-% -*-Fundamental-*-
+% -%-Fundamental-%- -*-Metafont-*-
% parmesan-heads.mf -- implement ancient note heads
%
% source file of LilyPond's pretty-but-neat music font
%
-% (c) 2001--2003 Juergen Reuter <reuter@ipd.uka.de>
+% (c) 2001--2005 Juergen Reuter <reuter@ipd.uka.de>
%
% Neo-mensural heads originally by
% Christian Mondrup and Mats Bengtsson
fet_begingroup ("noteheads")
-noteheight#:=staff_space# + (1 + overdone_heads)*stafflinethickness#;
+%
+% character aligment:
+%
+% The head is assumed to be vertically centered around (0, 0).
+% The left-most edge of the head should touch the vertical line
+% that goes though the point (0, 0).
+%
+% set_char_box() conventions:
+%
+% * breapth: Ignored (as far as I know). Should be set to 0.
+%
+% * width: Should match the head's width.
+%
+% * depth: Should match the bottom edge of the head. Affects vertical
+% collision handling.
+%
+% * height: Should match the top edge of the head. Affects vertical
+% collision handling.
+%
+% TODO: should depth/height include appendages/stems?
+
+overdone_heads = 0;
+noteheight# := staff_space# + (1 + overdone_heads)*stafflinethickness#;
define_pixels(noteheight);
%
%
%
-brevis_wid# := 2 staff_space#;
-def draw_neo_brevis(expr brevwid) =
+def draw_neomensural_brevis(expr brevwid) =
save beamheight, head_width;
save holeheight, stem_width;
save serif_size, serif_protrude;
-- z4l -- z4r -- z3r{left} .. z2r{up} -- cycle;
addto currentpicture also currentpicture yscaled -1;
- show z4r; show z4l;
addto currentpicture also currentpicture
shifted (-x4r,0) xscaled -1 shifted (x4l,0);
enddef;
-def draw_neo_left_stemmed_head (expr wid) =
- draw_neo_brevis(wid);
+def draw_neomensural_left_stemmed_head (expr wid) =
+ draw_neomensural_brevis(wid);
- x6 = x7 = head_width - stem_width/2;
+ x6 = x7 = stem_width/2;
y6 = y5;
- y7 = y5 - 2.25staff_space;
+ y7 = y5 - 2.25 staff_space;
pickup pencircle scaled stem_width;
draw z6 .. z7;
enddef;
-fet_beginchar("Left stemmed notehead", "lneo_mensural", "mensuralleftstemmedhead");
- draw_neo_left_stemmed_head (brevis_wid#)
+fet_beginchar("Left stemmed notehead", "lneomensural");
+ draw_neomensural_left_stemmed_head (2 staff_space#);
fet_endchar;
%
% Some sources (eg Musix/OpusTeX think that the appendage should be on
% the left, some say right. Right wins democratically.
%
-def draw_neo_longa (expr wid) =
- draw_neo_brevis(wid);
+def draw_neomensural_longa (expr wid) =
+ draw_neomensural_brevis(wid);
save theta;
x7r = head_width;
%
% (ze is wel breed)
%
-fet_beginchar("Maxima notehead", "-3neo_mensural", "mensuralmaximahead");
- draw_neo_longa (1.3 brevis_wid#)
+fet_beginchar("Neo-mensural maxima notehead", "s-3neomensural");
+ draw_neomensural_longa (2.6 staff_space#)
fet_endchar;
-fet_beginchar("Longa notehead", "-2neo_mensural", "mensurallongahead");
- draw_neo_longa (brevis_wid#)
+fet_beginchar("Neo-mensural longa notehead", "s-2neomensural");
+ draw_neomensural_longa (2 staff_space#)
fet_endchar;
-fet_beginchar("Brevis notehead", "-1neo_mensural", "mensuralbrevishead")
- draw_neo_brevis(brevis_wid#);
+fet_beginchar("Neo-mensural brevis notehead", "s-1neomensural")
+ draw_neomensural_brevis(2 staff_space#);
fet_endchar;
-def draw_neo_mensural_black_head (expr wid) =
+def draw_neomensural_black_head (expr wid, height) =
save head_width;
head_width# = wid;
- set_char_box (0, head_width#, noteheight#/2, noteheight#/2);
-
+ set_char_box (0, head_width#, height/2, height/2);
+
+ charwx := head_width# / 2;
+ charwy := height / 2;
y3 = y1 =0;
x2 = x4 = (x1 + x3) /2;
filldraw z1 -- z2 -- z3 -- z4 -- cycle;
enddef;
-def draw_neo_mensural_open_head (expr wid)=
- draw_neo_mensural_black_head (wid);
+def draw_neomensural_open_head (expr wid, height)=
+ draw_neomensural_black_head (wid, height);
save diamNW, diamSW;
diamNW = length (z2 - z1) + blot_diameter;
diamSW = length (z4 - z1) + blot_diameter;
save hole_widthNW, hole_widthSW;
hole_widthNW = 0.34 diamNW ;
- hole_widthSW + 2.6 stafflinethickness = diamSW;
+ hole_widthSW + 2.6 linethickness = diamSW;
(z7 + z5)/2 = (w/2, 0);
(z8 + z6)/2 = (w/2, 0);
unfill z5 -- z6 -- z7 -- z8 --cycle;
enddef;
-fet_beginchar("Neo-mensural open head","0neo_mensural","neomensuralsemibrevishead")
- draw_neo_mensural_open_head (staff_space#);
+fet_beginchar("Neo-mensural open head","s0neomensural")
+ draw_neomensural_open_head (staff_space#, noteheight#);
+fet_endchar;
+
+%
+% WL says the thin lines should be thinner.
+%
+
+fet_beginchar("Harmonic notehead (Neo-mensural open)",
+ "0harmonic")
+
+ draw_neomensural_open_head (1.3 staff_space#, 1.3 noteheight#);
+ charwx := head_width#;
+ charwy := 0;
fet_endchar;
-fet_beginchar("Neo-mensural open head","1neo_mensural","neomensuralminimahead")
- draw_neo_mensural_open_head (staff_space#);
+
+fet_beginchar("Neo-mensural open head","s1neomensural")
+ draw_neomensural_open_head (staff_space#, noteheight#);
fet_endchar;
-fet_beginchar("Neo-mensural black head","2neo_mensural","neomensuralsemiminimahead")
- draw_neo_mensural_black_head (staff_space#);
+fet_beginchar("Neo-mensural black head","s2neomensural")
+ draw_neomensural_black_head (staff_space#, noteheight#);
fet_endchar;
-brevis_wid# := 1 staff_space#;
-def draw_brevis (expr wid) =
- % TODO. For the moment, fall back to draw_neo_brevis.
- draw_neo_brevis(wid);
+def draw_mensural_brevis (expr wid) =
+ % TODO. For the moment, fall back to draw_neomensural_brevis.
+ draw_neomensural_brevis(wid);
enddef;
-def draw_left_stemmed_head (expr wid) =
- draw_brevis(wid);
- save theta;
-
+def draw_mensural_left_stemmed_head (expr wid) =
+ draw_mensural_brevis(wid);
x6 = x7 = stem_width/2;
y6 = y5;
y7 = y5 - 2.25staff_space;
draw z6 .. z7;
enddef;
-fet_beginchar("Left stemmed notehead", "lmensural", "mensuralleftstemmedhead");
- draw_left_stemmed_head (brevis_wid#)
-fet_endchar;
-
-def draw_longa (expr wid) =
- draw_brevis(wid);
-
+def draw_mensural_longa (expr wid) =
+ draw_mensural_brevis(wid);
x6 = x7 = head_width - stem_width/2;
y6 = y5;
y7 = y5 - 2.25staff_space;
draw z6 .. z7;
enddef;
-fet_beginchar("Maxima notehead", "-3mensural", "mensuralmaximahead");
- draw_longa (2.0 brevis_wid#)
+fet_beginchar("Mensural left stemmed notehead", "slmensural");
+ draw_mensural_left_stemmed_head (staff_space#)
fet_endchar;
-fet_beginchar("Longa notehead", "-2mensural", "mensurallongahead");
- draw_longa (brevis_wid#)
+fet_beginchar("Mensural maxima notehead", "s-3mensural");
+ draw_mensural_longa (2.0 staff_space#)
fet_endchar;
-fet_beginchar("Brevis notehead", "-1mensural", "mensuralbrevishead")
- draw_brevis(brevis_wid#);
+fet_beginchar("Mensural longa notehead", "s-2mensural");
+ draw_mensural_longa (staff_space#)
+fet_endchar;
+
+fet_beginchar("Mensural brevis notehead", "s-1mensural")
+ draw_mensural_brevis(staff_space#);
fet_endchar;
def draw_diamond_head (expr head_h, pen_w, pen_h, angle, open) =
save head_width, head_height;
head_height# = head_h;
head_width# / head_height# = tand(angle);
- define_pixels(head_width, head_height);
set_char_box (0, head_width#,
- head_height#/2, head_height#/2);
+ head_height#/2, head_height#/2);
+
+ charwx := head_width# / 2;
+ charwy := head_height# / 2 - linethickness#;
+ define_pixels(head_width, head_height);
pickup pencircle
- xscaled (min(blot_diameter, pen_w * head_width))
- yscaled (min(blot_diameter, pen_h * head_width))
+ xscaled (max(blot_diameter, pen_w * head_width))
+ yscaled (max(blot_diameter, pen_h * head_width))
rotated -angle;
%% FIXME: replace "xpart (top z2)" (and, analogously,
enddef;
-fet_beginchar("Mensural open head","0mensural","mensuralsemibrevishead")
+fet_beginchar("Mensural open head","s0mensural")
draw_diamond_head (staff_space#, 0.15, 0.30, 30, true);
fet_endchar;
-fet_beginchar("Mensural open head","1mensural","mensuralminimahead")
+fet_beginchar("Mensural open head","s1mensural")
draw_diamond_head (staff_space#, 0.15, 0.30, 30, true);
fet_endchar;
-fet_beginchar("Mensural black head","2mensural","mensuralsemiminimahead")
+fet_beginchar("Mensural black head","s2mensural")
draw_diamond_head (staff_space#, 0.15, 0.30, 30, false);
fet_endchar;
%
% parameterized punctum
-def punctum_char (expr verbose_name, internal_name, ly_name,
+def punctum_char (expr verbose_name, internal_name,
left_stem, right_stem, linea, cavum,
straight, auctum, direction_up, excentric, up_shift, down_shift, mag) =
- fet_beginchar(verbose_name, internal_name, ly_name)
+ fet_beginchar(verbose_name, "s" & internal_name)
save b_h, a_w;
a_b := 1.54; % b_h*a_b/a_w = wd/ht
b_h := 0.85;
fi
define_pixels(convexity, excentricity, yoffs, ht, wd);
- pickup pencircle scaled stafflinethickness;
+ pickup pencircle scaled linethickness;
path p;
save height, yoffs_bt;
save box_top, box_bt;
if auctum:
- z1a = (0.00wd + stafflinethickness/2, yoffs_bt);
+ z1a = (0.00wd + linethickness/2, yoffs_bt);
z2a = (0.21wd, yoffs_bt + 1.0*convexity);
- z3a = (0.42wd - stafflinethickness/2,
+ z3a = (0.42wd - linethickness/2,
yoffs_bt + 1.0*excentricity);
box_top# = height# + yoffs_bt# +
max(0, 1.0*convexity#, 1.0*excentricity#);
p = z1a .. {right}z2a .. {direction}z3a --
z3b{-direction} .. z2b{left} .. z1b -- cycle;
elseif excentric:
- z1a = (0.00wd + stafflinethickness/2,
+ z1a = (0.00wd + linethickness/2,
yoffs_bt - 1.0*convexity);
z2a = (0.08wd, yoffs_bt + 1.4*convexity);
- z3a = (0.42wd - stafflinethickness/2,
+ z3a = (0.42wd - linethickness/2,
yoffs_bt - 1.0*convexity);
box_top# = height# + yoffs_bt# +
max(-1.0*convexity#, 1.4*convexity#, 0);
p = z1a{direction} .. z2a{right} .. z3a --
z3b .. {left}z2b .. {-direction}z1b -- cycle;
else:
- z1a = (0.00wd + stafflinethickness/2, yoffs_bt);
+ z1a = (0.00wd + linethickness/2, yoffs_bt);
z2a = (0.21wd, yoffs_bt + 1.0*convexity);
- z3a = (0.42wd - stafflinethickness/2, yoffs_bt);
+ z3a = (0.42wd - linethickness/2, yoffs_bt);
box_top# = height# + yoffs_bt# +
max(0, 1.0*convexity#);
box_bt# = yoffs_bt# +
filldraw p;
fi;
- pickup pencircle scaled 0.6stafflinethickness;
+ pickup pencircle scaled 0.6linethickness;
save stem_bt;
if left_stem:
- z5=(0.00wd + 0.6stafflinethickness/2, yoffs);
- z6=(0.00wd + 0.6stafflinethickness/2, yoffs - 1.1ht);
+ z5=(0.00wd + 0.6linethickness/2, yoffs);
+ z6=(0.00wd + 0.6linethickness/2, yoffs - 1.1ht);
draw z5 -- z6;
stem_bt# = yoffs# - 1.1ht#;
elseif right_stem:
- z5=(0.42wd - 0.6stafflinethickness/2, yoffs);
- z6=(0.42wd - 0.6stafflinethickness/2, yoffs - 1.5ht);
+ z5=(0.42wd - 0.6linethickness/2, yoffs);
+ z6=(0.42wd - 0.6linethickness/2, yoffs - 1.5ht);
draw z5 -- z6;
stem_bt# = yoffs# - 1.5ht#;
else:
fi;
set_char_box(0.00wd#, 0.42wd#,
- max(0, -box_bt#, -stem_bt#) + stafflinethickness#/2,
- max(0, box_top#) + stafflinethickness#/2);
+ max(0, -box_bt#, -stem_bt#) + linethickness#/2,
+ max(0, box_top#) + linethickness#/2);
if linea:
save linea_width, linea_height;
- linea_width# = 0.6 stafflinethickness#;
+ linea_width# = 0.6 linethickness#;
linea_height# = 0.7 ht#;
define_pixels (linea_width, linea_height);
draw_block ((-0.10wd - linea_width/2,
enddef;
% parameterized punctum inclinatum
-def inclinatum_char(expr verbose_name, internal_name, ly_name,
+def inclinatum_char(expr verbose_name, internal_name,
small, stropha, auctum) =
- fet_beginchar(verbose_name, internal_name, ly_name)
+ fet_beginchar(verbose_name, "s"&internal_name)
save ht, alpha;
alpha# = 35;
if small:
fi;
if auctum:
- pickup pencircle scaled stafflinethickness;
+ pickup pencircle scaled linethickness;
save za, zb, zc;
pair za, zb, zc;
- za = (0, -0.5 head_height + stafflinethickness);
+ za = (0, -0.5 head_height + linethickness);
zb = 0.6 (za + zc);
zc = za + (0.52 head_width, 0);
draw za{(0,-1) rotated alpha#} .. {right}zb{right} ..
enddef;
% punctum
-punctum_char("Ed. Vat. punctum", "vaticana_punctum", "vatpunctumhead",
+punctum_char("Ed. Vat. punctum", "vaticana.punctum",
false, false, false, false, false,
false, false, false, false, false, 1.0);
% punctum cavum (for OpusTeX compatibility)
-punctum_char("Ed. Vat. punctum cavum", "vaticana_punctum_cavum",
- "vatpunctumcavumhead",
+punctum_char("Ed. Vat. punctum cavum", "vaticana.punctum.cavum",
false, false, false, true, false,
false, false, false, false, false, 1.0);
% linea punctum (for OpusTeX compatibility)
-punctum_char("Ed. Vat. linea punctum", "vaticana_linea_punctum",
- "vatlineapunctumhead",
+punctum_char("Ed. Vat. linea punctum", "vaticana.linea.punctum",
false, false, true, false, false,
false, false, false, false, false, 1.0);
% linea punctum cavum (for OpusTeX compatibility)
-punctum_char("Ed. Vat. linea punctum cavum", "vaticana_linea_punctum_cavum",
- "vatlineapunctumcavumhead",
+punctum_char("Ed. Vat. linea punctum cavum", "vaticana.linea.punctum.cavum",
false, false, true, true, false,
false, false, false, false, false, 1.0);
% punctum inclinatum
-inclinatum_char("Ed. Vat. inclinatum", "vaticana_inclinatum",
- "vatinclinatumhead",
+inclinatum_char("Ed. Vat. inclinatum", "vaticana.inclinatum",
false, false, false);
% pes lower punctum
-punctum_char("Ed. Vat. pes lower punctum", "vaticana_lpes", "vatlpeshead",
+punctum_char("Ed. Vat. pes lower punctum", "vaticana.lpes",
false, false, false, false, true,
false, true, false, false, false, 1.0);
% pes lower punctum
-punctum_char("Ed. Vat. pes var lower punctum", "vaticana_vlpes", "vatvlpeshead",
+punctum_char("Ed. Vat. pes var lower punctum", "vaticana.vlpes",
false, false, false, false, true,
false, true, false, false, true, 1.0);
% pes upper punctum
-punctum_char("Ed. Vat. pes upper punctum", "vaticana_upes", "vatupeshead",
+punctum_char("Ed. Vat. pes upper punctum", "vaticana.upes",
false, false, false, false, true,
false, false, false, false, false, 1.0);
% avoid collision with the lower punctum note of the pes when the upper
% punctum sits directly on top of the lower punctum.
%
-punctum_char("Ed. Vat. var pes upper punctum", "vaticana_vupes",
- "vatvupeshead",
+punctum_char("Ed. Vat. var pes upper punctum", "vaticana.vupes",
false, false, false, false, true,
false, false, false, true, false, 1.0);
% small punctum as used in epiphonus
-punctum_char("Ed. Vat. plica", "vaticana_plica", "vatplicahead",
+punctum_char("Ed. Vat. plica", "vaticana.plica",
false, false, false, false, false,
false, false, false, false, false, 0.6);
% excentric punctum as used in epiphonus
-punctum_char("Ed. Vat. epiphonus", "vaticana_epiphonus", "vatepiphonushead",
+punctum_char("Ed. Vat. epiphonus", "vaticana.epiphonus",
false, false, false, false, false,
false, true, true, false, false, 1.0);
% avoid collision with the plica head when the plica sits directly on
% top of the lower head.
%
-punctum_char("Ed. Vat. var epiphonus", "vaticana_vepiphonus", "vatvepiphonushead",
+punctum_char("Ed. Vat. var epiphonus", "vaticana.vepiphonus",
false, false, false, false, false,
false, true, true, false, true, 1.0);
% small punctum as used in cephalicus
-punctum_char("Ed. Vat. rev. plica", "vaticana_reverse_plica", "vatrplicahead",
+punctum_char("Ed. Vat. rev. plica", "vaticana.reverse.plica",
false, false, false, false, false,
false, true, false, false, false, 0.6);
% excentric punctum as used in cephalicus; without left stem
-punctum_char("Ed. Vat. cephalicus", "vaticana_inner_cephalicus",
- "vatinnercephalicushead",
+punctum_char("Ed. Vat. cephalicus", "vaticana.inner.cephalicus",
false, false, false, false, false,
false, false, true, false, false, 1.0);
% excentric punctum as used in cephalicus; with left stem
-punctum_char("Ed. Vat. cephalicus", "vaticana_cephalicus",
- "vatcephalicushead",
+punctum_char("Ed. Vat. cephalicus", "vaticana.cephalicus",
true, false, false, false, false,
false, false, true, false, false, 1.0);
% quilisma
-fet_beginchar("Ed. Vat. quilisma", "vaticana_quilisma", "vatquilismahead")
+fet_beginchar("Ed. Vat. quilisma", "svaticana.quilisma")
save b_h,a_w;
a_b:=1.54; % b_h*a_b/a_w = wd/ht
b_h:=0.85;
black_notehead_width# := wd#;
define_pixels(ht, wd);
- pickup pencircle xscaled stafflinethickness yscaled 0.44ht;
+ pickup pencircle xscaled linethickness yscaled 0.44ht;
lft x1 = 0.00wd; bot y1 = -0.28ht;
x2 = 0.11wd; y2 = -0.14ht;
x3 = 0.12wd; y3 = +0.03ht;
fet_endchar;
% solesmes punctum inclinatum parvum
-inclinatum_char("Solesmes punctum inclinatum parvum", "solesmes_incl_parvum",
- "solinclparvumhead",
+inclinatum_char("Solesmes punctum inclinatum parvum", "solesmes.incl.parvum",
true, false, false);
% solesmes punctum auctum ascendens
-punctum_char("Solesmes punctum auctum ascendens", "solesmes_auct_asc",
- "solauctaschead",
+punctum_char("Solesmes punctum auctum ascendens", "solesmes.auct.asc",
false, false, false, false, false,
true, true, false, false, false, 1.0);
% solesmes punctum auctum descendens
-punctum_char("Solesmes punctum auctum descendens", "solesmes_auct_desc",
- "solauctdeschead",
+punctum_char("Solesmes punctum auctum descendens", "solesmes.auct.desc",
false, false, false, false, false,
true, false, false, false, false, 1.0);
% solesmes punctum inclinatum auctum
-inclinatum_char("Solesmes punctum incl. auctum", "solesmes_incl_auctum",
- "solpunctuminclinatumauctumhead",
+inclinatum_char("Solesmes punctum incl. auctum", "solesmes.incl.auctum",
false, false, true);
% solesmes stropha
-inclinatum_char("Solesmes stropha", "solesmes_stropha",
- "solstrophahead",
+inclinatum_char("Solesmes stropha", "solesmes.stropha",
false, true, false);
% solesmes stropha aucta
-inclinatum_char("Solesmes stropha aucta", "solesmes_stropha_aucta",
- "solstrophaauctahead",
+inclinatum_char("Solesmes stropha aucta", "solesmes.stropha.aucta",
false, true, true);
% solesmes oriscus
-fet_beginchar("Solesmes oriscus", "solesmes_oriscus",
- "soloriscushead")
+fet_beginchar("Solesmes oriscus", "ssolesmes.oriscus")
save b_h, a_w;
a_b := 1.54; % b_h*a_b/a_w = wd/ht
b_h := 0.85;
%
% inclinatum
-fet_beginchar("Ed. Med. inclinatum", "medicaea_inclinatum",
- "medinclinatumhead")
+fet_beginchar("Ed. Med. inclinatum", "smedicaea.inclinatum")
draw_diamond_head (1.2staff_space#, 0, 0, 35, false);
fet_endchar;
% parametrized punctum
-def punctum_char (expr verbose_name, internal_name, ly_name,
+def punctum_char (expr verbose_name, internal_name,
left_up_stem, left_down_stem) =
- fet_beginchar(verbose_name, internal_name, ly_name)
+ fet_beginchar(verbose_name, "s"&internal_name)
save a, beta, ht, wd;
ht# = 2 staff_space#;
draw z1 .. z2;
pickup pencircle
- xscaled stafflinethickness
+ xscaled linethickness
yscaled blot_diameter;
if left_down_stem:
- z4=(0.00wd + stafflinethickness/2, blot_diameter/2);
- z5=(0.00wd + stafflinethickness/2, - 1.25ht);
+ z4=(0.00wd + linethickness/2, blot_diameter/2);
+ z5=(0.00wd + linethickness/2, - 1.25ht);
draw z4 .. z5;
set_char_box(0.0, 0.4wd#, 1.25ht#, 0.25ht#);
elseif left_up_stem:
- z4=(0.00wd + stafflinethickness/2, blot_diameter/2);
- z5=(0.00wd + stafflinethickness/2, + 1.25ht);
+ z4=(0.00wd + linethickness/2, blot_diameter/2);
+ z5=(0.00wd + linethickness/2, + 1.25ht);
draw z4 .. z5;
set_char_box(0.0, 0.4wd#, 0.25ht#, 1.25ht#);
else:
enddef;
% punctum
-punctum_char("Ed. Med. punctum", "medicaea_punctum", "medpunctumhead",
+punctum_char("Ed. Med. punctum", "medicaea.punctum",
false, false);
% left up-stemmed punctum
-punctum_char("Ed. Med. reverse virga", "medicaea_rvirga", "medrvirgahead",
+punctum_char("Ed. Med. reverse virga", "medicaea.rvirga",
true, false);
% virga (i.e. left down-stemmed punctum)
-punctum_char("Ed. Med. virga", "medicaea_virga", "medvirgahead",
+punctum_char("Ed. Med. virga", "medicaea.virga",
false, true);
%%%%%%%%
% punctum
% parametrized punctum
-def punctum_char (expr verbose_name, internal_name, ly_name,
+def punctum_char (expr verbose_name, internal_name,
down_stem) =
- fet_beginchar(verbose_name, internal_name, ly_name)
+ fet_beginchar(verbose_name, "s" & internal_name)
save alpha;
alpha# = 55;
draw_diamond_head (staff_space#, 0, 0, alpha#, false);
enddef;
% punctum
-punctum_char("Hufnagel punctum", "hufnagel_punctum", "hufpunctumhead", false)
+punctum_char("Hufnagel punctum", "hufnagel.punctum", false)
% virga
-punctum_char("Hufnagel virga", "hufnagel_virga", "hufvirgahead", true)
+punctum_char("Hufnagel virga", "hufnagel.virga", true)
% pes lower punctum
-fet_beginchar("Hufnagel pes lower punctum", "hufnagel_lpes", "huflpeshead")
+fet_beginchar("Hufnagel pes lower punctum", "shufnagel.lpes")
save width, height, alpha;
width# = 2*staff_space#;
height# = 0.7*staff_space#;
set_char_box(0, width#, height#/2, height#/2);
- pickup pencircle scaled stafflinethickness;
+ pickup pencircle scaled linethickness;
define_pixels(width, height);
rt x3 = -lft x1 = width/2;
projects / lilypond.git / blobdiff