-TITLE INFORMATION: INSTALL - compiling and installing GNU LilyPond
-AUTHOR INFORMATION: HWN & JCN
-Contents
+Table of Contents
+*****************
-1: ABSTRACT
-2: OBTAINING
-3: PREREQUISITES
-4: RUNNING
-5: WEBSITE
-6: CONFIGURING and COMPILING
-7: CONFIGURING FOR MULTIPLE PLATFORMS
-8: INSTALLING
-9: REDHAT LINUX
-10: DEBIAN GNU/LINUX
-11: WINDOWS NT/95
-12: AUTHORS
-1: ABSTRACT
-This document explains what you need to install LilyPond, and what you
-should do. If you are going to compile and install LilyPond often,
-e.g. when doing development, you might want to check out the
-buildscripts/set-lily.sh script. It sets some environment
-variables and symlinks, which comes in handly when you have to compile
-LilyPond more often.
-2: OBTAINING
+INSTALL - compiling and installing GNU LilyPond
+ Downloading
+ Source code
+ Precompiled binaries
+ Upgrading
+ Requirements
+ Compilation
+ Running requirements
+ Website requirements
+ Building LilyPond
+ Configuring for multiple platforms
+ Emacs mode
+ Compiling for distributions
+ Red Hat Linux
+ LinuxPPC
+ SuSE
+ Slackware
+ Mandrake
+ Debian GNU/Linux
+ Problems
+ FLex-2.5.4a and gcc-3.0
+ NetBSD
+ Solaris:
+ AIX
-You can get the latest version of LilyPond at
-ftp://ftp.cs.uu.nl/pub/GNU/LilyPond/. Refer to the links
-document for mirror sites.
-If you upgrade by patching do remember to rerun autoconf after
-applying the patch.
+INSTALL - compiling and installing GNU LilyPond
+***********************************************
-3: PREREQUISITES
+ This document describes how to build LilyPond on Unix platforms. It
+is also known to run and compile on Windows NT/95/98 as well. More
+information on this topic can be found at the LilyPond on Windows page
+(http://www.lilypond.org/gnu-windows/).
-For compilation you need:
+Downloading
+===========
-o A GNU system: GNU LilyPond is known to run on these GNU systems: Linux
- (PPC, intel), FreeBSD, AIX, NeXTStep, IRIX, Digital Unix and
-Solaris.
+ Even numbered versions are `stable'. The webpages for the stable
+version (1.2) reside on the GNU servers
+(http://www.gnu.org/software/lilypond). Big enhancements go into the
+latest odd numbered version (1.3), whose webpages are on the lilypond
+site (http://www.lilypond.org/).
-o Lots of disk space: LilyPond takes between 30 and 100 mb to
-compile if you use debugging information. If you are short on
-disk-space run configure with --disable-debugging.
+Source code
+-----------
-Although we recommend to use Unix, LilyPond is known to run on Windows
-NT/95/98 as well. See Section [w32].
+ If you want to compile LilyPond from source, download here:
+ * Download development releases from
+ `ftp://ftp.cs.uu.nl/pub/GNU/LilyPond/' by FTP and
+ `http://ftp.cs.uu.nl/pub/GNU/LilyPond/', by HTTP.
-o EGCS 1.1 or newer.
+ * `ftp://sca.uwaterloo.ca/pub/' by FTP (Canadian mirror)
-o Python 1.5,
-Check out
-ftp://ftp.python.org or ftp://ftp.cwi.nl/pub/python.
+ * at `lilypond.org' `ftp://ftp.lilypond.org/pub/LilyPond/' by FTP and
+ `http://www.lilypond.org/ftp/' by HTTP.
-o GUILE 1.3, check out http://www.gnu.org/software/guile/guile.html.
+ Of course, if your platform supports LilyPond, such as Debian
+GNU/Linux, FreeBSD, OpenBSD or NetBSD, you're encouraged to use the
+native build from source drill.
-o GNU make.
-Check out ftp://ftp.gnu.org.
+ For Red Hat Linux and SuSE Linux, `.spec' files are included in the
+tarball; see instructions below.
-o Flex (version 2.5.4 or newer).
-Check out ftp://ftp.gnu.org.
+Precompiled binaries
+--------------------
-o Bison (version 1.25 or newer).
-Check out ftp://ftp.gnu.org.
+ If you want to track bleeding edge development, try:
-o Yodl. All documentation will be in Yodl. (1.30.17)
-ftp://ftp.lilypond.org/pub/yodl
+ * Debian GNU/Linux
+ (ftp://ftp.debian.org/debian/pool/main/l/lilypond/) usually has
+ the latest binaries for the most useful stable and development
+ versions, while
-o The geometry package for LaTeX is needed to use ly2dvi.
-Available at
-ftp://ftp.ctan.org/tex-archive/macros/latex/contrib/supported/geometry
-or at mirror site ftp://ftp.dante.de
+ * Mandrake Cooker
+ (http://rpmfind.net/linux/mandrake/cooker/contrib/RPMS/) also
+ provides fairly recent versions.
-4: RUNNING
+ Binaries are made available for other popular platforms, but as we
+need to compile them ourselves, they are not updated for every version
+released.
-GNU LilyPond does use a lot of resources. For operation you need the
+ * Red Hat i386
+ (ftp://ftp.cs.uu.nl/pub/GNU/LilyPond/binaries/RedHat/RPMS/)
+
+ * SuSE (ftp://ftp.lilypond.org/pub/LilyPond/binaries/SuSE)
+
+ * LinuxPPC (ftp://ftp.lilypond.org/pub/LilyPond/binaries/linuxppc/)
+
+ * Windows (http://www.lilypond.org/gnu-windows/)
+
+Upgrading
+---------
+
+ There are two options for upgrading sources.
+
+ * if you have an unpacked source tree of a previous version, you may
+ the patches.
+
+ _If you upgrade by patching do remember to rerun autoconf after
+ applying the patch_.
+
+ * if you have the `.tar.gz' file of a previous release, you can use
+ xdelta (ftp://ftp.xcf.berkeley.edu/pub/xdelta/). This is much
+ safer than using patches, and is the recommended way.
+
+ The following command produces `lilypond-1.4.3.tar.gz' from
+ `lilypond-1.4.2.tar.gz' identical (up to compression dates) to the
+ .3 on the FTP site.
+ xdelta patch lilypond-1.4.2-1.4.3.xd lilypond-1.4.2.tar.gz
+
+Requirements
+============
+
+Compilation
+-----------
+
+ You need the following packages to compile Lilypond.
+
+ * A reasonably new C++ compiler: EGCS 1.1, GCC 2.95.2 or newer.
+ Check out the gcc site (ftp://ftp.gnu.org/gnu/gcc/).
+
+ * Python 1.5, Check out the python website (http://www.python.org).
+
+ * GUILE 1.3.4 or newer, check out the GUILE webpage
+ (http://www.gnu.org/software/guile/guile.html). Version 1.4 is
+ recommended for better performance.
+
+ * GNU Make. Check out the GNU make FTP directory
+ (ftp://ftp.gnu.org/gnu/make/).
+
+ * Flex (version 2.5.4a or newer). Check out the Flex webpage
+ (http://www.gnu.org/software/flex/).
+
+ * Bison (version 1.25 or newer). Check out the bison webpage
+ (http://www.gnu.org/software/bison/)
+
+ * TeX.
+
+ TeX is used as an output backend.
+
+ Also, TeX's libkpathsea is used to find the fonts (`.mf', `.afm',
+ `.tfm'). Make sure you have tetex 1.0 or newer (1.0.6 is known to
+ work). You may need to install a tetex-devel or tetex-dev package
+ too.
+
+ * Texinfo (version 4.0 or newer). The documentation of lily is
+ written in texinfo. Check out the texinfo FTP directory
+ (ftp://ftp.gnu.org/gnu/texinfo/).
+
+ * The geometry package for LaTeX is needed to use ly2dvi. It is
+ available at the FTP directory for `geometry'
+ (ftp://ftp.ctan.org/tex-archive/macros/latex/contrib/supported/geometry).
+ This package is normally included with the TeX distribution.
+
+ * kpathsea, a library for searching (TeX) files. `kpathsea' is
+ usually included with your installation of TeX. You may need to
+ install a tetex-devel or tetex-dev package too.
+
+ In the very unlikely case that kpathsea is not available for your
+ platform (ie, you're not running GNU/Linux, Windows, or any recent
+ UNIX), you can compile LilyPond without kpathsea support. In that
+ case, you'll probably have to indicate where TeX's tfm files live.
+ Invoke configure something like:
+
+ ./configure --without-kpathsea --enable-tfm-path=/usr/share/texmf/fonts/tfm/public/cm/:/usr/share/texmf/fonts/tfm/ams/symbols
+
+ * pktrace, [OPTIONAL], needed for generating PostScript Type1 fonts.
+ Get it from `http://www.cs.uu.nl/~hanwen/pktrace/'
+
+ * autotrace-0.27a, [OPTIONAL], needed for generating PostScript Type1
+ fonts. `http://autotrace.sourceforge.net'.
+
+ * MetaPost [OPTIONAL] needed for generating PostScript Type3 fonts.
+ Please note that tetex-0.4pl8 (included with Red Hat 5.x) does not
+ include `mfplain.mp', which is needed for producing the scalable
+ font files.
+
+ If you don't have MetaPost and don't want to use PostScript
+ output, then edit `mf/GNUmakefile', removing the line saying
+ `PFA_FILES='.
+
+
+Running requirements
+--------------------
+
+ GNU LilyPond does use a lot of resources. For operation you need the
following software
-o TeX
-o A PostScript printer and/or viewer (such as Ghostscript) is strongly
- recommended. Xdvi will show all embedded PostScript too if you have
- Ghostscript installed.
-o GUILE 1.3, check out http://www.gnu.org/programs/guile.html
+ * TeX.
+
+ * Xdvi and Ghostscript
+
+ * GUILE 1.3.4, or newer. Check out the GUILE webpage
+ (http://www.gnu.org/software/guile.html)
-For running LilyPond successfully you have to help TeX and MetaFont
+ For running LilyPond successfully you have to help TeX and MetaFont
find various files. The recommended way of doing so is adjusting the
-environment variables in the start-up scripts of your shell. An
-example is given here for the Bourne shell:
-export MFINPUTS="/usr/local/share/lilypond/mf:"
-export TEXINPUTS="/usr/local/share/lilypond/tex:/usr/local/share/lilypond/ps:"
-
-The empty path component
-represents TeX and MetaFont's default search paths. Scripts with
-the proper paths for the bourne and C-shell respectively are generated in
-buildscripts/out/lilypond-profile and
-buildscripts/out/lilypond-login during compilation.
-
-LilyPond is a hideously slow program. A fast CPU and plenty of RAM is
+environment variables in the start-up scripts of your shell. Appropriate
+Csh and bourne sh scripts are left in
+`buildscripts/out/lilypond-profile' and
+`buildscripts/out/lilypond-login' after compilation.
+
+ LilyPond is a big and slow program. A fast CPU and plenty of RAM is
recommended for comfortable use.
-5: WEBSITE
+Website requirements
+--------------------
+
+ The documentation comes in the form of a website. You can view this
+website on the internet, but you can also build it locally. This process
+requires a successful compile of lilypond. The website is built by
+issuing
+
+ make web-doc
+
+ Building the website requires some additional tools:
+
+ * xpmtoppm (from the netpbm package: the Portable Bitmap Utilities).
+ The original is at the netpbm FTP site
+ (ftp://ftp.x.org/contrib/utilities/netpbm-1mar1994.p1.tar.gz)
+
+ * pnmtopng. The original is at in the pnmtopng FTP site
+ (ftp://swrinde.nde.swri.edu/pub/png/applications/pnmtopng-2.37.2.tar.gz).
+
+ * Bibtex2html (http://www.lri.fr/~filliatr/ftp/bibtex2html/), or
+ Bib2html (http://www.uni-koblenz.de/ag-ki/ftp/bib2html/).
+ Bibtex2html is available in debian, while bib2html is in some rpm
+ based distributions. Bib2html, in turn depends on man2html for
+ proper installation. man2html can be had from
+ http://askdonald.ask.uni-karlsruhe.de/hppd/hpux/Networking/WWW/Man2html-1.05
+ (http://askdonald.ask.uni-karlsruhe.de/hppd/hpux/Networking/WWW/Man2html-1.05).
+
+ The website will build without bib converter utility, but you will
+ not see our hypertextified bibliography.
+
+ * texinfo (a development release) The documentation will build with
+ texinfo-4.0, but if you want split html pages, you're best off
+ using the lates pretest version from texinfo-4.0b
+ (ftp://texinfo.org/texinfo/pretests/texinfo-4.0b.tar.gz) or
+ texinfo-4.0b (ftp://alpha.gnu.org/gnu/texinfo-4.0b.tar.gz)
+
+Building LilyPond
+==================
+
+ to install GNU LilyPond, type:
+ gunzip -c lilypond-x.y.z | tar xf -
+ cd lilypond-x.y.z
+ ./configure # run with --help to see appropriate options
+ make
+ make install
+ sh buildscripts/clean-fonts.sh
+
+ If you are doing an upgrade, you should remove all `feta' `.pk' and
+`.tfm' files. A script has been provided to do the work for you, see
+`buildscripts/clean-fonts.sh'.
+
+ If you are not root, you should choose a `--prefix' argument that
+points into your home directory, eg.
+
+ ./configure --prefix=$HOME/usr
+
+ In this case, you have to insert the contents of
+`buildscripts/out/lilypond-login' or
+`buildscripts/out/lilypond-profile' into your start up scripts by hand.
+
+Configuring for multiple platforms
+----------------------------------
+
+ If you want to build multiple versions of LilyPond with different
+configuration settings, you can use the `--enable-config=CONF' option
+of configure. You should use `make conf=CONF' to generate the output
+in `out-CONF'. Example: suppose I want to build with and without
+profiling. Then I'd use the following for the normal build,
+
+ ./configure --prefix=~ --enable-checking
+ make
+ make install
+
+ and for the profiling version, I specify a different configuration.
+
+
+ ./configure --prefix=~ --enable-profiling --enable-config=prof --disable-checking
+ make conf=prof
+ make conf=prof install
+
+Emacs mode
+==========
+
+ An Emacs mode for entering music and running LilyPond is included
+with the source archive as `lilypond-mode.el' and
+`lilypond-font-lock.el'. You should install these files somewhere in
+your LOAD-PATH. If you have installed a precompiled LilyPond package,
+these files can be found in `/usr/share/doc/lilypond-x.y.z/'.
+
+ Add this to your `~/.emacs' or `~/.emacs.el', or install this file
+in Emacs' `site-start.d':
+ ;;; lilypond-init.el --- Startup code for LilyPond mode
+
+ (load-library "lilypond-mode.el")
+ (setq auto-mode-alist
+ (cons '("\\.ly$" . LilyPond-mode) auto-mode-alist))
+ (add-hook 'LilyPond-mode-hook (lambda () (turn-on-font-lock)))
+
+ If you have the latest LilyPond-1.4.x Debian package, LilyPond-mode
+is automatically loaded, you not even need to modify your `~/.emacs'
+file.
+
+Compiling for distributions
+===========================
+
+Red Hat Linux
+-------------
+
+ Red Hat 7.0 i386 RPMS are available from
+`ftp://ftp.cs.uu.nl/pub/GNU/LilyPond/binaries/'.
+
+ You can also compile them yourself. A spec file is in
+`make/out/lilypond.redhat.spec'. This file is distributed along with
+the sources. You can make the rpm by issuing
+
+ tar xfz lilypond-x.y.z.tar.gz
+ rpm -bb lilypond-x.y.z/make/out/lilypond.redhat.spec
+ rpm -i /usr/src/redhat/RPMS/i386/lilypond-x.y.z
+
+ For running on a Red Hat system you need these packages: guile,
+tetex, tetex-latex, tetex-dvips, libstdc++, python, ghostscript.
+
+ For compilation on a Red Hat system you need these packages, in
+addition to the those needed for running: glibc-devel, gcc-c++,
+libstdc++-devel, guile-devel, flex, bison, texinfo, tetex-devel, groff,
+libgr-progs.
+
+LinuxPPC
+--------
+
+ Some LinuxPPC RPMS should available from
+`ftp://ftp.cs.uu.nl/pub/GNU/LilyPond/binaries/'.
+
+ A LinuxPPC RPM can be made using the `lilypond.redhat.spec' file.
+
+SuSE
+----
+
+ Some SUSE RPMS should available from
+`ftp://ftp.lilypond.org/pub/LilyPond/binaries/SuSE'.
+
+ You can also compile a RPM for SUSE yourself. A spec file is in
+`make/out/lilypond.suse.spec', see the instructions for building the
+Red Hat RPM.
+
+ You must have the following packages: guile tcsh tetex te_latex
+te_kpath te_mpost libpng python gpp libgpp gettext autoconf netpbm
+libnetpb gs_serv gs_lib gs_fonts guile
+
+Slackware
+---------
+
+ No precompiled packages for Slackware are available.
+
+ Problems have been reported with Slackware 7.0; apparently, it ships
+with a faulty compiler. Do not compile LilyPond with -O2 on this
+platform.
+
+Mandrake
+--------
-If you want to auto-generate Lily's website, you'll need some additional
-conversion tools.
+ Some binaries are available at rpmfind.net. Refer to
+`http://rpmfind.net/linux/mandrake/cooker/contrib/RPMS/'.
-o xpmtoppm (from the Portable Bitmap Utilities) (For RedHat Linux
- users: it is included within the package libgr-progs).
- the original is at
-ftp://ftp.x.org/contrib/utilities/netpbm-1mar1994.p1.tar.gz
+ You can also compile a RPM for Mandrake yourself. A spec file is in
+`make/out/lilypond.mandrake.spec', see the instructions for building
+the Red Hat RPM.
-o pnmtopng, which is also in libgr-progs for RedHat. The original is
-at
-ftp://swrinde.nde.swri.edu/pub/png/applications/pnmtopng-2.37.2.tar.gz.i
+Debian GNU/Linux
+----------------
-The version of pnmtopng that is distributed with RedHat 5.1 and
-5.2 contains a bug: pnmtopng is dynamically linked to the wrong
-version of libpng. Recompile it from source, and make sure that the
-pnmtopng binary is linked statically to the libpng that is included in
-libgr. RedHat 6.0 does not have this problem.
+ A Debian package is also available. You may install it easily by
+running `apt-get' as root:
- tar xzf libgr-2.0.13.tar.gz
- make
- cd png
- rm libpng.so*
- make pnmtopng
+ apt-get install lilypond lilypond-doc
-You can then install the new pnmtopng into /usr/local/bin/
+ You can also compile the .deb for Debian yourself, do:
-o Bib2html http://pertsserver.cs.uiuc.edu/~hull/bib2html.
- Which, in turn depends on man2html for proper installation.
-man2html can be had from http://askdonald.ask.uni-karlsruhe.de/hppd/hpux/Networking/WWW/Man2html-1.05.
+ apt-get -b source lilypond
- TeTeX users should not forget to rerun texhash.
+ If you're real impatient, you may even do:
-You also have to install buildscripts/out/ps-to-gifs in a
-directory that is in the path.
+ cd lilypond-x.y.z # a previous version
+ uscan # download and build latest directly from upstream
-6: CONFIGURING and COMPILING
+ Debian's TeX installation is a bit short on memory, you may want to
+increase it like this:
+ --- /etc/texmf/texmf.cnf.dpkg Sun Jan 28 14:12:14 2001
+ +++ /etc/texmf/texmf.cnf Fri Apr 27 11:09:35 2001
+ @ -384,8 +384,8 @
+ main_memory.context = 1500000
+ main_memory.mpost = 1000000
+ main_memory = 263000 % words of inimemory available; also applies to inimf&mp
+ -extra_mem_top = 0 % extra high memory for chars, tokens, etc.
+ -extra_mem_bot = 0 % extra low memory for boxes, glue, breakpoints, etc.
+ +extra_mem_top = 100000 % extra high memory for chars, tokens, etc.
+ +extra_mem_bot = 100000 % extra low memory for boxes, glue, breakpoints, etc.
+
+ obj_tab_size.context = 256000
-to install GNU LilyPond, simply type:
+ You could also export `extra_mem_top' and `extra_mem_bot' as
+environment variables if you do not want to or cannot modify
+`/etc/texmf/texmf.cnf'.
- gunzip -c lilypond-x.y.z | tar xf -
- cd lilypond-x.y.z
- ./configure # fill in your standard prefix with --prefix
- make
- make install
+ Alternatively, visit
-This will install a number of files, something close to:
+ * http://packages.debian.org/lilypond
+ (http://packages.debian.org/lilypond)
- /usr/local/man/man1/mi2mu.1
- /usr/local/man/man1/convert-mudela.1
- /usr/local/man/man1/mudela-book.1
- /usr/local/man/man1/lilypond.1
- /usr/local/bin/lilypond
- /usr/local/bin/mi2mu
- /usr/local/share/lilypond/*
- /usr/local/share/locale/{it,nl}/LC_MESSAGES/lilypond.mo
+ * http://people.debian.org/~foka/lilypond/
+ (http://people.debian.org/~foka/lilypond/) for latest
+ semi-unofficial build of LilyPond 1.4.2 for Debian 2.2 (potato)
+ users. The official stable Debian 2.2 is stuck with the old
+ LilyPond-1.3.24. Since LilyPond-1.4 has been released, the older
+ lilypond1.3 Debian package is now obsolete.
-The above assumes that you are root and have the GNU development
-tools, and your make is GNU make. If this is not the case, you can
-adjust your environment variables to your taste:
+ Please contact Anthony Fok <lilypond@packages.debian.org> for more
+information.
- export CPPFLAGS="-I /home/me/my_include -DWEIRD_FOOBAR"
- ./configure
+ The build scripts are in the subdirectory `debian/'; you can make
+the .deb by doing, for example:
-CPPFLAGS are the preprocessor flags.
+ $ su - root
+ # dpkg --purge lilypond lilypond1.3
+ # exit
+ $ tar xzf lilypond-1.4.3.tar.gz
+ $ cd lilypond-1.4.3
+ $ dch -p -v 1.4.3-0.local.1 "Local build."
+ $ debuild -B
+ $ su - root
+ # dpkg -i ../lilypond_1.4.3*.deb
+ # exit
+ $
-The configure script is Cygnus configure, and it will accept
---help. If you are not root, you will probably have to make it
-with a different --prefix option. Our favourite location is
+ Use command `debuild' instead of `debuild -B' if you have a very
+fast machine and want to build the HTML, PS and DVI documentation too.
- ./configure --prefix=$HOME/usr
+ For compilation on a Debian GNU/Linux system you need these packages,
+in addition to the those needed for running:
-In this case, you will have to set up MFINPUTS, and TEXINPUTS accordingly.
+ * g++, cpp, libc6-dev, libstdc++<YOUR-LIBSTDC++-VERSION-HERE>-dev
-Since GNU LilyPond currently is beta, you are advised to also use
+ * libguile<YOUR-LIBGUILE-VERSION-HERE>-dev
- --enable-debugging
- --enable-checking
+ * make, m4, flex, bison
-Options to configure include:
+ * gettext
-o --enable-printing
- Enable debugging print routines (lilypond -D option)
-o --enable-optimise
- Set maximum optimisation: compile with -O2. This can be
-unreliable on some compiler/platform combinations (eg, DEC Alpha and PPC)
-o --enable-profiling
- Compile with support for profiling.
-o --enable-config
- Output to a different configuration file. Needed for multi-platform
- builds
+ * groff, texinfo
-All options are documented in the configure help
-The option --enable-optimise is recommended for Real Life usage.
+ * bibtex2html (not in Debian 2.2)
-If you do
+ * tetex-base, tetex-bin, tetex-extra, libkpathsea-dev or tetex-dev
- make all
+ * dpkg-dev, debhelper, fakeroot
-everything will be compiled, but nothing will be installed. The
-resulting binaries can be found in the subdirectories out/ (which
-contain all files generated during compilation).
+ * gs, netpbm
-7: CONFIGURING FOR MULTIPLE PLATFORMS
+ * pnmtopng (only in Debian 2.2; pnmtopng has been merged with netpbm
+ in Debian testing/unstable.)
-If you want to compile LilyPond with different configuration settings,
-then, you can use the --enable-config option. Example: suppose I
-want to build with and without profiling. Then I'd use the
-following for the normal build,
+ Most of these are listed on the `Build-Depends' line in the
+`debian/control' file. To ensure the creation of the lilypond deb is
+trouble-free, we recommend that you first install the following packages
+by running \`apt-get' as root before building the package:
- ./configure --prefix=~ --disable-optimise --enable-checking
- make
- make install
+ For Debian 2.2:
-and for the profiling version, I specify a different configuration.
+ apt-get install task-debian-devel task-c++-dev \
+ python-base libguile6-dev tetex-bin tetex-dev \
+ tetex-extra flex bison texinfo groff gs \
+ netpbm pnmtopng m4 gettext
- ./configure --prefix=~ --enable-profiling --enable-config=optprof --enable-optimise --disable-checking
- make config=optprof
- make config=optprof install
+ For Debian in development ("unstable", the future 2.3 or 3.0):
-8: INSTALLING
+ apt-get install binutils cpp gcc libc6-dev \
+ g++ libstdc++2.10-dev \
+ python-base libguile-dev tetex-bin libkpathsea-dev \
+ tetex-extra flex bison texinfo bibtex2html groff gs \
+ netpbm m4 gettext
-If you have done a successful make, then a simple
+ And, just so that old fonts from previous versions of LilyPond won't
+interfere with your build, you may want to do this before the build too:
- make install
+ dpkg --purge lilypond lilypond1.3
-should do the trick.
+Problems
+========
-If you are doing an upgrade, please remember to remove obsolete
-.pk and .tfm files of the fonts. A script has been
-provided to do the work for you, see bin/clean-fonts.sh.
+ For help and questions use <lilypond-user@gnu.org>. Please consult
+the FAQ before mailing your problems. If you find bugs, please send
+bug reports to <bug-lilypond@gnu.org>.
-CAVEATS
+ Bugs that are not fault of LilyPond are documented here.
-o The -O2 option triggers bugs on various platforms (PowerPC, Alpha).
- If you experience problems, you should first try turning off
- this.
-o On PPC you need at least EGCS-1.1.2f.
+FLex-2.5.4a and gcc-3.0
+-----------------------
-EXAMPLE
+ Flex 2.5.4a does not produce g++-3.0 compliant C++ code. To compile
+LilyPond with gcc-3.0 you may do:
-This is what I type in my xterm:
+ CC=gcc-3.0 CXX=g++-3.0 ./configure --enable-config=gcc-3.0
+ make conf=gcc-3.0 -C lily out-gcc-3.0/lexer.cc
+ patch -p1 < lexer-gcc-3.0.patch
+ make conf=gcc-3.0 -C lily
- lilypond someinput.ly
- tex someinput.tex
- xdvi someinput&
+ Note that this is fixed in Debian/unstable for flex >= 2.5.4a-13.
-This is what the output looks like over here:
+NetBSD
+------
- GNU LilyPond 0.0.78 #4/FlowerLib 1.1.24 #0
- Parsing ... [/home/hw/share/lilypond/init//
- <..etc..>
- init//performer.ly]]][input/kortjakje.ly]
- Creating elements ...[8][16][24][25]
- Preprocessing elements...
- Calculating column positions ... [14][25]
- Postprocessing elements...
- TeX output to someinput.tex ...
- Creating MIDI elements ...MIDI output to someinput.midi ...
+ * The flex precompiled in NetBSD-1.4.2 is broken. Download
+ flex-2.5.4a, build, install.
- hw:~/musix/spacer$ xdvi someinput&
- [1] 855
+ * The configuration of Gcc (egcs-2.91.60 19981201 (egcs-1.1.1
+ release)) does not include `/usr/pkg' paths. Configure using:
-Check out the input files, some of them have comments
-Please refer to the man page for more information.
+ CFLAGS='-I /usr/pkg/include' LDFLAGS='-L/usr/pkg/lib' ./configure
-9: REDHAT LINUX
-RedHat Linux users can compile an RPM. A spec file is in
-make/out/lilypond.spec, it is distributed along with the
-sources.
+Solaris:
+--------
-You can make the rpm by issuing
+ * Sparc64/Solaris 2.6, GNU make-3.77
- rpm -tb lilypond-x.y.z.tar.gz
- rpm -i /usr/src/redhat/RPMS/i386/lilypond-x.y.z
+ GNU make-3.77 is buggy on this platform, upgrade to 3.78.1 or
+ newer.
-Precompiled i386 RedHat RPMS are available from
-http://linux.umbc.edu/software/lilypond/rpms/.
+ * Sparc64/Solaris 2.6, ld
-10: DEBIAN GNU/LINUX
+ Not yet resolved.
-A Debian package is also available; contact Anthony Fok
-foka@debian.org. The build scripts are in the subdirectory
-debian/.
+AIX
+---
-11: WINDOWS NT/95
+ * AIX 4.3 ld
-Separate instructions on building for W32 are avaible
-in the file README-W32.yo.
+ The following is from the gcc install/SPECIFIC file.
+ Some versions of the AIX binder (linker) can fail with a
+ relocation overflow severe error when the -bbigtoc option
+ is used to link GCC-produced object files into an
+ executable that overflows the TOC. A fix for APAR IX75823
+ (OVERFLOW DURING LINK WHEN USING GCC AND -BBIGTOC) is
+ available from IBM Customer Support and from its
+ 27service.boulder.ibm.com website as PTF U455193.
-12: AUTHORS
+ Binutils does not support AIX 4.3 (at least through release
+ 2.9). GNU as and GNU ld will not work properly and one
+ should not configure GCC to use those GNU utilities. Use
+ the native AIX tools which do interoperate with GCC.
-Han-Wen Nienhuys <hanwen@cs.uu.nl>
+ add -Wl,-bbigtoc to USER_LDFLAGS, ie:
+ LDFLAGS='-Wl,-bbigtoc' ./configure
-Jan Nieuwenhuizen <janneke@gnu.org>
-Have fun!