t""$BASH" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-test -n "$BASH" && break
-done
-test -n "$BASH" || BASH="/bin/sh"
+ SHELL=/bin/sh
+
+ fi
- # Extract the first word of "python", so it can be a program name with args.
-set dummy python; ac_word=$2
+ # Extract the first word of "${PYTHON:-python}", so it can be a program name with args.
+set dummy ${PYTHON:-python}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:804: checking for $ac_word" >&5
+echo "configure:1035: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_PYTHON'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
/*)
ac_cv_path_PYTHON="$PYTHON" # Let the user override the test with a path.
;;
+ ?:/*)
+ ac_cv_path_PYTHON="$PYTHON" # Let the user override the test with a dos path.
+ ;;
*)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_path_PYTHON="$ac_dir/$ac_word"
-
-
- result="`echo \"$MAKE\" | grep echo`"
- if test "x$MAKE" = "xerror" -o "x$result" != "x"; then
-
- echo "configure: warning: can\'t find GNU make. You should install GNU make" 1>&2
- warn_b=yes
-
- fi
-
if test $MAKE != "error" ; then
- $MAKE -v| grep GNU > /dev/null
+ $MAKE -v 2> /dev/null | grep GNU > /dev/null
if test "$?" = 1
then
echo "configure: warning: Please install *GNU* make" 1>&2
warn_b=yes
- fi
+ fi
fi
if test "x$OSTYPE" = "xcygwin32" || test "x$OSTYPE" = "xWindows_NT"; then
LN=cp # hard link does not work under cygnus-nt
- LN_S=cp # symbolic link does not work for native nt
+ LN_S='cp -r' # symbolic link does not work for native nt
ZIP="zip -r -9" #
- DOTEXE=.exe
- DIRSEP='\\'
- PATHSEP=';'
- INSTALL="\$(stepdir)/../bin/install-dot-exe.sh -c"
+ program_suffix=.exe
+ # urg
+ # DIRSEP='\\'
+ # PATHSEP=';'
+ #
+ # cygwin fixes all these things.
+ # it seems these were used because of dos-style TEXINPUTS and
+ # MFINPUTS needed for miktex.
+ # but this breaks parsing of all other cygwin/unix style paths.
+ #
+ # if your (mik)tex breaks, make a:
+ # /usr/local/bin/tex:
+ # #!/bin/sh
+ # TEXINPUTS=`cygpath -pw $TEXINPUTS` /texmf/miktex/bin/tex
+ #
+ # and
+ #
+ # /usr/local/bin/mf:
+ # #!/bin/sh
+ # MFINPUTS=`cygpath -pw $MFINPUTS` /texmf/miktex/bin/mf
+ #
+ # this way, you may have buildscripts/out/lilypond-profile
+ # 'automatically' sourced from /usr/etc/profile.d/ too.
+ #
+ DIRSEP='/'
+ PATHSEP=':'
+ INSTALL="\$(SHELL) \$(stepdir)/../bin/install-dot-exe.sh -c"
else
DIRSEP='/'
PATHSEP=':'
LN=ln
LN_S='ln -s'
ZIP="zip -r -9"
- INSTALL="\$(stepdir)/../bin/install-sh -c"
+ INSTALL="\$(SHELL) \$(stepdir)/../bin/install-sh -c"
fi
- cat >> confdefs.h <<EOF
+
+ cat >> confdefs.h <<EOF
#define DIRSEP '${DIRSEP}'
EOF
- cat >> confdefs.h <<EOF
+ cat >> confdefs.h <<EOF
#define PATHSEP '${PATHSEP}'
EOF
+
+
-
if test "$datadir" = "\${prefix}/share"; then
datadir='${prefix}/share/'$package
echo $ac_n "checking language""... $ac_c" 1>&6
-echo "configure:952: checking language" >&5
+echo "configure:1202: checking language" >&5
case "$language" in
En* | en* | Am* | am* | US* | us*)
lang=English;;
# AC_STEPMAKE_MAN
# AC_STEPMAKE_MSGFMT
# AC_STEPMAKE_TEXMF
-
- if test "x$YODL" = "x"; then
- for ac_prog in yodl
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:984: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_YODL'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$YODL"; then
- ac_cv_prog_YODL="$YODL" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_YODL="$ac_prog"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-YODL="$ac_cv_prog_YODL"
-if test -n "$YODL"; then
- echo "$ac_t""$YODL" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-test -n "$YODL" && break
-done
-test -n "$YODL" || YODL="-echo no yodl"
-
- for ac_prog in yodl2html
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1018: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_YODL2HTML'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$YODL2HTML"; then
- ac_cv_prog_YODL2HTML="$YODL2HTML" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_YODL2HTML="$ac_prog"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-YODL2HTML="$ac_cv_prog_YODL2HTML"
-if test -n "$YODL2HTML"; then
- echo "$ac_t""$YODL2HTML" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-test -n "$YODL2HTML" && break
-done
-test -n "$YODL2HTML" || YODL2HTML="-echo no yodl"
-
- for ac_prog in yodl2latex
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1052: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_YODL2LATEX'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$YODL2LATEX"; then
- ac_cv_prog_YODL2LATEX="$YODL2LATEX" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_YODL2LATEX="$ac_prog"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-YODL2LATEX="$ac_cv_prog_YODL2LATEX"
-if test -n "$YODL2LATEX"; then
- echo "$ac_t""$YODL2LATEX" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-test -n "$YODL2LATEX" && break
-done
-
- for ac_prog in yodl2man
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1085: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_YODL2MAN'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$YODL2MAN"; then
- ac_cv_prog_YODL2MAN="$YODL2MAN" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_YODL2MAN="$ac_prog"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-YODL2MAN="$ac_cv_prog_YODL2MAN"
-if test -n "$YODL2MAN"; then
- echo "$ac_t""$YODL2MAN" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-test -n "$YODL2MAN" && break
-done
-test -n "$YODL2MAN" || YODL2MAN="-echo no yodl"
-
- for ac_prog in yodl2msless
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1119: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_YODL2MSLESS'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$YODL2MSLESS"; then
- ac_cv_prog_YODL2MSLESS="$YODL2MSLESS" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_YODL2MSLESS="$ac_prog"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-YODL2MSLESS="$ac_cv_prog_YODL2MSLESS"
-if test -n "$YODL2MSLESS"; then
- echo "$ac_t""$YODL2MSLESS" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-test -n "$YODL2MSLESS" && break
-done
-test -n "$YODL2MSLESS" || YODL2MSLESS="-echo no yodl"
-
- for ac_prog in yodl2texinfo
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1153: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_YODL2TEXINFO'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$YODL2TEXINFO"; then
- ac_cv_prog_YODL2TEXINFO="$YODL2TEXINFO" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_YODL2TEXINFO="$ac_prog"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-YODL2TEXINFO="$ac_cv_prog_YODL2TEXINFO"
-if test -n "$YODL2TEXINFO"; then
- echo "$ac_t""$YODL2TEXINFO" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-test -n "$YODL2TEXINFO" && break
-done
-test -n "$YODL2TEXINFO" || YODL2TEXINFO="-echo no yodl"
-
- for ac_prog in yodl2txt
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1187: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_YODL2TXT'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$YODL2TXT"; then
- ac_cv_prog_YODL2TXT="$YODL2TXT" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_YODL2TXT="$ac_prog"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-YODL2TXT="$ac_cv_prog_YODL2TXT"
-if test -n "$YODL2TXT"; then
- echo "$ac_t""$YODL2TXT" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-test -n "$YODL2TXT" && break
-done
-test -n "$YODL2TXT" || YODL2TXT="-echo no yodl"
-
- else
-
-
-
-
-
-
-
- export YODL YODL2HTML YODL2LATEX YODL2MAN YODL2MSLESS YODL2TEXINFO YODL2TXT
- fi
- if test "x$YODL" = "-echo no yodl"; then
-
- echo "configure: warning: Did not find YODL (Yodl is Yet Oneother Document Language, see http://www.cs.uu.nl/~hanwen/yodl)" 1>&2
- warn_b=yes
-
- fi
-
+# AC_STEPMAKE_TEXMF_DIRS
# AM_PATH_GTK(1.0.0,,AC_MSG_ERROR([please install proper version of gtk]))
# AM_PATH_GTK__(0.9.4,,AC_MSG_ERROR([please install proper version of gtk--]))
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1242: checking for $ac_word" >&5
+echo "configure:1237: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_MAKEINFO'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$MAKEINFO"; then
ac_cv_prog_MAKEINFO="$MAKEINFO" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_MAKEINFO="$ac_prog"
done
test -n "$MAKEINFO" || MAKEINFO="error"
-# AC_CHECK_SEARCH_RESULT($YODL2TEXINFO, yodl,
-# You should install Yodl 1.30.pre6 or better)
trap '' 1 2 15
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
- case `(ac_space=' '; set) 2>&1` in
+ case `(ac_space=' '; set | grep ac_space) 2>&1` in
*ac_space=\ *)
# `set' does not quote correctly, so add quotes (double-quote substitution
# turns \\\\ into \\, and sed turns \\ into \).
echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-version | --version | --versio | --versi | --vers | --ver | --ve | --v)
- echo "$CONFIG_STATUS generated by autoconf version 2.12"
+ echo "$CONFIG_STATUS generated by autoconf version 2.13"
exit 0 ;;
-help | --help | --hel | --he | --h)
echo "\$ac_cs_usage"; exit 0 ;;
ac_given_srcdir=$srcdir
-trap 'rm -fr `echo "$CONFIGFILE.make:config.make.in $CONFIGFILE.hh:config.hh.in" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+trap 'rm -fr `echo "$CONFIGFILE.make:config.make.in $CONFIGFILE.h:config.hh.in" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
EOF
cat >> $CONFIG_STATUS <<EOF
s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
$ac_vpsub
$extrasub
+s%@SHELL@%$SHELL%g
s%@CFLAGS@%$CFLAGS%g
s%@CPPFLAGS@%$CPPFLAGS%g
s%@CXXFLAGS@%$CXXFLAGS%g
+s%@FFLAGS@%$FFLAGS%g
s%@DEFS@%$DEFS%g
s%@LDFLAGS@%$LDFLAGS%g
s%@LIBS@%$LIBS%g
s%@oldincludedir@%$oldincludedir%g
s%@infodir@%$infodir%g
s%@mandir@%$mandir%g
+s%@builddir@%$builddir%g
+s%@stepmake@%$stepmake%g
s%@package@%$package%g
s%@PACKAGE@%$PACKAGE%g
s%@PACKAGE_NAME@%$PACKAGE_NAME%g
s%@package_depth@%$package_depth%g
s%@AUTOGENERATE@%$AUTOGENERATE%g
-s%@absolute_builddir@%$absolute_builddir%g
-s%@stepmake@%$stepmake%g
-s%@STATE_VECTOR@%$STATE_VECTOR%g
s%@CONFIGSUFFIX@%$CONFIGSUFFIX%g
s%@host@%$host%g
s%@host_alias@%$host_alias%g
s%@TAR@%$TAR%g
s%@BASH@%$BASH%g
s%@PYTHON@%$PYTHON%g
-s%@DOTEXE@%$DOTEXE%g
+s%@program_prefix@%$program_prefix%g
+s%@program_suffix@%$program_suffix%g
s%@ZIP@%$ZIP%g
s%@LN@%$LN%g
s%@LN_S@%$LN_S%g
s%@INSTALL@%$INSTALL%g
+s%@PATHSEP@%$PATHSEP%g
+s%@DIRSEP@%$DIRSEP%g
s%@DIR_DATADIR@%$DIR_DATADIR%g
-s%@YODL@%$YODL%g
-s%@YODL2HTML@%$YODL2HTML%g
-s%@YODL2LATEX@%$YODL2LATEX%g
-s%@YODL2MAN@%$YODL2MAN%g
-s%@YODL2MSLESS@%$YODL2MSLESS%g
-s%@YODL2TEXINFO@%$YODL2TEXINFO%g
-s%@YODL2TXT@%$YODL2TXT%g
s%@MAKEINFO@%$MAKEINFO%g
CEOF
if test "${CONFIG_HEADERS+set}" != set; then
EOF
cat >> $CONFIG_STATUS <<EOF
- CONFIG_HEADERS="$CONFIGFILE.hh:config.hh.in"
+ CONFIG_HEADERS="$CONFIGFILE.h:config.hh.in"
EOF
cat >> $CONFIG_STATUS <<\EOF
fi
test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
- rm -f GNUmakefile
- cp make/toplevel.make.in ./GNUmakefile
- chmod 444 GNUmakefile
+ rm -f $srcdir/GNUmakefile
+ cp $srcdir/make/toplevel.make.in $srcdir/GNUmakefile
+ chmod 444 $srcdir/GNUmakefile
+ if test "$builddir" != "."; then
+ rm -f GNUmakefile
+ cp $srcdir/make/srcdir.make.in GNUmakefile
+ chmod 444 GNUmakefile
+ fi