included in this script's support.")
(after-line-breaking ,boolean? "Dummy property, used to trigger
callback for @code{after-line-breaking}.")
- (align-dir ,ly:dir? "Which side to align? @code{-1}: left side,
+ (align-dir ,ly:dir? "Which side to align? @w{@code{-1}}: left side,
@code{0}: around center of width, @code{1}: right side.")
(allow-loose-spacing ,boolean? "If set, column can be detached
from main spacing.")
;;
(c0-position ,integer? "An integer indicating the position of
middle@tie{}C.")
- (circled-tip ,boolean? "Put a circle at start/end of
-hairpins (al/del niente).")
+ (circled-tip ,boolean? "Put a circle at start/@/end of
+hairpins (al/@/del niente).")
(clip-edges ,boolean? "Allow outward pointing beamlets at the
edges of beams?")
(collapse-height ,ly:dimension? "Minimum height of system start
-delimiter. If equal or smaller, the bracket/brace/line is removed.")
+delimiter. If equal or smaller, the bracket/@/brace/@/line is removed.")
+ (collision-interfaces ,list? "A list of interfaces for which
+automatic beam-collision resolution is run.")
+ (collision-voice-only ,boolean? "Does automatic beam collsion apply
+only to the voice in which the beam was created?")
(color ,color? "The color of this grob.")
(common-shortest-duration ,ly:moment? "The most common shortest
note length. This is used in spacing. Enlarging this sets the score
control points for the tie, slur, or bracket shape. For B@'eziers,
this should list the control points of a third-order B@'ezier curve.")
-
;;
;; d
;;
having a @code{details} property.")
(digit-names ,vector? "Names for string finger digits.")
(direction ,ly:dir? "If @code{side-axis} is @code{0} (or
-@code{#X}), then this property determines whether the object is placed
-@code{#LEFT}, @code{#CENTER} or @code{#RIGHT} with respect to the
+@code{X}), then this property determines whether the object is placed
+@code{LEFT}, @code{CENTER} or @code{RIGHT} with respect to the
other object. Otherwise, it determines whether the object is placed
-@code{#UP}, @code{#CENTER} or @code{#DOWN}. Numerical values may also
-be used: @code{#UP}=@code{1}, @code{#DOWN}=@code{-1},
-@code{#LEFT}=@code{-1}, @code{#RIGHT}=@code{1},
-@code{#CENTER}=@code{0}.")
+@code{UP}, @code{CENTER} or @code{DOWN}. Numerical values may also
+be used: @code{UP}=@code{1}, @code{DOWN}=@w{@code{-1}},
+@code{LEFT}=@w{@code{-1}}, @code{RIGHT}=@code{1},
+@code{CENTER}=@code{0}.")
(dot-count ,integer? "The number of dots.")
(dot-negative-kern ,number? "The space to remove between a dot
and a slash in percent repeat glyphs. Larger values bring the two
the vertical edges: @code{(@var{left-height} . @var{right-height})}.")
(edge-text ,pair? "A pair specifying the texts to be set at the
edges: @code{(@var{left-text} . @var{right-text})}.")
+ (round-up-exceptions ,list? "A list of pairs where car is the numerator
+and cdr the denominator of a moment. Each pair in this list means that
+the multi-measure rests of the corresponding length will be rounded up to
+the longer rest. See @var{round-up-to-longer-rest}.")
(expand-limit ,integer? "Maximum number of measures expanded in
church rests.")
;; remove me?
include @code{upright}, @code{italic}, @code{caps}.")
(font-size ,number? "The font size, compared to the
@q{normal}@tie{}size. @code{0}@tie{}is style-sheet's normal size,
-@code{-1} is smaller, @code{+1} is bigger. Each step of@tie{}1 is
+@w{@code{-1}} is smaller, @code{+1} is bigger. Each step of@tie{}1 is
approximately 12% larger; 6@tie{}steps are exactly a factor@tie{}2
larger. Fractional values are allowed.")
(footnote-text ,markup? "A footnote for the grob.")
@item
@code{fret-count} -- The number of frets. Default@tie{}4.
@item
+@code{fret-label-custom-format} -- The format string to be used label
+the lowest fret number, when @code{number-type} equals to
+@code{custom}. Default@tie{}\"~a\".
+@item
@code{fret-label-font-mag} -- The magnification of the font used to
label the lowest fret number. Default@tie{}0.5.
@item
Default@tie{}0.
@item
@code{label-dir} -- Side to which the fret label is attached.
-@code{-1}, @code{#LEFT}, or @code{#DOWN} for left or down; @code{1},
-@code{#RIGHT}, or @code{#UP} for right or up. Default @code{#RIGHT}.
+@w{@code{-1}}, @code{LEFT}, or @code{DOWN} for left or down; @code{1},
+@code{RIGHT}, or @code{UP} for right or up. Default @code{RIGHT}.
@item
@code{mute-string} -- Character string to be used to indicate muted
string. Default @code{\"x\"}.
@item
@code{number-type} -- Type of numbers to use in fret label. Choices
-include @code{roman-lower}, @code{roman-upper}, and @code{arabic}.
+include @code{roman-lower}, @code{roman-upper}, @code{arabic} and
+@code{custom}. In the later case, the format string is supplied by
+the @code{fret-label-custom-format} property.
Default @code{roman-lower}.
@item
@code{open-string} -- Character string to be used to indicate open
@itemize @bullet
@item
-@code{box-offset} -- Vertical shift of the center of flat/sharp pedal
-boxes above/below the horizontal line. Default value@tie{}0.8.
+@code{box-offset} -- Vertical shift of the center of flat/@/sharp pedal
+boxes above/@/below the horizontal line. Default value@tie{}0.8.
@item
@code{box-width} -- Width of each pedal box. Default value@tie{}0.4.
@item
between the two, and @code{staff-affinity} is either @code{UP} or
@code{DOWN}. See @code{staff-staff-spacing} for a description of
the alist structure.")
+ (normalized-endpoints ,pair? "Represents left and right placement
+over the total spanner, where the width of the spanner is normalized
+between 0 and 1.")
(note-names ,vector? "Vector of strings containing names for
easy-notation note heads.")
(right-padding ,ly:dimension? "Space to insert on the right side
of an object (e.g., between note and its accidentals).")
(rotation ,list? "Number of degrees to rotate this object, and
-what point to rotate around. For example, @code{#'(45 0 0)} rotates
+what point to rotate around. For example, @code{'(45 0 0)} rotates
by 45 degrees around the center of this object.")
+ (round-up-to-longer-rest ,boolean? "Displays the longer multi-measure
+rest when the length of a measure is between two values of
+@code{usable-duration-logs}. For example, displays a breve instead of a whole
+in a 3/2 measure.")
;;
(script-priority ,number? "A sorting key that determines in what
order a script is within a stack of scripts.")
(self-alignment-X ,number? "Specify alignment of an object. The
-value @code{-1} means left aligned, @code{0}@tie{}centered, and
+value @w{@code{-1}} means left aligned, @code{0}@tie{}centered, and
@code{1}@tie{}right-aligned in X@tie{}direction. Other numerical
values may also be specified.")
(self-alignment-Y ,number? "Like @code{self-alignment-X} but for
shortest note playing here.")
(shortest-starter-duration ,ly:moment? "The duration of the
shortest note that starts here.")
- (side-axis ,number? "If the value is @code{#X} (or
+ (side-axis ,number? "If the value is @code{X} (or
equivalently@tie{}@code{0}), the object is placed horizontally next to
-the other object. If the value is @code{#Y} or@tie{}@code{1}, it is
+the other object. If the value is @code{Y} or@tie{}@code{1}, it is
placed vertically.")
(side-relative-direction ,ly:dir? "Multiply direction of
@code{direction-source} with this to get the direction of this
object.")
+ (simple-Y ,boolean? "Should the Y placement of a spanner
+disregard changes in system heights?")
(size ,number? "Size of object, relative to standard size.")
(skyline-horizontal-padding ,number? "For determining the
vertical distance between two staves, it is possible to have a
override:
@example
-\\override MultiMeasureRest #'spacing-pair = #'(staff-bar . staff-bar)
+\\override MultiMeasureRest
+ #'spacing-pair = #'(staff-bar . staff-bar)
@end example")
+ (spanner-id ,string? "An identifier to distinguish concurrent spanners.")
(springs-and-rods ,boolean? "Dummy variable for triggering
spacing routines.")
(stacking-dir ,ly:dir? "Stack objects in which direction?")
structure.")
(stem-attachment ,number-pair? "An @code{(@var{x} . @var{y})}
pair where the stem attaches to the notehead.")
+ (stem-begin-position ,number? "Where does the stem begin (the
+position of the support-head)?")
(stem-end-position ,number? "Where does the stem end (the end is
opposite to the support-head)?")
;;[TODO: doco]
@var{dir})} pairs, indicating the desired tie configuration, where
@var{position} is the offset from the center of the staff in staff
space and @var{dir} indicates the direction of the tie
-(@code{1}=>up, @code{-1}=>down, @code{0}=>center). A non-pair entry
+(@code{1}=>up, @w{@code{-1}}=>down, @code{0}=>center). A non-pair entry
in the list causes the corresponding tie to be formatted
automatically.")
(to-barline ,boolean? "If true, the spanner will stop at the bar
polyphonic patterns.")
(used ,boolean? "If set, this spacing column is kept in the
spacing problem.")
+ (usable-duration-logs ,list? "List of @code{duration-log}s that
+can be used in typesetting the grob.")
;;
(bars ,ly:grob-array? "An array of bar line pointers.")
(beam ,ly:grob? "A pointer to the beam, if applicable.")
+ (bound-alignment-interfaces ,list "Interfaces to be used
+for positioning elements that align with a column.")
(bounded-by-me ,ly:grob-array? "An array of spanners that have this
-column as start/begin point. Only columns that have grobs or act as
+column as start/@/begin point. Only columns that have grobs or act as
bounds are spaced.")
(bracket ,ly:grob? "The bracket for a number.")
(figures ,ly:grob-array? "Figured bass objects for continuation line.")
+ (glissando-index ,integer? "The index of a glissando in its note
+column.")
(grace-spacing ,ly:grob? "A run of grace notes.")
(heads ,ly:grob-array? "An array of note heads.")
(spacing-wishes ,ly:grob-array? "An array of note spacing or staff spacing
objects.")
(span-start ,boolean? "Is the note head at the start of a spanner?")
- (spanner-placement ,number? "The place of an annotation on a spanner.
-Note that this number must be between -1 and 1, with -1 representing the
-beginning of the spanner and 1 representing the end. The annotation will
-still be placed at the left or right extremity of the spanner, but this
-number ensures that when line breaking happens, the annotation is assigned
-to the correct broken piece and the footnote is put on the correct page.
-An important caveat is that this number applies to column ranks, not staff
-space. For example, 0 will place the annotation at the middle column of
-its parent's span, which may be to the right or left of the physical middle
-of the spanner.")
+ (spanner-broken ,boolean? "Indicates whether spanner
+alignment should be broken after the current spanner.")
+ (spanner-placement ,ly:dir? "The place of an annotation on a spanner.
+@code{LEFT} is for the first spanner, and @code{RIGHT} is for the last.
+@code{CENTER} will place it on the broken spanner that falls closest to the
+center of the length of the entire spanner, although this behavior is
+unpredictable in situations with lots of rhythmic diversity. For predictable
+results, use @code{LEFT} and @code{RIGHT}.")
(staff-grouper ,ly:grob? "The staff grouper we belong to.")
(staff-symbol ,ly:grob? "The staff symbol grob that we are in.")
(stem ,ly:grob? "A pointer to a @code{Stem} object.")
(system-Y-offset ,number? "The Y-offset (relative to the bottom of the
top-margin of the page) of the system to which this staff belongs.")
- (use-breve-rest ,boolean? "Use breve rests for measures longer
-than a whole rest.")
;;;;;;;;;;;;;;;;
;; ancient notation
(cavum ,boolean? "Is this neume outlined?")
(context-info ,integer? "Within a ligature, the final glyph or shape of
-a head may be affected by the left and/or right neighbour head.
+a head may be affected by the left and/@/or right neighbour head.
@code{context-info} holds for each head such information about the left and
right neighbour, encoded as a bit mask.")