#include "paper-def.hh"
#include "tie.hh"
#include "note-head.hh"
-#include "p-col.hh"
+#include "paper-column.hh"
#include "debug.hh"
{
head_l_drul_[RIGHT] =0;
head_l_drul_[LEFT] =0;
- same_pitch_b_ =false;
}
ugh: direction of the Tie is more complicated. See [Ross] p136 and further
*/
Direction
-Tie::get_default_dir() const
+Tie::get_default_dir () const
{
- int m= (head_l_drul_[LEFT]->position_i_
- + head_l_drul_[RIGHT]->position_i_) /2;
- return(m < 0)? DOWN : UP;
+ int m = (head_l_drul_[LEFT]->position_i ()
+ + head_l_drul_[RIGHT]->position_i ()) /2;
+
+ /*
+ If dir is not determined: inverse of stem: down
+ (see stem::get_default_dir ())
+ */
+ Direction neutral_dir = (Direction)(int)paper_l ()->get_var ("stem_default_neutral_direction");
+ return (m == 0) ? other_dir (neutral_dir) : (m < 0) ? DOWN : UP;
}
void
void
Tie::do_post_processing()
{
- // URG: share code with slur!
assert (head_l_drul_[LEFT] || head_l_drul_[RIGHT]);
- // URG
- Real notewidth = paper_l ()->note_width () * 0.8;
Real interline_f = paper_l ()->get_realvar (interline_scm_sym);
+ Real internote_f = interline_f / 2;
+ Real x_gap_f = paper_l ()->get_var ("tie_x_gap");
+ Real y_gap_f = paper_l ()->get_var ("tie_y_gap");
/*
- [OSU]: slur and tie placement
+ Slur and tie placement [OSU]
- ties:
- * x = inner raakpunt - d * gap
+ Ties:
+
+ * x = inner vertical tangent - d * gap
- * y = length < 5ss : horizontal raakpunt
- y = length >= 5ss : y next interline - d * 0.25 ss
- --> height <= 5 length ?? we use <= 3 length, now...
*/
- Real gap_f = paper_l ()->get_var ("slur_x_gap");
+ /*
+ OSU: not different for outer notes, so why all this code?
+ ie, can we drop this, or should it be made switchable.
+ */
+#if 0
Direction d = LEFT;
do
{
- dy_f_drul_[d] = .5 * interline_f * (head_l_drul_[d]
- ? head_l_drul_[d]->position_i_
- : head_l_drul_[(Direction)-d]->position_i_);
- }
- while (flip(&d) != LEFT);
-
- do
- {
- // tie attached to outer notehead
+ Real head_width_f = head_l_drul_[d]
+ ? head_l_drul_[d]->extent (X_AXIS).length ()
+ : 0;
+ /*
+ side attached to outer (upper or lower) notehead of chord
+ */
if (head_l_drul_[d]
- && head_l_drul_[d]->remove_elt_property (extremal_scm_sym) != SCM_BOOL_F)
- {
- if (d == LEFT)
- dx_f_drul_[d] += notewidth;
- dx_f_drul_[d] += -d * gap_f;
- /* attach to outer 3/4 end of head */
- dy_f_drul_[d] += dir_ * 0.25 * interline_f;
- }
- // tie attached to inner notehead
- else if (head_l_drul_[d] && d == LEFT)
+ /*
+ && head_l_drul_[d]->remove_elt_property (extremal_scm_sym) != SCM_BOOL_F)
+ ugh, ugh:
+
+ a~a~a;
+
+ to second tie, middle notehead seems not extremal
+
+ Getting scared a bit by score-element's comment:
+ // is this a good idea?
+ */
+ && (head_l_drul_[d]->get_elt_property (extremal_scm_sym)
+ != SCM_BOOL_F))
{
- dx_f_drul_[d] += -d * notewidth;
+ if (d == LEFT)
+ dx_f_drul_[d] += head_width_f;
+ dx_f_drul_[d] += -d * x_gap_f;
}
- // uhm? loose end of tie // tie attached to stem
+ /*
+ side attached to inner notehead
+ */
else
{
- dx_f_drul_[d] = -d * (spanned_drul_[d]->extent (X_AXIS).length ()
- -0.5 * notewidth);
+ dx_f_drul_[d] += -d * head_width_f;
}
- }
- while (flip(&d) != LEFT);
+ } while (flip (&d) != LEFT);
- // now that both are set, do dependent
- do
- {
- // tie attached to outer notehead
- if (!head_l_drul_[d])
- {
- dy_f_drul_[d] = dy_f_drul_[(Direction) -d];
- }
- }
- while (flip(&d) != LEFT);
+#else
- /*
- Avoid too steep ties
- * slur from notehead to stemend: c''()b''
+ if (head_l_drul_[LEFT])
+ dx_f_drul_[LEFT] = head_l_drul_[LEFT]->extent (X_AXIS).length ();
+ else
+ dx_f_drul_[LEFT] = spanned_drul_[LEFT]->extent (X_AXIS).length ();
+ dx_f_drul_[LEFT] += x_gap_f;
+ dx_f_drul_[RIGHT] -= x_gap_f;
+
+#endif
+
+ /*
+ Slur and tie placement [OSU] -- check this
+
+ Ties:
+
+ * y = dx < 5ss: horizontal tangent
+ y = dx >= 5ss: y next interline - d * 0.25 ss
+
+ which probably means that OSU assumes that
+
+ dy <= 5 dx
+
+ for smal slurs
*/
- Real damp_f = paper_l ()->get_var ("tie_slope_damping");
- Offset d_off = Offset (dx_f_drul_[RIGHT] - dx_f_drul_[LEFT],
- dy_f_drul_[RIGHT] - dy_f_drul_[LEFT]);
- d_off.x () += extent (X_AXIS).length ();
-
- Real ratio_f = abs (d_off.y () / d_off.x ());
- if (ratio_f > damp_f)
- dy_f_drul_[(Direction)(- dir_ * sign (d_off.y ()))] +=
- dir_ * (ratio_f - damp_f) * d_off.x ();
+
+ int ypos_i = head_l_drul_[LEFT] ? head_l_drul_[LEFT]->position_i ()
+ : head_l_drul_[RIGHT]->position_i ();
+
+ Real y_f = internote_f * ypos_i;
+
+ Real dx_f = extent (X_AXIS).length () + dx_f_drul_[RIGHT] - dx_f_drul_[LEFT];
+ if (dx_f < paper_l ()->get_var ("tie_staffspace_length"))
+ {
+ if (abs (ypos_i) % 2)
+ y_f += dir_ * internote_f;
+ y_f += dir_ * y_gap_f;
+ }
+ else
+ {
+ if (! (abs (ypos_i) % 2))
+ y_f += dir_ * internote_f;
+ y_f += dir_ * internote_f;
+ y_f -= dir_ * y_gap_f;
+ }
+
+ dy_f_drul_[LEFT] = dy_f_drul_[RIGHT] = y_f;
}
void
Tie::do_substitute_element_pointer (Score_element*o, Score_element*n)
{
- Note_head *new_l =n?dynamic_cast<Note_head *> (n):0;
+ Note_head *new_l = n ? dynamic_cast<Note_head *> (n) : 0;
if (dynamic_cast <Item *> (o) == head_l_drul_[LEFT])
head_l_drul_[LEFT] = new_l;
else if (dynamic_cast <Item *> (o) == head_l_drul_[RIGHT])
projects / lilypond.git / blobdiff