% thickness of stafflines
staffline = \interline / 10.0;
+% urg, need grace_ versions of these too?
beam_thickness = 0.52 * (\interline - \staffline);
-interbeam = (2.0 * \interline - \beam_thickness) / 2.0;
+interbeam = (2.0 * \interline + \staffline - \beam_thickness) / 2.0;
interbeam4 = (3.0 * \interline - \beam_thickness) / 3.0;
% stems and beams
%
% poor man's array size
stem_max = 3.0;
+
+% stem stuff measured in staff positions.
+stem_length0 = 7.;
+stem_length1 = 5.;
+stem_length2 = 4.;
+stem_length3 = 3.;
+
%
-stem_length0 = 3.5*\interline;
-stem_length1 = 2.5 * \interline;
-stem_length2 = 2.0 * \interline;
-stem_length3 = 1.5 * \interline;
+arithmetic_basicspace = 2.;
+arithmetic_multiplier = 0.9 * \quartwidth ;
+
+
+
+% urg.
+% if only these ugly arrays were scm,
+% we could override them in the Grace context
+grace_factor = 0.8;
+grace_stem_length0 = \stem_length0 * \grace_factor;
+grace_stem_length1 = \stem_length1 * \grace_factor;
+grace_stem_length2 = \stem_length2 * \grace_factor;
+grace_stem_length3 = \stem_length3 * \grace_factor;
% only used for beams
-minimum_stem_length0 = 0.0; % not used
-minimum_stem_length1 = 1.5 * \interline;
-minimum_stem_length2 = 1.25 * \interline;
-minimum_stem_length3 = 1.0 * \interline;
+minimum_stem_length0 = 0.0 ; % not used
+minimum_stem_length1 = 3. ;
+minimum_stem_length2 = 2.5;
+minimum_stem_length3 = 2.0;
+
+grace_minimum_stem_length0 = 0.0 ; % not used
+grace_minimum_stem_length1 = \minimum_stem_length1 * \grace_factor;
+grace_minimum_stem_length2 = \minimum_stem_length2 * \grace_factor;
+grace_minimum_stem_length3 = \minimum_stem_length3 * \grace_factor;
% stems in unnatural (forced) direction should be shortened,
% according to [Roush & Gourlay]. Their suggestion to knock off
% a whole staffspace seems a bit drastical: we'll do half.
%
-forced_stem_shorten0 = 0.5 * \interline;
+forced_stem_shorten0 = 1.0;
forced_stem_shorten1 = \forced_stem_shorten0;
forced_stem_shorten2 = \forced_stem_shorten1;
forced_stem_shorten3 = \forced_stem_shorten2;
+% don't shorten grace stems, always up
+grace_forced_stem_shorten0 = 0.;
+grace_forced_stem_shorten1 = \grace_forced_stem_shorten0;
+grace_forced_stem_shorten2 = \grace_forced_stem_shorten1;
+grace_forced_stem_shorten3 = \grace_forced_stem_shorten2;
+
% there are several ways to calculate the direction of a beam
%
% * MAJORITY : number count of up or down notes
% OSU: suggested gap = ss / 5;
slur_x_gap = \interline / 5.0;
+slur_y_gap = 0.25 * \interline;
+slur_y_free = 0.75 * \interline;
slur_x_minimum = 3.0 * \interline;
% slope damping: keep dy/dx < slur_slope_damping
-slur_slope_damping = 0.6;
+slur_slope_damping = 0.3;
+slur_interstaff_slope_damping = 0.6;
+% height damping: keep h/dx < slur_height_damping
+slur_height_damping = 0.4;
+slur_interstaff_height_damping = 0.5;
+% snap to stem if slur ends closer to stem than
+slur_snap_to_stem = 1.75 * \interline;
+slur_interstaff_snap_to_stem = 2.5 * \interline;
+% maximum dy change allowed by snapping
+slur_snap_max_slope_change = 0.5;
+slur_interstaff_snap_max_slope_change = 0.5;
+
-% dy_slur := dy_music * factor
-slur_slope_follow_music_factor = 0.8;
tie_x_minimum = \slur_x_minimum;
+% OSU: tie gap == slur gap
tie_x_gap = \slur_x_gap;
-tie_slope_damping = 0.8;
+tie_y_gap = 0.25 * \interline;
+% length of a tie that's a staffspace high
+tie_staffspace_length = 4.0 * \interline;
% ugh: rename to bow (in bezier.cc and fonts.doc too...)
% slur_thickness = 1.8 * \staffline;
slur_thickness = 1.4 * \staffline;
slur_height_limit = \staffheight;
+
+
% slur_ratio = 0.3;
% try bit flatter slurs
slur_ratio = 0.25;
notewidth = (\quartwidth + \wholewidth) / 2.0;
% ugh
-barsize = \staffheight;
rulethickness = \staffline;
-% stem should be thinner?
-stemthickness = \staffline;
-
-
gourlay_energybound = 100000.;
%{
The following bounds the number of measures
gourlay_maxmeasures = 10.;
castingalgorithm = \Gourlay;
-%{
-Ross. page 151
+%{ Ross. page 151 lists these values, but we think that thick lines
+and kernings are too thick.
bar_kern = 0.5 * \interline;
bar_thinkern = 0.75 * \interline;
barthick_thick = 0.5* \interline;
+barthick_score = 0.13333* \interline;
barthick_thin = 0.1*\interline;
-Can't be, these are ugly! Changed to old (TeX) values.
-
-% barline should be thicker!
%}
bar_thinkern = 3.0 * \staffline;
barthick_thick = 6.0* \staffline;
barthick_thin = 1.6*\staffline;
+barthick_score = 1.6*\staffline;
+tuplet_spanner_gap = 2.0 * \interline;
tuplet_thick = 1.0*\staffline;
volta_thick = 1.6*\staffline;
+volta_spanner_height = 2.0 *\interline;
+
+% relative thickness of thin lines 1.6 : 1 : 0.8
+stemthickness = 0.8*\staffline;
+rulethickness = \staffline;
+
extender_height = 0.8*\staffline;
+hyphen_thickness = 0.05*\font_normal;
+hyphen_height = 0.2*\font_normal;
+hyphen_minimum_length = 0.25*\font_normal;
+
+% Multi-measure rests
+mmrest_x_minimum = 2.0*\staffheight;
+
+
+% chop off this much when next to pp / ff sign.
+crescendo_shorten = 4.0 * \interline;
+crescendo_thickness = \staffline;
+
+% in internote.
+restcollision_minimum_dist = 3.0;
+restcollision_minimum_beamdist = 1.5;
+
+% deprecated!
+postBreakPadding = 0.0;
+
+% optical correction amount.
+stemSpacingCorrection = 0.5*\interline;
+
+
+% relative strength of space following tprefatory matter, and inline clefs.
+non_musical_space_strength = 8.0;
+
+
+%If columns do not have spacing information set, set it to this much
+loose_column_distance = 2.0 * \interline;
+
+% if stem is on middle line, choose this direction.
+stem_default_neutral_direction = 1.0;
\include "engraver.ly";
+
projects / lilypond.git / blobdiff