INSTALL - compiling and installing GNU LilyPond
***********************************************
+Abstract
+========
+
+ This document explains what you need to install LilyPond, and what
+you should do. If you are going to compile and install LilyPond often,
+e.g. when doing development, you might want to check out the
+`buildscripts/set-lily.sh' script. It sets some environment variables
+and symlinks, which comes in handly when you have to compile LilyPond
+more often.
+
Obtaining
=========
ftp://ftp.cs.uu.nl/pub/GNU/LilyPond/
(ftp://ftp.cs.uu.nl/pub/GNU/LilyPond/).
- There are three options for downloading sources.
-
- * if you don't have any version, then you can download the entire
- `.tar.gz' file.
+ _If you upgrade by patching do remember to rerun autoconf after
+applying the patch_.
- * if you have an unpacked source tree of a previous version, you
- may use the diffs .
+ If you do not want to download the entire archive for each version,
+the safest method for upgrading is to use `xdelta', see
+`ftp://ftp.xcf.berkeley.edu/pub/xdelta/'.
- _If you upgrade by patching do remember to rerun autoconf after
- applying the patch_.
+ The following command produces `lilypond-1.1.55.tar.gz' from
+`lilypond-1.1.54' identical (up to compression dates) to the .55 on the
+FTP site.
+ xdelta patch lilypond-1.1.54-1.1.55.xd lilypond-1.1.54.tar.gz
- * if you have the `.tar.gz' file of a previous release, you can use
- xdelta (ftp://ftp.xcf.berkeley.edu/pub/xdelta/). This is much
- safer than using normal diffs, and is the recommended way.
-
- The following command produces `lilypond-1.3.122.tar.gz' from
- `lilypond-1.3.121' identical (up to compression dates) to the .122
- on the FTP site.
- xdelta patch lilypond-1.3.121-1.3.122.xd lilypond-1.3.121.tar.gz
-
-Build requirements
-==================
+Prerequisites
+=============
- This document describes how to build LilyPond on Unix platforms. It
-is also known to run and compile on Windows NT/95/98 as well. More
-information on this topic can be found at Jan's windows page
-(http://appel.lilypond.org/lilypond/gnu-windows/).
+ For compilation you need:
- You need the following packages to compile Lilypond.
+ * A GNU system: GNU LilyPond is known to run on these GNU systems:
+ Linux (PPC, intel), FreeBSD, AIX, NeXTStep, IRIX, Digital Unix
+ and Solaris.
- * A reasonably new C++ compiler: EGCS 1.1, GCC 2.95.2 or newer.
- Check out the gcc site (ftp://ftp.gnu.org/gnu/gcc/).
+ * Lots of disk space: LilyPond takes between 30 and 100 mb to
+ compile if you use debugging information. If you are short on
+ disk-space run configure with `--disable-debugging'.
- * Python 1.5, Check out the python website (http://www.python.org).
+ * Although we recommend to use Unix, LilyPond is known to run on
+ Windows NT/95/98 as well. See Section Windows NT/95,es.
- * GUILE 1.3.4 or newer, check out the GUILE webpage
- (http://www.gnu.org/software/guile/guile.html). Version 1.4 is
- recommended for better performance.
+ * EGCS 1.1 or newer. Check out `ftp://ftp.gnu.org/pub/gcc/'.
- * GNU Make. Check out the GNU make FTP directory
- (ftp://ftp.gnu.org/gnu/make/).
+ * Python 1.5, Check out `ftp://ftp.python.org' or
+ `ftp://ftp.cwi.nl/pub/python'.
- * Flex (version 2.5.4a or newer). Check out the Flex webpage
- (http://www.gnu.org/software/flex/).
+ * GUILE 1.3.4, check out
+ http://www.gnu.org/software/guile/guile.html
+ (http://www.gnu.org/software/guile/guile.html).
- * Bison (version 1.25 or newer). Check out the bison webpage
- (http://www.gnu.org/software/bison/)
+ * GNU make. Check out ftp://ftp.gnu.org/make/
+ (ftp://ftp.gnu.org/make/).
- * TeX.
+ * Flex (version 2.5.4 or newer). Check out ftp://ftp.gnu.org/flex/
+ (ftp://ftp.gnu.org/flex/).
- If you want LilyPond to use kpathsea support (recommended), make
- sure you have tetex 1.0 or newer (1.0.6 is known to work). You
- may need to install a tetex-devel or tetex-dev package too.
+ * Bison (version 1.25 or newer). Check out ftp://ftp.gnu.org/bison/
+ (ftp://ftp.gnu.org/bison/).
- * Texinfo (version 4.0 or newer). The documentation of lily is
- written in texinfo. Check out the texinfo FTP directory
- (ftp://ftp.gnu.org/gnu/texinfo/).
+ * Texinfo. Check out ftp://ftp.gnu.org/pub/texinfo/
+ (ftp://ftp.gnu.org/pub/texinfo/). Most documentation is in
+ texinfo.
- * The geometry package for LaTeX is needed to use ly2dvi. It is
- available at the FTP directory for `geometry'
- (ftp://ftp.ctan.org/tex-archive/macros/latex/contrib/supported/geometry).
- This package is normally included with the TeX distribution.
+ * The geometry package for LaTeX is needed to use ly2dvi. Available
+ at
+ ftp://ftp.ctan.org/tex-archive/macros/latex/contrib/supported/geometry
+ (ftp://ftp.ctan.org/tex-archive/macros/latex/contrib/supported/geometry)
+ or at mirror site ftp://ftp.dante.de (ftp://ftp.dante.de)
- * MetaPost, needed for generating PostScript fonts. Please note that
- tetex-0.4pl8 (included with Red Hat 5.x) does not include
- `mfplain.mp', which is needed for producing the scalable font
+ * MetaPost, if you want to use direct PostScript output. Please note
+ that tetex-0.4pl8 (included with Redhat 5.x) does not include
+ `mfplain.mp', which is needed for producing the scaleable font
files.
- If you don't have MetaPost and don't want to use PostScript
- output, then edit `mf/GNUmakefile', removing the line saying
- `PFA_FILES='.
- * kpathsea, a library for searching (TeX) files. `kpathsea' is
- usually included with your installation of TeX.
-
-
-Running requirements
-====================
+Running
+=======
GNU LilyPond does use a lot of resources. For operation you need the
following software
- * TeX.
+ * TeX
- * Xdvi and ghostscript
+ * A PostScript printer and/or viewer (such as Ghostscript) is
+ strongly recommended. Xdvi will show all embedded PostScript
+ too if you have Ghostscript installed.
- * GUILE 1.3.4, or newer. Check out the GUILE webpage
- (http://www.gnu.org/software/guile.html)
+ * GUILE 1.3.4, check out http://www.gnu.org/software/guile/
+ (http://www.gnu.org/programs/guile.html)
For running LilyPond successfully you have to help TeX and MetaFont
find various files. The recommended way of doing so is adjusting the
-environment variables in the start-up scripts of your shell. Appropriate
-Csh and bourne sh scripts are left in
-`buildscripts/out/lilypond-profile' and
-`buildscripts/out/lilypond-login' after compilation.
+environment variables in the start-up scripts of your shell. An
+example is given here for the Bourne shell:
+ export MFINPUTS="/usr/local/share/lilypond/mf:"
+ export TEXINPUTS="/usr/local/share/lilypond/tex:/usr/local/share/lilypond/ps:"
- LilyPond is a big and slow program. A fast CPU and plenty of RAM is
-recommended for comfortable use.
+ The empty path component represents TeX and MetaFont's default
+search paths. Scripts with the proper paths for the bourne and C-shell
+respectively are generated in `buildscripts/out/lilypond-profile' and
+`buildscripts/out/lilypond-login' during compilation.
-Website requirements
-====================
+ LilyPond is a hiddeously big, slow and bloated program. A fast CPU
+and plenty of RAM is recommended for comfortable use.
- The documentation comes in the form of a website. You can view this
-website on the internet, but you can also build it locally. This process
-requires a successful compile of lilypond. The website is built by
-issuing
+Website
+=======
- make web-doc
+ The website is the most convenient form to use for reading the
+documentation on-line documentation. It is made by entering
- Building the website requires some additional tools:
+ make website
+ This does require a fully functioning
- * xpmtoppm (from the netpbm package: the Portable Bitmap Utilities).
- The original is at the netpbm FTP site
- (ftp://ftp.x.org/contrib/utilities/netpbm-1mar1994.p1.tar.gz)
+ If you want to auto-generate Lily's website, you'll need some
+additional conversion tools.
- * pnmtopng. The original is at in the pnmtopng FTP site
- (ftp://swrinde.nde.swri.edu/pub/png/applications/pnmtopng-2.37.2.tar.gz).
+ * xpmtoppm (from the Portable Bitmap Utilities) (For RedHat Linux
+ users: it is included within the package libgr-progs).
+ the original is at
+ ftp://ftp.x.org/contrib/utilities/netpbm-1mar1994.p1.tar.gz
+ (ftp://ftp.x.org/contrib/utilities/netpbm-1mar1994.p1.tar.gz)
- * Bibtex2html (http://www.lri.fr/~filliatr/ftp/bibtex2html/), or
- Bib2html (http://www.uni-koblenz.de/ag-ki/ftp/bib2html/).
- Bibtex2html is available in debian, while bib2html is in some rpm
- based distributions. Bib2html, in turn depends on man2html for
- proper installation. man2html can be had from
+ * pnmtopng, which is also in libgr-progs for RedHat. The original is
+ at
+ ftp://swrinde.nde.swri.edu/pub/png/applications/pnmtopng-2.37.2.tar.gz
+ (ftp://swrinde.nde.swri.edu/pub/png/applications/pnmtopng-2.37.2.tar.gz).i
+
+ The version of `pnmtopng' that is distributed with RedHat 5.1 and
+ 5.2 contains a bug: pnmtopng is dynamically linked to the wrong
+ version of libpng, which results in cropped images. Recompile it
+ from source, and make sure that the pnmtopng binary is linked
+ statically to the libpng that is included in libgr. RedHat 6.0
+ does not have this problem.
+
+ tar xzf libgr-2.0.13.tar.gz
+ make
+ cd png
+ rm libpng.so*
+ make pnmtopng
+
+ You can then install the new pnmtopng into `/usr/local/bin/'
+
+ * Bib2html http://pertsserver.cs.uiuc.edu/~hull/bib2html.
+ (http://pertsserver.cs.uiuc.edu/~hull/bib2html.) Which, in
+ turn depends on man2html for proper installation. man2html can be
+ had from
http://askdonald.ask.uni-karlsruhe.de/hppd/hpux/Networking/WWW/Man2html-1.05
(http://askdonald.ask.uni-karlsruhe.de/hppd/hpux/Networking/WWW/Man2html-1.05).
- The website will build without bib converter utility, but you will
- not see our hypertextified bibliography.
+ The website will build without this utility, but you will not see
+ our hypertextified bibliography.
+
+ * Doc++ (optional) to read the source code.
Configuring and compiling
=========================
- to install GNU LilyPond, type:
+ to install GNU LilyPond, simply type:
+
gunzip -c lilypond-x.y.z | tar xf -
cd lilypond-x.y.z
- ./configure # run with --help to see appropriate options
+ ./configure # fill in your standard prefix with --prefix
make
make install
- sh buildscripts/clean-fonts.sh
- If you are doing an upgrade, you should remove all `feta' `.pk' and
-`.tfm' files. A script has been provided to do the work for you, see
-`buildscripts/clean-fonts.sh'.
+ This will install a number of files, something close to:
- If you are not root, you should choose a `--prefix' argument that
-points into your home directory, eg.
+ /usr/local/man/man1/mi2mu.1
+ /usr/local/man/man1/convert-mudela.1
+ /usr/local/man/man1/mudela-book.1
+ /usr/local/man/man1/lilypond.1
+ /usr/local/bin/lilypond
+ /usr/local/bin/mi2mu
+ /usr/local/bin/convert-mudela
+ /usr/local/bin/mudela-book
+ /usr/local/bin/abc2ly
+ /usr/local/share/lilypond/*
+ /usr/local/share/locale/{it,nl}/LC_MESSAGES/lilypond.mo
- ./configure --prefix=$HOME/usr
+ The above assumes that you are root and have the GNU development
+tools, and your make is GNU make. If this is not the case, you can
+adjust your environment variables to your taste:
- In this case, you have to insert the contents of
-`buildscripts/out/lilypond-login' or
-`buildscripts/out/lilypond-profile' into your start up scripts by hand.
-Configuring for multiple platforms
-==================================
+ export CPPFLAGS="-I /home/me/my_include -DWEIRD_FOOBAR"
+ ./configure
- If you want to build multiple versions of LilyPond with different
-configuration settings, you can use the `--enable-config=CONF' option
-of configure. You should use `make conf=CONF' to generate the output
-in `out-CONF'. Example: suppose I want to build with and without
-profiling. Then I'd use the following for the normal build,
+ `CPPFLAGS' are the preprocessor flags.
- ./configure --prefix=~ --enable-checking
- make
- make install
+ The configure script is Cygnus configure, and it will accept
+`--help'. If you are not root, you will probably have to make it with a
+different `--prefix' option. Our favourite location is
- and for the profiling version, I specify a different configuration.
+ ./configure --prefix=$HOME/usr
- ./configure --prefix=~ --enable-profiling --enable-config=prof --disable-checking
- make conf=prof
- make conf=prof install
+ In this case, you will have to set up MFINPUTS, and TEXINPUTS
+accordingly.
-Emacs mode
-==========
+ Since GNU LilyPond currently is beta, you are advised to also use
- An emacs mode for LilyPond is included with the source archive as
-`lilypond-mode.el' and `lilypond-font-lock.el'. If you have an RPM, it
-is in `/usr/share/doc/lilypond-X/'. You have to install it yourself.
- Add this to your ~/.emacs or ~/.emacs.el:
- (load-library "lilypond-mode.el")
- (setq auto-mode-alist
- (cons '("\\.ly$" . LilyPond-mode) auto-mode-alist))
- (add-hook 'LilyPond-mode-hook (lambda () (turn-on-font-lock)))
+ --enable-debugging
+ --enable-checking
- If you have the latest LilyPond-1.3.x Debian package, LilyPond-mode
-is automatically loaded, so you need not modify your `~/.emacs' file.
+ Options to configure include:
-Red Hat Linux
-=============
+``--enable-printing''
+ Enable debugging print routines (lilypond `-D' option)
- Red Hat 7.0 i386 RPMS are available from
-`ftp://ftp.cs.uu.nl/pub/GNU/LilyPond/RedHat/'.
+``--enable-optimise''
+ Set maximum optimisation: compile with `-O2'. This can be
+ unreliable on some compiler/platform combinations (eg, DEC Alpha
+ and PPC)
- You can also compile them yourself. A spec file is in
-`make/out/lilypond.spec'. This file is distributed along with the
-sources. You can make the rpm by issuing
+``--enable-profiling''
+ Compile with support for profiling.
- rpm -tb lilypond-x.y.z.tar.gz
- rpm -i /usr/src/redhat/RPMS/i386/lilypond-x.y.z
+``--enable-config''
+ Output to a different configuration file. Needed for
+ multi-platform builds
- For running on a Red Hat system you need these packages: guile,
-tetex, tetex-dvips, libstdc++, python, ghostscript.
+ All options are documented in the `configure' help The option
+`--enable-optimise' is recommended for Real Life usage.
- For compilation on a Red Hat system you need these packages, in
-addition to the those needed for running: glibc-devel, gcc-c++,
-libstdc++-devel, guile-devel, flex, bison, texinfo, tetex-devel, groff,
-libgr-progs.
+ If you do
-SuSE
-====
- [TODO: document this]
+ make all
- Install `tetex', `te_mpost', `te_kpath'.
+ everything will be compiled, but nothing will be installed. The
+resulting binaries can be found in the subdirectories `out/' (which
+contain all files generated during compilation).
-Mandrake
-========
+Configuring for multiple platforms
+==================================
- [TODO]
+ If you want to compile LilyPond with different configuration
+settings, then, you can use the `--enable-config' option. Example:
+suppose I want to build with and without profiling. Then I'd use the
+following for the normal build,
-Debian GNU/Linux
-================
- A Debian package is also available. You may install it easily by
-using apt-get as root:
+ ./configure --prefix=~ --disable-optimise --enable-checking
+ make
+ make install
- apt-get install lilypond1.3
+ and for the profiling version, I specify a different configuration.
- Alternatively, visit
- * http://packages.debian.org/lilypond
- (http://packages.debian.org/lilypond)
+ ./configure --prefix=~ --enable-profiling --enable-config=optprof --enable-optimise --disable-checking
+ make config=optprof
+ make config=optprof install
- * http://ftp.debian.org/debian/pool/main/l/lilypond1.3/
- (http://ftp.debian.org/debian/pool/main/l/lilypond1.3/) for latest
- package uploaded to Debian unstable;
+Installing
+==========
- * http://people.debian.org/~foka/lilypond/
- (http://people.debian.org/~foka/lilypond/) for latest
- semi-unofficial build of LilyPond 1.3.121 for Debian 2.2r2
- (potato) users. The official stable Debian 2.2r2 is stuck with
- the old LilyPond-1.3.24.
+ if you have done a successful `make', then a simple
- You may contact Anthony Fok <foka@debian.org> for more information.
- The build scripts are in the subdirectory `debian/'; you can make
-the .deb by doing, for example:
+ make install
- $ su - root
- # dpkg --purge lilypond lilypond1.3
- # exit
- $ tar xzf lilypond-1.3.122.tar.gz
- $ cd lilypond-1.3.122
- $ dch -p -v 1.3.122-0.local.1 "Local build."
- $ debuild
- $ su - root
- # dpkg -i ../lilypond1.3_1.3.122*.deb
- # exit
- $
+ should do the trick.
- For compilation on a Debian GNU/Linux system you need these packages,
-in addition to the those needed for running:
+ If you are doing an upgrade, please remember to remove obsolete
+`.pk' and `.tfm' files of the fonts. A script has been provided to do
+the work for you, see `bin/clean-fonts.sh'.
- * g++, cpp, libc6-dev, libstdc++<your-libstdc++-version-here>-dev
+Redhat linux
+============
- * libguile<your-libguile-version-here>-dev
+ RedHat Linux users can compile an RPM. A spec file is in
+`make/out/lilypond.spec', it is distributed along with the sources.
- * make, m4, flex, bison
+ You can make the rpm by issuing
- * gettext
+ rpm -tb lilypond-x.y.z.tar.gz
+ rpm -i /usr/src/redhat/RPMS/i386/lilypond-x.y.z
- * groff, texinfo, bibtex2html (not in 2.2r2)
+ Precompiled i386 RedHat RPMS are available from
+ftp://freshmeat.net/pub/rpms/lilypond/
+(ftp://freshmeat.net/pub/rpms/lilypond/) and
+http://linux.umbc.edu/software/lilypond/rpms/
+(http://linux.umbc.edu/software/lilypond/rpms/).
- * tetex-base, tetex-bin, tetex-extra, libkpathsea-dev or tetex-dev
+ For compilation on a RedHat system you need these packages, in
+addition to the those needed for running:
+ * glibc-devel
- * dpkg-dev, debhelper, fakeroot
+ * libstdc++-devel
- * gs, netpbm, pnmtopng
+ * guile-devel
- Most of these are listed on the Build-Depends line in the
-debian/control file. To ensure the creation of the lilypond deb is
-trouble-free, we recommend that you first install the following packages
-before starting dpkg-buildpackage by running apt-get as root.
+ * flex
- For Debian 2.2 (or 2.2r2, 2.2r3):
+ * bison
- apt-get install task-debian-devel task-c++-dev \
- python-base libguile6-dev tetex-bin tetex-dev \
- tetex-extra flex bison texinfo groff gs \
- netpbm pnmtopng m4 gettext
+ * texinfo
- For Debian in development ("unstable", the future 2.3 or 3.0):
+Debian GNU/linux
+================
- apt-get install task-debian-devel task-c++-dev \
- python-base libguile9-dev tetex-bin libkpathsea-dev \
- tetex-extra flex bison texinfo bibtex2html groff gs \
- netpbm pnmtopng m4 gettext
+ A Debian package is also available; contact Anthony Fok
+<foka@debian.org>. The build scripts are in the subdirectory `debian/'.
- And, just so that old fonts from previous versions of LilyPond won't
-interfere with your build, you may want to do this before the build too:
+Windows NT/95
+=============
- dpkg --purge lilypond lilypond1.3
+ Separate instructions on building for W32 are available; See the
+files in `Documentation/ntweb/', included with the sources.
Problems
========
For help and questions use <help-gnu-music@gnu.org> and
<gnu-music-discuss@gnu.org>. Please consult the faq before mailing
-your problems. If you find bugs, please send bug reports to
-<bug-gnu-music@gnu.org>.
+your problems.
+
+ If you find bugs, please send bug reports to <bug-gnu-music@gnu.org>.
+
+ Known bugs that are LilyPond's fault are listed in `TODO', or
+demonstrated in `input/bugs/'.
+
+ Known bugs that are not LilyPond's fault are documented here.
+
+LinuxPPC Bugs:
+**************
+
+ * egcs-1.1.2-12c (stock LinuxPPC R5) has a serious bug, upgrade to
+ fixed in egcs-1.1.2-12f or gcc-2.95-0a,
+ `ftp://dev.linuxppc.org/users/fsirl/R5/RPMS/ppc/'
+
+ * egcs-1.0.2 (LinuxPPC R4): all compiling with `-O2' is suspect, in
+ particular guile-1.3, and Lily herself will break.
+
+Linux-i386
+**********
+
+ * SuSE6.2 and similar platforms (glibc 2.1, libstdc++ 2.9.0)
+
+ Lily will crash during parsing (which suggests a C++ library
+ incompatibility). Precise cause, precise platform description or
+ solution are not known.
+
+ Note that this only happens on some computers with the said
+ platform.
+
+ * libg++ 2.7
+
+ LilyPond occasionally crashes while parsing the initialisation
+ files. This is a very obscure bug, and usually entering the
+ commandline differently "fixes" it.
+
+ lilypond input.ly
+
+ and
+ lilypond -I. ./input.ly
+ makes a difference
+
+ Typical stacktrace:
+ SIGSEGV
+ __libc_malloc (bytes=16384)
+ ?? ()
+ yyFlexLexer::yy_create_buffer ()
+ Includable_lexer::new_input (this=0x8209a00, s={strh_ = {
- Bugs that are not fault of LilyPond are documented here.
+ This behaviour has been observed with machines that have old libg++
+ versions (LinuxPPC feb '98, RedHat 4.x).
Solaris:
********
Some versions of the AIX binder (linker) can fail with a
relocation overflow severe error when the -bbigtoc option
is used to link GCC-produced object files into an
- executable that overflows the TOC. A fix for APAR IX75823
+ executable that overflows the TOC. A fix for APAR IX75823
(OVERFLOW DURING LINK WHEN USING GCC AND -BBIGTOC) is
available from IBM Customer Support and from its
27service.boulder.ibm.com website as PTF U455193.