version that you are working on. See TRANSLATION for details.
@end ignore
-@c \version "2.11.57"
+@c \version "2.11.61"
@node Staff notation
@section Staff notation
@subsection Displaying staves
This section describes the different methods of creating and
-grouping staves, which are marked at the beginning of each line
-with either a bracket or a brace.
+grouping staves.
@menu
* Instantiating new staves::
* Grouping staves::
-* Deeper nested staff groups::
+* Nested staff groups::
@end menu
modern Gregorian chant. It does not show bar lines.
@lilypond[verbatim,quote,relative=2]
-\new GregorianTranscriptionStaff { c4 d e f }
+\new GregorianTranscriptionStaff { c4 d e f e d }
@end lilypond
@code{RhythmicStaff} creates a single-line staff that only
@rinternals{SystemStartSquare}.
-@node Deeper nested staff groups
-@unnumberedsubsubsec Deeper nested staff groups
+@node Nested staff groups
+@unnumberedsubsubsec Nested staff groups
@cindex staff, nested
@cindex staves, nested
Two additional staff-group contexts are available that can be
nested within a @code{StaffGroup} or @code{ChoirStaff} context:
@code{InnerStaffGroup} and @code{InnerChoirStaff}. These contexts
-create a bracket next to the original bracket of their parent
-staff group.
+create a new bracket adjacent to the bracket of their parent staff
+group.
An @code{InnerStaffGroup} is treated similarly to a
-@code{StaffGroup}; bar lines are connected between each stave
+@code{StaffGroup}; bar lines are connected between each staff
within the context:
@lilypond[verbatim,quote,relative=2]
{ d4 d d d }
@end lilypond
-The vertical position of staff lines and the number of staff lines
-can be defined at the same time. As the following example shows,
-note positions are not influenced by the staff line positions.
-
-@warning{The @code{'line-positions} property overrides the
-@code{'line-count} property. The number of staff lines is
-implicitly defined by the number of elements in the list of values
-for @code{'line-positions}.}
-
-@lilypond[verbatim,quote,relative=1]
-\new Staff \with {
- \override StaffSymbol #'line-positions = #'(7 3 0 -4 -6 -7)
-}
-{ a4 e' f b | d1 }
-@end lilypond
-
Staff line thickness can be modified. The thickness of ledger
lines and stems are also affected, since they depend on staff line
thickness.
{ a4 b c d }
@end lilypond
-The width of a staff can be modified. The unit is one staff
-space. The spacing of objects inside the staff is not affected by
-this setting.
-
-@lilypond[verbatim,quote,relative=1]
-\new Staff \with {
- \override StaffSymbol #'width = #23
-}
-{ a4 e' f b | d1 }
-@end lilypond
-
Further details about the properties of @code{StaffSymbol} can be
-found here: @rinternals{staff-symbol-interface}.
+found in @rinternals{staff-symbol-interface}.
@funindex \startStaff
@funindex \stopStaff
<<
\new Staff = ossia \with {
\remove "Time_signature_engraver"
- \remove "Clef_engraver"
+ \override Clef #'transparent = ##t
fontSize = #-3
\override StaffSymbol #'staff-space = #(magstep -3)
\override StaffSymbol #'thickness = #(magstep -3)
<<
\new Staff = ossia \with {
\remove "Time_signature_engraver"
- \remove "Clef_engraver"
+ \override Clef #'transparent = ##t
fontSize = #-3
\override StaffSymbol #'staff-space = #(magstep -3)
\override StaffSymbol #'thickness = #(magstep -3)
@c perhaps also an example of how to move it horizontally?
-@c TODO add snippet to LSR -pm
-To change the tempo in the MIDI output without printing anything,
-make the metronome marking invisible
-
-@example
-\once \override Score.MetronomeMark #'transparent = ##t
-@end example
-
-@c TODO add snippet to LSR -pm
-To print other metronome markings, use these markup commands
+@lilypondfile[verbatim,lilyquote,texidoc,doctitle]
+{changing-the-tempo-without-a-metronome-mark.ly}
-@lilypond[verbatim,quote,relative=1]
-c4^\markup {
- (
- \smaller \general-align #Y #DOWN \note #"16." #1
- =
- \smaller \general-align #Y #DOWN \note #"8" #1
- ) }
-@end lilypond
+@lilypondfile[verbatim,lilyquote,texidoc,doctitle]
+{creating-metronome-marks-in-markup-mode.ly}
For more details, see @ref{Formatting text}.
default. To center multi-line instrument names,
@code{\center-column} must be used:
-@lilypond[verbatim,quote,relative=2]
+@lilypond[verbatim,quote,indent=1.5\cm,relative=2]
<<
\new Staff {
\set Staff.instrumentName = "Flute"
}
\new Staff {
\set Staff.instrumentName = \markup \center-column {
- Clarinetti
+ Clarinet
\line { "in B" \smaller \flat }
}
c4 b c2
However, if the instrument names are longer, the instrument names
in a staff group may not be centered unless the @code{indent} and
@code{short-indent} settings are increased. For details about
-these settings, see @ref{Page formatting}.
+these settings, see @ref{Horizontal dimensions}.
@lilypond[verbatim,quote,ragged-right]
\layout {
- indent = 2.5\cm
+ indent = 3.0\cm
short-indent = 1.5\cm
}
\relative c'' <<
\new Staff {
- \set Staff.instrumentName = "Flute"
+ \set Staff.instrumentName = "Alto Flute in G"
\set Staff.shortInstrumentName = "Fl."
f2 g4 f \break
g4 f g2
@code{\instrumentSwitch} to create a detailed list of the
necessary changes for the switch. The
@code{\addInstrumentDefinition} command has two arguments: an
-identifying string, and an alist of context properties and values
-to be used for the instrument. It must be placed in the toplevel
-scope. @code{\instrumentSwitch} is used in the music expression
-to declare the instrument switch:
+identifying string, and an association list of context properties
+and values to be used for the instrument. It must be placed in
+the toplevel scope. @code{\instrumentSwitch} is used in the music
+expression to declare the instrument switch:
@lilypond[verbatim,quote,ragged-right]
\addInstrumentDefinition #"contrabassoon"
@seealso
Notation Reference:
-@ref{Page formatting},
+@ref{Horizontal dimensions},
@ref{Modifying context plug-ins}.
Snippets:
@cindex fragments
@cindex cue notes
-Fragments of other parts can be inserted directly into a music
-expression; this is called @emph{quotation}. Before a part can be
-quoted, the @code{\addQuote} command must be used to initialize
-the quoted fragment. This command must be used in the toplevel
-scope. The first argument is an identifying string, and the
-second is a music expression:
+It is very common for one voice to double the some of the music from
+another voice. For example, the first and second violins may play the
+same notes during a passage of music. In LilyPond this is accomplished
+by letting one voice @emph{quote} the other voice without having to
+re-enter it.
+
+Before a part can be quoted, the @code{\addQuote} command must be used
+to initialize the quoted fragment. This command must be used in the
+toplevel scope. The first argument is an identifying string, and the
+second is a music expression:
@example
flute = \relative c'' @{
\addQuote "flute" @{ \flute @}
@end example
-The @code{\quoteDuring} command is used to indicate when the
-quotation should take place. The corresponding measures from the
-quotation are inserted into the music expression. The syntax is
-similar to @code{\addQuote}:
+The @code{\quoteDuring} command is used to indicate the point where the
+quotation begins. It is followed by two arguments: the name of the
+quoted voice, as defined with @code{\addQuote}, and a music expression
+that indicates the duration of the quote, usually spacer rests or
+multi-measure rests. The corresponding music from the quoted voice is
+inserted into the music expression:
@lilypond[verbatim,quote]
flute = \relative c'' {
process them in different ways. For details about this procedure,
see @ref{Using tags}.
-@c add to snippets, possibly. It might already be there. -pm
-@c
-@c The type of events that are present in the quoted music can be
-@c trimmed with the @code{quotedEventTypes} property. The default
-@c value is @code{(note-event rest-event)}, which means that only
-@c notes and rests of the quoted voice end up in the
-@c @code{\quoteDuring}. Setting
-@c
-@c @example
-@c \set Staff.quotedEventTypes =
-@c #'(note-event articulation-event dynamic-event)
-@c @end example
-@c
-@c @noindent
-@c will quote notes (but no rests), together with scripts and
-@c dynamics.
-
@snippets
@lilypondfile[verbatim,lilyquote,texidoc,doctitle]
{quoting-another-voice-with-transposition.ly}
+@cindex note-event
+@cindex articulation-event
+@cindex dynamic-event
+@cindex rest-event
+@funindex quotedEventTypes
+
@lilypondfile[verbatim,lilyquote,texidoc,doctitle]
{quoting-another-voice.ly}
notes into a part. The syntax is as follows:
@example
- \cueDuring #@var{partname} #@var{voice} @var{music}
+\cueDuring #@var{partname} #@var{voice} @var{music}
@end example
This command copies the corresponding measures from @var{partname}
oboe = \relative c''' {
g4 r8 e16 f e4 d
}
-\addQuote oboe { \oboe }
+\addQuote "oboe" { \oboe }
\new Staff \relative c'' <<
\new CueVoice \with {
flute = \relative c''' {
r2 cis2 r2 dis2
}
-\addQuote flute { \flute }
+\addQuote "flute" { \flute }
\new Voice \relative c'' {
\killCues {