version that you are working on. See TRANSLATION for details.
@end ignore
-@c \version "2.11.61"
+@c \version "2.12.0"
@node Working on LilyPond projects
@chapter Working on LilyPond projects
@menu
-* Suggestions for writing LilyPond input files::
-* When things don't work::
-* Scores and parts::
+* Suggestions for writing LilyPond input files::
+* When things don't work::
+* Scores and parts::
+* Make and Makefiles::
@end menu
@node Suggestions for writing LilyPond input files
@section Suggestions for writing LilyPond input files
-Now you're ready to begin writing larger LilyPond input files --
+Now you're ready to begin writing larger LilyPond input files --
not just the little examples in the tutorial, but whole pieces.
But how should you go about doing it?
done automatically with @code{convert-ly}, but some changes
might require manual assistance. LilyPond input files can be
structured in order to be easier (or harder) to update.
+
@end itemize
@menu
-* General suggestions::
-* Typesetting existing music::
-* Large projects::
-* Saving typing with variables and functions::
-* Style sheets::
+* General suggestions::
+* Typesetting existing music::
+* Large projects::
+* Saving typing with variables and functions::
+* Style sheets::
@end menu
per line. Saving screen space by cramming eight bars per line just isn't
worth it if you have to @q{debug} your input files.
-@item @strong{Comment your input files}. Use either bar numbers
+@item @strong{Comment your input files}. Use either bar numbers
(every so often) or
references to musical themes (@q{second theme in violins,} @q{fourth
variation,} etc.). You may not need comments when you're writing the piece
@itemize
-@item Enter one manuscript (the physical copy) system at a time (but still
-only one bar per line of text), and
-check each system when you finish it. You may use the
-@code{showLastLength} command to speed up processing -- see
-@ruser{Skipping corrected music}.
+@item Enter the manuscript (the physical copy of the music) into
+LilyPond one system at a time (but still only one bar per line of text),
+and check each system when you finish it. You may use the
+@code{showLastLength} or @code{showFirstLength} properties to speed up
+processing -- see @ruser{Skipping corrected music}.
@item Define @code{mBreak = @{ \break @}} and insert @code{\mBreak}
in the input file whenever the manuscript has a line break. This
will allow LilyPond to place line breaks wherever it feels are
best.
+@item When entering a part for a transposing instrument into a
+variable, it is recommended that the notes are wrapped in
+
+@example
+\transpose c natural-pitch @{...@}
+@end example
+(where @code{natural-pitch} is the open pitch of the instrument) so
+that the music in the variable is effectively in C. You can transpose
+it back again when the variable is used, if required, but you might
+not want to (e.g., when printing a score in concert pitch,
+converting a trombone part from treble to bass clef, etc.)
+Mistakes in transpositions are less likely if all the music in
+variables is at a consistent pitch.
+
+Also, only ever transpose to/from C. That means that the only other
+keys you will use are the natural pitches of the instruments - bes
+for a B-flat trumpet, aes for an A-flat clarinet, etc.
+
@end itemize
@itemize
-@item @strong{Use an variable for each voice}, with a minimum of
+@item @strong{Use a variable for each voice}, with a minimum of
structure inside the definition. The structure of the
@code{\score} section is the most likely thing to change;
the @code{violin} definition is extremely unlikely to change
@end example
@item @strong{Separate tweaks from music definitions}. This
-point was made in previously, but for large
+point was made previously, but for large
projects it is absolutely vital. We might need to change
the definition of @code{fthenp}, but then we only need
to do this once, and we can still avoid touching anything
@ref{Advanced tweaks with Scheme}.
@lilypond[quote,verbatim,ragged-right]
-mpdolce = #(make-dynamic-script (markup #:hspace 1 #:translate (cons 5 0)
+mpdolce = #(make-dynamic-script (markup #:hspace 0 #:translate '(5 . 0)
#:line(#:dynamic "mp" #:text #:italic "dolce" )))
-tempoMark = #(define-music-function (parser location markp) (string?)
-#{
- \once \override Score . RehearsalMark #'self-alignment-X = #left
- \once \override Score . RehearsalMark #'extra-spacing-width = #'(+inf.0 . -inf.0)
- \mark \markup { \bold $markp }
-#})
+
+inst = #(define-music-function (parser location string) (string?)
+ (make-music
+ 'TextScriptEvent
+ 'direction UP
+ 'text (markup #:bold (#:box string))))
\relative c'' {
\tempo 4=50
a4.\mpdolce d8 cis4--\glissando a | b4 bes a2
- \tempoMark "Poco piu mosso"
+ \inst "Clarinet"
cis4.\< d8 e4 fis | g8(\! fis)-. e( d)-. cis2
}
@end lilypond
There are some problems with overlapping output; we'll fix those using
the techniques in @ref{Moving objects}. But let's also
-do something about the @code{mpdolce} and @code{tempoMark}
+do something about the @code{mpdolce} and @code{inst}
definitions. They produce the output we desire, but we might want
to use them in another piece. We could simply copy-and-paste them
at the top of every file, but that's an annoyance. It also leaves
the @code{#()} somewhat ugly. Let's hide them in another file:
@example
-%%% save this to a file called "definitions.ly"
-mpdolce = #(make-dynamic-script (markup #:hspace 1 #:translate (cons 5 0)
+%%% save this to a file called "definitions.ily"
+mpdolce = #(make-dynamic-script (markup #:hspace 0 #:translate '(5 . 0)
#:line(#:dynamic "mp" #:text #:italic "dolce" )))
-tempoMark = #(define-music-function (parser location markp) (string?)
-#@{
- \once \override Score . RehearsalMark #'self-alignment-X = #left
- \once \override Score . RehearsalMark #'extra-spacing-width = #'(+inf.0 . -inf.0)
- \mark \markup @{ \bold $markp @}
-#@})
+
+inst = #(define-music-function (parser location string) (string?)
+ (make-music
+ 'TextScriptEvent
+ 'direction UP
+ 'text (markup #:bold (#:box string))))
@end example
+We will refer to this file using the @code{\include} command near
+the top of the music file. (The extension @code{.ily} is used to
+distinguish this included file, which is not meant to be compiled
+on its own, from the main file.)
Now let's modify our music (let's save this file as @file{"music.ly"}).
@c We have to do this awkward example/lilypond-non-verbatim
@c because we can't do the \include stuff in the manual.
@example
-\include "definitions.ly"
+\include "definitions.ily"
\relative c'' @{
\tempo 4=50
a4.\mpdolce d8 cis4--\glissando a | b4 bes a2
- \once \override Score.RehearsalMark #'padding = #2.0
- \tempoMark "Poco piu mosso"
+ \inst "Clarinet"
cis4.\< d8 e4 fis | g8(\! fis)-. e( d)-. cis2
@}
@end example
@lilypond[quote,ragged-right]
-mpdolce = #(make-dynamic-script (markup #:hspace 1 #:translate (cons 5 0)
+mpdolce = #(make-dynamic-script (markup #:hspace 0 #:translate '(5 . 0)
#:line(#:dynamic "mp" #:text #:italic "dolce" )))
-tempoMark = #(define-music-function (parser location markp) (string?)
-#{
- \once \override Score . RehearsalMark #'self-alignment-X = #left
- \once \override Score . RehearsalMark #'extra-spacing-width = #'(+inf.0 . -inf.0)
- \mark \markup { \bold $markp }
-#})
+
+inst = #(define-music-function (parser location string) (string?)
+ (make-music
+ 'TextScriptEvent
+ 'direction UP
+ 'text (markup #:bold (#:box string))))
\relative c'' {
\tempo 4=50
a4.\mpdolce d8 cis4--\glissando a | b4 bes a2
- \once \override Score.RehearsalMark #'padding = #2.0
- \tempoMark "Poco piu mosso"
+ \inst "Clarinet"
cis4.\< d8 e4 fis | g8(\! fis)-. e( d)-. cis2
}
@end lilypond
note. And finally, my composition professor hates @q{C} time signatures,
so we'd better make that @q{4/4} instead.
-Don't change @file{music.ly}, though. Replace our @file{definitions.ly}
+Don't change @file{music.ly}, though. Replace our @file{definitions.ily}
with this:
@example
-%%% definitions.ly
-mpdolce = #(make-dynamic-script (markup #:hspace 1 #:translate (cons 5 0)
+%%% definitions.ily
+mpdolce = #(make-dynamic-script (markup #:hspace 0 #:translate '(5 . 0)
#:line( #:dynamic "mp" #:text #:italic "dolce" )))
-tempoMark = #(define-music-function (parser location markp) (string?)
-#@{
- \once \override Score . RehearsalMark #'self-alignment-X = #left
- \once \override Score . RehearsalMark #'extra-spacing-width = #'(+inf.0 . -inf.0)
- \mark \markup @{ \bold $markp @}
-#@})
+
+inst = #(define-music-function (parser location string) (string?)
+ (make-music
+ 'TextScriptEvent
+ 'direction UP
+ 'text (markup #:bold (#:box string))))
\layout@{
\context @{ \Score
@end example
@lilypond[quote,ragged-right]
-mpdolce = #(make-dynamic-script (markup #:hspace 1 #:translate (cons 5 0)
+mpdolce = #(make-dynamic-script (markup #:hspace 0 #:translate '(5 . 0)
#:line( #:dynamic "mp" #:text #:italic "dolce" )))
-tempoMark = #(define-music-function (parser location markp) (string?)
-#{
- \once \override Score . RehearsalMark #'self-alignment-X = #left
- \once \override Score . RehearsalMark #'extra-spacing-width = #'(+inf.0 . -inf.0)
- \mark \markup { \bold $markp }
-#})
+
+inst = #(define-music-function (parser location string) (string?)
+ (make-music
+ 'TextScriptEvent
+ 'direction UP
+ 'text (markup #:bold (#:box string))))
\layout{
\context { \Score
\relative c'' {
\tempo 4=50
a4.\mpdolce d8 cis4--\glissando a | b4 bes a2
- \once \override Score.RehearsalMark #'padding = #2.0
- \tempoMark "Poco piu mosso"
+ \inst "Clarinet"
cis4.\< d8 e4 fis | g8(\! fis)-. e( d)-. cis2
}
@end lilypond
That looks nicer! But now suppose that I want to publish this
piece. My composition professor doesn't like @q{C} time
signatures, but I'm somewhat fond of them. Let's copy the
-current @file{definitions.ly} to @file{web-publish.ly} and
+current @file{definitions.ily} to @file{web-publish.ily} and
modify that. Since this music is aimed at producing a pdf which
will be displayed on the screen, we'll also increase the
overall size of the output.
@example
-%%% definitions.ly
-mpdolce = #(make-dynamic-script (markup #:hspace 1 #:translate (cons 5 0)
+%%% definitions.ily
+mpdolce = #(make-dynamic-script (markup #:hspace 0 #:translate '(5 . 0)
#:line( #:dynamic "mp" #:text #:italic "dolce" )))
-tempoMark = #(define-music-function (parser location markp) (string?)
-#@{
- \once \override Score . RehearsalMark #'self-alignment-X = #left
- \once \override Score . RehearsalMark #'extra-spacing-width = #'(+inf.0 . -inf.0)
- \mark \markup @{ \bold $markp @}
-#@})
+
+inst = #(define-music-function (parser location string) (string?)
+ (make-music
+ 'TextScriptEvent
+ 'direction UP
+ 'text (markup #:bold (#:box string))))
#(set-global-staff-size 23)
\layout@{
@end example
@lilypond[quote,ragged-right]
-mpdolce = #(make-dynamic-script (markup #:hspace 1 #:translate (cons 5 0)
+mpdolce = #(make-dynamic-script (markup #:hspace 0 #:translate '(5 . 0)
#:line( #:dynamic "mp" #:text #:italic "dolce" )))
-tempoMark = #(define-music-function (parser location markp) (string?)
-#{
- \once \override Score . RehearsalMark #'self-alignment-X = #left
- \once \override Score . RehearsalMark #'extra-spacing-width = #'(+inf.0 . -inf.0)
- \mark \markup { \bold $markp }
-#})
+
+inst = #(define-music-function (parser location string) (string?)
+ (make-music
+ 'TextScriptEvent
+ 'direction UP
+ 'text (markup #:bold (#:box string))))
#(set-global-staff-size 23)
\layout{
\relative c'' {
\tempo 4=50
a4.\mpdolce d8 cis4--\glissando a | b4 bes a2
- \once \override Score.RehearsalMark #'padding = #2.0
- \tempoMark "Poco piu mosso"
+ \inst "Clarinet"
cis4.\< d8 e4 fis | g8(\! fis)-. e( d)-. cis2
}
@end lilypond
Now in our music, I simply replace
-@code{\include "definitions.ly"} with
-@code{\include "web-publish.ly"}. Of course, we could make this
-even more convenient. We could make a @file{definitions.ly} file which
-contains only the definitions of @code{mpdolce} and @code{tempoMark}, a
-@file{web-publish.ly} file which contains only the @code{\layout}
-section listed above, and a @file{university.ly} file which
+@code{\include "definitions.ily"} with
+@code{\include "web-publish.ily"}. Of course, we could make this
+even more convenient. We could make a @file{definitions.ily} file which
+contains only the definitions of @code{mpdolce} and @code{inst}, a
+@file{web-publish.ily} file which contains only the @code{\layout}
+section listed above, and a @file{university.ily} file which
contains only the tweaks to produce the output that my professor
prefers. The top of @file{music.ly} would then look like this:
@example
-\include "definitions.ly"
+\include "definitions.ily"
%%% Only uncomment one of these two lines!
-\include "web-publish.ly"
-%\include "university.ly"
+\include "web-publish.ily"
+%\include "university.ily"
@end example
This approach can be useful even if you are only producing
one set of parts. I use half a dozen different
@q{style sheet} files for my projects. I begin every music
-file with @code{\include "../global.ly"}, which contains
+file with @code{\include "../global.ily"}, which contains
@example
-%%% global.ly
+%%% global.ily
\version @w{"@version{}"}
#(ly:set-option 'point-and-click #f)
\include "../init/init-defs.ly"
@section When things don't work
@menu
-* Updating old input files::
-* Troubleshooting (taking it all apart)::
-* Minimal examples::
+* Updating old input files::
+* Common errors::
+* Troubleshooting (taking it all apart)::
+* Minimal examples::
@end menu
@node Updating old input files
@subsection Updating old input files
+@cindex convert-ly
+@cindex updating old input files
+
The LilyPond input syntax occasionally changes. As LilyPond itself
improves, the syntax (input language) is modified accordingly. Sometimes
these changes are made to make the input easier to read and write or
special characters into UTF-8 characters; you must manually update
your old LilyPond input files.
+@node Common errors
+@subsection Common errors
+
+The error conditions described below occur often, yet the cause
+is not obvious or easily found. Once seen and understood, they
+are easily handled.
+
+
+@menu
+* Music runs off the page::
+* Apparent error in ../ly/init.ly::
+* Error message Unbound variable %::
+@end menu
+
+@node Music runs off the page
+@unnumberedsubsubsec Music runs off the page
+
+Music running off the page over the right margin or appearing
+unduly compressed is almost always due to entering an incorrect
+duration on a note, causing the final note in a measure to extend
+over the bar line. It is not invalid if the final note in a
+measure does not end on the automatically entered bar line, as the
+note is simply assumed to carry over into the next measure. But
+if a long sequence of such carry-over measures occurs the music
+can appear compressed or may flow off the page because automatic
+line breaks can be inserted only at the end of complete measures,
+i.e., where all notes end before or at the end of the measure.
+
+@warning{An incorrect duration can cause line breaks to be
+inhibited, leading to a line of highly compressed music or
+music which flows off the page.}
+
+The incorrect duration can be found easily if bar checks are used,
+see @ruser{Bar and bar number checks}.
+
+If you actually intend to have a series of such carry-over measures
+you will need to insert an invisible bar line where you want the
+line to break. For details, see @ruser{Bar lines}.
+
+@node Apparent error in ../ly/init.ly
+@unnumberedsubsubsec Apparent error in @code{../ly/init.ly}
+
+Various obscure error messages may appear about syntax errors in
+@code{../ly/init.ly} if the input file is not correctly formed,
+for example, if it does not contain correctly
+matched braces or quote signs.
+
+The most common error is a missing brace, (@code{@}}), at the end of
+a @code{score} block. Here the solution is obvious: check the
+@code{score} block is correctly terminated. The correct structure
+of an input file is described in @ref{How LilyPond input files work}.
+Using an editor which automatically highlights matching brackets and
+braces is helpful to avoid such errors.
+
+This error message can also appear if a terminating quote sign,
+(@code{"}), is omitted. In this case an accompanying error message
+should give a line number close to the line in error. The
+mismatched quote will usually be on the line one or two above.
+
+@node Error message Unbound variable %
+@unnumberedsubsubsec Error message Unbound variable %
+
+This error message will appear at the bottom of the console
+output or log file together with a @qq{GUILE signalled an error ...}
+message every time a Scheme routine is called which (invalidly)
+contains a @emph{LilyPond} rather than a @emph{Scheme} comment.
+
+LilyPond comments begin with a percent sign, (@code{%}), and must
+not be used within Scheme routines. Scheme comments begin with a
+semi-colon, (@code{;}).
@node Troubleshooting (taking it all apart)
@subsection Troubleshooting (taking it all apart)
@end lilypond
+
+@node Make and Makefiles
+@section Make and Makefiles
+
+@cindex makefiles
+@cindex make
+
+Pretty well all the platforms Lilypond can run on support a software
+facility called @code{make}. This software reads a special file called a
+@code{Makefile} that defines what files depend on what others and what
+commands you need to give the operating system to produce one file from
+another. For example the makefile would spell out how to produce
+@code{ballad.pdf} and @code{ballad.midi} from @code{ballad.ly} by
+running Lilypond.
+
+There are times when it is a good idea to create a @code{Makefile}
+for your project, either for your own convenience or
+as a courtesy to others who might have access to your source files.
+This is true for very large projects with many included files and
+different output options (e.g. full score, parts, conductor's
+score, piano reduction, etc.), or for projects that
+require difficult commands to build them (such as
+@code{lilypond-book} projects). Makefiles vary greatly in
+complexity and flexibility, according to the needs and skills of
+the authors. The program GNU Make comes installed on GNU/Linux
+distributions and on MacOS X, and it is also available for Windows.
+
+See the @strong{GNU Make Manual} for full details on using
+@code{make}, as what follows here gives only a glimpse of what it
+can do.
+
+The commands to define rules in a makefile differ
+according to platform; for instance the various forms of Linux and
+MacOS use @code{bash}, while Windows uses @code{cmd}. Note that on
+MacOS X, you need to configure the system to use the command-line
+intepreter. Here are some example makefiles, with versions for both
+Linux/MacOS and Windows.
+
+The first example is for an orchestral work in four
+movements with a directory structure as follows:
+
+@example
+Symphony/
+|-- MIDI/
+|-- Makefile
+|-- Notes/
+| |-- cello.ily
+| |-- figures.ily
+| |-- horn.ily
+| |-- oboe.ily
+| |-- trioString.ily
+| |-- viola.ily
+| |-- violinOne.ily
+| `-- violinTwo.ily
+|-- PDF/
+|-- Parts/
+| |-- symphony-cello.ly
+| |-- symphony-horn.ly
+| |-- symphony-oboes.ly
+| |-- symphony-viola.ly
+| |-- symphony-violinOne.ly
+| `-- symphony-violinTwo.ly
+|-- Scores/
+| |-- symphony.ly
+| |-- symphonyI.ly
+| |-- symphonyII.ly
+| |-- symphonyIII.ly
+| `-- symphonyIV.ly
+`-- symphonyDefs.ily
+@end example
+
+The @code{.ly} files in the @code{Scores} and
+@code{Parts} directories get their notes from @code{.ily}
+files in the @code{Notes} directory:
+
+@example
+%%% top of file "symphony-cello.ly"
+\include ../definitions.ily
+\include ../Notes/cello.ily
+@end example
+
+The makefile will have targets of @code{score} (entire piece in
+full score), @code{movements} (individual movements in full score),
+and @code{parts} (individual parts for performers). There
+is also a target @code{archive} that will create a tarball of
+the source files, suitable for sharing via web or email. Here is
+the makefile for GNU/Linux or MacOS X. It should be saved with the
+name @code{Makefile} in the top directory of the project:
+
+@warning{When a target or pattern rule is defined, the
+subsequent lines must begin with tabs, not spaces.}
+
+@example
+# the name stem of the output files
+piece = symphony
+# determine how many processors are present
+CPU_CORES=`cat /proc/cpuinfo | grep -m1 "cpu cores" | sed s/".*: "//`
+# The command to run lilypond
+LILY_CMD = lilypond -ddelete-intermediate-files \
+ -dno-point-and-click -djob-count=$(CPU_CORES)
+
+# The suffixes used in this Makefile.
+.SUFFIXES: .ly .ily .pdf .midi
+
+# Input and output files are searched in the directories listed in
+# the VPATH variable. All of them are subdirectories of the current
+# directory (given by the GNU make variable `CURDIR').
+VPATH = \
+ $(CURDIR)/Scores \
+ $(CURDIR)/PDF \
+ $(CURDIR)/Parts \
+ $(CURDIR)/Notes
+
+# The pattern rule to create PDF and MIDI files from a LY input file.
+# The .pdf output files are put into the `PDF' subdirectory, and the
+# .midi files go into the `MIDI' subdirectory.
+%.pdf %.midi: %.ly
+ $(LILY_CMD) $<; \ # this line begins with a tab
+ if test -f "$*.pdf"; then \
+ mv "$*.pdf" PDF/; \
+ fi; \
+ if test -f "$*.midi"; then \
+ mv "$*.midi" MIDI/; \
+ fi
+
+notes = \
+ cello.ily \
+ horn.ily \
+ oboe.ily \
+ viola.ily \
+ violinOne.ily \
+ violinTwo.ily
+
+# The dependencies of the movements.
+$(piece)I.pdf: $(piece)I.ly $(notes)
+$(piece)II.pdf: $(piece)II.ly $(notes)
+$(piece)III.pdf: $(piece)III.ly $(notes)
+$(piece)IV.pdf: $(piece)IV.ly $(notes)
+
+# The dependencies of the full score.
+$(piece).pdf: $(piece).ly $(notes)
+
+# The dependencies of the parts.
+$(piece)-cello.pdf: $(piece)-cello.ly cello.ily
+$(piece)-horn.pdf: $(piece)-horn.ly horn.ily
+$(piece)-oboes.pdf: $(piece)-oboes.ly oboe.ily
+$(piece)-viola.pdf: $(piece)-viola.ly viola.ily
+$(piece)-violinOne.pdf: $(piece)-violinOne.ly violinOne.ily
+$(piece)-violinTwo.pdf: $(piece)-violinTwo.ly violinTwo.ily
+
+# Type `make score' to generate the full score of all four
+# movements as one file.
+.PHONY: score
+score: $(piece).pdf
+
+# Type `make parts' to generate all parts.
+# Type `make foo.pdf' to generate the part for instrument `foo'.
+# Example: `make symphony-cello.pdf'.
+.PHONY: parts
+parts: $(piece)-cello.pdf \
+ $(piece)-violinOne.pdf \
+ $(piece)-violinTwo.pdf \
+ $(piece)-viola.pdf \
+ $(piece)-oboes.pdf \
+ $(piece)-horn.pdf
+
+# Type `make movements' to generate files for the
+# four movements separately.
+.PHONY: movements
+movements: $(piece)I.pdf \
+ $(piece)II.pdf \
+ $(piece)III.pdf \
+ $(piece)IV.pdf
+
+all: score parts movements
+
+archive:
+ tar -cvvf stamitz.tar \ # this line begins with a tab
+ --exclude=*pdf --exclude=*~ \
+ --exclude=*midi --exclude=*.tar \
+ ../Stamitz/*
+@end example
+
+
+There are special complications on the Windows platform. After
+downloading and installing GNU Make for Windows, you must set the
+correct path in the system's environment variables so that the
+DOS shell can find the Make program. To do this, right-click on
+"My Computer," then choose @code{Properties} and
+@code{Advanced}. Click @code{Environment Variables}, and then
+in the @code{System Variables} pane, highlight @code{Path}, click
+@code{edit}, and add the path to the GNU Make executable file, which
+ will look something like this:
+
+@example
+C:\Program Files\GnuWin32\bin
+@end example
+
+The makefile itself has to be altered to handle different shell
+commands and to deal with spaces that are present
+in some default system directories. The @code{archive} target
+is eliminated since Windows does not have the @code{tar} command,
+and Windows also has a different default extension for midi files.
+
+
+@example
+## WINDOWS VERSION
+##
+piece = symphony
+LILY_CMD = lilypond -ddelete-intermediate-files \
+ -dno-point-and-click \
+ -djob-count=$(NUMBER_OF_PROCESSORS)
+
+#get the 8.3 name of CURDIR (workaround for spaces in PATH)
+workdir = $(shell for /f "tokens=*" %%b in ("$(CURDIR)") \
+ do @@echo %%~sb)
+
+.SUFFIXES: .ly .ily .pdf .mid
+
+VPATH = \
+ $(workdir)/Scores \
+ $(workdir)/PDF \
+ $(workdir)/Parts \
+ $(workdir)/Notes
+
+%.pdf %.mid: %.ly
+ $(LILY_CMD) $< # this line begins with a tab
+ if exist "$*.pdf" move /Y "$*.pdf" PDF/ # begin with tab
+ if exist "$*.mid" move /Y "$*.mid" MIDI/ # begin with tab
+
+notes = \
+ cello.ily \
+ figures.ily \
+ horn.ily \
+ oboe.ily \
+ trioString.ily \
+ viola.ily \
+ violinOne.ily \
+ violinTwo.ily
+
+$(piece)I.pdf: $(piece)I.ly $(notes)
+$(piece)II.pdf: $(piece)II.ly $(notes)
+$(piece)III.pdf: $(piece)III.ly $(notes)
+$(piece)IV.pdf: $(piece)IV.ly $(notes)
+
+$(piece).pdf: $(piece).ly $(notes)
+
+$(piece)-cello.pdf: $(piece)-cello.ly cello.ily
+$(piece)-horn.pdf: $(piece)-horn.ly horn.ily
+$(piece)-oboes.pdf: $(piece)-oboes.ly oboe.ily
+$(piece)-viola.pdf: $(piece)-viola.ly viola.ily
+$(piece)-violinOne.pdf: $(piece)-violinOne.ly violinOne.ily
+$(piece)-violinTwo.pdf: $(piece)-violinTwo.ly violinTwo.ily
+
+.PHONY: score
+score: $(piece).pdf
+
+.PHONY: parts
+parts: $(piece)-cello.pdf \
+ $(piece)-violinOne.pdf \
+ $(piece)-violinTwo.pdf \
+ $(piece)-viola.pdf \
+ $(piece)-oboes.pdf \
+ $(piece)-horn.pdf
+
+.PHONY: movements
+movements: $(piece)I.pdf \
+ $(piece)II.pdf \
+ $(piece)III.pdf \
+ $(piece)IV.pdf
+
+all: score parts movements
+@end example
+
+
+The next Makefile is for a @command{lilypond-book} document done in
+LaTeX. This project has an index, which requires that the
+@command{latex} command be run twice to update links. Output files are
+all stored in the @code{out} directory for .pdf output and in the
+@code{htmlout} directory for the html output.
+
+@example
+SHELL=/bin/sh
+FILE=myproject
+OUTDIR=out
+WEBDIR=htmlout
+VIEWER=acroread
+BROWSER=firefox
+LILYBOOK_PDF=lilypond-book --output=$(OUTDIR) --pdf $(FILE).lytex
+LILYBOOK_HTML=lilypond-book --output=$(WEBDIR) $(FILE).lytex
+PDF=cd $(OUTDIR) && pdflatex $(FILE)
+HTML=cd $(WEBDIR) && latex2html $(FILE)
+INDEX=cd $(OUTDIR) && makeindex $(FILE)
+PREVIEW=$(VIEWER) $(OUTDIR)/$(FILE).pdf &
+
+all: pdf web keep
+
+pdf:
+ $(LILYBOOK_PDF) # begin with tab
+ $(PDF) # begin with tab
+ $(INDEX) # begin with tab
+ $(PDF) # begin with tab
+ $(PREVIEW) # begin with tab
+
+web:
+ $(LILYBOOK_HTML) # begin with tab
+ $(HTML) # begin with tab
+ cp -R $(WEBDIR)/$(FILE)/ ./ # begin with tab
+ $(BROWSER) $(FILE)/$(FILE).html & # begin with tab
+
+keep: pdf
+ cp $(OUTDIR)/$(FILE).pdf $(FILE).pdf # begin with tab
+
+clean:
+ rm -rf $(OUTDIR) # begin with tab
+
+web-clean:
+ rm -rf $(WEBDIR) # begin with tab
+
+archive:
+ tar -cvvf myproject.tar \ # begin this line with tab
+ --exclude=out/* \
+ --exclude=htmlout/* \
+ --exclude=myproject/* \
+ --exclude=*midi \
+ --exclude=*pdf \
+ --exclude=*~ \
+ ../MyProject/*
+@end example
+
+TODO: make this thing work on Windows
+
+The previous makefile does not work on Windows. An alternative
+for Windows users would be to create a simple batch file
+containing the build commands. This will not
+keep track of dependencies the way a makefile does, but it at
+least reduces the build process to a single command. Save the
+following code as @command{build.bat} or @command{build.cmd}.
+The batch file can be run at the DOS prompt or by simply
+double-clicking its icon.
+
+@example
+lilypond-book --output=out --pdf myproject.lytex
+cd out
+pdflatex myproject
+makeindex myproject
+pdflatex myproject
+cd ..
+copy out\myproject.pdf MyProject.pdf
+@end example
+
+
+@seealso
+Application Usage:
+@rprogram{Setup for MacOS X},
+@rprogram{Command-line usage},
+@rprogram{LilyPond-book}
projects / lilypond.git / blobdiff