c4 \staffchange c4
do we have non-horizontal ties then?
- */
-
+*/
void
-Tie::set_head (Grob*me, Direction d, Grob * h)
+Tie::set_head (Grob *me, Direction d, Grob *h)
{
assert (!head (me, d));
index_set_cell (me->get_property ("head-pair"), d, h->self_scm ());
-
- dynamic_cast<Spanner*> (me)->set_bound (d, h);
+
+ dynamic_cast<Spanner *> (me)->set_bound (d, h);
me->add_dependency (h);
}
void
-Tie::set_interface (Grob*me)
+Tie::set_interface (Grob *me)
{
me->set_property ("head-pair", scm_cons (SCM_EOL, SCM_EOL));
}
-
-Grob*
-Tie::head (Grob*me, Direction d)
+Grob *
+Tie::head (Grob *me, Direction d)
{
SCM c = me->get_property ("head-pair");
int
Tie::get_column_rank (Grob *me, Direction d)
{
- Spanner *span = dynamic_cast<Spanner*> (me);
- Grob * h = head (me, d);
+ Spanner *span = dynamic_cast<Spanner *> (me);
+ Grob *h = head (me, d);
if (!h)
h = span->get_bound (d);
- Grob *col = dynamic_cast<Item*> (h)->get_column ();
+ Grob *col = dynamic_cast<Item *> (h)->get_column ();
return Paper_column::get_rank (col);
}
Real
-Tie::get_position (Grob*me)
+Tie::get_position (Grob *me)
{
Direction d = head (me, LEFT) ? LEFT:RIGHT;
return Staff_symbol_referencer::get_position (head (me, d));
}
-
/*
Default: Put the tie oppositie of the stem [Wanske p231]
In case of chords: Tie_column takes over
-
+
The direction of the Tie is more complicated (See [Ross] p136 and
further).
- (what about linebreaks? )
-
+ (what about linebreaks? )
*/
Direction
-Tie::get_default_dir (Grob*me)
+Tie::get_default_dir (Grob *me)
{
- Item * sl = head (me, LEFT) ? Rhythmic_head::get_stem (head (me, LEFT)) :0;
- Item * sr = head (me, RIGHT) ? Rhythmic_head::get_stem (head (me, RIGHT)) :0;
+ Item *sl = head (me, LEFT) ? Rhythmic_head::get_stem (head (me, LEFT)) :0;
+ Item *sr = head (me, RIGHT) ? Rhythmic_head::get_stem (head (me, RIGHT)) :0;
if (sl && sr)
{
if (get_grob_direction (sl) == UP
else if (sl || sr)
{
Item *s = sl ? sl : sr;
- return - get_grob_direction (s);
+ return -get_grob_direction (s);
}
-
return UP;
}
-
void
-Tie::set_direction (Grob*me)
+Tie::set_direction (Grob *me)
{
if (!get_grob_direction (me))
{
/*
TODO: we should also use thickness for computing the clearance
between head and tie. Very thick ties will now touch the note head.
-
- */
+*/
SCM
Tie::get_control_points (SCM smob)
-{
- Spanner*me = unsmob_spanner (smob);
- Direction headdir = CENTER;
+{
+ Spanner *me = unsmob_spanner (smob);
+ Direction headdir = CENTER;
if (head (me, LEFT))
headdir = LEFT;
else if (head (me, RIGHT))
set_direction (me);
Direction dir = get_grob_direction (me);
-
+
Real staff_space = Staff_symbol_referencer::staff_space (me);
Real x_gap_f = robust_scm2double (me->get_property ("x-gap"), 0);
- Grob* l = me->get_bound (LEFT);
- Grob* r = me->get_bound (RIGHT);
+ Grob *l = me->get_bound (LEFT);
+ Grob *r = me->get_bound (RIGHT);
- Grob* commonx = me->common_refpoint (l, X_AXIS);
+ Grob *commonx = me->common_refpoint (l, X_AXIS);
commonx = me->common_refpoint (r, X_AXIS);
-
+
Real left_x;
/*
- the tie has to be long enough to be visible, but should not go
+ the tie has to be long enough to be visible, but should not go
through key sigs. In the 1.5 series the pref.matter - note
distance is fixed , so this won't be a problem anymore.
- */
- Real lambda = 0.9;
-
+ */
+ Real lambda = 0.9;
+
if (Note_head::has_interface (l))
{
Real where = RIGHT;
/*
This correction is due te the shape of the black note head.
- */
+ */
if (Rhythmic_head::duration_log (l) == 2)
where += dir* 0.2;
left_x = l->extent (l, X_AXIS).linear_combination (where)
}
else
left_x = l->extent (l, X_AXIS).linear_combination (lambda);
-
Real width;
if (Note_head::has_interface (l) && Note_head::has_interface (r))
{
- width =
- + r->extent (commonx, X_AXIS)[LEFT]
+ width
+ = + r->extent (commonx, X_AXIS)[LEFT]
- l->extent (commonx, X_AXIS)[RIGHT]
-2 * x_gap_f;
}
- l->extent (commonx, X_AXIS)[RIGHT]
- 2 * x_gap_f;
else
- width =
- - l->extent (commonx, X_AXIS).linear_combination (lambda)
+ width
+ = -l->extent (commonx, X_AXIS).linear_combination (lambda)
+ r->extent (commonx, X_AXIS)[LEFT]
- 2 * x_gap_f;
}
-
-
SCM details = me->get_property ("details");
SCM lim // groetjes aan de chirurgendochter.
= scm_assq (ly_symbol2scm ("height-limit"), details);
-
- Real h_inf = scm_to_double (scm_cdr (lim)) * staff_space;
+
+ Real h_inf = scm_to_double (scm_cdr (lim)) * staff_space;
Real r_0 = scm_to_double (scm_cdr (scm_assq (ly_symbol2scm ("ratio"), details)));
- Bezier b = slur_shape (width, h_inf, r_0);
-
+ Bezier b = slur_shape (width, h_inf, r_0);
+
/*
I think this better, particularly for small ties. It always allows the user to move ties if
they seem in the wrong place
*/
- Real ypos = Tie::get_position (me) * staff_space/2
+ Real ypos = Tie::get_position (me) * staff_space / 2
+ dir * scm_to_double (me->get_property ("y-offset"));;
/*
Make sure we don't start on a dots
- */
+ */
if (Note_head::has_interface (l) && Rhythmic_head::get_dots (l))
{
- Grob* dots = Rhythmic_head::get_dots (l);
+ Grob *dots = Rhythmic_head::get_dots (l);
if (fabs (staff_space * Staff_symbol_referencer::get_position (dots) /2
- - ypos) < 0.5)
+ - ypos) < 0.5)
{
- ypos += 0.5 * dir ;
+ ypos += 0.5 * dir;
}
}
-
/*
todo: prevent ending / staffline collision.
todo: tie / stem collision
- */
+ */
b = slur_shape (width, h_inf, r_0);
b.scale (1, dir);
b.translate (Offset (left_x, ypos));
-
/*
Avoid colliding of the horizontal part with stafflines.
-
+
TODO: redo this, heuristic is half-baken, and ties often look ugly
as a result.
TODO: doesn't work when on staff with even number of lines.
- */
+ */
Array<Real> horizontal (b.solve_derivative (Offset (1, 0)));
if (horizontal.size ())
{
/*
ugh. Doesnt work for non-horizontal curves.
- */
+ */
Real y = b.curve_point (horizontal[0])[Y_AXIS];
- Real ry = rint (y/staff_space) * staff_space;
+ Real ry = rint (y / staff_space) * staff_space;
Real diff = ry - y;
Real newy = y;
Real clear = staff_space * scm_to_double (me->get_property ("staffline-clearance"));
- if (fabs (y) <=
- Staff_symbol_referencer::staff_radius (me) * staff_space + clear
+ if (fabs (y)
+ <= Staff_symbol_referencer::staff_radius (me) * staff_space + clear
&& fabs (diff) < clear)
{
Real y1 = ry + clear;
Any way. This test is to make sure that staffline
collision avoidance does not result in completely flat
ties.
- */
+ */
if (fabs (y1 - ypos) < 0.5)
y1 = y2;
else if (fabs (y2 - ypos) < 0.5)
y2 = y1;
-
+
newy = (fabs (y1 - y) < fabs (y2 - y)) ? y1 : y2;
-
+
// newy = ry - 0.5 * staff_space * sign (diff) ;
/*
we don't want horizontal ties
- */
+ */
if (fabs (newy - b.control_[0][Y_AXIS]) < 1e-2)
{
- newy = newy + dir * staff_space;
+ newy = newy + dir * staff_space;
}
}
Real y0 = b.control_ [0][Y_AXIS];
- b.control_[2][Y_AXIS] =
- b.control_[1][Y_AXIS] =
- (b.control_[1][Y_AXIS] - y0) * ((newy - y0) / (y - y0)) + y0;
+ b.control_[2][Y_AXIS]
+ = b.control_[1][Y_AXIS]
+ = (b.control_[1][Y_AXIS] - y0) * ((newy - y0) / (y - y0)) + y0;
}
else
programming_error ("Tie is nowhere horizontal");
-
-
SCM controls = SCM_EOL;
for (int i = 4; i--;)
controls = scm_cons (ly_offset2scm (b.control_[i]), controls);
return controls;
}
-
MAKE_SCHEME_CALLBACK (Tie, print, 1);
SCM
-Tie::print (SCM smob)
+Tie::print (SCM smob)
{
- Grob*me = unsmob_grob (smob);
+ Grob *me = unsmob_grob (smob);
SCM cp = me->get_property ("control-points");
if (!scm_is_pair (cp)) // list is more accurate
if (!scm_is_pair (cp))
return Stencil ().smobbed_copy ();
-
+
Real thick
= Staff_symbol_referencer::line_thickness (me)
- * robust_scm2double (me->get_property ("thickness"), 1);
+ * robust_scm2double (me->get_property ("thickness"), 1);
Bezier b;
int i = 0;
b.control_[i] = ly_scm2offset (scm_car (s));
i++;
}
-
- Stencil a = Lookup::slur (b, get_grob_direction (me) * thick, thick);
-
- return a.smobbed_copy ();
-}
+ Stencil a = Lookup::slur (b, get_grob_direction (me) * thick, thick);
+ return a.smobbed_copy ();
+}
ADD_INTERFACE (Tie, "tie-interface",
- "A tie connecting two noteheads.\n"
- ,
- "y-offset staffline-clearance control-points head-pair details thickness x-gap direction minimum-length");
+ "A tie connecting two noteheads.\n",
+ "y-offset staffline-clearance control-points head-pair details thickness x-gap direction minimum-length");
projects / lilypond.git / blobdiff