%{
-PROPERTIES
-
-name value effect shorthand
-
-[Voice]
-ydirection -1 force stem down \stemdown
-ydirection 0 stem direction free \stemboth
-ydirection 1 force stem up \stemup
-
-pletvisibility 0 show nothing
-pletvisibility 1 show number
-pletvisibility 2 show (number and bracket)-if-no-beam
-pletvisibility 3 show number, and bracket-if-no-beam
-pletvisibility 4 show number, and bracket
-
-slurdash 0 normal slurs
-slurdash 1 dotted slurs
-slurdash >1 dashed slurs
-
-slurydirection -1 force stem down \slurdown
-slurydirection 0 stem direction free \slurboth
-slurydirection 1 force stem up \slurup
-
-slurydirection -1 force stem down \slurdown
-slurydirection 0 stem direction free \slurboth
-slurydirection 1 force stem up \slurup
-
-textalignment -1 left alignment of text
-textalignment 0 center alignment of text
-textalignment 1 right alignment of text
-
-[Score?]
-beamslopedamping 0 no damping \beamslopeproportional
-beamslopedamping 1 damping1) \beamslopedamped
-beamslopedamping 100000 zero slope \beamslopezero
-
-[Score?]
-beamquantisation 0 no quantisations \beamposfree
-beamquantisation 1 quantise pos and slope \beamposnormal
-beamquantisation 2 quantise avoide wedge2) \beampostraditional
-
-[Staff]
-keyoctaviation 0 Key signature only for specified octave \specialkey
-keyoctaviation 1 Key signature for all octaves \normalkey
-
-[Staff]
-barAlways 0 none
-barAlways 1 generate bar at every moment
-
-[Staff]
-barAuto 0 none
-barAuto 1 auto-generate bar every measure
-barAtLineStart 0/1 generate bar at beginning of line
-
-[Staff]
-beamAuto 0/1 auto-beam on/off
-beamAutoEnd "num/den" end auto-beam
-beamAutoEnd_8 "num/den" end auto-beam of 8ths
-beamAutoEnd_16 "num/den" end auto-beam of 16ths
-
-timeSignatureStyle C Use C and stroked C for 4/4,2/2
-timeSignatureStyle old Use old style mensuration marks
-timeSignatureStyle 1 Use single number
-timeSignatureStyle "" Use normal two-digit time signature
-timeSignatureStyle Cn/m Set symbol explicitly, n/m=2/2 or 4/4
-timeSignatureStyle oldn/m Set symbol explicitly,
- n/m=2/2,3/2,3/4,4/4,6/4 or 9/4.
-[Staff]
-voltaVisibility 0/1 on/off
-voltaSpannerDuration Rat. Coda kludge: set length of volta-spanner,
- typically set to one measure: "1"
-
-[Staff?]
-instrument ascii midi instrument table lookup
-
-[Score]
-chordInversion 0/1 Find and display chord with inversion?
-
-
-1) after beam slope damping table suggested in [Wanske]
-2) [Wanske] as well as [Ross] suggests that beams sloped upward must not
- start sitting on a staffline, and beams sloped downward must not hang
- from a staffline (similar for beam-ends). This would create a wedge
- that is traditionally being avoided because it could easily be filled-up
- with ink.
- However, avoiding these wedges restricts the freedom of beams quite a lot
- while they don't seem to be a problem in modern printing.
- In no piece of sheetmusic engraved after 1953 (Baerenreiter) i've seen
- these wedges being avoided.
+SEE THE REFERENCE MANUAL FOR EXPLANATIONS.
%}
+\version "1.3.4";
+
%hmm, (these) abbrevs suck, imo
% i guess they're meant as some form of doco
% that's what i use them for...
-stemup =
- \property Voice.ydirection = \up
-stemboth= \property Voice.ydirection = \center
-stemdown = \property Voice.ydirection = \down
-
-slurup = \notes {
- s1*0
- \property Voice.slurydirection = \up
- }
-slurboth= \notes {
- s1*0
- \property Voice.slurydirection = \center
-}
-slurdown = \notes {
- s1*0
- \property Voice.slurydirection = \down
-}
-shifton = \property Voice.hshift = 1
-shiftoff = \property Voice.hshift = 0
+stemup = \property Voice.verticalDirection = \up
+stemboth= \property Voice.verticalDirection = \center
+stemdown = \property Voice.verticalDirection = \down
-onevoice = {
- \stemboth \shiftoff
-}
+slurup = \property Voice.slurVerticalDirection = \up
+slurboth = \property Voice.slurVerticalDirection = \center
+slurdown = \property Voice.slurVerticalDirection = \down
+shifton = \property Voice.horizontalNoteShift = #1
+shiftoff = \property Voice.horizontalNoteShift = #0
-voiceone = {
- \type Voice = one
- \stemup
-}
+cadenzaOn = \property Score.timing = ##f
+cadenzaOff = { \property Score.timing = ##t
+ \property Score.measurePosition = #(make-moment 0 1)
+ }
-voicetwo = {
- \type Voice = two
- \stemdown
+
+onevoice = {
+ \stemboth \shiftoff
}
-voicethree = {
- \type Voice = three
+voiceone = \stemup
+voicetwo = \stemdown
+voicethree = {
\stemup
-
+ \shifton
}
-voicefour = {
- \type Voice = four
+voicefour = {
\stemdown
\shifton
}
-onestaff =
- \translator Staff=one
-
-
-staffone = {
- \translator Staff=one
- \property Staff.ydirection = \center
- \property Staff.hshift = 0
-}
-
-stafftwo = {
- \translator Staff=two
- \property Staff.ydirection = \center
- \property Staff.hshift = 0
-}
-
-staffthree = {
- \translator Staff=three
- \property Staff.ydirection = \center
- \property Staff.hshift = 0
-}
-
-stafffour = {
- \translator Staff=four
- \property Staff.ydirection = \center
- \property Staff.hshift = 0
-}
-
% ugh, cluttering global namespace...
-none=0
-free=0
-normal=1
-traditional=2
+
+% ugh2.
infinity=10000
beamslopeproportional =
- \property Score.beamslopedamping = \none
+ \property Score.beamSlopedamping = 0
beamslopedamped =
- \property Score.beamslopedamping = \normal
+ \property Score.beamSlopedamping = 1
beamslopezero =
- \property Score.beamslopedamping = \infinity
+ \property Score.beamSlopedamping = \infinity
% this sucks, you'd want to pass an array, at least
% (or embedded code: you still can't dictate the slope / stemlength)
beamposfree =
- \property Score.beamquantisation = \none
+ \property Score.beamQuantisation = 0
beamposnormal =
- \property Score.beamquantisation = \normal
+ \property Score.beamQuantisation = 1
beampostraditional =
- \property Score.beamquantisation = \traditional
+ \property Score.beamQuantisation = 2
slurnormal =
- \property Voice.slurdash = ""
+ \property Voice.slurDash = ""
-slurdotted =
- \property Voice.slurdash = 1
+slurdotted =
+ \property Voice.slurDash = 1
-%{
- for grace note hack, see input/test/grace.ly
-%}
-pletoff = {
- \property Voice.pletvisibility = 0
-}
-pleton = {
- \property Voice.pletvisibility = 3
-}
-tiny = {
- \property Voice.fontsize= "-2"
- \pletoff %urg
-}
+tupletoff =
+ \property Voice.tupletVisibility = 0
-small = {
- \property Voice.fontsize= "-1"
-}
+tupleton =
+ \property Voice.tupletVisibility = 3
-normalsize = {
- \property Voice.fontsize= "0"
- \pleton %urg
-}
+tiny =
+ \property Voice.fontSize= -2
-%{
- [urg: try at] temporary grace note hack
- the total visible duration of the grace notes must be half
- the duration of the 'at' note: e.g.:
-
- \grace b8 \graceat c4 \ecarg
- \grace c16 b16 \graceat c4 \ecarg
-
-grace = {
- \tiny
-% it would be so cool not to have to specify these factors each time...
-% :-(
- \property Voice.pletvisibility = 0
- \[1/16
-}
-graceat = \melodic {
- \normalsize
- \property Voice.pletvisibility = 0
- \] \[31/32
-}
+small =
+ \property Voice.fontSize= -1
-ecarg = \melodic {
- \property Voice.pletvisibility = 0
- \]
- \property Voice.pletvisibility = 3
+
+normalsize = {
+ \property Voice.fontSize= 0
}
-%}
normalkey = {
- \property Staff.keyoctaviation = 1
+ \property Staff.keyOctaviation = 1
}
specialkey = {
- \property Staff.keyoctaviation = 0
+ \property Staff.keyOctaviation = 0
}
+% End the incipit and print a ``normal line start''.
+endincipit = \notes{
+ \partial 16; s16 % Hack to handle e.g. \bar ".|"; \endincipit
+ \property Staff.clefStyle = #"fullSizeChanges"
+ \nobreak \bar "";
+}
+
+autoBeamOff = \property Voice.noAutoBeaming = ##t
+autoBeamOn = \property Voice.noAutoBeaming = ##f
+
+
+emptyText = \property Voice.textEmptyDimension = ##t
+fatText = \property Voice.textEmptyDimension = ##f
+