* Appearance of objects::
* Placement of objects::
* Collisions of objects::
-* Page layout::
* Further tweaking::
@end menu
in a piece of music. But the bar lines are normally inserted
automatically. How do we prevent them printing?
-As before, we go to the IR to find the layout object which prints
+Before we tackle this, let us remember that object properties
+are grouped in what are called @emph{interfaces} -- see
+@ref{Properties found in interfaces}. This is simply to
+group together those properties that are commonly required
+together -- if one of them is required for an object, so are
+the others. Some objects then need the properties in some
+interfaces, others need them from other interfaces. The
+interfaces which contain the properties required by a
+particular grob are listed in the IR at the bottom of the
+page describing that grob, and those properties may be
+viewed by looking at those interfaces.
+
+We explained how to find information about grobs in
+@ref{Properties of layout objects}. Using the same approach,
+we go to the IR to find the layout object which prints
bar lines. Going via @emph{Backend} and @emph{All layout objects}
we find there
is a layout object called @code{BarLine}. Its properties include
by extension, many other layout objects too.) Let's consider
each of these in turn.
+@c FIXME: is this what you meant?
+@c TODO Change all other headings like this
@subheading stencil
@cindex stencil property
outside-staff objects which are, by default, placed in the
@code{Staff} Context.
-@multitable @columnfractions .3 .3
-@headitem Layout Object @tab Priority
-@item @code{DynamicLineSpanner} @tab @code{ 250}
-@item @code{DynamicText} @tab @code{ 250}
-@item @code{OttavaBracket} @tab @code{ 400}
-@item @code{TextScript} @tab @code{ 450}
-@item @code{TextSpanner} @tab @code{ 350}
+@multitable @columnfractions .3 .3 .3
+@headitem Layout Object
+ @tab Priority
+ @tab Controls position of:
+@item @code{DynamicLineSpanner}
+ @tab @code{ 250}
+ @tab All dynamic markings
+@item @code{OttavaBracket}
+ @tab @code{ 400}
+ @tab Ottava brackets
+@item @code{TextScript}
+ @tab @code{ 450}
+ @tab Markup text
+@item @code{TextSpanner}
+ @tab @code{ 350}
+ @tab Text spanners
@end multitable
Here is an example showing the default placement of these.
is to position all the annotation at the same distance above
the staff? To do this, we clearly
will need to space the notes out horizontally to make more
-room for the text. This is done using the @code{fatText}
+room for the text. This is done using the @code{textLengthOn}
command.
-@subheading \fatText
+@subheading \textLengthOn
-@funindex \fatText
+@funindex \textLengthOn
@cindex notes, spreading out with text
By default, text produced by markup takes up no horizontal space
-as far as laying out the music is concerned. The @code{\fatText}
+as far as laying out the music is concerned. The @code{\textLengthOn}
command reverses this behaviour, causing the notes to be spaced
out as far as is necessary to accommodate the text:
@lilypond[quote,fragment,ragged-right,verbatim,relative=2]
-\fatText % Cause notes to space out to accommodate text
+\textLengthOn % Cause notes to space out to accommodate text
c2^"Text1"
c^"Text2"
c^"Text3"
@end lilypond
The command to revert to the default behaviour is
-@code{\emptyText}. Remember @code{\once} only works with
+@code{\textLengthOff}. Remember @code{\once} only works with
@code{\override}, @code{\set}, @code{\revert} or @code{unset},
-so cannot be used with @code{\fatText}.
+so cannot be used with @code{\textLengthOn}.
Markup text will also avoid notes which project above the staff.
If this is not desired, the automatic displacement upwards may
R1
% Turn off collision avoidance
\once \override TextScript #'outside-staff-priority = ##f
-\fatText % and turn on fatText
+\textLengthOn % and turn on textLengthOn
c,,2^"Long Text " % Spaces at end are honoured
c''2
@end lilypond
be preferable to space out the notes
a little further, so the dynamic markings can all fit at the
same vertical distance from the staff. We were able to do this
-for markup text by using the @code{\fatText} command, but there
+for markup text by using the @code{\textLengthOn} command, but there
is no equivalent command for dynamic marks. So we shall have to
work out how to do this using @code{\override} commands.
By default, outside-staff objects are given a width of zero so
that they may overlap in the horizontal direction. This is done
-by by the trick of adding infinity to the leftmost extent and
+by the trick of adding infinity to the leftmost extent and
minus infinity to the rightmost extent by setting the
@code{extra-spacing-width} to @code{'(+inf.0 . -inf.0)}. So
to ensure they do not overlap in the horizontal direction we
@end lilypond
-@node Page layout
-@section Page layout
-
-@menu
-* Introduction to layout::
-* Global sizes::
-* Line breaks::
-* Page breaks::
-* Fitting music onto fewer pages::
-@end menu
-
-@node Introduction to layout
-@subsection Introduction to layout
-
-The global paper layout is determined by three factors:
-the page layout, the line breaks, and the spacing. These all
-influence each other. The choice of spacing determines how
-densely each system of music is set. This influences where line
-breaks are chosen, and thus ultimately, how many pages a piece
-of music takes.
-
-Settings which influence layout may be placed in two blocks.
-The @code{\paper @{...@}} block is placed outside any
-@code{\score @{...@}} blocks and contains settings that
-relate to the entire document. The @code{\layout @{...@}}
-block is placed within a @code{\score @{...@}} block and
-contains settings for that particular score. If you have
-only one @code{\score @{...@}} block the two have the same
-effect. In general the commands shown in this section can
-be placed in either.
-
-Much more detail on the options for tweaking the laying out
-of music are contained in @ruser{Spacing issues}.
-
-@node Global sizes
-@subsection Global sizes
-
-TODO Check all these examples
-
-The default @strong{paper size} which LilyPond assumes in laying
-out the music is A4. This may be changed in two ways:
-
-@example
-#(set-default-paper-size "a6")
-
-\paper @{
-#(set-paper-size "letter")
-@}
-@end example
-
-@noindent
-The first command sets the size of all pages. The second command
-sets the size of the pages to which the \paper block applies -- if
-the \paper block is at the top of the file, then it will apply
-to all pages. Support for the following paper sizes is available:
-a6, a5, a4, a3, legal, letter, 11x17 (also known as tabloid).
-Setting the paper size automatically sets suitable margins and
-line length.
-
-If the symbol @code{landscape} is supplied as an argument to
-@code{set-default-paper-size}, the pages will be rotated by 90
-degrees, and wider line widths will be set correspondingly, e.g.
-
-@example
-#(set-default-paper-size "a6" 'landscape)
-@end example
-
-The default @strong{staff size} is set to 20 points.
-This may be changed in two ways:
-
-@example
-#(set-global-staff-size 14)
-
-\paper @{
-#(set-global-staff-size 16)
-@}
-@end example
-
-@noindent
-The first command sets the size in all pages. The second command
-sets the size in the pages to which the \paper block applies -\96 if
-the \paper block is at the top of the file, then it will apply
-to all pages. All the fonts are automatically scaled to suit
-the new value of the staff size.
-
-@node Line breaks
-@subsection Line breaks
-
-Line breaks are normally determined automatically. They are chosen
-so that lines look neither cramped nor loose, and consecutive
-lines have similar density. Occasionally you might want to
-override the automatic breaks; you can do this by specifying
-@code{\break}. This will force a line break at this point. However,
-line breaks can only occur at the end of @q{complete} bars, i.e.,
-where there are no notes or tuplets left @q{hanging} over the bar
-line. If you want to have a line break where there is no bar line,
-you can force an invisible bar line by entering @code{\bar ""},
-although again there must be no notes left hanging over in any of
-the staves at this point, or it will be ignored.
-
-The opposite command, @code{\noBreak}, forbids a line break at the
-bar line where it is inserted.
-
-The most basic settings influencing line spacing are @code{indent}
-and @code{line-width}. They are set in the @code{\layout} block.
-They control the indentation of the first line of music, and the
-lengths of the lines.
-
-If @code{ragged-right} is set to true in the @code{\layout} block,
-then systems end at their natural horizontal length, instead of
-being spread horizontally to fill the whole line. This is useful
-for short fragments, and for checking how tight the natural
-spacing is.
-
-The option @code{ragged-last} is similar to @code{ragged-right},
-but affects only the last line of the piece.
-
-@example
-\layout @{
-indent = #0
-line-width = #150
-ragged-last = ##t
-@}
-@end example
-
-@node Page breaks
-@subsection Page breaks
-
-The default page breaking may be overriden by inserting
-@code{\pageBreak} or @code{\noPageBreak} commands.
-These commands are analogous to the @code{\break} and
-@code{\noBreak} commands discused above and force or forbid
-a page-break at the point where they are inserted.
-Of course, the @code{\pageBreak} command also forces a line break.
-Like @code{\break}, the @code{\pageBreak} command is effective only
-at the end of a @q{complete} bar as defined above. For more
-details see @ruser{Page breaking} and following sections.
-
-There are also analogous settings to @code{ragged-right} and
-@code{ragged-last} which have the same effect on vertical spacing:
-@code{ragged-bottom} and @code{ragged-last-bottom}. If set to
-@code{##t} the systems on all pages or just the last page
-respectively will not be justified vertically.
-
-For more details see @ruser{Vertical spacing}.
-
-@node Fitting music onto fewer pages
-@subsection Fitting music onto fewer pages
-
-Sometimes you can end up with one or two staves on a second
-(or third, or fourth...) page. This is annoying, especially
-if you look at previous pages and it looks like there is plenty
-of room left on those.
-
-When investigating layout issues, @code{annotate-spacing} is
-an invaluable tool. This command prints the values of various
-layout spacing commands; see @ruser{Displaying spacing}, for more
-details. From the output of @code{annotate-spacing}, we can
-see which margins we may wish to alter.
-
-Other than margins, there are a few other options to save space:
-
-@itemize
-@item
-You may tell LilyPond to place systems as close together as
-possible (to fit as many systems as possible onto a page), but
-then to space those systems out so that there is no blank
-space at the bottom of the page.
-
-@example
-\paper @{
- between-system-padding = #0.1
- between-system-space = #0.1
- ragged-last-bottom = ##f
- ragged-bottom = ##f
-@}
-@end example
-
-@item
-You may force the number of systems (i.e., if LilyPond wants
-to typeset some music with 11 systems, you could force it to
-use 10).
-
-@example
-\paper @{
- system-count = #10
-@}
-@end example
-
-@item
-Avoid (or reduce) objects which increase the vertical size of
-a system. For example, volta repeats (or alternate repeats)
-require extra space. If these repeats are spread over two
-systems, they will take up more space than one system with
-the volta repeats and another system without.
-
-Another example is moving dynamics which @q{stick out} of
-a system, as in the second bar here:
-
-@lilypond[verbatim,quote,fragment,ragged-right,relative=1]
-e4 c g\f c
-\override DynamicText #'extra-offset = #'( -2.2 . 2.0)
-e4 c g\f c
-@end lilypond
-
-@item
-Alter the horizontal spacing via @code{SpacingSpanner}. See
-@ruser{Changing horizontal spacing}, for more details. Here's
-an example first showing the default behaviour:
-
-@lilypond[verbatim,quote,ragged-right]
-\score {
- \relative c'' {
- g4 e e2 |
- f4 d d2 |
- c4 d e f |
- g4 g g2 |
- g4 e e2 |
- }
-}
-@end lilypond
-
-@noindent
-and now with @code{common-shortest-duration} increased from the
-value of @code{1/4} (a quarter note is the most common in this
-example) to @code{1/2}:
-
-@lilypond[verbatim,quote,ragged-right]
-\score {
- \relative c'' {
- g4 e e2 |
- f4 d d2 |
- c4 d e f |
- g4 g g2 |
- g4 e e2 |
- }
- \layout {
- \context {
- \Score
- \override SpacingSpanner
- #'common-shortest-duration = #(ly:make-moment 1 2)
- }
- }
-}
-@end lilypond
-
-@noindent
-Note that this override cannot be modified dynamically, so it must
-always be placed in a @code{\context@{..@}} block so that it applies
-to the whole score.
-
-TODO Add description of using \context in this way earlier if it is
-not already anywhere -td
-
-@end itemize
-
-
@node Further tweaking
@section Further tweaking
@menu
* Other uses for tweaks::
+* Using variables for tweaks::
* Other sources of information::
* Advanced tweaks with Scheme::
* Avoiding tweaks with slower processing::
@end itemize
+@node Using variables for tweaks
+@subsection Using variables for tweaks
+
+TODO Add section
@node Other sources of information
@subsection Other sources of information
+
+
projects / lilypond.git / blobdiff