;;; lilypond-indent.el --- Auto-indentation for lilypond code
;;;
;;; Heikki Junes <hjunes@cc.hut.fi>
-;;; show-paren-function was taken and then modified from FSF Emacs paren.el
+;;; * introduce Lilypond-show-paren-function for Emacs and
+;;; Lilypond-paren-highlight for XEmacs
+;;; * match two-char slurs '\( ... \)' and '\[ ... \]' separately.
+;;; * adopt Emacs' f90-comment-region
;;; Chris Jackson <chris@fluffhouse.org.uk>
;;; some code is taken from ESS (Emacs Speaks Statistics) S-mode by A.J.Rossini <rossini@biostat.washington.edu>
;;; Variables for customising indentation style
;;; TODO:
-;;; * emulate show-paren-mode, i.e., highlight the matching bracket if
-;;; - the cursor is on the matching opening bracket
-;;; - the cursor is after the matching closing bracket
-;;; * separate '('- and ')'-slurs from '\('- and '\)'-slurs.
-;;; * separate '['- and ']'-slurs from '\['- and '\]'-slurs.
-;;; * currently, brackets may need a non-bracket char between ( ( ) )
+;;; * currently, in bracket matching one may need a non-bracket
+;;; chararacter between the bracket characters, like ( ( ) )
+;;; * in syntax-highlighting slurs are not always highlighted the right way
+;;; e.g. opening slurs are found found better in "#( ( ) ( ) )" than
+;;; opening slurs
+;;; * Mouse double-clicks should use LilyPond-scan-sexps for slur matching.
(defcustom LilyPond-indent-level 4
"*Indentation of lilypond statements with respect to containing block.")
Compares with other text in same context.")
(defcustom LilyPond-angle-offset 0
- "*Extra indentation for open angled brackets .
+ "*Extra indentation for open angled brackets.
Compares with other text in same context.")
(defcustom LilyPond-square-offset 0
- "*Extra indentation for open square brackets .
+ "*Extra indentation for open square brackets.
Compares with other text in same context.")
(defcustom LilyPond-scheme-paren-offset 0
- "*Extra indentation for open scheme parens .
+ "*Extra indentation for open scheme parens.
Compares with other text in same context.")
(defcustom LilyPond-close-brace-offset 0
(defcustom LilyPond-fancy-comments t
"*Non-nil means distiguish between %, %%, and %%% for indentation.")
+(defcustom LilyPond-comment-region "%%$"
+ "*String inserted by \\[LilyPond-comment-region]\
+ at start of each line in region.")
+
+(defun LilyPond-comment-region (beg-region end-region)
+ "Comment/uncomment every line in the region.
+Insert LilyPond-comment-region at the beginning of every line in the region
+or, if already present, remove it."
+ (interactive "*r")
+ (let ((end (make-marker)))
+ (set-marker end end-region)
+ (goto-char beg-region)
+ (beginning-of-line)
+ (if (looking-at (regexp-quote LilyPond-comment-region))
+ (delete-region (point) (match-end 0))
+ (insert LilyPond-comment-region))
+ (while (and (zerop (forward-line 1))
+ (< (point) (marker-position end)))
+ (if (looking-at (regexp-quote LilyPond-comment-region))
+ (delete-region (point) (match-end 0))
+ (insert LilyPond-comment-region)))
+ (set-marker end nil)))
(defun LilyPond-calculate-indent ()
"Return appropriate indentation for current line as lilypond code.
(let ((indent-point (point))
(case-fold-search nil)
state)
- (setq containing-sexp (save-excursion (LilyPond-beginning-of-containing-sexp)))
+ (setq containing-sexp (save-excursion (LilyPond-scan-containing-sexp)))
(beginning-of-defun)
(while (< (point) indent-point)
(setq state (parse-partial-sexp (point) indent-point 0)))
(current-indentation)))))))))
-
(defun LilyPond-indent-line ()
"Indent current line as lilypond code.
Return the amount the indentation changed by."
;; () are treated specially (need to indent in Scheme but not in music)
(defconst LilyPond-parens-regexp-alist
- `( ( ?> . ("\\([^\\]\\|^\\)<" . "[^ \\n\\t_^-]\\s-*>\\|[_^-]\\s-*[-^]\\s-*>"))
+ `( ( ?> . ("\\([^\\]\\|^\\)<" . "\\([^ \\n\\t_^-]\\|[_^-][-^]\\|\\s-\\)\\s-*>"))
;; a b c->, a b c^> and a b c_> are not close-angle-brackets, they're accents
;; but a b c^-> and a b c^^> are close brackets with tenuto/marcato before them
;; also \> and \< are hairpins
+ ;; duh .. a single '>', as in chords '<< ... >>', was not matched here
( ?} . ("{" . "}"))
;; ligatures '\[ ... \]' are skipped in the following expression
( ?] . ("\\([^\\]\\([\\][\\]\\)*\\|^\\)[[]" . "\\([^\\]\\([\\][\\]\\)*\\|^\\)[]]"))
nil))
-(defun LilyPond-beginning-of-containing-sexp (&optional bracket-type slur-paren-p)
+(defun LilyPond-scan-containing-sexp (&optional bracket-type slur-paren-p dir)
"Move point to the beginning of the deepest parenthesis pair enclosing point.
If the optional argument bracket-type, a character representing a
"
;;; An user does not call this function directly, or by a key sequence.
;; (interactive)
- (let ( (level 1)
+ (let ( (level (if (not (eq dir 1)) 1 -1))
(regexp-alist LilyPond-parens-regexp-alist)
- (oldpos (point) ) )
+ (oldpos (point))
+ (assoc-bracket-type (if (not (eq dir 1)) bracket-type (LilyPond-matching-paren bracket-type))))
+
(if (LilyPond-inside-scheme-p)
(setq paren-regexp "(\\|)")
(if slur-paren-p
;; expressional slurs '\( ... \)' are not taken into account
(setq regexp-alist (cons '( ?\) . ("\\([^\\]\\([\\][\\]\\)*\\|^\\)(" . "\\([^\\]\\([\\][\\]\\)*\\|^\\))")) regexp-alist)))
- (if (member bracket-type (mapcar 'car regexp-alist))
- (progn (setq paren-regexp (cdr (assoc bracket-type regexp-alist)))
+ (if (member assoc-bracket-type (mapcar 'car regexp-alist))
+ (progn (setq paren-regexp (cdr (assoc assoc-bracket-type regexp-alist)))
(setq paren-regexp (concat (car paren-regexp) "\\|" (cdr paren-regexp))))
(setq paren-regexp (concat (mapconcat 'car (mapcar 'cdr regexp-alist) "\\|") "\\|"
(mapconcat 'cdr (mapcar 'cdr regexp-alist) "\\|")))))
- (while (and (> level 0)
- (re-search-backward paren-regexp nil t)
+ ;; match concurrent one-char opening and closing slurs
+ (if (and (eq dir 1)
+ (not (sequencep bracket-type))
+ (eq (char-syntax (char-after oldpos)) ?\()
+ (not (eq (char-after oldpos) ?<)))
+ ;; anyway do not count open slur, since already level = -1
+ (progn (forward-char 1)
+ (if (eq (following-char)
+ (LilyPond-matching-paren (char-after oldpos)))
+ ;; matching char found, go after it and set level = 0
+ (progn (forward-char 1)
+ (setq level 0)))))
+ ;; browse the code until matching slur is found, or report mismatch
+ (while (and (if (not (eq dir 1))
+ (> level 0)
+ (< level 0))
+ ;; dir tells whether to search backward or forward
+ (if (not (eq dir 1))
+ (re-search-backward paren-regexp nil t)
+ (re-search-forward paren-regexp nil t))
+ ;; note: in case of two-char bracket only latter is compared
(setq match (char-before (match-end 0))))
- (if (not (save-excursion (goto-char (match-end 0))
+;;; (message "%d" level) (sit-for 0 300)
+ (if (not (save-excursion (goto-char (match-end 0))
+ ;; skip over strings and comments
(LilyPond-inside-string-or-comment-p)))
(if (memq match '(?} ?> ?] ?\)))
+ ;; count closing brackets
(progn (setq level (1+ level))
+ ;; slurs may be close to each other, e.g.,
+ ;; a single '>' was not matched .. need to be corrected
+ (if (and (eq dir 1) (eq (char-after (match-end 0)) match))
+ (if (/= level 0)
+ (progn
+ (setq level (1+ level))
+ (forward-char 1))))
+;;; (message "%d %c" level match) (sit-for 0 300)
+ ;; hmm..
(if (and (= match ?>)
(looking-at ".\\s-+>\\|\\({\\|}\\|<\\|>\\|(\\|)\\|[][]\\)>"))
(forward-char 1)))
+ ;; count opening brackets
(progn (setq level (1- level))
+;;; (message "%d %c" level match) (sit-for 0 300)
+ ;; hmm..
(if (and (= match ?<)
(looking-at ".\\s-+<\\|\\({\\|}\\|<\\|>\\|(\\|)\\|[][]\\)<"))
(forward-char 1))))))
;; jump to the matching slur
- (if (sequencep bracket-type)
- (if (looking-at "..[][)(]") (forward-char 1)))
- (if (looking-at ".[][><)(]") (forward-char 1))
+ (if (not (eq dir 1))
+ (progn
+ (if (sequencep bracket-type)
+ ;; match the latter char in two-char brackets
+ (if (looking-at "..[][)(]") (forward-char 1)))
+ ;; if the following char is not already a slur
+ (if (and (not (looking-at "[)(]"))
+ ;; match the slur which follows
+ (looking-at ".[][><)(]")) (forward-char 1)))
+ (backward-char 1))
(if (= level 0)
(point)
(progn (goto-char oldpos)
;;; Largely taken from the 'blink-matching-open' in lisp/simple.el in
;;; the Emacs distribution.
-(defun LilyPond-blink-matching-open ()
+(defun LilyPond-blink-matching-paren (&optional dir)
"Move cursor momentarily to the beginning of the sexp before
point. In lilypond files this is used for closing ), ], } and >, whereas the
builtin 'blink-matching-open' is not used. In syntax table, see
(let ( (oldpos (point))
(level 0)
(mismatch) )
- ;; Test if a ligature \] or expressional slur \) was encountered
- (if (not (equal this-command 'LilyPond-electric-close-paren))
+ (if (not (or (equal this-command 'LilyPond-electric-close-paren)
+ (eq dir 1)))
(goto-char (setq oldpos (- oldpos 1))))
+ ;; Test if a ligature \] or expressional slur \) was encountered
(setq bracket-type (char-after (point)))
(setq char-before-bracket-type nil)
- (if (memq bracket-type '(?] ?\)))
+ (if (memq bracket-type '(?] ?\) ?[ ?\())
(progn
(setq np -1)
(while (eq (char-before (- (point) (setq np (+ np 1)))) ?\\)
(setq char-before-bracket-type (if char-before-bracket-type nil ?\\)))
(if (eq char-before-bracket-type ?\\)
(setq bracket-type (string char-before-bracket-type bracket-type)))))
- (save-restriction
- (if blink-matching-paren-distance
- (narrow-to-region (max (point-min)
- (- (point) blink-matching-paren-distance))
- oldpos)))
- (if (memq bracket-type '(?> ?}))
+ (when blink-matching-paren-distance
+ (narrow-to-region
+ (max (point-min) (- (point) blink-matching-paren-distance))
+ (min (point-max) (+ (point) blink-matching-paren-distance))))
+ (if (and (equal this-command 'LilyPond-electric-close-paren)
+ (memq bracket-type '(?> ?} ?< ?{)))
;; < { need to be mutually balanced and nested, so search backwards for both of these bracket types
- (LilyPond-beginning-of-containing-sexp nil nil)
+ (LilyPond-scan-containing-sexp nil nil dir)
;; whereas ( ) slurs within music don't, so only need to search for ( )
;; use same mechanism for [ ] slurs
- (LilyPond-beginning-of-containing-sexp bracket-type t))
+ (LilyPond-scan-containing-sexp bracket-type t dir))
(setq blinkpos (point))
(setq mismatch
(or (null (LilyPond-matching-paren (char-after blinkpos)))
(if (not (equal this-command 'LilyPond-electric-close-paren))
(goto-char (setq oldpos (+ oldpos 1)))
(goto-char oldpos))
- blinkpos))
+ (if (not (eq dir 1))
+ blinkpos
+ (+ blinkpos 1))))
(defun LilyPond-electric-close-paren ()
(interactive)
(let ((oldpos (point)))
(self-insert-command 1)
- (if (and blink-matching-paren
- (not (LilyPond-inside-string-or-comment-p))
- (save-excursion (re-search-backward
- (concat (mapconcat 'cdr (mapcar 'cdr LilyPond-parens-regexp-alist) "\\|") "\\|)") nil t)
- (eq oldpos (1- (match-end 0)))))
- (progn (backward-char 1)
- (LilyPond-blink-matching-open)
- (forward-char 1)))))
-
-;; Find the place to show, if there is one,
-;; and show it until input arrives.
-(defun LilyPond-show-paren-function ()
- (if show-paren-mode
- (let (pos (dir 0) mismatch face (oldpos (point)))
- (cond ((memq (preceding-char) '(?\) ?\] ?} ?>))
- (setq dir -1))
- ((memq (following-char) '(?\( ?\[ ?{ ?<))
- (setq dir 1)))
- ;;
- ;; Find the other end of the sexp.
- ;;
- ;; try first only one direction
- (when (and (= dir -1)
- (not (LilyPond-inside-string-or-comment-p)))
-; (when dir
- (save-excursion
- (save-restriction
- ;; Determine the range within which to look for a match.
- (when blink-matching-paren-distance
- (narrow-to-region
- (max (point-min) (- (point) blink-matching-paren-distance))
- (min (point-max) (+ (point) blink-matching-paren-distance))))
- ;; Scan across one sexp within that range.
- ;; Errors or nil mean there is a mismatch.
- ;;; NOTE: HERE IT IS VERY MUCH WRONG
- ;;; ONE CANNOT USE scan-sexps BECAUSE
- ;;; BRACKETS ARE NOT IN THE SYNTAX TABLE.
- ;;; HENCE BY REPLACING THE FOLLOWING IT WILL WORK.
- (condition-case ()
- (setq pos (LilyPond-blink-matching-open))
- (error (setq pos t mismatch t)))
- ;; If found a "matching" paren, see if it is the right
- ;; kind of paren to match the one we started at.
- (when (integerp pos)
- (let ((beg (min pos oldpos)) (end (max pos oldpos)))
- (when (/= (char-after beg) ?\$)
- (setq mismatch
- (not (eq (char-before end)
- ;; This can give nil.
- (LilyPond-matching-paren (char-after beg)))))))))))
- ;;
- ;; Highlight the other end of the sexp, or unhighlight if none.
- (if (not pos)
- (progn
- ;; If not at a paren that has a match,
- ;; turn off any previous paren highlighting.
- (and show-paren-overlay (overlay-buffer show-paren-overlay)
- (delete-overlay show-paren-overlay))
- (and show-paren-overlay-1 (overlay-buffer show-paren-overlay-1)
- (delete-overlay show-paren-overlay-1)))
- ;;
- ;; Use the correct face.
- (if mismatch
- (progn
- (if show-paren-ring-bell-on-mismatch
- (beep))
- (setq face 'show-paren-mismatch-face))
- (setq face 'show-paren-match-face))
- ;;
- ;; If matching backwards, highlight the closeparen
- ;; before point as well as its matching open.
- ;; If matching forward, and the openparen is unbalanced,
- ;; highlight the paren at point to indicate misbalance.
- ;; Otherwise, turn off any such highlighting.
- (if (and (= dir 1) (integerp pos))
- (when (and show-paren-overlay-1
- (overlay-buffer show-paren-overlay-1))
- (delete-overlay show-paren-overlay-1))
- (let ((from (if (= dir 1)
- (point)
- (forward-point -1)))
- (to (if (= dir 1)
- (forward-point 1)
- (point))))
- (if show-paren-overlay-1
- (move-overlay show-paren-overlay-1 from to (current-buffer))
- (setq show-paren-overlay-1 (make-overlay from to)))
- ;; Always set the overlay face, since it varies.
- (overlay-put show-paren-overlay-1 'priority show-paren-priority)
- (overlay-put show-paren-overlay-1 'face face)))
- ;;
- ;; Turn on highlighting for the matching paren, if found.
- ;; If it's an unmatched paren, turn off any such highlighting.
- (unless (integerp pos)
- (delete-overlay show-paren-overlay))
- (let ((to (if (or (eq show-paren-style 'expression)
- (and (eq show-paren-style 'mixed)
- (not (pos-visible-in-window-p pos))))
- (point)
- pos))
- (from (if (or (eq show-paren-style 'expression)
- (and (eq show-paren-style 'mixed)
- (not (pos-visible-in-window-p pos))))
- pos
- (save-excursion
- (goto-char pos)
- (forward-point (- dir))))))
- (if show-paren-overlay
- (move-overlay show-paren-overlay from to (current-buffer))
- (setq show-paren-overlay (make-overlay from to))))
- ;;
- ;; Always set the overlay face, since it varies.
- (overlay-put show-paren-overlay 'priority show-paren-priority)
- (overlay-put show-paren-overlay 'face face)))
- ;; show-paren-mode is nil in this buffer.
- (and show-paren-overlay
- (delete-overlay show-paren-overlay))
- (and show-paren-overlay-1
- (delete-overlay show-paren-overlay-1))))
-
-;; Comment the following line to disable show-paren-function
-;; Currently, works only in Emacs, should tune for XEmacs
-(defun show-paren-function () (LilyPond-show-paren-function))
+ ;; Refontify buffer if a block-comment-ender '%}' is inserted
+ (if (and (eq (char-before (point)) ?})
+ (eq (char-before (- (point) 1)) ?%))
+ (font-lock-fontify-buffer)
+ ;; Match paren if the cursor is not inside string or comment.
+ (if (and blink-matching-paren
+ (not (LilyPond-inside-string-or-comment-p))
+ (save-excursion (re-search-backward
+ (concat (mapconcat 'cdr (mapcar 'cdr LilyPond-parens-regexp-alist) "\\|") "\\|)") nil t)
+ (eq oldpos (1- (match-end 0)))))
+ (progn (backward-char 1)
+ (LilyPond-blink-matching-paren)
+ (forward-char 1))))))
+
+(defun LilyPond-scan-sexps (pos dir)
+ "This function is redefined to be used in Emacs' show-paren-function and
+in XEmacs' paren-highlight."
+ (LilyPond-blink-matching-paren dir))