version that you are working on. See TRANSLATION for details.
@end ignore
+@c \version "2.11.38"
+
@node Text
@section Text
-@lilypondfile[quote,ragged-right,line-width=16\cm,staffsize=16]
-{text-headword.ly}
+@lilypondfile[quote]{text-headword.ly}
This section explains how to include text (with various
-formatting) in your scores.
+formatting) in music scores.
+
+@noindent
+Some text elements that are not dealt with here are discussed in other
+specific sections: @ref{Vocal music}, @ref{Titles and headers}.
+
@cindex Text, other languages
-To write accented and special text (such as characters from other
-languages), simply insert the characters directly into the
-lilypond file. The file must be saved as UTF-8. For more
-information, see @ref{Text encoding}.
+@warning{To write accented and special text (such as characters
+from other languages), simply insert the characters directly into
+the LilyPond file. The file must be saved as UTF-8. For more
+information, see @ref{Text encoding}.}
@menu
* Writing text::
-* Text markup::
-* Special text concerns::
+* Formatting text::
+* Fonts::
@end menu
@node Writing text
@subsection Writing text
+This section introduces different ways of adding text to a score.
+
@menu
-* Overview of text entry::
* Text scripts::
* Text spanners::
* Text marks::
+* Separate text::
@end menu
-@node Overview of text entry
-@subsubsection Overview of text entry
-
-There are four ways to add text to scores:
-
-@itemize
-@item
-@ref{Text scripts}: blah blah
-
-@lilypond[verbatim,quote,ragged-right,fragment,relative=2]
-c4^"text" c c c
-@end lilypond
-
-@item
-@ref{Text spanners}: blah blah
-
-@lilypond[verbatim,quote,ragged-right,fragment,relative=2]
-c1
-\override TextSpanner #'bound-details #'left #'text =
- \markup { \upright "rall" }
-c2\startTextSpan b c\stopTextSpan a
-@end lilypond
-
-@item
-@ref{Text marks}: blah blah
-
-@lilypond[verbatim,quote,ragged-right,fragment,relative=2]
-c4\mark "foo" c c c
-@end lilypond
-
-@item
-@ref{Vocal music}: blah blah, not in this section.
-
-@lilypond[verbatim,quote,ragged-right]
-<<
- \relative c'' { c4 c c c }
- \addlyrics { one two three four }
->>
-@end lilypond
-
-@end itemize
-
-@seealso
-
-Snippets: @lsrdir{Text,Text}
-
-
@node Text scripts
@subsubsection Text scripts
@cindex text items, non-empty
@cindex non-empty texts
-It is possible to place arbitrary strings of text or @ref{Text
-markup}, above or below notes by using a string @code{c^"text"}.
-By default, these indications do not influence the note spacing,
-but by using the command @code{\textLengthOn}, the widths will be taken
-into account
+It is possible to add arbitrary text indications
+to a score, as demonstrated in the following example.
+Such indications can also be manually placed
+above or below the staff, using the
+simple syntax described in @ref{Controlling direction and
+placement}.
@lilypond[quote,fragment,ragged-right,verbatim,relative=1]
-c4^"longtext" \textLengthOn c4_"longlongtext" c4
+d8^"pizz." e f g a4-"scherz." f
@end lilypond
-@noindent
-To prevent text from influencing spacing, use @code{\textLengthOff}.
-
-More complex formatting may also be added to a note by using the
-markup command,
+In LilyPond, such text strings are called @command{markup}
+objects. This syntax is actually a shorthand; more complex text
+formatting may be added to a note by explicitly using a
+@code{\markup} block, as described in @ref{Formatting text}.
-@lilypond[fragment,ragged-right,verbatim,quote]
-c'4^\markup { bla \bold bla }
+@lilypond[quote,fragment,ragged-right,verbatim,relative=1]
+d8^\markup { \italic pizz. } e f g
+a4_\markup { \tiny scherz. \bold molto } f
@end lilypond
-The @code{\markup} is described in more detail in @ref{Text
-markup}.
+By default, text indications do not influence the note spacing.
+However, their widths can be taken into account:
+in the following example, the first text string does not affect
+spacing, whereas the second one does.
+@lilypond[quote,fragment,ragged-right,verbatim,relative=1]
+d8^"pizz." e f g \textLengthOn a4_"scherzando" f
+@end lilypond
-@refcommands
+@predefined
@funindex \textLengthOn
@code{\textLengthOn},
@funindex \textLengthOff
-@code{\textLengthOff}.
+@code{\textLengthOff}
+
+
+@seealso
+
+Notation Reference: @ref{Formatting text},
+@ref{Controlling direction and placement}.
+Snippets:
+@rlsr{Text}.
-@commonprop
+Internals Reference: @rinternals{TextScript}.
+
+@knownissues
Checking to make sure that text scripts and lyrics are within the
margins is a relatively large computational task. To speed up
-processing, lilypond does not perform such calculations by
+processing, LilyPond does not perform such calculations by
default; to enable it, use
@example
@end example
-@seealso
-
-Notation Reference: @ref{Text markup}.
-
-Snippets: @lsrdir{Text,Text}
-
-Internals Reference: @internalsref{TextScript}.
-
-
@node Text spanners
@subsubsection Text spanners
Some performance indications, e.g., @i{rallentando} or
@i{accelerando}, are written as text and are extended over many
-measures with dotted lines. Such texts are created using text
-spanners; attach @code{\startTextSpan} and @code{\stopTextSpan} to
-the first and last notes of the spanner.
+measures with dotted lines.
+Such objects, called @q{spanners}, may be created
+from one note to another using the following syntax:
-The string to be printed, as well as the style, is set through
-object properties
+@lilypond[verbatim,quote,ragged-right,fragment,relative=2]
+\override TextSpanner #'bound-details #'left #'text = "rit."
+b1\startTextSpan
+e,\stopTextSpan
+@end lilypond
-@lilypond[quote,ragged-right,fragment,relative=1,verbatim]
-c1
-\textSpannerDown
-\override TextSpanner #'bound-details #'left #'text =
- \markup { \upright "rall" }
-c2\startTextSpan b c\stopTextSpan a
-\break
-\textSpannerUp
+@noindent
+The string to be printed is set through
+object properties. By default it is printed in italic characters,
+but different formatting can be obtained using
+@code{\markup} blocks, as described in @ref{Formatting text}.
+
+@lilypond[quote,ragged-right,fragment,relative=2,verbatim]
\override TextSpanner #'bound-details #'left #'text =
- \markup { \italic "rit" }
-c2\startTextSpan b c\stopTextSpan a
+ \markup { \upright "rit." }
+b1\startTextSpan c
+e,\stopTextSpan
@end lilypond
-@refcommands
+The line style, as well as the text string, can be defined as an
+object property. This syntax is described in @ref{Line styles}.
+
+@predefined
@funindex textSpannerUp
@code{\textSpannerUp},
@funindex textSpannerDown
@code{\textSpannerDown},
@funindex textSpannerNeutral
-@code{\textSpannerNeutral}.
-
-
-@commonprop
-
-To print a solid line, use
-
-@example
-\override TextSpanner #'style = #'line
-@end example
-
+@code{\textSpannerNeutral}
@seealso
-Snippets: @lsrdir{Text,Text}
+Notation Reference: @ref{Line styles}.
+
+Snippets:
+@rlsr{Text}.
-Internals Reference: @internalsref{TextSpanner}.
+Internals Reference: @rinternals{TextSpanner}.
@node Text marks
@cindex bar lines, symbols on
@funindex \mark
-The @code{\mark} command is primarily used for @ref{Rehearsal
-marks}, but it can also be used to put signs like coda, segno, and
-fermata on a bar line. Use @code{\markup} to access the
-appropriate symbol (symbols are listed in @ref{The Feta font}).
+Various text elements can be added to a score using
+the syntax described in @ref{Rehearsal marks}:
+
+@lilypond[verbatim,quote,ragged-right,fragment,relative=2]
+c4\mark "Allegro" c c c
+@end lilypond
+
+This syntax makes possible to put any text on a bar line;
+more complex text formatting may be added using a @code{\markup}
+block, as described in @ref{Formatting text}. This can be used to print
+signs like coda, segno or fermata, by specifying the appropriate
+symbol name:
@lilypond[fragment,quote,ragged-right,verbatim,relative=2]
c1 \mark \markup { \musicglyph #"scripts.ufermata" }
@end lilypond
@noindent
-@code{\mark} is only typeset above the top stave of the score. If
-you specify the @code{\mark} command at a bar line, the resulting
-mark is placed above the bar line. If you specify it in the
-middle of a bar, the resulting mark is positioned between notes.
-If it is specified before the beginning of a score line, it is
-placed before the first note of the line. Finally, if the mark
-occurs at a line break, the mark will be printed at the beginning
-of the next line.
+Such objects are only typeset above the top staff of the score; depending on
+whether they are specified at the end or the middle of a bar, they
+can be placed above the bar line or between notes. When specified at the
+beginning of a score or at a line break, marks will be printed at
+the beginning of the line (the next line, in case of a line break).
-@c IMO this is a bug; hopefully it'll be fixed soon, so I can
-@c delete this sentence. -gp
-If there is no next line, then the mark will not be printed at
-all.
+@lilypond[fragment,quote,ragged-right,verbatim,relative=2]
+\mark "Allegro" c1
+c\mark "assai" \break
+c c
+@end lilypond
-@commonprop
+@snippets
-To print the mark at the end of the current line, use
+@lilypondfile[verbatim,lilyquote,ragged-right,texidoc]
+{printing-marks-at-the-end-of-a-line-or-a-score.ly}
-@example
-\override Score.RehearsalMark
- #'break-visibility = #begin-of-line-invisible
-@end example
+@lilypondfile[verbatim,lilyquote,ragged-right,texidoc]
+{aligning-marks-with-various-notation-objects.ly}
-@code{\mark} is often useful for adding text to the end of bar.
-In such cases, changing the @code{#'self-alignment} is very useful
+@lilypondfile[verbatim,lilyquote,ragged-right,texidoc]
+{printing-marks-on-every-staff.ly}
-@lilypond[fragment,quote,ragged-right,verbatim,relative=2]
-\override Score.RehearsalMark
- #'break-visibility = #begin-of-line-invisible
-c1 c c c4 c c c
-\once \override Score.RehearsalMark #'self-alignment-X = #right
-\mark "D.S. al Fine "
-@end lilypond
+@seealso
-Text marks may be aligned with notation objects other than bar
-lines,
+Notation Reference: @ref{Rehearsal marks},
+@ref{Formatting text}, @ref{The Feta font}.
-@lilypond[fragment,quote,ragged-right,verbatim,relative=2]
-\relative {
- c1
- \key cis \major
- \clef alto
- \override Score.RehearsalMark #'break-align-symbols = #'(key-signature)
- \mark "on key"
- cis
- \key ces \major
- \override Score.RehearsalMark #'break-align-symbols = #'(clef)
- \clef treble
- \mark "on clef"
- ces
- \override Score.RehearsalMark #'break-align-symbols = #'(time-signature)
- \key d \minor
- \clef tenor
- \time 3/4
- \mark "on time"
- c
-}
-@end lilypond
+Snippets:
+@rlsr{Text}.
+
+Internals Reference: @rinternals{RehearsalMark}.
+
+@knownissues
+@c IMO this is a bug; hopefully it'll be fixed soon, so I can
+@c delete this sentence. -gp
+@c A workaround is suggested in the first @snippets item -vv
-Possible symbols for the @code{break-align-symbols} list are
-@code{ambitus}, @code{breathing-sign}, @code{clef}, @code{custos},
-@code{staff-bar}, @code{left-edge}, @code{key-cancellation},
-@code{key-signature}, and @code{time-signature}.
+If a mark is entered at the end of the last bar of the score (where
+there is no next line), then the mark will not be printed at
+all.
-The text marks will, by default, be aligned with the middle of the
-notation object, but this can be changed by overriding the
-@code{break-align-anchor-alignment} and @code{break-align-anchor}
-properties for the appropriate grob.
+@node Separate text
+@subsubsection Separate text
-@lilypond[fragment,quote,ragged-right,verbatim]
-{
- \override Score.RehearsalMark #'break-align-symbols = #'(key-signature)
- c1
- \key cis \major
-
- % the RehearsalMark will be aligned with the left edge of the KeySignature
- \once \override Staff.KeySignature #'break-align-anchor-alignment = #LEFT
- \mark \default
- cis1
- \key ces \major
-
- % the RehearsalMark will be aligned with the right edge of the KeySignature
- \once \override Staff.KeySignature #'break-align-anchor-alignment = #RIGHT
- \mark \default
- ces1
- \key cis \major
-
- % the RehearsalMark will be aligned with the left edge of the KeySignature
- % and then shifted right by 2 units.
- \once \override Staff.KeySignature #'break-align-anchor = #2
- \mark \default
- ces1
+@cindex separate text
+@cindex standalone text
+@cindex top-level text
+@cindex text, standalone
+@funindex \markup
+
+A @code{\markup} block can exist by itself, outside of any
+any @code{\score} block, as a @qq{top-level
+expression}. This syntax is described in @ref{File structure}.
+
+@lilypond[quote,ragged-right,verbatim]
+\markup {
+ Tomorrow, and tomorrow, and tomorrow...
}
@end lilypond
-Although text marks are normally only printed above the topmost
-staff, you may alter this to print them on every staff,
+@noindent
+This allows to print text separately
+from the music, which is particularly
+useful when the input file contains
+several music pieces, as described in
+@ref{Multiple scores in a book}.
-@lilypond[quote,ragged-right,verbatim,relative=2]
-{
- \new Score \with {
- \remove "Mark_engraver"
- }
- <<
- \new Staff \with {
- \consists "Mark_engraver"
- }
- { c''1 \mark "foo" c'' }
- \new Staff \with {
- \consists "Mark_engraver"
- }
- { c'1 \mark "foo" c' }
- >>
+@lilypond[quote,ragged-right,verbatim]
+\score {
+ c'1
+}
+\markup {
+ Tomorrow, and tomorrow, and tomorrow...
+}
+\score {
+ c'1
}
@end lilypond
+Using a specific syntax, text blocks can be spread
+over multiple pages, making possible to print
+text documents or books -- and therefore to
+use LilyPond as a word processor. This syntax is described in
+@ref{Multi-page markup}.
+
+@predefined
+
+@funindex \markup
+@code{\markup},
+@funindex \markuplines
+@code{\markuplines}
+
+@ignore
+@snippets
+
+TODO: add convenient snippets in input/new -vv
+@end ignore
@seealso
-Snippets: @lsrdir{Text,Text}
+Notation Reference: @ref{Formatting text},
+@ref{File structure},
+@ref{Multiple scores in a book},
+@ref{Multi-page markup}.
-Internals Reference: @internalsref{RehearsalMark}.
+Snippets:
+@rlsr{Text}.
+Internals Reference: @rinternals{TextScript}.
-@node Text markup
-@subsection Text markup
+@node Formatting text
+@subsection Formatting text
+
+This section presents basic and advanced text formatting,
+using the @code{\markup} mode specific syntax.
@menu
* Text markup introduction::
-* Nested scores::
-* Page wrapping text::
-* Font selection::
+* Common markup commands::
+* Text alignment::
+* Graphic notation inside markup::
+* Music notation inside markup::
+* Multi-page markup::
@end menu
@node Text markup introduction
@cindex markup text
@cindex typeset text
-Use @code{\markup} to typeset text. Commands are entered with the
-backslash @code{\}. To enter @code{\} and @code{#}, use double
+A @code{\markup} block is used to typeset text with an extensible syntax,
+called @qq{markup mode}.
+Specific commands can be entered in this mode, using the
+backslash @code{\} character.
+@c TODO: move the following sentence (and add an example?) -vv
+To @emph{print} such characters as
+@code{\} and @code{#} in the output, use double
quotation marks.
@lilypond[quote,verbatim,fragment,relative=1]
@end lilypond
@noindent
-See @ref{Overview of text markup commands}, for a list of all
-commands.
+An exhaustive list of @code{\markup}-specific commands can be found in
+@ref{Text markup commands}.
-@code{\markup} is primarily used for @internalsref{TextScript}s,
-but it can also be used anywhere text is called in lilypond
@lilypond[quote,verbatim]
\header{ title = \markup{ \bold { foo \italic { bar! } } } }
}
@end lilypond
-A @code{\markup} command can also be placed on its own, away from
-any @code{\score} block, see @ref{Multiple scores in a book}.
-@lilypond[quote,ragged-right,verbatim]
-\markup{ Here is some text. }
-@end lilypond
@cindex font switching
-The markup in the example demonstrates font switching commands.
-The command @code{\bold} and @code{\italic} apply to the first
-following word only; to apply a command to more than one word,
-enclose the words with braces,
+Some font switching commands are demonstrated here. Such commands
+apply only to the first following word; several words may be affected
+by enclosing them in braces.
@example
\markup @{ \bold @{ hi there @} @}
@end example
+@c TODO: remove the following line and example? -vv
@noindent
For clarity, you can also do this for single arguments, e.g.,
\markup @{ is \italic @{ anyone @} home @}
@end example
-In markup mode you can compose expressions, similar to
+The markup mode can be used to compose expressions, similar to
mathematical expressions, XML documents, and music expressions.
-You can stack expressions grouped vertically with the command
-@code{\column}. Similarly, @code{\center-align} aligns texts by
-their center lines:
+Such expressions can be vertically stacked, horizontally centered,
+or aligned in different ways:
@lilypond[quote,verbatim,fragment,relative=1]
c1^\markup { \column { a bbbb \line { c d } } }
c1^\markup { \line { a b c } }
@end lilypond
-Lists with no previous command are not kept distinct. The
-expression
+Lists with no previous command are not kept distinct. In
+the following example, the two @code{\markup} expressions
+are equivalent:
-@example
-\center-align @{ @{ a b @} @{ c d @} @}
-@end example
-
-@noindent
-
-is equivalent to
+@c TODO: merge these two examples in a @lilypond example -vv
@example
+\center-align @{ @{ a b @} @{ c d @} @}
\center-align @{ a b c d @}
@end example
Some objects have alignment procedures of their own, which cancel
out any effects of alignments applied to their markup arguments as
-a whole. For example, the @internalsref{RehearsalMark} is
+a whole. For example, the @rinternals{RehearsalMark} is
horizontally centered, so using @code{\mark \markup @{ \left-align
.. @}} has no effect.
Some situations (such as dynamic marks) have preset font-related
properties. If you are creating text in such situations, it is
advisable to cancel those properties with @code{normal-text}. See
-@ref{Overview of text markup commands}, for more details.
+@ref{Text markup commands}, for more details.
+
+@ignore
+TODO: here are some commands that could be described here.
+I'm putting them in bulk, prior to working on this section. -vv
+
+\simple
+
+\char
+\fraction
+
+\combine
+\concat
+\put-adjacent
+
+
+\page-ref (see also "Table of contents")
+\fromproperty
+\verbatim-file
+\with-url
+
+\on-the-fly
+\override
+
+
+\null
+\hspace
+
+\lower
+\raise
+\translate
+\translate-scaled
+\rotate
+\transparent
+\whiteout
+@end ignore
@seealso
-This manual: @ref{Overview of text markup commands}.
+This manual: @ref{Text markup commands}.
-Snippets: @lsrdir{Text,Text}
+Snippets:
+@rlsr{Text}.
-Internals Reference: @internalsref{TextScript}.
+Internals Reference: @rinternals{TextScript}.
Init files: @file{scm/@/new@/-markup@/.scm}.
-@refbugs
+@knownissues
Kerning or generation of ligatures is only done when the @TeX{}
backend is used. In this case, LilyPond does not account for them
Syntax errors for markup mode are confusing.
+@node Common markup commands
+@subsubsection Common markup commands
+
+Some basic formatting can be used blah blah
+
+\italic
+\upright
+\bold
+\medium
+\underline
+
+
+@c TODO: what's the difference between the following commands? -vv
+\smallCaps
+\caps
+\fontCaps
+
+
+Some alternate font families can easily be selected:
+
+\sans
+\typewriter
+\roman
+\number (only for numbers, such as fingerings and time signatures)
+@c TODO: add \slashed-digit here? -vv
+
+The size can be blah blah blah
+
+\fontsize
+
+Some predefined font sizes can be used blah blah
+
+\teeny
+\tiny
+\small
+\normalsize
+\large
+\huge
+
+Some shorcuts allow to change the font size relatively to its previous value
+
+\smaller
+\bigger
+\larger
+
+\magnify
+
+Text may be printed as subscript or superscript:
+
+\sub
+\super
+
+To obtain subscripts or superscripts in a normal text size, use
+\normal-size-sub
+\normal-size-super
+
+All these settings (except the size) can be reverted to the default font:
+
+\normal-text
+
+
+@node Text alignment
+@subsubsection Text alignment
+
+Alignment basics:
+\left-align
+\center-align
+\right-align
+
+Horizontal alignment:
+\hcenter
+\general-align
+\halign
+
+
+Vertical alignment:
+\vcenter
+\column
+\dir-column
+
+Building a "large" markup:
+
+\line
+
+\fill-line
+
+\hcenter-in
+
+\pad-around
+\pad-markup
+\pad-to-box
+\pad-x
+
+Alignment inside a "large" markup:
-@node Nested scores
-@subsubsection Nested scores
+\justify-field
+\justify
+\justify-string
+
+\wordwrap-field
+\wordwrap
+\wordwrap-string
+
+@node Graphic notation inside markup
+@subsubsection Graphic notation inside markup
+Graphics around text:
+\box
+\circle
+
+\bracket
+\hbracket
+
+"Standalone" graphics:
+
+\arrow-head
+\draw-line
+\draw-circle
+\filled-box
+\triangle
+\strut
+
+\with-color
+
+
+Advanced graphics:
+\stencil
+
+\postscript
+\epsfile
+
+\with-dimensions
+
+@node Music notation inside markup
+@subsubsection Music notation inside markup
+
+Notes can be printed in markup mode blah blah:
+
+\note
+\note-by-number
+
+Accidental symbols can be obtained easily:
+
+\doubleflat
+\sesquiflat
+\flat
+\semiflat
+\natural
+\semisharp
+\sharp
+\sesquisharp
+\doublesharp
+
+Some other notation objects blah blah
+
+\beam
+\finger
+\dynamic
+\tied-lyric
+\markalphabet
+\markletter
+@c TODO: add \text here? -vv
+
+Any musical symbol can be printed
+
+\musicglyph
+@c TODO: add \lookup here? -vv
+
+
+The markup mode has support for fret diagrams:
+
+\fret-diagram
+\fret-diagram-terse
+\fret-diagram-verbose
+
+An entire @code{\score} block can even be nested in a @code{\markup}
+block. In such a case, the @code{\score} must contain a @code{\layout} block.
+
+
+\score
-It is possible to nest music inside markups, by adding a
-@code{\score} block to a markup expression. Such a score must
-contain a @code{\layout} block.
@lilypond[quote,verbatim,ragged-right]
\relative {
@seealso
-Snippets: @lsrdir{Text,Text}
+Snippets:
+@rlsr{Text}.
-@node Page wrapping text
-@subsubsection Page wrapping text
+@node Multi-page markup
+@subsubsection Multi-page markup
Whereas @code{\markup} is used to enter a non-breakable block of
text, @code{\markuplines} can be used at top-level to enter lines
@code{\markuplines} accepts a list of markup, that is either the
result of a markup list command, or a list of markups or of markup
lists. The built-in markup list commands are described in
-@ref{Overview of text markup list commands}.
+@ref{Text markup list commands}.
@seealso
-This manual: @ref{Overview of text markup list commands}, @ref{New
+This manual: @ref{Text markup list commands}, @ref{New
markup list command definition}.
-Snippets: @lsrdir{Text,Text}
+Snippets:
+@rlsr{Text}.
-@refcommands
+@predefined
@funindex \markuplines
@code{\markuplines}
-@node Font selection
-@subsubsection Font selection
+
+
+@c TODO: move the following subsubsec into NR3 -vv
+@c maybe. -gp
+@node Fonts
+@subsection Fonts
+
+@menu
+* Entire document fonts::
+* Single entry fonts::
+@end menu
+
+@node Entire document fonts
+@subsubsection Entire document fonts
+
+It is also possible to change the default font family for the
+entire document. This is done by calling the
+@code{make-pango-font-tree} from within the @code{\paper} block.
+The function takes names for the font families to use for roman,
+sans serif and monospaced text. For example,
+
+@cindex font families, setting
+@cindex Pango
+
+
+@lilypond[verbatim]
+\paper {
+ myStaffSize = #20
+
+ #(define fonts
+ (make-pango-font-tree "Times New Roman"
+ "Nimbus Sans"
+ "Luxi Mono"
+ (/ myStaffSize 20)))
+}
+
+{
+ c'^\markup { roman: foo \sans bla \typewriter bar }
+}
+@end lilypond
+
+@c we don't do Helvetica / Courier, since GS incorrectly loads
+@c Apple TTF fonts
+
+
+@node Single entry fonts
+@subsubsection Single entry fonts
@cindex font selection
@cindex font magnification
@cindex font magnification
-It is also possible to change the default font family for the
-entire document. This is done by calling the
-@code{make-pango-font-tree} from within the @code{\paper} block.
-The function takes names for the font families to use for roman,
-sans serif and monospaced text. For example,
-
-@cindex font families, setting
-@cindex Pango
-
-
-@lilypond[verbatim]
-\paper {
- myStaffSize = #20
-
- #(define fonts
- (make-pango-font-tree "Times New Roman"
- "Nimbus Sans"
- "Luxi Mono"
- (/ myStaffSize 20)))
-}
-
-{
- c'^\markup { roman: foo \sans bla \typewriter bar }
-}
-@end lilypond
-
-@c we don't do Helvetica / Courier, since GS incorrectly loads
-@c Apple TTF fonts
-
-
-
-@seealso
-
-Snippets: @lsrdir{Text,Text}
-
-
-@node Special text concerns
-@subsection Special text concerns
-
-
-
-@menu
-* New dynamic marks::
-* Text and line spanners::
-@end menu
-
-@node New dynamic marks
-@subsubsection New dynamic marks
-
-It is possible to print new dynamic marks or text that should be
-aligned with dynamics. Use @code{make-dynamic-script} to create
-these marks. Note that the dynamic font only contains the
-characters @code{f,m,p,r,s} and @code{z}.
-
-Some situations (such as dynamic marks) have preset font-related
-properties. If you are creating text in such situations, it is
-advisable to cancel those properties with @code{normal-text}. See
-@ref{Overview of text markup commands}, for more details.
-
-@cindex make-dynamic-script
-
-@lilypond[quote,verbatim,ragged-right]
-sfzp = #(make-dynamic-script "sfzp")
-\relative c' {
- c4 c c\sfzp c
-}
-@end lilypond
-
-@cindex Dynamics, editorial
-@cindex Dynamics, parenthesis
-
-It is also possible to print dynamics in round parenthesis or
-square brackets. These are often used for adding editorial
-dynamics.
-
-@lilypond[quote,verbatim,ragged-right]
-rndf = \markup{ \center-align {\line { \bold{\italic (}
- \dynamic f \bold{\italic )} }} }
-boxf = \markup{ \bracket { \dynamic f } }
-{ c'1_\rndf c'1_\boxf }
-@end lilypond
-
-@seealso
-
-Snippets: @lsrdir{Text,Text}
-
-
-@node Text and line spanners
-@subsubsection Text and line spanners
-
-Some performance indications, e.g., @i{rallentando} and
-@i{accelerando} and @i{trills} are written as text and are
-extended over many measures with lines, sometimes dotted or wavy.
-
-These all use the same routines as the glissando for drawing the
-texts and the lines, and tuning their behavior is therefore also
-done in the same way. It is done with a spanner, and the routine
-responsible for drawing the spanners is
-@code{ly:line-interface::print}. This routine determines the
-exact location of the two @i{span points} and draws a line in
-between, in the style requested.
-
-Here is an example of the different line styles available, and how
-to tune them.
-
-@lilypond[relative=2,ragged-right,verbatim,fragment]
-d2 \glissando d'2
-\once \override Glissando #'style = #'dashed-line
-d,2 \glissando d'2
-\override Glissando #'style = #'dotted-line
-d,2 \glissando d'2
-\override Glissando #'style = #'zigzag
-d,2 \glissando d'2
-\override Glissando #'style = #'trill
-d,2 \glissando d'2
-@end lilypond
-
-The information that determines the end-points is computed
-on-the-fly for every graphic object, but it is possible to
-override these.
-
-@lilypond[relative=2,ragged-right,verbatim,fragment]
-e2 \glissando f
-\once \override Glissando #'bound-details #'right #'Y = #-2
-e2 \glissando f
-@end lilypond
-
-The @code{Glissando} object, like any other using the
-@code{ly:line-interface::print} routine, carries a nested
-association list. In the above statement, the value for @code{Y}
-is set to @code{-2} for the association list corresponding to the
-right end point. Of course, it is also possible to adjust the
-left side with @code{left} instead of @code{right}.
-
-If @code{Y} is not set, the value is computed from the vertical
-position of right attachment point of the spanner.
-
-In case of a line break, the values for the span-points are
-extended with contents of the @code{left-broken} and
-@code{right-broken} sublists, for example
-
-@lilypond[relative=2,ragged-right,verbatim,fragment]
-\override Glissando #'breakable = ##T
-\override Glissando #'bound-details #'right-broken #'Y = #-3
-c1 \glissando \break
-f1
-@end lilypond
-
-The following properties can be used for the
-
-@table @code
-@item Y
-This sets the Y-coordinate of the end point, in staff space. By
-default, it is the center of the bound object, so for a glissando
-it points to the vertical center of the note head.
-
-For horizontal spanners, such as text spanner and trill spanners,
-it is hardcoded to 0.
-
-@item attach-dir
-This determines where the line starts and ends in X-direction,
-relative to the bound object. So, a value of @code{-1} (or
-@code{LEFT}) makes the line start/end at the left side of the note
-head it is attached to.
-
-@item X
-This is the absolute coordinate of the end point. It is usually
-computed on the fly, and there is little use in overriding it.
-
-@item stencil
-Line spanners may have symbols at the beginning or end, which is
-contained in this sub-property. This is for internal use, it is
-recommended to use @code{text}.
-
-@item text
-This is a markup that is evaluated to yield stencil. It is used
-to put @i{cresc.} and @i{tr} on horizontal spanners.
-
-@lilypond[quote,ragged-right,fragment,relative=2,verbatim]
-\override TextSpanner #'bound-details #'left #'text
- = \markup { \small \bold Slower }
-c2\startTextSpan b c a\stopTextSpan
-@end lilypond
-
-@item stencil-align-dir-y
-@item stencil-offset
-Without setting this, the stencil is simply put there at the
-end-point, as defined by the @code{X} and @code{Y} sub properties.
-Setting either @code{stencil-align-dir-y} or @code{stencil-offset}
-will move the symbol at the edge relative to the end point of the
-line
-
-@lilypond[relative=1,fragment,verbatim]
-\override TextSpanner #'bound-details
- #'left #'stencil-align-dir-y = #DOWN
-\override TextSpanner #'bound-details
- #'right #'stencil-align-dir-y = #UP
-
-\override TextSpanner #'bound-details
- #'left #'text = #"gggg"
-\override TextSpanner #'bound-details
- #'right #'text = #"hhhh"
-c4^\startTextSpan c c c \stopTextSpan
-@end lilypond
-
-@item arrow
-Setting this sub property to @code{#t} produce an arrowhead at the
-end of the line.
-
-@item padding
-This sub property controls the space between the specified
-end-point of the line and the actual end. Without padding, a
-glissando would start and end in the center of each note head.
-
-@end table
-
-TODO: add this somewhere
-
-@verbatim
-\new Staff {
- \override TextSpanner #'bound-details #'left-broken #'text = ##f
- \override TextSpanner #'bound-details #'left #'text = \markup {
-"start" }
- c'1 \startTextSpan \break
- c'1
- c'1 \stopTextSpan
-}
-@end verbatim
-
-
-The music function \endSpanners terminates spanners and hairpins
-after exactly one note.
-
-@lilypond[verbatim,quote,ragged-right,relative=2,fragment]
-\endSpanners
-c2 \startTextSpan c2
-c2 \< c2
-@end lilypond
-
-When using \endSpanners it is not necessary to close
-\startTextSpan with \stopTextSpan, nor is it necessary to close
-hairpins with \!.
-
@seealso
-Snippets: @lsrdir{Text,Text}
-
-Internals Reference: @internalsref{TextSpanner},
-@internalsref{Glissando}, @internalsref{VoiceFollower},
-@internalsref{TrillSpanner},
-@internalsref{line-spanner-interface}.
-
-
-
+Snippets:
+@rlsr{Text}.
projects / lilypond.git / blobdiff