%
% source file of the Feta (not the Font-En-Tja) music font
%
-% (c) 1997, 1998 Han-Wen Nienhuys <hanwen@stack.nl>,
-% Jan Nieuwenhuizen <janneke@gnu.org>
+% (c) 1997--2003 Han-Wen Nienhuys <hanwen@cs.uu.nl>,
+% Jan Nieuwenhuizen <janneke@gnu.org>,
+% Juergen Reuter <reuter@ipd.uka.de>
fet_begingroup("clefs");
%
-% [Ross] says that clefs take 1 interline space on the left and right
+% [Ross] says that clefs take 1 staff_space space on the left and right
%
+% this is now handled in the lilypond spacing engine.
+%
+
def set_horizontal_spacing =
save left_space ,right_space;
- left_space# = reduced_il#;
- right_space# = reduced_il#;
+ left_space# = 0;
+ right_space# = 0;
enddef;
% [Wanske] says the bulbs should be positioned about 1/4 right of the
% "arrow"
+
+%
+% TODO: the hair-curve at z6r looks a little awkward.
def draw_c_clef (expr reduction) =
- save hair, norm, reduced_il, right_edge;
- reduced_il#=interline#*reduction;
- norm#:=2/3reduced_il#;
+ save hair, norm, reduced_ss, right_edge;
+ reduced_ss#=staff_space#*reduction;
+ norm#:=2/3reduced_ss#;
hair#:=1/6norm#;
set_horizontal_spacing;
right_edge# = 15/4norm#+2hair#;
set_char_box (left_space#, right_edge# + right_space#,
- 2 reduced_il#, 2 reduced_il#);
- define_pixels (hair,norm,reduced_il, right_edge);
+ 2 reduced_ss#, 2 reduced_ss#);
+ define_pixels (hair,norm,reduced_ss, right_edge);
draw_block ((0,-d), (3/4norm+1/2hair,h));
draw_block ((3/4norm+2hair,-d),
z3=(((right_edge -xoff)/2)+xoff,2hair);
penpos4(hair,0);
- z4=(xoff+1/2norm+1/2hair,reduced_il-hair);
+ z4=(xoff+1/2norm+1/2hair,reduced_ss-hair);
penpos5(4hair,0);
z5=(xoff+5/4hair,0);
penpos6(norm-hair,90);
z6=(xoff+3/4norm,0);
- penpos7(hair,-90);
- z7r=(x1,-d);
save t; t=0.833;
save p; path p;
p = z5l..z4l{up}..z4r{down}..z3r{right}..tension t..z2r{up}
- ..tension t..z1r{left}..z1l{right}..tension t..z2l{down}
+ ..tension t..
+ flare_path(z1l,180,90,hair,norm-1/2hair, -1)
+ ..tension t..z2l{down}
..z3l{left}..z6r..z5r{down};
pickup pencircle scaled 1pt#;
filldraw p..(reverse p yscaled -1)..cycle;
penlabels (1,2,3,4,5,6);
% ugh, should be bulb, not flare?
- draw_flare(z1l,180,90,hair,norm-1/2hair);
- draw_flare(z7r,180,-90,hair,norm-1/2hair);
+
enddef;
-fet_beginchar ("C clef", "alto", "altoclef")
+fet_beginchar ("C clef", "C", "altoclef")
if test = 1:
- draw_staff (-2,2);
+ draw_staff (-2,2, 0.0);
fi;
draw_c_clef (1.0);
fet_endchar;
-fet_beginchar ("C clef", "alto_change", "caltoclef")
+fet_beginchar ("C clef", "C_change", "caltoclef")
if test = 1:
- draw_staff (-2,2);
+ draw_staff (-2,2, 0.0);
fi;
draw_c_clef (.8);
fet_endchar;
%
-% Inspired by Baerenreiter and Breitkopf
-%
-% FIXME: dims
-% FIXME: right vertical tangent seems to be lower than the F-line
-% FIXME: bulb curve smoothly into "long curve" on the inside
+% New bulb routine:
+%
+% Insert a brushed piece of the path, and draw a bulb separately
+%
+% The bulb is circular form. Neat merging of the bulb and brushed path
+% is done by playing with tension.
%
%
-% [Wanske] says that the extreme x point should be exactly between
-% the dots, but her picture shows that the extreme is ~ 0.2 ss lower
-def draw_bass_klef(expr exact_center, reduction) =
- save reduced_il, left_tilt, left_thick, ball_to_right;
- reduced_il# = interline# * reduction;
-
- set_horizontal_spacing;
- ball_to_right# = 2.1 reduced_il#;
- set_char_box(left_space# +
- - xpart exact_center,
- right_space# +
- xpart exact_center + ball_to_right#,
- - ypart exact_center + 2.5 reduced_il#,
- ypart exact_center +reduced_il#);
+def new_bulb (expr outer_tangent_point,
+ big_radius, bulb_radius, flare, direction, turning_dir) =
+
+begingroup;
+ save p, oldpen;
+ path p;
+ pen oldpen;
+ save center;
+ pair center;
+ clearxy;
+
+ center = outer_tangent_point +big_radius* dir(0) + big_radius* dir(-turning_dir * 90)
+ - bulb_radius * dir (- turning_dir * 90);
+
+ z1 = center + bulb_radius * dir (turning_dir * 180);
+ z2 = center + bulb_radius * dir (turning_dir * 270);
+
+ z9 = center + bulb_radius * dir (0);
+ z10 = center + bulb_radius * dir (turning_dir *90);
+ z3 = outer_tangent_point + flare * dir (0);
+
+ labels(1,2,3,9,10);
+
+ % tension is needed to open up the space between return path and the
+ % ball.
+ fill
+% draw
+ z9 .. z10 .. tension 1.1 .. z1 .. z2 .. cycle;
+
+ p:= outer_tangent_point{dir (-turning_dir* 90)}
+ .. tension 0.97
+ .. {dir (turning_dir * 90)}z9 -- z3
+ ;
+ if direction = 1:
+ p
+ else:
+ reverse p
+ fi
+ endgroup
+enddef;
- define_pixels(reduced_il, ball_to_right);
- left_tilt = 5;
- left_thick = .25 reduced_il;
- x1r - x1l = left_thick;
- z1l = (hround_pixels(xpart exact_center),
- vround_pixels(ypart exact_center));
- y2 = reduced_il;
+%
+%
+% There is some variation is shape of bass clefs. Important points
+%
+% * the size of the swoosh tip: in some clefs, it almost reaches the
+% bottom staff line, in some it crosses the 2nd line from the bottom
+% with a small overshoot.
+%
+% The most popular design is where the X part of the tip is aligned
+% left bulb boundary, and the Y part ends on the 2nd staffline exactly.
+% This is what we do.
+%
+% * The size of the bulb. The diameter of the bulb is the width of the
+% open space.
+%
+% * The y-alignment of the bulb. The center of the bulb can be on or slightly
+% above the staff line.
+%
+% * The position of the dots. They can be symmetrical around the
+% staffline, centered in the staff space. The Baerenreiter SCS has the
+% bottom dot raised by approx. 0.1 ss.
+%
+% * uncarefully set music may have overshoots at the top. We have none.
+%
+% * It is not exactly clear where the vertical tangent at the right
+% of the swoosh should be.
+%
+%
+
+def draw_bass_clef(expr exact_center, reduction) =
+ save reduced_ss, left_tilt, left_thick, swoosh_width;
+ save right_thickness, tip_protude;
+ pair tip_protude;
+ save dot_diam;
+ reduced_ss# = staff_space# * reduction;
+
+
+ 2.2 dot_diam = round reduction* (staff_space - stafflinethickness);
+ right_thickness = 0.48;
+ left_thick = .25;
+ swoosh_width# = 2.1 reduced_ss#;
+% tip_protude := (-stafflinethickness, -.2 staff_space);
+ tip_protude := (0, 0);
+ set_horizontal_spacing;
+ bulb_y_offset := 0.15 staff_space;
+ overshoot_top := 0.0;
+ %%
+
+ set_char_box(left_space# +
+ - xpart exact_center,
+ right_space# +
+ xpart exact_center + swoosh_width# + 7/12 reduced_ss#,
+ - ypart exact_center + 2.5 reduced_ss#,
+ ypart exact_center +reduced_ss#);
+
+ define_pixels(swoosh_width);
+ define_whole_pixels(reduced_ss);
+ left_tilt = 5;
+
+ y1 = bulb_y_offset;
+ x1 = 0;
+
+ x2 = .5 [x1,x3];
+ x2l = x2r = x2;
+
+ y2l := vround_pixels (reduced_ss# + 0.5 stafflinethickness#);
+ y2l - y2r = (1.0 + overshoot_top) * stafflinethickness;
+ y2 = .5 [y2l, y2r];
+
+ x3l - x1 = swoosh_width;
+ x3l - x3r = right_thickness * reduced_ss;
+
+ % try to correct: the top dot seems farther away if y3l = 0.
+ y3l = 0.05 staff_space;
+
+ z4 = - (0, 2.0 reduced_ss) + tip_protude;
- x3l - x1l = ball_to_right;
- x2 = .5 [x1,x3];
- x3l - x3r = .48 reduced_il;
- y3l = -0.05 interline;
- x4 = x1l - stafflinethickness;
- y4 = -2.2 reduced_il;
- z5 = (x3l + 1/3 reduced_il, .5 reduced_il);
+ z5 = (x3l + 1/3 reduced_ss, .5 reduced_ss);
- penpos1(whatever, left_tilt);
- penpos2(1.2 stafflinethickness, -90);
- penpos3(whatever, 185);
- penpos4(stafflinethickness, 135);
+ penpos3(whatever, 185);
+ penpos4(stafflinethickness, 135);
- draw_bulb(1, z1r, z1l, .45 reduced_il, 1.0);
+ pickup pencircle scaled 1;
+% draw
+ fill
+ new_bulb (z1, 0.45 reduced_ss, 0.4 reduced_ss, 2.5 stafflinethickness, 1, 1)
+{dir (90)}
+ .. z2r{right} .. tension 1.0 .. z3r{down} .. {curl 0}
+ simple_serif(z4r, z4l, 90) {curl 0}
+ .. z3l{up} .. tension 0.9 .. z2l{left}
+ .. cycle
+ ;
+ labels(2,4);
+ labels(range 1 thru 12);
- fill z1r{up} .. z2r{right} .. tension 1.0 .. z3r{down} .. {curl 0}
- simple_serif(z4r, z4l, 90) {curl 0}
- .. z3l{up} .. tension 0.9 .. z2l{left}
- .. z1l{dir (-90 + left_tilt)} -- cycle;
- labels(2,4);
- penlabels(1,2,3,4);
+ penlabels(2,3,4);
- save dot_diam;
- 2 dot_diam = reduction* (interline - stafflinethickness);
- pickup pencircle scaled dot_diam;
- draw z5;
- draw z5 yscaled -1;
+ pickup pencircle scaled dot_diam;
+ drawdot z5;
+ drawdot z5 yscaled -1;
enddef;
-fet_beginchar("F clef ", "bass", "bassclef")
+
+fet_beginchar("F clef ", "F", "bassclef")
if test = 1:
- draw_staff(-3,1);
+ draw_staff(-3,1, 0.0);
fi;
- draw_bass_klef((.5 interline#, 0), 1.0);
+ draw_bass_clef((0, 0), 1.0);
fet_endchar;
-fet_beginchar("F clef (reduced)", "bass_change", "cbassclef")
- draw_bass_klef((.4 interline#, 0),0.8);
+
+fet_beginchar("F clef (reduced)", "F_change", "cbassclef")
+ draw_bass_clef((0, 0),0.8);
fet_endchar;
%
% Inspired by Baerenreiter
%
-% FIXME bulb should curve (see bass clef)
-% FIXME start (inside) should be little thinner
-% FIXME parametrise.
-%
% Beste lezers, kijk,
%
% Ikzelf heb bijvoorbeeld over mijn eerste gave G-sleutel
% 35 kilobyte metafont, 12 patchlevels, 0 vriendinnen en 45 dagen gedaan
%
+% -- vrij naar Van Kooten & De Bie
+%
+def debugfill = fill enddef;
def draw_gclef (expr exact_center, reduction)=
- save reduced_il, downstroke_dir, downstroke_angle, hair, center;
+ save reduced_ss, downstroke_dir, downstroke_angle, center;
save breapth_factor, inner_thick_end, thinness, thickness, thinnib;
- save inner_start_angle, thinness, thinpen;
- reduced_il# = interline# * reduction;
- define_pixels(reduced_il);
+ save inner_start_angle, thinness;
+ reduced_ss# = staff_space# * reduction;
+ define_pixels(reduced_ss);
pair downstroke_dir, center;
center := (hround_pixels(xpart exact_center),
vround_pixels(ypart exact_center));
- hair = .3 stafflinethickness;
- thinness = 1.3 stafflinethickness;
- downstroke_dir = (14, -75);
- breapth_factor = 11/7;
+ thinness = 1.4 stafflinethickness;
+ downstroke_dir = unitvector (14, -75);
+ downstroke_angle = angle downstroke_dir;
+
+
+ breapth_factor = 21.0 /14;
inner_thick_end = 45;
inner_start_angle = downstroke_angle - 43;
- thickness = .4 reduced_il - hair;
+ thickness = .4 reduced_ss;
+
+ thinnib = thinness;
- thinnib = thinness - hair;
- thinpen = thinness;
set_horizontal_spacing;
set_char_box(
left_space# +
- -xpart exact_center + 1.0 * breapth_factor* reduced_il#,
+ -xpart exact_center + 1.0 * breapth_factor* reduced_ss#,
right_space# +
- xpart exact_center + .66 breapth_factor* reduced_il#,
- -ypart exact_center + 3 * reduced_il#,
- ypart exact_center + 5 * reduced_il#);
-
- pickup pencircle scaled hair;
- downstroke_angle = angle downstroke_dir;
+ xpart exact_center + .66 breapth_factor* reduced_ss#,
+ -ypart exact_center + 2.6 * reduced_ss#,
+ ypart exact_center + 5 * reduced_ss#);
+
+ save upward_swoosh_angle;
+ upward_swoosh_angle =130 ;
+ penpos7(thickness, upward_swoosh_angle);
+ penpos5(thickness, upward_swoosh_angle);
+
+
z1 = center + whatever * dir (inner_start_angle);
- x1 = xpart center -.28 reduced_il;
+ x1 = xpart center -.28 reduced_ss;
- top z2r = center + (0,reduced_il + stafflinethickness/2);
+ top z2r = center + (0,reduced_ss + stafflinethickness/2);
- x4 = xpart center - .1 reduced_il;
- bot y4r = -(reduced_il + .5 stafflinethickness);
+ x4 = xpart center - .1 reduced_ss;
+ bot y4r = -(reduced_ss + .5 stafflinethickness);
z3 = (z4 - center) rotated inner_thick_end + center;
-
- z5r = (- breapth_factor, .37)* reduced_il + center;
- penpos5(thickness, 135);
+ x5r = - breapth_factor* reduced_ss + xpart center;
+ y5r = .37 reduced_ss + ypart center;
z6 = center + whatever * downstroke_dir;
- y6 = ypart center + 2 reduced_il;
+ y6 = ypart center + 2 reduced_ss;
- z7l - z6 = whatever *(z5- z6) ;
- y7l = 3.5 reduced_il;
- z8r = .4 [z9r, z7r] + 1.5 stafflinethickness * dir 52;
+ z7l - z6 = whatever * (z5 - z6) ;
+ y7l = 3.5 reduced_ss;
x9 = .7 [x10, x7r];
- top y9l = 5 reduced_il;
+ top y9l = 5 reduced_ss;
- y10 = 3. reduced_il;
- y11 = -11/7 reduced_il;
+ y11 = ypart center - 47/28 reduced_ss;
+ y12 = ypart center - 71/28 reduced_ss;
+ y13 = .48 [y12,y4r];
+ x11 - x13r = 1.5 reduced_ss + 0.5 thinnib;
+ x12r = xpart (.45 [z13r , z11] + .75 reduced_ss * downstroke_dir) ;
- y12 = ypart center - 18.5/7 reduced_il;
- x12 = x11 - 5 /7 reduced_il;
+% z10= center + whatever * dir (downstroke_angle - 1.5 );
+ x10 = x6 - 2 thinnib;
+ y10 = ypart center + 3.5 reduced_ss;
+ y10l - y10r = 1.2 thickness;
+ z10r - z10l =
+ .7 thinnib* dir (downstroke_angle + 90) + whatever * downstroke_dir;
- z13 = z12 + .6 reduced_il*(-1,1);
+ z10 = .5 [z10l, z10r];
- (z10r - z10l) dotprod (unitvector downstroke_dir rotated 90) =
- thinnib;
+ z11 = center + whatever * downstroke_dir + ( .05 reduced_ss, 0);
- center - z10= whatever * downstroke_dir;
- center - z11 = whatever * downstroke_dir;
- center - z14 = .8 (center - z11);
penpos1(thinnib, inner_start_angle);
penpos2(thickness, 90);
penpos3(thinnib, -90 + inner_thick_end);
penpos4(thinnib, -90);
- penpos7(thickness, 135);
- penpos8(1.5 thinnib, - 70 + angle downstroke_dir);
- penpos9(1.4 thickness, -80); % ugh
- penpos10(whatever, downstroke_angle + 10);
- penpos11(thinnib, downstroke_angle + 90);
- penpos14(thinnib, downstroke_angle + 90);
- penpos12(thinnib, -90);
- penpos13(3 thinnib, 180);
+ penpos9(1.45 thickness, -70);
+ save lipje;
+ pair lipje;
+ lipje= .5 [z9l, z9r] + .25 ((z9r- z9l) rotated -90);
+ penpos13(2 thinnib, 180);
- filldraw z2l{right} .. z3l.. z4l{left} .. z5l{up} .. z7l{up}
+ pickup pencircle scaled 1;
+
+ debugfill
+ z2l{right}
+ .. z3l
+ .. z4l{left}
+ .. z5l{up}
+ .. z7l{up}
%.. z8l
.. tension 1.2
- .. z9l & z9l ..
- {downstroke_dir}z10l --- z11l -- z11r --- z10r{- downstroke_dir}
- .. tension .8
- .. z9r & z9r{dir (downstroke_angle+ 40)} % ugh
+ .. z9l -- lipje
+ --z9r % {dir (downstroke_angle+ 0)}
+ .. tension 0.8
%.. z8r
.. z7r{down} .. z5r{down} .. z4r{right}
.. z3r .. z2r{left} ..
tension .95 ..
- z1r -- z1l
+ z1r -- simple_serif(z1r, z1l, 80) -- z1l
.. tension 0.85 ..cycle;
- filldraw simple_serif(z1r, z1l, 90) -- cycle;
+ save p, staffline_time, staff_line_path, down_staff_line_intersection;
+ path p, staff_line_path;
+ pair down_staff_line_intersection;
+ p := z4{left} .. z5{up} .. z7{up} ;
+
+ staff_line_path := (-reduced_ss, 2 reduced_ss) .. (2 reduced_ss,2 reduced_ss);
- filldraw z12r{left} .. z13r{up} -- z13l{down} .. z12l{right} .. cycle;
+ draw p;
- draw_bulb(-1, z13l, lft z13r, 6/14 reduced_il, 1.0);
- pickup pencircle scaled (thinpen);
- draw z10 --- z14 .. z11 .. tension 0.85 .. z12{left};
+ % we don't do this with a path: variations in thickness
+ % are very easily made and look very ugh.
+ pickup pencircle scaled thinnib;
+
+
+ save bot_angle;
+
+ bot_angle = -180; % downstroke_angle- 87;
+
+ penpos12(thinnib, bot_angle + 90);
+
+ p := z9 .. z10{down}
+ .. z6
+ .. (.52 [z4, z3])
+ .. z11{down}
+ .. z12{dir(bot_angle)}
+ .. z13{up}
+ ;
+ save down_intersection_t;
+ down_intersection_t := xpart (p intersectiontimes staff_line_path) ;
+ down_staff_line_intersection = point down_intersection_t of p;
+ z14 = down_staff_line_intersection;
+ penpos14(thinnib, angle (direction down_intersection_t of p) + 90);
+
+ save start_angle;
+ start_angle=angle (direction xpart (p intersectiontimes z11) of p);
+ penpos11 (thinnib, start_angle+ 90);
+
+ save loop_end_dir;
+ pair loop_end_dir;
+ loop_end_dir = direction (xpart (p intersectiontimes staff_line_path)) of p;
+ draw p;
+
+ penpos6(thinnib, angle (loop_end_dir) + 90);
+ pickup pencircle scaled 1;
+ debugfill
+ z9l
+ .. {down}z10l
+ .. z14l{loop_end_dir} -- z14r{-loop_end_dir}
+ .. z10r{up}
+ .. tension .98
+ .. z9r
+ -- cycle;
+
+ pickup pencircle scaled 1;
+
+ debugfill
+ z11r{dir(start_angle)}
+ .. z12r{dir(bot_angle)}
+
+ ..new_bulb (z13r, 0.45 reduced_ss, 0.38 reduced_ss, 3 stafflinethickness, 1, -1) {down}
- penlabels(range 1 thru 15);
+% .. tension 0.98
+ .. z12l{-dir (bot_angle)}
+
+ .. z11l{-dir(start_angle)}
+ .. cycle;
+
+
+
+ penlabels(range 1 thru 16);
enddef;
-fet_beginchar("G clef", "treble", "trebleclef")
+fet_beginchar("G clef", "G", "trebleclef")
if test = 1:
- draw_staff(-1,3);
+ draw_staff(-1,3, 0.0);
fi;
- draw_gclef((1.7 interline#,0), 1.0);
+ draw_gclef((1.7 staff_space#,0), 1.0);
+fet_endchar;
+fet_beginchar("G clef", "G_change", "ctrebleclef")
+ draw_gclef((1.3 staff_space#,0), .8);
+fet_endchar;
+
+%%%%
+% PERCUSSION
+%
+%
+
+
+def draw_percussion_clef(expr reduction) =
+ save reduced_ss;
+ reduced_ss# = staff_space# * reduction;
+ define_pixels(reduced_ss);
+ set_char_box(-.67reduced_ss#,2.0reduced_ss#,reduced_ss#,reduced_ss#);
+ razt := 0.45reduced_ss;
+ draw_block((-b,-d),(-b+razt,h));
+ draw_block((w-razt,-d),(w,h));
+enddef;
+
+fet_beginchar("percussion clef", "percussion", "percussionclef")
+ draw_percussion_clef(1.0);
fet_endchar;
-fet_beginchar("G clef", "treble_change", "ctrebleclef")
- draw_gclef((1.3 interline#,0), .8);
+
+fet_beginchar("percussion clef (reduced)", "percussion_change", "cpercussionclef")
+ draw_percussion_clef(.8);
+fet_endchar;
+
+def draw_tab_T(expr pos, siz, slant) =
+ begingroup;
+ clearxy;
+ pair vx,vy;
+ vx=(xpart siz) * dir 0;
+ vy=(ypart siz) * dir 90;
+
+ penpos1(.75penh, 100);
+ z1=z2+(1/6*vx-.15*vy);
+ penpos2(.9penw, 0);
+ z2l = pos+.75vy;
+ penpos3(penh,-100);
+ z3l = pos+.4vx+vy;
+ penpos4(penh,-90);
+ z4=-.1vy+.5[z3,z5];
+ penpos5(.8penh,-30);
+ x5r=xpart (pos+siz);
+ y5l=ypart (pos+siz);
+
+ penpos10(penw,170);
+ z10=pos+.55vx+.85vy;
+ penpos11(.75[penh,penw],170);
+ z11=z10-.5vy+.025vx;
+ penpos12(penh,100);
+ z12l=(xpart .5[z13,z11],ypart (pos-.025*siz));
+ penpos13(.75penh,60);
+ z13=pos +.2vx+.15vy;
+
+ % penlabels (1,2,3,4,5,10,11,12,13);
+
+ soft_penstroke (z1e..tension 1.1
+ ..z2e
+ ..z3e{right}..tension 1.5
+ ..z4e
+ ..z5e
+ ) slanted slant shifted (slant*-ypart pos,0);
+
+ soft_penstroke (z10e..tension 1.5
+ ..z11e
+ ..z12e..tension 1.1
+ ..z13e{(z13r-z13l) rotated 90}
+ ) slanted slant shifted (slant*-ypart pos,0);
+ endgroup;
+enddef;
+
+def draw_tab_A(expr pos, siz, slant) =
+ begingroup;
+ clearxy;
+ pair vx,vy;
+ vx=(xpart siz) * dir 0;
+ vy=(ypart siz) * dir 90;
+
+ penpos1(.75penh,-110);
+ z1r=pos+.07vy;
+ penpos2(penh,-75);
+ z2r=(.5[x1,x3],ypart pos);
+ penpos3(.25[penh,penw],-30);
+ z3=(.45[x2,x4],.15[y2,y4]);
+ penpos4(1[penh,penw],0);
+ z4=pos+.5vx+.975vy;
+
+ penpos5(1[penh,penw],-180);
+ z5=z4;
+ penpos6(.2[penh,penw],-150);
+ z6l=(.8[x5l,x7l],.9[y5l,y7l]);
+ penpos7(penh,-90);
+ z7r=(.5[x6,x8],ypart pos);
+ penpos8(.75penh,-70);
+ z8r=(xpart(pos+siz),y7r+.075ypart(siz));
+
+ penpos10(penh,-105);
+ z10=.2[z3,z4];
+ penpos11(.9penh,-90);
+ z11=.4[z10,z6]-0.05vy;
+ penpos12(.75penh,-75);
+ z12=.3[z11,z6]+0.02vy;
+
+ % penlabels(1,2,3,4,5,6,7,8,10,11,12);
+
+ soft_penstroke (z1e {(z1r-z1l) rotated 90}
+ ..z2e
+ ..z3e
+ ..z4e
+ ) slanted slant shifted (slant*-ypart pos,0);
+
+ soft_penstroke (z5e
+ ..z6e
+ ..z7e
+ ..z8e {(z8r-z8l) rotated 90}
+ ) slanted slant shifted (slant*-ypart pos,0);
+
+ soft_penstroke (z10e
+ ..z11e
+ ..z12e
+ ) slanted slant shifted (slant*-ypart pos,0);
+
+ endgroup;
+enddef;
+
+def draw_tab_B(expr pos, siz, slant) =
+ begingroup;
+ clearxy;
+ pair vx,vy;
+ vx=(xpart siz) * dir 0;
+ vy=(ypart siz) * dir 90;
+
+ penpos1(.75penh, 100);
+ z1=z2+(.15*vx-.1*vy);
+ penpos2(.9penw, 0);
+ z2l = pos+.75vy;
+ penpos3(penh,-100);
+ z3l = pos+.4vx+1.05vy;
+ penpos4(.8[penh,penw],-180);
+ z4=(xpart(pos+.75siz),.5[y3,y5]);
+ penpos5(.8penh,90);
+ z5=(.5[x10,x4],ypart (pos+.55siz));
+
+ penpos6(.8penh,270);
+ z6=z5;
+ penpos7(penw,180);
+ z7l=(xpart(pos+siz),.5[y6,y8]);
+ penpos8(.8penh,45);
+ z8=.5[z12l,z11l]+.15vx-.05vy;
+
+ penpos10(.75[penh,penw],170);
+ z10=pos+.375vx+.95vy;
+ penpos11(.8[penh,penw],150);
+ z11=z10-.5vy+.04vx;
+ penpos12(penh,100);
+ z12l=(xpart .5[z13,z11],ypart pos);
+ penpos13(.75penh,60);
+ z13=pos+.1vx+.15vy;
+
+ % penlabels (1,2,3,4,5,6,7,8,10,11,12,13);
+
+ soft_penstroke (z1e..tension 1.1
+ ..z2e
+ ..z3e
+ ..z4e
+ ..z5e{left}
+ ) slanted slant shifted (slant*-ypart pos,0);
+
+ soft_penstroke (z6e{right}
+ ..z7e
+ ..z8e{(z8r-z8l) rotated 90}
+ ) slanted slant shifted (slant*-ypart pos,0);
+
+ soft_penstroke (z10e.. tension 1.5
+ ..z11e
+ ..z12e..tension 1.1
+ ..z13e{(z13r-z13l) rotated 90}
+ ) slanted slant shifted (slant*-ypart pos,0);
+ endgroup;
+enddef;
+
+def draw_tab_clef(expr reduction) =
+ save reduced_ss,vx,vy,letterheight,penw,penh;
+ reduced_ss# = staff_space# * reduction;
+ letterheight# = 1.8*reduced_ss#;
+ define_pixels(reduced_ss,letterheight);
+ set_char_box(-.2*reduced_ss#,2.8*reduced_ss#,1.6*letterheight#,1.6*letterheight#);
+
+ %draw_staff (-3,2, 0.5);
+
+ penw = .45reduced_ss;
+ penh = .2reduced_ss;
+
+ draw_tab_T((-b+.15reduced_ss,h-letterheight),
+ (2.1*reduced_ss,letterheight),0.2);
+ draw_tab_A((-b-.05reduced_ss,-.5letterheight +.15reduced_ss),
+ (2.2*reduced_ss,letterheight),0.4);
+ draw_tab_B((-b+.025reduced_ss,-d),
+ (2.1*reduced_ss,letterheight),0.25);
+enddef;
+
+fet_beginchar("tab clef", "tab", "tabclef")
+ draw_tab_clef(1.0);
+fet_endchar;
+
+fet_beginchar("tab clef (reduced)", "tab_change", "ctabclef")
+ draw_tab_clef(.8);
fet_endchar;
fet_endgroup("clefs");
projects / lilypond.git / blobdiff