\include \paperfile;
\include "paper.ly";
-interline = \staffheight / 4.0;
+staffspace = \staffheight / 4.0;
+stafflinethickness = \staffspace / 10.0;
+% deprecated
+interline = \staffspace;
-stafflinethickness = \interline / 10.0;
% urg, need grace_ versions of these too?
-beam_thickness = 0.52 * (\interline - \stafflinethickness);
+beam_thickness = 0.52 * (\staffspace - \stafflinethickness);
#'beam-thickness = \beam_thickness; %% UGR
-interbeam = (2.0 * \interline + \stafflinethickness - \beam_thickness) / 2.0;
-interbeam4 = (3.0 * \interline - \beam_thickness) / 3.0;
+interbeam = (2.0 * \staffspace + \stafflinethickness - \beam_thickness) / 2.0;
+interbeam4 = (3.0 * \staffspace - \beam_thickness) / 3.0;
%{
The space taken by a note is determined by the formula
#'Stem_tremolo::beam-width = 1.5 * \quartwidth ;
-#'Clef_item::visibility-lambda = #postbreak-only-visibility
-#'Key_item::visibility-lambda = #postbreak-only-visibility
-#'Breathing_sign::visibility-lambda = #non-postbreak-visibility
+#'Clef_item::visibility-lambda = #begin-of-line-visible
+#'Key_item::visibility-lambda = #begin-of-line-visible
+#'Breathing_sign::visibility-lambda = #begin-of-line-invisible
% catch suspect beam slopes, set slope to zero if
% outer stem is lengthened more than
-beam_lengthened = 0.2 * \interline;
+beam_lengthened = 0.2 * \staffspace;
% and slope is running away steeper than
beam_steep_slope = 0.2 / 1.0;
+
+
%{
-dit(code(slur_x_gap)) Horizontal space between note and slur. Set to
-code(\interline / 5) by default.
+ Slur parameters.
+
+ See Documentation/programmer/fonts.doc
+%}
+% Height-limit (h_inf) = factor * staff_space
+slur_height_limit_factor = 2.0;
+slur_ratio = 1.0 / 3.0;
+
+slur_thickness = 1.2 * \stafflinethickness;
+
+%{
+Horizontal space between centre of notehead and slur.
%}
% OSU: suggested gap = ss / 5;
-slur_x_gap = \interline / 5.0;
-slur_y_gap = 0.25 * \interline;
-slur_y_free = 0.75 * \interline;
-slur_x_minimum = 1.5 * \interline;
+slur_x_gap = \staffspace / 5.0;
+slur_y_gap = 0.25 * \staffspace;
+slur_y_free = 0.75 * \staffspace;
+slur_x_minimum = 1.5 * \staffspace;
+
+
+bezier_asymmetry = 1.0;
+bezier_beautiful = 2.0;
+
+% The constants that define the valid areas for the middle control points
+% Used in de_uglyfy. Bit empirical.
+bezier_control1 = 1.5;
+bezier_control2 = 0.8;
+bezier_control3 = -2.0;
+
+% URG: the magic constants for area asymmetry
+bezier_pct_c0 = -0.2;
+bezier_pct_c3 = 0.000006;
+bezier_pct_out_max = 0.8;
+bezier_pct_in_max = 1.2;
+bezier_area_steps = 1.0;
+
+slur_force_blowfit = 0.5;
+slur_beautiful = 0.5;
+
%{
-Like beams, slurs often aren't as steep as the notes they encompass.
-This sets the amount of damping.
+ Tie parameters
%}
-% slope damping: keep dy/dx < slur_slope_damping
-slur_slope_damping = 0.3;
-slur_interstaff_slope_damping = 0.6;
-% height damping: keep h/dx < slur_height_damping
-slur_height_damping = 0.4;
-slur_interstaff_height_damping = 0.5;
-% snap to stem if slur ends closer to stem than
-slur_snap_to_stem = 1.75 * \interline;
-slur_interstaff_snap_to_stem = 2.5 * \interline;
-% maximum dy change allowed by snapping
-slur_snap_max_slope_change = 0.5;
-slur_interstaff_snap_max_slope_change = 0.5;
-slur_thickness = 1.2 * \stafflinethickness;
-
+tie_height_limit_factor = \slur_height_limit_factor;
+tie_ratio = \slur_ratio;
+tie_thickness = \slur_thickness;
-tie_x_minimum = \interline + \slur_x_minimum;
+tie_x_minimum = \staffspace + \slur_x_minimum;
% OSU: tie gap == slur gap
tie_x_gap = \slur_x_gap;
-tie_y_gap = 0.25 * \interline;
+tie_y_gap = 0.25 * \staffspace;
% length of a tie that's a staffspace high
-tie_staffspace_length = 4.0 * \interline;
+tie_staffspace_length = 4.0 * \staffspace;
-% ugh: rename to bow (in bezier.cc and fonts.doc too...)
-
-% used to be 1.4 .
-tie_thickness = 1.2 * \stafflinethickness;
tie_staffline_clearance = 2.0 *\tie_thickness;
-%{
- Specifies the maximum height of slurs.
-%}
-slur_height_limit = \staffheight;
-%{
-Specifes the ratio of slur hight to slur width
-to aim for. Default value is 0.3.
-%}
-% slur_ratio = 0.3;
-% try bit flatter slurs
-slur_ratio = 0.25;
-slur_clip_ratio = 1.2;
-slur_clip_height = 3.0 * \staffheight;
-slur_clip_angle = 100.0;
-slur_rc_factor = 2.4;
% ugh
notewidth = (\quartwidth + \wholewidth) / 2.0;
%{ Ross. page 151 lists these values, but we think that thick lines
and kernings are too thick.
-bar_kern = 0.5 * \interline;
-bar_thinkern = 0.75 * \interline;
-barthick_thick = 0.5* \interline;
-barthick_score = 0.13333* \interline;
-barthick_thin = 0.1*\interline;
+bar_kern = 0.5 * \staffspace;
+bar_thinkern = 0.75 * \staffspace;
+barthick_thick = 0.5* \staffspace;
+barthick_score = 0.13333* \staffspace;
+barthick_thin = 0.1*\staffspace;
%}
barthick_thin = 1.6*\stafflinethickness;
barthick_score = 1.6*\stafflinethickness;
-bracket_arch_thick = \interline / 3.0;
-bracket_width = 2.0 * \interline;
+bracket_arch_thick = \staffspace / 3.0;
+bracket_width = 2.0 * \staffspace;
bracket_thick = 2.0 * \stafflinethickness;
-bracket_arch_height = 1.5 * \interline;
+bracket_arch_height = 1.5 * \staffspace;
bracket_arch_width = \bracket_arch_height;
bracket_arch_angle = 50.0;
-tuplet_spanner_gap = 2.0 * \interline;
+tuplet_spanner_gap = 2.0 * \staffspace;
tuplet_thick = 1.0*\stafflinethickness;
volta_thick = 1.6*\stafflinethickness;
-volta_spanner_height = 2.0 *\interline;
+volta_spanner_height = 2.0 *\staffspace;
% relative thickness of thin lines 1.6 : 1 : 0.8
stemthickness = 0.8*\stafflinethickness;
% Multi-measure rests
multi_measure_rest_x_minimum = 2.5*\staffheight;
-multi_measure_rest_padding = 2.0 *\interline;
+multi_measure_rest_padding = 2.0 *\staffspace;
multi_measure_rest_expand_limit = 10.0;
% chop off this much when next to pp / ff sign.
-crescendo_shorten = 4.0 * \interline;
+crescendo_shorten = 4.0 * \staffspace;
crescendo_thickness = \stafflinethickness;
-crescendo_height = 0.666 * \interline;
+crescendo_height = 0.666 * \staffspace;
+crescendo_dash_thickness = 1.2*\stafflinethickness;
+crescendo_dash = 4.0*\staffspace;
% in internote.
restcollision_minimum_dist = 3.0;
postBreakPadding = 0.0;
% optical correction amount.
-stemSpacingCorrection = 0.5*\interline;
+stemSpacingCorrection = 0.5*\staffspace;
%{
%{
If columns do not have spacing information set, set it to this much
%}
-loose_column_distance = 2.0 * \interline;
+loose_column_distance = 2.0 * \staffspace;
%{
Relative cost of compressing (vs. stretching). Increasing this
% if stem is on middle line, choose this direction.
stem_default_neutral_direction = 1.0;
-% in interline
+% in staffspace
articulation_script_padding_default = 1.0;
% Backward compatibility -- has no function;
#'Local_key_item::left-padding = #'0.2
#'Local_key_item::right-padding = #'0.4
-#'Staff_symbol::staff-space = \interline ;
+#'Staff_symbol::staff-space = \staffspace ;
#'Staff_symbol::line-count = #5