#!@PYTHON@
# vim: set noexpandtab:
-# TODO:
-# * junk --outdir for --output
-# * Figure out clean set of options.
-# *
-# * EndLilyPondOutput is def'd as vfil. Causes large white gaps.
-# * texinfo: add support for @pagesize
-
-# todo: dimension handling (all the x2y) is clumsy. (tca: Thats
-# because the values are taken directly from texinfo.tex,
-# geometry.sty and article.cls. Give me a hint, and I'll
-# fix it.)
-#
-# TODO: magnification support should also work for texinfo -> html: eg. add as option to dvips.
-#
+"""
+
+ TODO:
+ * junk --outdir for--output
+ * Figure out clean set of options.
+ *
+ * texinfo: add support for @pagesize
+
+ todo: dimension handling (all the x2y) is clumsy. (tca: Thats
+ because the values are taken directly from texinfo.tex,
+ geometry.sty and article.cls. Give me a hint, and I'll
+ fix it.)
+
+
+ TODO: magnification support should also work for texinfo -> html: eg. add as option to dvips.
+
+
+
+ This is a slightly hairy program. The general approach is as follows
+ The input string is chopped up in chunks, i.e. , a list of tuples
+
+ with the format (TAG_STR, MAIN_STR, OPTIONS, TODO, BASE)
+
+ This list is built step by step: first ignore and verbatim commands
+ are handled, delivering a list of chunks.
+
+ then all chunks containing lilypond commands are chopped up
+
+ when all chunks have their final form, all bodies from lilypond blocks are
+ extracted, and if applicable, written do disk and run through lilypond.
+
-# This is was the idea for handling of comments:
+tags supported
+
+ ignore
+ lilypond
+ input
+ verb
+ verbatim
+ multicols
+ numcols
+
+
+
+
+"""
+
+# This is was the idea for handling of comments:
# Multiline comments, @ignore .. @end ignore is scanned for
# in read_doc_file, and the chunks are marked as 'ignore', so
# lilypond-book will not touch them any more. The content of the
# chunks are written to the output file. Also 'include' and 'input'
# regex has to check if they are commented out.
#
+
# Then it is scanned for 'lilypond', 'lilypond-file' and 'lilypond-block'.
# These three regex's has to check if they are on a commented line,
# % for latex, @c for texinfo.
# The the rest of the rexeces are searched for. They don't have to test
# if they are on a commented out line.
-
-
-import os
+import glob
import stat
import string
-import getopt
-import sys
-import __main__
-
-# Handle bug in Python 1.6-2.1
-#
-# there are recursion limits for some patterns in Python 1.6 til 2.1.
-# fix this by importing the 1.5.2 implementation pre instead. Fix by Mats.
-
-## We would like to do this for python 2.2 as well, unfortunately
-## python 2.2 has another bug, see Sf.net bugtracker
-##
-## https://sourceforge.net/tracker/?func=detail&aid=604803&group_id=5470&atid=105470
-##
+################################################################
+# Users of python modules should include this snippet
+# and customize variables below.
-##
-##
-##
+# We'll suffer this path init stuff as long as we don't install our
+# python packages in <prefix>/lib/pythonx.y (and don't kludge around
+# it as we do with teTeX on Red Hat Linux: set some environment var
+# (PYTHONPATH) in profile)
+# If set, LILYPONDPREFIX must take prevalence
+# if datadir is not set, we're doing a build and LILYPONDPREFIX
+import getopt, os, sys
+datadir = '@local_lilypond_datadir@'
+if not os.path.isdir (datadir):
+ datadir = '@lilypond_datadir@'
+if os.environ.has_key ('LILYPONDPREFIX') :
+ datadir = os.environ['LILYPONDPREFIX']
+ while datadir[-1] == os.sep:
+ datadir= datadir[:-1]
+sys.path.insert (0, os.path.join (datadir, 'python'))
+# Customize these
+#if __name__ == '__main__':
-if float (sys.version[0:3]) <= 2.1:
-## or sys.version[0:5] == '2.2.1':
-## still broken on python 2.2.1 / RH8.
-
- try:
- import pre
- re = pre
- del pre
- except ImportError:
- import re
-else:
- import re
-
-# Attempt to fix problems with limited stack size set by Python!
-# Sets unlimited stack size. Note that the resource module only
-# is available on UNIX.
-try:
- import resource
- resource.setrlimit (resource.RLIMIT_STACK, (-1, -1))
-except:
- pass
+import lilylib as ly
+global _;_=ly._
+global re;re = ly.re
-errorport = sys.stderr
+# lilylib globals
+program_name = 'lilypond-book'
verbose_p = 0
+pseudo_filter_p = 0
+original_dir = os.getcwd ()
+#temp_dir = os.path.join (original_dir, '%s.dir' % program_name)
+#urg
+temp_dir = '/tmp'
+keep_temp_dir_p = 0
+preview_resolution = 90
+
+## FIXME
+## ly2dvi: silly name?
+## do -P or -p by default?
+##help_summary = _ ("Run LilyPond using LaTeX for titling")
+help_summary = _ ("Process LilyPond snippets in hybrid html, LaTeX or texinfo document")
+copyright = ('Tom Cato Amundsen <tca@gnu.org>',
+ 'Han-Wen Nienhuys <hanwen@cs.uu.nl>')
+option_definitions = [
+ (_ ("EXT"), 'f', 'format', _ ("use output format EXT (texi [default], texi-html, latex, html)")),
+ (_ ("DIM"), '', 'default-music-fontsize', _ ("default fontsize for music. DIM is assumed to be in points")),
+ (_ ("DIM"), '', 'default-lilypond-fontsize', _ ("deprecated, use --default-music-fontsize")),
+ (_ ("OPT"), '', 'extra-options', _ ("pass OPT quoted to the lilypond command line")),
+ (_ ("DIM"), '', 'force-music-fontsize', _ ("force fontsize for all inline lilypond. DIM is assumed be to in points")),
+ (_ ("DIM"), '', 'force-lilypond-fontsize', _ ("deprecated, use --force-music-fontsize")),
+ ('', 'h', 'help', _ ("this help")),
+ (_ ("DIR"), 'I', 'include', _ ("include path")),
+ ('', 'M', 'dependencies', _ ("write dependencies")),
+ (_ ("PREF"), '', 'dep-prefix', _ ("prepend PREF before each -M dependency")),
+ ('', 'n', 'no-lily', _ ("don't run lilypond")),
+ ('', '', 'no-pictures', _ ("don't generate pictures")),
+ ('', '', 'no-music', _ ("strip all lilypond blocks from output")),
+ (_ ("FILE"), 'o', 'outname', _ ("filename main output file")),
+ (_ ("FILE"), '', 'outdir', _ ("where to place generated files")),
+ (_ ('RES'), '', 'preview-resolution',
+ _ ("set the resolution of the preview to RES")),
+ ('', 'V', 'verbose', _ ("verbose")),
+ ('', 'v', 'version', _ ("print version information")),
+ ('', 'w', 'warranty', _ ("show warranty and copyright")),
+ ]
+# format specific strings, ie. regex-es for input, and % strings for output
-try:
- import gettext
- gettext.bindtextdomain ('lilypond', localedir)
- gettext.textdomain ('lilypond')
- _ = gettext.gettext
-except:
- def _ (s):
- return s
+# global variables
-def progress (s):
- errorport.write (s + '\n')
+include_path = [os.getcwd ()]
-program_version = '@TOPLEVEL_VERSION@'
-if program_version == '@' + 'TOPLEVEL_VERSION' + '@':
- program_version = '1.6.0'
+#lilypond_binary = 'valgrind --suppressions=/home/hanwen/usr/src/guile-1.6.supp --num-callers=10 /home/hanwen/usr/src/lilypond/lily/out/lilypond'
-# if set, LILYPONDPREFIX must take prevalence
-# if datadir is not set, we're doing a build and LILYPONDPREFIX
-datadir = '@local_lilypond_datadir@'
+lilypond_binary = os.path.join ('@bindir@', 'lilypond')
-if os.environ.has_key ('LILYPONDPREFIX') :
- datadir = os.environ['LILYPONDPREFIX']
-else:
- datadir = '@local_lilypond_datadir@'
-
-while datadir[-1] == os.sep:
- datadir= datadir[:-1]
-
-kpse = os.popen ('kpsexpand \$TEXMF').read()
-kpse = re.sub('[ \t\n]+$','', kpse)
-type1_paths = os.popen ('kpsewhich -expand-path=\$T1FONTS').read ()
-
-binary = 'lilypond'
-#binary = 'valgrind --suppressions=/home/hanwen/usr/src/guile-1.6.supp --num-callers=10 /home/hanwen/usr/src/lilypond/lily/out/lilypond'
-environment = {
- # TODO: * prevent multiple addition.
- # * clean TEXINPUTS, MFINPUTS, TFMFONTS,
- # as these take prevalence over $TEXMF
- # and thus may break tex run?
- 'TEXMF' : "{%s,%s}" % (datadir, kpse) ,
- 'GS_FONTPATH' : type1_paths,
- 'GS_LIB' : datadir + '/ps',
-}
+# only use installed binary when we're installed too.
+if '@bindir@' == ('@' + 'bindir@') or not os.path.exists (lilypond_binary):
+ lilypond_binary = 'lilypond'
-# tex needs lots of memory, more than it gets by default on Debian
-non_path_environment = {
- 'extra_mem_top' : '1000000',
- 'extra_mem_bottom' : '1000000',
- 'pool_size' : '250000',
-}
-def setup_environment ():
- # $TEXMF is special, previous value is already taken care of
- if os.environ.has_key ('TEXMF'):
- del os.environ['TEXMF']
- for key in environment.keys ():
- val = environment[key]
- if os.environ.has_key (key):
- val = val + os.pathsep + os.environ[key]
- os.environ[key] = val
+ly2dvi_binary = os.path.join ('@bindir@', 'ly2dvi')
- for key in non_path_environment.keys ():
- val = non_path_environment[key]
- os.environ[key] = val
+# only use installed binary when we're installed too.
+if '@bindir@' == ('@' + 'bindir@') or not os.path.exists (lilypond_binary):
+ ly2dvi_binary = 'ly2dvi'
-include_path = [os.getcwd()]
-# g_ is for global (?)
g_extra_opts = ''
g_here_dir = os.getcwd ()
g_dep_prefix = ''
g_outdir = ''
g_force_music_fontsize = 0
-g_read_lys = 0
g_do_pictures = 1
g_do_music = 1
+g_make_html = 0
format = ''
g_run_lilypond = 1
default_text_fontsize = 12
paperguru = None
+################################################################
+# Dimension handling for LaTeX.
+#
class LatexPaper:
- def __init__(self):
+ def __init__ (self):
self.m_document_preamble = []
self.m_num_cols = 1
self.m_multicols = 1
- def find_latex_dims(self):
+ def find_latex_dims (self):
if g_outdir:
- fname = os.path.join(g_outdir, "lily-tmp.tex")
+ fname = os.path.join (g_outdir, "lily-tmp.tex")
else:
fname = "lily-tmp.tex"
try:
- f = open(fname, "w")
+ f = open (fname, "w")
except IOError:
error ("Error creating temporary file '%s'" % fname)
for s in self.m_document_preamble:
- f.write(s)
- f.write(r"""
+ f.write (s)
+ f.write (r"""
\begin{document}
\typeout{---}
\typeout{\columnsep \the\columnsep}
\typeout{---}
\end{document}
""")
- f.close()
- re_dim = re.compile(r"\\(\w+)\s+(\d+\.\d+)")
+ f.close ()
+ re_dim = re.compile (r"\\(\w+)\s+(\d+\.\d+)")
cmd = "latex '\\nonstopmode \input %s'" % fname
- if verbose_p:
- sys.stderr.write ("Invoking `%s' as pipe" % cmd)
- try:
- status = quiet_system (cmd, "Latex for finding dimensions")
- except:
- sys.stderr.write (_("Invoking LaTeX failed.") + '\n' )
- sys.stderr.write (_("This is the error log:\n") + '\n')
-
- lns = open ('lily-tmp.log').readlines()
-
+ # Ugh. (La)TeX writes progress and error messages on stdout
+ # Redirect to stderr
+ cmd += ' 1>/dev/stderr'
+ status = ly.system (cmd, ignore_error = 1)
+ signal = 0xf & status
+ exit_status = status >> 8
+
+ if status:
+ ly.error (_ ("LaTeX failed."))
+ ly.error (_ ("The error log is as follows:"))
+
+ #URG see ly2dvi
+ try:
+ lns = open ('lily-tmp.log').readlines ()
+ except:
+ lns = ''
countdown = -3
for ln in lns:
sys.stderr.write (ln)
- if re.match('^!', ln):
+ if re.match ('^!', ln):
countdown = 3
if countdown == 0:
sys.stderr.write (" ... (further messages elided)...\n")
sys.exit (1)
- lns = open ('lily-tmp.log').readlines()
+ lns = open ('lily-tmp.log').readlines ()
for ln in lns:
- ln = string.strip(ln)
- m = re_dim.match(ln)
+ ln = string.strip (ln)
+ m = re_dim.match (ln)
if m:
- if m.groups()[0] in ('textwidth', 'columnsep'):
- self.__dict__['m_%s' % m.groups()[0]] = float(m.groups()[1])
+ if m.groups ()[0] in ('textwidth', 'columnsep'):
+ self.__dict__['m_%s' % m.groups ()[0]] = float (m.groups ()[1])
try:
os.remove (fname)
- os.remove (os.path.splitext(fname)[0]+".aux")
- os.remove (os.path.splitext(fname)[0]+".log")
+ os.remove (os.path.splitext (fname)[0]+".aux")
+ os.remove (os.path.splitext (fname)[0]+".log")
except:
pass
if not self.__dict__.has_key ('m_textwidth'):
raise 'foo!'
- def get_linewidth(self):
+ def get_linewidth (self):
if self.m_num_cols == 1:
w = self.m_textwidth
else:
w = (self.m_textwidth - self.m_columnsep)/2
if self.m_multicols > 1:
- return (w - self.m_columnsep*(self.m_multicols-1)) \
+ return (w - self.m_columnsep* (self.m_multicols-1)) \
/ self.m_multicols
return w
class HtmlPaper:
- def __init__(self):
+ def __init__ (self):
self.m_papersize = 'letterpaper'
self.m_fontsize = 12
- def get_linewidth(self):
+ def get_linewidth (self):
return html_linewidths[self.m_papersize][self.m_fontsize]
class TexiPaper:
- def __init__(self):
+ def __init__ (self):
self.m_papersize = 'letterpaper'
self.m_fontsize = 12
- def get_linewidth(self):
+ def get_linewidth (self):
return texi_linewidths[self.m_papersize][self.m_fontsize]
-def mm2pt(x):
+def mm2pt (x):
return x * 2.8452756
-def in2pt(x):
+def in2pt (x):
return x * 72.26999
-def em2pt(x, fontsize = 10):
+def em2pt (x, fontsize = 10):
return {10: 10.00002, 11: 10.8448, 12: 11.74988}[fontsize] * x
-def ex2pt(x, fontsize = 10):
+def ex2pt (x, fontsize = 10):
return {10: 4.30554, 11: 4.7146, 12: 5.16667}[fontsize] * x
-def pt2pt(x):
+def pt2pt (x):
return x
dimension_conversion_dict ={
'mm': mm2pt,
- 'cm': lambda x: mm2pt(10*x),
+ 'cm': lambda x: mm2pt (10*x),
'in': in2pt,
'em': em2pt,
'ex': ex2pt,
# Convert numeric values, with or without specific dimension, to floats.
# Keep other strings
-def conv_dimen_to_float(value):
- if type(value) == type(""):
+def conv_dimen_to_float (value):
+ if type (value) == type (""):
m = re.match ("([0-9.]+)(cm|in|pt|mm|em|ex)",value)
if m:
unit = m.group (2)
- num = string.atof(m.group (1))
- conv = dimension_conversion_dict[m.group(2)]
+ num = string.atof (m.group (1))
+ conv = dimension_conversion_dict[m.group (2)]
- value = conv(num)
+ value = conv (num)
elif re.match ("^[0-9.]+$",value):
- value = float(value)
+ value = float (value)
return value
texi_linewidths = {
- 'afourpaper': {12: mm2pt(160)},
- 'afourwide': {12: in2pt(6.5)},
- 'afourlatex': {12: mm2pt(150)},
- 'smallbook': {12: in2pt(5)},
- 'letterpaper': {12: in2pt(6)}}
+ 'afourpaper': {12: mm2pt (160)},
+ 'afourwide': {12: in2pt (6.5)},
+ 'afourlatex': {12: mm2pt (150)},
+ 'smallbook': {12: in2pt (5)},
+ 'letterpaper': {12: in2pt (6)}}
html_linewidths = {
- 'afourpaper': {12: mm2pt(160)},
- 'afourwide': {12: in2pt(6.5)},
- 'afourlatex': {12: mm2pt(150)},
- 'smallbook': {12: in2pt(5)},
- 'letterpaper': {12: in2pt(6)}}
+ 'afourpaper': {12: mm2pt (160)},
+ 'afourwide': {12: in2pt (6.5)},
+ 'afourlatex': {12: mm2pt (150)},
+ 'smallbook': {12: in2pt (5)},
+ 'letterpaper': {12: in2pt (6)}}
-option_definitions = [
- ('EXT', 'f', 'format', 'use output format EXT (texi [default], latex, html)'),
- ('DIM', '', 'default-music-fontsize', 'default fontsize for music. DIM is assumed to be in points'),
- ('DIM', '', 'default-lilypond-fontsize', 'deprecated, use --default-music-fontsize'),
- ('OPT', '', 'extra-options' , 'pass OPT quoted to the lilypond command line'),
- ('DIM', '', 'force-music-fontsize', 'force fontsize for all inline lilypond. DIM is assumed be to in points'),
- ('DIM', '', 'force-lilypond-fontsize', 'deprecated, use --force-music-fontsize'),
- ('', 'h', 'help', 'this help'),
- ('DIR', 'I', 'include', 'include path'),
- ('', 'M', 'dependencies', 'write dependencies'),
- ('PREF', '', 'dep-prefix', 'prepend PREF before each -M dependency'),
- ('', 'n', 'no-lily', 'don\'t run lilypond'),
- ('', '', 'no-pictures', "don\'t generate pictures"),
- ('', '', 'no-music', "strip all lilypond blocks from output"),
- ('', '', 'read-lys', "don't write ly files."),
- ('FILE', 'o', 'outname', 'filename main output file'),
- ('FILE', '', 'outdir', "where to place generated files"),
- ('', 'V', 'verbose', 'verbose' ),
- ('', 'v', 'version', 'print version information' ),
- ]
-# format specific strings, ie. regex-es for input, and % strings for output
+################################################################
+# How to output various structures.
output_dict= {
'html' : {
- 'output-lilypond': '''<lilypond%s>
-%s
-</lilypond>''',
'output-filename' : r'''
<!-- %s >
<a href="%s">
## inline music doesn't.
## possibly other center options?
'output-html': r'''
-<a href="%(fn)s.png">
-<img align="center" valign="center" border="0" src="%(fn)s.png" alt="[picture of music]"></a>
-''',
+%(pageimages)s''',
},
%% %s
%% %s
''',
- 'output-lilypond': r'''\begin[%s]{lilypond}
-%s
-\end{lilypond}
-''',
+
# verbatim text is always finished with \n
'output-verbatim': r'''\begin{verbatim}
%s\end{verbatim}
'texi' : {
- 'output-lilypond': '''@lilypond[%s]
-%s
-@end lilypond
-''',
- 'output-filename' : r'''@ifnothtml
+
+ 'output-filename' : r'''
+@ifnothtml
@file{%s}:@*
@end ifnothtml
@ifhtml
%s@end example
''',
# do some tweaking: @ is needed in some ps stuff.
- # override EndLilyPondOutput, since @tex is done
- # in a sandbox, you can't do \input lilyponddefs at the
- # top of the document.
#
# ugh, the <p> below breaks inline images...
'output-texi-noquote': r'''@tex
\catcode`\@=12
\parindent 0pt
-\input lilyponddefs
-\def\EndLilyPondOutput{}
+\def\lilypondbook{}
\input %(fn)s.tex
\catcode`\@=0
@end tex
@html
-<p><a href="%(fn)s.png">
-<img border=0 src="%(fn)s.png" alt="[picture of music]">
-</a><p>
+<p>%(htmlimages)s
+<p>
@end html
''',
'output-texi-quoted': r'''@quotation
@tex
\catcode`\@=12
-\input lilyponddefs
-\def\EndLilyPondOutput{}
+\def\lilypondbook{}
\input %(fn)s.tex
\catcode`\@=0
@end tex
@html
-<a href="%(fn)s.png">
-<img border=0 src="%(fn)s.png" alt="[picture of music]">
-</a>
+<p>%(htmlimages)s
+<p>
@end html
@end quotation
''',
}
def output_verbatim (body, small):
- if __main__.format == 'html':
+ global format
+ if format == 'html':
body = re.sub ('&', '&', body)
body = re.sub ('>', '>', body)
body = re.sub ('<', '<', body)
- elif __main__.format == 'texi':
+ elif format == 'texi':
# clumsy workaround for python 2.2 pre bug.
body = re.sub ('@', '@@', body)
body = re.sub ('{', '@{', body)
return get_output (key) % body
-# Warning: This uses extended regular expressions. Treat with care.
+################################################################
+# Recognize special sequences in the input
+
+
+# Warning: This uses extended regular expressions. Tread with care.
#
# legenda
#
'singleline-comment': no_match,
'numcols': no_match,
'multicols': no_match,
+ 'ly2dvi': r'(?m)(?P<match><ly2dvifile(?P<options>[^>]+)?>\s*(?P<filename>[^<]+)\s*</ly2dvifile>)',
},
'latex': {
'singleline-comment': r"(?m)^.*?(?P<match>(?P<code>^%.*$\n+))",
'numcols': r"(?P<code>\\(?P<num>one|two)column)",
'multicols': r"(?P<code>\\(?P<be>begin|end)\s*{multicols}({(?P<num>\d+)?})?)",
+ 'ly2dvi': no_match,
+
},
# why do we have distinction between @mbinclude and @include?
'verb': r'''(?P<code>@code{.*?})''',
'lilypond-file': '(?m)^(?P<match>@lilypondfile(\[(?P<options>[^]]*)\])?{(?P<filename>[^}]+)})',
'lilypond' : '(?m)^(?P<match>@lilypond(\[(?P<options>[^]]*)\])?{(?P<code>.*?)})',
- 'lilypond-block': r'''(?ms)^(?P<match>@lilypond(\[(?P<options>[^]]*)\])?\s(?P<code>.*?)@end +lilypond)\s''',
+ 'lilypond-block': r'''(?ms)^(?P<match>@lilypond(\[(?P<options>[^]]*)\])?\s(?P<code>.*?)@end lilypond)\s''',
'option-sep' : ',\s*',
'intertext': r',?\s*intertext=\".*?\"',
'multiline-comment': r"(?sm)^\s*(?!@c\s+)(?P<code>@ignore\s.*?@end ignore)\s",
'singleline-comment': r"(?m)^.*?(?P<match>(?P<code>@c.*$\n+))",
'numcols': no_match,
'multicols': no_match,
+ 'ly2dvi': no_match,
}
}
except:
print 'invalid regexp: %s' % olddict[k]
- # we'd like to catch and reraise a more detailed error, but
- # alas, the exceptions changed across the 1.5/2.1 boundary.
+ ## we'd like to catch and reraise a more
+ ## detailed error, but alas, the exceptions
+ ## changed across the 1.5/2.1 boundary.
+
raise "Invalid re"
re_dict[r] = newdict
def get_re (name):
return re_dict[format][name]
-def bounding_box_dimensions(fname):
+def bounding_box_dimensions (fname):
if g_outdir:
- fname = os.path.join(g_outdir, fname)
+ fname = os.path.join (g_outdir, fname)
try:
- fd = open(fname)
+ fd = open (fname)
except IOError:
error ("Error opening `%s'" % fname)
str = fd.read ()
- s = re.search('%%BoundingBox: ([0-9]+) ([0-9]+) ([0-9]+) ([0-9]+)', str)
+ s = re.search ('%%BoundingBox: ([0-9]+) ([0-9]+) ([0-9]+) ([0-9]+)', str)
if s:
gs = map (lambda x: string.atoi (x), s.groups ())
if not g_force_music_fontsize:
m = re.match ('([0-9]+)pt', o)
if m:
- music_size = string.atoi(m.group (1))
+ music_size = string.atoi (m.group (1))
m = re.match ('indent=([-.0-9]+)(cm|in|mm|pt)', o)
if m:
is_fragment = 0
if is_fragment and not 'multiline' in opts:
- opts.append('singleline')
+ opts.append ('singleline')
- if 'singleline' in opts:
+ if 'raggedright' in opts or 'singleline' in opts:
if not linewidth:
- linewidth = 'linewidth = -1.0'
+ linewidth = 'raggedright = ##t'
if not indent:
indent = 'indent = 0.0\mm'
elif not linewidth:
- l = __main__.paperguru.get_linewidth ()
+ global paperguru
+ l = paperguru.get_linewidth ()
linewidth = 'linewidth = %f\pt' % l
if 'noindent' in opts:
elif v > 0:
pitch = pitch + '\'' * v
- body = '\\relative %s { %s }' %(pitch, body)
+ body = '\\relative %s { %s }' % (pitch, body)
if is_fragment:
body = r'''
def scan_html_preamble (chunks):
return
-def scan_latex_preamble(chunks):
+def scan_latex_preamble (chunks):
# First we want to scan the \documentclass line
# it should be the first non-comment line.
# The only thing we really need to know about the \documentclass line
if chunks[idx][0] == 'ignore':
idx = idx + 1
continue
- m = get_re ('header').match(chunks[idx][1])
+ m = get_re ('header').match (chunks[idx][1])
if not m:
error ("Latex documents must start with a \documentclass command")
if m.group (1):
- options = re.split (',[\n \t]*', m.group(1)[1:-1])
+ options = re.split (',[\n \t]*', m.group (1)[1:-1])
else:
options = []
if 'twocolumn' in options:
# Then we add everything before \begin{document} to
# paperguru.m_document_preamble so that we can later write this header
# to a temporary file in find_latex_dims() to find textwidth.
- while idx < len(chunks) and chunks[idx][0] != 'preamble-end':
+ while idx < len (chunks) and chunks[idx][0] != 'preamble-end':
if chunks[idx] == 'ignore':
idx = idx + 1
continue
- paperguru.m_document_preamble.append(chunks[idx][1])
+ paperguru.m_document_preamble.append (chunks[idx][1])
idx = idx + 1
- if len(chunks) == idx:
+ if len (chunks) == idx:
error ("Didn't find end of preamble (\\begin{document})")
- paperguru.find_latex_dims()
+ paperguru.find_latex_dims ()
def scan_texi_preamble (chunks):
# this is not bulletproof..., it checks the first 10 chunks
if c[0] == 'input':
for s in ('afourpaper', 'afourwide', 'letterpaper',
'afourlatex', 'smallbook'):
- if string.find(c[1], "@%s" % s) != -1:
+ if string.find (c[1], "@%s" % s) != -1:
paperguru.m_papersize = s
def scan_preamble (chunks):
- if __main__.format == 'html':
+ global format
+ if format == 'html':
scan_html_preamble (chunks)
- elif __main__.format == 'latex':
+ elif format == 'latex':
scan_latex_preamble (chunks)
- elif __main__.format == 'texi':
+ elif format == 'texi':
scan_texi_preamble (chunks)
def completize_preamble (chunks):
- if __main__.format != 'latex':
+ global format
+ if format != 'latex':
return chunks
pre_b = post_b = graphics_b = None
for chunk in chunks:
if chunk[0] == 'preamble-end':
break
if chunk[0] == 'input':
- m = get_re('def-pre-re').search(chunk[1])
+ m = get_re ('def-pre-re').search (chunk[1])
if m:
pre_b = 1
if chunk[0] == 'input':
- m = get_re('def-post-re').search(chunk[1])
+ m = get_re ('def-post-re').search (chunk[1])
if m:
post_b = 1
if chunk[0] == 'input':
- m = get_re('usepackage-graphics').search(chunk[1])
+ m = get_re ('usepackage-graphics').search (chunk[1])
if m:
graphics_b = 1
x = 0
while x < len (chunks) and chunks[x][0] != 'preamble-end':
x = x + 1
- if x == len(chunks):
+ if x == len (chunks):
return chunks
if not pre_b:
- chunks.insert(x, ('input', get_output ('output-default-pre')))
+ chunks.insert (x, ('input', get_output ('output-default-pre')))
if not post_b:
- chunks.insert(x, ('input', get_output ('output-default-post')))
+ chunks.insert (x, ('input', get_output ('output-default-post')))
if not graphics_b:
- chunks.insert(x, ('input', get_output ('usepackage-graphics')))
+ chunks.insert (x, ('input', get_output ('usepackage-graphics')))
return chunks
try:
nm = os.path.join (a, name)
f = open (nm)
- __main__.read_files.append (nm)
+ global read_files
+ read_files.append (nm)
break
except IOError:
pass
error ("File not found `%s'\n" % name)
return ('', '')
-def do_ignore(match_object):
- return [('ignore', match_object.group('code'))]
-def do_preamble_end(match_object):
- return [('preamble-end', match_object.group('code'))]
+def do_ignore (match_object):
+ return [('ignore', match_object.group ('code'))]
+def do_preamble_end (match_object):
+ return [('preamble-end', match_object.group ('code'))]
-def make_verbatim(match_object):
- return [('verbatim', match_object.group('code'))]
+def make_verbatim (match_object):
+ return [('verbatim', match_object.group ('code'))]
-def make_verb(match_object):
- return [('verb', match_object.group('code'))]
+def make_verb (match_object):
+ return [('verb', match_object.group ('code'))]
-def do_include_file(m):
+def do_include_file (m):
"m: MatchObject"
return [('input', get_output ('pagebreak'))] \
- + read_doc_file(m.group('filename')) \
+ + read_doc_file (m.group ('filename')) \
+ [('input', get_output ('pagebreak'))]
-def do_input_file(m):
- return read_doc_file(m.group('filename'))
+def do_input_file (m):
+ return read_doc_file (m.group ('filename'))
-def make_lilypond(m):
- if m.group('options'):
- options = m.group('options')
+def make_lilypond (m):
+ if m.group ('options'):
+ options = m.group ('options')
else:
options = ''
- return [('input', get_output('output-lilypond-fragment') %
- (options, m.group('code')))]
+ return [('input', get_output ('output-lilypond-fragment') %
+ (options, m.group ('code')))]
-def make_lilypond_file(m):
+def make_lilypond_file (m):
'''
Find @lilypondfile{bla.ly} occurences and substitute bla.ly
'''
- if m.group('options'):
- options = m.group('options')
+ if m.group ('options'):
+ options = get_re ('option-sep').split (m.group ('options'))
else:
- options = ''
- (content, nm) = find_file(m.group('filename'))
- options = "filename=%s," % nm + options
+ options = []
+ (content, nm) = find_file (m.group ('filename'))
+ options.append ("filename=%s" % nm)
+
+
+ return [('lilypond', content, options)]
+
+
+def make_ly2dvi_block (m):
+ '''
+
+ Find <ly2dvifile .. >
+ '''
+
+ return [('ly2dvi', m.group ('filename'), m.group ('options'))]
- return [('input', get_output('output-lilypond') %
- (options, content))]
-def make_lilypond_block(m):
+def make_lilypond_block (m):
if not g_do_music:
return []
- if m.group('options'):
- options = get_re('option-sep').split (m.group('options'))
+ if m.group ('options'):
+ options = get_re ('option-sep').split (m.group ('options'))
else:
options = []
- options = filter(lambda s: s != '', options)
- return [('lilypond', m.group('code'), options)]
+ options = filter (lambda s: s != '', options)
+ return [('lilypond', m.group ('code'), options)]
-def do_columns(m):
- if __main__.format != 'latex':
- return []
- if m.group('num') == 'one':
- return [('numcols', m.group('code'), 1)]
- if m.group('num') == 'two':
- return [('numcols', m.group('code'), 2)]
-def do_multicols(m):
- if __main__.format != 'latex':
+def do_columns (m):
+ global format
+ if format != 'latex':
+ return []
+ if m.group ('num') == 'one':
+ return [('numcols', m.group ('code'), 1)]
+ if m.group ('num') == 'two':
+ return [('numcols', m.group ('code'), 2)]
+
+def do_multicols (m):
+ global format
+ if format != 'latex':
return []
- if m.group('be') == 'begin':
- return [('multicols', m.group('code'), int(m.group('num')))]
+ if m.group ('be') == 'begin':
+ return [('multicols', m.group ('code'), int (m.group ('num')))]
else:
- return [('multicols', m.group('code'), 1)]
+ return [('multicols', m.group ('code'), 1)]
return []
-def chop_chunks(chunks, re_name, func, use_match=0):
+def chop_chunks (chunks, re_name, func, use_match=0):
newchunks = []
for c in chunks:
if c[0] == 'input':
newchunks.append (('input', str[:m.start ('match')]))
else:
newchunks.append (('input', str[:m.start (0)]))
- #newchunks.extend(func(m))
+ #newchunks.extend (func (m))
# python 1.5 compatible:
- newchunks = newchunks + func(m)
- str = str [m.end(0):]
+ newchunks = newchunks + func (m)
+ str = str [m.end (0):]
else:
- newchunks.append(c)
+ newchunks.append (c)
return newchunks
def determine_format (str):
- if __main__.format == '':
+ """
+ SIDE EFFECT! This sets FORMAT and PAPERGURU
+
+ """
+
+ global format
+ if format == '':
html = re.search ('(?i)<[dh]tml', str[:200])
latex = re.search (r'''\\document''', str[:200])
texi = re.search ('@node|@setfilename', str[:200])
f = 'texi'
else:
error ("can't determine format, please specify")
- __main__.format = f
+ format = f
- if __main__.paperguru == None:
- if __main__.format == 'html':
+ global paperguru
+ if paperguru == None:
+ if format == 'html':
g = HtmlPaper ()
- elif __main__.format == 'latex':
+ elif format == 'latex':
g = LatexPaper ()
- elif __main__.format == 'texi':
+ elif format == 'texi':
g = TexiPaper ()
- __main__.paperguru = g
+ paperguru = g
def read_doc_file (filename):
'''Read the input file, find verbatim chunks and do \input and \include
'''
- (str, path) = find_file(filename)
+ (str, path) = find_file (filename)
determine_format (str)
chunks = [('input', str)]
# we have to check for verbatim before doing include,
# because we don't want to include files that are mentioned
# inside a verbatim environment
- chunks = chop_chunks(chunks, 'verbatim', make_verbatim)
+ chunks = chop_chunks (chunks, 'verbatim', make_verbatim)
- chunks = chop_chunks(chunks, 'verb', make_verb)
- chunks = chop_chunks(chunks, 'multiline-comment', do_ignore)
+ chunks = chop_chunks (chunks, 'verb', make_verb)
+ chunks = chop_chunks (chunks, 'multiline-comment', do_ignore)
#ugh fix input
- chunks = chop_chunks(chunks, 'include', do_include_file, 1)
- chunks = chop_chunks(chunks, 'input', do_input_file, 1)
+ chunks = chop_chunks (chunks, 'include', do_include_file, 1)
+ chunks = chop_chunks (chunks, 'input', do_input_file, 1)
return chunks
taken_file_names = {}
+
+def unique_file_name (body):
+ return 'lily-' + `abs (hash (body))`
+
def schedule_lilypond_block (chunk):
'''Take the body and options from CHUNK, figure out how the
- real .ly should look, and what should be left MAIN_STR (meant
- for the main file). The .ly is written, and scheduled in
+ real .ly should look. The .ly is written, and scheduled in
TODO.
- Return: a chunk (TYPE_STR, MAIN_STR, OPTIONS, TODO, BASE)
+ Return: a single chunk.
- TODO has format [basename, extension, extension, ... ]
+ The chunk pertaining to the lilypond output
+ has the format (TYPE_STR, MAIN_STR, OPTIONS, TODO, BASE),
+ where TODO has format [basename, extension, extension, ... ]
'''
+
(type, body, opts) = chunk
assert type == 'lilypond'
file_body = compose_full_body (body, opts)
## Hmm, we should hash only lilypond source, and skip the
## %options are ...
## comment line
- basename = 'lily-' + `abs(hash (file_body))`
+ basename = unique_file_name (file_body)
for o in opts:
m = re.search ('filename="(.*?)"', o)
if m:
basename = m.group (1)
- if not taken_file_names.has_key(basename):
+ if not taken_file_names.has_key (basename):
taken_file_names[basename] = 0
else:
taken_file_names[basename] = taken_file_names[basename] + 1
basename = basename + "-%i" % taken_file_names[basename]
- if not g_read_lys:
- update_file(file_body, os.path.join(g_outdir, basename) + '.ly')
+ update_file (file_body, os.path.join (g_outdir, basename) + '.ly')
needed_filetypes = ['tex']
- if format == 'html' or format == 'texi':
+ if format == 'html' or g_make_html:
needed_filetypes.append ('eps')
needed_filetypes.append ('png')
if 'eps' in opts and not ('eps' in needed_filetypes):
- needed_filetypes.append('eps')
+ needed_filetypes.append ('eps')
+
pathbase = os.path.join (g_outdir, basename)
def f (base, ext1, ext2):
- a = os.path.isfile(base + ext2)
- if (os.path.isfile(base + ext1) and
- os.path.isfile(base + ext2) and
- os.stat(base+ext1)[stat.ST_MTIME] >
- os.stat(base+ext2)[stat.ST_MTIME]) or \
- not os.path.isfile(base + ext2):
+ a = os.path.isfile (base + ext2)
+ if (os.path.isfile (base + ext1) and
+ os.path.isfile (base + ext2) and
+ os.stat (base+ext1)[stat.ST_MTIME] >
+ os.stat (base+ext2)[stat.ST_MTIME]) or \
+ not os.path.isfile (base + ext2):
return 1
todo = []
- if 'tex' in needed_filetypes and f(pathbase, '.ly', '.tex'):
- todo.append('tex')
- if 'eps' in needed_filetypes and f(pathbase, '.tex', '.eps'):
- todo.append('eps')
- if 'png' in needed_filetypes and f(pathbase, '.eps', '.png'):
- todo.append('png')
- newbody = ''
+ if 'tex' in needed_filetypes and f (pathbase, '.ly', '.tex'):
+ todo.append ('tex')
+ if 'eps' in needed_filetypes and f (pathbase, '.tex', '.eps'):
+ todo.append ('eps')
+ if 'png' in needed_filetypes and f (pathbase, '.eps', '.png'):
+ todo.append ('png')
+
+ return ('lilypond', body, opts, todo, basename)
+def format_lilypond_block (chunk):
+ """
+
+ Figure out what should be left MAIN_STR (meant
+ for the main file) from a lilypond chunk: process
+ verbatim, and other options. Return: multiple chunks.
+
+
+ """
+
+
+ return_chunks = []
+
+ (type, body, opts, todo, basename) = chunk
+ assert type == 'lilypond'
+
+
+ newbody = ''
+ filename_chunk = None
if 'printfilename' in opts:
for o in opts:
m= re.match ("filename=(.*)", o)
if m:
- newbody = newbody + get_output ("output-filename") % (m.group(1), basename + '.ly', m.group(1))
+ template = get_output ("output-filename")
+ b = basename + '.ly'
+ human_base = os.path.basename (m.group (1))
+
+ ## todo: include path, but strip
+ ## first part of the path.
+ filename_chunk = ('input', template % (human_base, b,human_base))
break
if 'smallverbatim' in opts:
- newbody = newbody + output_verbatim (body, 1)
+ newbody += output_verbatim (body, 1)
elif 'verbatim' in opts:
- newbody = newbody + output_verbatim (body, 0)
+ newbody += output_verbatim (body, 0)
for o in opts:
m = re.search ('intertext="(.*?)"', o)
if 'eps' in opts:
s = 'output-eps'
else:
- if 'noquote' in opts:
- s = 'output-latex-noquote'
- else:
+ if 'quote' in opts:
s = 'output-latex-quoted'
+ else:
+ s = 'output-latex-noquote'
elif format == 'texi':
- if 'noquote' in opts:
- s = 'output-texi-noquote'
- else:
+ if 'quote' in opts:
s = 'output-texi-quoted'
+ else:
+ s = 'output-texi-noquote'
else: # format == 'html'
s = 'output-html'
- newbody = newbody + get_output (s) % {'fn': basename }
- return ('lilypond', newbody, opts, todo, basename)
-
-def process_lilypond_blocks(chunks):#ugh rename
- newchunks = []
- # Count sections/chapters.
- for c in chunks:
- if c[0] == 'lilypond':
- c = schedule_lilypond_block (c)
- elif c[0] == 'numcols':
- paperguru.m_num_cols = c[2]
- elif c[0] == 'multicols':
- paperguru.m_multicols = c[2]
- newchunks.append (c)
- return newchunks
+ def html_pages (basename):
+ files = glob.glob ("%s-page*.png"% basename)
+ template = '''<img align="center" valign="center"
+ border="0" src="%s" alt="[picture of music]">'''
-def system (cmd):
- sys.stderr.write ("invoking `%s'\n" % cmd)
- st = os.system (cmd)
- if st:
- error ('Error command exited with value %d\n' % st)
- return st
+ str = ''
+ if not files:
+ files = [basename+'.png' ]
+ for f in files:
+ str += template % f
-def quiet_system (cmd, name):
- if not verbose_p:
- progress ( _("Running %s...") % name)
- cmd = cmd + ' 1> /dev/null 2> /dev/null'
+ str = '<a href="%s.ly">%s</a>' % (basename, str)
+ return str
- return system (cmd)
+ newbody = newbody + get_output (s) % {'fn': basename,
+ 'htmlimages': html_pages(basename)
+ }
-def get_bbox (filename):
-
- # gs bbox device is ugh, it always prints of stderr.
- system ('gs -sDEVICE=bbox -q -sOutputFile=- -dNOPAUSE %s -c quit > %s.bbox 2>&1' % (filename, filename))
-
- box = open (filename + '.bbox').read()
- m = re.match ('^%%BoundingBox: ([0-9]+) ([0-9]+) ([0-9]+) ([0-9]+)', box)
- gr = []
- if m:
- gr = map (string.atoi, m.groups ())
+ if filename_chunk:
+ return_chunks += [filename_chunk]
+
+ return_chunks += [('lilypond', newbody, opts, todo, basename)]
+
+ return return_chunks
- return gr
+def format_lilypond_output_bodies (chunks):
+ newchunks = []
+ for c in chunks:
-def make_pixmap (name):
- bbox = get_bbox (name + '.eps')
+ if c[0] == 'lilypond':
+ newchunks += format_lilypond_block (c)
+ else:
+ newchunks.append (c)
+ return newchunks
- margin = 0
- fo = open (name + '.trans.eps' , 'w')
- fo.write ('%d %d translate\n' % (-bbox[0]+margin, -bbox[1]+margin))
- fo.close ()
- res = 90
- x = (2* margin + bbox[2] - bbox[0]) * res / 72.
- y = (2* margin + bbox[3] - bbox[1]) * res / 72.
- if x == 0:
- x = 1
- if y == 0:
- y = 1
+def process_lilypond_blocks (chunks):#ugh rename
+ newchunks = []
+ # Count sections/chapters.
+ for c in chunks:
+ if c[0] == 'lilypond':
+ c = schedule_lilypond_block (c)
+ elif c[0] == 'numcols':
+ paperguru.m_num_cols = c[2]
+ elif c[0] == 'multicols':
+ paperguru.m_multicols = c[2]
+
+ newchunks.append (c)
+
+ return newchunks
- cmd = r'''gs -g%dx%d -sDEVICE=pnggray -dTextAlphaBits=4 -dGraphicsAlphaBits=4 -q -sOutputFile=%s -r%d -dNOPAUSE %s %s -c quit '''
+def process_ly2dvi_blocks (chunks):
+
+ def process_ly2dvi_block (chunk):
+ """
+
+Run ly2dvi script on filename specified in CHUNK.
+This is only supported for HTML output.
+
+In HTML output it will leave a download menu with ps/pdf/midi etc. in
+a separate HTML file, and a title + preview in the main html file,
+linking to the menu.
+
+ """
+ (tag, name, opts) = chunk
+ assert format == 'html'
+ (content, original_name) = find_file (name)
+
+ original_name = os.path.basename (original_name)
+
+ base = unique_file_name (content)
+ outname = base + '.ly'
+ changed = update_file (content, outname)
+
+ preview = base + ".png"
+ if changed or not os.path.isfile (preview):
+
+ ly.system ('%s --preview --postscript --verbose %s ' % (ly2dvi_binary, base) )
+
+ ly.make_ps_images (base)
+ ly.system ('gzip -9 - < %s.ps > %s.ps.gz' % (base, base))
+
+ def size_str (fn):
+ b = os.stat(fn)[stat.ST_SIZE]
+ if b < 1024:
+ return '%d bytes' % b
+ elif b < (2 << 20):
+ return '%d kb' % (b >> 10)
+ else:
+ return '%d mb' % (b >> 20)
+
+ exts = {
+ 'pdf' : "Print (PDF, %s)",
+ 'ps.gz' : "Print (gzipped PostScript, %s)",
+ 'png' : "View (PNG, %s)",
+ 'midi' : "Listen (MIDI, %s)",
+ 'ly' : "View source code (%s)",
+ }
+
+ menu = ''
+ page_files = glob.glob ('%s-page*.png' % base)
+
+ for p in string.split (page_files, '\n'):
+ p = p.strip()
+ if os.path.isfile (p):
+ sz = size_str (p)
+ page = re.sub ('.*page([0-9])+.*', 'View page \\1 (PNG picture, %s)\n', p)
+ page = page % sz
+ menu += '<li><a href="%s">%s</a>' % (p, page)
+
+ ext_order = ['ly', 'pdf', 'ps.gz', 'midi']
+ for e in ext_order:
+ fn = base + '.' + e
+ print 'checking,' , fn
+ if not os.path.isfile (fn):
+ continue
+
+ entry = exts[e] % size_str (fn)
+
+ ## TODO: do something like
+ ## this for texinfo/latex as well ?
+
+ menu += '<li><a href="%s">%s</a>\n\n' % (fn, entry)
+
+
+ explanatory_para = """The pictures are 90dpi
+anti-aliased snapshots of the printed output, in PNG format. Both PDF and PS
+use scalable fonts and should look OK at any resolution."""
+
+ separate_menu =r'''
+<title>LilyPond example %s</title>
+
+<h1>%s</h1>
+<p><img src="%s">
+<p>%s
+<p>
+<ul>%s</ul>''' % (original_name,original_name, preview, explanatory_para, menu)
+
+ open (base + '.html','w'). write (separate_menu)
+
+ inline_menu = '<p/><a href="%s.html"><img src="%s"><p/></a>' % (base, original_name, preview)
+
+ return ('ly2dvi', inline_menu)
- cmd = cmd % (x, y, name + '.png', res, name + '.trans.eps', name + '.eps')
- status = 0
- try:
- status = system (cmd)
- except:
- status = -1
+ newchunks = []
+ for c in chunks:
+ if c[0] == 'ly2dvi':
+ c = process_ly2dvi_block (c)
+ newchunks.append (c)
- if status:
- os.unlink (name + '.png')
- error ("Removing output file")
+ return newchunks
def compile_all_files (chunks):
global foutn
for c in chunks:
if c[0] != 'lilypond':
continue
+
base = c[4]
exts = c[3]
for e in exts:
tex.append (base + '.ly')
elif e == 'png' and g_do_pictures:
png.append (base)
- d = os.getcwd()
+ d = os.getcwd ()
if g_outdir:
- os.chdir(g_outdir)
+ os.chdir (g_outdir)
if tex:
# fixme: be sys-independent.
def incl_opt (x):
return ' -I %s' % x
incs = map (incl_opt, include_path)
- lilyopts = string.join (incs, ' ' )
+ lilyopts = string.join (incs)
if do_deps:
- lilyopts = lilyopts + ' --dependencies '
+ lilyopts += ' --dependencies'
if g_outdir:
- lilyopts = lilyopts + '--dep-prefix=' + g_outdir + '/'
- texfiles = string.join (tex, ' ')
- cmd = '%s --header=texidoc %s %s %s' \
- % (binary, lilyopts, g_extra_opts, texfiles)
-
- system (cmd)
+ lilyopts += ' --dep-prefix=' + g_outdir + '/'
+ lilyopts += ' --header=texidoc'
+ texfiles = string.join (tex)
+ cmd = string.join ((lilypond_binary, lilyopts, g_extra_opts,
+ texfiles))
+ ly.system (cmd, ignore_error = 0, progress_p = 1)
#
# Ugh, fixing up dependencies for .tex generation
#
if do_deps:
- depfiles=map (lambda x: re.sub ('(.*)\.ly', '\\1.dep', x), tex)
+ depfiles=map (lambda x: re.sub ('(.*)\.ly', '\\1.dep',
+ x), tex)
+
for i in depfiles:
f =open (i)
text=f.read ()
f.close ()
- text=re.sub ('\n([^:\n]*):', '\n' + foutn + ':', text)
+ text=re.sub ('\n([^:\n]*):',
+ '\n' + foutn + ':', text)
f = open (i, 'w')
f.write (text)
f.close ()
- for e in eps:
- cmd = r"echo $TEXMF; latex '\nonstopmode \input %s'" % e
- quiet_system (cmd, 'LaTeX')
-
- cmd = r"dvips -E -o %s %s" % (e + '.eps', e)
- quiet_system (cmd, 'dvips')
-
- for g in png:
- make_pixmap (g)
+ def to_eps (file):
+ cmd = r"latex '\nonstopmode \input %s'" % file
+ # Ugh. (La)TeX writes progress and error messages on stdout
+ # Redirect to stderr
+ cmd += ' 1>/dev/stderr'
+ ly.system (cmd)
+ ly.system ("dvips -E -o %s.eps %s" % (file, file))
+ map (to_eps, eps)
+ map (ly.make_ps_images, map (lambda x: x + '.eps', png))
os.chdir (d)
def update_file (body, name):
'''
- write the body if it has changed
+ write the body if it has changed. Return whether BODY has changed.
'''
same = 0
try:
return not same
-def getopt_args (opts):
- "Construct arguments (LONG, SHORT) for getopt from list of options."
- short = ''
- long = []
- for o in opts:
- if o[1]:
- short = short + o[1]
- if o[0]:
- short = short + ':'
- if o[2]:
- l = o[2]
- if o[0]:
- l = l + '='
- long.append (l)
- return (short, long)
-
-def option_help_str (o):
- "Transform one option description (4-tuple ) into neatly formatted string"
- sh = ' '
- if o[1]:
- sh = '-%s' % o[1]
-
- sep = ' '
- if o[1] and o[2]:
- sep = ','
-
- long = ''
- if o[2]:
- long= '--%s' % o[2]
-
- arg = ''
- if o[0]:
- if o[2]:
- arg = '='
- arg = arg + o[0]
- return ' ' + sh + sep + long + arg
-
-def options_help_str (opts):
- "Convert a list of options into a neatly formatted string"
- w = 0
- strs =[]
- helps = []
-
- for o in opts:
- s = option_help_str (o)
- strs.append ((s, o[3]))
- if len (s) > w:
- w = len (s)
-
- str = ''
- for s in strs:
- str = str + '%s%s%s\n' % (s[0], ' ' * (w - len(s[0]) + 3), s[1])
- return str
-
-def help():
- sys.stdout.write('''Usage: lilypond-book [options] FILE\n
-Generate hybrid LaTeX input from latex + lilypond.\n
-Options:
-''')
- sys.stdout.write (options_help_str (option_definitions))
- sys.stdout.write (r'''
-Warning: All output is written in the CURRENT directory.
-
-
-Report bugs to bug-lilypond@gnu.org.
-
-Written by Tom Cato Amundsen <tca@gnu.org> and
-Han-Wen Nienhuys <hanwen@cs.uu.nl>
-''')
-
- sys.exit (0)
-
-
def write_deps (fn, target, chunks):
global read_files
- sys.stderr.write('Writing `%s\'\n' % os.path.join(g_outdir, fn))
- f = open (os.path.join(g_outdir, fn), 'w')
+ sys.stderr.write ('Writing `%s\'\n' % os.path.join (g_outdir, fn))
+ f = open (os.path.join (g_outdir, fn), 'w')
f.write ('%s%s: ' % (g_dep_prefix, target))
for d in read_files:
f.write ('%s ' % d)
- basenames=[]
- for c in chunks:
- if c[0] == 'lilypond':
- (type, body, opts, todo, basename) = c;
- basenames.append (basename)
- for d in basenames:
- if g_outdir:
- d=g_outdir + '/' + d
- if g_dep_prefix:
- #if not os.isfile (d): # thinko?
- if not re.search ('/', d):
- d = g_dep_prefix + d
- f.write ('%s.tex ' % d)
- f.write ('\n')
- #if len (basenames):
- # for d in basenames:
- # f.write ('%s.ly ' % d)
- # f.write (' : %s' % target)
- f.write ('\n')
- f.close ()
- read_files = []
-def identify (stream):
- stream.write ('lilypond-book (GNU LilyPond) %s\n' % program_version)
-def print_version ():
- identify (sys.stdout)
- sys.stdout.write (r'''Copyright 1998--1999
-Distributed under terms of the GNU General Public License. It comes with
-NO WARRANTY.
-''')
+ ## There used to be code to write .tex dependencies, but
+ ## that is silly: lilypond-book has its own dependency scheme
+ ## to ensure that all lily-XXX.tex files are there
+
+ f.write ('\n')
+ f.close ()
+ read_files = []
def check_texidoc (chunks):
+ ## TODO: put file name in front of texidoc.
+ ##
n = []
for c in chunks:
if c[0] == 'lilypond':
(type, body, opts, todo, basename) = c;
pathbase = os.path.join (g_outdir, basename)
- if os.path.isfile (pathbase + '.texidoc'):
+ if os.path.isfile (pathbase + '.texidoc') \
+ and 'notexidoc' not in opts:
body = '\n@include %s.texidoc\n' % basename + body
c = (type, body, opts, todo, basename)
n.append (c)
return '%fpt' % (dims[0] *lmag)
body = re.sub (r'''\\lilypondepswidth{(.*?)}''', replace_eps_dim, c[1])
- newchunks.append(('lilypond', body, c[2], c[3], c[4]))
+ newchunks.append (('lilypond', body, c[2], c[3], c[4]))
return newchunks
##docme: why global?
foutn=""
-def do_file(input_filename):
- chunks = read_doc_file(input_filename)
- chunks = chop_chunks(chunks, 'lilypond', make_lilypond, 1)
- chunks = chop_chunks(chunks, 'lilypond-file', make_lilypond_file, 1)
- chunks = chop_chunks(chunks, 'lilypond-block', make_lilypond_block, 1)
- chunks = chop_chunks(chunks, 'singleline-comment', do_ignore, 1)
- chunks = chop_chunks(chunks, 'preamble-end', do_preamble_end)
- chunks = chop_chunks(chunks, 'numcols', do_columns)
- chunks = chop_chunks(chunks, 'multicols', do_multicols)
- #print "-" * 50
- #for c in chunks: print "c:", c;
- #sys.exit()
- scan_preamble(chunks)
- chunks = process_lilypond_blocks(chunks)
-
+def do_file (input_filename):
+ chunks = read_doc_file (input_filename)
+ chunks = chop_chunks (chunks, 'ly2dvi', make_ly2dvi_block, 1)
+ chunks = chop_chunks (chunks, 'lilypond', make_lilypond, 1)
+ chunks = chop_chunks (chunks, 'lilypond-file', make_lilypond_file, 1)
+ chunks = chop_chunks (chunks, 'lilypond-block', make_lilypond_block, 1)
+ chunks = chop_chunks (chunks, 'singleline-comment', do_ignore, 1)
+ chunks = chop_chunks (chunks, 'preamble-end', do_preamble_end)
+ chunks = chop_chunks (chunks, 'numcols', do_columns)
+ chunks = chop_chunks (chunks, 'multicols', do_multicols)
+
+ scan_preamble (chunks)
+ chunks = process_lilypond_blocks (chunks)
+ chunks = process_ly2dvi_blocks (chunks)
+
# Do It.
- if __main__.g_run_lilypond:
+ global g_run_lilypond
+ if g_run_lilypond:
compile_all_files (chunks)
chunks = fix_epswidth (chunks)
- if __main__.format == 'texi':
+ global format
+ if format == 'texi':
chunks = check_texidoc (chunks)
+ chunks = format_lilypond_output_bodies (chunks)
+
+
x = 0
chunks = completize_preamble (chunks)
elif input_filename == '-' or input_filename == "/dev/stdin":
my_outname = '-'
else:
- my_outname = os.path.basename (os.path.splitext(input_filename)[0]) + '.' + format
+ my_outname = os.path.basename (os.path.splitext (input_filename)[0]) + '.' + format
my_depname = my_outname + '.dep'
if my_outname == '-' or my_outname == '/dev/stdout':
fout = sys.stdout
foutn = "<stdout>"
- __main__.do_deps = 0
+ global do_deps
+ do_deps = 0
else:
foutn = os.path.join (g_outdir, my_outname)
sys.stderr.write ("Writing `%s'\n" % foutn)
outname = ''
try:
- (sh, long) = getopt_args (__main__.option_definitions)
- (options, files) = getopt.getopt(sys.argv[1:], sh, long)
+ (sh, long) = ly.getopt_args (option_definitions)
+ (options, files) = getopt.getopt (sys.argv[1:], sh, long)
+
except getopt.error, msg:
- sys.stderr.write("error: %s" % msg)
- sys.exit(1)
+ sys.stderr.write ('\n')
+ ly.error (_ ("getopt says: `%s\'" % s))
+ sys.stderr.write ('\n')
+ ly.help ()
+ ly.exit (2)
do_deps = 0
for opt in options:
if o == '--include' or o == '-I':
include_path.append (a)
elif o == '--version' or o == '-v':
- print_version ()
- sys.exit (0)
+ ly.identify (sys.stdout)
+ sys.exit (0)
elif o == '--verbose' or o == '-V':
- __main__.verbose_p = 1
+ verbose_p = 1
elif o == '--format' or o == '-f':
- __main__.format = a
+ format = a
+ if a == 'texi-html':
+ format = 'texi'
+ g_make_html = 1
elif o == '--outname' or o == '-o':
- if len(files) > 1:
+ if len (files) > 1:
#HACK
- sys.stderr.write("Lilypond-book is confused by --outname on multiple files")
- sys.exit(1)
+ sys.stderr.write ("Lilypond-book is confused by --outname on multiple files")
+ sys.exit (1)
outname = a
elif o == '--help' or o == '-h':
- help ()
+ ly.help ()
+ sys.exit (0)
elif o == '--no-lily' or o == '-n':
- __main__.g_run_lilypond = 0
+ g_run_lilypond = 0
+ elif o == '--preview-resolution':
+ preview_resolution = string.atoi (a)
elif o == '--dependencies' or o == '-M':
do_deps = 1
elif o == '--default-music-fontsize':
elif o == '--extra-options':
g_extra_opts = a
elif o == '--force-music-fontsize':
- g_force_music_fontsize = string.atoi(a)
+ g_force_music_fontsize = string.atoi (a)
elif o == '--force-lilypond-fontsize':
print "--force-lilypond-fontsize is deprecated, use --default-lilypond-fontsize"
- g_force_music_fontsize = string.atoi(a)
+ g_force_music_fontsize = string.atoi (a)
elif o == '--dep-prefix':
g_dep_prefix = a
elif o == '--no-pictures':
g_do_pictures = 0
elif o == '--no-music':
g_do_music = 0
- elif o == '--read-lys':
- g_read_lys = 1
elif o == '--outdir':
g_outdir = a
+ elif o == '--warranty' or o == '-w':
+ #status = os.system ('lilypond -w')
+ if 1 or status:
+ ly.warranty ()
+ sys.exit (0)
+
+ly.identify (sys.stderr)
-identify (sys.stderr)
if g_outdir:
- if os.path.isfile(g_outdir):
+ if os.path.isfile (g_outdir):
error ("outdir is a file: %s" % g_outdir)
- if not os.path.exists(g_outdir):
- os.mkdir(g_outdir)
-setup_environment ()
+ if not os.path.exists (g_outdir):
+ os.mkdir (g_outdir)
+
+if not files:
+ ly.help ()
+ ly.error (_ ("no files specified on command line"))
+ ly.exit (2)
+
+ly.setup_environment ()
+
+
for input_filename in files:
- do_file(input_filename)
+ do_file (input_filename)
+
#
# Petr, ik zou willen dat ik iets zinvoller deed,
projects / lilypond.git / blobdiff