ftp://ftp.cs.uu.nl/pub/GNU/LilyPond/
(ftp://ftp.cs.uu.nl/pub/GNU/LilyPond/).
- _If you upgrade by patching do remember to rerun autoconf after
-applying the patch_.
+ There are three options for downloading sources.
- If you do not want to download the entire archive for each version,
-the safest method for upgrading is to use `xdelta', see
-`ftp://ftp.xcf.berkeley.edu/pub/xdelta/'.
+ * if you don't have any version, then you can download the entire
+ `.tar.gz' file.
- The following command produces `lilypond-1.3.122.tar.gz' from
-`lilypond-1.3.121' identical (up to compression dates) to the .122 on
-the FTP site.
- xdelta patch lilypond-1.3.121-1.3.122.xd lilypond-1.3.121.tar.gz
+ * if you have an unpacked source tree of a previous version, you
+ may use the diffs .
-Prerequisites
-=============
+ _If you upgrade by patching do remember to rerun autoconf after
+ applying the patch_.
+
+ * if you have the `.tar.gz' file of a previous release, you can use
+ xdelta (ftp://ftp.xcf.berkeley.edu/pub/xdelta/). This is much
+ safer than using normal diffs, and is the recommended way.
- For compilation you need:
+ The following command produces `lilypond-1.3.122.tar.gz' from
+ `lilypond-1.3.121' identical (up to compression dates) to the .122
+ on the FTP site.
+ xdelta patch lilypond-1.3.121-1.3.122.xd lilypond-1.3.121.tar.gz
- * A GNU system: GNU LilyPond is known to run on these GNU systems:
- Linux (PPC, intel), FreeBSD, AIX, NeXTStep, IRIX, Digital Unix
- and Solaris.
+Build requirements
+==================
- * Lots of disk space: LilyPond takes between 30 and 100 mb to
- compile if you use debugging information. If you are short on
- disk-space run configure with `--disable-debugging'.
+ This document describes how to build LilyPond on Unix platforms. It
+is also known to run and compile on Windows NT/95/98 as well. More
+information on this topic can be found at Jan's windows page
+(http://appel.lilypond.org/lilypond/gnu-windows/).
- * Although we recommend to use Unix, LilyPond is known to run on
- Windows NT/95/98 as well. See Section Windows NT/95,es.
+ You need the following packages to compile Lilypond.
- * A reasonable C++ compiler: EGCS 1.1, GCC 2.95.2 or newer. Check
- out `ftp://ftp.gnu.org/gnu/gcc/'.
+ * A reasonably new C++ compiler: EGCS 1.1, GCC 2.95.2 or newer.
+ Check out the gcc site (ftp://ftp.gnu.org/gnu/gcc/).
- * Python 1.5, Check out `ftp://ftp.python.org' or
- `ftp://ftp.cwi.nl/pub/python'.
+ * Python 1.5, Check out the python website (http://www.python.org).
- * GUILE 1.3.4 or newer, check out
- http://www.gnu.org/software/guile/guile.html
+ * GUILE 1.3.4 or newer, check out the GUILE webpage
(http://www.gnu.org/software/guile/guile.html). Version 1.4 is
recommended for better performance.
- * GNU Make. Check out ftp://ftp.gnu.org/gnu/make/
+ * GNU Make. Check out the GNU make FTP directory
(ftp://ftp.gnu.org/gnu/make/).
- * Flex (version 2.5.4a or newer). Check out
- ftp://ftp.gnu.org/pub/gnu/non-gnu/flex/
- (ftp://ftp.gnu.org/pub/gnu/non-gnu/flex/).
+ * Flex (version 2.5.4a or newer). Check out the Flex webpage
+ (http://www.gnu.org/software/flex/).
- * Bison (version 1.25 or newer). Check out
- ftp://ftp.gnu.org/gnu/bison/ (ftp://ftp.gnu.org/gnu/bison/).
+ * Bison (version 1.25 or newer). Check out the bison webpage
+ (http://www.gnu.org/software/bison/)
+
+ * TeX.
- * TeX. If you want LilyPond to use kpathsea support (recommended),
- make sure you have tetex 1.0 or newer (1.0.6 is known to work).
- You may need to install a tetex-devel or tetex-dev package too.
+ If you want LilyPond to use kpathsea support (recommended), make
+ sure you have tetex 1.0 or newer (1.0.6 is known to work). You
+ may need to install a tetex-devel or tetex-dev package too.
- * Texinfo (version 4.0 or newer). Check out
- ftp://ftp.gnu.org/gnu/texinfo/ (ftp://ftp.gnu.org/gnu/texinfo/).
- Most documentation is in texinfo.
+ * Texinfo (version 4.0 or newer). The documentation of lily is
+ written in texinfo. Check out the texinfo FTP directory
+ (ftp://ftp.gnu.org/gnu/texinfo/).
- * The geometry package for LaTeX is needed to use ly2dvi. Available
- at
- ftp://ftp.ctan.org/tex-archive/macros/latex/contrib/supported/geometry
- (ftp://ftp.ctan.org/tex-archive/macros/latex/contrib/supported/geometry)
- or at mirror site ftp://ftp.dante.de (ftp://ftp.dante.de)
+ * The geometry package for LaTeX is needed to use ly2dvi. It is
+ available at the FTP directory for `geometry'
+ (ftp://ftp.ctan.org/tex-archive/macros/latex/contrib/supported/geometry).
+ This package is normally included with the TeX distribution.
* MetaPost, needed for generating PostScript fonts. Please note that
tetex-0.4pl8 (included with Red Hat 5.x) does not include
`mfplain.mp', which is needed for producing the scalable font
files.
- If you do not want to use PostScript output, edit `mf/GNUmakefile',
- removing the line saying `PFA_FILES='
+ If you don't have MetaPost and don't want to use PostScript
+ output, then edit `mf/GNUmakefile', removing the line saying
+ `PFA_FILES='.
* kpathsea, a library for searching (TeX) files. `kpathsea' is
usually included with your installation of TeX.
-Running
-=======
+Running requirements
+====================
GNU LilyPond does use a lot of resources. For operation you need the
following software
* TeX.
- * A PostScript printer and/or viewer (such as Ghostscript) is
- strongly recommended. Xdvi will show all embedded PostScript
- too if you have Ghostscript installed.
+ * Xdvi and ghostscript
- * GUILE 1.3.4, or newer. Check out
- http://www.gnu.org/software/guile/
- (http://www.gnu.org/programs/guile.html)
+ * GUILE 1.3.4, or newer. Check out the GUILE webpage
+ (http://www.gnu.org/software/guile.html)
For running LilyPond successfully you have to help TeX and MetaFont
find various files. The recommended way of doing so is adjusting the
environment variables in the start-up scripts of your shell. Appropriate
-Csh and sh scripts are left in `buildscripts/out/lilypond-profile' and
+Csh and bourne sh scripts are left in
+`buildscripts/out/lilypond-profile' and
`buildscripts/out/lilypond-login' after compilation.
- The empty path component represents TeX and MetaFont's default search
-paths. Scripts with the proper paths for the bourne and C-shell
-respectively are generated in `buildscripts/out/lilypond-profile' and
-`buildscripts/out/lilypond-login' during compilation.
-
LilyPond is a big and slow program. A fast CPU and plenty of RAM is
recommended for comfortable use.
-Website
-=======
+Website requirements
+====================
- The website is the most convenient form to use for reading the
-documentation on-line documentation. It is made by entering
+ The documentation comes in the form of a website. You can view this
+website on the internet, but you can also build it locally. This process
+requires a successful compile of lilypond. The website is built by
+issuing
- make htmldoc
- This does require a functioning LilyPond. The binary doesn't have to
-be installed.
+ make web-doc
- If you want to auto-generate Lily's website, you'll need some
-additional conversion tools.
+ Building the website requires some additional tools:
- * xpmtoppm (from the netpbm package: the Portable Bitmap Utilities)
- (For Red Hat Linux users: it is included within the
- package libgr-progs). The original is at
- ftp://ftp.x.org/contrib/utilities/netpbm-1mar1994.p1.tar.gz
+ * xpmtoppm (from the netpbm package: the Portable Bitmap Utilities).
+ The original is at the netpbm FTP site
(ftp://ftp.x.org/contrib/utilities/netpbm-1mar1994.p1.tar.gz)
- * pnmtopng (also in libgr-progs for Red Hat). The original is at
- ftp://swrinde.nde.swri.edu/pub/png/applications/pnmtopng-2.37.2.tar.gz
- (ftp://swrinde.nde.swri.edu/pub/png/applications/pnmtopng-2.37.2.tar.gz).i
-
- The version of `pnmtopng' that is distributed with Red Hat 5.1 and
- 5.2 contains a bug: pnmtopng is dynamically linked to the wrong
- version of libpng.
+ * pnmtopng. The original is at in the pnmtopng FTP site
+ (ftp://swrinde.nde.swri.edu/pub/png/applications/pnmtopng-2.37.2.tar.gz).
* Bibtex2html (http://www.lri.fr/~filliatr/ftp/bibtex2html/), or
Bib2html (http://www.uni-koblenz.de/ag-ki/ftp/bib2html/).
Configuring and compiling
=========================
- to install GNU LilyPond, simply type:
+ to install GNU LilyPond, type:
gunzip -c lilypond-x.y.z | tar xf -
cd lilypond-x.y.z
- ./configure # fill in your standard prefix with --prefix
+ ./configure # run with --help to see appropriate options
make
make install
+ sh buildscripts/clean-fonts.sh
- This will install a number of files, something close to:
-
- /usr/local/man/man1/midi2ly.1
- /usr/local/man/man1/abc2ly.1
- /usr/local/man/man1/etf2ly.1
- /usr/local/man/man1/convert-ly.1
- /usr/local/man/man1/lilypond-book.1
- /usr/local/man/man1/lilypond.1
- /usr/local/bin/lilypond
- /usr/local/bin/midi2ly
- /usr/local/bin/convert-ly
- /usr/local/bin/lilypond-book
- /usr/local/bin/abc2ly
- /usr/local/bin/pmx2ly
- /usr/local/bin/musedata2ly
- /usr/local/bin/etf2ly
- /usr/local/share/lilypond/*
- /usr/local/share/locale/{....}/LC_MESSAGES/lilypond.mo
-
- The above assumes that you are root and have the GNU development
-tools, and your make is GNU make. If this is not the case, you can
-adjust your environment variables to your taste:
-
-
- export CPPFLAGS="-I /home/me/my_include -DWEIRD_FOOBAR"
- ./configure
-
- `CPPFLAGS' are the preprocessor flags.
-
- The configure script is Cygnus configure, and it will accept
-`--help'. If you are not root, you will probably have to make it with a
-different `--prefix' option. Our favourite location is
+ If you are doing an upgrade, you should remove all `feta' `.pk' and
+`.tfm' files. A script has been provided to do the work for you, see
+`buildscripts/clean-fonts.sh'.
+ If you are not root, you should choose a `--prefix' argument that
+points into your home directory, eg.
./configure --prefix=$HOME/usr
- In this case, you will have to set up MFINPUTS, and TEXINPUTS
-accordingly.
-
- Since GNU LilyPond currently is beta, you are advised to also use
-
-
- --enable-debugging
- --enable-checking
-
- Options to configure include:
-
-``--enable-printing''
- Enable debugging print routines (lilypond `-D' option)
-
-``--enable-optimise''
- Set maximum optimisation: compile with `-O2'. This can be
- unreliable on some compiler/platform combinations (eg, DEC Alpha
- and PPC)
-
-``--enable-profiling''
- Compile with support for profiling.
-
-``--enable-config''
- Output to a different configuration file. Needed for
- multi-platform builds
-
- All options are documented in the `configure' help The option
-`--enable-optimise' is recommended for Real Life usage.
-
- If you do
-
-
- make all
-
- everything will be compiled, but nothing will be installed. The
-resulting binaries can be found in the subdirectories `out/' (which
-contain all files generated during compilation).
+ In this case, you have to insert the contents of
+`buildscripts/out/lilypond-login' or
+`buildscripts/out/lilypond-profile' into your start up scripts by hand.
Configuring for multiple platforms
==================================
- If you want to compile LilyPond with different configuration
-settings, then, you can use the `--enable-config' option. Example:
-suppose I want to build with and without profiling. Then I'd use the
-following for the normal build,
-
+ If you want to build multiple versions of LilyPond with different
+configuration settings, you can use the `--enable-config=CONF' option
+of configure. You should use `make conf=CONF' to generate the output
+in `out-CONF'. Example: suppose I want to build with and without
+profiling. Then I'd use the following for the normal build,
- ./configure --prefix=~ --disable-optimise --enable-checking
+ ./configure --prefix=~ --enable-checking
make
make install
and for the profiling version, I specify a different configuration.
- ./configure --prefix=~ --enable-profiling --enable-config=prof --enable-optimise --disable-checking
- make config=prof
- make config=prof install
+ ./configure --prefix=~ --enable-profiling --enable-config=prof --disable-checking
+ make conf=prof
+ make conf=prof install
-Installing
+Emacs mode
==========
- if you have done a successful `make', then a simple
+ An emacs mode for LilyPond is included with the source archive as
+`lilypond-mode.el' and `lilypond-font-lock.el'. If you have an RPM, it
+is in `/usr/share/doc/lilypond-X/'. You have to install it yourself.
+ Add this to your ~/.emacs or ~/.emacs.el:
+ (load-library "lilypond-mode.el")
+ (setq auto-mode-alist
+ (cons '("\\.ly$" . LilyPond-mode) auto-mode-alist))
+ (add-hook 'LilyPond-mode-hook (lambda () (turn-on-font-lock)))
- make install
-
- should do the trick.
-
- If you are doing an upgrade, please remember to remove obsolete
-`.pk' and `.tfm' files of the fonts. A script has been provided to do
-the work for you, see `bin/clean-fonts.sh'.
+ If you have the latest LilyPond-1.3.x Debian package, LilyPond-mode
+is automatically loaded, so you need not modify your `~/.emacs' file.
Red Hat Linux
=============
- Red Hat Linux users can compile an RPM. A spec file is in
-`make/out/lilypond.spec'; it is distributed along with the sources.
+ Red Hat 7.0 i386 RPMS are available from
+`ftp://ftp.cs.uu.nl/pub/GNU/LilyPond/RedHat/'.
- You can make the rpm by issuing
+ You can also compile them yourself. A spec file is in
+`make/out/lilypond.spec'. This file is distributed along with the
+sources. You can make the rpm by issuing
rpm -tb lilypond-x.y.z.tar.gz
rpm -i /usr/src/redhat/RPMS/i386/lilypond-x.y.z
- Precompiled Red Hat 7.0 i386 RPMS are available from
-`ftp://ftp.cs.uu.nl/pub/GNU/LilyPond/RedHat/'.
+ For running on a Red Hat system you need these packages: guile,
+tetex, tetex-dvips, libstdc++, python, ghostscript.
For compilation on a Red Hat system you need these packages, in
-addition to the those needed for running:
- * glibc-devel
-
- * libstdc++-devel
+addition to the those needed for running: glibc-devel, gcc-c++,
+libstdc++-devel, guile-devel, flex, bison, texinfo, tetex-devel, groff,
+libgr-progs.
- * guile-devel
+SuSE
+====
- * flex
+ [TODO: document this]
- * bison
+ Install `tetex', `te_mpost', `te_kpath'.
- * texinfo
+Mandrake
+========
- * tetex-devel
+ [TODO]
Debian GNU/Linux
================
dpkg --purge lilypond lilypond1.3
-Windows NT/95
-=============
-
- Separate instructions on building for W32 are available; See the
-files in `Documentation/ntweb/', included with the sources.
-
Problems
========
For help and questions use <help-gnu-music@gnu.org> and
<gnu-music-discuss@gnu.org>. Please consult the faq before mailing
-your problems.
-
- If you find bugs, please send bug reports to <bug-gnu-music@gnu.org>.
-
- Bugs that are LilyPond's fault are listed in our TODO list on the
-web, or demonstrated in `input/bugs/'.
-
- Bugs that are not LilyPond's fault are documented here.
-
-LinuxPPC Bugs:
-**************
-
- * egcs-1.1.2-12c (stock LinuxPPC R5) has a serious bug, upgrade to
- fixed in egcs-1.1.2-12f or gcc-2.95-0a,
- `ftp://dev.linuxppc.org/users/fsirl/R5/RPMS/ppc/'
-
- * egcs-1.0.2 (LinuxPPC R4): all compiling with `-O2' is suspect, in
- particular guile-1.3, and Lily herself will break.
-
-Linux-i386
-**********
-
- * SuSE6.2 and similar platforms (glibc 2.1, libstdc++ 2.9.0)
-
- Lily will crash during parsing (which suggests a C++ library
- incompatibility). Precise cause, precise platform description or
- solution are not known.
-
- Note that this only happens on some computers with the said
- platform.
-
- * libg++ 2.7
-
- LilyPond occasionally crashes while parsing the initialisation
- files. This is a very obscure bug, and usually entering the
- commandline differently "fixes" it.
-
- lilypond input.ly
-
- and
- lilypond -I. ./input.ly
- makes a difference
-
- Typical stacktrace:
- SIGSEGV
- __libc_malloc (bytes=16384)
- ?? ()
- yyFlexLexer::yy_create_buffer ()
- Includable_lexer::new_input (this=0x8209a00, s={strh_ = {
+your problems. If you find bugs, please send bug reports to
+<bug-gnu-music@gnu.org>.
- This behaviour has been observed with machines that have old libg++
- versions (LinuxPPC feb '98, Red Hat 4.x).
+ Bugs that are not fault of LilyPond are documented here.
Solaris:
********