-Table of Contents
-*****************
-
-
-
-
-INSTALL - compiling and installing GNU LilyPond
- Downloading
- Source code
- Precompiled binaries
- Upgrading
- Requirements
- Compilation
- Running requirements
- Website requirements
- Building LilyPond
- Configuring for multiple platforms
- Emacs mode
- Compiling for distributions
- Red Hat Linux
- LinuxPPC
- SuSE
- Slackware
- Mandrake
- Debian GNU/Linux
- Problems
- FLex-2.5.4a and gcc-3.0
- NetBSD
- Solaris:
- AIX
-
-
INSTALL - compiling and installing GNU LilyPond
***********************************************
- This document describes how to build LilyPond on Unix platforms. It
-is also known to run and compile on Windows NT/95/98 as well. More
-information on this topic can be found at the LilyPond on Windows page
-(http://www.lilypond.org/gnu-windows/).
-
-Downloading
-===========
-
- Even numbered versions are `stable'. The webpages for the stable
-version (1.2) reside on the GNU servers
-(http://www.gnu.org/software/lilypond). Big enhancements go into the
-latest odd numbered version (1.3), whose webpages are on the lilypond
-site (http://www.lilypond.org/).
-
-Source code
------------
-
- If you want to compile LilyPond from source, download here:
- * Download development releases from
- `ftp://ftp.cs.uu.nl/pub/GNU/LilyPond/' by FTP and
- `http://ftp.cs.uu.nl/pub/GNU/LilyPond/', by HTTP.
-
- * `ftp://sca.uwaterloo.ca/pub/' by FTP (Canadian mirror)
-
- * at `lilypond.org' `ftp://ftp.lilypond.org/pub/LilyPond/' by FTP and
- `http://www.lilypond.org/ftp/' by HTTP.
-
- Of course, if your platform supports LilyPond, such as Debian
-GNU/Linux, FreeBSD, OpenBSD or NetBSD, you're encouraged to use the
-native build from source drill.
-
- For Red Hat Linux and SuSE Linux, `.spec' files are included in the
-tarball; see instructions below.
-
-Precompiled binaries
---------------------
-
- If you want to track bleeding edge development, try:
-
- * Debian GNU/Linux
- (ftp://ftp.debian.org/debian/pool/main/l/lilypond/) usually has
- the latest binaries for the most useful stable and development
- versions, while
-
- * Mandrake Cooker
- (http://rpmfind.net/linux/mandrake/cooker/contrib/RPMS/) also
- provides fairly recent versions.
-
- Binaries are made available for other popular platforms, but as we
-need to compile them ourselves, they are not updated for every version
-released.
-
- * Red Hat i386
- (ftp://ftp.cs.uu.nl/pub/GNU/LilyPond/binaries/RedHat/RPMS/)
-
- * SuSE (ftp://ftp.lilypond.org/pub/LilyPond/binaries/SuSE)
-
- * LinuxPPC (ftp://ftp.lilypond.org/pub/LilyPond/binaries/linuxppc/)
-
- * Windows (http://www.lilypond.org/gnu-windows/)
-
-Upgrading
----------
+Abstract
+========
- There are two options for upgrading sources.
+ This document explains what you need to install LilyPond, and what
+you should do. If you are going to compile and install LilyPond often,
+e.g. when doing development, you might want to check out the
+`buildscripts/set-lily.sh' script. It sets some environment variables
+and symlinks, which comes in handly when you have to compile LilyPond
+more often.
- * if you have an unpacked source tree of a previous version, you may
- the patches.
+Obtaining
+=========
- _If you upgrade by patching do remember to rerun autoconf after
- applying the patch_.
+ You can get the latest version of LilyPond at
+ftp://ftp.cs.uu.nl/pub/GNU/LilyPond/
+(ftp://ftp.cs.uu.nl/pub/GNU/LilyPond/).
- * if you have the `.tar.gz' file of a previous release, you can use
- xdelta (ftp://ftp.xcf.berkeley.edu/pub/xdelta/). This is much
- safer than using patches, and is the recommended way.
+ _If you upgrade by patching do remember to rerun autoconf after
+applying the patch_.
- The following command produces `lilypond-1.4.3.tar.gz' from
- `lilypond-1.4.2.tar.gz' identical (up to compression dates) to the
- .3 on the FTP site.
- xdelta patch lilypond-1.4.2-1.4.3.xd lilypond-1.4.2.tar.gz
+ If you do not want to download the entire archive for each version,
+the safest method for upgrading is to use `xdelta', see
+`ftp://ftp.xcf.berkeley.edu/pub/xdelta/'.
-Requirements
-============
+ The following command produces `lilypond-1.1.55.tar.gz' from
+`lilypond-1.1.54' identical (up to compression dates) to the .55 on the
+FTP site.
+ xdelta patch lilypond-1.1.54-1.1.55.xd lilypond-1.1.54.tar.gz
-Compilation
------------
+Prerequisites
+=============
- You need the following packages to compile Lilypond.
+ For compilation you need:
- * A reasonably new C++ compiler: EGCS 1.1, GCC 2.95.2 or newer.
- Check out the gcc site (ftp://ftp.gnu.org/gnu/gcc/).
+ * A GNU system: GNU LilyPond is known to run on these GNU systems:
+ Linux (PPC, intel), FreeBSD, AIX, NeXTStep, IRIX, Digital Unix
+ and Solaris.
- * Python 1.5, Check out the python website (http://www.python.org).
+ * Lots of disk space: LilyPond takes between 30 and 100 mb to
+ compile if you use debugging information. If you are short on
+ disk-space run configure with `--disable-debugging'.
- * GUILE 1.3.4 or newer, check out the GUILE webpage
- (http://www.gnu.org/software/guile/guile.html). Version 1.4 is
- recommended for better performance.
+ * Although we recommend to use Unix, LilyPond is known to run on
+ Windows NT/95/98 as well. See Section Windows NT/95,es.
- * GNU Make. Check out the GNU make FTP directory
- (ftp://ftp.gnu.org/gnu/make/).
+ * EGCS 1.1 or newer. Check out `ftp://ftp.gnu.org/pub/gcc/'.
- * Flex (version 2.5.4a or newer). Check out the Flex webpage
- (http://www.gnu.org/software/flex/).
+ * Python 1.5, Check out `ftp://ftp.python.org' or
+ `ftp://ftp.cwi.nl/pub/python'.
- * Bison (version 1.25 or newer). Check out the bison webpage
- (http://www.gnu.org/software/bison/)
+ * GUILE 1.3.4, check out
+ http://www.gnu.org/software/guile/guile.html
+ (http://www.gnu.org/software/guile/guile.html).
- * TeX.
+ * GNU make. Check out ftp://ftp.gnu.org/make/
+ (ftp://ftp.gnu.org/make/).
- TeX is used as an output backend.
+ * Flex (version 2.5.4 or newer). Check out ftp://ftp.gnu.org/flex/
+ (ftp://ftp.gnu.org/flex/).
- Also, TeX's libkpathsea is used to find the fonts (`.mf', `.afm',
- `.tfm'). Make sure you have tetex 1.0 or newer (1.0.6 is known to
- work). You may need to install a tetex-devel or tetex-dev package
- too.
+ * Bison (version 1.25 or newer). Check out ftp://ftp.gnu.org/bison/
+ (ftp://ftp.gnu.org/bison/).
- * Texinfo (version 4.0 or newer). The documentation of lily is
- written in texinfo. Check out the texinfo FTP directory
- (ftp://ftp.gnu.org/gnu/texinfo/).
+ * Texinfo. Check out ftp://ftp.gnu.org/pub/texinfo/
+ (ftp://ftp.gnu.org/pub/texinfo/). Most documentation is in
+ texinfo.
- * The geometry package for LaTeX is needed to use ly2dvi. It is
- available at the FTP directory for `geometry'
- (ftp://ftp.ctan.org/tex-archive/macros/latex/contrib/supported/geometry).
- This package is normally included with the TeX distribution.
+ * The geometry package for LaTeX is needed to use ly2dvi. Available
+ at
+ ftp://ftp.ctan.org/tex-archive/macros/latex/contrib/supported/geometry
+ (ftp://ftp.ctan.org/tex-archive/macros/latex/contrib/supported/geometry)
+ or at mirror site ftp://ftp.dante.de (ftp://ftp.dante.de)
- * MetaPost, needed for generating PostScript fonts. Please note that
- tetex-0.4pl8 (included with Red Hat 5.x) does not include
- `mfplain.mp', which is needed for producing the scalable font
+ * MetaPost, if you want to use direct PostScript output. Please note
+ that tetex-0.4pl8 (included with Redhat 5.x) does not include
+ `mfplain.mp', which is needed for producing the scaleable font
files.
- If you don't have MetaPost and don't want to use PostScript
- output, then edit `mf/GNUmakefile', removing the line saying
- `PFA_FILES='.
-
- * kpathsea, a library for searching (TeX) files. `kpathsea' is
- usually included with your installation of TeX. You may need to
- install a tetex-devel or tetex-dev package too.
-
- In the very unlikely case that kpathsea is not available for your
- platform (ie, you're not running GNU/Linux, Windows, or any recent
- UNIX), you can compile LilyPond without kpathsea support. In that
- case, you'll probably have to indicate where TeX's tfm files live.
- Invoke configure something like:
- ./configure --without-kpathsea --enable-tfm-path=/usr/share/texmf/fonts/tfm/public/cm/:/usr/share/texmf/fonts/tfm/ams/symbols
-
-
-Running requirements
---------------------
+Running
+=======
GNU LilyPond does use a lot of resources. For operation you need the
following software
- * TeX.
+ * TeX
- * Xdvi and Ghostscript
+ * A PostScript printer and/or viewer (such as Ghostscript) is
+ strongly recommended. Xdvi will show all embedded PostScript
+ too if you have Ghostscript installed.
- * GUILE 1.3.4, or newer. Check out the GUILE webpage
- (http://www.gnu.org/software/guile.html)
+ * GUILE 1.3.4, check out http://www.gnu.org/software/guile/
+ (http://www.gnu.org/programs/guile.html)
For running LilyPond successfully you have to help TeX and MetaFont
find various files. The recommended way of doing so is adjusting the
-environment variables in the start-up scripts of your shell. Appropriate
-Csh and bourne sh scripts are left in
-`buildscripts/out/lilypond-profile' and
-`buildscripts/out/lilypond-login' after compilation.
+environment variables in the start-up scripts of your shell. An
+example is given here for the Bourne shell:
+ export MFINPUTS="/usr/local/share/lilypond/mf:"
+ export TEXINPUTS="/usr/local/share/lilypond/tex:/usr/local/share/lilypond/ps:"
- LilyPond is a big and slow program. A fast CPU and plenty of RAM is
-recommended for comfortable use.
+ The empty path component represents TeX and MetaFont's default
+search paths. Scripts with the proper paths for the bourne and C-shell
+respectively are generated in `buildscripts/out/lilypond-profile' and
+`buildscripts/out/lilypond-login' during compilation.
-Website requirements
---------------------
+ LilyPond is a hiddeously big, slow and bloated program. A fast CPU
+and plenty of RAM is recommended for comfortable use.
- The documentation comes in the form of a website. You can view this
-website on the internet, but you can also build it locally. This process
-requires a successful compile of lilypond. The website is built by
-issuing
+Website
+=======
- make web-doc
+ The website is the most convenient form to use for reading the
+documentation on-line documentation. It is made by entering
- Building the website requires some additional tools:
+ make website
+ This does require a fully functioning
- * xpmtoppm (from the netpbm package: the Portable Bitmap Utilities).
- The original is at the netpbm FTP site
- (ftp://ftp.x.org/contrib/utilities/netpbm-1mar1994.p1.tar.gz)
+ If you want to auto-generate Lily's website, you'll need some
+additional conversion tools.
- * pnmtopng. The original is at in the pnmtopng FTP site
- (ftp://swrinde.nde.swri.edu/pub/png/applications/pnmtopng-2.37.2.tar.gz).
+ * xpmtoppm (from the Portable Bitmap Utilities) (For RedHat Linux
+ users: it is included within the package libgr-progs).
+ the original is at
+ ftp://ftp.x.org/contrib/utilities/netpbm-1mar1994.p1.tar.gz
+ (ftp://ftp.x.org/contrib/utilities/netpbm-1mar1994.p1.tar.gz)
- * Bibtex2html (http://www.lri.fr/~filliatr/ftp/bibtex2html/), or
- Bib2html (http://www.uni-koblenz.de/ag-ki/ftp/bib2html/).
- Bibtex2html is available in debian, while bib2html is in some rpm
- based distributions. Bib2html, in turn depends on man2html for
- proper installation. man2html can be had from
+ * pnmtopng, which is also in libgr-progs for RedHat. The original is
+ at
+ ftp://swrinde.nde.swri.edu/pub/png/applications/pnmtopng-2.37.2.tar.gz
+ (ftp://swrinde.nde.swri.edu/pub/png/applications/pnmtopng-2.37.2.tar.gz).i
+
+ The version of `pnmtopng' that is distributed with RedHat 5.1 and
+ 5.2 contains a bug: pnmtopng is dynamically linked to the wrong
+ version of libpng, which results in cropped images. Recompile it
+ from source, and make sure that the pnmtopng binary is linked
+ statically to the libpng that is included in libgr. RedHat 6.0
+ does not have this problem.
+
+ tar xzf libgr-2.0.13.tar.gz
+ make
+ cd png
+ rm libpng.so*
+ make pnmtopng
+
+ You can then install the new pnmtopng into `/usr/local/bin/'
+
+ * Bib2html http://pertsserver.cs.uiuc.edu/~hull/bib2html.
+ (http://pertsserver.cs.uiuc.edu/~hull/bib2html.) Which, in
+ turn depends on man2html for proper installation. man2html can be
+ had from
http://askdonald.ask.uni-karlsruhe.de/hppd/hpux/Networking/WWW/Man2html-1.05
(http://askdonald.ask.uni-karlsruhe.de/hppd/hpux/Networking/WWW/Man2html-1.05).
- The website will build without bib converter utility, but you will
- not see our hypertextified bibliography.
+ The website will build without this utility, but you will not see
+ our hypertextified bibliography.
- * texinfo (a development release) The documentation will build with
- texinfo-4.0, but if you want split html pages, you're best off
- using the lates pretest version from texinfo-4.0b
- (ftp://texinfo.org/texinfo/pretests/texinfo-4.0b.tar.gz) or
- texinfo-4.0b (ftp://alpha.gnu.org/gnu/texinfo-4.0b.tar.gz)
+ * Doc++ (optional) to read the source code.
-Building LilyPond
-==================
- to install GNU LilyPond, type:
+Configuring and compiling
+=========================
+
+ to install GNU LilyPond, simply type:
+
gunzip -c lilypond-x.y.z | tar xf -
cd lilypond-x.y.z
- ./configure # run with --help to see appropriate options
+ ./configure # fill in your standard prefix with --prefix
make
make install
- sh buildscripts/clean-fonts.sh
-
- If you are doing an upgrade, you should remove all `feta' `.pk' and
-`.tfm' files. A script has been provided to do the work for you, see
-`buildscripts/clean-fonts.sh'.
-
- If you are not root, you should choose a `--prefix' argument that
-points into your home directory, eg.
-
- ./configure --prefix=$HOME/usr
-
- In this case, you have to insert the contents of
-`buildscripts/out/lilypond-login' or
-`buildscripts/out/lilypond-profile' into your start up scripts by hand.
-
-Configuring for multiple platforms
-----------------------------------
- If you want to build multiple versions of LilyPond with different
-configuration settings, you can use the `--enable-config=CONF' option
-of configure. You should use `make conf=CONF' to generate the output
-in `out-CONF'. Example: suppose I want to build with and without
-profiling. Then I'd use the following for the normal build,
+ This will install a number of files, something close to:
- ./configure --prefix=~ --enable-checking
- make
- make install
-
- and for the profiling version, I specify a different configuration.
-
-
- ./configure --prefix=~ --enable-profiling --enable-config=prof --disable-checking
- make conf=prof
- make conf=prof install
-
-Emacs mode
-==========
+ /usr/local/man/man1/mi2mu.1
+ /usr/local/man/man1/convert-mudela.1
+ /usr/local/man/man1/mudela-book.1
+ /usr/local/man/man1/lilypond.1
+ /usr/local/bin/lilypond
+ /usr/local/bin/mi2mu
+ /usr/local/bin/convert-mudela
+ /usr/local/bin/mudela-book
+ /usr/local/bin/abc2ly
+ /usr/local/share/lilypond/*
+ /usr/local/share/locale/{it,nl}/LC_MESSAGES/lilypond.mo
- An Emacs mode for entering music and running LilyPond is included
-with the source archive as `lilypond-mode.el' and
-`lilypond-font-lock.el'. You should install these files somewhere in
-your LOAD-PATH. If you have installed a precompiled LilyPond package,
-these files can be found in `/usr/share/doc/lilypond-x.y.z/'.
+ The above assumes that you are root and have the GNU development
+tools, and your make is GNU make. If this is not the case, you can
+adjust your environment variables to your taste:
- Add this to your `~/.emacs' or `~/.emacs.el', or install this file
-in Emacs' `site-start.d':
- ;;; lilypond-init.el --- Startup code for LilyPond mode
-
- (load-library "lilypond-mode.el")
- (setq auto-mode-alist
- (cons '("\\.ly$" . LilyPond-mode) auto-mode-alist))
- (add-hook 'LilyPond-mode-hook (lambda () (turn-on-font-lock)))
- If you have the latest LilyPond-1.4.x Debian package, LilyPond-mode
-is automatically loaded, you not even need to modify your `~/.emacs'
-file.
+ export CPPFLAGS="-I /home/me/my_include -DWEIRD_FOOBAR"
+ ./configure
-Compiling for distributions
-===========================
+ `CPPFLAGS' are the preprocessor flags.
-Red Hat Linux
--------------
+ The configure script is Cygnus configure, and it will accept
+`--help'. If you are not root, you will probably have to make it with a
+different `--prefix' option. Our favourite location is
- Red Hat 7.0 i386 RPMS are available from
-`ftp://ftp.cs.uu.nl/pub/GNU/LilyPond/binaries/'.
- You can also compile them yourself. A spec file is in
-`make/out/lilypond.redhat.spec'. This file is distributed along with
-the sources. You can make the rpm by issuing
-
- tar xfz lilypond-x.y.z.tar.gz
- rpm -bb lilypond-x.y.z/make/out/lilypond.redhat.spec
- rpm -i /usr/src/redhat/RPMS/i386/lilypond-x.y.z
-
- For running on a Red Hat system you need these packages: guile,
-tetex, tetex-latex, tetex-dvips, libstdc++, python, ghostscript.
+ ./configure --prefix=$HOME/usr
- For compilation on a Red Hat system you need these packages, in
-addition to the those needed for running: glibc-devel, gcc-c++,
-libstdc++-devel, guile-devel, flex, bison, texinfo, tetex-devel, groff,
-libgr-progs.
+ In this case, you will have to set up MFINPUTS, and TEXINPUTS
+accordingly.
-LinuxPPC
---------
+ Since GNU LilyPond currently is beta, you are advised to also use
- Some LinuxPPC RPMS should available from
-`ftp://ftp.cs.uu.nl/pub/GNU/LilyPond/binaries/'.
- A LinuxPPC RPM can be made using the `lilypond.redhat.spec' file.
+ --enable-debugging
+ --enable-checking
-SuSE
-----
+ Options to configure include:
- Some SUSE RPMS should available from
-`ftp://ftp.lilypond.org/pub/LilyPond/binaries/SuSE'.
+``--enable-printing''
+ Enable debugging print routines (lilypond `-D' option)
- You can also compile a RPM for SUSE yourself. A spec file is in
-`make/out/lilypond.suse.spec', see the instructions for building the
-Red Hat RPM.
+``--enable-optimise''
+ Set maximum optimisation: compile with `-O2'. This can be
+ unreliable on some compiler/platform combinations (eg, DEC Alpha
+ and PPC)
- You must have the following packages: guile tcsh tetex te_latex
-te_kpath te_mpost libpng python gpp libgpp gettext autoconf netpbm
-libnetpb gs_serv gs_lib gs_fonts guile
+``--enable-profiling''
+ Compile with support for profiling.
-Slackware
----------
+``--enable-config''
+ Output to a different configuration file. Needed for
+ multi-platform builds
- No precompiled packages for Slackware are available.
+ All options are documented in the `configure' help The option
+`--enable-optimise' is recommended for Real Life usage.
- Problems have been reported with Slackware 7.0; apparently, it ships
-with a faulty compiler. Do not compile LilyPond with -O2 on this
-platform.
+ If you do
-Mandrake
---------
- Some binaries are available at rpmfind.net. Refer to
-`http://rpmfind.net/linux/mandrake/cooker/contrib/RPMS/'.
+ make all
- You can also compile a RPM for Mandrake yourself. A spec file is in
-`make/out/lilypond.mandrake.spec', see the instructions for building
-the Red Hat RPM.
+ everything will be compiled, but nothing will be installed. The
+resulting binaries can be found in the subdirectories `out/' (which
+contain all files generated during compilation).
-Debian GNU/Linux
-----------------
+Configuring for multiple platforms
+==================================
- A Debian package is also available. You may install it easily by
-running `apt-get' as root:
+ If you want to compile LilyPond with different configuration
+settings, then, you can use the `--enable-config' option. Example:
+suppose I want to build with and without profiling. Then I'd use the
+following for the normal build,
- apt-get install lilypond lilypond-doc
- You can also compile the .deb for Debian yourself, do:
+ ./configure --prefix=~ --disable-optimise --enable-checking
+ make
+ make install
- apt-get -b source lilypond
+ and for the profiling version, I specify a different configuration.
- If you're real impatient, you may even do:
- cd lilypond-x.y.z # a previous version
- uscan # download and build latest directly from upstream
+ ./configure --prefix=~ --enable-profiling --enable-config=optprof --enable-optimise --disable-checking
+ make config=optprof
+ make config=optprof install
- Debian's TeX installation is a bit short on memory, you may want to
-increase it like this:
- --- /etc/texmf/texmf.cnf.dpkg Sun Jan 28 14:12:14 2001
- +++ /etc/texmf/texmf.cnf Fri Apr 27 11:09:35 2001
- @ -384,8 +384,8 @
- main_memory.context = 1500000
- main_memory.mpost = 1000000
- main_memory = 263000 % words of inimemory available; also applies to inimf&mp
- -extra_mem_top = 0 % extra high memory for chars, tokens, etc.
- -extra_mem_bot = 0 % extra low memory for boxes, glue, breakpoints, etc.
- +extra_mem_top = 100000 % extra high memory for chars, tokens, etc.
- +extra_mem_bot = 100000 % extra low memory for boxes, glue, breakpoints, etc.
-
- obj_tab_size.context = 256000
+Installing
+==========
- You could also export `extra_mem_top' and `extra_mem_bot' as
-environment variables if you do not want to or cannot modify
-`/etc/texmf/texmf.cnf'.
+ if you have done a successful `make', then a simple
- Alternatively, visit
- * http://packages.debian.org/lilypond
- (http://packages.debian.org/lilypond)
+ make install
- * http://people.debian.org/~foka/lilypond/
- (http://people.debian.org/~foka/lilypond/) for latest
- semi-unofficial build of LilyPond 1.4.2 for Debian 2.2 (potato)
- users. The official stable Debian 2.2 is stuck with the old
- LilyPond-1.3.24. Since LilyPond-1.4 has been released, the older
- lilypond1.3 Debian package is now obsolete.
+ should do the trick.
- Please contact Anthony Fok <lilypond@packages.debian.org> for more
-information.
+ If you are doing an upgrade, please remember to remove obsolete
+`.pk' and `.tfm' files of the fonts. A script has been provided to do
+the work for you, see `bin/clean-fonts.sh'.
- The build scripts are in the subdirectory `debian/'; you can make
-the .deb by doing, for example:
+Redhat linux
+============
- $ su - root
- # dpkg --purge lilypond lilypond1.3
- # exit
- $ tar xzf lilypond-1.4.3.tar.gz
- $ cd lilypond-1.4.3
- $ dch -p -v 1.4.3-0.local.1 "Local build."
- $ debuild -B
- $ su - root
- # dpkg -i ../lilypond_1.4.3*.deb
- # exit
- $
+ RedHat Linux users can compile an RPM. A spec file is in
+`make/out/lilypond.spec', it is distributed along with the sources.
- Use command `debuild' instead of `debuild -B' if you have a very
-fast machine and want to build the HTML, PS and DVI documentation too.
+ You can make the rpm by issuing
- For compilation on a Debian GNU/Linux system you need these packages,
-in addition to the those needed for running:
+ rpm -tb lilypond-x.y.z.tar.gz
+ rpm -i /usr/src/redhat/RPMS/i386/lilypond-x.y.z
- * g++, cpp, libc6-dev, libstdc++<YOUR-LIBSTDC++-VERSION-HERE>-dev
+ Precompiled i386 RedHat RPMS are available from
+ftp://freshmeat.net/pub/rpms/lilypond/
+(ftp://freshmeat.net/pub/rpms/lilypond/) and
+http://linux.umbc.edu/software/lilypond/rpms/
+(http://linux.umbc.edu/software/lilypond/rpms/).
- * libguile<YOUR-LIBGUILE-VERSION-HERE>-dev
+ For compilation on a RedHat system you need these packages, in
+addition to the those needed for running:
+ * glibc-devel
- * make, m4, flex, bison
+ * libstdc++-devel
- * gettext
+ * guile-devel
- * groff, texinfo
+ * flex
- * bibtex2html (not in Debian 2.2)
+ * bison
- * tetex-base, tetex-bin, tetex-extra, libkpathsea-dev or tetex-dev
+ * texinfo
- * dpkg-dev, debhelper, fakeroot
+Debian GNU/linux
+================
- * gs, netpbm
+ A Debian package is also available; contact Anthony Fok
+<foka@debian.org>. The build scripts are in the subdirectory `debian/'.
- * pnmtopng (only in Debian 2.2; pnmtopng has been merged with netpbm
- in Debian testing/unstable.)
+Windows NT/95
+=============
- Most of these are listed on the `Build-Depends' line in the
-`debian/control' file. To ensure the creation of the lilypond deb is
-trouble-free, we recommend that you first install the following packages
-by running \`apt-get' as root before building the package:
+ Separate instructions on building for W32 are available; See the
+files in `Documentation/ntweb/', included with the sources.
- For Debian 2.2:
+Problems
+========
- apt-get install task-debian-devel task-c++-dev \
- python-base libguile6-dev tetex-bin tetex-dev \
- tetex-extra flex bison texinfo groff gs \
- netpbm pnmtopng m4 gettext
+ For help and questions use <help-gnu-music@gnu.org> and
+<gnu-music-discuss@gnu.org>. Please consult the faq before mailing
+your problems.
- For Debian in development ("unstable", the future 2.3 or 3.0):
+ If you find bugs, please send bug reports to <bug-gnu-music@gnu.org>.
- apt-get install binutils cpp gcc libc6-dev \
- g++ libstdc++2.10-dev \
- python-base libguile-dev tetex-bin libkpathsea-dev \
- tetex-extra flex bison texinfo bibtex2html groff gs \
- netpbm m4 gettext
+ Known bugs that are LilyPond's fault are listed in `TODO', or
+demonstrated in `input/bugs/'.
- And, just so that old fonts from previous versions of LilyPond won't
-interfere with your build, you may want to do this before the build too:
+ Known bugs that are not LilyPond's fault are documented here.
- dpkg --purge lilypond lilypond1.3
+LinuxPPC Bugs:
+**************
-Problems
-========
+ * egcs-1.1.2-12c (stock LinuxPPC R5) has a serious bug, upgrade to
+ fixed in egcs-1.1.2-12f or gcc-2.95-0a,
+ `ftp://dev.linuxppc.org/users/fsirl/R5/RPMS/ppc/'
- For help and questions use <lilypond-user@gnu.org>. Please consult
-the FAQ before mailing your problems. If you find bugs, please send
-bug reports to <bug-lilypond@gnu.org>.
+ * egcs-1.0.2 (LinuxPPC R4): all compiling with `-O2' is suspect, in
+ particular guile-1.3, and Lily herself will break.
- Bugs that are not fault of LilyPond are documented here.
+Linux-i386
+**********
-FLex-2.5.4a and gcc-3.0
------------------------
+ * SuSE6.2 and similar platforms (glibc 2.1, libstdc++ 2.9.0)
- Flex 2.5.4a does not produce g++-3.0 compliant C++ code. To compile
-LilyPond with gcc-3.0 you may do:
+ Lily will crash during parsing (which suggests a C++ library
+ incompatibility). Precise cause, precise platform description or
+ solution are not known.
- CC=gcc-3.0 CXX=g++-3.0 ./configure --enable-config=gcc-3.0
- make conf=gcc-3.0 -C lily out-gcc-3.0/lexer.cc
- patch -p1 < lexer-gcc-3.0.patch
- make conf=gcc-3.0 -C lily
+ Note that this only happens on some computers with the said
+ platform.
- Note that this is fixed in Debian/unstable for flex >= 2.5.4a-13.
+ * libg++ 2.7
-NetBSD
-------
+ LilyPond occasionally crashes while parsing the initialisation
+ files. This is a very obscure bug, and usually entering the
+ commandline differently "fixes" it.
- * The flex precompiled in NetBSD-1.4.2 is broken. Download
- flex-2.5.4a, build, install.
+ lilypond input.ly
- * The configuration of Gcc (egcs-2.91.60 19981201 (egcs-1.1.1
- release)) does not include `/usr/pkg' paths. Configure using:
+ and
+ lilypond -I. ./input.ly
+ makes a difference
- CFLAGS='-I /usr/pkg/include' LDFLAGS='-L/usr/pkg/lib' ./configure
+ Typical stacktrace:
+ SIGSEGV
+ __libc_malloc (bytes=16384)
+ ?? ()
+ yyFlexLexer::yy_create_buffer ()
+ Includable_lexer::new_input (this=0x8209a00, s={strh_ = {
+ This behaviour has been observed with machines that have old libg++
+ versions (LinuxPPC feb '98, RedHat 4.x).
Solaris:
---------
+********
* Sparc64/Solaris 2.6, GNU make-3.77
Not yet resolved.
AIX
----
+***
* AIX 4.3 ld
Some versions of the AIX binder (linker) can fail with a
relocation overflow severe error when the -bbigtoc option
is used to link GCC-produced object files into an
- executable that overflows the TOC. A fix for APAR IX75823
+ executable that overflows the TOC. A fix for APAR IX75823
(OVERFLOW DURING LINK WHEN USING GCC AND -BBIGTOC) is
available from IBM Customer Support and from its
27service.boulder.ibm.com website as PTF U455193.