% Feta (not the Font-En-Tja) music font -- Accidentals
% This file is part of LilyPond, the GNU music typesetter.
%
-% Copyright (C) 1997--2009 Han-Wen Nienhuys <hanwen@xs4all.nl>
+% Copyright (C) 1997--2014 Han-Wen Nienhuys <hanwen@xs4all.nl>
%
-%
-% LilyPond is free software: you can redistribute it and/or modify
+% The LilyPond font is free software: you can redistribute it and/or modify
% it under the terms of the GNU General Public License as published by
% the Free Software Foundation, either version 3 of the License, or
-% (at your option) any later version.
+% (at your option) any later version, or you can redistribute it under
+% the SIL Open Font License.
%
% LilyPond is distributed in the hope that it will be useful,
% but WITHOUT ANY WARRANTY; without even the implied warranty of
% along with LilyPond. If not, see <http://www.gnu.org/licenses/>.
-%
-% also show in other configuration wrt staff lines.
-%
-def draw_shifted_too =
-if test > 0:
- fet_beginchar ("shifted too", "");
- set_char_box (0, 0, 0, 0);
- currentpicture := remember_pic;
-
- draw_staff (-2, 2, 0.5);
- fet_endchar;
-fi;
-enddef;
-
-
%
% Accidentals from various sources, notably
%
fet_begingroup ("accidentals");
-
-%
-% Draw an arrow
-%
-% * `stemslant' gives the direction of the stem's left boundary
-% (needed for brushed stems, equals "up" for straight stems)
-% * `extend' is used to make the stem longer or shorter (if negative);
-% different kinds of accidentals need different values here
-%
-def draw_arrow (expr attach, stemwidth, stemslant, extend, pointingdown) =
-begingroup;
- save htip; % tip height
- save wwing; % wing `radius'
- save angle_wing_bot, angle_wing_top, angle_tip;
- save upshift;
- clearxy;
-
- wwing := 0.26 stemwidth;
- htip := staff_space * 0.85 + stafflinethickness - wwing;
-
- % `flip' is used to reflect the arrow vertically
- % if arrow points downward
- transform flip;
- if pointingdown:
- flip = identity reflectedabout (origin, right);
- else:
- flip = identity;
- fi;
-
- z1 = attach shifted (-stemwidth / 2, 0);
- upshift := max (0, wwing + 0.1 staff_space + extend);
- z2 = z1 shifted (((unitvector stemslant)
- scaled upshift) transformed flip);
-
- z7 = attach shifted ((stemwidth/2),0);
- z6 = z7 shifted (((unitvector (-xpart stemslant, ypart stemslant))
- scaled upshift) transformed flip);
- z2 - z3 = ( 0.38 staff_space, 0.05 htip) transformed flip;
- z6 - z5 = (-0.38 staff_space, 0.05 htip) transformed flip;
-
- z4 = attach shifted ((-0.2 stemwidth, upshift + htip)
- transformed flip);
- z4'= attach shifted (( 0.2 stemwidth, upshift + htip)
- transformed flip);
-
- % `angle_wing_bot' is the angle at which the arc
- % from z2 to z3a enters z3a
- % `angle_wing_top' is the angle at which the arc
- % from z3b to z4 leaves z3b
- % `angle_tip' is the angle at which the arc
- % from z4 to z4' leaves z4
- angle_wing_bot = 30;
- angle_wing_top = 55;
- angle_tip = 68;
-
- z3a = z3 shifted ((((dir angle_wing_bot) rotated -90)
- scaled wwing) transformed flip);
- z3b = z3 shifted ((((dir angle_wing_top) rotated 90)
- scaled wwing) transformed flip);
-
- z5a = z5 shifted ((((dir (180 - angle_wing_bot)) rotated 90)
- scaled wwing) transformed flip);
- z5b = z5 shifted ((((dir (180 - angle_wing_top)) rotated -90)
- scaled wwing) transformed flip);
-
- % Draw the arrow
- pickup pencircle scaled 1;
- fill z1
- -- z2{stemslant transformed flip}
- .. {(-dir angle_wing_bot) transformed flip}z3a
- .. z3b{(dir angle_wing_top) transformed flip}
- .. z4{(dir angle_tip) transformed flip}
- .. z4'{(dir (-angle_tip)) transformed flip}
- .. {(dir (-angle_wing_top)) transformed flip}z5b
- .. z5a{(-dir (-angle_wing_bot)) transformed flip}
- .. z6{((-stemslant) reflectedabout (origin, up)) transformed flip}
- -- z7
- -- cycle;
-
- labels (range 0 thru 7, 4', 3a, 3b, 5a, 5b);
-endgroup;
-enddef;
-
-save remember_pic;
-picture remember_pic;
-
-save sharp_beamheight;
-sharp_beamheight# := 0.3 staff_space# + stafflinethickness#;
-
-%
-% The beams of most sharps have horizontal endings (as if drawn with
-% a square pen). [Wanske] does not mention this, so we'll just ignore
-% this fact.
-%
-
-def draw_meta_sharp (expr width, offset) =
- save beamwidth, beamslope;
- save ne, nw_dist;
- pair ne, nw_dist;
-
- beamwidth := width;
-
- define_whole_vertical_blacker_pixels (sharp_beamheight);
-
- clearxy;
-
- beamslope = sharp_beamheight / beamwidth;
-
- pickup pencircle scaled 2 blot_diameter;
-
- rt x2 - lft x1 = beamwidth;
- z2 = z1 + whatever * (beamwidth, sharp_beamheight);
- .5 [z1, z3] = (.5 w, offset);
- x3 = x2;
- top y2 - bot y3 = sharp_beamheight;
- x4 = x1;
- top y1 - bot y4 = sharp_beamheight;
-
- ne = unitvector (z2 - z1);
- nw_dist = (ne rotated 90) * blot_diameter;
-
- fill lft z1{up}
- ... (z1 + nw_dist){ne}
- -- (z2 + nw_dist){ne}
- ... rt z2{down}
- -- rt z3{down}
- ... (z3 - nw_dist){-ne}
- -- (z4 - nw_dist){-ne}
- ... lft z4{up}
- -- cycle;
-
- labels (1, 2, 3, 4);
-enddef;
-
-
-def draw_sharp(expr arrowup, arrowdown) =
- save stem, stemx, stemwidth;
- save outer_space, interbeam;
- save stemlength, extendleft, extendright, height, depth;
-
- stemwidth# := stafflinethickness# + .05 staff_space#;
- define_whole_blacker_pixels (stemwidth);
-
- interbeam := 1.05 staff_space_rounded;
-
- stemlength# := 1.5 staff_space#;
- define_pixels (stemlength);
-
- height# = stemlength#;
- depth# = stemlength#;
- extendright# = 0;
- extendleft# = 0;
- if arrowup:
- height# := height# + 1.2 staff_space#;
- extendright# := extendright# + 1.5 stafflinethickness#;
- fi;
- if arrowdown:
- depth# := depth# + 1.2 staff_space#;
- extendleft# := extendleft# + 1.5 stafflinethickness#;
- fi;
- define_pixels (extendleft, extendright);
- set_char_box (extendleft#, 1.1 staff_space#, depth#, height#);
-
- stem := 7 / 16 * w;
- stemx := hround stem;
- outer_space := hround ((w - stemx - stemwidth) / 2);
-
- w := 2 outer_space + stemx + stemwidth;
- d := d - feta_space_shift;
-
- draw_meta_sharp (w, -.5 interbeam);
- draw_meta_sharp (w, -.5 interbeam + vround interbeam);
-
- % expand the charbox so that it encloses the whole arrow;
- % this must not happen earlier because some commands above
- % still rely on the old width
- w := w + extendright;
-
- pickup pencircle scaled stemwidth;
-
- lft x5 = lft x6 = outer_space;
- lft x7 = lft x8 = outer_space + stemx;
- bot y5 = -stemlength;
- top y6 = vround (1.5 staff_space - stem * beamslope);
- bot y7 = -top y6 + feta_space_shift;
- top y8 = stemlength;
-
- labels (5, 6, 7, 8);
-
- draw_gridline (z5, z6, stemwidth);
- draw_gridline (z7, z8, stemwidth);
-
- if arrowup:
- draw_arrow (z8, stemwidth, up,
- stafflinethickness / 2 + stemwidth / 2, false);
- fi;
- if arrowdown:
- draw_arrow (z5, stemwidth, up,
- stafflinethickness / 2 + stemwidth / 2, true);
- fi;
-
- remember_pic := currentpicture;
-
- draw_staff (-2, 2, 0);
-enddef;
-
-
-fet_beginchar ("Sharp", "sharp");
- draw_sharp (false, false);
-fet_endchar;
-
-
-draw_shifted_too;
-
-
-fet_beginchar ("Arrowed Sharp (arrow up)", "sharp.arrowup");
- draw_sharp (true, false);
-fet_endchar;
-
-
-draw_shifted_too;
-
-
-fet_beginchar ("Arrowed Sharp (arrow down)", "sharp.arrowdown");
- draw_sharp (false, true);
-fet_endchar;
-
-
-draw_shifted_too;
-
-
-fet_beginchar ("Arrowed Sharp (arrows up and down)", "sharp.arrowboth");
- draw_sharp (true, true);
-fet_endchar;
-
-
-draw_shifted_too;
-
-
-fet_beginchar ("1/2 Sharp", "sharp.slashslash.stem");
- save stem, stemwidth;
- save outer_space, interbeam;
-
- stemwidth# := stafflinethickness# + .05 staff_space#;
- define_whole_blacker_pixels (stemwidth);
-
- interbeam := 1.05 staff_space_rounded;
-
- set_char_box (0, 0.7 staff_space#,
- 1.5 staff_space#, 1.5 staff_space#);
-
- stem := 7 / 16 * w;
- outer_space := hround ((w - stemwidth) / 2);
-
- w := 2 outer_space + stemwidth;
- d := d - feta_space_shift;
-
- draw_meta_sharp (w, -.5 interbeam);
- draw_meta_sharp (w, -.5 interbeam + vround interbeam);
-
- pickup pencircle scaled stemwidth;
-
- lft x5 = lft x6 = outer_space;
- top y6 = vround (1.5 staff_space - .5 stem);
- bot y5 = -top y6 + feta_space_shift;
-
- labels (5, 6);
-
- draw_gridline (z5, z6, stemwidth);
-
- remember_pic := currentpicture;
-
- draw_staff (-2, 2, 0);
-fet_endchar;
-
-
-draw_shifted_too;
-
-
-fet_beginchar ("Sharp (3 beams)", "sharp.slashslashslash.stemstem");
- save stem, stemx, stemwidth;
- save outer_space, interbeam;
- save sharp_beamheight;
-
- sharp_beamheight# := 0.22 staff_space# + stafflinethickness#;
-
- stemwidth# := stafflinethickness# + .05 staff_space#;
- define_whole_blacker_pixels (stemwidth);
-
- interbeam := 1.2 staff_space_rounded;
-
- set_char_box (0, 1.1 staff_space#,
- 1.5 staff_space#, 1.5 staff_space#);
-
- stem := 7 / 16 * w;
- stemx := hround stem;
- outer_space := hround ((w - stemx - stemwidth) / 2);
-
- w := 2 outer_space + stemx + stemwidth;
- d := d - feta_space_shift;
-
- draw_meta_sharp (.88 w, -.5 interbeam);
- draw_meta_sharp (.88 w, -.5 interbeam + vround interbeam);
- sharp_beamheight# := 1/.88 sharp_beamheight#;
- draw_meta_sharp (w, 0);
-
- pickup pencircle scaled stemwidth;
-
- lft x5 = lft x6 = outer_space;
- lft x7 = lft x8 = outer_space + stemx;
- bot y5 = -d;
- top y6 = vround (1.5 staff_space - stem * beamslope);
- bot y7 = -top y6 + feta_space_shift;
- top y8 = h;
-
- labels (5, 6, 7, 8);
-
- draw_gridline (z5, z6, stemwidth);
- draw_gridline (z7, z8, stemwidth);
-
- remember_pic := currentpicture;
-
- draw_staff (-2, 2, 0);
-fet_endchar;
-
-
-draw_shifted_too;
-
-
-fet_beginchar ("1/2 Sharp (3 beams)", "sharp.slashslashslash.stem");
- save stem, stemx, stemwidth;
- save outer_space, interbeam;
- save sharp_beamheight;
-
- sharp_beamheight# := 0.22 staff_space# + stafflinethickness#;
-
- stemwidth# := stafflinethickness# + .05 staff_space#;
- define_whole_blacker_pixels (stemwidth);
-
- interbeam := 1.2 staff_space_rounded;
-
- set_char_box (0, 0.95 staff_space#,
- 1.3 staff_space#, 1.3 staff_space#);
-
- stem := 7 / 16 * w;
- outer_space := hround ((w - stemwidth) / 2);
-
- w := 2 outer_space + stemwidth;
- d := d - feta_space_shift;
-
- draw_meta_sharp (.8 w, -.5 interbeam);
- draw_meta_sharp (.8 w, -.5 interbeam + vround interbeam);
- sharp_beamheight# := 1/.8 sharp_beamheight#;
- draw_meta_sharp (w, 0);
-
- pickup pencircle scaled stemwidth;
-
- lft x5 = lft x6 = outer_space;
- top y6 = vround (1.5 staff_space - .5 stem);
- bot y5 = -top y6 + feta_space_shift;
- labels (5, 6);
-
- draw_gridline (z5, z6, stemwidth);
-
- remember_pic := currentpicture;
-
- draw_staff (-2, 2, 0);
-fet_endchar;
-
-
-draw_shifted_too;
-
-
-fet_beginchar ("3/4 Sharp", "sharp.slashslash.stemstemstem");
- save stem, stemx, stemwidth;
- save outer_space, interbeam;
-
- stemwidth# := stafflinethickness# + .05 staff_space#;
- define_whole_blacker_pixels (stemwidth);
-
- interbeam := 1.05 staff_space_rounded;
-
- set_char_box (0, 1.6 staff_space#,
- 1.5 staff_space#, 1.5 staff_space#);
-
- stem := 9 / 32 * w;
- stemx := hround stem;
- outer_space := hround ((w - 2 stemx - stemwidth) / 2);
-
- w := 2 outer_space + 2 stemx + stemwidth;
- d := d - feta_space_shift;
-
- draw_meta_sharp (w, -.5 interbeam);
- draw_meta_sharp (w, -.5 interbeam + vround interbeam);
-
- pickup pencircle scaled stemwidth;
-
- lft x5 = lft x6 = outer_space;
- lft x7 = lft x8 = outer_space + stemx;
- lft x9 = lft x10 = outer_space + 2 stemx;
- bot y5 = -d;
- top y6 = vround (1.5 staff_space - 2 stem * beamslope);
- bot y9 = -top y6 + feta_space_shift;
- top y10 = h;
- y7 = .5 [y5, y9];
- y8 = .5 [y6, y10];
-
- labels (5, 6, 7, 8, 9, 10);
-
- draw_gridline (z5, z6, stemwidth);
- draw_gridline (z7, z8, stemwidth);
- draw_gridline (z9, z10, stemwidth);
-
- remember_pic := currentpicture;
-
- draw_staff (-2, 2, 0);
-fet_endchar;
-
-
-draw_shifted_too;
-
-
-%
-% The stems of the natural are brushed (at least, in Barenreiter SCS)
-%
-
-def draw_natural (expr arrowup, arrowdown) =
- save stemwidth, top_stem_thick;
- save ne, pat_top, pat_bottom;
- save depth, height, extendleft, extendright, stemlength;
- save brush_scale_up, brush_scale_down;
- pair ne;
- path pat_top, pat_bottom;
-
- top_stem_thick# = stafflinethickness# + .10 staff_space#;
- stemwidth# = 0.09 staff_space# + .5 stafflinethickness#;
- define_whole_blacker_pixels (top_stem_thick, stemwidth);
-
- stemlength# = 1.5 staff_space#;
- define_pixels (stemlength);
-
- height# = stemlength#;
- depth# = stemlength#;
- extendleft# = 0;
- extendright# = 0;
- if arrowup:
- extendleft# := 3 stafflinethickness#;
- height# := height# + 1.2 staff_space#;
- fi;
- if arrowdown:
- extendright# := 3.15 stafflinethickness#;
- depth# := depth# + 1.2 staff_space#;
- fi;
- define_pixels (extendright);
-
- set_char_box (extendleft#, 2/3 staff_space#, depth#, height#);
-
- d := d - feta_space_shift;
-
- pickup pencircle scaled stemwidth;
-
- brush_scale_up := 1.0;
- brush_scale_down := 1.0;
- % to look nice, arrowed stems must be less brushed
- if arrowup:
- brush_scale_up := 0.85;
- fi;
- if arrowdown:
- brush_scale_down := 0.85;
- fi;
-
- penpos1 (top_stem_thick, 0);
- penpos3 (top_stem_thick, 0);
- penpos2 (stemwidth, 0);
- penpos4 (stemwidth, 0);
- % z1' and z3' are needed for the arrowed accidentals
- penpos1' (top_stem_thick * brush_scale_up, 0);
- penpos3' (top_stem_thick * brush_scale_down, 0);
-
- x2r = w;
- x4l = 0;
- x3 = x3' = x2;
- x1 = x1' = x4;
-
- y1 = y1' = stemlength;
- y3 = y3' = -stemlength;
- top y2 = vround (staff_space - 3/2 stafflinethickness);
- y4 = -y2 + feta_space_shift;
-
- pat_bottom := z4r{z4r - z1r}
- .. bot z4
- .. z4l{z1l - z4l};
- fill simple_serif (z1'l, z1'r, -30)
- -- pat_bottom
- -- cycle;
-
- pat_top := z2r{z2r - z3r}
- .. top z2
- .. z2l{z3l - z2l};
- fill simple_serif (z3'l, z3'r, 30)
- -- pat_top
- -- cycle;
-
- ne = (x2 - x4, stafflinethickness);
-
- z11' = z3l + whatever * (z2l - z3l);
- y11' = vround (.5 (staff_space - stafflinethickness));
- z11 = z11' + whatever * ne;
- x11 = x12;
- z12 = directionpoint -ne of pat_top;
- z13 = z12 + whatever * ne;
- x13 = x1;
- z14 = z11 + whatever * ne;
- x14 = x1;
-
- z21' = z4r + whatever * (z1r - z4r);
- y21' = -y11' + feta_space_shift;
- z21 = z21' + whatever * ne;
- x21 = x22;
- z22 = directionpoint -ne of pat_bottom;
- z23 = z22 + whatever * ne;
- x23 = x3;
- z24 = z21 + whatever * ne;
- x24 = x3;
-
- fill z11
- -- z12
- -- z13
- -- z14
- -- cycle;
- fill z21
- -- z22
- -- z23
- -- z24
- -- cycle;
-
- penlabels (1, 1', 2, 3, 3', 4);
- labels (11, 11', 12, 13, 14, 21, 21', 22, 23, 24);
-
- if arrowup:
- draw_arrow (z1, top_stem_thick * brush_scale_up,
- z1'l - z4l, stafflinethickness / 2, false);
- fi;
- if arrowdown:
- draw_arrow (z3, top_stem_thick * brush_scale_down,
- z2r - z3'r, stafflinethickness / 2, true);
- w := w + extendright;
- fi;
-
- remember_pic := currentpicture;
-
- draw_staff (-2, 2, 0);
-enddef;
-
-
-fet_beginchar ("Natural", "natural");
- draw_natural (false, false);
-fet_endchar;
-
-
-draw_shifted_too;
-
-
-fet_beginchar ("Arrowed Natural (arrow up)", "natural.arrowup");
- draw_natural (true, false);
-fet_endchar;
-
-
-draw_shifted_too;
-
-
-fet_beginchar ("Arrowed Natural (arrow down)", "natural.arrowdown");
- draw_natural (false, true);
-fet_endchar;
-
-
-draw_shifted_too;
-
-
-fet_beginchar ("Arrowed Natural (arrows up and down)", "natural.arrowboth");
- draw_natural (true, true);
-fet_endchar;
-
-
-draw_shifted_too;
-
-
-%
-% Dedicated to my mom. (3/10/97)
-%
-% Mamma, ik hou van je; kom je alsjeblieft terug?
-% -- HW
-%
-%
-% TODO: remove crook_fatness
-% TODO: document, simplify!
-%
-
-def draw_meta_flat (expr xcenter, w, crook_fatness, arrowup, arrowdown) =
- save crook_thinness;
- save bottom_overshoot, bot_crook_dir;
- save top_stem_thick, top_stem_thick_orig;
- save bottom_stem_thick, hair, smaller_hole;
- save top_crook_thinness;
- save zwiep;
- save center;
- pair center, bot_crook_dir;
- save clearing, clearing_orig;
-
- clearxy;
-
- % the stem shouldn't reach the top staff line.
- %% TODO: should take from height.
- %
- % TODO: parameterize this
- %
- if w >= 0.75 staff_space:
- smaller_hole = 0.35 stafflinethickness;
- else:
- smaller_hole = 0;
- fi;
- crook_thinness = .7 stafflinethickness + .06 staff_space;
- top_crook_thinness = 1 stafflinethickness + .065 staff_space;
- clearing = 1.7 stafflinethickness;
- clearing_orig = clearing;
- if arrowup:
- clearing := 0.5 staff_space;
- fi;
- bottom_overshoot = stafflinethickness;
-
- bottom_stem_thick# = 0.06 staff_space# + 0.6 stafflinethickness#;
- top_stem_thick# = 0.1 staff_space# + 1.2 stafflinethickness#;
- top_stem_thick_orig# = top_stem_thick#;
- if arrowup:
- % to look nice, arrowed stems should be less brushed
- top_stem_thick# := top_stem_thick# * 0.8;
- fi;
- define_whole_blacker_pixels (bottom_stem_thick, top_stem_thick,
- top_stem_thick_orig);
-
- if odd (top_stem_thick - bottom_stem_thick):
- top_stem_thick := top_stem_thick - 1;
- fi;
- if odd (top_stem_thick_orig - bottom_stem_thick):
- top_stem_thick_orig := top_stem_thick_orig - 1;
- fi;
-
- center = (xcenter, 0);
-
- x1l = hround (xcenter - .5 top_stem_thick);
- y1 = vround (2 staff_space - clearing);
- x2l = hround (xcenter - .5 bottom_stem_thick);
- y2 = -.5 staff_space - .5 stafflinethickness;
- % z16 and the `*_orig' variables are needed for arrowed accidentals
- % because their inner part should be unchanged from plain ones but
- % the points z3l, z3r, and z10 depend on values that are different
- % for arrowed accidentals
- x16l = hround (xcenter -.5 top_stem_thick_orig);
- y16 = vround (2 staff_space - clearing_orig);
-
- penpos1 (top_stem_thick, 0);
- penpos16 (top_stem_thick_orig, 0);
- penpos2 (bottom_stem_thick, 0);
-
- y3l = vfloor ((staff_space - stafflinethickness) / 2);
- z3l = whatever [z2r, z1r];
- z3r = .3 [z2r,
- (z16r shifted (0, clearing_orig - 1.7 stafflinethickness))]
- + (smaller_hole, 0);
- x3r := hceiling x3r;
-
- % we insert z3l to get better conversion with mf2pt1
- fill simple_serif (z1r, z1l, 30)
- -- z2l
- -- z2r
- -- z3l
- -- cycle;
-
- z10 = whatever [z2r, z16r] + (smaller_hole, 0);
- y10 = -1/10 staff_space;
- x10 := hceiling x10;
-
- x11 = xcenter + bottom_overshoot / 3;
- y11 = -vround (.5 (staff_space + stafflinethickness)
- + bottom_overshoot);
-
- x2a = 0.2[x2r, x7];
- y2a = 1.5[y2, y11];
-
- penpos4 (whatever, 53);
-
- y4l - y4r = top_crook_thinness;
- y5r = .15 staff_space;
- x5l = hround (w + xcenter);
- y4 = staff_space / 2;
- x4r = .45 [x5r, x3r];
- y4l := vround y4l;
-
- penpos5 (crook_fatness, -175);
-
- bot_crook_dir = unitvector ((x5l, 0) - z11);
- z8 = z11 + whatever * bot_crook_dir;
- y8 = -staff_space / 2;
-
- z7 = z8
- + whatever * bot_crook_dir
- + crook_thinness * (bot_crook_dir rotated 90);
- x7 = .1 [x3r, x8];
-
- unfill z3r{z3r - z10}
- .. z4r{right}
- .. z5r{down}
- .. z7{-bot_crook_dir}
- & z7
- .. z10{z3r - z10}
- -- cycle;
-
- if arrowdown:
- fill z2l{down}
- .. z2a{up}
- .. z8{bot_crook_dir}
- .. z5l{up}
- .. z4l{left}
- .. z3l
- -- cycle;
- else:
- fill z2l{down}
- .. z11{right}
- .. z8{bot_crook_dir}
- .. z5l{up}
- .. z4l{left}
- .. z3l
- -- cycle;
- fi;
-
- if arrowup:
- draw_arrow (z1, top_stem_thick, z1l - z2l,
- 0.5 stafflinethickness, false);
- fi;
- if arrowdown:
- draw_arrow ((0.5 [x2l, x2a], y2), x2a - x2l, up,
- staff_space / 2, true);
- fi;
-enddef;
-
-
-def draw_arrowed_meta_flat (expr xcenter, width, crook_fatness,
- arrowup, arrowdown) =
- save depth, height, extendleft;
-
- depth# = 0.6 staff_space#;
- height# = 1.9 staff_space#;
- extendleft# := 1.2 stafflinethickness#;
- if arrowup:
- extendleft# := 3.45 stafflinethickness#;
- height# := height# + 0.8 staff_space#;
- fi;
- if arrowdown:
- extendleft# := 3.45 stafflinethickness#;
- depth# := depth# + 1.6 staff_space#;
- fi;
-
- set_char_box (extendleft#, width, depth#, height#);
- draw_meta_flat(xcenter, w, crook_fatness, arrowup, arrowdown);
-enddef;
-
-%
-% unfortunately, 600dpi is not enough to show the brush of the stem.
-%
-
-fet_beginchar ("Flat", "flat");
- draw_arrowed_meta_flat (0, 0.8 staff_space#, 0.31 staff_space,
- false, false);
- penlabels (range 0 thru 11);
-
- remember_pic := currentpicture;
-
- draw_staff (-2, 2, 0);
-fet_endchar;
-
-
-draw_shifted_too;
-
-
-fet_beginchar ("Arrowed Flat (arrow up)", "flat.arrowup");
- draw_arrowed_meta_flat (0, 0.8 staff_space#, 0.31 staff_space,
- true, false);
- penlabels (range 0 thru 23);
-
- remember_pic := currentpicture;
-
- draw_staff (-2, 2, 0);
-fet_endchar;
-
-
-draw_shifted_too;
-
-
-fet_beginchar ("Arrowed Flat (arrow down)", "flat.arrowdown");
- draw_arrowed_meta_flat (0, 0.8 staff_space#, 0.31 staff_space,
- false, true);
- penlabels (range 0 thru 23);
-
- remember_pic := currentpicture;
-
- draw_staff (-2, 2, 0);
-fet_endchar;
-
-
-draw_shifted_too;
-
-
-fet_beginchar ("Arrowed Flat (arrow up and down)", "flat.arrowboth");
- draw_arrowed_meta_flat (0, 0.8 staff_space#, 0.31 staff_space,
- true, true);
- penlabels (range 0 thru 23);
-
- remember_pic := currentpicture;
-
- draw_staff (-2, 2, 0);
-fet_endchar;
-
-
-draw_shifted_too;
-
-
-fet_beginchar ("Flat (slashed)", "flat.slash");
- set_char_box (.4 staff_space#, .8 staff_space#,
- 0.6 staff_space#, 1.9 staff_space#);
-
- draw_meta_flat (0, w, 0.31 staff_space, false, false);
-
- clearxy;
-
- save slope, slash_width;
- slope = 0.5;
- slash_width = w;
-
- z11 = (0, h / 2);
- z12 = z11 - (slash_width, slash_width * slope) / 2;
- z13 = z11 + (slash_width, slash_width * slope) / 2;
- penpos12 (1.5 stafflinethickness, angle (z13 - z12) - 90);
- penpos13 (1.5 stafflinethickness, angle (z13 - z12) - 90);
-
- z14 = z12 - .75 stafflinethickness * unitvector (z13 - z12);
- z15 = z13 + .75 stafflinethickness * unitvector (z13 - z12);
-
- fill z13r
- .. z15
- .. z13l
- -- z12l
- .. z14
- .. z12r
- -- z13r
- .. cycle;
-
- penlabels (12, 13);
- labels (14, 15);
-
- remember_pic := currentpicture;
-
- draw_staff (-2, 2, 0);
-fet_endchar;
-
-
-fet_beginchar ("Flat (slashed twice)", "flat.slashslash");
- set_char_box (.4 staff_space#, .8 staff_space#,
- 0.6 staff_space#, 1.9 staff_space#);
-
- draw_meta_flat (0, w, 0.31 staff_space, false, false);
-
- clearxy;
-
- save slope, slash_width;
- slope = 0.5;
- slash_width = w;
-
- z11 = (0, 5/12 h);
- z12 = z11 - (slash_width, slash_width * slope) / 2;
- z13 = z11 + (slash_width, slash_width * slope) / 2;
- penpos12 (1.5 stafflinethickness, angle (z13 - z12) - 90);
- penpos13 (1.5 stafflinethickness, angle (z13 - z12) - 90);
-
- z14 = z12 - .75 stafflinethickness * unitvector (z13 - z12);
- z15 = z13 + .75 stafflinethickness * unitvector (z13 - z12);
-
- fill z13r
- .. z15
- .. z13l
- -- z12l
- .. z14
- .. z12r
- -- z13r
- .. cycle;
-
- penlabels (12, 13);
- labels (14, 15);
-
- z21 = (0, 2/3 h);
- z22 = z21 - (slash_width, slash_width * slope) / 2;
- z23 = z21 + (slash_width, slash_width * slope) / 2;
- penpos22 (1.5 stafflinethickness, angle (z23 - z22) - 90);
- penpos23 (1.5 stafflinethickness, angle (z23 - z22) - 90);
-
- z24 = z22 - .75 stafflinethickness * unitvector (z23 - z22);
- z25 = z23 + .75 stafflinethickness * unitvector (z23 - z22);
-
- fill z23r
- .. z25
- .. z23l
- -- z22l
- .. z24
- .. z22r
- -- z23r
- .. cycle;
-
- penlabels (22, 23);
- labels (24, 25);
-
- remember_pic := currentpicture;
-
- draw_staff (-2, 2, 0);
-fet_endchar;
-
-
-fet_beginchar ("Flatflat (mirrored)", "mirroredflat.flat");
- set_char_box (0, 1.6 staff_space#,
- 0.6 staff_space#, 1.9 staff_space#);
-
- % This is a modified version of `draw_meta_flat'.
-
- save crook_thinness, crook_fatness;
- save bottom_overshoot, bot_crook_dir;
- save top_stem_thick, bottom_stem_thick, hair, smaller_hole;
- save top_crook_thinness;
- save zwiep;
- save center;
- pair center, bot_crook_dir;
- save clearing, wid;
- save pat;
- path pat;
-
- clearxy;
-
- wid = w / 2;
-
- % the stem shouldn't reach the top staff line.
- %% TODO: should take from height.
- %
- % TODO: parameterize this
- %
- if wid >= 0.75 staff_space:
- smaller_hole = 0.35 stafflinethickness;
- else:
- smaller_hole = 0;
- fi;
- clearing = 1.7 stafflinethickness;
- crook_thinness = .7 stafflinethickness + .06 staff_space;
- crook_fatness = 0.31 staff_space;
- top_crook_thinness = 1 stafflinethickness + .065 staff_space;
- bottom_overshoot = stafflinethickness;
-
- bottom_stem_thick# = 0.06 staff_space# + 0.6 stafflinethickness#;
- top_stem_thick# = 0.1 staff_space# + 1.2 stafflinethickness#;
- define_whole_blacker_pixels (bottom_stem_thick, top_stem_thick);
-
- if odd (top_stem_thick - bottom_stem_thick):
- top_stem_thick := top_stem_thick - 1;
- fi;
-
- center = (0, 0);
-
- x1l = hround (-.5 top_stem_thick);
- y1 = vround (2 staff_space - clearing);
- x2l = hround (-.5 bottom_stem_thick);
- y2 = -.5 staff_space - .5 stafflinethickness;
-
- penpos1 (top_stem_thick, 0);
- penpos2 (bottom_stem_thick, 0);
-
- y3l = vfloor ((staff_space - stafflinethickness) / 2);
- z3l = whatever [z2r, z1r];
- z3r = .3 [z2r, z1r] + (smaller_hole, 0);
- x3r := hceiling x3r;
-
- z10 = whatever [z2r, z1r] + (smaller_hole, 0);
- y10 = -1/10 staff_space;
- x10 := hceiling x10;
-
- x11 = bottom_overshoot / 3;
- y11 = -vround (.5 (staff_space + stafflinethickness)
- + bottom_overshoot);
-
- penpos4 (whatever, 53);
-
- y4l - y4r = top_crook_thinness;
- y5r = .15 staff_space;
- x5l = hround (wid);
- y4 = staff_space / 2;
- x4r = .45 [x5r, x3r];
- y4l := vround y4l;
-
- penpos5 (crook_fatness, -175);
-
- bot_crook_dir = unitvector ((x5l, 0) - z11);
- z8 = z11 + whatever * bot_crook_dir;
- y8 = -staff_space / 2;
-
- z7 = z8
- + whatever * bot_crook_dir
- + crook_thinness * (bot_crook_dir rotated 90);
- x7 = .1 [x3r, x8];
-
- pat := z3r{z3r - z10}
- .. z4r{right}
- .. z5r{down}
- .. z7{-bot_crook_dir}
- & z7
- .. z10{z3r - z10}
- -- cycle;
- unfill pat;
- unfill pat xscaled -1;
-
- pat := z11{right}
- .. z8{bot_crook_dir}
- .. z5l{up}
- .. z4l{left}
- .. z3l;
- fill pat
- -- simple_serif (z1r, z1l, 30)
- -- reverse pat xscaled -1 shifted (-feta_eps, 0)
- -- cycle;
-
- currentpicture := currentpicture shifted (w/2, 0);
-
- remember_pic := currentpicture;
-
- draw_staff (-2, 2, 0);
-fet_endchar;
-
-
-draw_shifted_too;
-
-
-fet_beginchar ("Semi flat", "mirroredflat");
- set_char_box (1.2 stafflinethickness#, .8 staff_space#,
- 0.6 staff_space#, 1.9 staff_space#);
-
- draw_meta_flat (0, w, 0.31 staff_space, false, false);
- currentpicture := currentpicture xscaled -1 shifted (w - b, 0);
-fet_endchar;
-
-
-fet_beginchar ("Semi flat", "mirroredflat.backslash");
- set_char_box (.4 staff_space#, .8 staff_space#,
- 0.6 staff_space#, 1.9 staff_space#);
-
- draw_meta_flat (0, w, 0.31 staff_space, false, false);
-
- clearxy;
-
- save slope, slash_width;
- slope = 0.5;
- slash_width = w;
-
- z11 = (0, h / 2);
- z12 = z11 - (slash_width, slash_width * slope) / 2;
- z13 = z11 + (slash_width, slash_width * slope) / 2;
- penpos12 (1.5 stafflinethickness, angle (z13 - z12) - 90);
- penpos13 (1.5 stafflinethickness, angle (z13 - z12) - 90);
-
- z14 = z12 - .75 stafflinethickness * unitvector (z13 - z12);
- z15 = z13 + .75 stafflinethickness * unitvector (z13 - z12);
-
- fill z13r
- .. z15
- .. z13l
- -- z12l
- .. z14
- .. z12r
- -- z13r
- .. cycle;
-
- currentpicture := currentpicture xscaled -1 shifted (w - b, 0);
-
- labels (1, 2, 3);
-fet_endchar;
-
-
-fet_beginchar ("Double Flat", "flatflat");
- save left_wid, overlap, right_wid;
-
- left_wid = .7;
- right_wid = .8;
- overlap = .05;
-
- set_char_box (1.2 stafflinethickness#,
- (left_wid + right_wid - overlap) * staff_space#,
- .6 staff_space#, 1.9 staff_space#);
- draw_meta_flat (0, left_wid * staff_space, 1/3 staff_space,
- false, false);
- draw_meta_flat (hround ((left_wid - overlap) * staff_space),
- right_wid * staff_space, 1/3 staff_space,
- false, false);
-fet_endchar;
-
-
-fet_beginchar ("3/4 Flat", "flatflat.slash");
- save left_wid, overlap, right_wid;
-
- left_wid = .7;
- right_wid = .8;
- overlap = .05;
-
- set_char_box (1.2 stafflinethickness#,
- (left_wid + right_wid - overlap) * staff_space#,
- .6 staff_space#, 1.9 staff_space#);
- draw_meta_flat (0, left_wid * staff_space, 1/3 staff_space,
- false, false);
- draw_meta_flat (hround ((left_wid - overlap) * staff_space),
- right_wid * staff_space, 1/3 staff_space,
- false, false);
-
- %% maybe we should clip part of the stems?
- %% or make the 1st flat smaller?
- %% or reverse it?
- pickup pencircle scaled 2 stafflinethickness;
-
- z12 = round (-.25 w - b, .55 staff_space) + feta_offset;
- z13 = round (.75 w, 1.45 staff_space) + feta_offset;
- penpos12 (2 stafflinethickness, angle (z13 - z12) - 90);
- penpos13 (2 stafflinethickness, angle (z13 - z12) - 90);
-
- z14 = z12 - stafflinethickness * unitvector (z13 - z12);
- z15 = z13 + stafflinethickness * unitvector (z13 - z12);
-
- fill z13r
- .. z15
- .. z13l
- -- z12l
- .. z14
- .. z12r
- -- z13r
- .. cycle;
-
- penlabels (12, 13);
- labels (14, 15);
-
- remember_pic := currentpicture;
-
- draw_staff (-2, 2, 0);
-fet_endchar;
-
-
-draw_shifted_too;
-
-
-fet_beginchar ("Double Sharp", "doublesharp");
- save klaverblad, klaversteel;
- save pat;
- path pat;
-
- klaversteel = 1/15 staff_space;
- klaverblad = .4 staff_space - .5 stafflinethickness;
-
- set_char_box (0, staff_space#, .5 staff_space#, .5 staff_space#);
-
- z1 = (klaversteel, 0);
- z2 = (w / 2 - klaverblad / 10, h - klaverblad);
- z3 = (w / 2, h);
- z4 = z2 reflectedabout ((0, 0), (1, 1));
- z5 = z1 reflectedabout ((0, 0), (1, 1));
-
- labels (1, 2, 3, 4, 5);
-
- pickup pencircle scaled blot_diameter;
-
- x2 := hfloor (rt x2) - blot_diameter / 2;
- x3 := hfloor (rt x3) - blot_diameter / 2;
- y3 := vfloor (top y3) - blot_diameter / 2;
- y4 := vfloor (top y4) - blot_diameter / 2;
-
- pat = (rt z1){dir45}
- .. {right}(bot z2)
- .. rt z2
- -- rt z3{z3 - z2}
- .. top z3{z4 - z3}
- -- top z4{z4 - z3}
- .. (lft z4){down}
- .. {dir 225}(top z5);
- pat := pat
- -- reverse pat xscaled -1 shifted (-feta_eps, 0);
-
- % assure symmetry -- it's more important to center the glyph on the
- % staff line than centering it between staff lines, so we use
- % feta_shift, not feta_space_shift.
- h := h + feta_shift;
-
- fill pat shifted (0, feta_shift)
- -- reverse pat yscaled -1 shifted (0, -feta_eps)
- -- cycle;
-
- % ugh
- currentpicture := currentpicture shifted (hround (w / 2), 0);
-
- remember_pic := currentpicture;
-
- draw_staff (-2, 2, 0);
-fet_endchar;
-
-
-draw_shifted_too;
-
-
-def draw_paren =
- save leftindent;
-
- leftindent := .2 staff_space;
-
- set_char_box (0, .5 staff_space# + stafflinethickness#,
- staff_space#, staff_space#);
-
- d := d - feta_shift;
-
- z1 = (leftindent, h);
- z2 = (w - stafflinethickness, .5 (h - d));
- z3 = (leftindent, -d);
-
- penpos1 (stafflinethickness, 35);
- penpos2 (.1 staff_space + stafflinethickness, 0);
- penpos3 (stafflinethickness, -35);
-
- fill z2l{down}
- .. simple_serif (z3l, z3r, 90)
- .. z2r{up}
- .. simple_serif (z1r, z1l, 90)
- .. z2l{down}
- -- cycle;
-enddef;
-
-
-fet_beginchar ("Right Parenthesis", "rightparen");
- draw_paren;
- penlabels (1, 2, 3);
-
- remember_pic := currentpicture;
-
- draw_staff (-2, 2, 0);
-fet_endchar;
-
-
-draw_shifted_too;
-
-
-fet_beginchar ("Left Parenthesis", "leftparen");
- draw_paren;
-
- currentpicture := currentpicture xscaled -1;
-
- set_char_box (charwd, charbp, chardp, charht);
-fet_endchar;
-
+ input feta-arrow;
+ input feta-sharps;
+ input feta-naturals;
+ input feta-flats;
+ input feta-parenthesis;
fet_endgroup ("accidentals");