-/*\r
-Copyright 2012 Jun Wako <wakojun@gmail.com>\r
-\r
-This program is free software: you can redistribute it and/or modify\r
-it under the terms of the GNU General Public License as published by\r
-the Free Software Foundation, either version 2 of the License, or\r
-(at your option) any later version.\r
-\r
-This program is distributed in the hope that it will be useful,\r
-but WITHOUT ANY WARRANTY; without even the implied warranty of\r
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\r
-GNU General Public License for more details.\r
-\r
-You should have received a copy of the GNU General Public License\r
-along with this program. If not, see <http://www.gnu.org/licenses/>.\r
-*/\r
-\r
-#ifndef CONFIG_H\r
-#define CONFIG_H\r
-\r
-#include "config_common.h"\r
-\r
-/* USB Device descriptor parameter */\r
-#define VENDOR_ID 0xFEED\r
-#define PRODUCT_ID 0x6060\r
-#define DEVICE_VER 0x0001\r
-#define MANUFACTURER geekhack\r
-#define PRODUCT GH60\r
-#define DESCRIPTION t.m.k. keyboard firmware for GH60\r
-\r
-/* key matrix size */\r
-#define MATRIX_ROWS 5\r
-#define MATRIX_COLS 14\r
-\r
-/*\r
- * Keyboard Matrix Assignments\r
- *\r
- * Change this to how you wired your keyboard\r
- * COLS: AVR pins used for columns, left to right\r
- * ROWS: AVR pins used for rows, top to bottom\r
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)\r
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)\r
- *\r
-*/\r
- #define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }\r
-// Rev A\r
-// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 }\r
-// Rev B/C\r
- #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }\r
-#define UNUSED_PINS\r
-\r
-/* COL2ROW or ROW2COL */\r
-#define DIODE_DIRECTION COL2ROW\r
-\r
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */\r
-#define DEBOUNCING_DELAY 5\r
-\r
-/* define if matrix has ghost (lacks anti-ghosting diodes) */\r
-//#define MATRIX_HAS_GHOST\r
-\r
-/* number of backlight levels */\r
-#define BACKLIGHT_LEVELS 3\r
-\r
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */\r
-#define LOCKING_SUPPORT_ENABLE\r
-/* Locking resynchronize hack */\r
-#define LOCKING_RESYNC_ENABLE\r
-\r
-/*\r
- * Force NKRO\r
- *\r
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved\r
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the\r
- * makefile for this to work.)\r
- *\r
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)\r
- * until the next keyboard reset.\r
- *\r
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is\r
- * fully operational during normal computer usage.\r
- *\r
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)\r
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by\r
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a\r
- * power-up.\r
- *\r
- */\r
-//#define FORCE_NKRO\r
-\r
-/*\r
- * Magic Key Options\r
- *\r
- * Magic keys are hotkey commands that allow control over firmware functions of\r
- * the keyboard. They are best used in combination with the HID Listen program,\r
- * found here: https://www.pjrc.com/teensy/hid_listen.html\r
- *\r
- * The options below allow the magic key functionality to be changed. This is\r
- * useful if your keyboard/keypad is missing keys and you want magic key support.\r
- *\r
- */\r
-\r
-/* key combination for magic key command */\r
-#define IS_COMMAND() ( \\r
- keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \\r
-)\r
-\r
-/* control how magic key switches layers */\r
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true\r
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true\r
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false\r
-\r
-/* override magic key keymap */\r
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS\r
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS\r
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM\r
-//#define MAGIC_KEY_HELP1 H\r
-//#define MAGIC_KEY_HELP2 SLASH\r
-//#define MAGIC_KEY_DEBUG D\r
-//#define MAGIC_KEY_DEBUG_MATRIX X\r
-//#define MAGIC_KEY_DEBUG_KBD K\r
-//#define MAGIC_KEY_DEBUG_MOUSE M\r
-//#define MAGIC_KEY_VERSION V\r
-//#define MAGIC_KEY_STATUS S\r
-//#define MAGIC_KEY_CONSOLE C\r
-//#define MAGIC_KEY_LAYER0_ALT1 ESC\r
-//#define MAGIC_KEY_LAYER0_ALT2 GRAVE\r
-//#define MAGIC_KEY_LAYER0 0\r
-//#define MAGIC_KEY_LAYER1 1\r
-//#define MAGIC_KEY_LAYER2 2\r
-//#define MAGIC_KEY_LAYER3 3\r
-//#define MAGIC_KEY_LAYER4 4\r
-//#define MAGIC_KEY_LAYER5 5\r
-//#define MAGIC_KEY_LAYER6 6\r
-//#define MAGIC_KEY_LAYER7 7\r
-//#define MAGIC_KEY_LAYER8 8\r
-//#define MAGIC_KEY_LAYER9 9\r
-//#define MAGIC_KEY_BOOTLOADER PAUSE\r
-//#define MAGIC_KEY_LOCK CAPS\r
-//#define MAGIC_KEY_EEPROM E\r
-//#define MAGIC_KEY_NKRO N\r
-//#define MAGIC_KEY_SLEEP_LED Z\r
-\r
-/*\r
- * Feature disable options\r
- * These options are also useful to firmware size reduction.\r
- */\r
-\r
-/* disable debug print */\r
-//#define NO_DEBUG\r
-\r
-/* disable print */\r
-//#define NO_PRINT\r
-\r
-/* disable action features */\r
-//#define NO_ACTION_LAYER\r
-//#define NO_ACTION_TAPPING\r
-//#define NO_ACTION_ONESHOT\r
-//#define NO_ACTION_MACRO\r
-//#define NO_ACTION_FUNCTION\r
-\r
-#endif\r
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6060
+#define DEVICE_VER 0x0001
+#define MANUFACTURER geekhack
+#define PRODUCT GH60
+#define DESCRIPTION t.m.k. keyboard firmware for GH60
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+ #define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
+// Rev A
+// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 }
+// Rev B/C
+ #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1 H
+//#define MAGIC_KEY_HELP2 SLASH
+//#define MAGIC_KEY_DEBUG D
+//#define MAGIC_KEY_DEBUG_MATRIX X
+//#define MAGIC_KEY_DEBUG_KBD K
+//#define MAGIC_KEY_DEBUG_MOUSE M
+//#define MAGIC_KEY_VERSION V
+//#define MAGIC_KEY_STATUS S
+//#define MAGIC_KEY_CONSOLE C
+//#define MAGIC_KEY_LAYER0_ALT1 ESC
+//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
+//#define MAGIC_KEY_LAYER0 0
+//#define MAGIC_KEY_LAYER1 1
+//#define MAGIC_KEY_LAYER2 2
+//#define MAGIC_KEY_LAYER3 3
+//#define MAGIC_KEY_LAYER4 4
+//#define MAGIC_KEY_LAYER5 5
+//#define MAGIC_KEY_LAYER6 6
+//#define MAGIC_KEY_LAYER7 7
+//#define MAGIC_KEY_LAYER8 8
+//#define MAGIC_KEY_LAYER9 9
+//#define MAGIC_KEY_BOOTLOADER PAUSE
+//#define MAGIC_KEY_LOCK CAPS
+//#define MAGIC_KEY_EEPROM E
+//#define MAGIC_KEY_NKRO N
+//#define MAGIC_KEY_SLEEP_LED Z
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
projects / qmk_firmware.git / blobdiff