Added SS_TAP_CODE, SS_DOWN_CODE, SS_UP_CODE

[qmk_firmware.git] / docs / newbs_flashing.md

diff --git a/docs/newbs_flashing.md b/docs/newbs_flashing.md
index 4cd7c5c44a1f311785ca8249cee68a97832fc4fa..9d2bf920f53afb6219d8ffa766d9b686ae4e3536 100644 (file)
--- a/docs/newbs_flashing.md
+++ b/docs/newbs_flashing.md
@@ -12,17 +12,15 @@ However, the QMK Toolbox is only available for Windows and macOS currently.  If
 
 Begin by opening the QMK Toolbox application. You'll want to locate the firmware file in Finder or Explorer. Your keyboard firmware may be in one of two formats- `.hex` or `.bin`. QMK tries to copy the appropriate one for your keyboard into the root `qmk_firmware` directory.
 
-{% hint style='info' %}
-If you are on Windows or macOS there are commands you can use to easily open the current firmware folder in Explorer or Finder.
+?> If you are on Windows or macOS there are commands you can use to easily open the current firmware folder in Explorer or Finder.
 
-Windows:
+?> Windows:
 
     start .
 
-macOS:
+?> macOS:
 
     open .
-{% endhint %}
 
 The firmware file always follows this naming format:
 
@@ -88,7 +86,7 @@ If you know what bootloader that you're using, then when compiling the firmware,
 
 ### DFU
 
-For the DFU bootloader, when you're ready to compile and flash your firmware, open up your terminal window and run the built command: 
+For the DFU bootloader, when you're ready to compile and flash your firmware, open up your terminal window and run the build command: 
 
     make <my_keyboard>:<my_keymap>:dfu
 
@@ -135,7 +133,7 @@ If you have any issues with this, you may need to this:
 
 ### Caterina 
 
-For Arduino boards and their close (such as the SparkFun ProMicro), when you're ready to compile and flash your firmware, open up your terminal window and run the built command: 
+For Arduino boards and their clones (such as the SparkFun ProMicro), when you're ready to compile and flash your firmware, open up your terminal window and run the build command: 
 
     make <my_keyboard>:<my_keymap>:avrdude
 
@@ -203,7 +201,7 @@ If you have any issues with this, you may need to this:
 
 ## HalfKay
 
-For the PJRC devices (Teensy's), when you're ready to compile and flash your firmware, open up your terminal window and run the built command: 
+For the PJRC devices (Teensy's), when you're ready to compile and flash your firmware, open up your terminal window and run the build command: 
 
     make <my_keyboard>:<my_keymap>:teensy