#!@PYTHON@
-# vim: set noexpandtab:
-# TODO:
-# * junk --outdir for --output
-# * Figure out clean set of options.
-# *
-# * EndLilyPondOutput is def'd as vfil. Causes large white gaps.
-# * texinfo: add support for @pagesize
-# todo: dimension handling (all the x2y) is clumsy. (tca: Thats
-# because the values are taken directly from texinfo.tex,
-# geometry.sty and article.cls. Give me a hint, and I'll
-# fix it.)
+'''
+Example usage:
-#
-# TODO: magnification support should also work for texinfo -> html: eg. add as option to dvips.
-#
-
-# This is was the idea for handling of comments:
-# Multiline comments, @ignore .. @end ignore is scanned for
-# in read_doc_file, and the chunks are marked as 'ignore', so
-# lilypond-book will not touch them any more. The content of the
-# chunks are written to the output file. Also 'include' and 'input'
-# regex has to check if they are commented out.
-#
-# Then it is scanned for 'lilypond', 'lilypond-file' and 'lilypond-block'.
-# These three regex's has to check if they are on a commented line,
-# % for latex, @c for texinfo.
-#
-# Then lines that are commented out with % (latex) and @c (Texinfo)
-# are put into chunks marked 'ignore'. This cannot be done before
-# searching for the lilypond-blocks because % is also the comment character
-# for lilypond.
-#
-# The the rest of the rexeces are searched for. They don't have to test
-# if they are on a commented out line.
+test:
+ lilypond-book --filter="tr '[a-z]' '[A-Z]'" BOOK
+
+convert-ly on book:
+ lilypond-book --filter="convert-ly --no-version --from=1.6.11 -" BOOK
+
+classic lilypond-book:
+ lilypond-book --process="lilypond" BOOK.tely
+TODO:
+ * ly-options: intertext ?
+ * --linewidth?
+ * eps in latex / eps by lilypond -fps ?
+ * check latex parameters, twocolumn, multicolumn?
+
+ * Converting from lilypond-book source, substitute:
+ @mbinclude foo.itely -> @include foo.itely
+ \mbinput -> \input
+'''
-import os
+import __main__
+import glob
import stat
import string
-import getopt
-import sys
-import __main__
-import operator
-# Handle bug in Python 1.6-2.1
#
-# there are recursion limits for some patterns in Python 1.6 til 2.1.
-# fix this by importing the 1.5.2 implementation pre instead. Fix by Mats.
-
-if float (sys.version[0:3]) < 2.2:
- try:
- import pre
- re = pre
- del pre
- except ImportError:
- import re
-else:
- import re
-
-# Attempt to fix problems with limited stack size set by Python!
-# Sets unlimited stack size. Note that the resource module only
-# is available on UNIX.
-try:
- import resource
- resource.setrlimit (resource.RLIMIT_STACK, (-1, -1))
-except:
- pass
-
-errorport = sys.stderr
-verbose_p = 0
+# TODO:
+#
+# * use --png --ps --pdf for making images?
+#
+################################################################
+# Users of python modules should include this snippet
+# and customize variables below.
+
+# We'll suffer this path init stuff as long as we don't install our
+# python packages in <prefix>/lib/pythonx.y (and don't kludge around
+# it as we do with teTeX on Red Hat Linux: set some environment var
+# (PYTHONPATH) in profile)
+
+# If set, LILYPONDPREFIX must take prevalence
+# if datadir is not set, we're doing a build and LILYPONDPREFIX
+import getopt, os, sys
+datadir = '@local_lilypond_datadir@'
+if not os.path.isdir (datadir):
+ datadir = '@lilypond_datadir@'
+if os.environ.has_key ('LILYPONDPREFIX') :
+ datadir = os.environ['LILYPONDPREFIX']
+ while datadir[-1] == os.sep:
+ datadir= datadir[:-1]
+sys.path.insert (0, os.path.join (datadir, 'python'))
-try:
- import gettext
- gettext.bindtextdomain ('lilypond', localedir)
- gettext.textdomain ('lilypond')
- _ = gettext.gettext
-except:
- def _ (s):
- return s
+# Customize these
+#if __name__ == '__main__':
-def progress (s):
- errorport.write (s + '\n')
+import lilylib as ly
+global _;_=ly._
+global re;re = ly.re
+# lilylib globals
program_version = '@TOPLEVEL_VERSION@'
-if program_version == '@' + 'TOPLEVEL_VERSION' + '@':
- program_version = '1.5.53'
-
-# if set, LILYPONDPREFIX must take prevalence
-# if datadir is not set, we're doing a build and LILYPONDPREFIX
-datadir = '@datadir@'
-
-if os.environ.has_key ('LILYPONDPREFIX') :
- datadir = os.environ['LILYPONDPREFIX']
-else:
- datadir = '@datadir@'
-
-while datadir[-1] == os.sep:
- datadir= datadir[:-1]
-
-kpse = os.popen ('kpsexpand \$TEXMF').read()
-kpse = re.sub('[ \t\n]+$','', kpse)
-type1_paths = os.popen ('kpsewhich -expand-path=\$T1FONTS').read ()
-
-environment = {
- # TODO: * prevent multiple addition.
- # * clean TEXINPUTS, MFINPUTS, TFMFONTS,
- # as these take prevalence over $TEXMF
- # and thus may break tex run?
- 'TEXMF' : "{%s,%s}" % (datadir, kpse) ,
- 'GS_FONTPATH' : type1_paths,
- 'GS_LIB' : datadir + '/ps',
-}
-
-# tex needs lots of memory, more than it gets by default on Debian
-non_path_environment = {
- 'extra_mem_top' : '1000000',
- 'extra_mem_bottom' : '1000000',
- 'pool_size' : '250000',
-}
+program_name = sys.argv[0]
+verbose_p = 0
+pseudo_filter_p = 0
+original_dir = os.getcwd ()
-def setup_environment ():
- # $TEXMF is special, previous value is already taken care of
- if os.environ.has_key ('TEXMF'):
- del os.environ['TEXMF']
-
- for key in environment.keys ():
- val = environment[key]
- if os.environ.has_key (key):
- val = val + os.pathsep + os.environ[key]
- os.environ[key] = val
-
- for key in non_path_environment.keys ():
- val = non_path_environment[key]
- os.environ[key] = val
-
-include_path = [os.getcwd()]
-
-
-# g_ is for global (?)
-g_extra_opts = ''
-g_here_dir = os.getcwd ()
-g_dep_prefix = ''
-g_outdir = ''
-g_force_lilypond_fontsize = 0
-g_read_lys = 0
-g_do_pictures = 1
-g_num_cols = 1
-g_do_music = 1
-
-format = ''
-g_run_lilypond = 1
-no_match = 'a\ba'
-default_music_fontsize = 16
-default_text_fontsize = 12
-paperguru = None
-
-# this code is ugly. It should be cleaned
-class LatexPaper:
- def __init__(self):
- self.m_paperdef = {
- # the dimensions are from geometry.sty
- 'a0paper': (mm2pt(841), mm2pt(1189)),
- 'a1paper': (mm2pt(595), mm2pt(841)),
- 'a2paper': (mm2pt(420), mm2pt(595)),
- 'a3paper': (mm2pt(297), mm2pt(420)),
- 'a4paper': (mm2pt(210), mm2pt(297)),
- 'a5paper': (mm2pt(149), mm2pt(210)),
- 'b0paper': (mm2pt(1000), mm2pt(1414)),
- 'b1paper': (mm2pt(707), mm2pt(1000)),
- 'b2paper': (mm2pt(500), mm2pt(707)),
- 'b3paper': (mm2pt(353), mm2pt(500)),
- 'b4paper': (mm2pt(250), mm2pt(353)),
- 'b5paper': (mm2pt(176), mm2pt(250)),
- 'letterpaper': (in2pt(8.5), in2pt(11)),
- 'legalpaper': (in2pt(8.5), in2pt(14)),
- 'executivepaper': (in2pt(7.25), in2pt(10.5))}
- self.m_use_geometry = None
- self.m_papersize = 'letterpaper'
- self.m_fontsize = 10
- self.m_num_cols = 1
- self.m_landscape = 0
- self.m_geo_landscape = 0
- self.m_geo_width = None
- self.m_geo_textwidth = None
- self.m_geo_lmargin = None
- self.m_geo_rmargin = None
- self.m_geo_columnsep = 0.0
- self.m_geo_includemp = None
- self.m_geo_marginparwidth = {10: 57, 11: 50, 12: 35}
- self.m_geo_marginparsep = {10: 11, 11: 10, 12: 10}
- self.m_geo_x_marginparwidth = None
- self.m_geo_x_marginparsep = None
- self.__body = None
- def set_geo_option(self, name, value):
-
- if type(value) == type([]):
- value = map(conv_dimen_to_float, value)
- else:
- value = conv_dimen_to_float(value)
-
- if name == 'body' or name == 'text':
- if type(value) == type([]):
- self.m_geo_textwidth = value[0]
- else:
- self.m_geo_textwidth = value
- self.__body = 1
- elif name == 'portrait':
- self.m_geo_landscape = 0
- elif name == 'reversemp' or name == 'reversemarginpar':
- if self.m_geo_includemp == None:
- self.m_geo_includemp = 1
- elif name == 'marginparwidth' or name == 'marginpar':
- self.m_geo_x_marginparwidth = value
- self.m_geo_includemp = 1
- elif name == 'marginparsep':
- self.m_geo_x_marginparsep = value
- self.m_geo_includemp = 1
- elif name == 'scale':
- if type(value) == type([]):
- self.m_geo_width = self.get_paperwidth() * value[0]
- else:
- self.m_geo_width = self.get_paperwidth() * value
- elif name == 'hscale':
- self.m_geo_width = self.get_paperwidth() * value
- elif name == 'left' or name == 'lmargin':
- self.m_geo_lmargin = value
- elif name == 'right' or name == 'rmargin':
- self.m_geo_rmargin = value
- elif name == 'hdivide' or name == 'divide':
- if value[0] not in ('*', ''):
- self.m_geo_lmargin = value[0]
- if value[1] not in ('*', ''):
- self.m_geo_width = value[1]
- if value[2] not in ('*', ''):
- self.m_geo_rmargin = value[2]
- elif name == 'hmargin':
- if type(value) == type([]):
- self.m_geo_lmargin = value[0]
- self.m_geo_rmargin = value[1]
- else:
- self.m_geo_lmargin = value
- self.m_geo_rmargin = value
- elif name == 'margin':#ugh there is a bug about this option in
- # the geometry documentation
- if type(value) == type([]):
- self.m_geo_lmargin = value[0]
- self.m_geo_rmargin = value[0]
- else:
- self.m_geo_lmargin = value
- self.m_geo_rmargin = value
- elif name == 'columnsep':
- self.m_geo_columnsep = value
- elif name == 'total':
- if type(value) == type([]):
- self.m_geo_width = value[0]
- else:
- self.m_geo_width = value
- elif name == 'width' or name == 'totalwidth':
- self.m_geo_width = value
- elif name == 'paper' or name == 'papername':
- self.m_papersize = value
- elif name[-5:] == 'paper':
- self.m_papersize = name
- else:
- pass
+help_summary = _ ("""Process LilyPond snippets in hybrid HTML, LaTeX or texinfo document.
+Example usage:
- def __setattr__(self, name, value):
- if type(value) == type("") and \
- dimension_conversion_dict.has_key (value[-2:]):
- f = dimension_conversion_dict[value[-2:]]
- self.__dict__[name] = f(float(value[:-2]))
- else:
- self.__dict__[name] = value
-
- def __str__(self):
- s = "LatexPaper:\n-----------"
- for v in self.__dict__.keys():
- if v[:2] == 'm_':
- s = s + str (v) + ' ' + str (self.__dict__[v])
- s = s + "-----------"
- return s
-
- def get_linewidth(self):
- w = self._calc_linewidth()
- if self.m_num_cols == 2:
- return (w - 10) / 2
- else:
- return w
- def get_paperwidth(self):
- #if self.m_use_geometry:
- return self.m_paperdef[self.m_papersize][self.m_landscape or self.m_geo_landscape]
- #return self.m_paperdef[self.m_papersize][self.m_landscape]
-
- def _calc_linewidth(self):
- # since geometry sometimes ignores 'includemp', this is
- # more complicated than it should be
- mp = 0
- if self.m_geo_includemp:
- if self.m_geo_x_marginparsep is not None:
- mp = mp + self.m_geo_x_marginparsep
- else:
- mp = mp + self.m_geo_marginparsep[self.m_fontsize]
- if self.m_geo_x_marginparwidth is not None:
- mp = mp + self.m_geo_x_marginparwidth
- else:
- mp = mp + self.m_geo_marginparwidth[self.m_fontsize]
-
- #ugh test if this is necessary
- if self.__body:
- mp = 0
- if self.m_num_cols == 1:
- self.m_geo_columnsep = 0.0
-
- if not self.m_use_geometry:
- return latex_linewidths[self.m_papersize][self.m_fontsize]
- else:
- geo_opts = (self.m_geo_lmargin == None,
- self.m_geo_width == None,
- self.m_geo_rmargin == None)
-
- if geo_opts == (1, 1, 1):
- if self.m_geo_textwidth:
- return self.m_geo_textwidth - self.m_geo_columnsep
- w = self.get_paperwidth() * 0.8 - self.m_geo_columnsep
- return w - mp
- elif geo_opts == (0, 1, 1):
- if self.m_geo_textwidth:
- return self.m_geo_textwidth - self.m_geo_columnsep
- return self.f1(self.m_geo_lmargin, mp)
- elif geo_opts == (1, 1, 0):
- if self.m_geo_textwidth:
- return self.m_geo_textwidth - self.m_geo_columnsep
- return self.f1(self.m_geo_rmargin, mp)
- elif geo_opts \
- in ((0, 0, 1), (1, 0, 0), (1, 0, 1)):
- if self.m_geo_textwidth:
- return self.m_geo_textwidth - self.m_geo_columnsep
- return self.m_geo_width - mp - self.m_geo_columnsep
- elif geo_opts in ((0, 1, 0), (0, 0, 0)):
- w = self.get_paperwidth() - self.m_geo_lmargin \
- - self.m_geo_rmargin - mp - self.m_geo_columnsep
- if w < 0:
- w = 0
- return w
- raise "Never do this!"
- def f1(self, m, mp):
- tmp = self.get_paperwidth() - m * 2 - mp - self.m_geo_columnsep
- if tmp < 0:
- tmp = 0
- return tmp
- def f2(self):
- tmp = self.get_paperwidth() - self.m_geo_lmargin \
- - self.m_geo_rmargin
- if tmp < 0:
- return 0
- return tmp
-
-class HtmlPaper:
- def __init__(self):
- self.m_papersize = 'letterpaper'
- self.m_fontsize = 12
- def get_linewidth(self):
- return html_linewidths[self.m_papersize][self.m_fontsize]
-
-class TexiPaper:
- def __init__(self):
- self.m_papersize = 'letterpaper'
- self.m_fontsize = 12
- def get_linewidth(self):
- return texi_linewidths[self.m_papersize][self.m_fontsize]
-
-def mm2pt(x):
- return x * 2.8452756
-def in2pt(x):
- return x * 72.26999
-def em2pt(x, fontsize = 10):
- return {10: 10.00002, 11: 10.8448, 12: 11.74988}[fontsize] * x
-def ex2pt(x, fontsize = 10):
- return {10: 4.30554, 11: 4.7146, 12: 5.16667}[fontsize] * x
-
-def pt2pt(x):
- return x
-
-dimension_conversion_dict ={
- 'mm': mm2pt,
- 'cm': lambda x: mm2pt(10*x),
- 'in': in2pt,
- 'em': em2pt,
- 'ex': ex2pt,
- 'pt': pt2pt
- }
+ lilypond-book --filter="tr '[a-z]' '[A-Z]'" BOOK
+ lilypond-book --filter="convert-ly --no-version --from=2.0.0 -" BOOK
+ lilypond-book --process='lilypond -I include' BOOK
-# Convert numeric values, with or without specific dimension, to floats.
-# Keep other strings
-def conv_dimen_to_float(value):
- if type(value) == type(""):
- m = re.match ("([0-9.]+)(cm|in|pt|mm|em|ex)",value)
- if m:
- unit = m.group (2)
- num = string.atof(m.group (1))
- conv = dimension_conversion_dict[m.group(2)]
-
- value = conv(num)
-
- elif re.match ("^[0-9.]+$",value):
- value = float(value)
+""")
- return value
-
-
-# latex linewidths:
-# indices are no. of columns, papersize, fontsize
-# Why can't this be calculated?
-latex_linewidths = {
- 'a4paper':{10: 345, 11: 360, 12: 390},
- 'a4paper-landscape': {10: 598, 11: 596, 12:592},
- 'a5paper':{10: 276, 11: 276, 12: 276},
- 'b5paper':{10: 345, 11: 356, 12: 356},
- 'letterpaper':{10: 345, 11: 360, 12: 390},
- 'letterpaper-landscape':{10: 598, 11: 596, 12:596},
- 'legalpaper': {10: 345, 11: 360, 12: 390},
- 'executivepaper':{10: 345, 11: 360, 12: 379}}
-
-texi_linewidths = {
- 'afourpaper': {12: mm2pt(160)},
- 'afourwide': {12: in2pt(6.5)},
- 'afourlatex': {12: mm2pt(150)},
- 'smallbook': {12: in2pt(5)},
- 'letterpaper': {12: in2pt(6)}}
-
-html_linewidths = {
- 'afourpaper': {12: mm2pt(160)},
- 'afourwide': {12: in2pt(6.5)},
- 'afourlatex': {12: mm2pt(150)},
- 'smallbook': {12: in2pt(5)},
- 'letterpaper': {12: in2pt(6)}}
+copyright = ('Jan Nieuwenhuizen <janneke@gnu.org>',
+ 'Han-Wen Nienhuys <hanwen@cs.uu.nl>')
option_definitions = [
- ('EXT', 'f', 'format', 'use output format EXT (texi [default], latex, html)'),
- ('DIM', '', 'default-music-fontsize', 'default fontsize for music. DIM is assumed to be in points'),
- ('DIM', '', 'default-lilypond-fontsize', 'deprecated, use --default-music-fontsize'),
- ('OPT', '', 'extra-options' , 'Pass OPT quoted to the lilypond command line'),
- ('DIM', '', 'force-music-fontsize', 'force fontsize for all inline lilypond. DIM is assumed be to in points'),
- ('DIM', '', 'force-lilypond-fontsize', 'deprecated, use --force-music-fontsize'),
- ('', 'h', 'help', 'this help'),
- ('DIR', 'I', 'include', 'include path'),
- ('', 'M', 'dependencies', 'write dependencies'),
- ('PREF', '', 'dep-prefix', 'prepend PREF before each -M dependency'),
- ('', 'n', 'no-lily', 'don\'t run lilypond'),
- ('', '', 'no-pictures', "don\'t generate pictures"),
- ('', '', 'no-music', "strip all lilypond blocks from output"),
- ('', '', 'read-lys', "don't write ly files."),
- ('FILE', 'o', 'outname', 'filename main output file'),
- ('FILE', '', 'outdir', "where to place generated files"),
- ('', 'V', 'verbose', 'verbose' ),
- ('', 'v', 'version', 'print version information' ),
+ (_ ("EXT"), 'f', 'format', _ ("use output format EXT (texi [default], texi-html, latex, html)")),
+ (_ ("FILTER"), 'F', 'filter', _ ("pipe snippets through FILTER [convert-ly -n -]")),
+ ('', 'h', 'help', _ ("print this help")),
+ (_ ("DIR"), 'I', 'include', _ ("add DIR to include path")),
+ (_ ("COMMAND"), 'P', 'process', _ ("process ly_files using COMMAND FILE...")),
+ (_ ("DIR"), 'o', 'output', _ ("write output to DIR")),
+ ('', 'V', 'verbose', _ ("be verbose")),
+ ('', 'v', 'version', _ ("print version information")),
+ ('', 'w', 'warranty', _ ("show warranty and copyright")),
]
-# format specific strings, ie. regex-es for input, and % strings for output
-output_dict= {
- 'html' : {'output-lilypond': '''<lilypond%s>
-%s
-</lilypond>''',
- 'output-filename' : r'''
-
-<pre>%s</pre>:''',
- 'output-lilypond-fragment': '''<lilypond%s>
-\context Staff\context Voice{ %s }
-</lilypond>''',
- 'output-noinline': r'''
-<!-- generated: %(fn)s.png !-->
-''',
- ## maybe <hr> ?
- 'pagebreak': None,
- 'output-verbatim': r'''<pre>
-%s
-</pre>''',
- ## Ugh we need to differentiate on origin:
- ## lilypond-block origin wants an extra <p>, but
- ## inline music doesn't.
- ## possibly other center options?
- 'output-all': r'''
-<a href="%(fn)s.png">
-<img align="center" valign="center" border="0" src="%(fn)s.png" alt="[picture of music]"></a>
-''',
- },
- 'latex': {
- 'output-lilypond-fragment' : r'''\begin[eps,singleline,%s]{lilypond}
- \context Staff <
- \context Voice{
- %s
- }
- >
-\end{lilypond}''',
- 'output-filename' : r'''
+include_path = [ly.abspath (os.getcwd ())]
+lilypond_binary = os.path.join ('@bindir@', 'lilypond')
-\verb+%s+:''',
- 'output-lilypond': r'''\begin[%s]{lilypond}
-%s
-\end{lilypond}
-''',
- 'output-verbatim': r'''\begin{verbatim}%s\end{verbatim}%%
-''',
- 'output-default-post': "\\def\postLilypondExample{}\n",
- 'output-default-pre': "\\def\preLilypondExample{}\n",
- 'usepackage-graphics': '\\usepackage{graphics}\n',
- 'output-eps': '\\noindent\\parbox{\\lilypondepswidth{%(fn)s.eps}}{\includegraphics{%(fn)s.eps}}',
- 'output-noinline': r'''
-%% generated: %(fn)s.eps
-''',
- 'output-tex': '{\\preLilypondExample \\input %(fn)s.tex \\postLilypondExample\n}',
- 'pagebreak': r'\pagebreak',
- },
-
- 'texi' : {'output-lilypond': '''@lilypond[%s]
-%s
-@end lilypond
-''',
- 'output-filename' : r'''
-
-@file{%s}:''',
- 'output-lilypond-fragment': '''@lilypond[%s]
-\context Staff\context Voice{ %s }
-@end lilypond ''',
- 'output-noinline': r'''
-@c generated: %(fn)s.png
-''',
- 'pagebreak': None,
- 'output-verbatim': r'''@example
-%s
-@end example
-''',
+# only use installed binary when we're installed too.
+if '@bindir@' == ('@' + 'bindir@') or not os.path.exists (lilypond_binary):
+ lilypond_binary = 'lilypond'
-# do some tweaking: @ is needed in some ps stuff.
-# override EndLilyPondOutput, since @tex is done
-# in a sandbox, you can't do \input lilyponddefs at the
-# top of the document.
-# should also support fragment in
+use_hash_p = 1
+format = 0
+output_name = 0
+latex_filter_cmd = 'latex "\\nonstopmode \input /dev/stdin"'
+filter_cmd = 0
+process_cmd = ''
+default_ly_options = {}
-# ugh, the <p> below breaks inline images...
-
- 'output-all': r'''
-@tex
-\catcode`\@=12
-\input lilyponddefs
-\def\EndLilyPondOutput{}
-\input %(fn)s.tex
-\catcode`\@=0
-@end tex
-@html
-<p>
-<a href="%(fn)s.png">
-<img border=0 src="%(fn)s.png" alt="[picture of music]">
-</a>
-@end html
-''',
- }
-
+#
+# is this pythonic? Personally, I find this rather #define-nesque. --hwn
+#
+AFTER = 'after'
+BEFORE = 'before'
+BOOKPAPER = 'bookpaper'
+EXAMPLEINDENT = 'exampleindent'
+FILTER = 'filter'
+FRAGMENT = 'fragment'
+HTML = 'html'
+INDENT = 'indent'
+LATEX = 'latex'
+LINEWIDTH = 'linewidth'
+NOFRAGMENT = 'nofragment'
+NOINDENT = 'noindent'
+NOTES = 'body'
+NOTIME = 'notime'
+OUTPUT = 'output'
+PAPER = 'paper'
+PREAMBLE = 'preamble'
+PRINTFILENAME = 'printfilename'
+QUOTE = 'quote'
+RAGGEDRIGHT = 'raggedright'
+RELATIVE = 'relative'
+STAFFSIZE = 'staffsize'
+TEXIDOC = 'texidoc'
+TEXINFO = 'texinfo'
+VERBATIM = 'verbatim'
+
+# Recognize special sequences in the input
+#
+# (?P<name>regex) -- assign result of REGEX to NAME
+# *? -- match non-greedily.
+# (?m) -- multiline regex: make ^ and $ match at each line
+# (?s) -- make the dot match all characters including newline
+no_match = 'a\ba'
+snippet_res = {
+ HTML: {
+ 'include': no_match,
+ 'lilypond' : '(?m)(?P<match><lilypond((?P<options>[^:]*):)(?P<code>.*?)/>)',
+ 'lilypond_block': r'''(?ms)(?P<match><lilypond(?P<options>[^>]+)?>(?P<code>.*?)</lilypond>)''',
+ 'lilypond_file': r'(?m)(?P<match><lilypondfile(?P<options>[^>]+)?>\s*(?P<filename>[^<]+)\s*</lilypondfile>)',
+ 'multiline_comment': r"(?sm)\s*(?!@c\s+)(?P<code><!--\s.*?!-->)\s",
+ 'singleline_comment': no_match,
+ 'verb': r'''(?P<code><pre>.*?</pre>)''',
+ 'verbatim': r'''(?s)(?P<code><pre>\s.*?</pre>\s)''',
+ },
+
+ LATEX: {
+ 'include': r'(?m)^[^%\n]*?(?P<match>\\input{(?P<filename>[^}]+)})',
+ 'lilypond' : r'(?m)^[^%\n]*?(?P<match>\\lilypond\s*(\[(?P<options>.*?)\])?\s*{(?P<code>.*?)})',
+ 'lilypond_block': r"(?sm)^[^%\n]*?(?P<match>\\begin\s*(\[(?P<options>.*?)\])?\s*{lilypond}(?P<code>.*?)\\end{lilypond})",
+ 'lilypond_file': r'(?m)^[^%\n]*?(?P<match>\\lilypondfile\s*(\[(?P<options>.*?)\])?\s*\{(?P<filename>.+)})',
+ 'multiline_comment': no_match,
+ 'singleline_comment': r"(?m)^.*?(?P<match>(?P<code>^%.*$\n+))",
+ 'verb': r"(?P<code>\\verb(?P<del>.).*?(?P=del))",
+ 'verbatim': r"(?s)(?P<code>\\begin\s*{verbatim}.*?\\end{verbatim})",
+ },
+
+ TEXINFO: {
+ 'include': '(?m)^[^%\n]*?(?P<match>@include\s+(?P<filename>\S+))',
+ 'lilypond' : '(?m)^(?P<match>@lilypond(\[(?P<options>[^]]*)\])?{(?P<code>.*?)})',
+ 'lilypond_block': r'''(?ms)^(?P<match>@lilypond(\[(?P<options>[^]]*)\])?\s(?P<code>.*?)@end lilypond)\s''',
+ 'lilypond_file': '(?m)^(?P<match>@lilypondfile(\[(?P<options>[^]]*)\])?{(?P<filename>[^}]+)})',
+ 'multiline_comment': r'(?sm)^\s*(?!@c\s+)(?P<code>@ignore\s.*?@end\s+ignore)\s',
+ 'singleline_comment': r'(?m)^.*(?P<match>(?P<code>@c([ \t][^\n]*|)\n))',
+
+# don't do this: fucks up with @code{@{}
+# 'verb': r'''(?P<code>@code{.*?})''',
+ 'verbatim': r'''(?s)(?P<code>@example\s.*?@end\s+example\s)''',
+ },
}
-def output_verbatim (body):
- if __main__.format == 'html':
- body = re.sub ('&', '&', body)
- body = re.sub ('>', '>', body)
- body = re.sub ('<', '<', body)
- elif __main__.format == 'texi':
- body = re.sub ('([@{}])', '@\\1', body)
- return get_output ('output-verbatim') % body
-
-
-#warning: this uses extended regular expressions. Tread with care.
-
-# legenda
+format_res = {
+ HTML: {
+ 'option-sep' : '\s*',
+ 'intertext': r',?\s*intertext=\".*?\"',
+ },
+ LATEX: {
+ 'intertext': r',?\s*intertext=\".*?\"',
+ 'option-sep' : ',\s*',
+ },
+ TEXINFO: {
+ 'intertext': r',?\s*intertext=\".*?\"',
+ 'option-sep' : ',\s*',
+ },
+ }
-# (?P -- name parameter
-# *? -- match non-greedily.
-# (?m) -- ?
-re_dict = {
- 'html': {
- 'include': no_match,
- 'input': no_match,
- 'header': no_match,
- 'preamble-end': no_match,
- 'landscape': no_match,
- 'verbatim': r'''(?s)(?P<code><pre>\s.*?</pre>\s)''',
- 'verb': r'''(?P<code><pre>.*?</pre>)''',
- 'lilypond-file': r'(?m)(?P<match><lilypondfile(?P<options>[^>]+)?>\s*(?P<filename>[^<]+)\s*</lilypondfile>)',
- 'lilypond' : '(?m)(?P<match><lilypond((?P<options>[^:]*):)(?P<code>.*?)/>)',
- 'lilypond-block': r'''(?ms)(?P<match><lilypond(?P<options>[^>]+)?>(?P<code>.*?)</lilypond>)''',
- 'option-sep' : '\s*',
- 'intertext': r',?\s*intertext=\".*?\"',
- 'multiline-comment': r"(?sm)\s*(?!@c\s+)(?P<code><!--\s.*?!-->)\s",
- 'singleline-comment': no_match,
- 'numcols': no_match,
- },
-
- 'latex': {'input': r'(?m)^[^%\n]*?(?P<match>\\mbinput{?([^}\t \n}]*))',
- 'include': r'(?m)^[^%\n]*?(?P<match>\\mbinclude{(?P<filename>[^}]+)})',
- 'option-sep' : ',\s*',
- 'header': r"\\documentclass\s*(\[.*?\])?",
- 'geometry': r"^(?m)[^%\n]*?\\usepackage\s*(\[(?P<options>.*)\])?\s*{geometry}",
- 'preamble-end': r'(?P<code>\\begin{document})',
- 'verbatim': r"(?s)(?P<code>\\begin{verbatim}.*?\\end{verbatim})",
- 'verb': r"(?P<code>\\verb(?P<del>.).*?(?P=del))",
- 'lilypond-file': r'(?m)^[^%\n]*?(?P<match>\\lilypondfile\s*(\[(?P<options>.*?)\])?\s*\{(?P<filename>.+)})',
- 'lilypond' : r'(?m)^[^%\n]*?(?P<match>\\lilypond\s*(\[(?P<options>.*?)\])?\s*{(?P<code>.*?)})',
- 'lilypond-block': r"(?sm)^[^%\n]*?(?P<match>\\begin\s*(\[(?P<options>.*?)\])?\s*{lilypond}(?P<code>.*?)\\end{lilypond})",
- 'def-post-re': r"\\def\\postLilypondExample",
- 'def-pre-re': r"\\def\\preLilypondExample",
- 'usepackage-graphics': r"\usepackage{graphics}",
- 'intertext': r',?\s*intertext=\".*?\"',
- 'multiline-comment': no_match,
- 'singleline-comment': r"(?m)^.*?(?P<match>(?P<code>^%.*$\n+))",
- 'numcols': r"(?P<code>\\(?P<num>one|two)column)",
- },
-
-
- # why do we have distinction between @mbinclude and @include?
+ly_options = {
+ NOTES: {
+ RELATIVE: r'''\relative c%(relative_quotes)s''',
+ },
+ BOOKPAPER: {
+ INDENT : r'''
+ indent = %(indent)s''',
+ 'linewidth' : r'''
+ linewidth = %(linewidth)s''',
+ NOINDENT : r'''
+ indent = 0.0\mm''',
+ QUOTE : r'''
+ linewidth = %(linewidth)s - 2.0 * %(exampleindent)s
+''',
+ RAGGEDRIGHT : r'''
+ indent = 0.0\mm
+ raggedright = ##t''',
+ },
+
+ ##
+ PAPER: {
+ EXAMPLEINDENT : '',
+
+ NOTIME : r'''
+ \context {
+ \Staff
+ \remove Time_signature_engraver
+ }''',
+ },
+
+ ##
+ PREAMBLE: {
+ STAFFSIZE: r'''
+#(set-global-staff-size %(staffsize)s)''',
+ },
+ }
+output = {
+ HTML : {
+ FILTER: r'''<lilypond %(options)s>
+%(code)s
+</lilypond>
+''',
- 'texi': {
- 'include': '(?m)^[^%\n]*?(?P<match>@mbinclude[ \n\t]+(?P<filename>[^\t \n]*))',
- 'input': no_match,
- 'header': no_match,
- 'preamble-end': no_match,
- 'landscape': no_match,
- 'verbatim': r'''(?s)(?P<code>@example\s.*?@end example\s)''',
- 'verb': r'''(?P<code>@code{.*?})''',
- 'lilypond-file': '(?m)^(?P<match>@lilypondfile(\[(?P<options>[^]]*)\])?{(?P<filename>[^}]+)})',
- 'lilypond' : '(?m)^(?P<match>@lilypond(\[(?P<options>[^]]*)\])?{(?P<code>.*?)})',
- 'lilypond-block': r'''(?ms)^(?P<match>@lilypond(\[(?P<options>[^]]*)\])?\s(?P<code>.*?)@end +lilypond)\s''',
- 'option-sep' : ',\s*',
- 'intertext': r',?\s*intertext=\".*?\"',
- 'multiline-comment': r"(?sm)^\s*(?!@c\s+)(?P<code>@ignore\s.*?@end ignore)\s",
- 'singleline-comment': r"(?m)^.*?(?P<match>(?P<code>@c.*$\n+))",
- 'numcols': no_match,
- }
+ AFTER: r'''
+ </a>
+</p>''',
+ BEFORE: r'''
+<p>
+ <a href="%(base)s.ly">''',
+ OUTPUT: r'''
+ <img align="center" valign="center"
+ border="0" src="%(image)s" alt="[image of music]">''',
+ PRINTFILENAME:'<p><tt><a href="%(base)s.ly">%(filename)s</a></tt></p>',
+ QUOTE: r'''<blockquote>
+%(str)s
+</blockquote>
+''',
+ VERBATIM: r'''<pre>
+%(verb)s</pre>''',
+ },
+
+ LATEX : {
+ AFTER: '',
+ BEFORE: '',
+ OUTPUT: r'''{\parindent 0pt
+\catcode`\@=12
+\ifx\preLilyPondExample\undefined\relax\else\preLilyPondExample\fi
+\def\lilypondbook{}
+\input %(base)s.tex
+\ifx\postLilyPondExample\undefined\relax\else\postLilyPondExample\fi
+\catcode`\@=0}''',
+ PRINTFILENAME: '''\\texttt{%(filename)s}
+
+ ''',
+ QUOTE: r'''\begin{quotation}
+%(str)s
+\end{quotation}
+''',
+ VERBATIM: r'''\noindent
+\begin{verbatim}
+%(verb)s\end{verbatim}
+''',
+ FILTER: r'''\begin{lilypond}[%(options)s]
+%(code)s
+\end{lilypond}''',
+ },
+
+ TEXINFO : {
+ FILTER: r'''@lilypond[%(options)s]
+%(code)s
+@lilypond''',
+ AFTER: '',
+ BEFORE: '',
+ OUTPUT: r'''@noindent
+@image{%(base)s,,,[image of music],%(ext)s}
+''',
+ PRINTFILENAME: '''@file{%(filename)s}
+
+ ''',
+ QUOTE: r'''@quotation
+%(str)s
+@end quotation
+''',
+ # FIXME: @exampleindent 5 is the default...
+ VERBATIM: r'''@exampleindent 0
+@example
+%(verb)s@end example
+@exampleindent 5
+''',
+ },
}
+PREAMBLE_LY = r'''%%%% Generated by %(program_name)s
+%%%% Options: [%(option_string)s]
+#(set! toplevel-score-handler ly:parser-print-score)
+#(set! toplevel-music-handler (lambda (p m)
+ (ly:parser-print-score
+ p (ly:music-scorify m p))
+ ))
+%(preamble_string)s
+\bookpaper {%(bookpaper_string)s
+}
+\paper { %(paper_string)s
+}
-for r in re_dict.keys ():
- olddict = re_dict[r]
- newdict = {}
- for k in olddict.keys ():
- try:
- newdict[k] = re.compile (olddict[k])
- except:
- print 'invalid regexp: %s' % olddict[k]
+'''
- # we'd like to catch and reraise a more detailed error, but
- # alas, the exceptions changed across the 1.5/2.1 boundary.
- raise "Invalid re"
- re_dict[r] = newdict
+FRAGMENT_LY = r'''
+ %(notes_string)s{
+ %(code)s }
+'''
+FULL_LY = '%(code)s'
+texinfo_linewidths = {
+ '@afourpaper': '160 \\mm',
+ '@afourwide': '6.5 \\in',
+ '@afourlatex': '150 \\mm',
+ '@smallbook': '5 \\in' ,
+ '@letterpaper': '6\\in',
+ }
+
+def classic_lilypond_book_compatibility (o):
+ if o == 'singleline':
+ return RAGGEDRIGHT
+ m = re.search ('relative\s*([-0-9])', o)
+ if m:
+ return 'relative=%s' % m.group (1)
+ m = re.match ('([0-9]+)pt', o)
+ if m:
+ return 'staffsize=%s' % m.group (1)
+ m = re.match ('indent=([-.0-9]+)(cm|in|mm|pt|staffspace)', o)
+ if m:
+ f = float (m.group (1))
+ return 'indent=%f\\%s' % (f, m.group (2))
+ m = re.match ('linewidth=([-.0-9]+)(cm|in|mm|pt|staffspace)', o)
+ if m:
+ f = float (m.group (1))
+ return 'linewidth=%f\\%s' % (f, m.group (2))
+ return None
+
+def compose_ly (code, options):
+ #Hmm
+ for i in default_ly_options.keys ():
+ if i not in options:
+ options.append (i)
-def uniq (list):
- list.sort ()
- s = list
- list = []
- for x in s:
- if x not in list:
- list.append (x)
- return list
+ #Hmm
+ if QUOTE in options and LINEWIDTH in options:
+ options.remove (LINEWIDTH)
+
+ if FRAGMENT in options:
+ if RAGGEDRIGHT not in options:
+ options.append (RAGGEDRIGHT)
+ body = FRAGMENT_LY
+ else:
+ body = FULL_LY
+
+ # defaults
+ relative = 1
+ staffsize = 16
+ override = {}
+ override.update (default_ly_options)
+ #FIXME: where to get sane value for exampleindent?
+ override[EXAMPLEINDENT] = r'9.0 \mm'
+
+ option_string = string.join (options, ',')
+
+ options_dict = {}
+ option_types = [NOTES, PREAMBLE, PAPER, BOOKPAPER]
+ for a in option_types:
+ options_dict[a] = []
+
+ for i in options:
+ c = classic_lilypond_book_compatibility (i)
+ if c:
+ ly.warning (_ ("deprecated ly-option used: %s" % i))
+ ly.warning (_ ("compatibility mode translation: %s" \
+ % c))
+ i = c
+ if string.find (i, '=') > 0:
+ key, value = string.split (i, '=')
+ override[key] = value
+ else:
+ key = i
+ if not override.has_key (i):
+ override[i] = None
-def get_output (name):
- return output_dict[format][name]
+ found = 0
+ for type in option_types:
+ if ly_options[type].has_key (key):
+
+ options_dict[type].append (ly_options[type][key])
+ found = 1
+ break
-def get_re (name):
- return re_dict[format][name]
+ if not found and key not in (FRAGMENT, NOFRAGMENT, PRINTFILENAME,
+ RELATIVE, VERBATIM, TEXIDOC):
+ ly.warning (_("ignoring unknown ly option: %s") % i)
-def bounding_box_dimensions(fname):
- if g_outdir:
- fname = os.path.join(g_outdir, fname)
- try:
- fd = open(fname)
- except IOError:
- error ("Error opening `%s'" % fname)
- str = fd.read ()
- s = re.search('%%BoundingBox: ([0-9]+) ([0-9]+) ([0-9]+) ([0-9]+)', str)
- if s:
-
- gs = map (lambda x: string.atoi (x), s.groups ())
- return (int (gs[2] - gs[0] + 0.5),
- int (gs[3] - gs[1] + 0.5))
- else:
- return (0,0)
-
-def error (str):
- sys.stderr.write (str + "\n Exiting ... \n\n")
- raise 'Exiting.'
-
-
-def compose_full_body (body, opts):
- '''Construct the lilypond code to send to Lilypond.
- Add stuff to BODY using OPTS as options.'''
- music_size = default_music_fontsize
- latex_size = default_text_fontsize
- indent = ''
- linewidth = ''
- for o in opts:
- if g_force_lilypond_fontsize:
- music_size = g_force_lilypond_fontsize
- else:
- m = re.match ('([0-9]+)pt', o)
- if m:
- music_size = string.atoi(m.group (1))
+ #URGS
+ if RELATIVE in override.keys () and override[RELATIVE]:
+ relative = string.atoi (override[RELATIVE])
- m = re.match ('latexfontsize=([0-9]+)pt', o)
- if m:
- latex_size = string.atoi (m.group (1))
-
- m = re.match ('indent=([-.0-9]+)(cm|in|mm|pt)', o)
- if m:
- f = float (m.group (1))
- indent = 'indent = %f\\%s' % (f, m.group (2))
-
- m = re.match ('linewidth=([-.0-9]+)(cm|in|mm|pt)', o)
- if m:
- f = float (m.group (1))
- linewidth = 'linewidth = %f\\%s' % (f, m.group (2))
+ relative_quotes = ''
- if re.search ('\\\\score', body):
- is_fragment = 0
- else:
- is_fragment = 1
- if 'fragment' in opts:
- is_fragment = 1
- if 'nofragment' in opts:
- is_fragment = 0
-
- if is_fragment and not 'multiline' in opts:
- opts.append('singleline')
+ # 1 = central C
+ if relative < 0:
+ relative_quotes += ',' * (- relative)
+ elif relative > 0:
+ relative_quotes += "'" * relative
- if 'singleline' in opts:
- linewidth = 'linewidth = -1.0'
- elif not linewidth:
- l = __main__.paperguru.get_linewidth ()
- linewidth = 'linewidth = %f\pt' % l
-
- if 'noindent' in opts:
- indent = 'indent = 0.0\mm'
-
- for o in opts:
- m= re.search ('relative(.*)', o)
- v = 0
- if m:
- try:
- v = string.atoi (m.group (1))
- except ValueError:
- pass
-
- v = v + 1
- pitch = 'c'
- if v < 0:
- pitch = pitch + '\,' * v
- elif v > 0:
- pitch = pitch + '\'' * v
-
- body = '\\relative %s { %s }' %(pitch, body)
+ program_name = __main__.program_name
- if is_fragment:
- body = r'''\score {
- \notes { %s }
- \paper { }
-}''' % body
-
- opts = uniq (opts)
- optstring = string.join (opts, ' ')
- optstring = re.sub ('\n', ' ', optstring)
- body = r'''
-%% Generated automatically by: lilypond-book.py
-%% options are %s
-\include "paper%d.ly"
-\paper {
- %s
- %s
-}
-''' % (optstring, music_size, linewidth, indent) + body
-
- # ughUGH not original options
- return body
-
-def parse_options_string(s):
- d = {}
- r1 = re.compile("((\w+)={(.*?)})((,\s*)|$)")
- r2 = re.compile("((\w+)=(.*?))((,\s*)|$)")
- r3 = re.compile("(\w+?)((,\s*)|$)")
- while s:
- m = r1.match(s)
- if m:
- s = s[m.end():]
- d[m.group(2)] = re.split(",\s*", m.group(3))
- continue
- m = r2.match(s)
- if m:
- s = s[m.end():]
- d[m.group(2)] = m.group(3)
- continue
- m = r3.match(s)
- if m:
- s = s[m.end():]
- d[m.group(1)] = 1
- continue
-
- error ("format of option string invalid (was `%')" % s)
- return d
-
-def scan_html_preamble (chunks):
- return
-
-def scan_latex_preamble(chunks):
- # first we want to scan the \documentclass line
- # it should be the first non-comment line
- idx = 0
- while 1:
- if chunks[idx][0] == 'ignore':
- idx = idx + 1
- continue
- m = get_re ('header').match(chunks[idx][1])
- if m <> None and m.group (1):
- options = re.split (',[\n \t]*', m.group(1)[1:-1])
- else:
- options = []
- for o in options:
- if o == 'landscape':
- paperguru.m_landscape = 1
- m = re.match("(.*?)paper", o)
- if m:
- paperguru.m_papersize = m.group()
- else:
- m = re.match("(\d\d)pt", o)
- if m:
- paperguru.m_fontsize = int(m.group(1))
- break
+ paper_string = string.join (options_dict[PAPER], '\n ') % override
+ bookpaper_string = string.join (options_dict[BOOKPAPER], '\n ') % override
+ notes_string = string.join (options_dict[NOTES], '\n ') % vars ()
+ preamble_string = string.join (options_dict[PREAMBLE], '\n ') % override
+ return (PREAMBLE_LY + body) % vars ()
+
+
+# BARF
+# use lilypond for latex (.lytex) books,
+# and lilypond --preview for html, texinfo books?
+def to_eps (file):
+ cmd = r'latex "\nonstopmode \input %s"' % file
+ # Ugh. (La)TeX writes progress and error messages on stdout
+ # Redirect to stderr
+ cmd = '(( %s >&2 ) >&- )' % cmd
+ ly.system (cmd)
+ ly.system ('dvips -Ppdf -u+ec-mftrace.map -u+lilypond.map -E -o %s.eps %s' \
+ % (file, file))
+
+
+ # check if it really is EPS.
+ # Otherwise music glyphs disappear from 2nd and following pages.
+
+ # TODO: should run dvips -pp -E per page, then we get proper
+ # cropping as well.
- while idx < len(chunks) and chunks[idx][0] != 'preamble-end':
- if chunks[idx] == 'ignore':
- idx = idx + 1
- continue
- m = get_re ('geometry').search(chunks[idx][1])
- if m:
- paperguru.m_use_geometry = 1
- o = parse_options_string(m.group('options'))
- for k in o.keys():
- paperguru.set_geo_option(k, o[k])
- idx = idx + 1
-
-def scan_texi_preamble (chunks):
- # this is not bulletproof..., it checks the first 10 chunks
- for c in chunks[:10]:
- if c[0] == 'input':
- for s in ('afourpaper', 'afourwide', 'letterpaper',
- 'afourlatex', 'smallbook'):
- if string.find(c[1], "@%s" % s) != -1:
- paperguru.m_papersize = s
-
-
-def scan_preamble (chunks):
- if __main__.format == 'html':
- scan_html_preamble (chunks)
- elif __main__.format == 'latex':
- scan_latex_preamble (chunks)
- elif __main__.format == 'texi':
- scan_texi_preamble (chunks)
-
+ f = open ('%s.eps' % file)
+ for x in range(0,10) :
+ if re.search ("^%%Pages: ", f.readline ()):
-def completize_preamble (chunks):
- if __main__.format != 'latex':
- return chunks
- pre_b = post_b = graphics_b = None
- for chunk in chunks:
- if chunk[0] == 'preamble-end':
+ # make non EPS.
+ ly.system ('dvips -Ppdf -u+ec-mftrace.map -u+lilypond.map -o %s.eps %s' \
+ % (file, file))
break
- if chunk[0] == 'input':
- m = get_re('def-pre-re').search(chunk[1])
- if m:
- pre_b = 1
- if chunk[0] == 'input':
- m = get_re('def-post-re').search(chunk[1])
- if m:
- post_b = 1
-
- if chunk[0] == 'input':
- m = get_re('usepackage-graphics').search(chunk[1])
- if m:
- graphics_b = 1
- x = 0
- while x < len (chunks) and chunks[x][0] != 'preamble-end':
- x = x + 1
-
- if x == len(chunks):
- return chunks
- if not pre_b:
- chunks.insert(x, ('input', get_output ('output-default-pre')))
- if not post_b:
- chunks.insert(x, ('input', get_output ('output-default-post')))
- if not graphics_b:
- chunks.insert(x, ('input', get_output ('usepackage-graphics')))
-
- return chunks
-
-read_files = []
def find_file (name):
- '''
- Search the include path for NAME. If found, return the (CONTENTS, PATH) of the file.
- '''
-
- if name == '-':
- return (sys.stdin.read (), '<stdin>')
- f = None
- nm = ''
- for a in include_path:
- try:
- nm = os.path.join (a, name)
- f = open (nm)
- __main__.read_files.append (nm)
- break
- except IOError:
- pass
- if f:
- sys.stderr.write ("Reading `%s'\n" % nm)
- return (f.read (), nm)
- else:
- error ("File not found `%s'\n" % name)
- return ('', '')
+ for i in include_path:
+ full = os.path.join (i, name)
+ if os.path.exists (full):
+ return full
+ ly.error (_ ('file not found: %s') % name + '\n')
+ ly.exit (1)
+ return ''
+
+def verbatim_html (s):
+ return re.sub ('>', '>',
+ re.sub ('<', '<',
+ re.sub ('&', '&', s)))
-def do_ignore(match_object):
- return [('ignore', match_object.group('code'))]
-def do_preamble_end(match_object):
- return [('preamble-end', match_object.group('code'))]
+def verbatim_texinfo (s):
+ return re.sub ('{', '@{',
+ re.sub ('}', '@}',
+ re.sub ('@', '@@', s)))
-def make_verbatim(match_object):
- return [('verbatim', match_object.group('code'))]
+def split_options (option_string):
+ return re.split (format_res[format]['option-sep'], option_string)
-def make_verb(match_object):
- return [('verb', match_object.group('code'))]
-def do_include_file(m):
- "m: MatchObject"
- return [('input', get_output ('pagebreak'))] \
- + read_doc_file(m.group('filename')) \
- + [('input', get_output ('pagebreak'))]
+class Chunk:
+ def replacement_text (self):
+ return ''
+
+ def filter_text (self):
+ return self.replacement_text ()
-def do_input_file(m):
- return read_doc_file(m.group('filename'))
-def make_lilypond(m):
- if m.group('options'):
- options = m.group('options')
- else:
- options = ''
- return [('input', get_output('output-lilypond-fragment') %
- (options, m.group('code')))]
+ def ly_is_outdated (self):
+ return 0
+
+ def png_is_outdated (self):
+ return 0
-def make_lilypond_file(m):
- '''
+class Substring (Chunk):
+ def __init__ (self, source, start, end):
+ self.source = source
+ self.start = start
+ self.end = end
- Find @lilypondfile{bla.ly} occurences and substitute bla.ly
- into a @lilypond .. @end lilypond block.
+ def replacement_text (self):
+ return self.source [self.start:self.end]
- '''
+class Snippet (Chunk):
+ def __init__ (self, type, match, format):
+ self.type = type
+ self.match = match
+ self.hash = 0
+ self.options = []
+ self.format = format
+
+ def replacement_text (self):
+ return self.match.group (0)
- if m.group('options'):
- options = m.group('options')
- else:
- options = ''
- (content, nm) = find_file(m.group('filename'))
- options = "filename=%s," % nm + options
+ def substring (self, s):
+ return self.match.group (s)
- return [('input', get_output('output-lilypond') %
- (options, content))]
+ def __repr__ (self):
+ return `self.__class__` + " type = " + self.type
-def make_lilypond_block(m):
- if not g_do_music:
- return []
-
- if m.group('options'):
- options = get_re('option-sep').split (m.group('options'))
- else:
- options = []
- options = filter(lambda s: s != '', options)
- return [('lilypond', m.group('code'), options)]
-
-def do_columns(m):
- if __main__.format != 'latex':
- return []
- if m.group('num') == 'one':
- return [('numcols', m.group('code'), 1)]
- if m.group('num') == 'two':
- return [('numcols', m.group('code'), 2)]
+class Include_snippet (Snippet):
+ def processed_filename (self):
+ f = self.substring ('filename')
+ return os.path.splitext (f)[0] + format2ext[format]
+
+ def replacement_text (self):
+ s = self.match.group (0)
+ f = self.substring ('filename')
-def chop_chunks(chunks, re_name, func, use_match=0):
- newchunks = []
- for c in chunks:
- if c[0] == 'input':
- str = c[1]
- while str:
- m = get_re (re_name).search (str)
- if m == None:
- newchunks.append (('input', str))
- str = ''
- else:
- if use_match:
- newchunks.append (('input', str[:m.start ('match')]))
- else:
- newchunks.append (('input', str[:m.start (0)]))
- #newchunks.extend(func(m))
- # python 1.5 compatible:
- newchunks = newchunks + func(m)
- str = str [m.end(0):]
- else:
- newchunks.append(c)
- return newchunks
+ return re.sub (f, self.processed_filename (), s)
-def determine_format (str):
- if __main__.format == '':
-
- html = re.search ('(?i)<[dh]tml', str[:200])
- latex = re.search (r'''\\document''', str[:200])
- texi = re.search ('@node|@setfilename', str[:200])
+class Lilypond_snippet (Snippet):
+ def __init__ (self, type, match, format):
+ Snippet.__init__ (self, type, match, format)
+ os = match.group ('options')
+ if os:
+ self.options = split_options (os)
- f = ''
- g = None
+ def ly (self):
+ return self.substring ('code')
+
+ def full_ly (self):
+ s = self.ly ()
+ if s:
+ return compose_ly (s, self.options)
+ return ''
+
+ # todo: use md5?
+ def get_hash (self):
+ if not self.hash:
+ self.hash = abs (hash (self.full_ly ()))
+ return self.hash
+
+ def basename (self):
+ if use_hash_p:
+ return 'lily-%d' % self.get_hash ()
+ raise 'to be done'
+
+ def write_ly (self):
+ outf = open (self.basename () + '.ly', 'w')
+ outf.write (self.full_ly ())
+
+ open (self.basename() + '.txt', 'w').write("image of music")
- if html and not latex and not texi:
- f = 'html'
- elif latex and not html and not texi:
- f = 'latex'
- elif texi and not html and not latex:
- f = 'texi'
- else:
- error ("can't determine format, please specify")
- __main__.format = f
-
- if __main__.paperguru == None:
- if __main__.format == 'html':
- g = HtmlPaper ()
- elif __main__.format == 'latex':
- g = LatexPaper ()
- elif __main__.format == 'texi':
- g = TexiPaper ()
-
- __main__.paperguru = g
+ def ly_is_outdated (self):
+ base = self.basename ()
-def read_doc_file (filename):
- '''Read the input file, find verbatim chunks and do \input and \include
- '''
- (str, path) = find_file(filename)
- determine_format (str)
+ tex_file = '%s.tex' % base
+ ly_file = '%s.ly' % base
+ ok = os.path.exists (ly_file) and os.path.exists (tex_file)\
+ and os.stat (tex_file)[stat.ST_SIZE] \
+ and open (tex_file).readlines ()[-1][1:-1] \
+ == 'lilypondend'
+
+ if ok and (use_hash_p or self.ly () == open (ly_file).read ()):
+ # TODO: something smart with target formats
+ # (ps, png) and m/ctimes
+ return None
+ return self
- chunks = [('input', str)]
+ def png_is_outdated (self):
+ base = self.basename ()
+ ok = self.ly_is_outdated ()
+ if format == HTML or format == TEXINFO:
+ ok = ok and (os.path.exists (base + '.png')
+ or glob.glob (base + '-page*.png'))
+ return not ok
- # we have to check for verbatim before doing include,
- # because we don't want to include files that are mentioned
- # inside a verbatim environment
- chunks = chop_chunks(chunks, 'verbatim', make_verbatim)
- chunks = chop_chunks(chunks, 'verb', make_verb)
- chunks = chop_chunks(chunks, 'multiline-comment', do_ignore)
- #ugh fix input
- chunks = chop_chunks(chunks, 'include', do_include_file, 1)
- chunks = chop_chunks(chunks, 'input', do_input_file, 1)
- return chunks
-
-
-taken_file_names = {}
-def schedule_lilypond_block (chunk):
- '''Take the body and options from CHUNK, figure out how the
- real .ly should look, and what should be left MAIN_STR (meant
- for the main file). The .ly is written, and scheduled in
- TODO.
-
- Return: a chunk (TYPE_STR, MAIN_STR, OPTIONS, TODO, BASE)
-
- TODO has format [basename, extension, extension, ... ]
+ def filter_text (self):
+ code = self.substring ('code')
+ s = run_filter (code)
+ d = {'code' : s,
+ 'options': self.match.group ('options')
+ }
+ # TODO
+ return output[self.format][FILTER] % d
- '''
- (type, body, opts) = chunk
- assert type == 'lilypond'
- file_body = compose_full_body (body, opts)
- ## Hmm, we should hash only lilypond source, and skip the
- ## %options are ...
- ## comment line
- basename = 'lily-' + `abs(hash (file_body))`
- for o in opts:
- m = re.search ('filename="(.*?)"', o)
- if m:
- basename = m.group (1)
- if not taken_file_names.has_key(basename):
- taken_file_names[basename] = 0
- else:
- taken_file_names[basename] = taken_file_names[basename] + 1
- basename = basename + "-%i" % taken_file_names[basename]
- if not g_read_lys:
- update_file(file_body, os.path.join(g_outdir, basename) + '.ly')
- needed_filetypes = ['tex']
-
- if format == 'html' or format == 'texi':
- needed_filetypes.append ('eps')
- needed_filetypes.append ('png')
- if 'eps' in opts and not ('eps' in needed_filetypes):
- needed_filetypes.append('eps')
- pathbase = os.path.join (g_outdir, basename)
- def f (base, ext1, ext2):
- a = os.path.isfile(base + ext2)
- if (os.path.isfile(base + ext1) and
- os.path.isfile(base + ext2) and
- os.stat(base+ext1)[stat.ST_MTIME] >
- os.stat(base+ext2)[stat.ST_MTIME]) or \
- not os.path.isfile(base + ext2):
- return 1
- todo = []
- if 'tex' in needed_filetypes and f(pathbase, '.ly', '.tex'):
- todo.append('tex')
- if 'eps' in needed_filetypes and f(pathbase, '.tex', '.eps'):
- todo.append('eps')
- if 'png' in needed_filetypes and f(pathbase, '.eps', '.png'):
- todo.append('png')
- newbody = ''
-
- if 'printfilename' in opts:
- for o in opts:
- m= re.match ("filename=(.*)", o)
- if m:
- newbody = newbody + get_output ("output-filename") % m.group(1)
- break
-
+ def replacement_text (self):
+ func = Lilypond_snippet.__dict__ ['output_' + self.format]
+ return func (self)
- if 'verbatim' in opts:
- newbody = output_verbatim (body)
+ def get_images (self):
+ base = self.basename ()
+ # URGUGHUGHUGUGHU
+ single = '%(base)s.png' % vars ()
+ multiple = '%(base)s-page1.png' % vars ()
+ images = (single,)
+ if os.path.exists (multiple) \
+ and (not os.path.exists (single)\
+ or (os.stat (multiple)[stat.ST_MTIME] \
+ > os.stat (single)[stat.ST_MTIME])):
+ images = glob.glob ('%(base)s-page*.png' % vars ())
+ return images
+
+ def output_html (self):
+ str = ''
+ base = self.basename ()
+ if format == HTML:
+ str += self.output_print_filename (HTML)
+ if VERBATIM in self.options:
+ verb = verbatim_html (self.substring ('code'))
+ str += write (output[HTML][VERBATIM] % vars ())
+ if QUOTE in self.options:
+ str = output[HTML][QUOTE] % vars ()
+
+ str += output[HTML][BEFORE] % vars ()
+ for image in self.get_images ():
+ base, ext = os.path.splitext (image)
+ str += output[HTML][OUTPUT] % vars ()
+ str += output[HTML][AFTER] % vars ()
+ return str
+
+ def output_info (self):
+ str = self.output_print_filename (HTML)
+ str = output[TEXINFO][BEFORE] % vars ()
+ for image in self.get_images ():
+ base, ext = os.path.splitext (image)
+
+ # URG, makeinfo implicitely prepends dot to ext
+ # specifying no extension is most robust
+ ext = ''
+ str += output[TEXINFO][OUTPUT] % vars ()
+ str += output[TEXINFO][AFTER] % vars ()
+ return str
+
+ def output_latex (self):
+ str = ''
+ base = self.basename ()
+ if format == LATEX:
+ str += self.output_print_filename (LATEX)
+ if VERBATIM in self.options:
+ verb = self.substring ('code')
+ str += (output[LATEX][VERBATIM] % vars ())
+ if QUOTE in self.options:
+ str = output[LATEX][QUOTE] % vars ()
+
+ str += (output[LATEX][BEFORE]
+ + (output[LATEX][OUTPUT] % vars ())
+ + output[LATEX][AFTER])
+ return str
+
+ def output_print_filename (self,format):
+ str = ''
+ if PRINTFILENAME in self.options:
+ base = self.basename ()
+ filename = self.substring ('filename')
+ str = output[format][PRINTFILENAME] % vars ()
+ return str
+
+ def output_texinfo (self):
+ str = ''
+ # self.output_print_filename (TEXINFO)
+ str += ('@html\n' + self.output_print_filename (HTML)
+ + '\n@end html\n')
+ str += ('@tex\n' + self.output_print_filename (LATEX)
+ + '\n@end tex\n')
+ base = self.basename ()
+ if TEXIDOC in self.options:
+ texidoc = base + '.texidoc'
+ if os.path.exists (texidoc):
+ str += '@include %(texidoc)s\n\n' % vars ()
+
+ if VERBATIM in self.options:
+ verb = verbatim_texinfo (self.substring ('code'))
+ str += (output[TEXINFO][VERBATIM] % vars ())
+
+ str += ('@ifinfo\n' + self.output_info () + '\n@end ifinfo\n')
+ str += ('@tex\n' + self.output_latex () + '\n@end tex\n')
+ str += ('@html\n' + self.output_html () + '\n@end html\n')
+
+ if QUOTE in self.options:
+ str = output[TEXINFO][QUOTE] % vars ()
+
+ # need par after image
+ str += '\n'
+
+ return str
+
+class Lilypond_file_snippet (Lilypond_snippet):
+ def ly (self):
+ name = self.substring ('filename')
+ return '\\renameinput \"%s\"\n%s' % (name, open (find_file (name)).read ())
+
+snippet_type_to_class = {
+ 'lilypond_file' : Lilypond_file_snippet,
+ 'lilypond_block' : Lilypond_snippet,
+ 'lilypond' : Lilypond_snippet,
+ 'include' : Include_snippet,
+ }
- for o in opts:
- m = re.search ('intertext="(.*?)"', o)
- if m:
- newbody = newbody + m.group (1) + "\n\n"
-
- if 'noinline' in opts:
- s = 'output-noinline'
- elif format == 'latex':
- if 'eps' in opts:
- s = 'output-eps'
- else:
- s = 'output-tex'
- else: # format == 'html' or format == 'texi':
- s = 'output-all'
- newbody = newbody + get_output (s) % {'fn': basename }
- return ('lilypond', newbody, opts, todo, basename)
-
-def process_lilypond_blocks(chunks):#ugh rename
- newchunks = []
- # Count sections/chapters.
- for c in chunks:
- if c[0] == 'lilypond':
- c = schedule_lilypond_block (c)
- elif c[0] == 'numcols':
- paperguru.m_num_cols = c[2]
- newchunks.append (c)
- return newchunks
-
-
-
-def system (cmd):
- sys.stderr.write ("invoking `%s'\n" % cmd)
- st = os.system (cmd)
- if st:
- error ('Error command exited with value %d\n' % st)
- return st
-
-def quiet_system (cmd, name):
- if not verbose_p:
- progress ( _("Running %s...") % name)
- cmd = cmd + ' 1> /dev/null 2> /dev/null'
-
- return system (cmd)
-
-def get_bbox (filename):
- system ('gs -sDEVICE=bbox -q -sOutputFile=- -dNOPAUSE %s -c quit > %s.bbox 2>&1 ' % (filename, filename))
-
- box = open (filename + '.bbox').read()
- m = re.match ('^%%BoundingBox: ([0-9]+) ([0-9]+) ([0-9]+) ([0-9]+)', box)
- gr = []
- if m:
- gr = map (string.atoi, m.groups ())
-
- return gr
-
-def make_pixmap (name):
- bbox = get_bbox (name + '.eps')
- margin = 0
- fo = open (name + '.trans.eps' , 'w')
- fo.write ('%d %d translate\n' % (-bbox[0]+margin, -bbox[1]+margin))
- fo.close ()
-
- res = 90
+def find_toplevel_snippets (s, types):
+ res = {}
+ for i in types:
+ res[i] = ly.re.compile (snippet_res[format][i])
+
+ snippets = []
+ index = 0
+ ## found = dict (map (lambda x: (x, None), types))
+ ## urg python2.1
+ found = {}
+ map (lambda x, f=found: f.setdefault (x, None), types)
+
+ # We want to search for multiple regexes, without searching
+ # the string multiple times for one regex.
+ # Hence, we use earlier results to limit the string portion
+ # where we search.
+ # Since every part of the string is traversed at most once for
+ # every type of snippet, this is linear.
+
+ while 1:
+ first = None
+ endex = 1 << 30
+ for type in types:
+ if not found[type] or found[type][0] < index:
+ found[type] = None
+ m = res[type].search (s[index:endex])
+ if not m:
+ continue
+
+ cl = Snippet
+ if snippet_type_to_class.has_key (type):
+ cl = snippet_type_to_class[type]
+ snip = cl (type, m, format)
+ start = index + m.start (0)
+ found[type] = (start, snip)
+
+ if found[type] \
+ and (not first or found[type][0] < found[first][0]):
+ first = type
+
+ # FIXME.
+
+ # Limiting the search space is a cute
+ # idea, but this *requires* to search
+ # for possible containing blocks
+ # first, at least long as we do not
+ # search for the start of blocks, but
+ # always/directly for the entire
+ # @block ... @end block.
+
+ endex = found[first][0]
- x = (2* margin + bbox[2] - bbox[0]) * res / 72.
- y = (2* margin + bbox[3] - bbox[1]) * res / 72.
+ if not first:
+ snippets.append (Substring (s, index, len (s)))
+ break
- cmd = r'''gs -g%dx%d -sDEVICE=pnggray -dTextAlphaBits=4 -dGraphicsAlphaBits=4 -q -sOutputFile=- -r%d -dNOPAUSE %s %s -c quit > %s'''
-
- cmd = cmd % (x, y, res, name + '.trans.eps', name + '.eps',name + '.png')
- quiet_system (cmd, 'gs')
+ (start , snip) = found[first]
+ snippets.append (Substring (s, index, start))
+ snippets.append (snip)
+ found[first] = None
+ index = start + len (snip.match.group (0))
- try:
- status = system (cmd)
- except:
- os.unlink (name + '.png')
- error ("Removing output file")
-
-def compile_all_files (chunks):
- global foutn
- eps = []
- tex = []
- png = []
-
- for c in chunks:
- if c[0] <> 'lilypond':
- continue
- base = c[4]
- exts = c[3]
- for e in exts:
- if e == 'eps':
- eps.append (base)
- elif e == 'tex':
- #ugh
- if base + '.ly' not in tex:
- tex.append (base + '.ly')
- elif e == 'png' and g_do_pictures:
- png.append (base)
- d = os.getcwd()
- if g_outdir:
- os.chdir(g_outdir)
- if tex:
- # fixme: be sys-independent.
- def incl_opt (x):
- if g_outdir and x[0] <> '/' :
- x = os.path.join (g_here_dir, x)
- return ' -I %s' % x
-
- incs = map (incl_opt, include_path)
- lilyopts = string.join (incs, ' ' )
- if do_deps:
- lilyopts = lilyopts + ' --dependencies '
- if g_outdir:
- lilyopts = lilyopts + '--dep-prefix=' + g_outdir + '/'
- texfiles = string.join (tex, ' ')
- cmd = 'lilypond --header=texidoc %s %s %s' \
- % (lilyopts, g_extra_opts, texfiles)
-
- system (cmd)
-
- #
- # Ugh, fixing up dependencies for .tex generation
- #
- if do_deps:
- depfiles=map (lambda x: re.sub ('(.*)\.ly', '\\1.dep', x), tex)
- for i in depfiles:
- f =open (i)
- text=f.read ()
- f.close ()
- text=re.sub ('\n([^:\n]*):', '\n' + foutn + ':', text)
- f = open (i, 'w')
- f.write (text)
- f.close ()
-
- for e in eps:
- cmd = r"echo $TEXMF; tex '\nonstopmode \input %s'" % e
- quiet_system (cmd, 'TeX')
-
- cmd = r"dvips -E -o %s %s" % (e + '.eps', e)
- quiet_system (cmd, 'dvips')
+ return snippets
+
+def filter_pipe (input, cmd):
+ if verbose_p:
+ ly.progress (_ ("Opening filter `%s\'") % cmd)
- for g in png:
- make_pixmap (g)
+ stdin, stdout, stderr = os.popen3 (cmd)
+ stdin.write (input)
+ status = stdin.close ()
+
+ if not status:
+ status = 0
+ output = stdout.read ()
+ status = stdout.close ()
+ error = stderr.read ()
- os.chdir (d)
-
-
-def update_file (body, name):
- '''
- write the body if it has changed
- '''
- same = 0
- try:
- f = open (name)
- fs = f.read (-1)
- same = (fs == body)
- except:
- pass
-
- if not same:
- f = open (name , 'w')
- f.write (body)
- f.close ()
+ if not status:
+ status = 0
+ signal = 0x0f & status
+ if status or (not output and error):
+ exit_status = status >> 8
+ ly.error (_ ("`%s\' failed (%d)") % (cmd, exit_status))
+ ly.error (_ ("The error log is as follows:"))
+ sys.stderr.write (error)
+ sys.stderr.write (stderr.read ())
+ ly.exit (status)
- return not same
-
-
-def getopt_args (opts):
- "Construct arguments (LONG, SHORT) for getopt from list of options."
- short = ''
- long = []
- for o in opts:
- if o[1]:
- short = short + o[1]
- if o[0]:
- short = short + ':'
- if o[2]:
- l = o[2]
- if o[0]:
- l = l + '='
- long.append (l)
- return (short, long)
-
-def option_help_str (o):
- "Transform one option description (4-tuple ) into neatly formatted string"
- sh = ' '
- if o[1]:
- sh = '-%s' % o[1]
-
- sep = ' '
- if o[1] and o[2]:
- sep = ','
-
- long = ''
- if o[2]:
- long= '--%s' % o[2]
-
- arg = ''
- if o[0]:
- if o[2]:
- arg = '='
- arg = arg + o[0]
- return ' ' + sh + sep + long + arg
-
-
-def options_help_str (opts):
- "Convert a list of options into a neatly formatted string"
- w = 0
- strs =[]
- helps = []
-
- for o in opts:
- s = option_help_str (o)
- strs.append ((s, o[3]))
- if len (s) > w:
- w = len (s)
-
- str = ''
- for s in strs:
- str = str + '%s%s%s\n' % (s[0], ' ' * (w - len(s[0]) + 3), s[1])
- return str
-
-def help():
- sys.stdout.write('''Usage: lilypond-book [options] FILE\n
-Generate hybrid LaTeX input from Latex + lilypond
-Options:
-''')
- sys.stdout.write (options_help_str (option_definitions))
- sys.stdout.write (r'''Warning all output is written in the CURRENT directory
-
-
-
-Report bugs to bug-lilypond@gnu.org.
-
-Written by Tom Cato Amundsen <tca@gnu.org> and
-Han-Wen Nienhuys <hanwen@cs.uu.nl>
-''')
-
- sys.exit (0)
-
-
-def write_deps (fn, target, chunks):
- global read_files
- sys.stderr.write('Writing `%s\'\n' % os.path.join(g_outdir, fn))
- f = open (os.path.join(g_outdir, fn), 'w')
- f.write ('%s%s: ' % (g_dep_prefix, target))
- for d in read_files:
- f.write ('%s ' % d)
- basenames=[]
- for c in chunks:
- if c[0] == 'lilypond':
- (type, body, opts, todo, basename) = c;
- basenames.append (basename)
- for d in basenames:
- if g_outdir:
- d=g_outdir + '/' + d
- if g_dep_prefix:
- #if not os.isfile (d): # thinko?
- if not re.search ('/', d):
- d = g_dep_prefix + d
- f.write ('%s.tex ' % d)
- f.write ('\n')
- #if len (basenames):
- # for d in basenames:
- # f.write ('%s.ly ' % d)
- # f.write (' : %s' % target)
- f.write ('\n')
- f.close ()
- read_files = []
-
-def identify (stream):
- stream.write ('lilypond-book (GNU LilyPond) %s\n' % program_version)
-
-def print_version ():
- identify (sys.stdout)
- sys.stdout.write (r'''Copyright 1998--1999
-Distributed under terms of the GNU General Public License. It comes with
-NO WARRANTY.
-''')
-
-
-def check_texidoc (chunks):
- n = []
- for c in chunks:
- if c[0] == 'lilypond':
- (type, body, opts, todo, basename) = c;
- pathbase = os.path.join (g_outdir, basename)
- if os.path.isfile (pathbase + '.texidoc'):
- body = '\n@include %s.texidoc\n' % basename + body
- c = (type, body, opts, todo, basename)
- n.append (c)
- return n
-
-
-## what's this? Docme --hwn
-##
-def fix_epswidth (chunks):
- newchunks = []
- for c in chunks:
- if c[0] <> 'lilypond' or 'eps' not in c[2]:
- newchunks.append (c)
- continue
-
- mag = 1.0
- for o in c[2]:
- m = re.match ('magnification=([0-9.]+)', o)
- if m:
- mag = string.atof (m.group (1))
-
- def replace_eps_dim (match, lmag = mag):
- filename = match.group (1)
- dims = bounding_box_dimensions (filename)
-
- return '%fpt' % (dims[0] *lmag)
-
- body = re.sub (r'''\\lilypondepswidth{(.*?)}''', replace_eps_dim, c[1])
- newchunks.append(('lilypond', body, c[2], c[3], c[4]))
-
- return newchunks
+ if verbose_p:
+ ly.progress ('\n')
+ return output
+
+def run_filter (s):
+ return filter_pipe (s, filter_cmd)
+
+def is_derived_class (cl, baseclass):
+ if cl == baseclass:
+ return 1
+ for b in cl.__bases__:
+ if is_derived_class (b, baseclass):
+ return 1
+ return 0
-##docme: why global?
-foutn=""
-def do_file(input_filename):
- chunks = read_doc_file(input_filename)
- chunks = chop_chunks(chunks, 'lilypond', make_lilypond, 1)
- chunks = chop_chunks(chunks, 'lilypond-file', make_lilypond_file, 1)
- chunks = chop_chunks(chunks, 'lilypond-block', make_lilypond_block, 1)
- chunks = chop_chunks(chunks, 'singleline-comment', do_ignore, 1)
- chunks = chop_chunks(chunks, 'preamble-end', do_preamble_end)
- chunks = chop_chunks(chunks, 'numcols', do_columns)
- #print "-" * 50
- #for c in chunks: print "c:", c;
- #sys.exit()
- scan_preamble(chunks)
- chunks = process_lilypond_blocks(chunks)
+def process_snippets (cmd, ly_snippets, png_snippets):
+ ly_names = filter (lambda x: x, map (Lilypond_snippet.basename, ly_snippets))
+ png_names = filter (lambda x: x, map (Lilypond_snippet.basename, png_snippets))
+
+ if ly_names:
+ ly.system (string.join ([cmd] + ly_names), progress_p = 1)
+
+ if format == HTML or format == TEXINFO:
+ for i in png_names:
+ if not os.path.exists (i + '.eps') and os.path.exists (i + '.tex'):
+ to_eps (i)
+ ly.make_ps_images (i + '.eps', resolution=110)
+
+# elif os.path.exists (i + '.ps'):
+# ly.make_ps_images (i + '.ps', resolution=110)
+
+
+LATEX_DOCUMENT = r'''
+%(preamble)s
+\begin{document}
+\typeout{textwidth=\the\textwidth}
+\typeout{columnsep=\the\columnsep}
+\makeatletter\if@twocolumn\typeout{columns=2}\fi\makeatother
+\end{document}
+'''
+#need anything else besides textwidth?
+def get_latex_textwidth (source):
+ m = re.search (r'''(?P<preamble>\\begin\s*{document})''', source)
+ preamble = source[:m.start (0)]
+ latex_document = LATEX_DOCUMENT % vars ()
+ parameter_string = filter_pipe (latex_document, latex_filter_cmd)
+
+ columns = 0
+ m = re.search ('columns=([0-9.]*)', parameter_string)
+ if m:
+ columns = string.atoi (m.group (1))
- # Do It.
- if __main__.g_run_lilypond:
- compile_all_files (chunks)
- chunks = fix_epswidth (chunks)
+ columnsep = 0
+ m = re.search ('columnsep=([0-9.]*)pt', parameter_string)
+ if m:
+ columnsep = string.atof (m.group (1))
- if __main__.format == 'texi':
- chunks = check_texidoc (chunks)
+ textwidth = 0
+ m = re.search('textwidth=([0-9.]*)pt', parameter_string)
+ if m:
+ textwidth = string.atof (m.group (1))
+ if columns:
+ textwidth = (textwidth - columnsep) / columns
+
+ return textwidth
+
+ext2format = {
+ '.html' : HTML,
+ '.itely' : TEXINFO,
+ '.lytex' : LATEX,
+ '.tely' : TEXINFO,
+ '.tex': LATEX,
+ '.texi' : TEXINFO,
+ '.texinfo' : TEXINFO,
+ '.xml' : HTML,
+ }
+
+format2ext = {
+ HTML: '.html',
+ #TEXINFO: '.texinfo',
+ TEXINFO: '.texi',
+ LATEX: '.tex',
+ }
+
+def do_file (input_filename):
+ #ugh
+ global format
+ if not format:
+ e = os.path.splitext (input_filename)[1]
+ if e in ext2format.keys ():
+ #FIXME
+ format = ext2format[e]
+ else:
+ ly.error (_ ("cannot determine format for: %s" \
+ % input_filename))
- x = 0
- chunks = completize_preamble (chunks)
+ if not input_filename or input_filename == '-':
+ in_handle = sys.stdin
+ input_fullname = '<stdin>'
+ else:
+ if os.path.exists (input_filename):
+ input_fullname = input_filename
+ elif format == LATEX:
+ # urg python interface to libkpathsea?
+ input_fullname = ly.read_pipe ('kpsewhich '
+ + input_filename)[:-1]
+ else:
+ input_fullname = find_file (input_filename)
+ in_handle = open (input_fullname)
+
+ if input_filename == '-':
+ input_base = 'stdin'
+ else:
+ input_base = os.path.basename \
+ (os.path.splitext (input_filename)[0])
+ # only default to stdout when filtering
+ if output_name == '-' or (not output_name and filter_cmd):
+ output_filename = '-'
+ output_file = sys.stdout
+ else:
+ if not output_name:
+ output_filename = input_base + format2ext[format]
+ else:
+ if not os.path.isdir (output_name):
+ os.mkdir (output_name, 0777)
+ output_filename = (output_name
+ + '/' + input_base
+ + format2ext[format])
+
+
+ if (os.path.exists (input_filename) and
+ os.path.exists (output_filename) and
+ os.path.samefile (output_filename, input_fullname)):
+ ly.error (_("Output would overwrite input file; use --output."))
+ sys.exit (2)
+
+ output_file = open (output_filename, 'w')
+ if output_name:
+ os.chdir (output_name)
+
+ ly.progress (_ ("Reading %s...") % input_fullname)
+ source = in_handle.read ()
+ ly.progress ('\n')
+
+ # FIXME: containing blocks must be first, see find_toplevel_snippets
+ snippet_types = (
+ 'multiline_comment',
+ 'verbatim',
+ 'lilypond_block',
+# 'verb',
+ 'singleline_comment',
+ 'lilypond_file',
+ 'include',
+ 'lilypond', )
+ ly.progress (_ ("Dissecting..."))
+ chunks = find_toplevel_snippets (source, snippet_types)
+ ly.progress ('\n')
+
+ global default_ly_options
+ textwidth = 0
+ if not default_ly_options.has_key (LINEWIDTH):
+ if format == LATEX:
+ textwidth = get_latex_textwidth (source)
+ default_ly_options[LINEWIDTH] = '''%.0f\\pt''' \
+ % textwidth
+ elif format == TEXINFO:
+ for (k, v) in texinfo_linewidths.items ():
+ # FIXME: @paper is usually not in chunk #0:
+ # \input texinfo @c -*-texinfo-*-
+ # bluntly search first K of source
+ # s = chunks[0].replacement_text ()
+ if re.search (k, source[:1024]):
+ default_ly_options[LINEWIDTH] = v
+ break
+
+ if filter_cmd:
+ output_file.writelines ([c.filter_text () for c in chunks])
+
+
+ elif process_cmd:
+ ly_outdated = filter (lambda x: is_derived_class (x.__class__, Lilypond_snippet) \
+ and x.ly_is_outdated (), chunks)
+ png_outdated = filter (lambda x: is_derived_class (x.__class__, Lilypond_snippet) \
+ and x.png_is_outdated (), chunks)
+
+ ly.progress (_ ("Writing snippets..."))
+ map (Lilypond_snippet.write_ly, ly_outdated)
+ ly.progress ('\n')
- global foutn
+ if ly_outdated:
+ ly.progress (_ ("Processing..."))
+ process_snippets (process_cmd, ly_outdated, png_outdated)
+ else:
+ ly.progress (_ ("All snippets are up to date..."))
+ ly.progress ('\n')
+
+ ly.progress (_ ("Compiling %s...") % output_filename)
+ output_file.writelines ([s.replacement_text () \
+ for s in chunks])
+ ly.progress ('\n')
+
+ def process_include (snippet):
+ os.chdir (original_dir)
+ name = snippet.substring ('filename')
+ ly.progress (_ ('Processing include: %s') % name)
+ ly.progress ('\n')
+ do_file (name)
+
+ map (process_include,
+ filter (lambda x: is_derived_class (x.__class__, Include_snippet), chunks))
- if outname:
- my_outname = outname
- elif input_filename == '-' or input_filename == "/dev/stdin":
- my_outname = '-'
- else:
- my_outname = os.path.basename (os.path.splitext(input_filename)[0]) + '.' + format
- my_depname = my_outname + '.dep'
+def do_options ():
+ global format, output_name
+ global filter_cmd, process_cmd, verbose_p
- if my_outname == '-' or my_outname == '/dev/stdout':
- fout = sys.stdout
- foutn = "<stdout>"
- __main__.do_deps = 0
- else:
- foutn = os.path.join (g_outdir, my_outname)
- sys.stderr.write ("Writing `%s'\n" % foutn)
- fout = open (foutn, 'w')
- for c in chunks:
- fout.write (c[1])
- fout.close ()
- # should chmod -w
-
- if do_deps:
- write_deps (my_depname, foutn, chunks)
-
-
-outname = ''
-try:
- (sh, long) = getopt_args (__main__.option_definitions)
- (options, files) = getopt.getopt(sys.argv[1:], sh, long)
-except getopt.error, msg:
- sys.stderr.write("error: %s" % msg)
- sys.exit(1)
-
-do_deps = 0
-for opt in options:
- o = opt[0]
- a = opt[1]
-
- if o == '--include' or o == '-I':
- include_path.append (a)
- elif o == '--version' or o == '-v':
- print_version ()
- sys.exit (0)
- elif o == '--verbose' or o == '-V':
- __main__.verbose_p = 1
- elif o == '--format' or o == '-f':
- __main__.format = a
- elif o == '--outname' or o == '-o':
- if len(files) > 1:
- #HACK
- sys.stderr.write("Lilypond-book is confused by --outname on multiple files")
- sys.exit(1)
- outname = a
- elif o == '--help' or o == '-h':
- help ()
- elif o == '--no-lily' or o == '-n':
- __main__.g_run_lilypond = 0
- elif o == '--dependencies' or o == '-M':
- do_deps = 1
- elif o == '--default-music-fontsize':
- default_music_fontsize = string.atoi (a)
- elif o == '--default-lilypond-fontsize':
- print "--default-lilypond-fontsize is deprecated, use --default-music-fontsize"
- default_music_fontsize = string.atoi (a)
- elif o == '--extra-options':
- g_extra_opts = a
- elif o == '--force-music-fontsize':
- g_force_lilypond_fontsize = string.atoi(a)
- elif o == '--force-lilypond-fontsize':
- print "--force-lilypond-fontsize is deprecated, use --default-lilypond-fontsize"
- g_force_lilypond_fontsize = string.atoi(a)
- elif o == '--dep-prefix':
- g_dep_prefix = a
- elif o == '--no-pictures':
- g_do_pictures = 0
- elif o == '--no-music':
- g_do_music = 0
- elif o == '--read-lys':
- g_read_lys = 1
- elif o == '--outdir':
- g_outdir = a
-
-identify (sys.stderr)
-if g_outdir:
- if os.path.isfile(g_outdir):
- error ("outdir is a file: %s" % g_outdir)
- if not os.path.exists(g_outdir):
- os.mkdir(g_outdir)
-setup_environment ()
-for input_filename in files:
- do_file(input_filename)
+ (sh, long) = ly.getopt_args (option_definitions)
+ try:
+ (options, files) = getopt.getopt (sys.argv[1:], sh, long)
+ except getopt.error, s:
+ sys.stderr.write ('\n')
+ ly.error (_ ("getopt says: `%s\'" % s))
+ sys.stderr.write ('\n')
+ ly.help ()
+ ly.exit (2)
+
+ for opt in options:
+ o = opt[0]
+ a = opt[1]
+
+ if 0:
+ pass
+ elif o == '--filter' or o == '-F':
+ filter_cmd = a
+ process_cmd = 0
+ elif o == '--format' or o == '-f':
+ format = a
+ if a == 'texi-html' or a == 'texi':
+ format = TEXINFO
+ elif o == '--help' or o == '-h':
+ ly.help ()
+ sys.exit (0)
+ elif o == '--include' or o == '-I':
+ include_path.append (os.path.join (original_dir,
+ ly.abspath (a)))
+ elif o == '--output' or o == '-o':
+ output_name = a
+ elif o == '--outdir':
+ output_name = a
+ elif o == '--process' or o == '-P':
+ process_cmd = a
+ filter_cmd = 0
+ elif o == '--version' or o == '-v':
+ ly.identify (sys.stdout)
+ sys.exit (0)
+ elif o == '--verbose' or o == '-V':
+ verbose_p = 1
+ elif o == '--warranty' or o == '-w':
+ if 1 or status:
+ ly.warranty ()
+ sys.exit (0)
+ return files
+
+def main ():
+ files = do_options ()
+ global process_cmd
+ if process_cmd == '':
+ process_cmd = lilypond_binary + " -f tex "
-#
-# Petr, ik zou willen dat ik iets zinvoller deed,
-# maar wat ik kan ik doen, het verandert toch niets?
-# --hwn 20/aug/99
+ if process_cmd:
+ process_cmd += string.join ([(' -I %s' % p)
+ for p in include_path])
+
+ ly.identify (sys.stderr)
+ ly.setup_environment ()
+ if files:
+ do_file (files[0])
+
+if __name__ == '__main__':
+ main ()