adds timeout to avr i2c

[qmk_firmware.git] / keyboards / ergodox_ez / config.h

diff --git a/keyboards/ergodox_ez/config.h b/keyboards/ergodox_ez/config.h
index 2bb56731b27caf46b35c832c1788d3e71e7c1e3a..ec1620030c9c18e55c0265bc4472092426824bc9 100644 (file)
--- a/keyboards/ergodox_ez/config.h
+++ b/keyboards/ergodox_ez/config.h
@@ -16,8 +16,8 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_H
-#define CONFIG_H
+#ifndef ERGODOX_EZ_CONFIG_H
+#define ERGODOX_EZ_CONFIG_H
 
 #include "config_common.h"
 
@@ -31,23 +31,20 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* key matrix size */
 #define MATRIX_ROWS 14
+#define MATRIX_ROWS_PER_SIDE (MATRIX_ROWS / 2)
 #define MATRIX_COLS 6
 
-#define MOUSEKEY_DELAY          100
 #define MOUSEKEY_INTERVAL       20
-#define MOUSEKEY_MAX_SPEED      3
-#define MOUSEKEY_TIME_TO_MAX    10
+#define MOUSEKEY_DELAY          0
+#define MOUSEKEY_TIME_TO_MAX    60
+#define MOUSEKEY_MAX_SPEED      7
+#define MOUSEKEY_WHEEL_DELAY 0
 
 #define TAPPING_TOGGLE  1
 
 /* define if matrix has ghost */
 //#define MATRIX_HAS_GHOST
 
-/* number of backlight levels */
-#define BACKLIGHT_LEVELS 3
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE    5
 #define TAPPING_TERM    200
 #define IGNORE_MOD_TAP_INTERRUPT // this makes it possible to do rolling combos (zx) with keys that convert to other keys on hold (z becomes ctrl when you hold it, and when this option isn't enabled, z rapidly followed by x actually sends Ctrl-x. That's bad.)
 
@@ -62,6 +59,66 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     keyboard_report->mods == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)) \
 )
 
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+
+#ifndef LED_BRIGHTNESS_LO
+#define LED_BRIGHTNESS_LO       15
+#endif
+#ifndef LED_BRIGHTNESS_HI
+#define LED_BRIGHTNESS_HI       255
+#endif
+#define LED_BRIGHTNESS_DEFAULT (LED_BRIGHTNESS_HI)
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D7
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 15     // Number of LEDs
+#define RGBLIGHT_HUE_STEP 12
+#define RGBLIGHT_SAT_STEP 255
+#define RGBLIGHT_VAL_STEP 12
+
+/* fix space cadet rollover issue */
+#define DISABLE_SPACE_CADET_ROLLOVER
+
+// #define RGBW_BB_TWI
+
+// #define RGBW 1
+
+/* "debounce" is measured in keyboard scans. Some users reported
+ * needing values as high as 15, which was at the time around 50ms.
+ * If you don't define it here, the matrix code will default to
+ * 5, which is now closer to 10ms, but still plenty according to
+ * manufacturer specs.
+ *
+ * Default is quite high, because of reports with some production
+ * runs seeming to need it. This may change when configuration for
+ * this is more directly exposed.
+ */
+#define DEBOUNCE    15
+
+#define PREVENT_STUCK_MODIFIERS
+
+#define USB_MAX_POWER_CONSUMPTION 500
+
+// RGB backlight
+#define DRIVER_ADDR_1 0b1110100
+#define DRIVER_ADDR_2 0b1110111
+#define DRIVER_COUNT 2
+#define DRIVER_1_LED_TOTAL 24
+#define DRIVER_2_LED_TOTAL 24
+#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL
+#define RGB_MATRIX_SKIP_FRAMES 10
+
+// #define RGBLIGHT_COLOR_LAYER_0 0x00, 0x00, 0xFF
+/* #define RGBLIGHT_COLOR_LAYER_1 0x00, 0x00, 0xFF */
+/* #define RGBLIGHT_COLOR_LAYER_2 0xFF, 0x00, 0x00 */
+/* #define RGBLIGHT_COLOR_LAYER_3 0x00, 0xFF, 0x00 */
+/* #define RGBLIGHT_COLOR_LAYER_4 0xFF, 0xFF, 0x00 */
+/* #define RGBLIGHT_COLOR_LAYER_5 0x00, 0xFF, 0xFF */
+/* #define RGBLIGHT_COLOR_LAYER_6 0xFF, 0x00, 0xFF */
+/* #define RGBLIGHT_COLOR_LAYER_7 0xFF, 0xFF, 0xFF */
+
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -81,4 +138,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_FUNCTION
 //#define DEBUG_MATRIX_SCAN_RATE
 
+#define I2C_TIMEOUT 1000
+
 #endif